diff options
Diffstat (limited to '')
-rwxr-xr-x | bin/tests/system/serve-stale/tests.sh | 2621 |
1 files changed, 2621 insertions, 0 deletions
diff --git a/bin/tests/system/serve-stale/tests.sh b/bin/tests/system/serve-stale/tests.sh new file mode 100755 index 0000000..d4a52e6 --- /dev/null +++ b/bin/tests/system/serve-stale/tests.sh @@ -0,0 +1,2621 @@ +#!/bin/sh + +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. + +SYSTEMTESTTOP=.. +. $SYSTEMTESTTOP/conf.sh + +RNDCCMD="$RNDC -c ../common/rndc.conf -p ${CONTROLPORT} -s" +DIG="$DIG +time=11" + +max_stale_ttl=$(sed -ne 's,^[[:space:]]*max-stale-ttl \([[:digit:]]*\).*,\1,p' $TOP_SRCDIR/bin/named/config.c) +stale_answer_ttl=$(sed -ne 's,^[[:space:]]*stale-answer-ttl \([[:digit:]]*\).*,\1,p' $TOP_SRCDIR/bin/named/config.c) + +status=0 +n=0 + +# +# First test server with serve-stale options set. +# +echo_i "test server with serve-stale options set" + +n=$((n+1)) +echo_i "prime cache longttl.example TXT ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 longttl.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache data.example TXT ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache othertype.example CAA ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 othertype.example CAA > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nodata.example TXT ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nxdomain.example TXT ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 nxdomain.example TXT > dig.out.test$n +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify prime cache statistics ($n)" +ret=0 +rm -f ns1/named.stats +$RNDCCMD 10.53.0.1 stats > /dev/null 2>&1 +[ -f ns1/named.stats ] || ret=1 +cp ns1/named.stats ns1/named.stats.$n +# Check first 10 lines of Cache DB statistics. After prime queries, we expect +# two active TXT, one active Others, one nxrrset TXT, and one NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns1/named.stats.$n > ns1/named.stats.$n.cachedb || ret=1 +grep "1 Others" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "2 TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 !TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 NXDOMAIN" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (stale-answer-ttl=4 max-stale-ttl=3600 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +sleep 2 + +# Run rndc dumpdb, test whether the stale data has correct comment printed. +# The max-stale-ttl is 3600 seconds, so the comment should say the data is +# stale for somewhere between 3500-3599 seconds. +echo_i "check rndc dump stale data.example ($n)" +rndc_dumpdb ns1 || ret=1 +awk '/; stale/ { x=$0; getline; print x, $0}' ns1/named_dump.db.test$n | + grep "; stale data\.example.*3[56]...*TXT.*A text record with a 2 second ttl" > /dev/null 2>&1 || ret=1 +# Also make sure the not expired data does not have a stale comment. +awk '/; answer/ { x=$0; getline; print x, $0}' ns1/named_dump.db.test$n | + grep "; answer longttl\.example.*[56]...*TXT.*A text record with a 600 second ttl" > /dev/null 2>&1 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.1 longttl.example TXT > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.1 othertype.example CAA > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$((n+4)) & +$DIG -p ${PORT} @10.53.0.1 nxdomain.example TXT > dig.out.test$((n+5)) + +wait + +n=$((n+1)) +echo_i "check stale data.example TXT ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*4.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check non-stale longttl.example TXT ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "longttl\.example\..*59[0-9].*IN.*TXT.*A text record with a 600 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale othertype.example CAA ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "othertype\.example\..*4.*IN.*CAA.*0.*issue" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nodata.example TXT ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*4.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nxdomain.example TXT ($n)" +ret=0 +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*4.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify stale cache statistics ($n)" +ret=0 +rm -f ns1/named.stats +$RNDCCMD 10.53.0.1 stats > /dev/null 2>&1 +[ -f ns1/named.stats ] || ret=1 +cp ns1/named.stats ns1/named.stats.$n +# Check first 10 lines of Cache DB statistics. After serve-stale queries, we +# expect one active TXT RRset, one stale TXT, one stale nxrrset TXT, and one +# stale NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns1/named.stats.$n > ns1/named.stats.$n.cachedb || ret=1 +grep "1 TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #Others" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #!TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #NXDOMAIN" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +# Test stale-refresh-time when serve-stale is enabled via configuration. +# Steps for testing stale-refresh-time option (default). +# 1. Prime cache data.example txt +# 2. Disable responses from authoritative server. +# 3. Sleep for TTL duration so rrset TTL expires (2 sec) +# 4. Query data.example +# 5. Check if response come from stale rrset (4 sec TTL) +# 6. Enable responses from authoritative server. +# 7. Query data.example +# 8. Check if response come from stale rrset, since the query +# is within stale-refresh-time window. +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (stale-answer-ttl=4 max-stale-ttl=3600 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 1-3 done above. + +# Step 4. +n=$((n+1)) +echo_i "sending query for test ($n)" +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$n + +# Step 5. +echo_i "check stale data.example TXT (stale-refresh-time) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*4.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 6. +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 7. +echo_i "sending query for test $((n+1))" +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) + +# Step 8. +n=$((n+1)) +echo_i "check stale data.example TXT comes from cache (stale-refresh-time) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*4.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# +# Test disabling serve-stale via rndc. +# +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc serve-stale off' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale off || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: off (rndc) (stale-answer-ttl=4 max-stale-ttl=3600 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.1 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.1 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +n=$((n+1)) +echo_i "check stale data.example TXT (serve-stale off) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale othertype.example CAA (serve-stale off) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nodata.example TXT (serve-stale off) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nxdomain.example TXT (serve-stale off) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# +# Test enabling serve-stale via rndc. +# +n=$((n+1)) +echo_i "running 'rndc serve-stale on' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale on || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (rndc) (stale-answer-ttl=4 max-stale-ttl=3600 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.1 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.1 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +n=$((n+1)) +echo_i "check stale data.example TXT (serve-stale on) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*4.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale othertype.example CAA (serve-stale on) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "othertype\.example\..*4.*IN.*CAA.*0.*issue" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nodata.example TXT (serve-stale on) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*4.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nxdomain.example TXT (serve-stale on) ($n)" +ret=0 +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*4.