From 5e61585d76ae77fd5e9e96ebabb57afa4d74880d Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 14:06:34 +0200 Subject: Adding upstream version 3.5.24. Signed-off-by: Daniel Baumann --- proto/TLS_README.html | 3259 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3259 insertions(+) create mode 100644 proto/TLS_README.html (limited to 'proto/TLS_README.html') diff --git a/proto/TLS_README.html b/proto/TLS_README.html new file mode 100644 index 0000000..040fdfd --- /dev/null +++ b/proto/TLS_README.html @@ -0,0 +1,3259 @@ + + + + + + +Postfix TLS Support + + + + + + + +

Postfix TLS Support +

+ +
+ +

What Postfix TLS support does for you

+ +

Transport Layer Security (TLS, formerly called SSL) provides +certificate-based authentication and encrypted sessions. An +encrypted session protects the information that is transmitted with +SMTP mail or with SASL authentication.

+ +

NOTE: By turning on TLS support in Postfix, you not only get +the ability to encrypt mail and to authenticate remote SMTP clients +or servers. You also turn on hundreds of thousands of lines of +OpenSSL library code. Assuming that OpenSSL is written as carefully +as Wietse's own code, every 1000 lines introduce one additional bug +into Postfix.

+ +

Topics covered in this document:

+ + + +

And last but not least, for the impatient:

+ + + +

How Postfix TLS support works

+ +

The diagram below shows the main elements of the Postfix TLS +architecture and their relationships. Colored boxes with numbered +names represent Postfix daemon programs. Other colored boxes +represent storage elements.

+ + + +

Not shown in the figure are the tlsproxy(8) server and the +postscreen(8) server. These use TLS in the same manner as smtpd(8). +

+ + + + + + + + + + + + +
Network->
smtpd(8)
  		+ + <---seed----

<-key/cert->
tlsmgr(8)
  		----seed--->

<-key/cert-> + +
smtp(8)
+  		->Network
+ + /
/
+		 |
|		 + + +
\
\
+smtpd
session
key cache 		PRNG
state
file 		smtp
session
key cache +
+ +

SMTP Server specific settings

+ +

Topics covered in this section:

+ + + +

Server-side certificate and private +key configuration

+ +

In order to use TLS, the Postfix SMTP server generally needs +a certificate and a private key. Both must be in "PEM" format. The +private key must not be encrypted, meaning: the key must be accessible +without a password. The certificate and private key may be in the same +file, in which case the certificate file should be owned by "root" and +not be readable by any other user. If the key is stored separately, +this access restriction applies to the key file only, and the +certificate file may be "world-readable".

+ +

Public Internet MX hosts without certificates signed by a +well-known public CA must still generate, and be prepared to present +to most clients, a self-signed or private-CA signed certificate. +The remote SMTP client will generally not be able to verify the +self-signed certificate, but unless the client is running Postfix +or similar software, it will only negotiate TLS ciphersuites that +require a server certificate.

+ +

For servers that are not public Internet MX hosts, Postfix +supports configurations with no certificates. This entails the use of +just the anonymous TLS ciphers, which are not supported by typical SMTP +clients. Since some clients may not fall back to plain text after a TLS +handshake failure, a certificate-less Postfix SMTP server will be unable +to receive email from some TLS-enabled clients. To avoid accidental +configurations with no certificates, Postfix enables certificate-less +operation only when the administrator explicitly sets +"smtpd_tls_cert_file = none". This ensures that new Postfix SMTP server +configurations will not accidentally enable TLS without certificates.

+ +

Note that server certificates are not optional in TLS 1.3. To +run without certificates you'd have to disable the TLS 1.3 protocol by +including '!TLSv1.3' in "smtpd_tls_protocols" and perhaps also +"smtpd_tls_mandatory_protocols". It is simpler instead to just +configure a certificate chain. Certificate-less operation is not +recommended.

+ +

RSA, DSA and ECDSA (Postfix ≥ 2.6) certificates are supported. +Most sites only have RSA certificates. You can configure all three +at the same time, in which case the ciphersuite negotiated with the +remote SMTP client determines which certificate is used. If your +DNS zone is signed, and you want to publish DANE TLSA (RFC 6698, +RFC 7671, RFC 7672) records, these must match all of the configured +certificate chains. Since the best practice is to publish "3 1 1" +certificate associations, create a separate TLSA record to match +each public-key certificate digest.

+ +

Creating the server certificate file

+ +

To verify the Postfix SMTP server certificate, the remote SMTP +client must receive the issuing CA certificates via the TLS handshake +or via public-key infrastructure. This means that the Postfix server +public-key certificate file must include the server certificate +first, then the issuing CA(s) (bottom-up order). The Postfix SMTP +server certificate must be usable as SSL server certificate and +hence pass the "openssl verify -purpose sslserver ..." test. +

+ +

The examples that follow show how to create a server certificate +file. We assume that the certificate for "server.example.com" was +issued by "intermediate CA" which itself has a certificate issued +by "root CA".

+ + + +

For instructions on how to compute the digest of a certificate +or its public key for use in TLSA records, see the documentation of +the smtpd_tls_fingerprint_digest main.cf parameter.

+ +

When a new key or certificate is generated, an additional TLSA +record with the new digest must be published in advance of the +actual deployment of the new key or certificate on the server. You +must allow sufficient time for any TLSA RRsets with only the old +digest to expire from DNS caches. The safest practice is to wait +until the DNSSEC signature on the previous TLSA RRset expires, and +only then switch the server to use new keys published in the updated +TLSA RRset. Once the new certificate trust chain and private key +are in effect, the DNS should be updated once again to remove the +old digest from the TLSA RRset.

+ +

If you want the Postfix SMTP server to accept remote SMTP client +certificates issued by one or more root CAs, append the root +certificate to $smtpd_tls_CAfile or install it in the $smtpd_tls_CApath +directory.

+ +

Configuring the server certificate and key files

+ +

Example: Postfix ≥ 3.4 all-in-one chain file(s). One or more +chain files that start with a key that is immediately followed by the +corresponding certificate and any additional issuer certificates. A +single file can hold multiple (key, cert, [chain]) sequences, one +per algorithm. It is typically simpler to keep the chain for each +algorithm in its own file. Most users are likely to deploy just a +single RSA chain, but with OpenSSL 1.1.1, it is possible to deploy up to +five chains, one each for RSA, ECDSA, ED25519, ED448 and even the +obsolete DSA.

+ +
+
+    # Postfix ≥ 3.4.  Preferred configuration interface.  Each file
+    # starts with the private key, followed by the corresponding
+    # certificate, and any intermediate issuer certificates. The root CA
+    # cert may also be needed when published as a DANE trust anchor.
+    #
+    smtpd_tls_chain_files =
+        /etc/postfix/rsa.pem,
+        /etc/postfix/ecdsa.pem,
+        /etc/postfix/ed25519.pem,
+        /etc/postfix/ed448.pem
+
+
+ +

You can also store the keys separately from their certificates, again +provided each is listed before the corresponding certificate chain. Storing a +key and its associated certificate chain in separate files is not recommended, +because this is prone to race conditions during key rollover, as there is no +way to update multiple files atomically.

+ +
+
+    # Postfix ≥ 3.4.
+    # Storing keys separately from the associated certificates is not
+    # recommended.
+    smtpd_tls_chain_files =
+        /etc/postfix/rsakey.pem,
+        /etc/postfix/rsacerts.pem,
+        /etc/postfix/ecdsakey.pem,
+        /etc/postfix/ecdsacerts.pem
+
+
+ +

The below examples show the legacy algorithm-specific configurations +for Postfix 3.3 and older. With Postfix ≤ 3.3, even if the key is +stored in the same file as the certificate, the file is read twice and a +(brief) race condition still exists during key rollover. While Postfix +≥ 3.4 avoids the race when the key and certificate are in the same +file, you should use the new "smtpd_tls_chain_files" interface shown +above.

+ +

RSA key and certificate examples:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_cert_file = /etc/postfix/server.pem
+    smtpd_tls_key_file = $smtpd_tls_cert_file
+
+
+ +

Their DSA counterparts:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_dcert_file = /etc/postfix/server-dsa.pem
+    smtpd_tls_dkey_file = $smtpd_tls_dcert_file
+
+
+ +

Their ECDSA counterparts (Postfix ≥ 2.6 + OpenSSL ≥ 1.0.0):

+ +
+
+/etc/postfix/main.cf:
+    # Some clients will not be ECDSA capable, so you will likely still need
+    # an RSA certificate and private key.
+    #
+    smtpd_tls_eccert_file = /etc/postfix/server-ecdsa.pem
+    smtpd_tls_eckey_file = $smtpd_tls_eccert_file
+
+
+ +

TLS without certificates for servers serving exclusively +anonymous-cipher capable clients:

+ +
+
+/etc/postfix/main.cf:
+    # Not recommended: breaks TLS 1.3 and clients that don't support
+    # anonymous cipher suites.
+    smtpd_tls_cert_file = none
+
+
+ +

To verify a remote SMTP client certificate, the Postfix SMTP +server needs to trust the certificates of the issuing Certification +Authorities. These certificates in "PEM" format can be stored in a +single $smtpd_tls_CAfile or in multiple files, one CA per file in +the $smtpd_tls_CApath directory. If you use a directory, don't forget +to create the necessary "hash" links with:

+ +
+
+# $OPENSSL_HOME/bin/c_rehash /path/to/directory 
+
+
+ +

The $smtpd_tls_CAfile contains the CA certificates of one or +more trusted CAs. The file is opened (with root privileges) before +Postfix enters the optional chroot jail and so need not be accessible +from inside the chroot jail.

+ +

Additional trusted CAs can be specified via the $smtpd_tls_CApath +directory, in which case the certificates are read (with $mail_owner +privileges) from the files in the directory when the information +is needed. Thus, the $smtpd_tls_CApath directory needs to be +accessible inside the optional chroot jail.

+ +

When you configure the Postfix SMTP server to request client certificates, the DNs of Certification +Authorities in $smtpd_tls_CAfile are sent to the client, in order to allow +it to choose an identity signed by a CA you trust. If no $smtpd_tls_CAfile +is specified, no preferred CA list is sent, and the client is free to +choose an identity signed by any CA. Many clients use a fixed identity +regardless of the preferred CA list and you may be able to reduce TLS +negotiation overhead by installing client CA certificates mostly or +only in $smtpd_tls_CApath. In the latter case you need not specify a +$smtpd_tls_CAfile.

+ +

Note, that unless client certificates are used to allow greater +access to TLS authenticated clients, it is best to not ask for +client certificates at all, as in addition to increased overhead +some clients (notably in some cases qmail) are unable to complete +the TLS handshake when client certificates are requested.

+ +

Example:

+
+
+/etc/postfix/main.cf:
+    smtpd_tls_CAfile = /etc/postfix/CAcert.pem
+    smtpd_tls_CApath = /etc/postfix/certs
+
+
+ +

Server-side forward-secrecy configuration

+ +

If you want to take maximal advantage of ciphers that offer forward secrecy see +the Getting +started section of FORWARD_SECRECY_README. The +full document conveniently presents all information about Postfix +forward secrecy support in one place: what forward secrecy is, how +to tweak settings, and what you can expect to see when Postfix uses +ciphers with forward secrecy.

+ +

Server-side TLS activity logging

+ +

To get additional information about Postfix SMTP server TLS +activity you can increase the log level from 0..4. Each logging +level also includes the information that is logged at a lower +logging level.

+ +
+ + + + + + + + + + + + + + + + +
Level Postfix 2.9 and later Earlier +releases.
0 Disable +logging of TLS activity.
1 Log only a summary +message on TLS handshake completion — no logging of client +certificate trust-chain verification errors if client certificate +verification is not required. Log the summary +message, peer certificate summary information and unconditionally log +trust-chain verification errors.
2 Also +log levels during TLS negotiation.
3 Also +log hexadecimal and ASCII dump of TLS negotiation process.
4 Also +log hexadecimal and ASCII dump of complete transmission after +STARTTLS.
+ +
+ +

Use log level 3 only in case of problems. Use of log level 4 is +strongly discouraged.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_loglevel = 0
+
+
+ +

To include information about the protocol and cipher used as +well as the client and issuer CommonName into the "Received:" +message header, set the smtpd_tls_received_header variable to true. +The default is no, as the information is not necessarily authentic. +Only information recorded at the final destination is reliable, +since the headers may be changed by intermediate servers.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_received_header = yes
+
+
+ +

Enabling TLS in the Postfix SMTP server

+ +

By default, TLS is disabled in the Postfix SMTP server, so no +difference to plain Postfix is visible. Explicitly switch it on +with "smtpd_tls_security_level = may".

