diff options
Diffstat (limited to '')
-rw-r--r-- | doc/rados/configuration/auth-config-ref.rst | 378 |
1 files changed, 378 insertions, 0 deletions
diff --git a/doc/rados/configuration/auth-config-ref.rst b/doc/rados/configuration/auth-config-ref.rst new file mode 100644 index 00000000..c6816f1e --- /dev/null +++ b/doc/rados/configuration/auth-config-ref.rst @@ -0,0 +1,378 @@ +======================== + Cephx Config Reference +======================== + +The ``cephx`` protocol is enabled by default. Cryptographic authentication has +some computational costs, though they should generally be quite low. If the +network environment connecting your client and server hosts is very safe and +you cannot afford authentication, you can turn it off. **This is not generally +recommended**. + +.. note:: If you disable authentication, you are at risk of a man-in-the-middle + attack altering your client/server messages, which could lead to disastrous + security effects. + +For creating users, see `User Management`_. For details on the architecture +of Cephx, see `Architecture - High Availability Authentication`_. + + +Deployment Scenarios +==================== + +There are two main scenarios for deploying a Ceph cluster, which impact +how you initially configure Cephx. Most first time Ceph users use +``ceph-deploy`` to create a cluster (easiest). For clusters using +other deployment tools (e.g., Chef, Juju, Puppet, etc.), you will need +to use the manual procedures or configure your deployment tool to +bootstrap your monitor(s). + +ceph-deploy +----------- + +When you deploy a cluster with ``ceph-deploy``, you do not have to bootstrap the +monitor manually or create the ``client.admin`` user or keyring. The steps you +execute in the `Storage Cluster Quick Start`_ will invoke ``ceph-deploy`` to do +that for you. + +When you execute ``ceph-deploy new {initial-monitor(s)}``, Ceph will create a +monitor keyring for you (only used to bootstrap monitors), and it will generate +an initial Ceph configuration file for you, which contains the following +authentication settings, indicating that Ceph enables authentication by +default:: + + auth_cluster_required = cephx + auth_service_required = cephx + auth_client_required = cephx + +When you execute ``ceph-deploy mon create-initial``, Ceph will bootstrap the +initial monitor(s), retrieve a ``ceph.client.admin.keyring`` file containing the +key for the ``client.admin`` user. Additionally, it will also retrieve keyrings +that give ``ceph-deploy`` and ``ceph-volume`` utilities the ability to prepare and +activate OSDs and metadata servers. + +When you execute ``ceph-deploy admin {node-name}`` (**note:** Ceph must be +installed first), you are pushing a Ceph configuration file and the +``ceph.client.admin.keyring`` to the ``/etc/ceph`` directory of the node. You +will be able to execute Ceph administrative functions as ``root`` on the command +line of that node. + + +Manual Deployment +----------------- + +When you deploy a cluster manually, you have to bootstrap the monitor manually +and create the ``client.admin`` user and keyring. To bootstrap monitors, follow +the steps in `Monitor Bootstrapping`_. The steps for monitor bootstrapping are +the logical steps you must perform when using third party deployment tools like +Chef, Puppet, Juju, etc. + + +Enabling/Disabling Cephx +======================== + +Enabling Cephx requires that you have deployed keys for your monitors, +OSDs and metadata servers. If you are simply toggling Cephx on / off, +you do not have to repeat the bootstrapping procedures. + + +Enabling Cephx +-------------- + +When ``cephx`` is enabled, Ceph will look for the keyring in the default search +path, which includes ``/etc/ceph/$cluster.$name.keyring``. You can override +this location by adding a ``keyring`` option in the ``[global]`` section of +your `Ceph configuration`_ file, but this is not recommended. + +Execute the following procedures to enable ``cephx`` on a cluster with +authentication disabled. If you (or your deployment utility) have already +generated the keys, you may skip the steps related to generating keys. + +#. Create a ``client.admin`` key, and save a copy of the key for your client + host:: + + ceph auth get-or-create client.admin mon 'allow *' mds 'allow *' mgr 'allow *' osd 'allow *' -o /etc/ceph/ceph.client.admin.keyring + + **Warning:** This will clobber any existing + ``/etc/ceph/client.admin.keyring`` file. Do not perform this step if a + deployment tool has already done it for you. Be careful! + +#. Create a keyring for your monitor cluster and generate a monitor + secret key. :: + + ceph-authtool --create-keyring /tmp/ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *' + +#. Copy the monitor keyring into a ``ceph.mon.keyring`` file in every monitor's + ``mon data`` directory. For example, to copy it to ``mon.a`` in cluster ``ceph``, + use the following:: + + cp /tmp/ceph.mon.keyring /var/lib/ceph/mon/ceph-a/keyring + +#. Generate a secret key for every MGR, where ``{$id}`` is the MGR letter:: + + ceph auth get-or-create mgr.{$id} mon 'allow profile mgr' mds 'allow *' osd 'allow *' -o /var/lib/ceph/mgr/ceph-{$id}/keyring + +#. Generate a secret key for every OSD, where ``{$id}`` is the OSD number:: + + ceph auth get-or-create osd.{$id} mon 'allow rwx' osd 'allow *' -o /var/lib/ceph/osd/ceph-{$id}/keyring + +#. Generate a secret key for every MDS, where ``{$id}`` is the MDS letter:: + + ceph auth get-or-create mds.{$id} mon 'allow rwx' osd 'allow *' mds 'allow *' mgr 'allow profile mds' -o /var/lib/ceph/mds/ceph-{$id}/keyring + +#. Enable ``cephx`` authentication by setting the following options in the + ``[global]`` section of your `Ceph configuration`_ file:: + + auth cluster required = cephx + auth service required = cephx + auth client required = cephx + + +#. Start or restart the Ceph cluster. See `Operating a Cluster`_ for details. + +For details on bootstrapping a monitor manually, see `Manual Deployment`_. + + + +Disabling Cephx +--------------- + +The following procedure describes how to disable Cephx. If your cluster +environment is relatively safe, you can offset the computation expense of +running authentication. **We do not recommend it.** However, it may be easier +during setup and/or troubleshooting to temporarily disable authentication. + +#. Disable ``cephx`` authentication by setting the following options in the + ``[global]`` section of your `Ceph configuration`_ file:: + + auth cluster required = none + auth service required = none + auth client required = none + + +#. Start or restart the Ceph cluster. See `Operating a Cluster`_ for details. + + +Configuration Settings +====================== + +Enablement +---------- + + +``auth cluster required`` + +:Description: If enabled, the Ceph Storage Cluster daemons (i.e., ``ceph-mon``, + ``ceph-osd``, ``ceph-mds`` and ``ceph-mgr``) must authenticate with + each other. Valid settings are ``cephx`` or ``none``. + +:Type: String +:Required: No +:Default: ``cephx``. + + +``auth service required`` + +:Description: If enabled, the Ceph Storage Cluster daemons require Ceph Clients + to authenticate with the Ceph Storage Cluster in order to access + Ceph services. Valid settings are ``cephx`` or ``none``. + +:Type: String +:Required: No +:Default: ``cephx``. + + +``auth client required`` + +:Description: If enabled, the Ceph Client requires the Ceph Storage Cluster to + authenticate with the Ceph Client. Valid settings are ``cephx`` + or ``none``. + +:Type: String +:Required: No +:Default: ``cephx``. + + +.. index:: keys; keyring + +Keys +---- + +When you run Ceph with authentication enabled, ``ceph`` administrative commands +and Ceph Clients require authentication keys to access the Ceph Storage Cluster. + +The most common way to provide these keys to the ``ceph`` administrative +commands and clients is to include a Ceph keyring under the ``/etc/ceph`` +directory. For Cuttlefish and later releases using ``ceph-deploy``, the filename +is usually ``ceph.client.admin.keyring`` (or ``$cluster.client.admin.keyring``). +If you include the keyring under the ``/etc/ceph`` directory, you don't need to +specify a ``keyring`` entry in your Ceph configuration file. + +We recommend copying the Ceph Storage Cluster's keyring file to nodes where you +will run administrative commands, because it contains the ``client.admin`` key. + +You may use ``ceph-deploy admin`` to perform this task. See `Create an Admin +Host`_ for details. To perform this step manually, execute the following:: + + sudo scp {user}@{ceph-cluster-host}:/etc/ceph/ceph.client.admin.keyring /etc/ceph/ceph.client.admin.keyring + +.. tip:: Ensure the ``ceph.keyring`` file has appropriate permissions set + (e.g., ``chmod 644``) on your client machine. + +You may specify the key itself in the Ceph configuration file using the ``key`` +setting (not recommended), or a path to a keyfile using the ``keyfile`` setting. + + +``keyring`` + +:Description: The path to the keyring file. +:Type: String +:Required: No +:Default: ``/etc/ceph/$cluster.