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc serve-stale off' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale off || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc serve-stale reset' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale reset || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (stale-answer-ttl=4 max-stale-ttl=3600 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.1 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.1 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +n=$((n+1)) +echo_i "check stale data.example TXT (serve-stale reset) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*4.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale othertype.example CAA (serve-stale reset) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "othertype.example\..*4.*IN.*CAA.*0.*issue" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nodata.example TXT (serve-stale reset) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*4.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nxdomain.example TXT (serve-stale reset) ($n)" +ret=0 +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*4.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc serve-stale off' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale off || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: off (rndc) (stale-answer-ttl=4 max-stale-ttl=3600 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# +# Update named.conf. +# Test server with low max-stale-ttl. +# +echo_i "test server with serve-stale options set, low max-stale-ttl" + +n=$((n+1)) +echo_i "updating ns1/named.conf ($n)" +ret=0 +copy_setports ns1/named2.conf.in ns1/named.conf +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc reload' ($n)" +ret=0 +rndc_reload ns1 10.53.0.1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: off (rndc) (stale-answer-ttl=3 max-stale-ttl=20 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "flush cache, re-enable serve-stale and query again ($n)" +ret=0 +$RNDCCMD 10.53.0.1 flushtree example > rndc.out.test$n.1 2>&1 || ret=1 +$RNDCCMD 10.53.0.1 serve-stale on > rndc.out.test$n.2 2>&1 || ret=1 +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$n +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (rndc) (stale-answer-ttl=3 max-stale-ttl=20 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache longttl.example TXT (low max-stale-ttl) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 longttl.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache data.example TXT (low max-stale-ttl) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache othertype.example CAA (low max-stale-ttl) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 othertype.example CAA > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nodata.example TXT (low max-stale-ttl) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nxdomain.example TXT (low max-stale-ttl) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 nxdomain.example TXT > dig.out.test$n +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Keep track of time so we can access these RRset later, when we expect them +# to become ancient. +t1=`$PERL -e 'print time()'` + +n=$((n+1)) +echo_i "verify prime cache statistics (low max-stale-ttl) ($n)" +ret=0 +rm -f ns1/named.stats +$RNDCCMD 10.53.0.1 stats > /dev/null 2>&1 +[ -f ns1/named.stats ] || ret=1 +cp ns1/named.stats ns1/named.stats.$n +# Check first 10 lines of Cache DB statistics. After prime queries, we expect +# two active TXT RRsets, one active Others, one nxrrset TXT, and one NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns1/named.stats.$n > ns1/named.stats.$n.cachedb || ret=1 +grep "2 TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 Others" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 !TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 NXDOMAIN" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +sleep 2 + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.1 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.1 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +n=$((n+1)) +echo_i "check stale data.example TXT (low max-stale-ttl) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale othertype.example CAA (low max-stale-ttl) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "othertype\.example\..*3.*IN.*CAA.*0.*issue" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nodata.example TXT (low max-stale-ttl) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*3.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nxdomain.example TXT (low max-stale-ttl) ($n)" +ret=0 +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*3.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify stale cache statistics (low max-stale-ttl) ($n)" +ret=0 +rm -f ns1/named.stats +$RNDCCMD 10.53.0.1 stats > /dev/null 2>&1 +[ -f ns1/named.stats ] || ret=1 +cp ns1/named.stats ns1/named.stats.$n +# Check first 10 lines of Cache DB statistics. After serve-stale queries, we +# expect one active TXT RRset, one stale TXT, one stale nxrrset TXT, and one +# stale NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns1/named.stats.$n > ns1/named.stats.$n.cachedb || ret=1 +grep "1 TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #Others" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #!TXT" ns1/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #NXDOMAIN" ns1/named.stats.$n.cachedb > /dev/null || ret=1 + +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +# Retrieve max-stale-ttl value. +interval_to_ancient=`grep 'max-stale-ttl' ns1/named2.conf.in | awk '{ print $2 }' | tr -d ';'` +# We add 2 seconds to it since this is the ttl value of the records being +# tested. +interval_to_ancient=$((interval_to_ancient + 2)) +t2=`$PERL -e 'print time()'` +elapsed=$((t2 - t1)) + +# If elapsed time so far is less than max-stale-ttl + 2 seconds, then we sleep +# enough to ensure that we'll ask for ancient RRsets in the next queries. +if [ $elapsed -lt $interval_to_ancient ]; then + sleep $((interval_to_ancient - elapsed)) +fi + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.1 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.1 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +n=$((n+1)) +echo_i "check ancient data.example TXT (low max-stale-ttl) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check ancient othertype.example CAA (low max-stale-ttl) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check ancient nodata.example TXT (low max-stale-ttl) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check ancient nxdomain.example TXT (low max-stale-ttl) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Test stale-refresh-time when serve-stale is enabled via rndc. +# Steps for testing stale-refresh-time option (default). +# 1. Prime cache data.example txt +# 2. Disable responses from authoritative server. +# 3. Sleep for TTL duration so rrset TTL expires (2 sec) +# 4. Query data.example +# 5. Check if response come from stale rrset (3 sec TTL) +# 6. Enable responses from authoritative server. +# 7. Query data.example +# 8. Check if response come from stale rrset, since the query +# is within stale-refresh-time window. +n=$((n+1)) +echo_i "flush cache, enable responses from authoritative server ($n)" +ret=0 +$RNDCCMD 10.53.0.1 flushtree example > rndc.out.test$n.1 2>&1 || ret=1 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (rndc) (stale-answer-ttl=3 max-stale-ttl=20 stale-refresh-time=30)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 1. +n=$((n+1)) +echo_i "prime cache data.example TXT (stale-refresh-time rndc) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*2.