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_security_level = may
+
+
+ +

With this, the Postfix SMTP server announces STARTTLS support to +remote SMTP clients, but does not require that clients use TLS encryption. +

+ +

Note: when an unprivileged user invokes "sendmail -bs", STARTTLS +is never offered due to insufficient privileges to access the Postfix +SMTP server +private key. This is intended behavior.

+ +

You can ENFORCE the use of TLS, +so that the Postfix SMTP server announces STARTTLS and accepts no +mail without TLS encryption, by setting +"smtpd_tls_security_level = encrypt". According to RFC 2487 this +MUST NOT be applied in case +of a publicly-referenced Postfix SMTP server. This option is off +by default and should only seldom be used.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_security_level = encrypt
+
+
+ +

TLS is sometimes used in the non-standard "wrapper" mode where +a server always uses TLS, instead of announcing STARTTLS support +and waiting for remote SMTP clients to request TLS service. Some +clients, namely +Outlook [Express] prefer the "wrapper" mode. This is true for OE +(Win32 < 5.0 and Win32 >=5.0 when run on a port<>25 +and OE (5.01 Mac on all ports).

+ +

It is strictly discouraged to use this mode from main.cf. If +you want to support this service, enable a special port in master.cf +and specify "-o smtpd_tls_wrappermode=yes" (note: no space around +the "=") as an smtpd(8) command line option. Port 465 (smtps) was +once chosen for this feature. +

+ +

Example:

+ +
+
+/etc/postfix/master.cf:
+    smtps    inet  n       -       n       -       -       smtpd
+      -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
+
+
+ +

Client certificate verification

+ +

To receive a remote SMTP client certificate, the Postfix SMTP +server must explicitly ask for one (any contents of $smtpd_tls_CAfile +are also sent to the client as a hint for choosing a certificate from +a suitable CA). Unfortunately, Netscape clients will either complain +if no matching client certificate is available or will offer the user +client a list of certificates to choose from. Additionally some MTAs +(notably some versions of qmail) are unable to complete TLS negotiation +when client certificates are requested, and abort the SMTP session. So +this option is "off" by default. You will however need the certificate +if you want to use certificate based relaying with, for example, the +permit_tls_clientcerts feature. A server that wants client certificates +must first present its own certificate. While Postfix by default +offers anonymous ciphers to remote SMTP clients, these are automatically +suppressed +when the Postfix SMTP server is configured to ask for client +certificates.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_ask_ccert = yes
+    smtpd_tls_security_level = may
+
+
+ +

When TLS is enforced you may also decide +to REQUIRE a remote SMTP client certificate for all TLS connections, +by setting "smtpd_tls_req_ccert = yes". This feature implies +"smtpd_tls_ask_ccert = yes". When TLS is not enforced, +"smtpd_tls_req_ccert = yes" is ignored and a warning is +logged.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_req_ccert = yes
+    smtpd_tls_security_level = encrypt
+
+
+ +

The client certificate verification depth is specified with the +main.cf smtpd_tls_ccert_verifydepth parameter. The default verification +depth is 9 (the OpenSSL default), for compatibility with Postfix +versions before 2.5 where smtpd_tls_ccert_verifydepth was ignored. +When you configure trust in a +root CA, it is not necessary to explicitly trust intermediary CAs signed +by the root CA, unless $smtpd_tls_ccert_verifydepth is less than the +number of CAs in the certificate chain for the clients of interest. With +a verify depth of 1 you can only verify certificates directly signed +by a trusted CA, and all trusted intermediary CAs need to be configured +explicitly. With a verify depth of 2 you can verify clients signed by a +root CA or a direct intermediary CA (so long as the client is correctly +configured to supply its intermediate CA certificate).

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_ccert_verifydepth = 2
+
+
+ +

Supporting AUTH over TLS only

+ +

Sending AUTH data over an unencrypted channel poses a security +risk. When TLS layer encryption is required +("smtpd_tls_security_level = encrypt"), the Postfix SMTP server will +announce and accept AUTH only after the TLS layer has been activated +with STARTTLS. When TLS layer encryption is optional +("smtpd_tls_security_level = may"), it may however still be useful +to only offer AUTH when TLS is active. To maintain compatibility +with non-TLS clients, the default is to accept AUTH without encryption. +In order to change this behavior, set +"smtpd_tls_auth_only = yes".

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_auth_only = no
+
+
+ +

Server-side TLS session cache

+ +

The Postfix SMTP server and the remote SMTP client negotiate a +session, which takes some computer time and network bandwidth. SSL +protocol versions other than SSLv2 support resumption of cached +sessions. Not only is this more CPU and bandwidth efficient, it +also reduces latency as only one network round-trip is used to +resume a session while it takes two round-trips to create a session +from scratch.

+ +

Since Postfix uses multiple smtpd(8) service processes, an +in-memory cache is not sufficient for session re-use. Clients store +at most one cached session per server and are very unlikely to +repeatedly connect to the same server process. Thus session caching +in the Postfix SMTP server generally requires a shared cache (an +alternative available with Postfix ≥ 2.11 is described below). +

+ +

To share the session information between multiple +smtpd(8) processes, a session cache database is used. You +can specify any database type that can store objects of several +kbytes and that supports the sequence operator. DBM databases are +not suitable because they can only store small objects. The cache +is maintained by the tlsmgr(8) process, so there is no problem with +concurrent access. Session caching is highly recommended, because +the cost of repeatedly negotiating TLS session keys is high.

+ +

Starting with Postfix 2.11, linked with a compatible OpenSSL +library (at least 0.9.8h, preferably 1.0.0 or later) the Postfix +SMTP server supports RFC 5077 TLS session resumption without +server-side state when the remote SMTP client also supports RFC +5077. The session is encrypted by the server in a session +ticket returned to client for storage. When a client sends a +valid session ticket, the server decrypts it and resumes the session, +provided neither the ticket nor the session have expired. This +makes it possible to resume cached sessions without allocating space +for a shared database on the server. Consequently, for Postfix +≥ 2.11 the smtpd_tls_session_cache_database parameter should +generally be left empty. Session caching can be disabled by setting +the session cache timeout to zero, otherwise the timeout must be +at least 2 minutes and at most 100 days.

+ +

Note, session tickets can only be negotiated if the client +disables SSLv2 and does not use the legacy SSLv2 compatible HELLO +message. This is true by default with the Postfix ≥ 2.6 SMTP +client.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_session_cache_database = btree:/var/lib/postfix/smtpd_scache
+
+
+ +

Note: as of version 2.5, Postfix no longer uses root privileges +when opening this file. The file should now be stored under the +Postfix-owned data_directory. As a migration aid, an attempt to +open the file under a non-Postfix directory is redirected to the +Postfix-owned data_directory, and a warning is logged.

+ +

Cached Postfix SMTP server session information expires after +a certain amount of time. Postfix/TLS does not use the OpenSSL +default of 300s, but a longer time of 3600sec (=1 hour). RFC 2246 +recommends a maximum of 24 hours.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_session_cache_timeout = 3600s
+
+
+ +

As of Postfix 2.11 this setting cannot exceed 100 days. If set +≤ 0, session caching is disabled. If set to a positive value +less than 2 minutes, the minimum value of 2 minutes is used instead.

+ +

When the Postfix SMTP server does not save TLS sessions to an +external cache database, client-side session caching is unlikely +to be useful. To reduce waste of client resources, the Postfix SMTP server can +be configured to not issue TLS session ids. By default the Postfix +SMTP server always issues TLS session ids. This works around known +interoperability issues with some MUAs, and prevents possible +interoperability issues with other MTAs.

+ +

Example:

+ +
+
+    smtpd_tls_always_issue_session_ids = no
+
+
+ +

Server access control

+ +

Postfix TLS support introduces three additional features for +Postfix SMTP server access control:

+ +
+ +
+ +
permit_tls_clientcerts

Allow the remote SMTP +client request if the client certificate fingerprint or certificate +public key fingerprint (Postfix 2.9 and later) is listed in the +client certificate table (see relay_clientcerts discussion below). +

+ +
permit_tls_all_clientcerts

Allow the remote SMTP +client request if the client certificate passes trust chain verification. +Useful with private-label CAs that only issue certificates to trusted +clients (and not otherwise).

+ +
check_ccert_access type:table

Use the remote +SMTP client certificate fingerprint or public key fingerprint +(Postfix 2.9 and later) as the lookup key for the specified access(5) +table.

+ +
+ +
+ +

The digest algorithm used to compute the client certificate +fingerprints is specified with the main.cf smtpd_tls_fingerprint_digest +parameter. The default is "md5", for compatibility with Postfix +versions < 2.5.

+ +

The permit_tls_all_clientcerts feature must be used with caution, +because it can result in too many access permissions. Use this +feature only if a special CA issues the client certificates, and +only if this CA is listed as trusted CA. If other CAs are trusted, +any owner of a valid client certificate would be authorized. +The permit_tls_all_clientcerts feature can be practical for a +specially created email relay server.

+ +

It is however recommended to stay with the permit_tls_clientcerts +feature and list all certificates via $relay_clientcerts, as +permit_tls_all_clientcerts does not permit any control when a +certificate must no longer be used (e.g. an employee leaving).

+ +

Example:

+ +
+
+# With Postfix 2.10 and later, the mail relay policy is
+# preferably specified under smtpd_relay_restrictions.
+/etc/postfix/main.cf:
+    smtpd_relay_restrictions = 
+        permit_mynetworks
+        permit_tls_clientcerts 
+        reject_unauth_destination
+
+ +
+# Older configurations combine relay control and spam control under
+# smtpd_recipient_restrictions. To use this example with Postfix ≥
+# 2.10 specify "smtpd_relay_restrictions=".
+/etc/postfix/main.cf:
+    smtpd_recipient_restrictions = 
+        permit_mynetworks
+        permit_tls_clientcerts 
+        reject_unauth_destination
+        ...other rules...
+
+
+ +

Example: Postfix lookup tables are in the form of (key, value) +pairs. Since we only need the key, the value can be chosen freely, e.g. +the name of the user or host:

+ +
+
+/etc/postfix/main.cf:
+    relay_clientcerts = hash:/etc/postfix/relay_clientcerts
+
+/etc/postfix/relay_clientcerts:
+    D7:04:2F:A7:0B:8C:A5:21:FA:31:77:E1:41:8A:EE:80 lutzpc.at.home
+
+
+ +

To extract the public key fingerprint from an X.509 certificate, +you need to extract the public key from the certificate and compute +the appropriate digest of its DER (ASN.1) encoding. With OpenSSL +the "-pubkey" option of the "x509" command extracts the public +key always in "PEM" format. We pipe the result to another OpenSSL +command that converts the key to DER and then to the "dgst" command +to compute the fingerprint.

+ +

The actual command to transform the key to DER format depends +on the version of OpenSSL used. With OpenSSL 1.0.0 and later, the +"pkey" command supports all key types. With OpenSSL 0.9.8 and +earlier, the key type is always RSA (nobody uses DSA, and EC +keys are not fully supported by 0.9.8), so the "rsa" command is +used.

