diff options
Diffstat (limited to '')
| -rw-r--r-- | bin/tools/mdig.rst | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/bin/tools/mdig.rst b/bin/tools/mdig.rst new file mode 100644 index 0000000..50aa588 --- /dev/null +++ b/bin/tools/mdig.rst @@ -0,0 +1,322 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. highlight: console + +.. _man_mdig: + +mdig - DNS pipelined lookup utility +----------------------------------- + +Synopsis +~~~~~~~~ + +:program:`mdig` {@server} [**-f** filename] [**-h**] [**-v**] [ [**-4**] | [**-6**] ] [**-m**] [**-b** address] [**-p** port#] [**-c** class] [**-t** type] [**-i**] [**-x** addr] [plusopt...] + +:program:`mdig` {**-h**} + +:program:`mdig` [@server] {global-opt...} { {local-opt...} {query} ...} + +Description +~~~~~~~~~~~ + +``mdig`` is a multiple/pipelined query version of ``dig``: instead of +waiting for a response after sending each query, it begins by sending +all queries. Responses are displayed in the order in which they are +received, not in the order the corresponding queries were sent. + +``mdig`` options are a subset of the ``dig`` options, and are divided +into "anywhere options," which can occur anywhere, "global options," which +must occur before the query name (or they are ignored with a warning), +and "local options," which apply to the next query on the command line. + +The ``@server`` option is a mandatory global option. It is the name or IP +address of the name server to query. (Unlike ``dig``, this value is not +retrieved from ``/etc/resolv.conf``.) It can be an IPv4 address in +dotted-decimal notation, an IPv6 address in colon-delimited notation, or +a hostname. When the supplied ``server`` argument is a hostname, +``mdig`` resolves that name before querying the name server. + +``mdig`` provides a number of query options which affect the way in +which lookups are made and the results displayed. Some of these set or +reset flag bits in the query header, some determine which sections of +the answer get printed, and others determine the timeout and retry +strategies. + +Each query option is identified by a keyword preceded by a plus sign +(``+``). Some keywords set or reset an option. These may be preceded by +the string ``no`` to negate the meaning of that keyword. Other keywords +assign values to options like the timeout interval. They have the form +``+keyword=value``. + +Anywhere Options +~~~~~~~~~~~~~~~~ + +``-f`` + This option makes ``mdig`` operate in batch mode by reading a list + of lookup requests to process from the file ``filename``. The file + contains a number of queries, one per line. Each entry in the file + should be organized in the same way they would be presented as queries + to ``mdig`` using the command-line interface. + +``-h`` + This option causes ``mdig`` to print detailed help information, with the full list + of options, and exit. + +``-v`` + This option causes ``mdig`` to print the version number and exit. + +Global Options +~~~~~~~~~~~~~~ + +``-4`` + This option forces ``mdig`` to only use IPv4 query transport. + +``-6`` + This option forces ``mdig`` to only use IPv6 query transport. + +``-b address`` + This option sets the source IP address of the query to + ``address``. This must be a valid address on one of the host's network + interfaces or "0.0.0.0" or "::". An optional port may be specified by + appending "#<port>" + +``-m`` + This option enables memory usage debugging. + +``-p port#`` + This option is used when a non-standard port number is to be + queried. ``port#`` is the port number that ``mdig`` sends its + queries to, instead of the standard DNS port number 53. This option is + used to test a name server that has been configured to listen for + queries on a non-standard port number. + +The global query options are: + +``+[no]additional`` + This option displays [or does not display] the additional section of a reply. The + default is to display it. + +``+[no]all`` + This option sets or clears all display flags. + +``+[no]answer`` + This option displays [or does not display] the answer section of a reply. The default + is to display it. + +``+[no]authority`` + This option displays [or does not display] the authority section of a reply. The + default is to display it. + +``+[no]besteffort`` + This option attempts to display [or does not display] the contents of messages which are malformed. The + default is to not display malformed answers. + +``+burst`` + This option delays queries until the start of the next second. + +``+[no]cl`` + This option displays [or does not display] the CLASS when printing the record. + +``+[no]comments`` + This option toggles the display of comment lines in the output. The default is to + print comments. + +``+[no]continue`` + This option toggles continuation on errors (e.g. timeouts). + +``+[no]crypto`` + This option toggles the display of cryptographic fields in DNSSEC records. The + contents of these fields are unnecessary to debug most DNSSEC + validation failures and removing them makes it easier to see the + common failures. The default is to display the fields. When omitted, + they are replaced by the string "[omitted]"; in the DNSKEY case, the + key ID is displayed as the replacement, e.g., ``[ key id = value ]``. + +``+dscp[=value]`` + This option sets the DSCP code point to be used when sending the query. Valid DSCP + code points are in the range [0...63]. By default no code point is + explicitly set. + +``+[no]multiline`` + This option toggles printing of records, like the SOA records, in a verbose multi-line format + with human-readable comments. The default is to print each record on + a single line, to facilitate machine parsing of the ``mdig`` output. + +``+[no]question`` + This option prints [or does not print] the question section of a query when an answer + is returned. The default is to print the question section as a + comment. + +``+[no]rrcomments`` + This option toggles the display of per-record comments in the output (for example, + human-readable key information about DNSKEY records). The default is + not to print record comments unless multiline mode is active. + +``+[no]short`` + This