summaryrefslogtreecommitdiffstats
path: root/doc/man/8/ceph.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/man/8/ceph.rst')
-rw-r--r--doc/man/8/ceph.rst1574
1 files changed, 1574 insertions, 0 deletions
diff --git a/doc/man/8/ceph.rst b/doc/man/8/ceph.rst
new file mode 100644
index 00000000..847abb7a
--- /dev/null
+++ b/doc/man/8/ceph.rst
@@ -0,0 +1,1574 @@
+:orphan:
+
+==================================
+ ceph -- ceph administration tool
+==================================
+
+.. program:: ceph
+
+Synopsis
+========
+
+| **ceph** **auth** [ *add* \| *caps* \| *del* \| *export* \| *get* \| *get-key* \| *get-or-create* \| *get-or-create-key* \| *import* \| *list* \| *print-key* \| *print_key* ] ...
+
+| **ceph** **compact**
+
+| **ceph** **config-key** [ *rm* | *exists* | *get* | *ls* | *dump* | *set* ] ...
+
+| **ceph** **daemon** *<name>* \| *<path>* *<command>* ...
+
+| **ceph** **daemonperf** *<name>* \| *<path>* [ *interval* [ *count* ] ]
+
+| **ceph** **df** *{detail}*
+
+| **ceph** **fs** [ *ls* \| *new* \| *reset* \| *rm* ] ...
+
+| **ceph** **fsid**
+
+| **ceph** **health** *{detail}*
+
+| **ceph** **heap** [ *dump* \| *start_profiler* \| *stop_profiler* \| *release* \| *get_release_rate* \| *set_release_rate* \| *stats* ] ...
+
+| **ceph** **injectargs** *<injectedargs>* [ *<injectedargs>*... ]
+
+| **ceph** **log** *<logtext>* [ *<logtext>*... ]
+
+| **ceph** **mds** [ *compat* \| *fail* \| *rm* \| *rmfailed* \| *set_state* \| *stat* \| *repaired* ] ...
+
+| **ceph** **mon** [ *add* \| *dump* \| *getmap* \| *remove* \| *stat* ] ...
+
+| **ceph** **mon_status**
+
+| **ceph** **osd** [ *blacklist* \| *blocked-by* \| *create* \| *new* \| *deep-scrub* \| *df* \| *down* \| *dump* \| *erasure-code-profile* \| *find* \| *getcrushmap* \| *getmap* \| *getmaxosd* \| *in* \| *ls* \| *lspools* \| *map* \| *metadata* \| *ok-to-stop* \| *out* \| *pause* \| *perf* \| *pg-temp* \| *force-create-pg* \| *primary-affinity* \| *primary-temp* \| *repair* \| *reweight* \| *reweight-by-pg* \| *rm* \| *destroy* \| *purge* \| *safe-to-destroy* \| *scrub* \| *set* \| *setcrushmap* \| *setmaxosd* \| *stat* \| *tree* \| *unpause* \| *unset* ] ...
+
+| **ceph** **osd** **crush** [ *add* \| *add-bucket* \| *create-or-move* \| *dump* \| *get-tunable* \| *link* \| *move* \| *remove* \| *rename-bucket* \| *reweight* \| *reweight-all* \| *reweight-subtree* \| *rm* \| *rule* \| *set* \| *set-tunable* \| *show-tunables* \| *tunables* \| *unlink* ] ...
+
+| **ceph** **osd** **pool** [ *create* \| *delete* \| *get* \| *get-quota* \| *ls* \| *mksnap* \| *rename* \| *rmsnap* \| *set* \| *set-quota* \| *stats* ] ...
+
+| **ceph** **osd** **pool** **application** [ *disable* \| *enable* \| *get* \| *rm* \| *set* ] ...
+
+| **ceph** **osd** **tier** [ *add* \| *add-cache* \| *cache-mode* \| *remove* \| *remove-overlay* \| *set-overlay* ] ...
+
+| **ceph** **pg** [ *debug* \| *deep-scrub* \| *dump* \| *dump_json* \| *dump_pools_json* \| *dump_stuck* \| *getmap* \| *ls* \| *ls-by-osd* \| *ls-by-pool* \| *ls-by-primary* \| *map* \| *repair* \| *scrub* \| *stat* ] ...
+
+| **ceph** **quorum** [ *enter* \| *exit* ]
+
+| **ceph** **quorum_status**
+
+| **ceph** **report** { *<tags>* [ *<tags>...* ] }
+
+| **ceph** **scrub**
+
+| **ceph** **status**
+
+| **ceph** **sync** **force** {--yes-i-really-mean-it} {--i-know-what-i-am-doing}
+
+| **ceph** **tell** *<name (type.id)> <command> [options...]*
+
+| **ceph** **version**
+
+Description
+===========
+
+:program:`ceph` is a control utility which is used for manual deployment and maintenance
+of a Ceph cluster. It provides a diverse set of commands that allows deployment of
+monitors, OSDs, placement groups, MDS and overall maintenance, administration
+of the cluster.
+
+Commands
+========
+
+auth
+----
+
+Manage authentication keys. It is used for adding, removing, exporting
+or updating of authentication keys for a particular entity such as a monitor or
+OSD. It uses some additional subcommands.
+
+Subcommand ``add`` adds authentication info for a particular entity from input
+file, or random key if no input is given and/or any caps specified in the command.
