summaryrefslogtreecommitdiffstats
path: root/doc/rbd/iscsi-target-cli-manual-install.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/rbd/iscsi-target-cli-manual-install.rst')
-rw-r--r--doc/rbd/iscsi-target-cli-manual-install.rst190
1 files changed, 190 insertions, 0 deletions
diff --git a/doc/rbd/iscsi-target-cli-manual-install.rst b/doc/rbd/iscsi-target-cli-manual-install.rst
new file mode 100644
index 00000000..ccc422e0
--- /dev/null
+++ b/doc/rbd/iscsi-target-cli-manual-install.rst
@@ -0,0 +1,190 @@
+==============================
+Manual ceph-iscsi Installation
+==============================
+
+**Requirements**
+
+To complete the installation of ceph-iscsi, there are 4 steps:
+
+1. Install common packages from your Linux distribution's software repository
+2. Install Git to fetch the remaining packages directly from their Git repositories
+3. Ensure a compatible kernel is used
+4. Install all the components of ceph-iscsi and start associated daemons:
+
+ - tcmu-runner
+ - rtslib-fb
+ - configshell-fb
+ - targetcli-fb
+ - ceph-iscsi
+
+
+1. Install Common Packages
+==========================
+
+The following packages will be used by ceph-iscsi and target tools.
+They must be installed from your Linux distribution's software repository
+on each machine that will be a iSCSI gateway:
+
+- libnl3
+- libkmod
+- librbd1
+- pyparsing
+- python kmod
+- python pyudev
+- python gobject
+- python urwid
+- python pyparsing
+- python rados
+- python rbd
+- python netifaces
+- python crypto
+- python requests
+- python flask
+- pyOpenSSL
+
+
+2. Install Git
+==============
+
+In order to install all the packages needed to run iSCSI with Ceph, you need to download them directly from their repository by using Git.
+On CentOS/RHEL execute:
+
+::
+
+ > sudo yum install git
+
+On Debian/Ubuntu execute:
+
+::
+
+ > sudo apt install git
+
+To know more about Git and how it works, please, visit https://git-scm.com
+
+
+3. Ensure a compatible kernel is used
+=====================================
+
+Ensure you use a supported kernel that contains the required Ceph iSCSI patches:
+
+- all Linux distribution with a kernel v4.16 or newer, or
+- Red Hat Enterprise Linux or CentOS 7.5 or later (in these distributions ceph-iscsi support is backported)
+
+If you are already using a compatible kernel, you can go to next step.
+However, if you are NOT using a compatible kernel then check your distro's
+documentation for specific instructions on how to build this kernel. The only
+Ceph iSCSI specific requirements are that the following build options must be
+enabled:
+
+ ::
+
+ CONFIG_TARGET_CORE=m
+ CONFIG_TCM_USER2=m
+ CONFIG_ISCSI_TARGET=m
+
+
+4. Install ceph-iscsi
+========================================================
+
+Finally, the remaining tools can be fetched directly from their Git repositories and their associated services started
+
+
+tcmu-runner
+-----------
+
+ Installation:
+
+ ::
+
+ > git clone https://github.com/open-iscsi/tcmu-runner
+ > cd tcmu-runner
+
+ Run the following command to install all the needed dependencies:
+
+ ::
+
+ > ./extra/install_dep.sh
+
+ Now you can build the tcmu-runner.
+ To do so, use the following build command:
+
+ ::
+
+ > cmake -Dwith-glfs=false -Dwith-qcow=false -DSUPPORT_SYSTEMD=ON -DCMAKE_INSTALL_PREFIX=/usr
+ > make install
+
+ Enable and start the daemon:
+
+ ::
+
+ > systemctl daemon-reload
+ > systemctl enable tcmu-runner
+ > systemctl start tcmu-runner
+
+
+rtslib-fb
+---------
+
+ Installation:
+
+ ::
+
+ > git clone https://github.com/open-iscsi/rtslib-fb.git
+ > cd rtslib-fb
+ > python setup.py install
+
+configshell-fb
+--------------
+
+ Installation:
+
+ ::
+
+ > git clone https://github.com/open-iscsi/configshell-fb.git
+ > cd configshell-fb
+ > python setup.py install
+
+targetcli-fb
+------------
+
+ Installation:
+
+ ::
+
+ > git clone https://github.com/open-iscsi/targetcli-fb.git
+ > cd targetcli-fb
+ > python setup.py install
+ > mkdir /etc/target
+ > mkdir /var/target
+
+ .. warning:: The ceph-iscsi tools assume they are managing all targets
+ on the system. If targets have been setup and are being managed by
+ targetcli the target service must be disabled.
+
+ceph-iscsi
+-----------------
+
+ Installation:
+
+ ::
+
+ > git clone https://github.com/ceph/ceph-iscsi.git
+ > cd ceph-iscsi
+ > python setup.py install --install-scripts=/usr/bin
+ > cp usr/lib/systemd/system/rbd-target-gw.service /lib/systemd/system
+ > cp usr/lib/systemd/system/rbd-target-api.service /lib/systemd/system
+
+ Enable and start the daemon:
+
+ ::
+
+ > systemctl daemon-reload
+ > systemctl enable rbd-target-gw
+ > systemctl start rbd-target-gw
+ > systemctl enable rbd-target-api
+ > systemctl start rbd-target-api
+
+Installation is complete. Proceed to the setup section in the
+`main ceph-iscsi CLI page`_.
+
+.. _`main ceph-iscsi CLI page`: ../iscsi-target-cli