blob: efa0820e2469fc5be17727f788de725d021e9cf8 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
|
Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
Required properties:
- compatible : Must be equal to one of the following:
"azoteq,iqs550"
"azoteq,iqs572"
"azoteq,iqs525"
- reg : I2C slave address for the device.
- interrupts : GPIO to which the device's active-high RDY
output is connected (see [0]).
- reset-gpios : GPIO to which the device's active-low NRST
input is connected (see [1]).
Optional properties:
- touchscreen-min-x : See [2].
- touchscreen-min-y : See [2].
- touchscreen-size-x : See [2]. If this property is omitted, the
maximum x-coordinate is specified by the
device's "X Resolution" register.
- touchscreen-size-y : See [2]. If this property is omitted, the
maximum y-coordinate is specified by the
device's "Y Resolution" register.
- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of
the deltas across all channels impacted by a
touch event. A channel's delta is calculated
as its count value minus a reference, where
the count value is inversely proportional to
the channel's capacitance.
- touchscreen-fuzz-x : See [2].
- touchscreen-fuzz-y : See [2].
- touchscreen-fuzz-pressure : See [2].
- touchscreen-inverted-x : See [2]. Inversion is applied relative to that
which may already be specified by the device's
FLIP_X and FLIP_Y register fields.
- touchscreen-inverted-y : See [2]. Inversion is applied relative to that
which may already be specified by the device's
FLIP_X and FLIP_Y register fields.
- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that
which may already be specified by the device's
SWITCH_XY_AXIS register field.
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Example:
&i2c1 {
/* ... */
touchscreen@74 {
compatible = "azoteq,iqs550";
reg = <0x74>;
interrupt-parent = <&gpio>;
interrupts = <17 4>;
reset-gpios = <&gpio 27 1>;
touchscreen-size-x = <640>;
touchscreen-size-y = <480>;
touchscreen-max-pressure = <16000>;
};
/* ... */
};
|