+
+Usage::
+
+ ceph auth add <entity> {<caps> [<caps>...]}
+
+Subcommand ``caps`` updates caps for **name** from caps specified in the command.
+
+Usage::
+
+ ceph auth caps <entity> <caps> [<caps>...]
+
+Subcommand ``del`` deletes all caps for ``name``.
+
+Usage::
+
+ ceph auth del <entity>
+
+Subcommand ``export`` writes keyring for requested entity, or master keyring if
+none given.
+
+Usage::
+
+ ceph auth export {<entity>}
+
+Subcommand ``get`` writes keyring file with requested key.
+
+Usage::
+
+ ceph auth get <entity>
+
+Subcommand ``get-key`` displays requested key.
+
+Usage::
+
+ ceph auth get-key <entity>
+
+Subcommand ``get-or-create`` adds authentication info for a particular entity
+from input file, or random key if no input given and/or any caps specified in the
+command.
+
+Usage::
+
+ ceph auth get-or-create <entity> {<caps> [<caps>...]}
+
+Subcommand ``get-or-create-key`` gets or adds key for ``name`` from system/caps
+pairs specified in the command. If key already exists, any given caps must match
+the existing caps for that key.
+
+Usage::
+
+ ceph auth get-or-create-key <entity> {<caps> [<caps>...]}
+
+Subcommand ``import`` reads keyring from input file.
+
+Usage::
+
+ ceph auth import
+
+Subcommand ``ls`` lists authentication state.
+
+Usage::
+
+ ceph auth ls
+
+Subcommand ``print-key`` displays requested key.
+
+Usage::
+
+ ceph auth print-key <entity>
+
+Subcommand ``print_key`` displays requested key.
+
+Usage::
+
+ ceph auth print_key <entity>
+
+
+compact
+-------
+
+Causes compaction of monitor's leveldb storage.
+
+Usage::
+
+ ceph compact
+
+
+config-key
+----------
+
+Manage configuration key. It uses some additional subcommands.
+
+Subcommand ``rm`` deletes configuration key.
+
+Usage::
+
+ ceph config-key rm <key>
+
+Subcommand ``exists`` checks for configuration keys existence.
+
+Usage::
+
+ ceph config-key exists <key>
+
+Subcommand ``get`` gets the configuration key.
+
+Usage::
+
+ ceph config-key get <key>
+
+Subcommand ``ls`` lists configuration keys.
+
+Usage::
+
+ ceph config-key ls
+
+Subcommand ``dump`` dumps configuration keys and values.
+
+Usage::
+
+ ceph config-key dump
+
+Subcommand ``set`` puts configuration key and value.
+
+Usage::
+
+ ceph config-key set <key> {<val>}
+
+
+daemon
+------
+
+Submit admin-socket commands.
+
+Usage::
+
+ ceph daemon {daemon_name|socket_path} {command} ...
+
+Example::
+
+ ceph daemon osd.0 help
+
+
+daemonperf
+----------
+
+Watch performance counters from a Ceph daemon.
+
+Usage::
+
+ ceph daemonperf {daemon_name|socket_path} [{interval} [{count}]]
+
+
+df
+--
+
+Show cluster's free space status.
+
+Usage::
+
+ ceph df {detail}
+
+.. _ceph features:
+
+features
+--------
+
+Show the releases and features of all connected daemons and clients connected
+to the cluster, along with the numbers of them in each bucket grouped by the
+corresponding features/releases. Each release of Ceph supports a different set
+of features, expressed by the features bitmask. New cluster features require
+that clients support the feature, or else they are not allowed to connect to
+these new features. As new features or capabilities are enabled after an
+upgrade, older clients are prevented from connecting.
+
+Usage::
+
+ ceph features
+
+fs
+--
+
+Manage cephfs filesystems. It uses some additional subcommands.
+
+Subcommand ``ls`` to list filesystems
+
+Usage::
+
+ ceph fs ls
+
+Subcommand ``new`` to make a new filesystem using named pools <metadata> and <data>
+
+Usage::
+
+ ceph fs new <fs_name> <metadata> <data>
+
+Subcommand ``reset`` is used for disaster recovery only: reset to a single-MDS map
+
+Usage::
+
+ ceph fs reset <fs_name> {--yes-i-really-mean-it}
+
+Subcommand ``rm`` to disable the named filesystem
+
+Usage::
+
+ ceph fs rm <fs_name> {--yes-i-really-mean-it}
+
+
+fsid
+----
+
+Show cluster's FSID/UUID.
+
+Usage::
+
+ ceph fsid
+
+
+health
+------
+
+Show cluster's health.
+
+Usage::
+
+ ceph health {detail}
+
+
+heap
+----
+
+Show heap usage info (available only if compiled with tcmalloc)
+
+Usage::
+
+ ceph heap dump|start_profiler|stop_profiler|stats
+
+Subcommand ``release`` to make TCMalloc to releases no-longer-used memory back to the kernel at once.
+
+Usage::
+
+ ceph heap release
+
+Subcommand ``(get|set)_release_rate`` get or set the TCMalloc memory release rate. TCMalloc releases
+no-longer-used memory back to the kernel gradually. the rate controls how quickly this happens.
+Increase this setting to make TCMalloc to return unused memory more frequently. 0 means never return
+memory to system, 1 means wait for 1000 pages after releasing a page to system. It is ``1.0`` by default..
+
+Usage::
+
+ ceph heap get_release_rate|set_release_rate {<val>}
+
+injectargs
+----------
+
+Inject configuration arguments into monitor.