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 2. +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 3. +sleep 2 + +# Step 4. +n=$((n+1)) +echo_i "sending query for test ($n)" +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$n + +# Step 5. +echo_i "check stale data.example TXT (stale-refresh-time rndc) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 6. +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 7. +echo_i "sending query for test $((n+1))" +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) + +# Step 8. +n=$((n+1)) +echo_i "check stale data.example TXT comes from cache (stale-refresh-time rndc) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Steps for testing stale-refresh-time option (disabled). +# 1. Prime cache data.example txt +# 2. Disable responses from authoritative server. +# 3. Sleep for TTL duration so rrset TTL expires (2 sec) +# 4. Query data.example +# 5. Check if response come from stale rrset (3 sec TTL) +# 6. Enable responses from authoritative server. +# 7. Query data.example +# 8. Check if response come from stale rrset, since the query +# is within stale-refresh-time window. +n=$((n+1)) +echo_i "updating ns1/named.conf ($n)" +ret=0 +copy_setports ns1/named3.conf.in ns1/named.conf +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc reload' ($n)" +ret=0 +rndc_reload ns1 10.53.0.1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.1 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (rndc) (stale-answer-ttl=3 max-stale-ttl=20 stale-refresh-time=0)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "flush cache, enable responses from authoritative server ($n)" +ret=0 +$RNDCCMD 10.53.0.1 flushtree example > rndc.out.test$n.1 2>&1 || ret=1 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 1. +n=$((n+1)) +echo_i "prime cache data.example TXT (stale-refresh-time disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*2.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 2. +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 3. +sleep 2 + +# Step 4. +n=$((n+1)) +echo_i "sending query for test ($n)" +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$n + +# Step 5. +echo_i "check stale data.example TXT (stale-refresh-time disabled) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 6. +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Step 7. +echo_i "sending query for test $((n+1))" +$DIG -p ${PORT} @10.53.0.1 data.example TXT > dig.out.test$((n+1)) + +# Step 8. +n=$((n+1)) +echo_i "check data.example TXT comes from authoritative (stale-refresh-time disabled) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*2.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# +# Now test server with no serve-stale options set. +# +echo_i "test server with no serve-stale options set" + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache longttl.example TXT (max-stale-ttl default) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 longttl.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache data.example TXT (max-stale-ttl default) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*2.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache othertype.example CAA (max-stale-ttl default) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 othertype.example CAA > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "othertype\.example\..*2.*IN.*CAA.*0.*issue" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nodata.example TXT (max-stale-ttl default) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 nodata.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*2.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nxdomain.example TXT (max-stale-ttl default) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 nxdomain.example TXT > dig.out.test$n +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*2.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify prime cache statistics (max-stale-ttl default) ($n)" +ret=0 +rm -f ns3/named.stats +$RNDCCMD 10.53.0.3 stats > /dev/null 2>&1 +[ -f ns3/named.stats ] || ret=1 +cp ns3/named.stats ns3/named.stats.$n +# Check first 10 lines of Cache DB statistics. After prime queries, we expect +# two active TXT RRsets, one active Others, one nxrrset TXT, and one NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns3/named.stats.$n > ns3/named.stats.$n.cachedb || ret=1 +grep "2 TXT" ns3/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 Others" ns3/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 !TXT" ns3/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 NXDOMAIN" ns3/named.stats.$n.cachedb > /dev/null || ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.3 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep "_default: off (stale-answer-ttl=$stale_answer_ttl max-stale-ttl=$max_stale_ttl stale-refresh-time=30)" rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +sleep 2 + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.3 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.3 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.3 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +n=$((n+1)) +echo_i "check fail of data.example TXT (max-stale-ttl default) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of othertype.example CAA (max-stale-ttl default) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of nodata.example TXT (max-stale-ttl default) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of nxdomain.example TXT (max-stale-ttl default) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify stale cache statistics (max-stale-ttl default) ($n)" +ret=0 +rm -f ns3/named.stats +$RNDCCMD 10.53.0.3 stats > /dev/null 2>&1 +[ -f ns3/named.stats ] || ret=1 +cp ns3/named.stats ns3/named.stats.$n +# Check first 10 lines of Cache DB statistics. After last queries, we expect +# one active TXT RRset, one stale TXT, one stale nxrrset TXT, and one stale +# NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns3/named.stats.$n > ns3/named.stats.$n.cachedb || ret=1 +grep "1 TXT" ns3/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #TXT" ns3/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #Others" ns3/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #!TXT" ns3/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #NXDOMAIN" ns3/named.stats.$n.cachedb > /dev/null || ret=1 + +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +n=$((n+1)) +echo_i "check 'rndc serve-stale on' ($n)" +ret=0 +$RNDCCMD 10.53.0.3 serve-stale on > rndc.out.test$n 2>&1 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.3 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep "_default: on (rndc) (stale-answer-ttl=$stale_answer_ttl max-stale-ttl=$max_stale_ttl stale-refresh-time=30)" rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +sleep 2 + +# Check that if we don't have stale data for a domain name, we will +# not answer anything until the resolver query timeout. +n=$((n+1)) +echo_i "check notincache.example TXT times out (max-stale-ttl default) ($n)" +ret=0 +$DIG -p ${PORT} +tries=1 +timeout=3 @10.53.0.3 notfound.example TXT > dig.out.test$n 2>&1 +grep "connection timed out" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.3 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.3 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.3 nxdomain.example TXT > dig.out.test$((n+4)) & +$DIG -p ${PORT} @10.53.0.3 notfound.example TXT > dig.out.test$((n+5)) + +wait + +n=$((n+1)) +echo_i "check data.example TXT (max-stale-ttl default) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*30.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check othertype.example CAA (max-stale-ttl default) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "example\..*30.*IN.*CAA.*0.*issue" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check nodata.example TXT (max-stale-ttl default) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*30.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check nxdomain.example TXT (max-stale-ttl default) ($n)" +ret=0 +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*30.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# The notfound.example check is different than nxdomain.example because +# we didn't send a prime query to add notfound.example to the cache. +n=$((n+1)) +echo_i "check notfound.example TXT (max-stale-ttl default) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# +# Now test server with serve-stale answers disabled. +# +echo_i "test server with serve-stale disabled" + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache longttl.example TTL (serve-stale answers disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.4 longttl.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache data.example TTL (serve-stale answers disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.4 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*2.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache othertype.example CAA (serve-stale answers disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.4 othertype.example CAA > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "othertype\.example\..