summaryrefslogtreecommitdiffstats
path: root/doc/cephfs/mds-config-ref.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--doc/cephfs/mds-config-ref.rst546
1 files changed, 546 insertions, 0 deletions
diff --git a/doc/cephfs/mds-config-ref.rst b/doc/cephfs/mds-config-ref.rst
new file mode 100644
index 00000000..b91a4424
--- /dev/null
+++ b/doc/cephfs/mds-config-ref.rst
@@ -0,0 +1,546 @@
+======================
+ MDS Config Reference
+======================
+
+``mds cache memory limit``
+
+:Description: The memory limit the MDS should enforce for its cache.
+ Administrators should use this instead of ``mds cache size``.
+:Type: 64-bit Integer Unsigned
+:Default: ``1073741824``
+
+``mds cache reservation``
+
+:Description: The cache reservation (memory or inodes) for the MDS cache to maintain.
+ Once the MDS begins dipping into its reservation, it will recall
+ client state until its cache size shrinks to restore the
+ reservation.
+:Type: Float
+:Default: ``0.05``
+
+``mds cache size``
+
+:Description: The number of inodes to cache. A value of 0 indicates an
+ unlimited number. It is recommended to use
+ ``mds_cache_memory_limit`` to limit the amount of memory the MDS
+ cache uses.
+:Type: 32-bit Integer
+:Default: ``0``
+
+``mds cache mid``
+
+:Description: The insertion point for new items in the cache LRU
+ (from the top).
+
+:Type: Float
+:Default: ``0.7``
+
+
+``mds dir commit ratio``
+
+:Description: The fraction of directory that is dirty before Ceph commits using
+ a full update (instead of partial update).
+
+:Type: Float
+:Default: ``0.5``
+
+
+``mds dir max commit size``
+
+:Description: The maximum size of a directory update before Ceph breaks it into
+ smaller transactions) (MB).
+
+:Type: 32-bit Integer
+:Default: ``90``
+
+
+``mds decay halflife``
+
+:Description: The half-life of MDS cache temperature.
+:Type: Float
+:Default: ``5``
+
+``mds beacon interval``
+
+:Description: The frequency (in seconds) of beacon messages sent
+ to the monitor.
+
+:Type: Float
+:Default: ``4``
+
+
+``mds beacon grace``
+
+:Description: The interval without beacons before Ceph declares an MDS laggy
+ (and possibly replace it).
+
+:Type: Float
+:Default: ``15``
+
+
+``mds blacklist interval``
+
+:Description: The blacklist duration for failed MDSs in the OSD map. Note,
+ this controls how long failed MDS daemons will stay in the
+ OSDMap blacklist. It has no effect on how long something is
+ blacklisted when the administrator blacklists it manually. For
+ example, ``ceph osd blacklist add`` will still use the default
+ blacklist time.
+:Type: Float
+:Default: ``24.0*60.0``
+
+
+``mds reconnect timeout``
+
+:Description: The interval (in seconds) to wait for clients to reconnect
+ during MDS restart.
+
+:Type: Float
+:Default: ``45``
+
+
+``mds tick interval``
+
+:Description: How frequently the MDS performs internal periodic tasks.
+:Type: Float
+:Default: ``5``
+
+
+``mds dirstat min interval``
+
+:Description: The minimum interval (in seconds) to try to avoid propagating
+ recursive stats up the tree.
+
+:Type: Float
+:Default: ``1``
+
+``mds scatter nudge interval``
+
+:Description: How quickly dirstat changes propagate up.
+:Type: Float
+:Default: ``5``
+
+
+``mds client prealloc inos``
+
+:Description: The number of inode numbers to preallocate per client session.
+:Type: 32-bit Integer
+:Default: ``1000``
+
+
+``mds early reply``
+
+:Description: Determines whether the MDS should allow clients to see request
+ results before they commit to the journal.
+
+:Type: Boolean
+:Default: ``true``
+
+
+``mds default dir hash``
+
+:Description: The function to use for hashing files across directory fragments.
+:Type: 32-bit Integer
+:Default: ``2`` (i.e., rjenkins)
+
+
+``mds log skip corrupt events``
+
+:Description: Determines whether the MDS should try to skip corrupt journal
+ events during journal replay.