+
+Usage::
+
+ ceph injectargs <injected_args> [<injected_args>...]
+
+
+log
+---
+
+Log supplied text to the monitor log.
+
+Usage::
+
+ ceph log <logtext> [<logtext>...]
+
+
+mds
+---
+
+Manage metadata server configuration and administration. It uses some
+additional subcommands.
+
+Subcommand ``compat`` manages compatible features. It uses some additional
+subcommands.
+
+Subcommand ``rm_compat`` removes compatible feature.
+
+Usage::
+
+ ceph mds compat rm_compat <int[0-]>
+
+Subcommand ``rm_incompat`` removes incompatible feature.
+
+Usage::
+
+ ceph mds compat rm_incompat <int[0-]>
+
+Subcommand ``show`` shows mds compatibility settings.
+
+Usage::
+
+ ceph mds compat show
+
+Subcommand ``fail`` forces mds to status fail.
+
+Usage::
+
+ ceph mds fail <role|gid>
+
+Subcommand ``rm`` removes inactive mds.
+
+Usage::
+
+ ceph mds rm <int[0-]> <name> (type.id)>
+
+Subcommand ``rmfailed`` removes failed mds.
+
+Usage::
+
+ ceph mds rmfailed <int[0-]>
+
+Subcommand ``set_state`` sets mds state of <gid> to <numeric-state>.
+
+Usage::
+
+ ceph mds set_state <int[0-]> <int[0-20]>
+
+Subcommand ``stat`` shows MDS status.
+
+Usage::
+
+ ceph mds stat
+
+Subcommand ``repaired`` mark a damaged MDS rank as no longer damaged.
+
+Usage::
+
+ ceph mds repaired <role>
+
+mon
+---
+
+Manage monitor configuration and administration. It uses some additional
+subcommands.
+
+Subcommand ``add`` adds new monitor named <name> at <addr>.
+
+Usage::
+
+ ceph mon add <name> <IPaddr[:port]>
+
+Subcommand ``dump`` dumps formatted monmap (optionally from epoch)
+
+Usage::
+
+ ceph mon dump {<int[0-]>}
+
+Subcommand ``getmap`` gets monmap.
+
+Usage::
+
+ ceph mon getmap {<int[0-]>}
+
+Subcommand ``remove`` removes monitor named <name>.
+
+Usage::
+
+ ceph mon remove <name>
+
+Subcommand ``stat`` summarizes monitor status.
+
+Usage::
+
+ ceph mon stat
+
+mon_status
+----------
+
+Reports status of monitors.
+
+Usage::
+
+ ceph mon_status
+
+mgr
+---
+
+Ceph manager daemon configuration and management.
+
+Subcommand ``dump`` dumps the latest MgrMap, which describes the active
+and standby manager daemons.
+
+Usage::
+
+ ceph mgr dump
+
+Subcommand ``fail`` will mark a manager daemon as failed, removing it
+from the manager map. If it is the active manager daemon a standby
+will take its place.
+
+Usage::
+
+ ceph mgr fail <name>
+
+Subcommand ``module ls`` will list currently enabled manager modules (plugins).
+
+Usage::
+
+ ceph mgr module ls
+
+Subcommand ``module enable`` will enable a manager module. Available modules are included in MgrMap and visible via ``mgr dump``.
+
+Usage::
+
+ ceph mgr module enable <module>
+
+Subcommand ``module disable`` will disable an active manager module.
+
+Usage::
+
+ ceph mgr module disable <module>
+
+Subcommand ``metadata`` will report metadata about all manager daemons or, if the name is specified, a single manager daemon.
+
+Usage::
+
+ ceph mgr metadata [name]
+
+Subcommand ``versions`` will report a count of running daemon versions.
+
+Usage::
+
+ ceph mgr versions
+
+Subcommand ``count-metadata`` will report a count of any daemon metadata field.
+
+Usage::
+
+ ceph mgr count-metadata <field>
+
+.. _ceph-admin-osd:
+
+osd
+---
+
+Manage OSD configuration and administration. It uses some additional
+subcommands.
+
+Subcommand ``blacklist`` manage blacklisted clients. It uses some additional
+subcommands.
+
+Subcommand ``add`` add <addr> to blacklist (optionally until <expire> seconds
+from now)
+
+Usage::
+
+ ceph osd blacklist add <EntityAddr> {<float[0.0-]>}
+
+Subcommand ``ls`` show blacklisted clients
+
+Usage::
+
+ ceph osd blacklist ls
+
+Subcommand ``rm`` remove <addr> from blacklist
+
+Usage::
+
+ ceph osd blacklist rm <EntityAddr>
+
+Subcommand ``blocked-by`` prints a histogram of which OSDs are blocking their peers
+
+Usage::
+
+ ceph osd blocked-by
+
+Subcommand ``create`` creates new osd (with optional UUID and ID).
+
+This command is DEPRECATED as of the Luminous release, and will be removed in
+a future release.
+
+Subcommand ``new`` should instead be used.
+
+Usage::
+
+ ceph osd create {<uuid>} {<id>}
+
+Subcommand ``new`` can be used to create a new OSD or to recreate a previously
+destroyed OSD with a specific *id*. The new OSD will have the specified *uuid*,
+and the command expects a JSON file containing the base64 cephx key for auth
+entity *client.osd.<id>*, as well as optional base64 cepx key for dm-crypt
+lockbox access and a dm-crypt key. Specifying a dm-crypt requires specifying
+the accompanying lockbox cephx key.
