#!/bin/sh # Copyright (C) Internet Systems Consortium, Inc. ("ISC") # # SPDX-License-Identifier: MPL-2.0 # # This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, you can obtain one at https://mozilla.org/MPL/2.0/. # # See the COPYRIGHT file distributed with this work for additional # information regarding copyright ownership. SYSTEMTESTTOP=.. . $SYSTEMTESTTOP/conf.sh DIGOPTS="+tcp +dnssec -p ${PORT}" RNDCCMD="$RNDC -c $SYSTEMTESTTOP/common/rndc.conf -p ${CONTROLPORT} -s" dig_with_opts() { $DIG $DIGOPTS "$@" } rndccmd() { $RNDCCMD "$@" } wait_for_serial() ( $DIG $DIGOPTS "@$1" "$2" SOA > "$4" serial=$(awk '$4 == "SOA" { print $7 }' "$4") [ "$3" -eq "${serial:--1}" ] ) status=0 n=0 $RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - nsec3 > /dev/null 2>&1 for i in 1 2 3 4 5 6 7 8 9 0 do nsec3param=$($DIG $DIGOPTS +nodnssec +short @10.53.0.3 nsec3param nsec3.) test "$nsec3param" = "1 0 0 -" && break sleep 1 done n=$((n + 1)) echo_i "checking that an unsupported algorithm is not used for signing ($n)" ret=0 grep -q "algorithm is unsupported" ns3/named.run || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that rrsigs are replaced with ksk only ($n)" ret=0 $DIG $DIGOPTS @10.53.0.3 axfr nsec3. | awk '/RRSIG NSEC3/ {a[$1]++} END { for (i in a) {if (a[i] != 1) exit (1)}}' || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that the zone is signed on initial transfer ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 do ret=0 $RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1 keys=$(grep '^Done signing' signing.out.test$n | wc -l) [ $keys = 2 ] || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking expired signatures are updated on load ($n)" ret=0 $DIG $DIGOPTS @10.53.0.3 +noall +answer +dnssec expired SOA > dig.out.ns3.test$n expiry=$(awk '$4 == "RRSIG" { print $9 }' dig.out.ns3.test$n) [ "$expiry" = "20110101000000" ] && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking removal of private type record via 'rndc signing -clear' ($n)" ret=0 $RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1 keys=$(sed -n -e 's/Done signing with key \(.*\)$/\1/p' signing.out.test$n) for key in $keys; do $RNDCCMD 10.53.0.3 signing -clear ${key} bits > /dev/null || ret=1 break; # We only want to remove 1 record for now. done 2>&1 |sed 's/^/ns3 /' | cat_i for i in 1 2 3 4 5 6 7 8 9 10 do ans=0 $RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1 num=$(grep "Done signing with" signing.out.test$n | wc -l) [ $num = 1 ] && break sleep 1 done [ $ans = 0 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking private type was properly signed ($n)" ret=0 $DIG $DIGOPTS @10.53.0.6 bits TYPE65534 > dig.out.ns6.test$n grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ret=1 grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking removal of remaining private type record via 'rndc signing -clear all' ($n)" ret=0 $RNDCCMD 10.53.0.3 signing -clear all bits > /dev/null || ret=1 for i in 1 2 3 4 5 6 7 8 9 10 do ans=0 $RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1 grep "No signing records found" signing.out.test$n > /dev/null || ans=1 [ $ans = 1 ] || break sleep 1 done [ $ans = 0 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking negative private type response was properly signed ($n)" ret=0 sleep 1 $DIG $DIGOPTS @10.53.0.6 bits TYPE65534 > dig.out.ns6.test$n grep "status: NOERROR" dig.out.ns6.test$n > /dev/null || ret=1 grep "ANSWER: 0," dig.out.ns6.test$n > /dev/null || ret=1 grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone bits server 10.53.0.2 ${PORT} update add added.bits 0 A 1.2.3.4 send EOF n=$((n + 1)) echo_i "checking that the record is added on the hidden primary ($n)" ret=0 $DIG $DIGOPTS @10.53.0.2 added.bits A > dig.out.ns2.test$n grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that update has been transferred and has been signed ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.3 added.bits A > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone bits server 10.53.0.2 ${PORT} update add bits 0 SOA ns2.bits. . 2011072400 20 20 1814400 3600 send EOF n=$((n + 1)) echo_i "checking YYYYMMDDVV (2011072400) serial on hidden primary ($n)" ret=0 $DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2011072400" dig.out.ns2.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking YYYYMMDDVV (2011072400) serial in signed zone ($n)" for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 grep "2011072400" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that the zone is signed on initial transfer, noixfr ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 do ret=0 $RNDCCMD 10.53.0.3 signing -list noixfr > signing.out.test$n 2>&1 keys=$(grep '^Done signing' signing.out.test$n | wc -l) [ $keys = 2 ] || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone noixfr server 10.53.0.4 ${PORT} update add added.noixfr 0 A 1.2.3.4 send EOF n=$((n + 1)) echo_i "checking that the record is added on the hidden primary, noixfr ($n)" ret=0 $DIG $DIGOPTS @10.53.0.4 added.noixfr A > dig.out.ns4.test$n grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that update has been transferred and has been signed, noixfr ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.3 added.noixfr A > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone noixfr server 10.53.0.4 ${PORT} update add noixfr 0 SOA ns4.noixfr. . 2011072400 20 20 1814400 3600 send EOF n=$((n + 1)) echo_i "checking YYYYMMDDVV (2011072400) serial on hidden primary, noixfr ($n)" ret=0 $DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1 grep "2011072400" dig.out.ns4.