Adding upstream version 3.5.24.upstream/3.5.24

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 166 insertions, 0 deletions

diff --git a/man/man5/cidr_table.5 b/man/man5/cidr_table.5
new file mode 100644
index 0000000..fae30fb
--- /dev/null
+++ b/man/man5/cidr_table.5
@@ -0,0 +1,166 @@
+.TH CIDR_TABLE 5 
+.ad
+.fi
+.SH NAME
+cidr_table
+\-
+format of Postfix CIDR tables
+.SH "SYNOPSIS"
+.na
+.nf
+\fBpostmap \-q "\fIstring\fB" cidr:/etc/postfix/\fIfilename\fR
+
+\fBpostmap \-q \- cidr:/etc/postfix/\fIfilename\fB <\fIinputfile\fR
+.SH DESCRIPTION
+.ad
+.fi
+The Postfix mail system uses optional lookup tables.
+These tables are usually in \fBdbm\fR or \fBdb\fR format.
+Alternatively, lookup tables can be specified in CIDR
+(Classless Inter\-Domain Routing) form. In this case, each
+input is compared against a list of patterns. When a match
+is found, the corresponding result is returned and the search
+is terminated.
+
+To find out what types of lookup tables your Postfix system
+supports use the "\fBpostconf \-m\fR" command.
+
+To test lookup tables, use the "\fBpostmap \-q\fR" command as
+described in the SYNOPSIS above.
+.SH "TABLE FORMAT"
+.na
+.nf
+.ad
+.fi
+The general form of a Postfix CIDR table is:
+.IP "\fIpattern     result\fR"
+When a search string matches the specified \fIpattern\fR, use
+the corresponding \fIresult\fR value. The \fIpattern\fR must be
+in \fInetwork/prefix\fR or \fInetwork_address\fR form (see
+ADDRESS PATTERN SYNTAX below).
+.IP "\fB!\fIpattern     result\fR"
+When a search string does not match the specified \fIpattern\fR,
+use the specified \fIresult\fR value. The \fIpattern\fR must
+be in \fInetwork/prefix\fR or \fInetwork_address\fR form (see
+ADDRESS PATTERN SYNTAX below).
+.sp
+This feature is available in Postfix 3.2 and later.
+.IP "\fBif \fIpattern\fR"
+.IP "\fBendif\fR"
+When a search string matches the specified \fIpattern\fR, match
+that search string against the patterns between \fBif\fR and
+\fBendif\fR.  The \fIpattern\fR must be in \fInetwork/prefix\fR or
+\fInetwork_address\fR form (see ADDRESS PATTERN SYNTAX below). The
+\fBif\fR..\fBendif\fR can nest.
+.sp
+Note: do not prepend whitespace to text between
+\fBif\fR..\fBendif\fR.
+.sp
+This feature is available in Postfix 3.2 and later.
+.IP "\fBif !\fIpattern\fR"
+.IP "\fBendif\fR"
+When a search string does not match the specified \fIpattern\fR,
+match that search string against the patterns between \fBif\fR and
+\fBendif\fR. The \fIpattern\fR must be in \fInetwork/prefix\fR or
+\fInetwork_address\fR form (see ADDRESS PATTERN SYNTAX below). The
+\fBif\fR..\fBendif\fR can nest.
+.sp
+Note: do not prepend whitespace to text between
+\fBif\fR..\fBendif\fR.
+.sp
+This feature is available in Postfix 3.2 and later.
+.IP "blank lines and comments"
+Empty lines and whitespace\-only lines are ignored, as
+are lines whose first non\-whitespace character is a `#'.
+.IP "multi\-line text"
+A logical line starts with non\-whitespace text. A line that
+starts with whitespace continues a logical line.
+.SH "TABLE SEARCH ORDER"
+.na
+.nf
+.ad
+.fi
+Patterns are applied in the order as specified in the table, until a
+pattern is found that matches the search string.
+.SH "ADDRESS PATTERN SYNTAX"
+.na
+.nf
+.ad
+.fi
+Postfix CIDR tables are pattern\-based. A pattern is either
+a \fInetwork_address\fR which requires an exact match, or a
+\fInetwork_address/prefix_length\fR where the \fIprefix_length\fR
+part specifies the length of the \fInetwork_address\fR prefix
+that must be matched (the other bits in the \fInetwork_address\fR
+part must be zero).
+
+An IPv4 network address is a sequence of four decimal octets
+separated by ".", and an IPv6 network address is a sequence
+of three to eight hexadecimal octet pairs separated by ":"
+or "::", where the latter is short\-hand for a sequence of
+one or more all\-zero octet pairs. The pattern 0.0.0.0/0
+matches every IPv4 address, and ::/0 matches every IPv6
+address.  IPv6 support is available in Postfix 2.2 and
+later.
+
+Before comparisons are made, lookup keys and table entries
+are converted from string to binary. Therefore, IPv6 patterns
+will be matched regardless of leading zeros (a leading zero in
+an IPv4 address octet indicates octal notation).
+
+Note: address information may be enclosed inside "[]" but
+this form is not required.
+.SH "EXAMPLE SMTPD ACCESS MAP"
+.na
+.nf
+.nf
+/etc/postfix/main.cf:
+    smtpd_client_restrictions = ... cidr:/etc/postfix/client.cidr ...
+
+/etc/postfix/client.cidr:
+    # Rule order matters. Put more specific whitelist entries
+    # before more general blacklist entries.
+    192.168.1.1             OK
+    192.168.0.0/16          REJECT
+    2001:db8::1             OK
+    2001:db8::/32           REJECT
+.fi
+.SH "SEE ALSO"
+.na
+.nf
+postmap(1), Postfix lookup table manager
+regexp_table(5), format of regular expression tables
+pcre_table(5), format of PCRE tables
+.SH "README FILES"
+.na
+.nf
+.ad
+.fi
+Use "\fBpostconf readme_directory\fR" or
+"\fBpostconf html_directory\fR" to locate this information.
+.na
+.nf
+DATABASE_README, Postfix lookup table overview
+.SH HISTORY
+.ad
+.fi
+CIDR table support was introduced with Postfix version 2.1.
+.SH "AUTHOR(S)"
+.na
+.nf
+The CIDR table lookup code was originally written by:
+Jozsef Kadlecsik
+KFKI Research Institute for Particle and Nuclear Physics
+POB. 49
+1525 Budapest, Hungary
+
+Adopted and adapted by:
+Wietse Venema
+IBM T.J. Watson Research
+P.O. Box 704
+Yorktown Heights, NY 10598, USA
+
+Wietse Venema
+Google, Inc.
+111 8th Avenue
+New York, NY 10011, USA