+
+
+# OpenSSL 1.0 with all certificates and SHA-1 fingerprints.
+$ openssl x509 -in cert.pem -noout -pubkey |
+    openssl pkey -pubin -outform DER |
+    openssl dgst -sha1 -c
+(stdin)= 64:3f:1f:f6:e5:1e:d4:2a:56:8b:fc:09:1a:61:98:b5:bc:7c:60:58
+
+# OpenSSL 0.9.8 with RSA certificates and MD5 fingerprints.
+$ openssl x509 -in cert.pem -noout -pubkey |
+    openssl rsa -pubin -outform DER |
+    openssl dgst -md5 -c
+(stdin)= f4:62:60:f6:12:8f:d5:8d:28:4d:13:a7:db:b2:ff:50
+
+
+

Note: Postfix 2.9.0–2.9.5 computed the public key +fingerprint incorrectly. To use public-key fingerprints, upgrade +to Postfix 2.9.6 or later.

+ +

Server-side cipher controls

+ +

The Postfix SMTP server supports 5 distinct cipher grades as +specified by the smtpd_tls_mandatory_ciphers configuration parameter, +which determines the minimum cipher grade with mandatory TLS +encryption. The default minimum cipher grade for mandatory TLS is +"medium" which is essentially 128-bit encryption or better. The +smtpd_tls_ciphers parameter (Postfix ≥ 2.6) controls the minimum +cipher grade used with opportunistic TLS. Here, the default minimum +cipher grade is "medium" for Postfix releases after the middle of +2015, "export" for older Postfix releases. With Postfix < 2.6, +the minimum opportunistic TLS cipher grade is always "export".

+ +

By default anonymous ciphers are enabled. They are automatically +disabled when remote SMTP client certificates are requested. If +clients are expected to always verify the Postfix SMTP +server certificate you may want to disable anonymous ciphers +by setting "smtpd_tls_mandatory_exclude_ciphers = aNULL" or +"smtpd_tls_exclude_ciphers = aNULL", as appropriate. One can't force +a remote SMTP client to check the server certificate, so excluding +anonymous ciphers is generally unnecessary.

+ +

With mandatory and opportunistic TLS encryption, the Postfix +SMTP server by default disables SSLv2 and SSLv3 with Postfix releases +after the middle of 2015; older releases only disable SSLv2 for +mandatory TLS. The mandatory TLS protocol list is specified via the +smtpd_tls_mandatory_protocols configuration parameter. The +smtpd_tls_protocols parameter (Postfix ≥ 2.6) +controls the SSL/TLS protocols used with opportunistic TLS.

+ +

Note that the OpenSSL library only supports protocol exclusion +(not inclusion). For this reason, Postfix can exclude only protocols +that are known at the time the Postfix software is written. If new +protocols are added to the OpenSSL library, they cannot be excluded +without corresponding changes to the Postfix source code.

+ +

For a server that is not a public Internet MX host, Postfix +supports configurations with no server +certificates that use only the anonymous ciphers. This is +enabled by explicitly setting "smtpd_tls_cert_file = none" +and not specifying an smtpd_tls_dcert_file or smtpd_tls_eccert_file. +Such configurations may not interoperate with some clients, and require +that TLSv1.3 be explicitly disabled. Therefore, they are not +recommended, it is better and simpler to just configure a suitable +certificate.

+ +

Example, MSA that requires TLSv1 or higher, not SSLv2 or SSLv3, +with high grade ciphers:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_cert_file = /etc/postfix/cert.pem
+    smtpd_tls_key_file = /etc/postfix/key.pem
+    smtpd_tls_mandatory_ciphers = high
+    smtpd_tls_mandatory_exclude_ciphers = aNULL, MD5
+    smtpd_tls_security_level = encrypt
+    # Preferred syntax with Postfix ≥ 2.5:
+    smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
+    # Legacy syntax:
+    smtpd_tls_mandatory_protocols = TLSv1
+
+
+ +

With Postfix ≥ 3.4, specify instead a single file that holds the +key followed by the corresponding certificate and any associated issuing +certificates, leaving the "smtpd_tls_cert_file" and "smtpd_tls_key_file" +and related DSA and ECDSA parameters empty.

+ +
+
+/etc/postfix/main.cf:
+    smtpd_tls_chain_files = /etc/postfix/rsachain.pem
+    smtpd_tls_cert_file =
+    smtpd_tls_key_file =
+    ...
+
+
+ +

If you want to take maximal advantage of ciphers that offer forward secrecy see +the Getting +started section of FORWARD_SECRECY_README. The +full document conveniently presents all information about Postfix +forward secrecy support in one place: what forward secrecy is, how +to tweak settings, and what you can expect to see when Postfix uses +ciphers with forward secrecy.

+ +

Postfix 2.8 and later, in combination with OpenSSL 0.9.7 and later +allows TLS servers to preempt the TLS client's cipher-suite preference list. +This is possible only with SSLv3 and later, as in SSLv2 the client +chooses the cipher-suite from a list supplied by the server.

+ +

By default, the OpenSSL server selects the client's most preferred +cipher-suite that the server supports. With SSLv3 and later, the server +may choose its own most preferred cipher-suite that is supported (offered) +by the client. Setting "tls_preempt_cipherlist = yes" enables server +cipher-suite preferences. The default OpenSSL behavior applies with +"tls_preempt_cipherlist = no".

+ +

While server cipher-suite selection may in some cases lead to +a more secure or performant cipher-suite choice, there is some risk +of interoperability issues. In the past, some SSL clients have +listed lower priority ciphers that they did not implement correctly. +If the server chooses a cipher that the client prefers less, it may +select a cipher whose client implementation is flawed. Most notably +Windows 2003 Microsoft Exchange servers have flawed implementations +of DES-CBC3-SHA, which OpenSSL considers stronger than RC4-SHA. +Enabling server cipher-suite selection may create interoperability +issues with Windows 2003 Microsoft Exchange clients.

+ +

Miscellaneous server controls

+ +

The smtpd_starttls_timeout parameter limits the time of Postfix +SMTP server write and read operations during TLS startup and shutdown +handshake procedures.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtpd_starttls_timeout = 300s
+
+
+ +

With Postfix 2.8 and later, the tls_disable_workarounds parameter +specifies a list or bit-mask of default-enabled OpenSSL bug +work-arounds to disable. This may be necessary if one of the +work-arounds enabled by default in OpenSSL proves to pose a security +risk, or introduces an unexpected interoperability issue. The list +of enabled bug work-arounds is OpenSSL-release-specific. See the +tls_disable_workarounds parameter documentation for the list of +supported values.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    tls_disable_workarounds = 0xFFFFFFFF
+    tls_disable_workarounds = CVE-2010-4180
+
+
+ +

With Postfix ≥ 2.11, the tls_ssl_options parameter specifies +a list or bit-mask of OpenSSL options to enable. Specify one or +more of the named options below, or a hexadecimal bitmask of options +found in the ssl.h file corresponding to the run-time OpenSSL +library. While it may be reasonable to turn off all bug workarounds +(see above), it is not a good idea to attempt to turn on all features. +See the tls_ssl_options parameter documentation for the list of +supported values.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    tls_ssl_options = no_ticket, no_compression
+
+
+ +

You should only enable features via the hexadecimal mask when +the need to control the feature is critical (to deal with a new +vulnerability or a serious interoperability problem). Postfix DOES +NOT promise backwards compatible behavior with respect to the mask +bits. A feature enabled via the mask in one release may be enabled +by other means in a later release, and the mask bit will then be +ignored. Therefore, use of the hexadecimal mask is only a temporary +measure until a new Postfix or OpenSSL release provides a better +solution.

+ +

SMTP Client specific settings

+ +

Topics covered in this section:

+ + + +

Configuring TLS in the SMTP/LMTP client +

+ +

Similar to the Postfix SMTP server, the Postfix SMTP/LMTP client +implements multiple TLS security levels. These levels are described +in more detail in the sections that follow.

+ +
+
none
+
No TLS.
+
may
+
Opportunistic TLS.
+
encrypt
+
Mandatory TLS encryption. +
dane
+
Opportunistic DANE TLS. +
dane-only
+
Mandatory DANE TLS. +
fingerprint
+
Certificate fingerprint verification. +
verify
+
Mandatory server certificate verification. +
secure
+
Secure-channel TLS. +
+ +

TLS support in the LMTP delivery agent

+ +

The smtp(8) and lmtp(8) delivery agents are implemented by a +single dual-purpose program. Specifically, all the TLS features +described below apply +equally to SMTP and LMTP, after replacing the "smtp_" prefix of the each +parameter name with "lmtp_". + +

The Postfix LMTP delivery agent can communicate with LMTP servers +listening +on UNIX-domain sockets. When server certificate verification is enabled +and the server is listening on a UNIX-domain socket, the $myhostname +parameter is used to set the TLS verification nexthop and +hostname.

+ +

NOTE: Opportunistic encryption of LMTP traffic over UNIX-domain +sockets or loopback TCP connections is futile. TLS is only useful +in this context when +it is mandatory, typically to allow at least one of the server or the +client to authenticate the other. The "null" cipher grade may be +appropriate in this context, when available on both client and server. +The "null" ciphers provide authentication without encryption.

+ +

No TLS encryption

+ +

At the "none" TLS security level, TLS encryption is +disabled. This is the default security level, and +can be configured explicitly by setting "smtp_tls_security_level = none". +For LMTP, use the corresponding "lmtp_" parameter.

+ +

Per-destination settings may override this default setting, in which case +TLS is used selectively, only with destinations explicitly configured +for TLS.

+ +

You can disable TLS for a subset of destinations, while leaving +it enabled for the rest. With the Postfix TLS policy table, specify the "none" +security level. + +

Opportunistic TLS

+ +

At the "may" TLS security level, TLS encryption is opportunistic. +The SMTP transaction is encrypted if the STARTTLS ESMTP feature +is supported by the server. Otherwise, messages are sent in the clear. +Opportunistic TLS can be configured by setting "smtp_tls_security_level = may". +For LMTP, use the corresponding "lmtp_" parameter.

+ +

The "smtp_tls_ciphers" and "smtp_tls_protocols" configuration +parameters (Postfix ≥ 2.6) provide control over the cipher grade +and protocols used with opportunistic TLS. With earlier Postfix +releases, opportunistic TLS always uses the cipher grade "export" +and enables all protocols.

+ +

With opportunistic TLS, mail delivery continues even if the +server certificate is untrusted or bears the wrong name. +When the TLS handshake fails for an opportunistic +TLS session, rather than give up on mail delivery, the Postfix SMTP +client retries the transaction +with TLS disabled. Trying an unencrypted connection makes +it possible to deliver mail to sites with non-interoperable server +TLS implementations.

+ +

Opportunistic encryption is never used for LMTP over UNIX-domain +sockets. The communications channel is already confidential without +TLS, so the only potential benefit of TLS is authentication. Do not +configure opportunistic TLS for LMTP deliveries over UNIX-domain sockets. +Only configure TLS for LMTP over UNIX-domain sockets at the +encrypt security level or higher. +Attempts to configure opportunistic encryption of LMTP sessions will +be ignored with a warning written to the mail logs.

+ +

You can enable opportunistic TLS just for selected destinations. With +the Postfix TLS policy table, +specify the "may" security level.

+ +

This is the most common security level for TLS protected SMTP +sessions, stronger security is not generally available and, if needed, +is typically only configured on a per-destination basis. See the section +on TLS limitations above.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_security_level = may
+
+
+ +

Mandatory TLS encryption

+ +

At the "encrypt" TLS security level, messages are sent only +over TLS encrypted sessions. The SMTP transaction is aborted unless +the STARTTLS ESMTP feature is supported by the remote SMTP server. +If no suitable +servers are found, the message will be deferred. +Mandatory TLS encryption can be configured by setting +"smtp_tls_security_level = encrypt". Even though TLS +encryption is always used, mail delivery continues even if the server +certificate is untrusted or bears the wrong name. +For LMTP, use the corresponding "lmtp_" parameter.

+ +

At this security level and higher, the smtp_tls_mandatory_protocols +and smtp_tls_mandatory_ciphers configuration parameters determine +the list of sufficiently secure SSL protocol versions and the minimum +cipher strength. If the protocol or cipher requirements are not +met, the mail transaction is aborted. The documentation for these +parameters includes useful interoperability and security guidelines. +

+ +

Despite the potential for eliminating passive eavesdropping attacks, +mandatory TLS encryption is not viable as a default security level for +mail delivery to the public Internet. Some MX hosts do not support TLS at +all, and some of those that do have broken implementations. On a host +that delivers mail to the Internet, you should not configure mandatory +TLS encryption as the default security level.