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking YYYYMMDDVV (2011072400) serial in signed zone, noixfr ($n)" for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 grep "2011072400" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that the primary zone signed on initial load ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $RNDCCMD 10.53.0.3 signing -list master > signing.out.test$n 2>&1 keys=$(grep '^Done signing' signing.out.test$n | wc -l) [ $keys = 2 ] || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking removal of private type record via 'rndc signing -clear' (primary) ($n)" ret=0 $RNDCCMD 10.53.0.3 signing -list master > signing.out.test$n 2>&1 keys=$(sed -n -e 's/Done signing with key \(.*\)$/\1/p' signing.out.test$n) for key in $keys; do $RNDCCMD 10.53.0.3 signing -clear ${key} master > /dev/null || ret=1 break; # We only want to remove 1 record for now. done 2>&1 |sed 's/^/ns3 /' | cat_i for i in 1 2 3 4 5 6 7 8 9 do ans=0 $RNDCCMD 10.53.0.3 signing -list master > signing.out.test$n 2>&1 num=$(grep "Done signing with" signing.out.test$n | wc -l) [ $num = 1 ] && break sleep 1 done [ $ans = 0 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking private type was properly signed (primary) ($n)" ret=0 $DIG $DIGOPTS @10.53.0.6 master TYPE65534 > dig.out.ns6.test$n grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ret=1 grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking removal of remaining private type record via 'rndc signing -clear' (primary) ($n)" ret=0 $RNDCCMD 10.53.0.3 signing -clear all master > /dev/null || ret=1 for i in 1 2 3 4 5 6 7 8 9 10 do ans=0 $RNDCCMD 10.53.0.3 signing -list master > signing.out.test$n 2>&1 grep "No signing records found" signing.out.test$n > /dev/null || ans=1 [ $ans = 1 ] || break sleep 1 done [ $ans = 0 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check adding of record to unsigned primary ($n)" ret=0 cp ns3/master2.db.in ns3/master.db rndc_reload ns3 10.53.0.3 master for i in 1 2 3 4 5 6 7 8 9 do ans=0 $DIG $DIGOPTS @10.53.0.3 e.master A > dig.out.ns3.test$n grep "10.0.0.5" dig.out.ns3.test$n > /dev/null || ans=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1 [ $ans = 1 ] || break sleep 1 done [ $ans = 0 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check adding record fails when SOA serial not changed ($n)" ret=0 echo "c A 10.0.0.3" >> ns3/master.db rndc_reload ns3 10.53.0.3 sleep 1 $DIG $DIGOPTS @10.53.0.3 c.master A > dig.out.ns3.test$n grep "NXDOMAIN" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check adding record works after updating SOA serial ($n)" ret=0 cp ns3/master3.db.in ns3/master.db $RNDCCMD 10.53.0.3 reload master 2>&1 | sed 's/^/ns3 /' | cat_i for i in 1 2 3 4 5 6 7 8 9 do ans=0 $DIG $DIGOPTS @10.53.0.3 c.master A > dig.out.ns3.test$n grep "10.0.0.3" dig.out.ns3.test$n > /dev/null || ans=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1 [ $ans = 1 ] || break sleep 1 done [ $ans = 0 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check the added record was properly signed ($n)" ret=0 $DIG $DIGOPTS @10.53.0.3 e.master A > dig.out.ns6.test$n grep "10.0.0.5" dig.out.ns6.test$n > /dev/null || ans=1 grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ans=1 grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ans=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that the dynamic primary zone signed on initial load ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $RNDCCMD 10.53.0.3 signing -list dynamic > signing.out.test$n 2>&1 keys=$(grep '^Done signing' signing.out.test$n | wc -l) [ $keys = 2 ] || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking primary zone that was updated while offline is correct ($n)" ret=0 $DIG $DIGOPTS +nodnssec +short @10.53.0.3 updated SOA >dig.out.ns2.soa.test$n serial=$(awk '{print $3}' dig.out.ns2.soa.test$n) # serial should have changed [ "$serial" = "2000042407" ] && ret=1 # e.updated should exist and should be signed $DIG $DIGOPTS @10.53.0.3 e.updated A > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 # updated.db.signed.jnl should exist, should have the source serial # of master2.db, and should show a minimal diff: no more than 8 added # records (SOA/RRSIG, 2 x NSEC/RRSIG, A/RRSIG), and 4 removed records # (SOA/RRSIG, NSEC/RRSIG). $JOURNALPRINT ns3/updated.db.signed.jnl >journalprint.out.test$n serial=$(awk '/Source serial =/ {print $4}' journalprint.out.test$n) [ "$serial" = "2000042408" ] || ret=1 diffsize=$(wc -l < journalprint.out.test$n) [ "$diffsize" -le 13 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking adding of record to unsigned primary using UPDATE ($n)" ret=0 [ -f ns3/dynamic.db.jnl ] && { ret=1 ; echo_i "journal exists (pretest)" ; } $NSUPDATE << EOF zone dynamic server 10.53.0.3 ${PORT} update add e.dynamic 0 A 1.2.3.4 send EOF [ -f ns3/dynamic.db.jnl ] || { ret=1 ; echo_i "journal does not exist (posttest)" ; } for i in 1 2 3 4 5 6 7 8 9 10 do ans=0 $DIG $DIGOPTS @10.53.0.3 e.dynamic > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1 grep "1.2.3.4" dig.out.ns3.test$n > /dev/null || ans=1 [ $ans = 0 ] && break sleep 1 done [ $ans = 0 ] || { ret=1; echo_i "signed record not found"; cat dig.out.ns3.test$n ; } if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "stop bump in the wire signer server ($n)" ret=0 stop_server ns3 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "restart bump in the wire signer server ($n)" ret=0 start_server --noclean --restart --port ${PORT} ns3 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone bits server 10.53.0.2 ${PORT} update add bits 0 SOA ns2.bits. . 