*2.*IN.*CAA.*0.*issue" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nodata.example TXT (serve-stale answers disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.4 nodata.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*2.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nxdomain.example TXT (serve-stale answers disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.4 nxdomain.example TXT > dig.out.test$n +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*2.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify prime cache statistics (serve-stale answers disabled) ($n)" +ret=0 +rm -f ns4/named.stats +$RNDCCMD 10.53.0.4 stats > /dev/null 2>&1 +[ -f ns4/named.stats ] || ret=1 +cp ns4/named.stats ns4/named.stats.$n +# Check first 10 lines of Cache DB statistics. After prime queries, we expect +# two active TXT RRsets, one active Others, one nxrrset TXT, and one NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns4/named.stats.$n > ns4/named.stats.$n.cachedb || ret=1 +grep "2 TXT" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 Others" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 !TXT" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 NXDOMAIN" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.4 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep "_default: off (stale-answer-ttl=$stale_answer_ttl max-stale-ttl=$max_stale_ttl stale-refresh-time=30)" rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +sleep 2 + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.4 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.4 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.4 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.4 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +n=$((n+1)) +echo_i "check fail of data.example TXT (serve-stale answers disabled) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of othertype.example TXT (serve-stale answers disabled) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of nodata.example TXT (serve-stale answers disabled) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of nxdomain.example TXT (serve-stale answers disabled) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify stale cache statistics (serve-stale answers disabled) ($n)" +ret=0 +rm -f ns4/named.stats +$RNDCCMD 10.53.0.4 stats > /dev/null 2>&1 +[ -f ns4/named.stats ] || ret=1 +cp ns4/named.stats ns4/named.stats.$n +# Check first 10 lines of Cache DB statistics. After last queries, we expect +# one active TXT RRset, one stale TXT, one stale nxrrset TXT, and one stale +# NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns4/named.stats.$n > ns4/named.stats.$n.cachedb || ret=1 +grep "1 TXT" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #TXT" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #Others" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #!TXT" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 #NXDOMAIN" ns4/named.stats.$n.cachedb > /dev/null || ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +# Dump the cache. +n=$((n+1)) +echo_i "dump the cache (serve-stale answers disabled) ($n)" +ret=0 +rndc_dumpdb ns4 -cache || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "stop ns4" +stop_server --use-rndc --port ${CONTROLPORT} ns4 + +# Load the cache as if it was five minutes (RBTDB_VIRTUAL) older. Since +# max-stale-ttl defaults to a week, we need to adjust the date by one week and +# five minutes. +LASTWEEK=`TZ=UTC perl -e 'my $now = time(); + my $oneWeekAgo = $now - 604800; + my $fiveMinutesAgo = $oneWeekAgo - 300; + my ($s, $m, $h, $d, $mo, $y) = (localtime($fiveMinutesAgo))[0, 1, 2, 3, 4, 5]; + printf("%04d%02d%02d%02d%02d%02d", $y+1900, $mo+1, $d, $h, $m, $s);'` + +echo_i "mock the cache date to $LASTWEEK (serve-stale answers disabled) ($n)" +ret=0 +sed -E "s/DATE [0-9]{14}/DATE $LASTWEEK/g" ns4/named_dump.db.test$n > ns4/named_dump.db.out || ret=1 +cp ns4/named_dump.db.out ns4/named_dump.db +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "start ns4" +start_server --noclean --restart --port ${PORT} ns4 + +n=$((n+1)) +echo_i "verify ancient cache statistics (serve-stale answers disabled) ($n)" +ret=0 +rm -f ns4/named.stats +$RNDCCMD 10.53.0.4 stats #> /dev/null 2>&1 +[ -f ns4/named.stats ] || ret=1 +cp ns4/named.stats ns4/named.stats.$n +# Check first 10 lines of Cache DB statistics. After last queries, we expect +# everything to be removed or scheduled to be removed. +grep -A 10 "++ Cache DB RRsets ++" ns4/named.stats.$n > ns4/named.stats.$n.cachedb || ret=1 +grep "#TXT" ns4/named.stats.$n.cachedb > /dev/null && ret=1 +grep "#Others" ns4/named.stats.$n.cachedb > /dev/null && ret=1 +grep "#!TXT" ns4/named.stats.$n.cachedb > /dev/null && ret=1 +grep "#NXDOMAIN" ns4/named.stats.$n.cachedb > /dev/null && ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +# +# Test the server with stale-cache disabled. +# +echo_i "test server with serve-stale cache disabled" + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache longttl.example TXT (serve-stale cache disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.5 longttl.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache data.example TXT (serve-stale cache disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.5 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*2.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache othertype.example CAA (serve-stale cache disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.5 othertype.example CAA > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "othertype\.example\..*2.*IN.*CAA.*0.*issue" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nodata.example TXT (serve-stale cache disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.5 nodata.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*2.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nxdomain.example TXT (serve-stale cache disabled) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.5 nxdomain.example TXT > dig.out.test$n +grep "status: NXDOMAIN" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*2.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify prime cache statistics (serve-stale cache disabled) ($n)" +ret=0 +rm -f ns5/named.stats +$RNDCCMD 10.53.0.5 stats > /dev/null 2>&1 +[ -f ns5/named.stats ] || ret=1 +cp ns5/named.stats ns5/named.stats.$n +# Check first 10 lines of Cache DB statistics. After serve-stale queries, +# we expect two active TXT RRsets, one active Others, one nxrrset TXT, and +# one NXDOMAIN. +grep -A 10 "++ Cache DB RRsets ++" ns5/named.stats.$n > ns5/named.stats.$n.cachedb || ret=1 +grep "2 TXT" ns5/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 Others" ns5/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 !TXT" ns5/named.stats.$n.cachedb > /dev/null || ret=1 +grep "1 NXDOMAIN" ns5/named.stats.$n.cachedb > /dev/null || ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.5 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep "_default: off (not-cached)" rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +sleep 2 + +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.5 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.5 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.5 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.5 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +n=$((n+1)) +echo_i "check fail of data.example TXT (serve-stale cache disabled) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of othertype.example CAA (serve-stale cache disabled) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of nodata.example TXT (serve-stale cache disabled) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check fail of nxdomain.example TXT (serve-stale cache disabled) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "verify stale cache statistics (serve-stale cache disabled) ($n)" +ret=0 +rm -f ns5/named.stats +$RNDCCMD 10.53.0.5 stats > /dev/null 2>&1 +[ -f ns5/named.stats ] || ret=1 +cp ns5/named.stats ns5/named.stats.