+ +

You can enable mandatory TLS encryption just for specific destinations. +With the Postfix TLS policy +table, specify the "encrypt" security level. +

+ +

Examples:

+ +

In the example below, traffic to example.com and its sub-domains +via the corresponding MX hosts always uses TLS. The SSLv2 protocol +will be disabled (the default setting of smtp_tls_mandatory_protocols +excludes SSLv2+3). Only high- or medium-strength (i.e. 128 bit or +better) ciphers will be used by default for all "encrypt" security +level sessions.

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
+
+/etc/postfix/tls_policy:
+    example.com       encrypt
+    .example.com      encrypt
+
+
+ +

In the next example, secure message submission is configured +via the MSA "[example.net]:587". TLS sessions are encrypted +without authentication, because this MSA does not possess an acceptable +certificate. This MSA is known to be capable of "TLSv1" and "high" grade +ciphers, so these are selected via the policy +table.

+ +

Note: the policy table lookup key is the verbatim next-hop +specification from the recipient domain, transport(5) table or relayhost +parameter, with any enclosing square brackets and optional port. Take +care to be consistent: the suffixes ":smtp" or ":25" or no port suffix +result in different policy table lookup keys, even though they are +functionally equivalent nexthop specifications. Use at most one of these +forms for all destinations. Below, the policy table has multiple keys, +just in case the transport table entries are not specified consistently.

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
+
+/etc/services:
+    submission      587/tcp         msa             # mail message submission
+
+/etc/postfix/tls_policy:
+    [example.net]:587 encrypt protocols=TLSv1 ciphers=high
+    [example.net]:msa encrypt protocols=TLSv1 ciphers=high
+    [example.net]:submission encrypt protocols=TLSv1 ciphers=high
+
+
+ +

DANE TLS authentication.

+ +

The Postfix SMTP client supports two TLS security levels based +on DANE TLSA (RFC 6698, RFC 7671, RFC 7672) records. The opportunistic +"dane" level and the mandatory "dane-only" level.

+ +

The "dane" level is a stronger form of opportunistic TLS that is resistant to +man in the middle and downgrade attacks when the destination domain +uses DNSSEC to publish DANE TLSA records for its MX hosts. If a +remote SMTP server has "usable" (see section 3 of RFC 7672) DANE +TLSA records, the server connection will be authenticated. When +DANE authentication fails, there is no fallback to unauthenticated +or plaintext delivery.

+ +

If TLSA records are published for a given remote SMTP server +(implying TLS support), but are all "unusable" due to unsupported +parameters or malformed data, the Postfix SMTP client will use mandatory unauthenticated TLS. +Otherwise, when no TLSA records are published, the Postfix SMTP +client behavior is the same as with may.

+ +

TLSA records must be published in DNSSEC validated DNS zones. +Any TLSA records in DNS zones not protected via DNSSEC are ignored. +The Postfix SMTP client will not look for TLSA records associated +with MX hosts whose "A" or "AAAA" records lie in an "insecure" DNS +zone. Such lookups have been observed to cause interoperability +issues with poorly implemented DNS servers, and are in any case not +expected to ever yield "secure" results, since that would require +a very unlikely DLV DNS trust anchor configured between the host +record and the associated "_25._tcp" child TLSA record.

+ +

The "dane-only" level is a form of secure-channel TLS based on the DANE PKI. +If "usable" TLSA records are present these are used to authenticate the +remote SMTP server. Otherwise, or when server certificate verification +fails, delivery via the server in question tempfails.

+ +

At both security levels, the TLS policy for the destination is +obtained via TLSA records validated with DNSSEC. For TLSA policy +to be in effect, the destination domain's containing DNS zone must +be signed and the Postfix SMTP client's operating system must be +configured to send its DNS queries to a recursive DNS nameserver +that is able to validate the signed records. Each MX host's DNS +zone needs to also be signed, and needs to publish DANE TLSA (see +section 3 of RFC 7672) records that specify how that MX host's TLS +certificate is to be verified.

+ +

TLSA records do not preempt the normal SMTP MX host +selection algorithm, if some MX hosts support TLSA and others do +not, TLS security will vary from delivery to delivery. It is up +to the domain owner to configure their MX hosts and their DNS +sensibly. To configure the Postfix SMTP client for DNSSEC lookups +see the documentation for the smtp_dns_support_level main.cf +parameter. The tls_dane_digests parameter controls the list of +supported digests.

+ +

As explained in section 3 of RFC 7672, certificate usages "0" +and "1", which are intended to "constrain" existing Web-PKI trust, +are not supported with MTA-to-MTA SMTP. Rather, TLSA records with +usages "0" and "1" are treated as "unusable".

+ +

The Postfix SMTP client supports only certificate usages "2" +and "3". Experimental support for silently mapping certificate +usage "1" to "3" has been withdrawn starting with Postfix 3.2.

+ +

When usable TLSA records are obtained for the remote SMTP server +the Postfix SMTP client sends the SNI TLS extension in its SSL +client hello message. This may help the remote SMTP server live +up to its promise to provide a certificate that matches its TLSA +records.

+ +

For purposes of protocol and cipher selection, the "dane" +security level is treated like a "mandatory" TLS security level, +and weak ciphers and protocols are disabled. Since DANE authenticates +server certificates the "aNULL" cipher-suites are transparently +excluded at this level, no need to configure this manually. RFC +7672 (DANE) TLS authentication is available with Postfix 2.11 and +later.

+ +

When a DANE TLSA record specifies a trust-anchor (TA) certificate +(that is an issuing CA), the strategy used to verify the peername +of the server certificate is unconditionally "nexthop, hostname". +Both the nexthop domain and the hostname obtained from the +DNSSEC-validated MX lookup are safe from forgery and the server +certificate must contain at least one of these names.

+ +

When a DANE TLSA record specifies an end-entity (EE) certificate, +(that is the actual server certificate), as with the fingerprint +security level below, no name checks or certificate expiration checks +are applied. The server certificate (or its public key) either matches +the DANE record or not. Server administrators should publish such +EE records in preference to all other types.

+ +

The pre-requisites for DANE support in the Postfix SMTP client are:

+ +

The above client pre-requisites do not apply to the Postfix SMTP server. +It will support DANE provided it supports TLSv1 and its TLSA records are +published in a DNSSEC signed zone. To receive DANE secured mail for multiple +domains, use the same hostname to add the server to each domain's MX +records. There are no plans to implement SNI in the Postfix SMTP server.

+ +

Note: The Postfix SMTP client's internal stub DNS resolver is +DNSSEC-aware, but it does not itself validate DNSSEC records, rather +it delegates DNSSEC validation to the operating system's configured +recursive DNS nameserver. The Postfix DNS client relies on a secure +channel to the resolver's cache for DNSSEC integrity, but does not +support TSIG to protect the transmission channel between itself and +the nameserver. Therefore, it is strongly recommended (DANE security +guarantee void otherwise) that each MTA run a local DNSSEC-validating +recursive resolver ("unbound" from nlnetlabs.nl is a reasonable +choice) listening on the loopback interface, and that the system +be configured to use only this local nameserver. The local +nameserver may forward queries to an upstream recursive resolver +on another host if desired.

+ +

Note: When the operating system's recursive nameserver is not +local, enabling EDNS0 expanded DNS packet sizes and turning on the +DNSSEC "DO" bit in the DNS request and/or the new DNSSEC-specific +records returned in the nameserver's replies may cause problems +with older or buggy firewall and DNS server implementations. +Therefore, Postfix does not enable DNSSEC by default. Since MX +lookups happen before the security level is determined, DANE support +is disabled for all destinations unless you set "smtp_dns_support_level += dnssec". To enable DNSSEC lookups selectively, define a new +dedicated transport with a "-o smtp_dns_support_level=dnssec" +override in master.cf and route selected domains to that transport. +If DNSSEC proves to be sufficiently reliable for these domains, you +can enable it for all destinations by changing the global +smtp_dns_support_level in main.cf.

+ +

Example: "dane" security for selected destinations, with +opportunistic TLS by default. This is the recommended configuration +for early adopters.

+

+ +
+
+main.cf:
+    indexed = ${default_database_type}:${config_directory}/
+    #
+    # default: Opportunistic TLS with no DNSSEC lookups.
+    #
+    smtp_tls_security_level = may
+    smtp_dns_support_level = enabled
+    #
+    # Per-destination TLS policy
+    #
+    smtp_tls_policy_maps = ${indexed}tls_policy
+    #
+    # default_transport = smtp, but some destinations are special:
+    #
+    transport_maps = ${indexed}transport
+
+
+ +
+
+transport:
+    example.com dane
+    example.org dane
+
+
+ +
+
+tls_policy:
+    example.com dane-only
+
+
+ +
+
+master.cf:
+    dane       unix  -       -       n       -       -       smtp
+      -o smtp_dns_support_level=dnssec
+      -o smtp_tls_security_level=dane
+
+
+ +

Certificate fingerprint verification

+ +

At the fingerprint security level, no trusted Certification +Authorities are used or required. The certificate trust chain, +expiration date, etc., are not checked. Instead, the +smtp_tls_fingerprint_cert_match parameter or the "match" attribute +in the policy table lists the +remote SMTP server certificate fingerprint or public key fingerprint. +Certificate fingerprint verification is available with Postfix 2.5 +and later, public-key fingerprint support is available with Postfix +2.9 and later.

+ +

If certificate fingerprints are exchanged securely, this is the +strongest, and least scalable security level. The administrator needs +to securely collect the fingerprints of the X.509 certificates of each +peer server, store them into a local file, and update this local file +whenever the peer server's public certificate changes. If public key +fingerprints are used in place of fingerprints of the entire certificate, +the fingerprints remain valid even after the certificate is renewed, +provided that the same public/private keys are used to obtain +the new certificate.

+ +

Fingerprint verification may be feasible for an SMTP "VPN" connecting +a small number of branch offices over the Internet, or for secure +connections to a central mail hub. It works poorly if the remote SMTP +server is managed by a third party, and its public certificate changes +periodically without prior coordination with the verifying site.

+ +

The digest algorithm used to calculate the fingerprint is +selected by the smtp_tls_fingerprint_digest parameter. In the policy table multiple fingerprints can be +combined with a "|" delimiter in a single match attribute, or multiple +match attributes can be employed. The ":" character is not used as a +delimiter as it occurs between each pair of fingerprint (hexadecimal) +digits.

+ +

Example: fingerprint TLS security with an internal mailhub. +Two matching fingerprints are listed. The relayhost may be multiple +physical hosts behind a load-balancer, each with its own private/public +key and self-signed certificate. Alternatively, a single relayhost may +be in the process of switching from one set of private/public keys to +another, and both keys are trusted just prior to the transition.

+ +
+
+    relayhost = [mailhub.example.com]
+    smtp_tls_security_level = fingerprint
+    smtp_tls_fingerprint_digest = md5
+    smtp_tls_fingerprint_cert_match =
+        3D:95:34:51:24:66:33:B9:D2:40:99:C0:C1:17:0B:D1
+        EC:3B:2D:B0:5B:B1:FB:6D:20:A3:9D:72:F6:8D:12:35
+
+
+ +

Example: Certificate fingerprint verification with selected destinations. +As in the example above, we show two matching fingerprints:

+
+
+/etc/postfix/main.cf:
+    smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
+    smtp_tls_fingerprint_digest = md5
+
+
+
+
+/etc/postfix/tls_policy:
+    example.com	fingerprint
+        match=3D:95:34:51:24:66:33:B9:D2:40:99:C0:C1:17:0B:D1
+        match=EC:3B:2D:B0:5B:B1:FB:6D:20:A3:9D:72:F6:8D:12:35
+
+
+ +

To extract the public key fingerprint from an X.509 certificate, +you need to extract the public key from the certificate and compute +the appropriate digest of its DER (ASN.1) encoding. With OpenSSL +the "-pubkey" option of the "x509" command extracts the public +key always in "PEM" format. We pipe the result to another OpenSSL +command that converts the key to DER and then to the "dgst" command +to compute the fingerprint.