2011072450 20 20 1814400 3600 send EOF n=$((n + 1)) echo_i "checking YYYYMMDDVV (2011072450) serial on hidden primary ($n)" ret=0 $DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2011072450" dig.out.ns2.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking YYYYMMDDVV (2011072450) serial in signed zone ($n)" for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 grep "2011072450" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone noixfr server 10.53.0.4 ${PORT} update add noixfr 0 SOA ns4.noixfr. . 2011072450 20 20 1814400 3600 send EOF n=$((n + 1)) echo_i "checking YYYYMMDDVV (2011072450) serial on hidden primary, noixfr ($n)" ret=0 $DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1 grep "2011072450" dig.out.ns4.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking YYYYMMDDVV (2011072450) serial in signed zone, noixfr ($n)" for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 grep "2011072450" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone bits server 10.53.0.3 ${PORT} update add bits 0 SOA ns2.bits. . 2011072460 20 20 1814400 3600 send EOF n=$((n + 1)) echo_i "checking forwarded update on hidden primary ($n)" ret=0 $DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 grep "2011072460" dig.out.ns2.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking forwarded update on signed zone ($n)" for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 grep "2011072460" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone noixfr server 10.53.0.3 ${PORT} update add noixfr 0 SOA ns4.noixfr. . 2011072460 20 20 1814400 3600 send EOF n=$((n + 1)) echo_i "checking forwarded update on hidden primary, noixfr ($n)" ret=0 $DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1 grep "2011072460" dig.out.ns4.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking forwarded update on signed zone, noixfr ($n)" for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 grep "2011072460" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) ret=0 n=$((n + 1)) echo_i "checking turning on of inline signing in a secondary zone via reload ($n)" $DIG $DIGOPTS @10.53.0.5 +dnssec bits SOA > dig.out.ns5.test$n grep "status: NOERROR" dig.out.ns5.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns5.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "setup broken"; fi status=$((status + ret)) copy_setports ns5/named.conf.post ns5/named.conf (cd ns5; $KEYGEN -q -a ${DEFAULT_ALGORITHM} bits) > /dev/null 2>&1 (cd ns5; $KEYGEN -q -a ${DEFAULT_ALGORITHM} -f KSK bits) > /dev/null 2>&1 rndc_reload ns5 10.53.0.5 for i in 1 2 3 4 5 6 7 8 9 10 do ret=0 $DIG $DIGOPTS @10.53.0.5 bits SOA > dig.out.ns5.test$n grep "status: NOERROR" dig.out.ns5.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns5.test$n > /dev/null || ret=1 if [ $ret = 0 ]; then break; fi sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking rndc freeze/thaw of dynamic inline zone no change ($n)" ret=0 $RNDCCMD 10.53.0.3 freeze dynamic > freeze.test$n 2>&1 || { echo_i "/' < freeze.test$n"; ret=1; } sleep 1 $RNDCCMD 10.53.0.3 thaw dynamic > thaw.test$n 2>&1 || { echo_i "rndc thaw dynamic failed" ; ret=1; } sleep 1 grep "zone dynamic/IN (unsigned): ixfr-from-differences: unchanged" ns3/named.run > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking rndc freeze/thaw of dynamic inline zone ($n)" ret=0 $RNDCCMD 10.53.0.3 freeze dynamic > freeze.test$n 2>&1 || ret=1 sleep 1 awk '$2 == ";" && $3 ~ /serial/ { printf("%d %s %s\n", $1 + 1, $2, $3); next; } { print; } END { print "freeze1.dynamic. 0 TXT freeze1"; } ' ns3/dynamic.db > ns3/dynamic.db.new mv ns3/dynamic.db.new ns3/dynamic.db $RNDCCMD 10.53.0.3 thaw dynamic > thaw.test$n 2>&1 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check added record freeze1.dynamic ($n)" for i in 1 2 3 4 5 6 7 8 9 do ret=0 $DIG $DIGOPTS @10.53.0.3 freeze1.dynamic TXT > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 test $ret = 0 && break sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) # allow 1 second so that file time stamps change sleep 1 n=$((n + 1)) echo_i "checking rndc freeze/thaw of server ($n)" ret=0 $RNDCCMD 10.53.0.3 freeze > freeze.test$n 2>&1 || ret=1 sleep 1 awk '$2 == ";" && $3 ~ /serial/ { printf("%d %s %s\n", $1 + 1, $2, $3); next; } { print; } END { print "freeze2.dynamic. 0 TXT freeze2"; } ' ns3/dynamic.db > ns3/dynamic.db.new mv ns3/dynamic.db.new ns3/dynamic.db $RNDCCMD 10.53.0.3 thaw > thaw.test$n 2>&1 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check added record freeze2.dynamic ($n)" for i in 1 2 3 4 5 6 7 8 9 do ret=0 $DIG $DIGOPTS @10.53.0.3 freeze2.dynamic TXT > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1 test $ret = 0 && break sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check rndc reload allows reuse of inline-signing zones ($n)" ret=0 { $RNDCCMD 10.53.0.3 reload 2>&1 || ret=1 ; } | sed 's/^/ns3 /' | cat_i grep "not reusable" ns3/named.run > /dev/null 2>&1 && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check rndc sync removes both signed and unsigned journals ($n)" ret=0 [ -f ns3/dynamic.db.jnl ] || ret=1 [ -f ns3/dynamic.db.signed.jnl ] || ret=1 $RNDCCMD 10.53.0.3 sync -clean dynamic 2>&1 || ret=1 [ -f ns3/dynamic.db.jnl ] && ret=1 [ -f ns3/dynamic.db.signed.jnl ] && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) $NSUPDATE << EOF zone retransfer server 10.53.0.2 ${PORT} update add added.retransfer 0 A 1.2.3.4 send EOF n=$((n + 1)) echo_i "checking that the retransfer record is added on the hidden primary ($n)" ret=0 $DIG $DIGOPTS @10.53.0.2 added.retransfer A > dig.out.ns2.test$n grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that the change has not been transferred due to notify ($n)" ret=0 for i in 0 1 2 3 4 5 6 7 8 9 do ans=0 $DIG $DIGOPTS @10.53.0.3 added.retransfer A > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1 [ $ans = 0 ] && break sleep 1 done if [ $ans != 1 ]; then echo_i "failed"; ret=1; fi status=$((status + ret)) n=$((n + 1)) echo_i "check rndc retransfer of a inline secondary zone works ($n)" ret=0 $RNDCCMD 10.53.0.3 retransfer retransfer 2>&1 || ret=1 for i in 0 1 2 3 4 5 6 7 8 9 do ans=0 $DIG $DIGOPTS @10.53.0.3 added.retransfer A > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1 [ $ans = 0 ] && break sleep 1 done [ $ans = 1 ] && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check 'rndc signing -nsec3param' requests are queued for zones which are not loaded ($n)" ret=0 # The "retransfer3" zone is configured with "allow-transfer { none; };" on ns2, # which means it should not yet be available on ns3. $DIG $DIGOPTS @10.53.0.3 retransfer3 SOA > dig.out.ns3.pre.test$n grep "status: SERVFAIL" dig.out.ns3.pre.test$n > /dev/null || ret=1 # Switch the zone to NSEC3. An "NSEC3 -> NSEC -> NSEC3" sequence is used purely # to test that multiple queued "rndc signing -nsec3param" requests are handled # properly. $RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1 $RNDCCMD 10.53.0.3 signing -nsec3param none retransfer3 > /dev/null 2>&1 || ret=1 $RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1 # Reconfigure ns2 to allow outgoing transfers for the "retransfer3" zone. sed "s|\(allow-transfer { none; };.*\)|// \1|;" ns2/named.conf > ns2/named.conf.new mv ns2/named.conf.new ns2/named.conf $RNDCCMD 10.53.0.2 reconfig || ret=1 # Request ns3 to retransfer the "retransfer3" zone. $RNDCCMD 10.53.0.3 retransfer retransfer3 || ret=1 # Check whether "retransfer3" uses NSEC3 as requested. for i in 0 1 2 3 4 5 6 7 8 9 do ret=0 $DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.post.test$n.$i grep "status: NXDOMAIN" dig.out.ns3.post.test$n.$i > /dev/null || ret=1 grep "NSEC3" dig.out.ns3.post.test$n.$i > /dev/null || ret=1 test $ret -eq 0 && break sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check rndc retransfer of a inline nsec3 secondary retains nsec3 ($n)" ret=0 $RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1 for i in 0 1 2 3 4 5 6 7 8 9 do ans=0 $DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.pre.test$n grep "status: NXDOMAIN" dig.out.ns3.pre.test$n > /dev/null || ans=1 grep "NSEC3" dig.out.ns3.pre.test$n > /dev/null || ans=1 [ $ans = 0 ] && break sleep 1 done $RNDCCMD 10.53.0.3 retransfer retransfer3 2>&1 || ret=1 for i in 0 1 2 3 4 5 6 7 8 9 do ans=0 $DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.post.test$n grep "status: NXDOMAIN" dig.out.ns3.post.test$n > /dev/null || ans=1 grep "NSEC3" dig.out.ns3.post.test$n > /dev/null || ans=1 [ $ans = 0 ] && break sleep 1 done [ $ans = 1 ] && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) # NOTE: The test below should be considered fragile. More details can be found # in the comment inside ns7/named.conf. n=$((n + 1)) echo_i "check rndc retransfer of a inline nsec3 secondary does not trigger an infinite loop ($n)" ret=0 zone=nsec3-loop # Add secondary zone using rndc $RNDCCMD 10.53.0.7 addzone $zone \ '{ type secondary; primaries { 10.53.0.2; }; file "'$zone'.db"; inline-signing yes; auto-dnssec maintain; };' # Wait until secondary zone is fully signed using NSEC for i in 1 2 3 4 5 6 7 8 9 0 do ret=1 $RNDCCMD 10.53.0.7 signing -list $zone > signing.out.test$n 2>&1 keys=$(grep '^Done signing' signing.out.test$n | wc -l) [ $keys -eq 3 ] && ret=0 && break sleep 1 done # Switch secondary zone to NSEC3 $RNDCCMD 10.53.0.7 signing -nsec3param 1 0 2 12345678 $zone > /dev/null 2>&1 # Wait until secondary zone is fully signed using NSEC3 for i in 1 2 3 4 5 6 7 8 9 0 do ret=1 nsec3param=$($DIG $DIGOPTS +nodnssec +short @10.53.0.7 nsec3param $zone) test "$nsec3param" = "1 0 2 12345678" && ret=0 && break sleep 1 done # Attempt to retransfer the secondary zone from primary $RNDCCMD 10.53.0.7 retransfer $zone # Check whether the signer managed to fully sign the retransferred zone by # waiting for a specific SOA serial number to appear in the logs; if this # specific SOA serial number does not appear in the logs, it means the signer # has either ran into an infinite loop or crashed; note that we check the logs # instead of sending SOA queries to the signer as these may influence its # behavior in a way which may prevent the desired scenario from being # reproduced (see comment in ns7/named.conf) for i in 1 2 3 4 5 6 7 8 9 0 do ret=1 grep "ns2.$zone. . 10 20 20 1814400 3600" ns7/named.run > /dev/null 2>&1 [ $? -eq 0 ] && ret=0 && break sleep 1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "stop bump in the wire signer server ($n)" ret=0 stop_server ns3 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) echo_i "update SOA record while stopped" cp ns3/master4.db.in ns3/master.db rm ns3/master.db.jnl n=$((n + 1)) echo_i "restart bump in the wire signer server ($n)" ret=0 start_server --noclean --restart --port ${PORT} ns3 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "updates to SOA parameters other than serial while stopped are reflected in signed zone ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 do ans=0 $DIG $DIGOPTS @10.53.0.3 master SOA > dig.out.ns3.test$n grep "hostmaster" dig.out.ns3.test$n > /dev/null || ans=1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1 [ $ans = 1 ] || break sleep 1 done [ $ans = 0 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check that reloading all zones does not cause zone maintenance to cease for inline-signed zones ($n)" ret=1 # Ensure "rndc reload" attempts to load ns3/master.db by waiting 1 second so # that the file modification time has no possibility of being equal to # the one stored during server startup. sleep 1 nextpart ns3/named.run > /dev/null cp ns3/master5.db.in ns3/master.db rndc_reload ns3 10.53.0.3 for i in 1 2 3 4 5 6 7 8 9 10 do if nextpart ns3/named.run | grep "zone master.