$n +# Check first 10 lines of Cache DB statistics. After serve-stale queries, +# we expect one active TXT (longttl) and the rest to be expired from cache, +# but since we keep everything for 5 minutes (RBTDB_VIRTUAL) in the cache +# after expiry, they still show up in the stats. +grep -A 10 "++ Cache DB RRsets ++" ns5/named.stats.$n > ns5/named.stats.$n.cachedb || ret=1 +grep -F "1 Others" ns5/named.stats.$n.cachedb > /dev/null || ret=1 +grep -F "2 TXT" ns5/named.stats.$n.cachedb > /dev/null || ret=1 +grep -F "1 !TXT" ns5/named.stats.$n.cachedb > /dev/null || ret=1 +grep -F "1 NXDOMAIN" ns5/named.stats.$n.cachedb > /dev/null || ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +# Dump the cache. +n=$((n+1)) +echo_i "dump the cache (serve-stale cache disabled) ($n)" +ret=0 +rndc_dumpdb ns5 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) +# Check that expired records are not dumped. +ret=0 +grep "; expired since .* (awaiting cleanup)" ns5/named_dump.db.test$n && ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Dump the cache including expired entries. +n=$((n+1)) +echo_i "dump the cache including expired entries (serve-stale cache disabled) ($n)" +ret=0 +rndc_dumpdb ns5 -expired || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Check that expired records are dumped. +echo_i "check rndc dump expired data.example ($n)" +ret=0 +awk '/; expired/ { x=$0; getline; print x, $0}' ns5/named_dump.db.test$n | + grep "; expired since .* (awaiting cleanup) data\.example\..*A text record with a 2 second ttl" > /dev/null 2>&1 || ret=1 +awk '/; expired/ { x=$0; getline; print x, $0}' ns5/named_dump.db.test$n | + grep "; expired since .* (awaiting cleanup) nodata\.example\." > /dev/null 2>&1 || ret=1 +awk '/; expired/ { x=$0; getline; print x, $0}' ns5/named_dump.db.test$n | + grep "; expired since .* (awaiting cleanup) nxdomain\.example\." > /dev/null 2>&1 || ret=1 +awk '/; expired/ { x=$0; getline; print x, $0}' ns5/named_dump.db.test$n | + grep "; expired since .* (awaiting cleanup) othertype\.example\." > /dev/null 2>&1 || ret=1 +# Also make sure the not expired data does not have an expired comment. +awk '/; answer/ { x=$0; getline; print x, $0}' ns5/named_dump.db.test$n | + grep "; answer longttl\.example.*A text record with a 600 second ttl" > /dev/null 2>&1 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "stop ns5" +stop_server --use-rndc --port ${CONTROLPORT} ns5 + +# Load the cache as if it was five minutes (RBTDB_VIRTUAL) older. +cp ns5/named_dump.db.test$n ns5/named_dump.db +FIVEMINUTESAGO=`TZ=UTC perl -e 'my $now = time(); + my $fiveMinutesAgo = 300; + my ($s, $m, $h, $d, $mo, $y) = (localtime($fiveMinutesAgo))[0, 1, 2, 3, 4, 5]; + printf("%04d%02d%02d%02d%02d%02d", $y+1900, $mo+1, $d, $h, $m, $s);'` + +n=$((n+1)) +echo_i "mock the cache date to $FIVEMINUTESAGO (serve-stale cache disabled) ($n)" +ret=0 +sed -E "s/DATE [0-9]{14}/DATE $FIVEMINUTESAGO/g" ns5/named_dump.db > ns5/named_dump.db.out || ret=1 +cp ns5/named_dump.db.out ns5/named_dump.db +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "start ns5" +start_server --noclean --restart --port ${PORT} ns5 + +n=$((n+1)) +echo_i "verify ancient cache statistics (serve-stale cache disabled) ($n)" +ret=0 +rm -f ns5/named.stats +$RNDCCMD 10.53.0.5 stats #> /dev/null 2>&1 +[ -f ns5/named.stats ] || ret=1 +cp ns5/named.stats ns5/named.stats.$n +# Check first 10 lines of Cache DB statistics. After last queries, we expect +# everything to be removed or scheduled to be removed. +grep -A 10 "++ Cache DB RRsets ++" ns5/named.stats.$n > ns5/named.stats.$n.cachedb || ret=1 +grep -F "#TXT" ns5/named.stats.$n.cachedb > /dev/null && ret=1 +grep -F "#Others" ns5/named.stats.$n.cachedb > /dev/null && ret=1 +grep -F "#!TXT" ns5/named.stats.$n.cachedb > /dev/null && ret=1 +grep -F "#NXDOMAIN" ns5/named.stats.$n.cachedb > /dev/null && ret=1 +status=$((status+ret)) +if [ $ret != 0 ]; then echo_i "failed"; fi + +################################################ +# Test for stale-answer-client-timeout (1.8s). # +################################################ +echo_i "test stale-answer-client-timeout (1.8)" + +n=$((n+1)) +echo_i "updating ns3/named.conf ($n)" +ret=0 +copy_setports ns3/named2.conf.in ns3/named.conf +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "restart ns3" +stop_server --use-rndc --port ${CONTROLPORT} ns3 +start_server --noclean --restart --port ${PORT} ns3 + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.3 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (stale-answer-ttl=3 max-stale-ttl=3600 stale-refresh-time=0)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache data.example TXT (stale-answer-client-timeout) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nodata.example TXT (stale-answer-client-timeout) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 nodata.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "delay responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt slowdown > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache data.slow TXT (stale-answer-client-timeout) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 data.slow TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow RRset to become stale. +sleep 2 + +nextpart ns3/named.run > /dev/null + +echo_i "sending queries for tests $((n+1))-$((n+3))..." +t1=`$PERL -e 'print time()'` +$DIG -p ${PORT} +tries=1 +timeout=10 @10.53.0.3 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} +tries=1 +timeout=10 @10.53.0.3 nodata.example TXT > dig.out.test$((n+2)) +$DIG -p ${PORT} +tries=1 +timeout=10 @10.53.0.3 data.slow TXT > dig.out.test$((n+3)) & +wait +t2=`$PERL -e 'print time()'` + +# We configured a long value of 30 seconds for resolver-query-timeout. +# That should give us enough time to receive an stale answer from cache +# after stale-answer-client-timeout timer of 1.8 sec triggers. +n=$((n+1)) +echo_i "check stale data.example TXT comes from cache (stale-answer-client-timeout 1.8) ($n)" +ret=0 +wait_for_log 5 "data.example client timeout, stale answer used" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +# Configured stale-answer-client-timeout is 1.8s, we allow some extra time +# just in case other tests are taking too much cpu. +[ $((t2 - t1)) -le 10 ] || { echo_i "query took $((t2 - t1))s to resolve."; ret=1; } +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nodata.example TXT comes from cache (stale-answer-client-timeout 1.8) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*3.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale data.slow TXT comes from cache (stale-answer-client-timeout 1.8) ($n)" +ret=0 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.slow\..*3.*IN.*TXT.*A slow text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Now query for RRset not in cache. The first query should time out, but once +# we enable the authoritative server, the second query should be able to get a +# response. + +nextpart ns3/named.run > /dev/null + +echo_i "sending queries for tests $((n+2))-$((n+4))..." +$DIG -p ${PORT} +tries=1 +timeout=3 @10.53.0.3 longttl.example TXT > dig.out.test$((n+2)) & +$DIG -p ${PORT} +tries=1 +timeout=10 @10.53.0.3 longttl.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} +tries=1 +timeout=3 @10.53.0.3 longttl.example RRSIG > dig.out.test$((n+4)) & + +# Enable the authoritative name server after stale-answer-client-timeout. +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +sleep 4 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check not in cache longttl.example TXT times out (stale-answer-client-timeout 1.8) ($n)" +ret=0 +wait_for_log 4 "longttl.example client timeout, stale answer unavailable" ns3/named.run || ret=1 +check_results() { + [ -s "$1" ] || return 1 + grep "connection timed out" "$1" > /dev/null || return 1 + return 0 +} +retry_quiet 4 check_results dig.out.test$n || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check not in cache longttl.example TXT comes from authoritative (stale-answer-client-timeout 1.8) ($n)" +ret=0 +check_results() { + [ -s "$1" ] || return 1 + grep "status: NOERROR" "$1" > /dev/null || return 1 + grep "ANSWER: 1," "$1" > /dev/null || return 1 + return 0 +} +retry_quiet 8 check_results dig.out.test$n || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check not in cache longttl.example RRSIG times out (stale-answer-client-timeout 1.8) ($n)" +ret=0 +check_results() { + [ -s "$1" ] || return 