#!/bin/sh # Copyright (C) Internet Systems Consortium, Inc. ("ISC") # # SPDX-License-Identifier: MPL-2.0 # # This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, you can obtain one at https://mozilla.org/MPL/2.0/. # # See the COPYRIGHT file distributed with this work for additional # information regarding copyright ownership. SYSTEMTESTTOP=.. . $SYSTEMTESTTOP/conf.sh status=0 n=0 rm -f dig.out.* DIGOPTS="+tcp +noadd +nosea +nostat +nocmd -p ${PORT}" for conf in conf/good*.conf do echo_i "checking that $conf is accepted ($n)" ret=0 $CHECKCONF "$conf" || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` done for conf in conf/bad*.conf do echo_i "checking that $conf is rejected ($n)" ret=0 $CHECKCONF "$conf" >/dev/null && ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` done # Check the example. domain echo_i "checking non-excluded AAAA lookup works ($n)" ret=0 $DIG $DIGOPTS aaaa-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA lookup works ($n)" ret=0 $DIG $DIGOPTS excluded-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A lookup works ($n)" ret=0 $DIG $DIGOPTS excluded-bad-a.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A lookup works ($n)" ret=0 $DIG $DIGOPTS excluded-good-a.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::1.2.3.4" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking default exclude acl ignores mapped A records (all mapped) ($n)" ret=0 $DIG $DIGOPTS a-and-mapped.example. @10.53.0.2 -b 10.53.0.4 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:bbbb::1.2.3.5" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking default exclude acl ignores mapped A records (some mapped) ($n)" ret=0 $DIG $DIGOPTS a-and-aaaa-and-mapped.example. @10.53.0.2 -b 10.53.0.4 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::4" dig.out.ns2.test$n > /dev/null || ret=1 grep "::ffff:1.2.3.4" dig.out.ns2.test$n > /dev/null && ret=1 grep "::ffff:1.2.3.5" dig.out.ns2.test$n > /dev/null && ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking default exclude acl works with AAAA only ($n)" ret=0 $DIG $DIGOPTS aaaa-only.example. @10.53.0.2 -b 10.53.0.4 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking default exclude acl A only lookup works ($n)" ret=0 $DIG $DIGOPTS a-only.example. @10.53.0.2 -b 10.53.0.4 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:bbbb::102:305" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially excluded only AAAA lookup works ($n)" ret=0 $DIG $DIGOPTS partially-excluded-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially-excluded AAAA and non-mapped A lookup works ($n)" ret=0 $DIG $DIGOPTS partially-excluded-bad-a.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially-excluded only AAAA and mapped A lookup works ($n)" ret=0 $DIG $DIGOPTS partially-excluded-good-a.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only lookup works ($n)" ret=0 $DIG $DIGOPTS aaaa-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only lookup works ($n)" ret=0 $DIG $DIGOPTS a-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::102:305" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA lookup works ($n)" ret=0 $DIG $DIGOPTS a-and-aaaa.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A lookup works ($n)" ret=0 $DIG $DIGOPTS a-not-mapped.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA lookup works ($n)" ret=0 $DIG $DIGOPTS mx-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA lookup works ($n)" ret=0 $DIG $DIGOPTS non-existent.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-excluded AAAA via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-aaaa-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-bad-a.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-good-a.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::1.2.3.4" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-aaaa-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-a-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::102:305" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-a-and-aaaa.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-a-not-mapped.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME a-not-mapped.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-mx-only.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME mx-only.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA via CNAME lookup works ($n)" ret=0 $DIG $DIGOPTS cname-non-existent.example. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` # Check the example. domain recursive only echo_i "checking non-excluded AAAA lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS aaaa-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS excluded-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS excluded-bad-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS excluded-good-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:bbbb::1.2.3.4" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially excluded only AAAA lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS partially-excluded-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially-excluded AAAA and non-mapped A lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS partially-excluded-bad-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially-excluded only AAAA and mapped A lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS partially-excluded-good-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS aaaa-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS a-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:bbbb::102:305" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS a-and-aaaa.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS a-not-mapped.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS mx-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS non-existent.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-excluded AAAA via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-aaaa-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-excluded-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-excluded-bad-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-excluded-good-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:bbbb::102:304" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-aaaa-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-a-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:bbbb::102:305" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-a-and-aaaa.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-a-not-mapped.