*sending notifies" > /dev/null; then ret=0 break fi sleep 1 done # Sanity check: file updates should be reflected in the signed zone, # i.e. SOA RNAME should no longer be set to "hostmaster". $DIG $DIGOPTS @10.53.0.3 master SOA > dig.out.ns3.test$n || ret=1 grep "hostmaster" dig.out.ns3.test$n > /dev/null && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check that reloading errors prevent synchronization ($n)" ret=1 $DIG $DIGOPTS +short @10.53.0.3 master SOA > dig.out.ns3.test$n.1 || ret=1 sleep 1 nextpart ns3/named.run > /dev/null cp ns3/master6.db.in ns3/master.db rndc_reload ns3 10.53.0.3 for i in 1 2 3 4 5 6 7 8 9 10 do if nextpart ns3/named.run | grep "not loaded due to errors" > /dev/null then ret=0 break fi sleep 1 done # Sanity check: the SOA record should be unchanged $DIG $DIGOPTS +short @10.53.0.3 master SOA > dig.out.ns3.test$n.2 || ret=1 $DIFF dig.out.ns3.test$n.1 dig.out.ns3.test$n.2 > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check inline-signing with an include file ($n)" ret=0 $DIG $DIGOPTS +short @10.53.0.3 master SOA > dig.out.ns3.test$n.1 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) sleep 1 nextpart ns3/named.run > /dev/null cp ns3/master7.db.in ns3/master.db rndc_reload ns3 10.53.0.3 _includefile_loaded() { $DIG $DIGOPTS @10.53.0.3 f.master A > dig.out.ns3.test$n grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || return 1 grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || return 1 grep "10\.0\.0\.7" dig.out.ns3.test$n > /dev/null || return 1 return 0 } retry_quiet 10 _includefile_loaded # Sanity check: the SOA record should be changed $DIG $DIGOPTS +short @10.53.0.3 master SOA > dig.out.ns3.test$n.2 || ret=1 $DIFF dig.out.ns3.test$n.1 dig.out.ns3.test$n.2 > /dev/null && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "test add/del zone combinations ($n)" ret=0 for zone in a b c d e f g h i j k l m n o p q r s t u v w x y z do $RNDCCMD 10.53.0.2 addzone test-$zone \ '{ type primary; file "bits.db.in"; allow-transfer { any; }; };' $DIG $DIGOPTS @10.53.0.2 test-$zone SOA > dig.out.ns2.$zone.test$n grep "status: NOERROR," dig.out.ns2.$zone.test$n > /dev/null || { ret=1; cat dig.out.ns2.$zone.test$n; } $RNDCCMD 10.53.0.3 addzone test-$zone \ '{ type secondary; primaries { 10.53.0.2; }; file "'test-$zone.bk'"; inline-signing yes; auto-dnssec maintain; allow-transfer { any; }; };' $RNDCCMD 10.53.0.3 delzone test-$zone > /dev/null 2>&1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing adding external keys to a inline zone ($n)" ret=0 $DIG $DIGOPTS @10.53.0.3 dnskey externalkey > dig.out.ns3.test$n for alg in ${DEFAULT_ALGORITHM_NUMBER} ${ALTERNATIVE_ALGORITHM_NUMBER} do [ $alg = 13 -a ! -f checkecdsa ] && continue; case $alg in 7) echo_i "checking NSEC3RSASHA1";; 8) echo_i "checking RSASHA256";; 13) echo_i "checking ECDSAP256SHA256";; *) echo_i "checking $alg";; esac dnskeys=$(grep "IN.DNSKEY.25[67] [0-9]* $alg " dig.out.ns3.test$n | wc -l) rrsigs=$(grep "RRSIG.DNSKEY $alg " dig.out.ns3.test$n | wc -l) test ${dnskeys:-0} -eq 3 || { echo_i "failed $alg (dnskeys ${dnskeys:-0})"; ret=1; } test ${rrsigs:-0} -eq 2 || { echo_i "failed $alg (rrsigs ${rrsigs:-0})"; ret=1; } done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing imported key won't overwrite a private key ($n)" ret=0 key=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} import.example) cp ${key}.key import.key # import should fail $IMPORTKEY -f import.key import.example > /dev/null 2>&1 && ret=1 rm -f ${key}.private # private key removed; import should now succeed $IMPORTKEY -f import.key import.example > /dev/null 2>&1 || ret=1 # now that it's an external key, re-import should succeed $IMPORTKEY -f import.key import.example > /dev/null 2>&1 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing updating inline secure serial via 'rndc signing -serial' ($n)" ret=0 $DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n) $RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1 retry_quiet 5 wait_for_serial 10.53.0.3 nsec3. "${newserial:-0}" dig.out.ns3.post.test$n || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing updating inline secure serial via 'rndc signing -serial' with negative change ($n)" ret=0 $DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n oldserial=$(awk '$4 == "SOA" { print $7 }' dig.out.n3.pre.test$n) newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] - 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n) $RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1 sleep 1 $DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.ns3.post.test$n serial=$(awk '$4 == "SOA" { print $7 }' dig.out.ns3.post.test$n) [ ${oldserial:-0} -eq ${serial:-1} ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) # # Freezing only operates on the raw zone. # n=$((n + 1)) echo_i "testing updating inline secure serial via 'rndc signing -serial' when frozen ($n)" ret=0 $DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n oldserial=$(awk '$4 == "SOA" { print $7 }' dig.out.n3.pre.test$n) newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n) $RNDCCMD 10.53.0.3 freeze nsec3 > /dev/null 2>&1 $RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1 $RNDCCMD 10.53.0.3 thaw nsec3 > /dev/null 2>&1 retry_quiet 5 wait_for_serial 10.53.0.3 