+
+:Type: Boolean
+:Default: ``false``
+
+
+``mds log max events``
+
+:Description: The maximum events in the journal before we initiate trimming.
+ Set to ``-1`` to disable limits.
+
+:Type: 32-bit Integer
+:Default: ``-1``
+
+
+``mds log max segments``
+
+:Description: The maximum number of segments (objects) in the journal before
+ we initiate trimming. Set to ``-1`` to disable limits.
+
+:Type: 32-bit Integer
+:Default: ``128``
+
+
+``mds bal sample interval``
+
+:Description: Determines how frequently to sample directory temperature
+ (for fragmentation decisions).
+
+:Type: Float
+:Default: ``3``
+
+
+``mds bal replicate threshold``
+
+:Description: The maximum temperature before Ceph attempts to replicate
+ metadata to other nodes.
+
+:Type: Float
+:Default: ``8000``
+
+
+``mds bal unreplicate threshold``
+
+:Description: The minimum temperature before Ceph stops replicating
+ metadata to other nodes.
+
+:Type: Float
+:Default: ``0``
+
+
+``mds bal split size``
+
+:Description: The maximum directory size before the MDS will split a directory
+ fragment into smaller bits.
+
+:Type: 32-bit Integer
+:Default: ``10000``
+
+
+``mds bal split rd``
+
+:Description: The maximum directory read temperature before Ceph splits
+ a directory fragment.
+
+:Type: Float
+:Default: ``25000``
+
+
+``mds bal split wr``
+
+:Description: The maximum directory write temperature before Ceph splits
+ a directory fragment.
+
+:Type: Float
+:Default: ``10000``
+
+
+``mds bal split bits``
+
+:Description: The number of bits by which to split a directory fragment.
+:Type: 32-bit Integer
+:Default: ``3``
+
+
+``mds bal merge size``
+
+:Description: The minimum directory size before Ceph tries to merge
+ adjacent directory fragments.
+
+:Type: 32-bit Integer
+:Default: ``50``
+
+
+``mds bal interval``
+
+:Description: The frequency (in seconds) of workload exchanges between MDSs.
+:Type: 32-bit Integer
+:Default: ``10``
+
+
+``mds bal fragment interval``
+
+:Description: The delay (in seconds) between a fragment being eligible for split
+ or merge and executing the fragmentation change.
+:Type: 32-bit Integer
+:Default: ``5``
+
+
+``mds bal fragment fast factor``
+
+:Description: The ratio by which frags may exceed the split size before
+ a split is executed immediately (skipping the fragment interval)
+:Type: Float
+:Default: ``1.5``
+
+``mds bal fragment size max``
+
+:Description: The maximum size of a fragment before any new entries
+ are rejected with ENOSPC.
+:Type: 32-bit Integer
+:Default: ``100000``
+
+``mds bal idle threshold``
+
+:Description: The minimum temperature before Ceph migrates a subtree
+ back to its parent.
+
+:Type: Float
+:Default: ``0``
+
+
+``mds bal max``
+
+:Description: The number of iterations to run balancer before Ceph stops.
+ (used for testing purposes only)
+
+:Type: 32-bit Integer
+:Default: ``-1``
+
+
+``mds bal max until``
+
+:Description: The number of seconds to run balancer before Ceph stops.
+ (used for testing purposes only)
+
+:Type: 32-bit Integer
+:Default: ``-1``
+
+
+``mds bal mode``
+
+:Description: The method for calculating MDS load.
+
+ - ``0`` = Hybrid.
+ - ``1`` = Request rate and latency.
+ - ``2`` = CPU load.
+
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds bal min rebalance``
+
+:Description: The minimum subtree temperature before Ceph migrates.
+:Type: Float
+:Default: ``0.1``
+
+
+``mds bal min start``
+
+:Description: The minimum subtree temperature before Ceph searches a subtree.
+:Type: Float
+:Default: ``0.2``
+
+
+``mds bal need min``
+
+:Description: The minimum fraction of target subtree size to accept.