+
+Usage::
+
+ ceph osd new {<uuid>} {<id>} -i {<params.json>}
+
+The parameters JSON file is optional but if provided, is expected to maintain
+a form of the following format::
+
+ {
+ "cephx_secret": "AQBWtwhZdBO5ExAAIDyjK2Bh16ZXylmzgYYEjg==",
+ "crush_device_class": "myclass"
+ }
+
+Or::
+
+ {
+ "cephx_secret": "AQBWtwhZdBO5ExAAIDyjK2Bh16ZXylmzgYYEjg==",
+ "cephx_lockbox_secret": "AQDNCglZuaeVCRAAYr76PzR1Anh7A0jswkODIQ==",
+ "dmcrypt_key": "<dm-crypt key>",
+ "crush_device_class": "myclass"
+ }
+
+Or::
+
+ {
+ "crush_device_class": "myclass"
+ }
+
+The "crush_device_class" property is optional. If specified, it will set the
+initial CRUSH device class for the new OSD.
+
+
+Subcommand ``crush`` is used for CRUSH management. It uses some additional
+subcommands.
+
+Subcommand ``add`` adds or updates crushmap position and weight for <name> with
+<weight> and location <args>.
+
+Usage::
+
+ ceph osd crush add <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...]
+
+Subcommand ``add-bucket`` adds no-parent (probably root) crush bucket <name> of
+type <type>.
+
+Usage::
+
+ ceph osd crush add-bucket <name> <type>
+
+Subcommand ``create-or-move`` creates entry or moves existing entry for <name>
+<weight> at/to location <args>.
+
+Usage::
+
+ ceph osd crush create-or-move <osdname (id|osd.id)> <float[0.0-]> <args>
+ [<args>...]
+
+Subcommand ``dump`` dumps crush map.
+
+Usage::
+
+ ceph osd crush dump
+
+Subcommand ``get-tunable`` get crush tunable straw_calc_version
+
+Usage::
+
+ ceph osd crush get-tunable straw_calc_version
+
+Subcommand ``link`` links existing entry for <name> under location <args>.
+
+Usage::
+
+ ceph osd crush link <name> <args> [<args>...]
+
+Subcommand ``move`` moves existing entry for <name> to location <args>.
+
+Usage::
+
+ ceph osd crush move <name> <args> [<args>...]
+
+Subcommand ``remove`` removes <name> from crush map (everywhere, or just at
+<ancestor>).
+
+Usage::
+
+ ceph osd crush remove <name> {<ancestor>}
+
+Subcommand ``rename-bucket`` renames bucket <srcname> to <dstname>
+
+Usage::
+
+ ceph osd crush rename-bucket <srcname> <dstname>
+
+Subcommand ``reweight`` change <name>'s weight to <weight> in crush map.
+
+Usage::
+
+ ceph osd crush reweight <name> <float[0.0-]>
+
+Subcommand ``reweight-all`` recalculate the weights for the tree to
+ensure they sum correctly
+
+Usage::
+
+ ceph osd crush reweight-all
+
+Subcommand ``reweight-subtree`` changes all leaf items beneath <name>
+to <weight> in crush map
+
+Usage::
+
+ ceph osd crush reweight-subtree <name> <weight>
+
+Subcommand ``rm`` removes <name> from crush map (everywhere, or just at
+<ancestor>).
+
+Usage::
+
+ ceph osd crush rm <name> {<ancestor>}
+
+Subcommand ``rule`` is used for creating crush rules. It uses some additional
+subcommands.
+
+Subcommand ``create-erasure`` creates crush rule <name> for erasure coded pool
+created with <profile> (default default).
+
+Usage::
+
+ ceph osd crush rule create-erasure <name> {<profile>}
+
+Subcommand ``create-simple`` creates crush rule <name> to start from <root>,
+replicate across buckets of type <type>, using a choose mode of <firstn|indep>
+(default firstn; indep best for erasure pools).
+
+Usage::
+
+ ceph osd crush rule create-simple <name> <root> <type> {firstn|indep}
+
+Subcommand ``dump`` dumps crush rule <name> (default all).
+
+Usage::
+
+ ceph osd crush rule dump {<name>}
+
+Subcommand ``ls`` lists crush rules.
+
+Usage::
+
+ ceph osd crush rule ls
+
+Subcommand ``rm`` removes crush rule <name>.
+
+Usage::
+
+ ceph osd crush rule rm <name>
+
+Subcommand ``set`` used alone, sets crush map from input file.
+
+Usage::
+
+ ceph osd crush set
+
+Subcommand ``set`` with osdname/osd.id update crushmap position and weight
+for <name> to <weight> with location <args>.
+
+Usage::
+
+ ceph osd crush set <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...]
+
+Subcommand ``set-tunable`` set crush tunable <tunable> to <value>. The only
+tunable that can be set is straw_calc_version.
+
+Usage::
+
+ ceph osd crush set-tunable straw_calc_version <value>
+
+Subcommand ``show-tunables`` shows current crush tunables.
+
+Usage::
+
+ ceph osd crush show-tunables
+
+Subcommand ``tree`` shows the crush buckets and items in a tree view.
+
+Usage::
+
+ ceph osd crush tree
+
+Subcommand ``tunables`` sets crush tunables values to <profile>.