$name.keyring,/etc/ceph/$cluster.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin`` + + +``keyfile`` + +:Description: The path to a key file (i.e,. a file containing only the key). +:Type: String +:Required: No +:Default: None + + +``key`` + +:Description: The key (i.e., the text string of the key itself). Not recommended. +:Type: String +:Required: No +:Default: None + + +Daemon Keyrings +--------------- + +Administrative users or deployment tools (e.g., ``ceph-deploy``) may generate +daemon keyrings in the same way as generating user keyrings. By default, Ceph +stores daemons keyrings inside their data directory. The default keyring +locations, and the capabilities necessary for the daemon to function, are shown +below. + +``ceph-mon`` + +:Location: ``$mon_data/keyring`` +:Capabilities: ``mon 'allow *'`` + +``ceph-osd`` + +:Location: ``$osd_data/keyring`` +:Capabilities: ``mgr 'allow profile osd' mon 'allow profile osd' osd 'allow *'`` + +``ceph-mds`` + +:Location: ``$mds_data/keyring`` +:Capabilities: ``mds 'allow' mgr 'allow profile mds' mon 'allow profile mds' osd 'allow rwx'`` + +``ceph-mgr`` + +:Location: ``$mgr_data/keyring`` +:Capabilities: ``mon 'allow profile mgr' mds 'allow *' osd 'allow *'`` + +``radosgw`` + +:Location: ``$rgw_data/keyring`` +:Capabilities: ``mon 'allow rwx' osd 'allow rwx'`` + + +.. note:: The monitor keyring (i.e., ``mon.``) contains a key but no + capabilities, and is not part of the cluster ``auth`` database. + +The daemon data directory locations default to directories of the form:: + + /var/lib/ceph/$type/$cluster-$id + +For example, ``osd.12`` would be:: + + /var/lib/ceph/osd/ceph-12 + +You can override these locations, but it is not recommended. + + +.. index:: signatures + +Signatures +---------- + +Ceph performs a signature check that provides some limited protection +against messages being tampered with in flight (e.g., by a "man in the +middle" attack). + +Like other parts of Ceph authentication, Ceph provides fine-grained control so +you can enable/disable signatures for service messages between the client and +Ceph, and you can enable/disable signatures for messages between Ceph daemons. + +Note that even with signatures enabled data is not encrypted in +flight. + +``cephx require signatures`` + +:Description: If set to ``true``, Ceph requires signatures on all message + traffic between the Ceph Client and the Ceph Storage Cluster, and + between daemons comprising the Ceph Storage Cluster. + + Ceph Argonaut and Linux kernel versions prior to 3.19 do + not support signatures; if such clients are in use this + option can be turned off to allow them to connect. + +:Type: Boolean +:Required: No +:Default: ``false`` + + +``cephx cluster require signatures`` + +:Description: If set to ``true``, Ceph requires signatures on all message + traffic between Ceph daemons comprising the Ceph Storage Cluster. + +:Type: Boolean +:Required: No +:Default: ``false`` + + +``cephx service require signatures`` + +:Description: If set to ``true``, Ceph requires signatures on all message + traffic between Ceph Clients and the Ceph Storage Cluster. + +:Type: Boolean +:Required: No +:Default: ``false`` + + +``cephx sign messages`` + +:Description: If the Ceph version supports message signing, Ceph will sign + all messages so they are more difficult to spoof. + +:Type: Boolean +:Default: ``true`` + + +Time to Live +------------ + +``auth service ticket ttl`` + +:Description: When the Ceph Storage Cluster sends a Ceph Client a ticket for + authentication, the Ceph Storage Cluster assigns the ticket a + time to live. + +:Type: Double +:Default: ``60*60`` + + +.. _Storage Cluster Quick Start: ../../../start/quick-ceph-deploy/ +.. _Monitor Bootstrapping: ../../../install/manual-deployment#monitor-bootstrapping +.. _Operating a Cluster: ../../operations/operating +.. _Manual Deployment: ../../../install/manual-deployment +.. _Ceph configuration: ../ceph-conf +.. _Create an Admin Host: ../../deployment/ceph-deploy-admin +.. _Architecture - High Availability Authentication: ../../../architecture#high-availability-authentication +.. _User Management: ../../operations/user-management |