1 + grep "connection timed out" "$1" > /dev/null || return 1 + return 0 +} +retry_quiet 8 check_results dig.out.test$n || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# CVE-2022-3924, GL #3619 +n=$((n+1)) +echo_i "check that named survives reaching recursive-clients quota (stale-answer-client-timeout 1.8) ($n)" +ret=0 +num=0 +# Make sure to exceed the configured value of 'recursive-clients 10;' by running +# 20 parallel queries with simulated network latency. +while [ $num -lt 20 ]; do + $DIG +tries=1 -p ${PORT} @10.53.0.3 "latency${num}.data.example" TXT >/dev/null 2>&1 & + num=$((num+1)) +done; +check_server_responds() { + $DIG -p ${PORT} @10.53.0.3 version.bind txt ch >dig.out.test$n || return 1 + grep "status: NOERROR" dig.out.test$n > /dev/null || return 1 +} +retry_quiet 5 check_server_responds || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +############################################# +# Test for stale-answer-client-timeout off. # +############################################# +echo_i "test stale-answer-client-timeout (off)" + +n=$((n+1)) +echo_i "updating ns3/named.conf ($n)" +ret=0 +copy_setports ns3/named3.conf.in ns3/named.conf +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc reload' ($n)" +ret=0 +rndc_reload ns3 10.53.0.3 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Send a query, auth server is disabled, we will enable it after a while in +# order to receive an answer before resolver-query-timeout expires. Since +# stale-answer-client-timeout is disabled we must receive an answer from +# authoritative server. +echo_i "sending query for test $((n+2))" +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$((n+2)) & +sleep 3 + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Wait until dig is done. +wait + +n=$((n+1)) +echo_i "check data.example TXT comes from authoritative server (stale-answer-client-timeout off) ($n)" +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*[12].*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +############################################################## +# Test for stale-answer-client-timeout off and CNAME record. # +############################################################## +echo_i "test stale-answer-client-timeout (0) and CNAME record" + +n=$((n+1)) +echo_i "prime cache shortttl.cname.example (stale-answer-client-timeout off) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 shortttl.cname.example A > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.test$n > /dev/null || ret=1 +grep "shortttl\.cname\.example\..*1.*IN.*CNAME.*longttl\.target\.example\." dig.out.test$n > /dev/null || ret=1 +grep "longttl\.target\.example\..*600.*IN.*A.*10\.53\.0\.2" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow RRset to become stale. +sleep 1 + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +ret=0 +echo_i "check stale shortttl.cname.example comes from cache (stale-answer-client-timeout off) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 shortttl.cname.example A > dig.out.test$n +wait_for_log 5 "shortttl.cname.example resolver failure, stale answer used" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.test$n > /dev/null || ret=1 +grep "shortttl\.cname\.example\..*3.*IN.*CNAME.*longttl\.target\.example\." dig.out.test$n > /dev/null || ret=1 +# We can't reliably test the TTL of the longttl.target.example A record. +grep "longttl\.target\.example\..*IN.*A.*10\.53\.0\.2" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check server is alive or restart ($n)" +ret=0 +$RNDCCMD 10.53.0.3 status > rndc.out.test$n 2>&1 || ret=1 +if [ $ret != 0 ]; then + echo_i "failed" + echo_i "restart ns3" + start_server --noclean --restart --port ${PORT} serve-stale ns3 +fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check server is alive or restart ($n)" +ret=0 +$RNDCCMD 10.53.0.3 status > rndc.out.test$n 2>&1 || ret=1 +if [ $ret != 0 ]; then + echo_i "failed" + echo_i "restart ns3" + start_server --noclean --restart --port ${PORT} serve-stale ns3 +fi +status=$((status+ret)) + +############################################# +# Test for stale-answer-client-timeout 0. # +############################################# +echo_i "test stale-answer-client-timeout (0)" + +n=$((n+1)) +echo_i "updating ns3/named.conf ($n)" +ret=0 +copy_setports ns3/named4.conf.in ns3/named.conf +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "restart ns3" +stop_server --use-rndc --port ${CONTROLPORT} ns3 +start_server --noclean --restart --port ${PORT} ns3 + +n=$((n+1)) +echo_i "prime cache data.example TXT (stale-answer-client-timeout 0)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache nodata.example TXT (stale-answer-client-timeout 0)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 nodata.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow RRset to become stale. +sleep 2 + +n=$((n+1)) +ret=0 +echo_i "check stale nodata.example TXT comes from cache (stale-answer-client-timeout 0) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 nodata.example TXT > dig.out.test$n +wait_for_log 5 "nodata.example stale answer used, an attempt to refresh the RRset" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1 +grep "example\..*3.*IN.*SOA" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT comes from cache (stale-answer-client-timeout 0) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +wait_for_log 5 "data.example stale answer used, an attempt to refresh the RRset" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +wait_for_rrset_refresh() { + $DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n + grep "status: NOERROR" dig.out.test$n > /dev/null || return 1 + grep "ANSWER: 1," dig.out.test$n > /dev/null || return 1 + grep "data\.example\..*[12].*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || return 1 +} + +# This test ensures that after we get stale data due to +# stale-answer-client-timeout 0, enabling the authoritative server will allow +# the RRset to be updated. +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT was refreshed (stale-answer-client-timeout 0) ($n)" +retry_quiet 10 wait_for_rrset_refresh || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +wait_for_nodata_refresh() { + $DIG -p ${PORT} @10.53.0.3 nodata.example TXT > dig.out.test$n + grep "status: NOERROR" dig.out.test$n > /dev/null || return 1 + grep "ANSWER: 0," dig.out.test$n > /dev/null || return 1 + grep "example\..*[12].*IN.*SOA" dig.out.test$n > /dev/null || return 1 + return 0 +} + +n=$((n+1)) +ret=0 +echo_i "check stale nodata.example TXT was refreshed (stale-answer-client-timeout 0) ($n)" +retry_quiet 10 wait_for_nodata_refresh || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +#################################################################### +# Test for stale-answer-client-timeout 0 and recursive-clients 10. # +# CVE-2023-2911, GL #4089 # +# ################################################################## +echo_i "test stale-answer-client-timeout (0) and recursive-clients 10" + +n=$((n+1)) +echo_i "prime cache data.slow TXT (stale-answer-client-timeout 0) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 data.slow TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Run the following check twice. Sometimes a priming query interrupts the first +# attempt to exceed the quota. +attempt=0 +while [ $ret -eq 0 ] && [ $attempt -lt 2 ]; do + n=$((n+1)) + echo_i "slow down response from authoritative server ($n)" + ret=0 + $DIG -p ${PORT} @10.53.0.2 slowdown TXT > dig.out.test$n + grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 + grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 + if [ $ret != 0 ]; then echo_i "failed"; fi + status=$((status+ret)) + + # Let the data.slow TTL expire + sleep 2 + + n=$((n+1)) + echo_i "check that named survives reaching recursive-clients quota (stale-answer-client-timeout 0) ($n)" + ret=0 + num=0 + # Attempt to exceed the configured value of 'recursive-clients 10;' by running + # 20 parallel queries for the stale domain which has slow auth. + while [ $num -lt 20 ]; do + $DIG +tries=1 +timeout=10 -p ${PORT} @10.53.0.3 data.slow TXT >/dev/null 2>&1 & + num=$((num+1)) + done; + # Let the dig processes finish. + wait + retry_quiet 5 check_server_responds || ret=1 + if [ $ret != 0 ]; then echo_i "failed"; fi + status=$((status+ret)) + + attempt=$((attempt+1)) +done + +# Restart ns3 to avoid the exceeded recursive-clients limit from previous check +# to interfere with subsequent checks. +echo_i "restart ns3" +stop_server --use-rndc --port ${CONTROLPORT} ns3 +start_server --noclean --restart --port ${PORT} ns3 + +############################################################ +# Test for stale-answer-client-timeout 0 and CNAME record. # +############################################################ +echo_i "test stale-answer-client-timeout (0) and CNAME record" + +n=$((n+1)) +echo_i "prime cache cname1.stale.test A (stale-answer-client-timeout 0) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 cname1.stale.test A > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.test$n > /dev/null || ret=1 +grep "cname1\.stale\.test\..