option provides [or does not provide] a terse answer. The default is to print the answer in a + verbose form. + +``+split=W`` + This option splits long hex- or base64-formatted fields in resource records into + chunks of ``W`` characters (where ``W`` is rounded up to the nearest + multiple of 4). ``+nosplit`` or ``+split=0`` causes fields not to be + split. The default is 56 characters, or 44 characters when + multiline mode is active. + +``+[no]tcp`` + This option uses [or does not use] TCP when querying name servers. The default behavior + is to use UDP. + +``+[no]ttlid`` + This option displays [or does not display] the TTL when printing the record. + +``+[no]ttlunits`` + This option displays [or does not display] the TTL in friendly human-readable time + units of "s", "m", "h", "d", and "w", representing seconds, minutes, + hours, days, and weeks. This implies +ttlid. + +``+[no]vc`` + This option uses [or does not use] TCP when querying name servers. This alternate + syntax to ``+[no]tcp`` is provided for backwards compatibility. The + ``vc`` stands for "virtual circuit". + +Local Options +~~~~~~~~~~~~~ + +``-c class`` + This option sets the query class to ``class``. It can be any valid + query class which is supported in BIND 9. The default query class is + "IN". + +``-t type`` + This option sets the query type to ``type``. It can be any valid + query type which is supported in BIND 9. The default query type is "A", + unless the ``-x`` option is supplied to indicate a reverse lookup with + the "PTR" query type. + +``-x addr`` + Reverse lookups - mapping addresses to names - are simplified by + this option. ``addr`` is an IPv4 address in dotted-decimal + notation, or a colon-delimited IPv6 address. ``mdig`` automatically + performs a lookup for a query name like ``11.12.13.10.in-addr.arpa`` and + sets the query type and class to PTR and IN respectively. By default, + IPv6 addresses are looked up using nibble format under the IP6.ARPA + domain. + +The local query options are: + +``+[no]aaflag`` + This is a synonym for ``+[no]aaonly``. + +``+[no]aaonly`` + This sets the ``aa`` flag in the query. + +``+[no]adflag`` + This sets [or does not set] the AD (authentic data) bit in the query. This + requests the server to return whether all of the answer and authority + sections have all been validated as secure, according to the security + policy of the server. AD=1 indicates that all records have been + validated as secure and the answer is not from a OPT-OUT range. AD=0 + indicates that some part of the answer was insecure or not validated. + This bit is set by default. + +``+bufsize=B`` + This sets the UDP message buffer size advertised using EDNS0 to ``B`` + bytes. The maximum and minimum sizes of this buffer are 65535 and 0 + respectively. Values outside this range are rounded up or down + appropriately. Values other than zero cause a EDNS query to be + sent. + +``+[no]cdflag`` + This sets [or does not set] the CD (checking disabled) bit in the query. This + requests the server to not perform DNSSEC validation of responses. + +``+[no]cookie=####`` + This sends [or does not send] a COOKIE EDNS option, with an optional value. Replaying a COOKIE + from a previous response allows the server to identify a previous + client. The default is ``+nocookie``. + +``+[no]dnssec`` + This requests that DNSSEC records be sent by setting the DNSSEC OK (DO) bit in + the OPT record in the additional section of the query. + +``+[no]edns[=#]`` + This specifies [or does not specify] the EDNS version to query with. Valid values are 0 to 255. + Setting the EDNS version causes an EDNS query to be sent. + ``+noedns`` clears the remembered EDNS version. EDNS is set to 0 by + default. + +``+[no]ednsflags[=#]`` + This sets the must-be-zero EDNS flag bits (Z bits) to the specified value. + Decimal, hex, and octal encodings are accepted. Setting a named flag + (e.g. DO) is silently ignored. By default, no Z bits are set. + +``+[no]ednsopt[=code[:value]]`` + This specifies [or does not specify] an EDNS option with code point ``code`` and an optional payload + of ``value`` as a hexadecimal string. ``+noednsopt`` clears the EDNS + options to be sent. + +``+[no]expire`` + This toggles sending of an EDNS Expire option. + +``+[no]nsid`` + This toggles inclusion of an EDNS name server ID request when sending a query. + +``+[no]recurse`` + This toggles the setting of the RD (recursion desired) bit in the query. + This bit is set by default, which means ``mdig`` normally sends + recursive queries. + +``+retry=T`` + This sets the number of times to retry UDP queries to server to ``T`` + instead of the default, 2. Unlike ``+tries``, this does not include + the initial query. + +``+[no]subnet=addr[/prefix-length]`` + This sends [or does not send] an EDNS Client Subnet option with the specified IP + address or network prefix. + +``mdig +subnet=0.0.0.0/0``, or simply ``mdig +subnet=0`` + This sends an EDNS client-subnet option with an empty address and a source + prefix-length of zero, which signals a resolver that the client's + address information must *not* be used when resolving this query. + +``+timeout=T`` + This sets the timeout for a query to ``T`` seconds. The default timeout is + 5 seconds for UDP transport and 10 for TCP. An attempt to set ``T`` + to less than 1 results in a query timeout of 1 second being + applied. + +``+tries=T`` + This sets the number of times to try UDP queries to server to ``T`` + instead of the default, 3. If ``T`` is less than or equal to zero, + the number of tries is silently rounded up to 1. + +``+udptimeout=T`` + This sets the timeout between UDP query retries to ``T``. + +``+[no]unknownformat`` + This prints [or does not print] all RDATA in unknown RR-type presentation format (see :rfc:`3597`). + The default is to print RDATA for known types in the type's + presentation format. + +``+[no]yaml`` + This toggles printing of the responses in a detailed YAML format. + +``+[no]zflag`` + This sets [or does not set] the last unassigned DNS header flag in a DNS query. + This flag is off by default. + +See Also +~~~~~~~~ + +:manpage:`dig(1)`, :rfc:`1035`. |