+
+Usage::
+
+ ceph osd crush tunables legacy|argonaut|bobtail|firefly|hammer|optimal|default
+
+Subcommand ``unlink`` unlinks <name> from crush map (everywhere, or just at
+<ancestor>).
+
+Usage::
+
+ ceph osd crush unlink <name> {<ancestor>}
+
+Subcommand ``df`` shows OSD utilization
+
+Usage::
+
+ ceph osd df {plain|tree}
+
+Subcommand ``deep-scrub`` initiates deep scrub on specified osd.
+
+Usage::
+
+ ceph osd deep-scrub <who>
+
+Subcommand ``down`` sets osd(s) <id> [<id>...] down.
+
+Usage::
+
+ ceph osd down <ids> [<ids>...]
+
+Subcommand ``dump`` prints summary of OSD map.
+
+Usage::
+
+ ceph osd dump {<int[0-]>}
+
+Subcommand ``erasure-code-profile`` is used for managing the erasure code
+profiles. It uses some additional subcommands.
+
+Subcommand ``get`` gets erasure code profile <name>.
+
+Usage::
+
+ ceph osd erasure-code-profile get <name>
+
+Subcommand ``ls`` lists all erasure code profiles.
+
+Usage::
+
+ ceph osd erasure-code-profile ls
+
+Subcommand ``rm`` removes erasure code profile <name>.
+
+Usage::
+
+ ceph osd erasure-code-profile rm <name>
+
+Subcommand ``set`` creates erasure code profile <name> with [<key[=value]> ...]
+pairs. Add a --force at the end to override an existing profile (IT IS RISKY).
+
+Usage::
+
+ ceph osd erasure-code-profile set <name> {<profile> [<profile>...]}
+
+Subcommand ``find`` find osd <id> in the CRUSH map and shows its location.
+
+Usage::
+
+ ceph osd find <int[0-]>
+
+Subcommand ``getcrushmap`` gets CRUSH map.
+
+Usage::
+
+ ceph osd getcrushmap {<int[0-]>}
+
+Subcommand ``getmap`` gets OSD map.
+
+Usage::
+
+ ceph osd getmap {<int[0-]>}
+
+Subcommand ``getmaxosd`` shows largest OSD id.
+
+Usage::
+
+ ceph osd getmaxosd
+
+Subcommand ``in`` sets osd(s) <id> [<id>...] in.
+
+Usage::
+
+ ceph osd in <ids> [<ids>...]
+
+Subcommand ``lost`` marks osd as permanently lost. THIS DESTROYS DATA IF NO
+MORE REPLICAS EXIST, BE CAREFUL.
+
+Usage::
+
+ ceph osd lost <int[0-]> {--yes-i-really-mean-it}
+
+Subcommand ``ls`` shows all OSD ids.
+
+Usage::
+
+ ceph osd ls {<int[0-]>}
+
+Subcommand ``lspools`` lists pools.
+
+Usage::
+
+ ceph osd lspools {<int>}
+
+Subcommand ``map`` finds pg for <object> in <pool>.
+
+Usage::
+
+ ceph osd map <poolname> <objectname>
+
+Subcommand ``metadata`` fetches metadata for osd <id>.
+
+Usage::
+
+ ceph osd metadata {int[0-]} (default all)
+
+Subcommand ``out`` sets osd(s) <id> [<id>...] out.
+
+Usage::
+
+ ceph osd out <ids> [<ids>...]
+
+Subcommand ``ok-to-stop`` checks whether the list of OSD(s) can be
+stopped without immediately making data unavailable. That is, all
+data should remain readable and writeable, although data redundancy
+may be reduced as some PGs may end up in a degraded (but active)
+state. It will return a success code if it is okay to stop the
+OSD(s), or an error code and informative message if it is not or if no
+conclusion can be drawn at the current time.
+
+Usage::
+
+ ceph osd ok-to-stop <id> [<ids>...]
+
+Subcommand ``pause`` pauses osd.
+
+Usage::
+
+ ceph osd pause
+
+Subcommand ``perf`` prints dump of OSD perf summary stats.
+
+Usage::
+
+ ceph osd perf
+
+Subcommand ``pg-temp`` set pg_temp mapping pgid:[<id> [<id>...]] (developers
+only).
+
+Usage::
+
+ ceph osd pg-temp <pgid> {<id> [<id>...]}
+
+Subcommand ``force-create-pg`` forces creation of pg <pgid>.
+
+Usage::
+
+ ceph osd force-create-pg <pgid>
+
+
+Subcommand ``pool`` is used for managing data pools. It uses some additional
+subcommands.
+
+Subcommand ``create`` creates pool.
+
+Usage::
+
+ ceph osd pool create <poolname> <int[0-]> {<int[0-]>} {replicated|erasure}
+ {<erasure_code_profile>} {<rule>} {<int>}
+
+Subcommand ``delete`` deletes pool.
+
+Usage::
+
+ ceph osd pool delete <poolname> {<poolname>} {--yes-i-really-really-mean-it}
+
+Subcommand ``get`` gets pool parameter <var>.
+
+Usage::
+
+ ceph osd pool get <poolname> size|min_size|pg_num|pgp_num|crush_rule|write_fadvise_dontneed
+
+Only for tiered pools::
+
+ ceph osd pool get <poolname> hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|
+ target_max_objects|target_max_bytes|cache_target_dirty_ratio|cache_target_dirty_high_ratio|
+ cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age|
+ min_read_recency_for_promote|hit_set_grade_decay_rate|hit_set_search_last_n
+
+Only for erasure coded pools::
+
+ ceph osd pool get <poolname> erasure_code_profile
+
+Use ``all`` to get all pool parameters that apply to the pool's type::
+
+ ceph osd pool get <poolname> all
+
+Subcommand ``get-quota`` obtains object or byte limits for pool.