+ +

The actual command to transform the key to DER format depends +on the version of OpenSSL used. With OpenSSL 1.0.0 and later, the +"pkey" command supports all key types. With OpenSSL 0.9.8 and +earlier, the key type is always RSA (nobody uses DSA, and EC +keys are not fully supported by 0.9.8), so the "rsa" command is +used.

+
+
+# OpenSSL 1.0 with all certificates and SHA-1 fingerprints.
+$ openssl x509 -in cert.pem -noout -pubkey |
+    openssl pkey -pubin -outform DER |
+    openssl dgst -sha1 -c
+(stdin)= 64:3f:1f:f6:e5:1e:d4:2a:56:8b:fc:09:1a:61:98:b5:bc:7c:60:58
+
+# OpenSSL 0.9.8 with RSA certificates and MD5 fingerprints.
+$ openssl x509 -in cert.pem -noout -pubkey |
+    openssl rsa -pubin -outform DER |
+    openssl dgst -md5 -c
+(stdin)= f4:62:60:f6:12:8f:d5:8d:28:4d:13:a7:db:b2:ff:50
+
+
+

Note: Postfix 2.9.0–2.9.5 computed the public key +fingerprint incorrectly. To use public-key fingerprints, upgrade +to Postfix 2.9.6 or later.

+ +

Mandatory server certificate verification

+ +

At the verify TLS security level, messages are sent only over +TLS encrypted sessions if the remote SMTP server certificate is +valid (not +expired or revoked, and signed by a trusted Certification Authority) +and where the server certificate name matches a known pattern. +Mandatory +server certificate verification can be configured by setting +"smtp_tls_security_level = verify". The +smtp_tls_verify_cert_match parameter can override the default +"hostname" certificate name matching strategy. Fine-tuning the +matching strategy is generally only appropriate for secure-channel destinations. +For LMTP use the corresponding "lmtp_" parameters.

+ +

If the server certificate chain is trusted (see smtp_tls_CAfile +and smtp_tls_CApath), any DNS names in the SubjectAlternativeName +certificate extension are used to verify the remote SMTP server name. +If no +DNS names are specified, the certificate CommonName is checked. +If you want mandatory encryption without server certificate +verification, see above.

+ +

With Postfix ≥ 2.11 the "smtp_tls_trust_anchor_file" parameter +or more typically the corresponding per-destination "tafile" attribute +optionally modifies trust chain verification. If the parameter is +not empty the root CAs in CAfile and CApath are no longer trusted. +Rather, the Postfix SMTP client will only trust certificate-chains +signed by one of the trust-anchors contained in the chosen files. +The specified trust-anchor certificates and public keys are not +subject to expiration, and need not be (self-signed) root CAs. They +may, if desired, be intermediate certificates. Therefore, these +certificates also may be found "in the middle" of the trust chain +presented by the remote SMTP server, and any untrusted issuing +parent certificates will be ignored.

+ +

Despite the potential for eliminating "man-in-the-middle" and other +attacks, mandatory certificate trust chain and subject name verification +is not viable as a default Internet mail delivery policy. Some MX hosts +do not support TLS at all, and a significant portion of TLS-enabled +MTAs use self-signed certificates, or certificates that are signed by +a private Certification Authority. On a machine that delivers mail to +the Internet, you should not configure mandatory server certificate +verification as a default policy.

+ +

Mandatory server certificate verification as a default security +level may be appropriate if you know that you will only connect to +servers that support RFC 2487 and that present verifiable +server certificates. An example would be a client that sends all +email to a central mailhub that offers the necessary STARTTLS +support. In such cases, you can often use a secure-channel configuration instead. +

+ +

You can enable mandatory server certificate verification just +for specific destinations. With the Postfix TLS policy table, specify the "verify" +security level.

+ +

Example:

+ +

In this example, the Postfix SMTP client encrypts all traffic to the +example.com domain. The peer hostname is verified, but +verification is vulnerable to DNS response forgery. Mail transmission +to example.com recipients uses "high" grade ciphers.

+ +
+
+/etc/postfix/main.cf:
+    indexed = ${default_database_type}:${config_directory}/
+    smtp_tls_CAfile = ${config_directory}/CAfile.pem
+    smtp_tls_policy_maps = ${indexed}tls_policy
+
+/etc/postfix/tls_policy:
+    example.com       verify ciphers=high
+
+
+ +

Secure server certificate verification

+ +

At the secure TLS security level, messages are sent only over +secure-channel TLS sessions where DNS forgery resistant server +certificate verification succeeds. If no suitable servers are found, the +message will be deferred. Postfix secure-channels +can be configured by setting "smtp_tls_security_level = secure". +The smtp_tls_secure_cert_match parameter can override the default +"nexthop, dot-nexthop" certificate match strategy. +For LMTP, use the corresponding "lmtp_" parameters.

+ +

If the server certificate chain is trusted (see smtp_tls_CAfile and +smtp_tls_CApath), any DNS names in the SubjectAlternativeName certificate +extension are used to verify the remote SMTP server name. If no DNS names +are +specified, the CommonName is checked. If you want mandatory encryption +without server certificate verification, see above.

+ +

With Postfix ≥ 2.11 the "smtp_tls_trust_anchor_file" parameter +or more typically the corresponding per-destination "tafile" attribute +optionally modifies trust chain verification. If the parameter is +not empty the root CAs in CAfile and CApath are no longer trusted. +Rather, the Postfix SMTP client will only trust certificate-chains +signed by one of the trust-anchors contained in the chosen files. +The specified trust-anchor certificates and public keys are not +subject to expiration, and need not be (self-signed) root CAs. They +may, if desired, be intermediate certificates. Therefore, these +certificates also may be found "in the middle" of the trust chain +presented by the remote SMTP server, and any untrusted issuing +parent certificates will be ignored.

+ +

Despite the potential for eliminating "man-in-the-middle" and other +attacks, mandatory secure server certificate verification is not +viable as a default Internet mail delivery policy. Some MX hosts +do not support TLS at all, and a significant portion of TLS-enabled +MTAs use self-signed certificates, or certificates that are signed +by a private Certification Authority. On a machine that delivers mail +to the Internet, you should not configure secure TLS verification +as a default policy.

+ +

Mandatory secure server certificate verification as a default +security level may be appropriate if you know that you will only +connect to servers that support RFC 2487 and that present +verifiable server certificates. An example would be a client that +sends all email to a central mailhub that offers the necessary +STARTTLS support.

+ +

You can enable secure TLS verification just for specific destinations. +With the Postfix TLS policy table, +specify the "secure" security level.

+ +

Examples:

+ + + +

Client-side TLS activity logging

+ +

To get additional information about Postfix SMTP client TLS +activity you can increase the loglevel from 0..4. Each logging +level also includes the information that is logged at a lower +logging level.

+ +
+ + + + + + + + + + + + + + + + +
Level Postfix 2.9 and later Earlier +releases.
0 Disable +logging of TLS activity.
1 Log only a summary +message on TLS handshake completion — no logging of remote SMTP +server certificate trust-chain verification errors if server certificate +verification is not required. Log the summary +message and unconditionally log trust-chain verification errors. +
2 Also +log levels during TLS negotiation.
3 Also +log hexadecimal and ASCII dump of TLS negotiation process.
4 Also +log hexadecimal and ASCII dump of complete transmission after +STARTTLS.
+ +
+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_loglevel = 0
+
+
+ +

Client-side certificate and private +key configuration

+ +

Do not configure Postfix SMTP client certificates unless you must +present +client TLS certificates to one or more servers. Client certificates are +not usually needed, and can cause problems in configurations that work +well without them. The recommended setting is to let the defaults stand:

+ +
+
+    smtp_tls_cert_file =
+    smtp_tls_dcert_file =
+    smtp_tls_key_file =
+    smtp_tls_dkey_file =
+    # Postfix ≥ 2.6
+    smtp_tls_eccert_file =
+    smtp_tls_eckey_file =
+    # Postfix ≥ 3.4
+    smtp_tls_chain_files =
+
+
+ +

The best way to use the default settings is to comment out the above +parameters in main.cf if present.

+ +

During TLS startup negotiation the Postfix SMTP client may present a +certificate to the remote SMTP server. Browsers typically let the user +select among the certificates that match the CA names indicated by the +remote SMTP server. The Postfix SMTP client does not yet have a mechanism +to select from multiple candidate certificates on the fly, and supports a +single set of certificates (at most one per public key algorithm).

+ +

RSA, DSA and ECDSA (Postfix ≥ 2.6) certificates are supported. +You can configure all three at the same time, in which case the +cipher used determines which certificate is presented.

+ +

It is possible for the Postfix SMTP client to use the same +key/certificate pair as the Postfix SMTP server. If a certificate +is to be presented, it must be in "PEM" format. The private key +must not be encrypted, meaning: it must be accessible without +password. Both parts (certificate and private key) may be in the +same file.

+ +

With OpenSSL 1.1.1 and Postfix ≥ 3.4 it is also possible to +configure Ed25519 and Ed448 certificates. Rather than add two more +pairs of key and certificate parameters, Postfix 3.4 introduces a new +"smtp_tls_chain_files" parameter which specifies all the configured +certificates at once, and handles files that hold both the key and the +associated certificates in one pass, thereby avoiding potential race +conditions during key rollover.

+ +

To enable remote SMTP servers to verify the Postfix SMTP client +certificate, the issuing CA certificates must be made available to the +server. You should include the required certificates in the client +certificate file, the client certificate first, then the issuing +CA(s) (bottom-up order).

+ +

Example: the certificate for "client.example.com" was issued by +"intermediate CA" which itself has a certificate issued by "root CA". +As the "root" super-user create the client.pem file with:

+ +
+
+# umask 077
+# cat client_key.pem client_cert.pem intermediate_CA.pem > chain.pem 
+
+
+ +

A Postfix SMTP client certificate supplied here must be usable +as SSL client certificate and hence pass the "openssl verify -purpose +sslclient ..." test.

+ +

A server that trusts the root CA has a local copy of the root +CA certificate, so it is not necessary to include the root CA +certificate here. Leaving it out of the "chain.pem" file reduces +the overhead of the TLS exchange.

+ +

If you want the Postfix SMTP client to accept remote SMTP server +certificates issued by these CAs, append the root certificate to +$smtp_tls_CAfile or install it in the $smtp_tls_CApath directory.

+ +

Example: Postfix ≥ 3.4 all-in-one chain file(s). One or more +chain files that start with a key that is immediately followed by the +corresponding certificate and any additional issuer certificates. A +single file can hold multiple (key, cert, [chain]) sequences, one +per algorithm. It is typically simpler to keep the chain for each +algorithm in its own file. Most users are likely to deploy at most a +single RSA chain, but with OpenSSL 1.1.1, it is possible to deploy up +five chains, one each for RSA, ECDSA, ED25519, ED448 and even the +obsolete DSA.

+ +
+
+    # Postfix ≥ 3.4.  Preferred configuration interface.  Each file
+    # starts with the private key, followed by the corresponding
+    # certificate, and any intermediate issuer certificates.
+    #
+    smtp_tls_chain_files =
+        /etc/postfix/rsa.pem,
+        /etc/postfix/ecdsa.pem,
+        /etc/postfix/ed25519.pem,
+        /etc/postfix/ed448.pem
+
+
+ +

You can also store the keys separately from their certificates, again +provided each is listed before the corresponding certificate chain. Storing a +key and its associated certificate chain in separate files is not recommended, +because this is prone to race conditions during key rollover, as there is no +way to update multiple files atomically.

+ +
+
+    # Postfix ≥ 3.4.
+    # Storing keys separately from the associated certificates is not
+    # recommended.
+    smtp_tls_chain_files =
+        /etc/postfix/rsakey.pem,
+        /etc/postfix/rsacerts.pem,
+        /etc/postfix/ecdsakey.pem,
+        /etc/postfix/ecdsacerts.pem
+
+
+ +

The below examples show the legacy algorithm-specific configurations +for Postfix 3.3 and older. With Postfix ≤ 3.3, even if the key is +stored in the same file as the certificate, the file is read twice and a +(brief) race condition still exists during key rollover. While Postfix +≥ 3.4 avoids the race when the key and certificate are in the same +file, you should use the new "smtp_tls_chain_files" interface shown +above.

