1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
|
Marvell Armada CP110 System Controller
======================================
The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
SoCs. It contains system controllers, which provide several registers
giving access to numerous features: clocks, pin-muxing and many other
SoC configuration items. This DT binding allows to describe these
system controllers.
For the top level node:
- compatible: must be: "syscon", "simple-mfd";
- reg: register area of the CP110 system controller
SYSTEM CONTROLLER 0
===================
Clocks:
-------
The Device Tree node representing this System Controller 0 provides a
number of clocks:
- a set of core clocks
- a set of gatable clocks
Those clocks can be referenced by other Device Tree nodes using two
cells:
- The first cell must be 0 or 1. 0 for the core clocks and 1 for the
gatable clocks.
- The second cell identifies the particular core clock or gatable
clocks.
The following clocks are available:
- Core clocks
- 0 0 APLL
- 0 1 PPv2 core
- 0 2 EIP
- 0 3 Core
- 0 4 NAND core
- 0 5 SDIO core
- Gatable clocks
- 1 0 Audio
- 1 1 Comm Unit
- 1 2 NAND
- 1 3 PPv2
- 1 4 SDIO
- 1 5 MG Domain
- 1 6 MG Core
- 1 7 XOR1
- 1 8 XOR0
- 1 9 GOP DP
- 1 11 PCIe x1 0
- 1 12 PCIe x1 1
- 1 13 PCIe x4
- 1 14 PCIe / XOR
- 1 15 SATA
- 1 16 SATA USB
- 1 17 Main
- 1 18 SD/MMC/GOP
- 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART)
- 1 22 USB3H0
- 1 23 USB3H1
- 1 24 USB3 Device
- 1 25 EIP150
- 1 26 EIP197
Required properties:
- compatible: must be:
"marvell,cp110-clock"
- #clock-cells: must be set to 2
Pinctrl:
--------
For common binding part and usage, refer to the file
Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
Required properties:
- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl",
"marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl"
depending on the specific variant of the SoC being used.
Available mpp pins/groups and functions:
Note: brackets (x) are not part of the mpp name for marvell,function and given
only for more detailed description in this document.
name pins functions
================================================================================
mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk)
mpp17 17 gpio, dev(ad5), ge0(txd3)
mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
mpp20 20 gpio, dev(ad2), ge0(txd0)
mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
mpp24 24 gpio, dev(a0), au(i2slrclk)
mpp25 25 gpio, dev(oen), au(i2sdo_spdifo)
mpp26 26 gpio, dev(wen0), au(i2sbclk)
mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
mpp46 46 gpio, ge1(txd1), uart1(rts)
mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect)
mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect)
mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
GPIO:
-----
For common binding part and usage, refer to
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
Required properties:
- compatible: "marvell,armada-8k-gpio"
- offset: offset address inside the syscon block
Example:
CP110_LABEL(syscon0): system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>;
CP110_LABEL(clk): clock {
compatible = "marvell,cp110-clock";
#clock-cells = <2>;
};
CP110_LABEL(pinctrl): pinctrl {
compatible = "marvell,armada-8k-cpm-pinctrl";
};
CP110_LABEL(gpio1): gpio@100 {
compatible = "marvell,armada-8k-gpio";
offset = <0x100>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
};
};
SYSTEM CONTROLLER 1
===================
Thermal:
--------
The thermal IP can probe the temperature all around the processor. It
may feature several channels, each of them wired to one sensor.
It is possible to setup an overheat interrupt by giving at least one
critical point to any subnode of the thermal-zone node.
For common binding part and usage, refer to
Documentation/devicetree/bindings/thermal/thermal*.yaml
Required properties:
- compatible: must be one of:
* marvell,armada-cp110-thermal
- reg: register range associated with the thermal functions.
Optional properties:
- interrupts-extended: overheat interrupt handle. Should point to
a line of the ICU-SEI irqchip (116 is what is usually used by the
firmware). The ICU-SEI will redirect towards interrupt line #37 of the
AP SEI which is shared across all CPs.
See interrupt-controller/interrupts.txt
- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
to this IP and represents the channel ID. There is one sensor per
channel. O refers to the thermal IP internal channel.
Example:
CP110_LABEL(syscon1): system-controller@6f8000 {
compatible = "syscon", "simple-mfd";
reg = <0x6f8000 0x1000>;
CP110_LABEL(thermal): thermal-sensor@70 {
compatible = "marvell,armada-cp110-thermal";
reg = <0x70 0x10>;
interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <1>;
};
};
|