+
+Usage::
+
+ ceph osd pool get-quota <poolname>
+
+Subcommand ``ls`` list pools
+
+Usage::
+
+ ceph osd pool ls {detail}
+
+Subcommand ``mksnap`` makes snapshot <snap> in <pool>.
+
+Usage::
+
+ ceph osd pool mksnap <poolname> <snap>
+
+Subcommand ``rename`` renames <srcpool> to <destpool>.
+
+Usage::
+
+ ceph osd pool rename <poolname> <poolname>
+
+Subcommand ``rmsnap`` removes snapshot <snap> from <pool>.
+
+Usage::
+
+ ceph osd pool rmsnap <poolname> <snap>
+
+Subcommand ``set`` sets pool parameter <var> to <val>.
+
+Usage::
+
+ ceph osd pool set <poolname> size|min_size|pg_num|
+ pgp_num|crush_rule|hashpspool|nodelete|nopgchange|nosizechange|
+ hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|debug_fake_ec_pool|
+ target_max_bytes|target_max_objects|cache_target_dirty_ratio|
+ cache_target_dirty_high_ratio|
+ cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age|
+ min_read_recency_for_promote|write_fadvise_dontneed|hit_set_grade_decay_rate|
+ hit_set_search_last_n
+ <val> {--yes-i-really-mean-it}
+
+Subcommand ``set-quota`` sets object or byte limit on pool.
+
+Usage::
+
+ ceph osd pool set-quota <poolname> max_objects|max_bytes <val>
+
+Subcommand ``stats`` obtain stats from all pools, or from specified pool.
+
+Usage::
+
+ ceph osd pool stats {<name>}
+
+Subcommand ``application`` is used for adding an annotation to the given
+pool. By default, the possible applications are object, block, and file
+storage (corresponding app-names are "rgw", "rbd", and "cephfs"). However,
+there might be other applications as well. Based on the application, there
+may or may not be some processing conducted.
+
+Subcommand ``disable`` disables the given application on the given pool.
+
+Usage::
+
+ ceph osd pool application disable <pool-name> <app> {--yes-i-really-mean-it}
+
+Subcommand ``enable`` adds an annotation to the given pool for the mentioned
+application.
+
+Usage::
+
+ ceph osd pool application enable <pool-name> <app> {--yes-i-really-mean-it}
+
+Subcommand ``get`` displays the value for the given key that is assosciated
+with the given application of the given pool. Not passing the optional
+arguments would display all key-value pairs for all applications for all
+pools.
+
+Usage::
+
+ ceph osd pool application get {<pool-name>} {<app>} {<key>}
+
+Subcommand ``rm`` removes the key-value pair for the given key in the given
+application of the given pool.
+
+Usage::
+
+ ceph osd pool application rm <pool-name> <app> <key>
+
+Subcommand ``set`` assosciates or updates, if it already exists, a key-value
+pair with the given application for the given pool.
+
+Usage::
+
+ ceph osd pool application set <pool-name> <app> <key> <value>
+
+Subcommand ``primary-affinity`` adjust osd primary-affinity from 0.0 <=<weight>
+<= 1.0
+
+Usage::
+
+ ceph osd primary-affinity <osdname (id|osd.id)> <float[0.0-1.0]>
+
+Subcommand ``primary-temp`` sets primary_temp mapping pgid:<id>|-1 (developers
+only).
+
+Usage::
+
+ ceph osd primary-temp <pgid> <id>
+
+Subcommand ``repair`` initiates repair on a specified osd.
+
+Usage::
+
+ ceph osd repair <who>
+
+Subcommand ``reweight`` reweights osd to 0.0 < <weight> < 1.0.
+
+Usage::
+
+ osd reweight <int[0-]> <float[0.0-1.0]>
+
+Subcommand ``reweight-by-pg`` reweight OSDs by PG distribution
+[overload-percentage-for-consideration, default 120].
+
+Usage::
+
+ ceph osd reweight-by-pg {<int[100-]>} {<poolname> [<poolname...]}
+ {--no-increasing}
+
+Subcommand ``reweight-by-utilization`` reweight OSDs by utilization
+[overload-percentage-for-consideration, default 120].
+
+Usage::
+
+ ceph osd reweight-by-utilization {<int[100-]>}
+ {--no-increasing}
+
+Subcommand ``rm`` removes osd(s) <id> [<id>...] from the OSD map.
+
+
+Usage::
+
+ ceph osd rm <ids> [<ids>...]
+
+Subcommand ``destroy`` marks OSD *id* as *destroyed*, removing its cephx
+entity's keys and all of its dm-crypt and daemon-private config key
+entries.
+
+This command will not remove the OSD from crush, nor will it remove the
+OSD from the OSD map. Instead, once the command successfully completes,
+the OSD will show marked as *destroyed*.
+
+In order to mark an OSD as destroyed, the OSD must first be marked as
+**lost**.
+
+Usage::
+
+ ceph osd destroy <id> {--yes-i-really-mean-it}
+
+
+Subcommand ``purge`` performs a combination of ``osd destroy``,
+``osd rm`` and ``osd crush remove``.
