Adding debian version 2.4.56-1~deb11u2.debian/2.4.56-1_deb11u2debian

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 134 insertions, 0 deletions

diff --git a/debian/config-dir/sites-available/default-ssl.conf b/debian/config-dir/sites-available/default-ssl.conf
new file mode 100644
index 0000000..7e37a9c
--- /dev/null
+++ b/debian/config-dir/sites-available/default-ssl.conf
@@ -0,0 +1,134 @@
+<IfModule mod_ssl.c>
+	<VirtualHost _default_:443>
+		ServerAdmin webmaster@localhost
+
+		DocumentRoot /var/www/html
+
+		# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
+		# error, crit, alert, emerg.
+		# It is also possible to configure the loglevel for particular
+		# modules, e.g.
+		#LogLevel info ssl:warn
+
+		ErrorLog ${APACHE_LOG_DIR}/error.log
+		CustomLog ${APACHE_LOG_DIR}/access.log combined
+
+		# For most configuration files from conf-available/, which are
+		# enabled or disabled at a global level, it is possible to
+		# include a line for only one particular virtual host. For example the
+		# following line enables the CGI configuration for this host only
+		# after it has been globally disabled with "a2disconf".
+		#Include conf-available/serve-cgi-bin.conf
+
+		#   SSL Engine Switch:
+		#   Enable/Disable SSL for this virtual host.
+		SSLEngine on
+
+		#   A self-signed (snakeoil) certificate can be created by installing
+		#   the ssl-cert package. See
+		#   /usr/share/doc/apache2/README.Debian.gz for more info.
+		#   If both key and certificate are stored in the same file, only the
+		#   SSLCertificateFile directive is needed.
+		SSLCertificateFile	/etc/ssl/certs/ssl-cert-snakeoil.pem
+		SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key
+
+		#   Server Certificate Chain:
+		#   Point SSLCertificateChainFile at a file containing the
+		#   concatenation of PEM encoded CA certificates which form the
+		#   certificate chain for the server certificate. Alternatively
+		#   the referenced file can be the same as SSLCertificateFile
+		#   when the CA certificates are directly appended to the server
+		#   certificate for convinience.
+		#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt
+
+		#   Certificate Authority (CA):
+		#   Set the CA certificate verification path where to find CA
+		#   certificates for client authentication or alternatively one
+		#   huge file containing all of them (file must be PEM encoded)
+		#   Note: Inside SSLCACertificatePath you need hash symlinks
+		#		 to point to the certificate files. Use the provided
+		#		 Makefile to update the hash symlinks after changes.
+		#SSLCACertificatePath /etc/ssl/certs/
+		#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
+
+		#   Certificate Revocation Lists (CRL):
+		#   Set the CA revocation path where to find CA CRLs for client
+		#   authentication or alternatively one huge file containing all
+		#   of them (file must be PEM encoded)
+		#   Note: Inside SSLCARevocationPath you need hash symlinks
+		#		 to point to the certificate files. Use the provided
+		#		 Makefile to update the hash symlinks after changes.
+		#SSLCARevocationPath /etc/apache2/ssl.crl/
+		#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
+
+		#   Client Authentication (Type):
+		#   Client certificate verification type and depth.  Types are
+		#   none, optional, require and optional_no_ca.  Depth is a
+		#   number which specifies how deeply to verify the certificate
+		#   issuer chain before deciding the certificate is not valid.
+		#SSLVerifyClient require
+		#SSLVerifyDepth  10
+
+		#   SSL Engine Options:
+		#   Set various options for the SSL engine.
+		#   o FakeBasicAuth:
+		#	 Translate the client X.509 into a Basic Authorisation.  This means that
+		#	 the standard Auth/DBMAuth methods can be used for access control.  The
+		#	 user name is the `one line' version of the client's X.509 certificate.
+		#	 Note that no password is obtained from the user. Every entry in the user
+		#	 file needs this password: `xxj31ZMTZzkVA'.
+		#   o ExportCertData:
+		#	 This exports two additional environment variables: SSL_CLIENT_CERT and
+		#	 SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+		#	 server (always existing) and the client (only existing when client
+		#	 authentication is used). This can be used to import the certificates
+		#	 into CGI scripts.
+		#   o StdEnvVars:
+		#	 This exports the standard SSL/TLS related `SSL_*' environment variables.
+		#	 Per default this exportation is switched off for performance reasons,
+		#	 because the extraction step is an expensive operation and is usually
+		#	 useless for serving static content. So one usually enables the
+		#	 exportation for CGI and SSI requests only.
+		#   o OptRenegotiate:
+		#	 This enables optimized SSL connection renegotiation handling when SSL
+		#	 directives are used in per-directory context.
+		#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+		<FilesMatch "\.(cgi|shtml|phtml|php)$">
+				SSLOptions +StdEnvVars
+		</FilesMatch>
+		<Directory /usr/lib/cgi-bin>
+				SSLOptions +StdEnvVars
+		</Directory>
+
+		#   SSL Protocol Adjustments:
+		#   The safe and default but still SSL/TLS standard compliant shutdown
+		#   approach is that mod_ssl sends the close notify alert but doesn't wait for
+		#   the close notify alert from client. When you need a different shutdown
+		#   approach you can use one of the following variables:
+		#   o ssl-unclean-shutdown:
+		#	 This forces an unclean shutdown when the connection is closed, i.e. no
+		#	 SSL close notify alert is send or allowed to received.  This violates
+		#	 the SSL/TLS standard but is needed for some brain-dead browsers. Use
+		#	 this when you receive I/O errors because of the standard approach where
+		#	 mod_ssl sends the close notify alert.
+		#   o ssl-accurate-shutdown:
+		#	 This forces an accurate shutdown when the connection is closed, i.e. a
+		#	 SSL close notify alert is send and mod_ssl waits for the close notify
+		#	 alert of the client. This is 100% SSL/TLS standard compliant, but in
+		#	 practice often causes hanging connections with brain-dead browsers. Use
+		#	 this only for browsers where you know that their SSL implementation
+		#	 works correctly.
+		#   Notice: Most problems of broken clients are also related to the HTTP
+		#   keep-alive facility, so you usually additionally want to disable
+		#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
+		#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
+		#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+		#   "force-response-1.0" for this.
+		# BrowserMatch "MSIE [2-6]" \
+		#		nokeepalive ssl-unclean-shutdown \
+		#		downgrade-1.0 force-response-1.0
+
+	</VirtualHost>
+</IfModule>
+
+# vim: syntax=apache ts=4 sw=4 sts=4 sr noet