#!/bin/sh

# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
#
# SPDX-License-Identifier: MPL-2.0
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0.  If a copy of the MPL was not distributed with this
# file, you can obtain one at https://mozilla.org/MPL/2.0/.
#
# See the COPYRIGHT file distributed with this work for additional
# information regarding copyright ownership.

SYSTEMTESTTOP=..
. $SYSTEMTESTTOP/conf.sh

DIGOPTS="-p ${PORT}"

status=0
n=0

ns3_reset() {
	copy_setports $1 ns3/named.conf
	$RNDC -c ../common/rndc.conf -s 10.53.0.3 -p ${CONTROLPORT} reconfig 2>&1 | sed 's/^/I:ns3 /'
	$RNDC -c ../common/rndc.conf -s 10.53.0.3 -p ${CONTROLPORT} flush | sed 's/^/I:ns3 /'
}

ns3_sends_aaaa_queries() {
	if grep "started AAAA fetch" ns3/named.run >/dev/null; then
		return 0
	else
		return 1
	fi
}

# Check whether the number of queries ans2 received from ns3 (this value is
# read from dig output stored in file $1) is as expected.  The expected query
# count is variable:
#   - if ns3 sends AAAA queries, the query count should equal $2,
#   - if ns3 does not send AAAA queries, the query count should equal $3.
check_query_count() {
	count1=`sed 's/[^0-9]//g;' $1`
	count2=`sed 's/[^0-9]//g;' $2`
	count=`expr $count1 + $count2`
	#echo_i "count1=$count1 count2=$count2 count=$count"
	expected_count_with_aaaa=$3
	expected_count_without_aaaa=$4

	if ns3_sends_aaaa_queries; then
		expected_count=$expected_count_with_aaaa
	else
		expected_count=$expected_count_without_aaaa
	fi

	if [ $count -ne $expected_count ]; then
		echo_i "count $count (actual) != $expected_count (expected)"
		ret=1
	fi
}

echo_i "set max-recursion-depth=12"

n=`expr $n + 1`
echo_i "attempt excessive-depth lookup ($n)"
ret=0
echo "1000" > ans2/ans.limit
echo "1000" > ans4/ans.limit
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.4 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.3 indirect1.example.org > dig.out.1.test$n || ret=1
grep "status: SERVFAIL" dig.out.1.test$n > /dev/null || ret=1
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
$DIG $DIGOPTS +short @10.53.0.4 count txt > dig.out.4.test$n || ret=1
check_query_count dig.out.2.test$n dig.out.4.test$n 27 14
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

n=`expr $n + 1`
echo_i "attempt permissible lookup ($n)"
ret=0
echo "12" > ans2/ans.limit
echo "12" > ans4/ans.limit
ns3_reset ns3/named1.conf.in
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.4 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.3 indirect2.example.org > dig.out.1.test$n || ret=1
grep "status: NOERROR" dig.out.1.test$n > /dev/null || ret=1
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
$DIG $DIGOPTS +short @10.53.0.4 count txt > dig.out.4.test$n || ret=1
check_query_count dig.out.2.test$n dig.out.4.test$n 50 26
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

echo_i "set max-recursion-depth=5"

n=`expr $n + 1`
echo_i "attempt excessive-depth lookup ($n)"
ret=0
echo "12" > ans2/ans.limit
ns3_reset ns3/named2.conf.in
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.4 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.3 indirect3.example.org > dig.out.1.test$n || ret=1
grep "status: SERVFAIL" dig.out.1.test$n > /dev/null || ret=1
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
$DIG $DIGOPTS +short @10.53.0.4 count txt > dig.out.4.test$n || ret=1
check_query_count dig.out.2.test$n dig.out.4.test$n 13 7
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

n=`expr $n + 1`
echo_i "attempt permissible lookup ($n)"
ret=0
echo "5" > ans2/ans.limit
echo "5" > ans4/ans.limit
ns3_reset ns3/named2.conf.in
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.4 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.3 indirect4.example.org > dig.out.1.test$n || ret=1
grep "status: NOERROR" dig.out.1.test$n > /dev/null || ret=1
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
$DIG $DIGOPTS +short @10.53.0.4 count txt > dig.out.4.test$n || ret=1
check_query_count dig.out.2.test$n dig.out.4.test$n 22 12
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

echo_i "set max-recursion-depth=100, max-recursion-queries=50"

n=`expr $n + 1`
echo_i "attempt excessive-queries lookup ($n)"
ret=0
echo "13" > ans2/ans.limit
echo "13" > ans4/ans.limit
ns3_reset ns3/named3.conf.in
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.4 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.3 indirect5.example.org > dig.out.1.test$n || ret=1
if ns3_sends_aaaa_queries; then
  grep "status: SERVFAIL" dig.out.1.test$n > /dev/null || ret=1
fi
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
$DIG $DIGOPTS +short @10.53.0.4 count txt > dig.out.4.test$n || ret=1
eval count=`cat dig.out.2.test$n`
[ $count -le 50 ] || { ret=1; echo_i "count ($count) !<= 50"; }
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

n=`expr $n + 1`
echo_i "attempt permissible lookup ($n)"
ret=0
echo "12" > ans2/ans.limit
ns3_reset ns3/named3.conf.in
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.3 indirect6.example.org > dig.out.1.test$n || ret=1
grep "status: NOERROR" dig.out.1.test$n > /dev/null || ret=1
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
eval count=`cat dig.out.2.test$n`
[ $count -le 50 ] || { ret=1; echo_i "count ($count) !<= 50"; }
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

echo_i "set max-recursion-depth=100, max-recursion-queries=40"

n=`expr $n + 1`
echo_i "attempt excessive-queries lookup ($n)"
ret=0
echo "11" > ans2/ans.limit
ns3_reset ns3/named4.conf.in
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.3 indirect7.example.org > dig.out.1.test$n || ret=1
if ns3_sends_aaaa_queries; then
  grep "status: SERVFAIL" dig.out.1.test$n > /dev/null || ret=1
fi
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
eval count=`cat dig.out.2.test$n`
[ $count -le 40 ] || { ret=1; echo_i "count ($count) !<= 40"; }
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

n=`expr $n + 1`
echo_i "attempt permissible lookup ($n)"
ret=0
echo "9" > ans2/ans.limit
ns3_reset ns3/named4.conf.in
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS @10.53.0.3 indirect8.example.org > dig.out.1.test$n || ret=1
grep "status: NOERROR" dig.out.1.test$n > /dev/null || ret=1
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
eval count=`cat dig.out.2.test$n`
[ $count -le 40 ] || { ret=1; echo_i "count ($count) !<= 40"; }
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

n=`expr $n + 1`
echo_i "attempting NS explosion ($n)"
ret=0
ns3_reset ns3/named4.conf.in
$DIG $DIGOPTS @10.53.0.2 reset > /dev/null || ret=1
$DIG $DIGOPTS +short @10.53.0.3 ns1.1.example.net > dig.out.1.test$n || ret=1
$DIG $DIGOPTS +short @10.53.0.2 count txt > dig.out.2.test$n || ret=1
eval count=`cat dig.out.2.test$n`
[ $count -lt 50 ] || ret=1
$DIG $DIGOPTS +short @10.53.0.7 count txt > dig.out.3.test$n || ret=1
eval count=`cat dig.out.3.test$n`
[ $count -lt 50 ] || { ret=1; echo_i "count ($count) !<= 50";  }
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`

#grep "duplicate query" ns3/named.run
echo_i "exit status: $status"
[ $status -eq 0 ] || exit 1