+ +

RSA key and certificate examples:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_cert_file = /etc/postfix/client.pem
+    smtp_tls_key_file = $smtp_tls_cert_file
+
+
+ +

Their DSA counterparts:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_dcert_file = /etc/postfix/client-dsa.pem
+    smtp_tls_dkey_file = $smtp_tls_dcert_file
+
+
+ +

Their ECDSA counterparts (Postfix ≥ 2.6 + OpenSSL ≥ 1.0.0):

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_eccert_file = /etc/postfix/client-ecdsa.pem
+    smtp_tls_eckey_file = $smtp_tls_eccert_file
+
+
+ +

To verify a remote SMTP server certificate, the Postfix SMTP +client needs to trust the certificates of the issuing Certification +Authorities. These certificates in "pem" format can be stored in a +single $smtp_tls_CAfile or in multiple files, one CA per file in +the $smtp_tls_CApath directory. If you use a directory, don't forget +to create the necessary "hash" links with:

+ +
+
+# $OPENSSL_HOME/bin/c_rehash /path/to/directory 
+
+
+ +

The $smtp_tls_CAfile contains the CA certificates of one or more +trusted CAs. The file is opened (with root privileges) before Postfix +enters the optional chroot jail and so need not be accessible from inside the +chroot jail.

+ +

Additional trusted CAs can be specified via the $smtp_tls_CApath +directory, in which case the certificates are read (with $mail_owner +privileges) from the files in the directory when the information +is needed. Thus, the $smtp_tls_CApath directory needs to be accessible +inside the optional chroot jail.

+ +

The choice between $smtp_tls_CAfile and $smtp_tls_CApath is +a space/time tradeoff. If there are many trusted CAs, the cost of +preloading them all into memory may not pay off in reduced access time +when the certificate is needed.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_CAfile = /etc/postfix/CAcert.pem
+    smtp_tls_CApath = /etc/postfix/certs
+
+
+ +

Client-side TLS connection reuse

+ +

Historically, the Postfix SMTP client has supported multiple +deliveries per plaintext connection. Postfix 3.4 introduces support +for multiple deliveries per TLS-encrypted connection. Multiple +deliveries per connection improve mail delivery performance, +especially for destinations that throttle clients that don't combine +deliveries.

+ +

To enable multiple deliveries per TLS connection, specify:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_connection_reuse = yes
+
+
+ +

Alternatively, specify the attribute "connection_reuse=yes" in +an smtp_tls_policy_maps entry.

+ +

The implementation of TLS connection reuse relies on the same +scache(8) service as used for delivering plaintext SMTP mail, the +same tlsproxy(8) daemon as used by the postscreen(8) service, and +relies on the same hints from the qmgr(8) daemon. + +See "Postfix Connection +Cache" for a description of the underlying connection reuse +infrastructure.

+ +

Initial SMTP handshake:

+
    smtp(8) -> remote SMTP server
+ +

Reused SMTP/TLS connection, or new SMTP/TLS connection:

+
    smtp(8) -> tlsproxy(8) -> remote SMTP server
+ +

Cached SMTP/TLS connection:

+
    scache(8) -> tlsproxy(8) -> remote SMTP server
+ +

As of Postfix 3.4, TLS connection reuse is disabled by default. +This may change once the impact on over-all performance is understood. +

+ +

Client-side TLS session cache

+ +

The remote SMTP server and the Postfix SMTP client negotiate a +session, which takes some computer time and network bandwidth. By +default, this session information is cached only in the smtp(8) +process actually using this session and is lost when the process +terminates. To share the session information between multiple +smtp(8) processes, a persistent session cache can be used. You +can specify any database type that can store objects of several +kbytes and that supports the sequence operator. DBM databases are +not suitable because they can only store small objects. The cache +is maintained by the tlsmgr(8) process, so there is no problem with +concurrent access. Session caching is highly recommended, because +the cost of repeatedly negotiating TLS session keys is high. Future +Postfix SMTP servers may limit the number of sessions that a client +is allowed to negotiate per unit time.

+ + +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_session_cache_database = btree:/var/lib/postfix/smtp_scache
+
+
+ +

Note: as of version 2.5, Postfix no longer uses root privileges +when opening this file. The file should now be stored under the +Postfix-owned data_directory. As a migration aid, an attempt to +open the file under a non-Postfix directory is redirected to the +Postfix-owned data_directory, and a warning is logged.

+ +

Cached Postfix SMTP client session information expires after +a certain amount of time. Postfix/TLS does not use the OpenSSL +default of 300s, but a longer time of 3600s (=1 hour). RFC 2246 +recommends a maximum of 24 hours.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_session_cache_timeout = 3600s
+
+
+ +

As of Postfix 2.11 this setting cannot exceed 100 days. If set +≤ 0, session caching is disabled. If set to a positive value +less than 2 minutes, the minimum value of 2 minutes is used instead.

+ +

Client TLS limitations +

+ +

The security properties of TLS communication channels are +application specific. While the TLS protocol can provide a confidential, +tamper-resistant, mutually authenticated channel between client +and server, not all of these security features are applicable to every +communication.

+ +

For example, while mutual TLS authentication between browsers and web +servers is possible, it is not practical, or even useful, for web-servers +that serve the public to verify the identity of every potential user. In +practice, most HTTPS transactions are asymmetric: the browser verifies +the HTTPS server's identity, but the user remains anonymous. Much of +the security policy is up to the client. If the client chooses to not +verify the server's name, the server is not aware of this. There are many +interesting browser security topics, but we shall not dwell +on them here. Rather, our goal is to understand the security features +of TLS in conjunction with SMTP.

+ +

An important SMTP-specific observation is that a public MX host is +even more at the mercy of the SMTP client than is an HTTPS server. Not only +can it not enforce due care in the client's use of TLS, but it cannot even +enforce the use of TLS, because TLS support in SMTP clients is still the +exception rather than the rule. One cannot, in practice, limit access to +one's MX hosts to just TLS-enabled clients. Such a policy would result +in a vast reduction in one's ability to communicate by email with the +world at large.

+ +

One may be tempted to try enforcing TLS for mail from specific +sending organizations, but this, too, runs into obstacles. One such +obstacle is that we don't know who is (allegedly) sending mail until +we see the "MAIL FROM:" SMTP command, and at that point, if TLS +is not already in use, a potentially sensitive sender address (and +with SMTP PIPELINING one or more of the recipients) has (have) already been +leaked in the clear. Another obstacle is that mail from the sender to +the recipient may be forwarded, and the forwarding organization may not +have any security arrangements with the final destination. Bounces also +need to be protected. These can only be identified by the IP address and +HELO name of the connecting client, and it is difficult to keep track +of all the potential IP addresses or HELO names of the outbound email +servers of the sending organization.

+ +

Consequently, TLS security for mail delivery to public MX hosts is +almost entirely the client's responsibility. The server is largely a +passive enabler of TLS security, the rest is up to the client. While the +server has a greater opportunity to mandate client security policy when +it is a dedicated MSA that only handles outbound mail from trusted clients, +below we focus on the client security policy.

+ +

On the SMTP client, there are further complications. When +delivering mail to a given domain, in contrast to HTTPS, one rarely +uses the domain name directly as the target host of the SMTP session. +More typically, one uses MX lookups — these are usually +unauthenticated — to obtain the domain's SMTP server hostname(s). +When, as is current practice, the client verifies the insecurely +obtained MX hostname, it is subject to a DNS man-in-the-middle +attack.

+ +

Adoption of DNSSEC and RFC6698 (DANE) may gradually (as domains +implement DNSSEC and publish TLSA records for their MX hosts) address +the DNS man-in-the-middle risk and provide scalable key management +for SMTP with TLS. Postfix ≥ 2.11 supports the new dane and dane-only +security levels that take advantage of these standards.

+ +

If clients instead attempted to verify the recipient domain name, +an SMTP server for multiple domains would need to +list all its email domain names in its certificate, and generate a +new certificate each time a new domain were added. At least some CAs set +fairly low limits (20 for one prominent CA) on the number of names that +server certificates can contain. This approach is not consistent with +current practice and does not scale.

+ +

It is regrettably the case that TLS secure-channels +(fully authenticated and immune to man-in-the-middle attacks) impose +constraints on the sending and receiving sites that preclude ubiquitous +deployment. One needs to manually configure this type of security for +each destination domain, and in many cases implement non-default TLS +policy table entries for additional +domains hosted at a common secured destination. For these reasons +secure-channel configurations +will never be the norm. For the generic domain with which you +have made no specific security arrangements, this security level is not +a good fit.

+ +

Given that strong authentication is not generally possible, and that +verifiable certificates cost time and money, many servers that implement +TLS use self-signed certificates or private CAs. This further limits +the applicability of verified TLS on the public Internet.

+ +

Historical note: while the documentation of these issues and many of the +related features were new with Postfix 2.3, the issue was well +understood before Postfix 1.0, when Lutz Jänicke was designing +the first unofficial Postfix TLS patch. See his original post http://www.imc.org/ietf-apps-tls/mail-archive/msg00304.html +and the first response http://www.imc.org/ietf-apps-tls/mail-archive/msg00305.html. +The problem is not even unique to SMTP or even TLS, similar issues exist +for secure connections via aliases for HTTPS and Kerberos. SMTP merely +uses indirect naming (via MX records) more frequently.

+ +

TLS policy table +

+ +

A small fraction of servers offer STARTTLS but the negotiation +consistently fails. As long as encryption is not mandatory, the +Postfix SMTP client retries the delivery immediately with TLS +disabled, without any need to explicitly disable TLS for the problem +destinations.

+ +

The policy table is specified via the smtp_tls_policy_maps +parameter. This lists optional lookup tables with the Postfix SMTP client +TLS security policy by next-hop destination.

+ +

The TLS policy table is indexed by the full next-hop destination, +which is either the recipient domain, or the verbatim next-hop +specified in the transport table, $local_transport, $virtual_transport, +$relay_transport or $default_transport. This includes any enclosing +square brackets and any non-default destination server port suffix. The +LMTP socket type prefix (inet: or unix:) +is not included in the lookup key.

+ +

Only the next-hop domain, or $myhostname with LMTP over UNIX-domain +sockets, is used as the nexthop name for certificate verification. The +port and any enclosing square brackets are used in the table lookup key, +but are not used for server name verification.

+ +

When the lookup key is a domain name without enclosing square brackets +or any :port suffix (typically the recipient domain), and the full +domain is not found in the table, just as with the transport(5) table, +the parent domain starting with a leading "." is matched recursively. This +allows one to specify a security policy for a recipient domain and all +its sub-domains.