nsec3. "${newserial:-0}" dig.out.ns3.post1.test$n || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing updating dynamic serial via 'rndc signing -serial' ($n)" ret=0 $DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n) $RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1 retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${newserial:-0}" dig.out.ns2.post.test$n || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing updating dynamic serial via 'rndc signing -serial' with negative change ($n)" ret=0 $DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n oldserial=$(awk '$4 == "SOA" { print $7 }' dig.out.ns2.pre.test$n) newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] - 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n) $RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1 retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${newserial:-1}" dig.out.ns2.post1.test$n && ret=1 retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${oldserial:-1}" dig.out.ns2.post2.test$n || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing updating dynamic serial via 'rndc signing -serial' when frozen ($n)" ret=0 $DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n oldserial=$(awk '$4 == "SOA" { print $7 }' dig.out.ns2.pre.test$n) newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n) $RNDCCMD 10.53.0.2 freeze bits > /dev/null 2>&1 $RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1 $RNDCCMD 10.53.0.2 thaw bits > /dev/null 2>&1 retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${newserial:-1}" dig.out.ns2.post1.test$n && ret=1 retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${oldserial:-1}" dig.out.ns2.post2.test$n || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing that inline signing works with inactive ZSK and active KSK ($n)" ret=0 $DIG $DIGOPTS @10.53.0.3 soa inactivezsk > dig.out.ns3.pre.test$n || ret=1 soa1=$(awk '$4 == "SOA" { print $7 }' dig.out.ns3.pre.test$n) $NSUPDATE << EOF server 10.53.0.2 ${PORT} update add added.inactivezsk 0 IN TXT added record send EOF for i in 1 2 3 4 5 6 7 8 9 10 do $DIG $DIGOPTS @10.53.0.3 soa inactivezsk > dig.out.ns3.post.test$n || ret=1 soa2=$(awk '$4 == "SOA" { print $7 }' dig.out.ns3.post.test$n) test ${soa1:-0} -ne ${soa2:-0} && break sleep 1 done test ${soa1:-0} -ne ${soa2:-0} || ret=1 $DIG $DIGOPTS @10.53.0.3 txt added.inactivezsk > dig.out.ns3.test$n || ret=1 grep "ANSWER: 3," dig.out.ns3.test$n > /dev/null || ret=1 grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1 grep "TXT ${DEFAULT_ALGORITHM_NUMBER} 2" dig.out.ns3.test$n > /dev/null || ret=1 grep "TXT ${ALTERNATIVE_ALGORITHM_NUMBER} 2" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "testing that inline signing works with inactive KSK and active ZSK ($n)" ret=0 $DIG $DIGOPTS @10.53.0.3 axfr inactiveksk > dig.out.ns3.test$n # # check that DNSKEY is signed with ZSK for default algorithm # awk='$4 == "DNSKEY" && $5 == 256 && $7 == alg { print }' zskid=$(awk -v alg=${DEFAULT_ALGORITHM_NUMBER} "${awk}" dig.out.ns3.test$n | $DSFROMKEY -A -2 -f - inactiveksk | awk '{ print $4}' ) grep "DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 1 [0-9]* [0-9]* [0-9]* ${zskid} " dig.out.ns3.test$n > /dev/null || ret=1 awk='$4 == "DNSKEY" && $5 == 257 && $7 == alg { print }' kskid=$(awk -v alg=${DEFAULT_ALGORITHM_NUMBER} "${awk}" dig.out.ns3.test$n | $DSFROMKEY -2 -f - inactiveksk | awk '{ print $4}' ) grep "DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 1 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null && ret=1 # # check that DNSKEY is signed with KSK for alternative algorithm # awk='$4 == "DNSKEY" && $5 == 256 && $7 == alg { print }' zskid=$(awk -v alg=${ALTERNATIVE_ALGORITHM_NUMBER} "${awk}" dig.out.ns3.test$n | $DSFROMKEY -A -2 -f - inactiveksk | awk '{ print $4}' ) grep "DNSKEY ${ALTERNATIVE_ALGORITHM_NUMBER} 1 [0-9]* [0-9]* [0-9]* ${zskid} " dig.out.ns3.test$n > /dev/null && ret=1 awk='$4 == "DNSKEY" && $5 == 257 && $7 == alg { print }' kskid=$(awk -v alg=${ALTERNATIVE_ALGORITHM_NUMBER} "${awk}" dig.out.ns3.test$n | $DSFROMKEY -2 -f - inactiveksk | awk '{ print $4}' ) grep "DNSKEY ${ALTERNATIVE_ALGORITHM_NUMBER} 1 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) # Wait until an update to the raw part of a given inline signed zone is fully # processed. As waiting for a fixed amount of time is suboptimal and there is # no single message that would signify both a successful modification and an # error in a race-free manner, instead wait until either notifies are sent # (which means the secure zone was modified) or a receive_secure_serial() error # is logged (which means the zone was not modified and will not be modified any # further in response to the relevant raw zone update). wait_until_raw_zone_update_is_processed() { zone="$1" for i in 1 2 3 4 5 6 7 8 9 10 do if nextpart ns3/named.run | grep -E "zone ${zone}.*(sending notifies|receive_secure_serial)" > /dev/null; then return fi sleep 1 done } n=$((n + 1)) echo_i "checking that changes to raw zone are applied to a previously unsigned secure zone ($n)" ret=0 # Query for bar.nokeys/A and ensure the response is negative. As this zone # does not have any signing keys set up, the response must be unsigned. $DIG $DIGOPTS @10.53.0.3 bar.nokeys. A > dig.out.ns3.pre.test$n 2>&1 || ret=1 grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1 grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null && ret=1 # Ensure the wait_until_raw_zone_update_is_processed() call below will ignore # log messages generated before the raw zone is updated. nextpart ns3/named.run > /dev/null # Add a record to the raw zone on the primary. $NSUPDATE << EOF || ret=1 zone nokeys. server 10.53.0.2 ${PORT} update add bar.nokeys. 