+
+Usage::
+
+ ceph osd purge <id> {--yes-i-really-mean-it}
+
+Subcommand ``safe-to-destroy`` checks whether it is safe to remove or
+destroy an OSD without reducing overall data redundancy or durability.
+It will return a success code if it is definitely safe, or an error
+code and informative message if it is not or if no conclusion can be
+drawn at the current time.
+
+Usage::
+
+ ceph osd safe-to-destroy <id> [<ids>...]
+
+Subcommand ``scrub`` initiates scrub on specified osd.
+
+Usage::
+
+ ceph osd scrub <who>
+
+Subcommand ``set`` sets <key>.
+
+Usage::
+
+ ceph osd set full|pause|noup|nodown|noout|noin|nobackfill|
+ norebalance|norecover|noscrub|nodeep-scrub|notieragent
+
+Subcommand ``setcrushmap`` sets crush map from input file.
+
+Usage::
+
+ ceph osd setcrushmap
+
+Subcommand ``setmaxosd`` sets new maximum osd value.
+
+Usage::
+
+ ceph osd setmaxosd <int[0-]>
+
+Subcommand ``set-require-min-compat-client`` enforces the cluster to be backward
+compatible with the specified client version. This subcommand prevents you from
+making any changes (e.g., crush tunables, or using new features) that
+would violate the current setting. Please note, This subcommand will fail if
+any connected daemon or client is not compatible with the features offered by
+the given <version>. To see the features and releases of all clients connected
+to cluster, please see `ceph features`_.
+
+Usage::
+
+ ceph osd set-require-min-compat-client <version>
+
+Subcommand ``stat`` prints summary of OSD map.
+
+Usage::
+
+ ceph osd stat
+
+Subcommand ``tier`` is used for managing tiers. It uses some additional
+subcommands.
+
+Subcommand ``add`` adds the tier <tierpool> (the second one) to base pool <pool>
+(the first one).
+
+Usage::
+
+ ceph osd tier add <poolname> <poolname> {--force-nonempty}
+
+Subcommand ``add-cache`` adds a cache <tierpool> (the second one) of size <size>
+to existing pool <pool> (the first one).
+
+Usage::
+
+ ceph osd tier add-cache <poolname> <poolname> <int[0-]>
+
+Subcommand ``cache-mode`` specifies the caching mode for cache tier <pool>.
+
+Usage::
+
+ ceph osd tier cache-mode <poolname> none|writeback|forward|readonly|
+ readforward|readproxy
+
+Subcommand ``remove`` removes the tier <tierpool> (the second one) from base pool
+<pool> (the first one).
+
+Usage::
+
+ ceph osd tier remove <poolname> <poolname>
+
+Subcommand ``remove-overlay`` removes the overlay pool for base pool <pool>.
+
+Usage::
+
+ ceph osd tier remove-overlay <poolname>
+
+Subcommand ``set-overlay`` set the overlay pool for base pool <pool> to be
+<overlaypool>.
+
+Usage::
+
+ ceph osd tier set-overlay <poolname> <poolname>
+
+Subcommand ``tree`` prints OSD tree.
+
+Usage::
+
+ ceph osd tree {<int[0-]>}
+
+Subcommand ``unpause`` unpauses osd.
+
+Usage::
+
+ ceph osd unpause
+
+Subcommand ``unset`` unsets <key>.
+
+Usage::
+
+ ceph osd unset full|pause|noup|nodown|noout|noin|nobackfill|
+ norebalance|norecover|noscrub|nodeep-scrub|notieragent
+
+
+pg
+--
+
+It is used for managing the placement groups in OSDs. It uses some
+additional subcommands.
+
+Subcommand ``debug`` shows debug info about pgs.
+
+Usage::
+
+ ceph pg debug unfound_objects_exist|degraded_pgs_exist
+
+Subcommand ``deep-scrub`` starts deep-scrub on <pgid>.
+
+Usage::
+
+ ceph pg deep-scrub <pgid>
+
+Subcommand ``dump`` shows human-readable versions of pg map (only 'all' valid
+with plain).
+
+Usage::
+
+ ceph pg dump {all|summary|sum|delta|pools|osds|pgs|pgs_brief} [{all|summary|sum|delta|pools|osds|pgs|pgs_brief...]}
+
+Subcommand ``dump_json`` shows human-readable version of pg map in json only.
+
+Usage::
+
+ ceph pg dump_json {all|summary|sum|delta|pools|osds|pgs|pgs_brief} [{all|summary|sum|delta|pools|osds|pgs|pgs_brief...]}
+
+Subcommand ``dump_pools_json`` shows pg pools info in json only.
+
+Usage::
+
+ ceph pg dump_pools_json
+
+Subcommand ``dump_stuck`` shows information about stuck pgs.
+
+Usage::
+
+ ceph pg dump_stuck {inactive|unclean|stale|undersized|degraded [inactive|unclean|stale|undersized|degraded...]}
+ {<int>}
+
+Subcommand ``getmap`` gets binary pg map to -o/stdout.