+ +

The lookup result is a security level, followed by an optional +list of whitespace and/or comma separated name=value attributes +that override related main.cf settings. The TLS security levels are described above. Below, we +describe the corresponding table syntax:

+ +
+ +
none
No TLS. No +additional attributes are supported at this level.
+ +
may
Opportunistic TLS. +The optional "ciphers", "exclude" and "protocols" attributes +(available for opportunistic TLS with Postfix ≥ 2.6) override the +"smtp_tls_ciphers", "smtp_tls_exclude_ciphers" and "smtp_tls_protocols" +configuration parameters. At this level and higher, the optional +"servername" attribute (available with Postfix ≥ 3.4) overrides the +global "smtp_tls_servername" parameter, enabling per-destination +configuration of the SNI extension sent to the remote SMTP server.
+ +
encrypt
Mandatory encryption. +Mail is delivered only if the remote SMTP server offers STARTTLS +and the TLS handshake succeeds. At this level and higher, the optional +"protocols" attribute overrides the main.cf smtp_tls_mandatory_protocols +parameter, the optional "ciphers" attribute overrides the +main.cf smtp_tls_mandatory_ciphers parameter, and the optional +"exclude" attribute (Postfix ≥ 2.6) overrides the main.cf +smtp_tls_mandatory_exclude_ciphers parameter.
+ +
dane
Opportunistic DANE TLS. +The TLS policy for the destination is obtained via TLSA records in +DNSSEC. If no TLSA records are found, the effective security level +used is may. If TLSA records are +found, but none are usable, the effective security level is encrypt. When usable TLSA records +are obtained for the remote SMTP server, SSLv2+3 are automatically +disabled (see smtp_tls_mandatory_protocols), and the server certificate +must match the TLSA records. RFC 7672 (DANE) TLS authentication +and DNSSEC support is available with Postfix 2.11 and later.
+ +
dane-only
Mandatory DANE TLS. +The TLS policy for the destination is obtained via TLSA records in +DNSSEC. If no TLSA records are found, or none are usable, no +connection is made to the server. When usable TLSA records are +obtained for the remote SMTP server, SSLv2+3 are automatically disabled +(see smtp_tls_mandatory_protocols), and the server certificate must +match the TLSA records. RFC 7672 (DANE) TLS authentication and +DNSSEC support is available with Postfix 2.11 and later.
+ +
fingerprint
Certificate +fingerprint verification. Available with Postfix 2.5 and +later. At this security level, there are no trusted Certification +Authorities. The certificate trust chain, expiration date, ... are +not checked. Instead, the optional match attribute, or else +the main.cf smtp_tls_fingerprint_cert_match parameter, lists +the server certificate fingerprints or public key fingerprints +(Postfix 2.9 and later). The +digest algorithm used to calculate fingerprints is selected by the +smtp_tls_fingerprint_digest parameter. Multiple fingerprints can +be combined with a "|" delimiter in a single match attribute, or multiple +match attributes can be employed. The ":" character is not used as a +delimiter as it occurs between each pair of fingerprint (hexadecimal) +digits.
+ +
verify
Mandatory +server certificate verification. Mail is delivered only if the +TLS handshake succeeds, if the remote SMTP server certificate can +be validated (not expired or revoked, and signed by a trusted +Certification Authority), and if the server certificate name matches +the optional "match" attribute (or the main.cf smtp_tls_verify_cert_match +parameter value when no optional "match" attribute is specified). +With Postfix ≥ 2.11 the "tafile" attribute optionally modifies +trust chain verification in the same manner as the +"smtp_tls_trust_anchor_file" parameter. The "tafile" attribute +may be specified multiple times to load multiple trust-anchor +files.
+ +
secure
Secure certificate +verification. Mail is delivered only if the TLS handshake succeeds, +if the remote SMTP server certificate can be validated (not expired +or revoked, and signed by a trusted Certification Authority), and if the +server certificate name matches the optional "match" attribute (or the +main.cf smtp_tls_secure_cert_match parameter value when no optional +"match" attribute is specified). With Postfix ≥ 2.11 the "tafile" +attribute optionally modifies trust chain verification in the same manner +as the "smtp_tls_trust_anchor_file" parameter. The "tafile" attribute +may be specified multiple times to load multiple trust-anchor +files.
+ +
+ +

Notes:

+ + + +

+Example: +

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
+    # Postfix 2.5 and later
+    smtp_tls_fingerprint_digest = md5
+/etc/postfix/tls_policy:
+    example.edu             none
+    example.mil             may
+    example.gov             encrypt ciphers=high
+    example.com             verify match=hostname:dot-nexthop ciphers=high
+    example.net             secure
+    .example.net            secure match=.example.net:example.net
+    [mail.example.org]:587  secure match=nexthop
+    # Postfix 2.5 and later
+    [thumb.example.org]         fingerprint
+    	match=EC:3B:2D:B0:5B:B1:FB:6D:20:A3:9D:72:F6:8D:12:35
+	match=3D:95:34:51:24:66:33:B9:D2:40:99:C0:C1:17:0B:D1
+    # Postfix 2.6 and later
+    example.info            may protocols=!SSLv2 ciphers=medium exclude=3DES
+
+
+ +

Note: The "hostname" strategy if listed in a non-default setting +of smtp_tls_secure_cert_match or in the "match" attribute in the policy +table can render the "secure" level vulnerable to DNS forgery. Do not use +the "hostname" strategy for secure-channel +configurations in environments where DNS security is not assured.

+ +

Discovering servers that support +TLS

+ +

As we decide on a "per site" basis whether or not to use TLS, +it would be good to have a list of sites that offered "STARTTLS". +We can collect it ourselves with this option.

+ +

If the smtp_tls_note_starttls_offer feature is enabled and a +server offers STARTTLS while TLS is not already enabled for that +server, the Postfix SMTP client logs a line as follows:

+ +
+
+postfix/smtp[pid]: Host offered STARTTLS: [hostname.example.com]
+
+
+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_note_starttls_offer = yes
+
+
+ +

Server certificate verification depth

+ +

The server certificate verification depth is specified with the +main.cf smtp_tls_scert_verifydepth parameter. The default verification +depth is 9 (the OpenSSL default), for compatibility with Postfix +versions before 2.5 where smtp_tls_scert_verifydepth was ignored. +When you configure trust +in a root CA, it is not necessary to explicitly trust intermediary CAs +signed by the root CA, unless $smtp_tls_scert_verifydepth is less than the +number of CAs in the certificate chain for the servers of interest. With +a verify depth of 1 you can only verify certificates directly signed +by a trusted CA, and all trusted intermediary CAs need to be configured +explicitly. With a verify depth of 2 you can verify servers signed by a +root CA or a direct intermediary CA (so long as the server is correctly +configured to supply its intermediate CA certificate).

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_scert_verifydepth = 2
+
+
+ +

Client-side cipher controls

+ +

The Postfix SMTP client supports 5 distinct cipher grades +as specified by the smtp_tls_mandatory_ciphers configuration +parameter. This setting controls the minimum acceptable SMTP client +TLS cipher grade for use with mandatory TLS encryption. The default +value "medium" is suitable for most destinations with which you may +want to enforce TLS, and is beyond the reach of today's cryptanalytic +methods. See smtp_tls_policy_maps for information on how to configure +ciphers on a per-destination basis.

+ +

By default anonymous ciphers are allowed, and automatically +disabled when remote SMTP server certificates are verified. If you +want to +disable anonymous ciphers even at the "encrypt" security level, set +"smtp_tls_mandatory_exclude_ciphers = aNULL"; and to +disable anonymous ciphers even with opportunistic TLS, set +"smtp_tls_exclude_ciphers = aNULL". There is generally +no need to take these measures. Anonymous ciphers save bandwidth +and TLS session cache space, if certificates are ignored, there is +little point in requesting them.

+ +

The "smtp_tls_ciphers" configuration parameter (Postfix ≥ 2.6) +provides control over the minimum cipher grade for opportunistic TLS. +The default minimum cipher grade for opportunistic TLS is "medium" +for Postfix releases after the middle of 2015, and "export" for +older releases. With Postfix < 2.6, the minimum opportunistic +TLS cipher grade is always "export".

+ +

With mandatory and opportunistic TLS encryption, the Postfix +SMTP client will by default disable SSLv2 and SSLv3. The mandatory +TLS protocol list is specified via the +smtp_tls_mandatory_protocols configuration parameter. The corresponding +smtp_tls_protocols parameter (Postfix ≥ 2.6) controls +the SSL/TLS protocols used with opportunistic TLS.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_tls_mandatory_ciphers = medium
+    smtp_tls_mandatory_exclude_ciphers = RC4, MD5
+    smtp_tls_exclude_ciphers = aNULL
+    # Preferred form with Postfix ≥ 2.5:
+    smtp_tls_mandatory_protocols = !SSLv2
+    # Legacy form for Postfix < 2.5:
+    smtp_tls_mandatory_protocols = SSLv3, TLSv1
+    # Also available with Postfix ≥ 2.6:
+    smtp_tls_ciphers = medium
+    smtp_tls_protocols = !SSLv2
+
+
+ +

Client-side SMTPS support

+ +

These sections show how to send mail to a server that does not +support STARTTLS, but that provides the deprecated SMTPS service +on TCP port 465. Depending on the Postfix version, some additional +tooling may be required.

+ +

Postfix ≥ 3.0

+ +

The Postfix SMTP client has SMTPS support built-in as of version +3.0. Use one of the following examples, to send all remote mail, +or to send only some remote mail, to an SMTPS server.

+ +
Postfix ≥ 3.0: Sending all remote mail to an SMTPS server
+ +

The first example will send all remote mail over SMTPS through +a provider's server called "mail.example.com":

+ +
+
+/etc/postfix/main.cf:
+    # Client-side SMTPS requires "encrypt" or stronger.
+    smtp_tls_security_level = encrypt
+    smtp_tls_wrappermode = yes
+    # The [] suppress MX lookups.
+    relayhost = [mail.example.com]:465
+
+
+ +

Use "postfix reload" to make the change effective.

+ +

See SOHO_README for additional information about SASL authentication. +

+ +
Postfix ≥ 3.0: Sending only mail for a specific destination +via SMTPS
+ +

The second example will send only mail for "example.com" via +SMTPS. This time, Postfix uses a transport map to deliver only +mail for "example.com" via SMTPS:

+ +
+
+/etc/postfix/main.cf:
+    transport_maps = hash:/etc/postfix/transport
+
+/etc/postfix/transport:
+    example.com  relay-smtps:example.com:465
+
+/etc/postfix/master.cf:
+    relay-smtps  unix  -       -       n       -       -       smtp
+	# Client-side SMTPS requires "encrypt" or stronger.
+	-o smtp_tls_security_level=encrypt
+	-o smtp_tls_wrappermode=yes
+
+
+ +

Use "postmap hash:/etc/postfix/transport" and "postfix reload" +to make the change effective.

+ +

See SOHO_README for additional information about SASL +authentication.

+ +

Postfix < 3.0

+ +

Although older Postfix SMTP client versions do not support TLS +wrapper mode, it is relatively easy to forward a connection through +the stunnel program if Postfix needs to deliver mail to some legacy +system that doesn't support STARTTLS.

+ +
Postfix < 3.0: Sending all remote mail to an SMTPS server
+ +

The first example uses SMTPS to send all remote mail to a +provider's mail server called "mail.example.com".

+ +

A minimal stunnel.conf file is sufficient to set up a tunnel +from local port 11125 to the remote destination "mail.example.com" +and port "smtps". Postfix will later use this tunnel to connect to +the remote server.

+ +
+
+/path/to/stunnel.conf:
+    [smtp-tls-wrapper]
+    accept = 11125
+    client = yes
+    connect = mail.example.com:smtps
+
+
+ +

To test this tunnel, use:

+ +
+
+$ telnet localhost 11125
+
+
+ +

This should produce the greeting from the remote SMTP server +at mail.example.com.

+ +

On the Postfix side, the relayhost feature sends all remote +mail through the local stunnel listener on port 11125:

+ +
+
+/etc/postfix/main.cf:
+    relayhost = [127.0.0.1]:11125
+
+
+ +

Use "postfix reload" to make the change effective.

+ +

See SOHO_README for additional information about SASL +authentication.

+ +

Postfix < 3.0: Sending only mail for a specific destination via SMTPS

+ +

The second example will use SMTPS to send only mail for +"example.com" via SMTPS. It uses the same stunnel configuration +file as the first example, so it won't be repeated here.

+ +

This time, the Postfix side uses a transport map to direct only +mail for "example.com" through the tunnel:

+ +
+
+/etc/postfix/main.cf:
+    transport_maps = hash:/etc/postfix/transport
+
+/etc/postfix/transport:
+    example.com  relay:[127.0.0.1]:11125
+
+
+ +

Use "postmap hash:/etc/postfix/transport" and "postfix reload" +to make the change effective.