0 A 127.0.0.1 send EOF wait_until_raw_zone_update_is_processed "nokeys" # Query for bar.nokeys/A again and ensure the signer now returns a positive, # yet still unsigned response. $DIG $DIGOPTS @10.53.0.3 bar.nokeys. A > dig.out.ns3.post.test$n 2>&1 grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null || ret=1 grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that changes to raw zone are not applied to a previously signed secure zone with no keys available (primary) ($n)" ret=0 # Query for bar.removedkeys-primary/A and ensure the response is negative. As # this zone has signing keys set up, the response must be signed. $DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.pre.test$n 2>&1 || ret=1 grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1 grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1 # Remove the signing keys for this zone. mv -f ns3/Kremovedkeys-primary* ns3/removedkeys # Ensure the wait_until_raw_zone_update_is_processed() call below will ignore # log messages generated before the raw zone is updated. nextpart ns3/named.run > /dev/null # Add a record to the raw zone on the primary. $NSUPDATE << EOF || ret=1 zone removedkeys-primary. server 10.53.0.3 ${PORT} update add bar.removedkeys-primary. 0 A 127.0.0.1 send EOF wait_until_raw_zone_update_is_processed "removedkeys-primary" # Query for bar.removedkeys-primary/A again and ensure the signer still returns # a negative, signed response. $DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.post.test$n 2>&1 grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null && ret=1 grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that backlogged changes to raw zone are applied after keys become available (primary) ($n)" ret=0 # Restore the signing keys for this zone. mv ns3/removedkeys/Kremovedkeys-primary* ns3 $RNDCCMD 10.53.0.3 loadkeys removedkeys-primary > /dev/null 2>&1 # Determine what a SOA record with a bumped serial number should look like. BUMPED_SOA=$(sed -n 's/.*\(add removedkeys-primary.*IN.*SOA\)/\1/p;' ns3/named.run | tail -1 | awk '{$8 += 1; print $0}') # Ensure the wait_until_raw_zone_update_is_processed() call below will ignore # log messages generated before the raw zone is updated. nextpart ns3/named.run > /dev/null # Bump the SOA serial number of the raw zone. $NSUPDATE << EOF || ret=1 zone removedkeys-primary. server 10.53.0.3 ${PORT} update del removedkeys-primary. SOA update ${BUMPED_SOA} send EOF wait_until_raw_zone_update_is_processed "removedkeys-primary" # Query for bar.removedkeys-primary/A again and ensure the signer now returns a # positive, signed response. $DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.test$n 2>&1 grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that changes to raw zone are not applied to a previously signed secure zone with no keys available (secondary) ($n)" ret=0 # Query for bar.removedkeys-secondary/A and ensure the response is negative. As this # zone does have signing keys set up, the response must be signed. $DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.pre.test$n 2>&1 || ret=1 grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1 grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1 # Remove the signing keys for this zone. mv -f ns3/Kremovedkeys-secondary* ns3/removedkeys # Ensure the wait_until_raw_zone_update_is_processed() call below will ignore # log messages generated before the raw zone is updated. nextpart ns3/named.run > /dev/null # Add a record to the raw zone on the primary. $NSUPDATE << EOF || ret=1 zone removedkeys-secondary. server 10.53.0.2 ${PORT} update add bar.removedkeys-secondary. 0 A 127.0.0.1 send EOF wait_until_raw_zone_update_is_processed "removedkeys-secondary" # Query for bar.removedkeys-secondary/A again and ensure the signer still returns a # negative, signed response. $DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.post.test$n 2>&1 grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null && ret=1 grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking that backlogged changes to raw zone are applied after keys become available (secondary) ($n)" ret=0 # Restore the signing keys for this zone. mv ns3/removedkeys/Kremovedkeys-secondary* ns3 $RNDCCMD 10.53.0.3 loadkeys removedkeys-secondary > /dev/null 2>&1 # Determine what a SOA record with a bumped serial number should look like. BUMPED_SOA=$(sed -n 's/.*\(add removedkeys-secondary.*IN.*SOA\)/\1/p;' ns2/named.run | tail -1 | awk '{$8 += 1; print $0}') # Ensure the wait_until_raw_zone_update_is_processed() call below will ignore # log messages generated before the raw zone is updated. nextpart ns3/named.run > /dev/null # Bump the SOA serial number of the raw zone on the primary. $NSUPDATE << EOF || ret=1 zone removedkeys-secondary. server 10.53.0.2 ${PORT} update del removedkeys-secondary. SOA update ${BUMPED_SOA} send EOF wait_until_raw_zone_update_is_processed "removedkeys-secondary" # Query for bar.removedkeys-secondary/A again and ensure the signer now returns # a positive, signed response. $DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.test$n 2>&1 grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) # Check that the file $2 for zone $1 does not contain RRSIG records # while the journal file for that zone does contain them. ensure_sigs_only_in_journal() { origin="$1" masterfile="$2" $CHECKZONE -i none -f raw -D -o - "$origin" "$masterfile" 2>&1 | grep -w RRSIG > /dev/null && ret=1 $CHECKZONE -j -i none -f raw -D -o - "$origin" "$masterfile" 