*1.*IN.*CNAME.*a1\.stale\.test\." dig.out.test$n > /dev/null || ret=1 +grep "a1\.stale\.test\..*1.*IN.*A.*192\.0\.2\.1" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow RRset to become stale. +sleep 1 + +n=$((n+1)) +ret=0 +echo_i "check stale cname1.stale.test A comes from cache (stale-answer-client-timeout 0) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 cname1.stale.test A > dig.out.test$n +wait_for_log 5 "cname1.stale.test stale answer used, an attempt to refresh the RRset" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.test$n > /dev/null || ret=1 +grep "cname1\.stale\.test\..*3.*IN.*CNAME.*a1\.stale\.test\." dig.out.test$n > /dev/null || ret=1 +grep "a1\.stale\.test\..*3.*IN.*A.*192\.0\.2\.1" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check server is alive or restart ($n)" +ret=0 +$RNDCCMD 10.53.0.3 status > rndc.out.test$n 2>&1 || ret=1 +if [ $ret != 0 ]; then + echo_i "failed" + echo_i "restart ns3" + start_server --noclean --restart --port ${PORT} ns3 +fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache cname2.stale.test A (stale-answer-client-timeout 0) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 cname2.stale.test A > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.test$n > /dev/null || ret=1 +grep "cname2\.stale\.test\..*1.*IN.*CNAME.*a2\.stale\.test\." dig.out.test$n > /dev/null || ret=1 +grep "a2\.stale\.test\..*300.*IN.*A.*192\.0\.2\.2" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow CNAME record in the RRSET to become stale. +sleep 1 + +n=$((n+1)) +ret=0 +echo_i "check stale cname2.stale.test A comes from cache (stale-answer-client-timeout 0) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 cname2.stale.test A > dig.out.test$n +wait_for_log 5 "cname2.stale.test stale answer used, an attempt to refresh the RRset" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.test$n > /dev/null || ret=1 +grep "cname2\.stale\.test\..*3.*IN.*CNAME.*a2\.stale\.test\." dig.out.test$n > /dev/null || ret=1 +# We can't reliably test the TTL of the a2.stale.test A record. +grep "a2\.stale\.test\..*IN.*A.*192\.0\.2\.2" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check server is alive or restart ($n)" +ret=0 +$RNDCCMD 10.53.0.3 status > rndc.out.test$n 2>&1 || ret=1 +if [ $ret != 0 ]; then + echo_i "failed" + echo_i "restart ns3" + start_server --noclean --restart --port ${PORT} ns3 +fi +status=$((status+ret)) + +#################################################################### +# Test for stale-answer-client-timeout 0 and stale-refresh-time 4. # +#################################################################### +echo_i "test stale-answer-client-timeout (0) and stale-refresh-time (4)" + +n=$((n+1)) +echo_i "updating ns3/named.conf ($n)" +ret=0 +copy_setports ns3/named5.conf.in ns3/named.conf +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc reload' ($n)" +ret=0 +rndc_reload ns3 10.53.0.3 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "flush cache, enable responses from authoritative server ($n)" +ret=0 +$RNDCCMD 10.53.0.3 flushtree example > rndc.out.test$n.1 2>&1 || ret=1 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "prime cache data.example TXT (stale-answer-client-timeout 0, stale-refresh-time 4) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*2.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow RRset to become stale. +sleep 2 + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT comes from cache (stale-answer-client-timeout 0 stale-refresh-time 4) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +wait_for_log 5 "data.example stale answer used, an attempt to refresh the RRset" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# This test ensures that after we get stale data due to +# stale-answer-client-timeout 0, enabling the authoritative server will allow +# the RRset to be updated. +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT was refreshed (stale-answer-client-timeout 0 stale-refresh-time 4) ($n)" +retry_quiet 10 wait_for_rrset_refresh || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow RRset to become stale. +sleep 2 + +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT comes from cache (stale-answer-client-timeout 0 stale-refresh-time 4) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +wait_for_log 5 "data.example stale answer used, an attempt to refresh the RRset" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow stale-refresh-time to be activated. +n=$((n+1)) +ret=0 +echo_i "wait until resolver query times out, activating stale-refresh-time" +wait_for_log 15 "data.example resolver failure, stale answer used" ns3/named.run || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT comes from cache within stale-refresh-time (stale-answer-client-timeout 0 stale-refresh-time 4) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +wait_for_log 5 "data.example query within stale refresh time" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "enable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt enable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# We give BIND some time to ensure that after we enable authoritative server, +# this RRset is still not refreshed because it was hit during +# stale-refresh-time window. +sleep 1 + +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT was not refreshed (stale-answer-client-timeout 0 stale-refresh-time 4) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +wait_for_log 5 "data.example query within stale refresh time" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# After the refresh-time-window, the RRset will be refreshed. +sleep 4 + +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT comes from cache (stale-answer-client-timeout 0 stale-refresh-time 4) ($n)" +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +wait_for_log 5 "data.example stale answer used, an attempt to refresh the RRset" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT was refreshed (stale-answer-client-timeout 0 stale-refresh-time 4) ($n)" +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*[12].*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +#################################################################### +# Test serve-stale's interaction with fetch limits (cache only) # +################################################################# +echo_i "test serve-stale's interaction with fetch-limits (cache only)" + +# We update the named configuration to enable fetch-limits. The fetch-limits +# are set to 1, which is ridiciously low, but that is because for this test we +# want to reach the fetch-limits. +n=$((n+1)) +echo_i "updating ns3/named.conf ($n)" +ret=0 +copy_setports ns3/named6.conf.in ns3/named.conf +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc reload' ($n)" +ret=0 +rndc_reload ns3 10.53.0.3 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Disable responses from authoritative server. If we can't resolve the example +# zone, fetch limits will be reached. +n=$((n+1)) +echo_i "disable responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt disable > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"0\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Allow RRset to become stale. +sleep 2 + +# Turn on serve-stale. +n=$((n+1)) +echo_i "running 'rndc serve-stale on' ($n)" +ret=0 +$RNDCCMD 10.53.0.3 serve-stale on || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check 'rndc serve-stale status' ($n)" +ret=0 +$RNDCCMD 10.53.0.3 serve-stale status > rndc.out.test$n 2>&1 || ret=1 +grep '_default: on (rndc) (stale-answer-ttl=3 max-stale-ttl=3600 stale-refresh-time=4)' rndc.