+ +

See SOHO_README for additional information about SASL authentication. +

+ +

Miscellaneous client controls

+ +

The smtp_starttls_timeout parameter limits the time of Postfix +SMTP client write and read operations during TLS startup and shutdown +handshake procedures. In case of problems the Postfix SMTP client +tries the next network address on the mail exchanger list, and +defers delivery if no alternative server is available.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    smtp_starttls_timeout = 300s
+
+
+ +

With Postfix 2.8 and later, the tls_disable_workarounds parameter +specifies a list or bit-mask of OpenSSL bug work-arounds to disable. This +may be necessary if one of the work-arounds enabled by default in +OpenSSL proves to pose a security risk, or introduces an unexpected +interoperability issue. Some bug work-arounds known to be problematic +are disabled in the default value of the parameter when linked with +an OpenSSL library that could be vulnerable.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    tls_disable_workarounds = 0xFFFFFFFF
+    tls_disable_workarounds = CVE-2010-4180, LEGACY_SERVER_CONNECT
+
+
+ +

Note: Disabling LEGACY_SERVER_CONNECT is not wise at this +time, lots of servers are still unpatched and Postfix is not +significantly vulnerable to the renegotiation issue in the TLS +protocol.

+ +

With Postfix ≥ 2.11, the tls_ssl_options parameter specifies +a list or bit-mask of OpenSSL options to enable. Specify one or +more of the named options below, or a hexadecimal bitmask of options +found in the ssl.h file corresponding to the run-time OpenSSL +library. While it may be reasonable to turn off all bug workarounds +(see above), it is not a good idea to attempt to turn on all features. +

+ +

A future version of OpenSSL may by default no longer allow +connections to servers that don't support secure renegotiation. +Since the exposure for SMTP is minimal, and some SMTP servers may +remain unpatched, you can add LEGACY_SERVER_CONNECT to the +options to restore the more permissive default of current OpenSSL +releases.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    tls_ssl_options = NO_TICKET, NO_COMPRESSION, LEGACY_SERVER_CONNECT
+
+
+ +

You should only enable features via the hexadecimal mask when +the need to control the feature is critical (to deal with a new +vulnerability or a serious interoperability problem). Postfix DOES +NOT promise backwards compatible behavior with respect to the mask +bits. A feature enabled via the mask in one release may be enabled +by other means in a later release, and the mask bit will then be +ignored. Therefore, use of the hexadecimal mask is only a temporary +measure until a new Postfix or OpenSSL release provides a better +solution.

+ +

TLS manager specific settings

+ +

The security of cryptographic software such as TLS depends +critically on the ability to generate unpredictable numbers for +keys and other information. To this end, the tlsmgr(8) process +maintains a Pseudo Random Number Generator (PRNG) pool. This is +queried by the smtp(8) and smtpd(8) processes when they initialize. +By default, these daemons request 32 bytes, the equivalent to 256 +bits. This is more than sufficient to generate a 128bit (or 168bit) +session key.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    tls_daemon_random_bytes = 32
+
+
+ +

In order to feed its in-memory PRNG pool, the tlsmgr(8) reads +entropy from an external source, both at startup and during run-time. +Specify a good entropy source, like EGD or /dev/urandom; be sure +to only use non-blocking sources (on OpenBSD, use /dev/arandom +when tlsmgr(8) complains about /dev/urandom timeout errors). +If the entropy source is not a +regular file, you must prepend the source type to the source name: +"dev:" for a device special file, or "egd:" for a source with EGD +compatible socket interface.

+ +

Examples (specify only one in main.cf):

+ +
+
+/etc/postfix/main.cf:
+    tls_random_source = dev:/dev/urandom
+    tls_random_source = egd:/var/run/egd-pool
+
+
+ +

By default, tlsmgr(8) reads 32 bytes from the external entropy +source at each seeding event. This amount (256bits) is more than +sufficient for generating a 128bit symmetric key. With EGD and +device entropy sources, the tlsmgr(8) limits the amount of data +read at each step to 255 bytes. If you specify a regular file as +entropy source, a larger amount of data can be read.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    tls_random_bytes = 32
+
+
+ +

In order to update its in-memory PRNG pool, the tlsmgr(8) +queries the external entropy source again after a pseudo-random +amount of time. The time is calculated using the PRNG, and is +between 0 and the maximal time specified with tls_random_reseed_period. +The default maximal time interval is 1 hour.

+ +

Example:

+ +
+
+/etc/postfix/main.cf:
+    tls_random_reseed_period = 3600s
+
+
+ +

The tlsmgr(8) process saves the PRNG state to a persistent +exchange file at regular times and when the process terminates, so +that it can recover the PRNG state the next time it starts up. +This file is created when it does not exist.

+ +

Examples:

+ +
+
+/etc/postfix/main.cf:
+    tls_random_exchange_name = /var/lib/postfix/prng_exch
+    tls_random_prng_update_period = 3600s
+
+
+ +

As of version 2.5, Postfix no longer uses root privileges when +opening this file. The file should now be stored under the Postfix-owned +data_directory. As a migration aid, an attempt to open the file +under a non-Postfix directory is redirected to the Postfix-owned +data_directory, and a warning is logged. If you wish to continue +using a pre-existing PRNG state file, move it to the data_directory +and change the ownership to the account specified with the mail_owner +parameter.

+ +

With earlier Postfix versions the default file location +is under the Postfix configuration directory, which is not the +proper place for information that is modified by Postfix.

+ +

Getting started, quick and dirty

+ +

The following steps will get you started quickly. Because you +sign your own Postfix public key certificate, you get TLS encryption +but no TLS authentication. This is sufficient for testing, and +for exchanging email with sites that you have no trust relationship +with. For real authentication you need also enable DNSSEC record +signing for your domain and publish TLSA records and/or your Postfix +public key certificate needs to be signed by a recognized Certification +Authority. To authenticate the certificates of remote host you +need a DNSSEC-validating local resolver and to enable DANE authentication and/or configure +the Postfix SMTP client with a list of public key certificates of +Certification Authorities, but make sure to read about the limitations of the latter approach. +

+ +

In the examples below, user input is shown in bold +font, and a "#" prompt indicates a super-user shell.

+ + + +

Quick-start TLS with Postfix ≥ 3.1

+ +

Postfix 3.1 provides built-in support for enabling TLS in the +SMTP client and server and for ongoing certificate and DANE TLSA +record management. + +

+ +

Quick-start TLS in the Postfix ≥ 3.1 SMTP client.

+ +

If you are using Postfix 3.1 or later, and your SMTP client TLS +settings are in their default state, you can enable opportunistic TLS in the SMTP client as +follows:

+ +
+
+# postfix tls enable-client
+# postfix reload
+
+
+ +

If some of the Postfix SMTP client TLS settings are not in their +default state, this will not make any changes, but will instead +suggest the minimal required settings for SMTP client TLS. The +"postfix reload" command is optional, it is only needed if you want +the settings to take effect right away. Note, this does not enable +trust in any public certification authorities, and does not configure +client TLS certificates as these are largely pointless with opportunistic TLS.

+ +

There is not yet a turn-key command for enabling DANE authentication. This is because +DANE requires changes to your resolv.conf file and a +corresponding DNSSEC-validating resolver local to the Postfix host, +these changes are difficult to automate in a portable way.

+ +

If you're willing to revert your settings to the defaults and +switch to a "stock" opportunistic TLS configuration, then you can: +erase all the SMTP client TLS settings and then enable client TLS:

+ +
+
+# postconf -X `postconf -nH | egrep '^smtp(_|_enforce_|_use_)tls'`
+# postfix tls enable-client
+# postfix reload
+
+
+ +

Quick-start TLS in the Postfix ≥ 3.1 SMTP server.

+ +

If you are using Postfix 3.1 or later, and your SMTP server TLS +settings are in their default state, you can enable +opportunistic TLS in the SMTP server as follows:

+ +
+
+# postfix tls enable-server
+# postfix reload
+
+
+ +

If some of the Postfix SMTP client TLS settings are not in their +default state, this will not make any changes, but will instead +suggest the minimal required settings for SMTP client TLS. The +"postfix reload" command is optional, it is only needed if you want +the settings to take effect right away. This will generate a +self-signed private key and certificate and enable TLS in the Postfix +SMTP server.

+ +

If you're willing to revert your settings to the defaults and +switch to a "stock" server TLS configuration, then you can: erase +all the SMTP server TLS settings and then enable server TLS:

+ +
+
+# postconf -X `postconf -nH | egrep '^smtpd(_|_enforce_|_use_)tls'`
+# postfix tls enable-server
+# postfix reload
+
+
+ +

Postfix ≥ 3.1 provides additional built-in support for ongoing +management of TLS in the SMTP server, via additional "postfix tls" +sub-commands. These make it easy to generate certificate signing +requests, create and deploy new keys and certificates, and generate +DANE TLSA records. See the postfix-tls(1) documentation for details. +

+ +

Self-signed server certificate

+ +

The following commands (credits: Viktor Dukhovni) generate and +install a 2048-bit RSA private key and 10-year self-signed certificate +for the local Postfix system. This requires super-user privileges. +(By using date-specific filenames for the certificate and key files, +and updating main.cf with new filenames, a potential race condition +in which the key and certificate might not match is avoided). +

+ +
+
+# dir="$(postconf -h config_directory)"
+# fqdn=$(postconf -h myhostname)
+# case $fqdn in /*) fqdn=$(cat "$fqdn");; esac
+# ymd=$(date +%Y-%m-%d)
+# key="${dir}/key-${ymd}.pem"; rm -f "${key}"
+# cert="${dir}/cert-${ymd}.pem"; rm -f "${cert}"
+# (umask 077; openssl genrsa -out "${key}" 2048) &&
+  openssl req -new -key "${key}" \
+    -x509 -subj "/CN=${fqdn}" -days 3650 -out "${cert}" &&
+  postconf -e \
+    "smtpd_tls_cert_file = ${cert}" \
+    "smtpd_tls_key_file = ${key}" \
+    'smtpd_tls_security_level = may' \
+    'smtpd_tls_received_header = yes' \
+    'smtpd_tls_loglevel = 1' \
+    'smtp_tls_security_level = may' \
+    'smtp_tls_loglevel = 1' \
+    'smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache' \
+    'tls_random_source = dev:/dev/urandom'
+
+
+ +

Note: the last command requires both single (') and double (") +quotes.

+ +

The postconf(1) command above enables opportunistic TLS for +receiving and sending mail. It also enables logging of TLS connections +and recording of TLS use in the "Received" header. TLS session +caching is also enabled in the Postfix SMTP client. With Postfix +≥ 2.10, the SMTP server does not need an explicit session cache +since session reuse is better handled via RFC 5077 TLS session +tickets.

+ +

Private Certification Authority

+ + + + +

Building Postfix with TLS support

+ +

These instructions assume that you build Postfix from source +code as described in the INSTALL document. Some modification may +be required if you build Postfix from a vendor-specific source +package.

+ +

To build Postfix with TLS support, first we need to generate +the make(1) files with the necessary definitions. This is +done by invoking the command "make makefiles" in the Postfix +top-level directory and with arguments as shown next.

+ +

NOTE: Do not use Gnu TLS. It will spontaneously terminate +a Postfix daemon process with exit status code 2, instead of allowing +Postfix to 1) report the error to the maillog file, and to 2) provide +plaintext service where this is appropriate.

+ + + +

If you need to apply other customizations (such as Berkeley DB +databases, MySQL, PostgreSQL, LDAP or SASL), see the respective +Postfix README documents, and combine their "make makefiles" +instructions with the instructions above:

+ +
+
+% make tidy # if you have left-over files from a previous build
+% make makefiles CCARGS="-DUSE_TLS \
+    (other -D or -I options)" \
+    AUXLIBS="-lssl -lcrypto \
+    (other -l options for libraries in /usr/lib) \
+    (-L/path/name + -l options for other libraries)"
+
+
+ +

To complete the build process, see the Postfix INSTALL +instructions. Postfix has TLS support turned off by default, so +you can start using Postfix as soon as it is installed.

+ +

Reporting problems

+ +

Problems are preferably reported via <postfix-users@postfix.org>. +See http://www.postfix.org/lists.html for subscription information. +When reporting a problem, please be thorough in the report. Patches, +when possible, are greatly appreciated too.

+ +

Credits

+ + + + + + -- cgit v1.2.3