2>&1 | grep -w RRSIG > /dev/null || ret=1 } n=$((n + 1)) echo_i "checking that records added from a journal are scheduled to be resigned ($n)" ret=0 # Signing keys for the "delayedkeys" zone are not yet accessible. Thus, the # zone file for the signed version of the zone will contain no DNSSEC records. # Move keys into place now and load them, which will cause DNSSEC records to # only be present in the journal for the signed version of the zone. mv Kdelayedkeys* ns3/ $RNDCCMD 10.53.0.3 loadkeys delayedkeys > rndc.out.ns3.pre.test$n 2>&1 || ret=1 # Wait until the zone is signed. check_done_signing () ( $RNDCCMD 10.53.0.3 signing -list delayedkeys > signing.out.test$n 2>&1 num=$(grep "Done signing with" signing.out.test$n | wc -l) [ $num -eq 2 ] ) retry_quiet 10 check_done_signing || ret=1 # Halt rather than stopping the server to prevent the file from being # flushed upon shutdown since we specifically want to avoid it. stop_server --use-rndc --halt --port ${CONTROLPORT} ns3 ensure_sigs_only_in_journal delayedkeys ns3/delayedkeys.db.signed start_server --noclean --restart --port ${PORT} ns3 # At this point, the raw zone journal will not have a source serial set. Upon # server startup, receive_secure_serial() will rectify that, update SOA, resign # it, and schedule its future resign. This will cause "rndc zonestatus" to # return delayedkeys/SOA as the next node to resign, so we restart the server # once again; with the raw zone journal now having a source serial set, # receive_secure_serial() should refrain from introducing any zone changes. stop_server --use-rndc --halt --port ${CONTROLPORT} ns3 ensure_sigs_only_in_journal delayedkeys ns3/delayedkeys.db.signed nextpart ns3/named.run > /dev/null start_server --noclean --restart --port ${PORT} ns3 # We can now test whether the secure zone journal was correctly processed: # unless the records contained in it were scheduled for resigning, no resigning # event will be scheduled at all since the secure zone file contains no # DNSSEC records. wait_for_log 20 "all zones loaded" ns3/named.run || ret=1 $RNDCCMD 10.53.0.3 zonestatus delayedkeys > rndc.out.ns3.post.test$n 2>&1 || ret=1 grep "next resign node:" rndc.out.ns3.post.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check that zonestatus reports 'type: primary' for an inline primary zone ($n)" ret=0 $RNDCCMD 10.53.0.3 zonestatus master > rndc.out.ns3.test$n grep "type: primary" rndc.out.ns3.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "check that zonestatus reports 'type: secondary' for an inline secondary zone ($n)" ret=0 $RNDCCMD 10.53.0.3 zonestatus bits > rndc.out.ns3.test$n grep "type: secondary" rndc.out.ns3.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking reload of touched inline zones ($n)" ret=0 echo_ic "pre-reload 'next key event'" nextpart ns8/named.run > nextpart.pre$n.out count=$(grep "zone example[0-9][0-9].com/IN (signed): next key event:" nextpart.pre$n.out | wc -l) echo_ic "found: $count/16" [ $count -eq 16 ] || ret=1 echo_ic "touch and reload" touch ns8/example??.com.db $RNDCCMD 10.53.0.8 reload 2>&1 | sed 's/^/ns3 /' | cat_i sleep 5 echo_ic "post-reload 'next key event'" nextpart ns8/named.run > nextpart.post$n.out count=$(grep "zone example[0-9][0-9].com/IN (signed): next key event:" nextpart.post$n.out | wc -l) echo_ic "found: $count/16" [ $count -eq 16 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n + 1)) echo_i "checking second reload of touched inline zones ($n)" ret=0 nextpart ns8/named.run > nextpart.pre$n.out $RNDCCMD 10.53.0.8 reload 2>&1 | sed 's/^/ns3 /' | cat_i sleep 5 nextpart ns8/named.run > nextpart.post$n.out grep "ixfr-from-differences: unchanged" nextpart.post$n.out && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status + ret)) n=$((n+1)) echo_i "Check that 'rndc reload' of just the serial updates the signed instance ($n)" ret=0 dig_with_opts @10.53.0.8 example SOA > dig.out.ns8.test$n.soa1 || ret=1 cp ns8/example2.db.in ns8/example.db || ret=1 nextpart ns8/named.run > /dev/null rndccmd 10.53.0.8 reload || ret=1 wait_for_log 3 "all zones loaded" ns8/named.run sleep 1 dig_with_opts @10.53.0.8 example SOA > dig.out.ns8.test$n.soa2 || ret=1 soa1=$(awk '$4 == "SOA" { print $7 }' dig.out.ns8.test$n.soa1) soa2=$(awk '$4 == "SOA" { print $7 }' dig.out.ns8.test$n.soa2) ttl1=$(awk '$4 == "SOA" { print $2 }' dig.out.ns8.test$n.soa1) ttl2=$(awk '$4 == "SOA" { print $2 }' dig.out.ns8.test$n.soa2) test ${soa1:-1000} -lt ${soa2:-0} || ret=1 test ${ttl1:-0} -eq 300 || ret=1 test ${ttl2:-0} -eq 300 || ret=1 test "$ret" -eq 0 || echo_i "failed" status=$((status+ret)) n=$((n+1)) echo_i "Check that restart with zone changes and deleted journal works ($n)" TSIG= ret=0 dig_with_opts @10.53.0.8 example SOA > dig.out.ns8.test$n.soa1 || ret=1 stop_server --use-rndc --port ${CONTROLPORT} ns8 # TTL of all records change from 300 to 400 cp ns8/example3.db.in ns8/example.db || ret=1 rm ns8/example.db.jnl nextpart ns8/named.run > /dev/null start_server --noclean --restart --port ${PORT} ns8 wait_for_log 3 "all zones loaded" ns8/named.run sleep 1 dig_with_opts @10.53.0.8 example SOA > dig.out.ns8.test$n.soa2 || ret=1 soa1=$(awk '$4 == "SOA" { print $7 }' dig.out.ns8.test$n.soa1) soa2=$(awk '$4 == "SOA" { print $7 }' dig.out.ns8.test$n.soa2) ttl1=$(awk '$4 == "SOA" { print $2 }' dig.out.ns8.test$n.soa1) ttl2=$(awk '$4 == "SOA" { print $2 }' dig.out.ns8.test$n.soa2) test ${soa1:-1000} -lt ${soa2:-0} || ret=1 test ${ttl1:-0} -eq 300 || ret=1 test ${ttl2:-0} -eq 400 || ret=1 test "$ret" -eq 0 || echo_i "failed" status=$((status+ret)) echo_i "exit status: $status" [ $status -eq 0 ] || exit 1