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Hit the fetch-limits. We burst the name server with a small batch of queries. +# Only 2 queries are required to hit the fetch-limits. The first query will +# start to resolve, the second one hit the fetch-limits. +burst() { + num=${1} + rm -f burst.input.$$ + while [ $num -gt 0 ]; do + num=`expr $num - 1` + echo "fetch${num}.example A" >> burst.input.$$ + done + $PERL ../ditch.pl -p ${PORT} -s 10.53.0.3 burst.input.$$ + rm -f burst.input.$$ +} + +wait_for_fetchlimits() { + burst 2 + # We expect a query for nx.example to fail because fetch-limits for + # the domain 'example.' (and everything below) has been reached. + $DIG -p ${PORT} +tries=1 +timeout=1 @10.53.0.3 nx.example > dig.out.test$n + grep "status: SERVFAIL" dig.out.test$n > /dev/null || return 1 +} + +n=$((n+1)) +echo_i "hit fetch limits ($n)" +ret=0 +retry_quiet 10 wait_for_fetchlimits || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Expect stale data now (because fetch-limits for the domain 'example.' (and +# everything below) has been reached. But we have a stale RRset for +# 'data.example/TXT' that can be used. +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT comes from cache (fetch-limits) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +wait_for_log 5 "data.example resolver failure, stale answer used" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# The previous query should not have started the stale-refresh-time window. +n=$((n+1)) +ret=0 +echo_i "check stale data.example TXT comes from cache again (fetch-limits) ($n)" +nextpart ns3/named.run > /dev/null +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$n +wait_for_log 5 "data.example resolver failure, stale answer used" ns3/named.run || ret=1 +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "data\.example\..*3.*IN.*TXT.*A text record with a 2 second ttl" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +######################################################################## +# Test serve-stale's interaction with fetch limits (dual-mode) # +######################################################################## +echo_i "test serve-stale's interaction with fetch limits (dual-mode)" + +# Update named configuration so that ns3 becomes a recursive resolver which is +# also a secondary server for the root zone. +n=$((n+1)) +echo_i "updating ns3/named.conf ($n)" +ret=0 +copy_setports ns3/named7.conf.in ns3/named.conf +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "running 'rndc reload' ($n)" +ret=0 +rndc_reload ns3 10.53.0.3 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Flush the cache to ensure the example/NS RRset cached during previous tests +# does not override the authoritative delegation found in the root zone. +n=$((n+1)) +echo_i "flush cache ($n)" +ret=0 +$RNDCCMD 10.53.0.3 flush > rndc.out.test$n 2>&1 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Query name server with low fetch limits. The authoritative server (ans2) is +# not responding. Sending queries for multiple names in the 'example' zone +# in parallel causes the fetch limit for that zone (set to 1) to be +# reached. This should not trigger a crash. +echo_i "sending queries for tests $((n+1))-$((n+4))..." +$DIG -p ${PORT} @10.53.0.3 data.example TXT > dig.out.test$((n+1)) & +$DIG -p ${PORT} @10.53.0.3 othertype.example CAA > dig.out.test$((n+2)) & +$DIG -p ${PORT} @10.53.0.3 nodata.example TXT > dig.out.test$((n+3)) & +$DIG -p ${PORT} @10.53.0.3 nxdomain.example TXT > dig.out.test$((n+4)) + +wait + +# Expect SERVFAIL for the entries not in cache. +n=$((n+1)) +echo_i "check stale data.example TXT (fetch-limits dual-mode) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale othertype.example CAA (fetch-limits dual-mode) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nodata.example TXT (fetch-limits dual-mode) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check stale nxdomain.example TXT (fetch-limits dual-mode) ($n)" +ret=0 +grep "status: SERVFAIL" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check DNS64 processing of a stale negative answer ($n)" +ret=0 +# configure ns3 with dns64 +copy_setports ns3/named8.conf.in ns3/named.conf +rndc_reload ns3 10.53.0.3 +# flush cache, enable ans2 responses, make sure serve-stale is on +$RNDCCMD 10.53.0.3 flush > rndc.out.test$n.1 2>&1 || ret=1 +$DIG -p ${PORT} @10.53.0.2 txt enable > /dev/null +$RNDCCMD 10.53.0.3 serve-stale on > rndc.out.test$n.2 2>&1 || ret=1 +# prime the cache with an AAAA NXRRSET response +$DIG -p ${PORT} @10.53.0.3 a-only.example AAAA > dig.out.1.test$n +grep "status: NOERROR" dig.out.1.test$n > /dev/null || ret=1 +grep "2001:aaaa" dig.out.1.test$n > /dev/null || ret=1 +# disable responses from the auth server +$DIG -p ${PORT} @10.53.0.2 txt disable > /dev/null +# wait two seconds for the previous answer to become stale +sleep 2 +# resend the query and wait in the background; we should get a stale answer +$DIG -p ${PORT} @10.53.0.3 a-only.example AAAA > dig.out.2.test$n & +# re-enable queries after a pause, so the server gets a real answer too +sleep 2 +$DIG -p ${PORT} @10.53.0.2 txt enable > /dev/null +wait +grep "status: NOERROR" dig.out.2.test$n > /dev/null || ret=1 +grep "2001:aaaa" dig.out.2.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +########################################################### +# Test serve-stale's interaction with prefetch processing # +########################################################### +echo_i "test serve-stale's interaction with prefetch processing" + +# Test case for #2733, ensuring that prefetch queries do not trigger +# a lookup due to stale-answer-client-timeout. +# +# 1. Cache the following records: +# cname.example 7 IN CNAME target.example. +# target.example 9 IN A <addr>. +# 2. Let the CNAME RRset expire. +# 3. Query for 'cname.example/A'. +# +# This starts recursion because cname.example/CNAME is expired. +# The authoritative server is up so likely it will respond before +# stale-answer-client-timeout is triggered. +# The 'target.example/A' RRset is found in cache with a positive value +# and is eligble for prefetching. +# A prefetch is done for 'target.example/A', our ans2 server will +# delay the request. +# The 'prefetch_done()' callback should have the right event type +# (DNS_EVENT_FETCHDONE). + +# flush cache +n=$((n+1)) +echo_i "flush cache ($n)" +ret=0 +$RNDCCMD 10.53.0.3 flushtree example > rndc.out.test$n.1 2>&1 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# prime the cache with CNAME and A; CNAME expires sooner +n=$((n+1)) +echo_i "prime cache cname.example A (stale-answer-client-timeout 1.8) ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 cname.example A > dig.out.test$n +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.test$n > /dev/null || ret=1 +grep "cname\.example\..*7.*IN.*CNAME.*target\.example\." dig.out.test$n > /dev/null || ret=1 +grep "target\.example\..*9.*IN.*A" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# wait for the CNAME to be stale; A will still be valid and in prefetch window. +# (the longer TTL is needed, otherwise data won't be prefetch-eligible.) +sleep 7 + +# re-enable auth responses, but with a delay answering the A +n=$((n+1)) +echo_i "delay responses from authoritative server ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.2 txt slowdown > dig.out.test$n +grep "ANSWER: 1," dig.out.test$n > /dev/null || ret=1 +grep "TXT.\"1\"" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# resend the query and wait in the background; we should get a stale answer +n=$((n+1)) +echo_i "check prefetch processing of a stale CNAME target ($n)" +ret=0 +$DIG -p ${PORT} @10.53.0.3 cname.example A > dig.out.test$n & +sleep 2 +wait +grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.test$n > /dev/null || ret=1 +grep "cname\.example\..*7.*IN.*CNAME.*target\.example\." dig.out.test$n > /dev/null || ret=1 +grep "target\.example\..*[1-2].*IN.*A" dig.out.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "exit status: $status" +[ $status -eq 0 ] || exit 1 |