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME a-not-mapped.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-mx-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME mx-only.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA via CNAME lookup works, recursive only ($n)" ret=0 $DIG $DIGOPTS cname-non-existent.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` # Check the example. domain recursive only w/o recursion echo_i "checking non-excluded AAAA lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec aaaa-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec excluded-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec excluded-bad-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec excluded-good-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially excluded only AAAA lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec partially-excluded-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee:" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially-excluded AAAA and non-mapped A lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec partially-excluded-bad-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee:" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking partially-excluded only AAAA and mapped A lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec partially-excluded-good-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee:" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec aaaa-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec a-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec a-and-aaaa.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec a-not-mapped.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec mx-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec non-existent.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-excluded AAAA via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-aaaa-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-excluded-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-excluded-bad-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-excluded-good-a.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-aaaa-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-a-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME a-only.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-a-and-aaaa.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-a-not-mapped.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME a-not-mapped.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-mx-only.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME mx-only.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA via CNAME lookup works, recursive only +norec ($n)" ret=0 $DIG $DIGOPTS +norec cname-non-existent.example. @10.53.0.1 -b 10.53.0.1 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` # Check the example. domain from non client echo_i "checking non-excluded AAAA from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS aaaa-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS excluded-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS excluded-bad-a.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS excluded-good-a.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS aaaa-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS a-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS a-and-aaaa.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS a-not-mapped.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS mx-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS non-existent.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-excluded AAAA via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-aaaa-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-bad-a.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-good-a.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-aaaa-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-a-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-a-and-aaaa.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-a-not-mapped.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME a-not-mapped.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-mx-only.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME mx-only.example." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA via CNAME from non-client lookup works ($n)" ret=0 $DIG $DIGOPTS cname-non-existent.example. @10.53.0.2 -b 10.53.0.3 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` # Check the signed. domain echo_i "checking non-excluded AAAA lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS aaaa-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS excluded-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS excluded-bad-a.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS excluded-good-a.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::102:304" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS aaaa-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS a-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::102:305" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS a-and-aaaa.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS a-not-mapped.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS mx-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS non-existent.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-excluded AAAA via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-aaaa-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-bad-a.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-excluded-good-a.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::102:304" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-aaaa-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-a-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::102:305" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-a-and-aaaa.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-a-not-mapped.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME a-not-mapped.signed." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-mx-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME mx-only.signed." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA via CNAME lookup is signed zone works ($n)" ret=0 $DIG $DIGOPTS cname-non-existent.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` # Check the signed. domain echo_i "checking non-excluded AAAA lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec aaaa-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec excluded-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec excluded-bad-a.