+:Type: Float
+:Default: ``0.8``
+
+
+``mds bal need max``
+
+:Description: The maximum fraction of target subtree size to accept.
+:Type: Float
+:Default: ``1.2``
+
+
+``mds bal midchunk``
+
+:Description: Ceph will migrate any subtree that is larger than this fraction
+ of the target subtree size.
+
+:Type: Float
+:Default: ``0.3``
+
+
+``mds bal minchunk``
+
+:Description: Ceph will ignore any subtree that is smaller than this fraction
+ of the target subtree size.
+
+:Type: Float
+:Default: ``0.001``
+
+
+``mds bal target removal min``
+
+:Description: The minimum number of balancer iterations before Ceph removes
+ an old MDS target from the MDS map.
+
+:Type: 32-bit Integer
+:Default: ``5``
+
+
+``mds bal target removal max``
+
+:Description: The maximum number of balancer iteration before Ceph removes
+ an old MDS target from the MDS map.
+
+:Type: 32-bit Integer
+:Default: ``10``
+
+
+``mds replay interval``
+
+:Description: The journal poll interval when in standby-replay mode.
+ ("hot standby")
+
+:Type: Float
+:Default: ``1``
+
+
+``mds shutdown check``
+
+:Description: The interval for polling the cache during MDS shutdown.
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds thrash exports``
+
+:Description: Ceph will randomly export subtrees between nodes (testing only).
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds thrash fragments``
+
+:Description: Ceph will randomly fragment or merge directories.
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds dump cache on map``
+
+:Description: Ceph will dump the MDS cache contents to a file on each MDSMap.
+:Type: Boolean
+:Default: ``false``
+
+
+``mds dump cache after rejoin``
+
+:Description: Ceph will dump MDS cache contents to a file after
+ rejoining the cache (during recovery).
+
+:Type: Boolean
+:Default: ``false``
+
+
+``mds verify scatter``
+
+:Description: Ceph will assert that various scatter/gather invariants
+ are ``true`` (developers only).
+
+:Type: Boolean
+:Default: ``false``
+
+
+``mds debug scatterstat``
+
+:Description: Ceph will assert that various recursive stat invariants
+ are ``true`` (for developers only).
+
+:Type: Boolean
+:Default: ``false``
+
+
+``mds debug frag``
+
+:Description: Ceph will verify directory fragmentation invariants
+ when convenient (developers only).
+
+:Type: Boolean
+:Default: ``false``
+
+
+``mds debug auth pins``
+
+:Description: The debug auth pin invariants (for developers only).
+:Type: Boolean
+:Default: ``false``
+
+
+``mds debug subtrees``
+
+:Description: The debug subtree invariants (for developers only).
+:Type: Boolean
+:Default: ``false``
+
+
+``mds kill mdstable at``
+
+:Description: Ceph will inject MDS failure in MDSTable code
+ (for developers only).
+
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds kill export at``
+
+:Description: Ceph will inject MDS failure in the subtree export code
+ (for developers only).
+
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds kill import at``
+
+:Description: Ceph will inject MDS failure in the subtree import code
+ (for developers only).
+
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds kill link at``
+
+:Description: Ceph will inject MDS failure in hard link code
+ (for developers only).
+
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds kill rename at``
+
+:Description: Ceph will inject MDS failure in the rename code
+ (for developers only).
+
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds wipe sessions``
+
+:Description: Ceph will delete all client sessions on startup
+ (for testing only).
+
+:Type: Boolean
+:Default: ``false``
+
+
+``mds wipe ino prealloc``
+
+:Description: Ceph will delete ino preallocation metadata on startup
+ (for testing only).
+
+:Type: Boolean
+:Default: ``false``
+
+
+``mds skip ino``
+
+:Description: The number of inode numbers to skip on startup
+ (for testing only).
+
+:Type: 32-bit Integer
+:Default: ``0``
+
+
+``mds min caps per client``
+
+:Description: Set the minimum number of capabilities a client may hold.
+:Type: Integer
+:Default: ``100``
+
+
+``mds max ratio caps per client``
+
+:Description: Set the maximum ratio of current caps that may be recalled during MDS cache pressure.
+:Type: Float
+:Default: ``0.8``