+
+Usage::
+
+ ceph pg getmap
+
+Subcommand ``ls`` lists pg with specific pool, osd, state
+
+Usage::
+
+ ceph pg ls {<int>} {<pg-state> [<pg-state>...]}
+
+Subcommand ``ls-by-osd`` lists pg on osd [osd]
+
+Usage::
+
+ ceph pg ls-by-osd <osdname (id|osd.id)> {<int>}
+ {<pg-state> [<pg-state>...]}
+
+Subcommand ``ls-by-pool`` lists pg with pool = [poolname]
+
+Usage::
+
+ ceph pg ls-by-pool <poolstr> {<int>} {<pg-state> [<pg-state>...]}
+
+Subcommand ``ls-by-primary`` lists pg with primary = [osd]
+
+Usage::
+
+ ceph pg ls-by-primary <osdname (id|osd.id)> {<int>}
+ {<pg-state> [<pg-state>...]}
+
+Subcommand ``map`` shows mapping of pg to osds.
+
+Usage::
+
+ ceph pg map <pgid>
+
+Subcommand ``repair`` starts repair on <pgid>.
+
+Usage::
+
+ ceph pg repair <pgid>
+
+Subcommand ``scrub`` starts scrub on <pgid>.
+
+Usage::
+
+ ceph pg scrub <pgid>
+
+Subcommand ``stat`` shows placement group status.
+
+Usage::
+
+ ceph pg stat
+
+
+quorum
+------
+
+Cause MON to enter or exit quorum.
+
+Usage::
+
+ ceph quorum enter|exit
+
+Note: this only works on the MON to which the ``ceph`` command is connected.
+If you want a specific MON to enter or exit quorum, use this syntax::
+
+ ceph tell mon.<id> quorum enter|exit
+
+quorum_status
+-------------
+
+Reports status of monitor quorum.
+
+Usage::
+
+ ceph quorum_status
+
+
+report
+------
+
+Reports full status of cluster, optional title tag strings.
+
+Usage::
+
+ ceph report {<tags> [<tags>...]}
+
+
+scrub
+-----
+
+Scrubs the monitor stores.
+
+Usage::
+
+ ceph scrub
+
+
+status
+------
+
+Shows cluster status.
+
+Usage::
+
+ ceph status
+
+
+sync force
+----------
+
+Forces sync of and clear monitor store.
+
+Usage::
+
+ ceph sync force {--yes-i-really-mean-it} {--i-know-what-i-am-doing}
+
+
+tell
+----
+
+Sends a command to a specific daemon.
+
+Usage::
+
+ ceph tell <name (type.id)> <command> [options...]
+
+
+List all available commands.
+
+Usage::
+
+ ceph tell <name (type.id)> help
+
+version
+-------
+
+Show mon daemon version
+
+Usage::
+
+ ceph version
+
+Options
+=======
+
+.. option:: -i infile
+
+ will specify an input file to be passed along as a payload with the
+ command to the monitor cluster. This is only used for specific
+ monitor commands.
+
+.. option:: -o outfile
+
+ will write any payload returned by the monitor cluster with its
+ reply to outfile. Only specific monitor commands (e.g. osd getmap)
+ return a payload.
+
+.. option:: --setuser user
+
+ will apply the appropriate user ownership to the file specified by
+ the option '-o'.
+
+.. option:: --setgroup group
+
+ will apply the appropriate group ownership to the file specified by
+ the option '-o'.
+
+.. option:: -c ceph.conf, --conf=ceph.conf
+
+ Use ceph.conf configuration file instead of the default
+ ``/etc/ceph/ceph.conf`` to determine monitor addresses during startup.
+
+.. option:: --id CLIENT_ID, --user CLIENT_ID
+
+ Client id for authentication.
+
+.. option:: --name CLIENT_NAME, -n CLIENT_NAME
+
+ Client name for authentication.
+
+.. option:: --cluster CLUSTER
+
+ Name of the Ceph cluster.
+
+.. option:: --admin-daemon ADMIN_SOCKET, daemon DAEMON_NAME
+
+ Submit admin-socket commands via admin sockets in /var/run/ceph.
+
+.. option:: --admin-socket ADMIN_SOCKET_NOPE
+
+ You probably mean --admin-daemon
+
+.. option:: -s, --status
+
+ Show cluster status.
+
+.. option:: -w, --watch
+
+ Watch live cluster changes.
+
+.. option:: --watch-debug
+
+ Watch debug events.
+
+.. option:: --watch-info
+
+ Watch info events.
+
+.. option:: --watch-sec
+
+ Watch security events.
+
+.. option:: --watch-warn
+
+ Watch warning events.
+
+.. option:: --watch-error
+
+ Watch error events.
+
+.. option:: --version, -v
+
+ Display version.
+
+.. option:: --verbose
+
+ Make verbose.
+
+.. option:: --concise
+
+ Make less verbose.
+
+.. option:: -f {json,json-pretty,xml,xml-pretty,plain}, --format
+
+ Format of output.
+
+.. option:: --connect-timeout CLUSTER_TIMEOUT
+
+ Set a timeout for connecting to the cluster.
+
+.. option:: --no-increasing
+
+ ``--no-increasing`` is off by default. So increasing the osd weight is allowed
+ using the ``reweight-by-utilization`` or ``test-reweight-by-utilization`` commands.
+ If this option is used with these commands, it will help not to increase osd weight
+ even the osd is under utilized.
+
+.. option:: --block
+
+ block until completion (scrub and deep-scrub only)
+
+Availability
+============
+
+:program:`ceph` is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to
+the Ceph documentation at http://ceph.com/docs for more information.
+
+
+See also
+========
+
+:doc:`ceph-mon <ceph-mon>`\(8),
+:doc:`ceph-osd <ceph-osd>`\(8),
+:doc:`ceph-mds <ceph-mds>`\(8)