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec excluded-good-a.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec aaaa-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec a-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec a-and-aaaa.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec a-not-mapped.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec mx-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 0" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec non-existent.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-excluded AAAA via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-aaaa-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-excluded-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::3" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded AAAA and non-mapped A via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-excluded-bad-a.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking excluded only AAAA and mapped A via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-excluded-good-a.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:eeee::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking AAAA only via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-aaaa-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::2" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A only via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-a-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "2001:aaaa::102:305" dig.out.ns2.test$n > /dev/null && ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking A and AAAA via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-a-and-aaaa.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "2001::1" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-mapped A via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-a-not-mapped.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2" dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME a-not-mapped.signed." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking NODATA AAAA via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-mx-only.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 grep "CNAME mx-only.signed." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking non-existent AAAA via CNAME lookup is signed zone works with +dnssec ($n)" ret=0 $DIG $DIGOPTS +dnssec cname-non-existent.signed. @10.53.0.2 -b 10.53.0.2 aaaa > dig.out.ns2.test$n || ret=1 grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking reverse mapping ($n)" ret=0 $DIG $DIGOPTS -x 2001:aaaa::10.0.0.1 @10.53.0.2 > dig.out.ns2.test$n || ret=1 grep -i "CNAME.1.0.0.10.IN-ADDR.ARPA.$" dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` list=`$DIG $DIGOPTS -b 10.53.0.6 @10.53.0.2 +short aaaa a-only.example | sort` for a in $list do ret=0 echo_i "checking reverse mapping of $a ($n)" $DIG $DIGOPTS -x $a @10.53.0.2 > dig.out.ns2.test$n || ret=1 grep -i "CNAME.5.3.2.1.IN-ADDR.ARPA." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` done rev=`$ARPANAME 2001:aaaa::10.0.0.1` regex='..\(.*.IP6.ARPA\)' rev=`expr "${rev}" : "${regex}"` fin=`expr "${rev}" : "............${regex}"` while test "${rev}" != "${fin}" do ret=0 echo_i "checking $rev ($n)" $DIG $DIGOPTS $rev ptr @10.53.0.2 > dig.out.ns2.test$n || ret=1 grep -i "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep -i "ANSWER: 0," dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` rev=`expr "${rev}" : "${regex}"` done echo_i "checking dns64-server and dns64-contact ($n)" ret=0 $DIG $DIGOPTS soa 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.a.a.a.a.1.0.0.2.ip6.arpa @10.53.0.2 > dig.out.ns2.test$n || ret=1 grep "SOA.dns64.example.net..hostmaster.example.net." dig.out.ns2.test$n > /dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking TTL less than 600 from zone ($n)" ret=0 #expect 500 $DIG $DIGOPTS aaaa ttl-less-than-600.example +rec @10.53.0.1 > dig.out.ns1.test$n || ret=1 grep -i "ttl-less-than-600.example..500.IN.AAAA" dig.out.ns1.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking TTL more than 600 from zone ($n)" ret=0 #expect 700 $DIG $DIGOPTS aaaa ttl-more-than-600.example +rec @10.53.0.1 > dig.out.ns1.test$n || ret=1 grep -i "ttl-more-than-600.example..700.IN.AAAA" dig.out.ns1.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking TTL less than minimum from zone ($n)" ret=0 #expect 1100 $DIG $DIGOPTS aaaa ttl-less-than-minimum.example +rec @10.53.0.1 > dig.out.ns1.test$n || ret=1 grep -i "ttl-less-than-minimum.example..1100.IN.AAAA" dig.out.ns1.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking TTL limited to minimum from zone ($n)" ret=0 #expect 1200 $DIG $DIGOPTS aaaa ttl-more-than-minimum.example +rec @10.53.0.1 > dig.out.ns1.test$n || ret=1 grep -i "ttl-more-than-minimum.example..1200.IN.AAAA" dig.out.ns1.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking TTL less than 600 via cache ($n)" ret=0 #expect 500 $DIG $DIGOPTS aaaa ttl-less-than-600.example +rec -b 10.53.0.2 @10.53.0.2 > dig.out.ns1.test$n || ret=1 grep -i "ttl-less-than-600.example..500.IN.AAAA" dig.out.ns1.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking TTL more than 600 via cache ($n)" ret=0 #expect 700 $DIG $DIGOPTS aaaa ttl-more-than-600.example +rec -b 10.53.0.2 @10.53.0.2 > dig.out.ns2.test$n || ret=1 grep -i "ttl-more-than-600.example..700.IN.AAAA" dig.out.ns2.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking TTL less than minimum via cache ($n)" ret=0 #expect 1100 $DIG $DIGOPTS aaaa ttl-less-than-minimum.example +rec -b 10.53.0.2 @10.53.0.2 > dig.out.ns2.test$n || ret=1 grep -i "ttl-less-than-minimum.example..1100.IN.AAAA" dig.out.ns2.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking TTL limited to minimum via cache ($n)" ret=0 #expect 1200 $DIG $DIGOPTS aaaa ttl-more-than-minimum.example +rec -b 10.53.0.2 @10.53.0.2 > dig.out.ns2.test$n || ret=1 grep -i "ttl-more-than-minimum.example..1200.IN.AAAA" dig.out.ns2.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "checking synthesis of AAAA from RPZ-remapped A ($n)" ret=0 $DIG $DIGOPTS aaaa rpz.example +rec -b 10.53.0.7 @10.53.0.2 > dig.out.ns2.test$n || ret=1 grep -i 'rpz.example.*IN.AAAA.2001:96::a0a:a0a' dig.out.ns2.test$n >/dev/null || ret=1 n=`expr $n + 1` if [ $ret != 0 ]; then echo_i "failed"; fi status=`expr $status + $ret` echo_i "exit status: $status" [ $status -eq 0 ] || exit 1