diff options
Diffstat (limited to '')
| -rw-r--r-- | qa/run_xfstests-obsolete.sh | 458 |
1 files changed, 458 insertions, 0 deletions
diff --git a/qa/run_xfstests-obsolete.sh b/qa/run_xfstests-obsolete.sh new file mode 100644 index 00000000..4393c7c8 --- /dev/null +++ b/qa/run_xfstests-obsolete.sh @@ -0,0 +1,458 @@ +#!/usr/bin/env bash + +# Copyright (C) 2012 Dreamhost, LLC +# +# This is free software; see the source for copying conditions. +# There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR +# A PARTICULAR PURPOSE. +# +# This is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as +# published by the Free Software Foundation version 2. + +# Usage: +# run_xfs_tests -t /dev/<testdev> -s /dev/<scratchdev> -f <fstype> <tests> +# - test device and scratch device will both get trashed +# - fstypes can be xfs, ext4, or btrfs (xfs default) +# - tests can be listed individually or in ranges: 1 3-5 8 +# tests can also be specified by group: -g quick +# +# Exit status: +# 0: success +# 1: usage error +# 2: other runtime error +# 99: argument count error (programming error) +# 100: getopt error (internal error) + +# Alex Elder <elder@dreamhost.com> +# April 13, 2012 + +set -e + +PROGNAME=$(basename $0) + +# xfstests is downloaded from this git repository and then built. +# XFSTESTS_REPO="git://oss.sgi.com/xfs/cmds/xfstests.git" +XFSTESTS_REPO="git://git.ceph.com/xfstests.git" + +# Default command line option values +COUNT="1" +FS_TYPE="xfs" +SCRATCH_DEV="" # MUST BE SPECIFIED +TEST_DEV="" # MUST BE SPECIFIED +TESTS="-g auto" # The "auto" group is supposed to be "known good" + +# rbd presents geometry information that causes mkfs.xfs to +# issue a warning. This option avoids this class of problems. +XFS_MKFS_OPTIONS="-l su=32k" + +# Override the default test list with a list of tests known to pass +# until we can work through getting them all passing reliably. +TESTS="1-7 9 11-15 17 19-21 26-29 31-34 41 46-48 50-54 56 61 63-67 69-70 74-76" +TESTS="${TESTS} 78 79 84-89 91-92 100 103 105 108 110 116-121 124 126" +TESTS="${TESTS} 129-135 137-141 164-167 182 184 187-190 192 194" +TESTS="${TESTS} 196 199 201 203 214-216 220-227 234 236-238 241 243-249" +TESTS="${TESTS} 253 257-259 261 262 269 273 275 277 278 280 285 286" +# 275 was the highest available test as of 4/10/12. +# 289 was the highest available test as of 11/15/12. + +###### +# Some explanation of why tests have been excluded above: +# +# Test 008 was pulled because it contained a race condition leading to +# spurious failures. +# +# Test 049 was pulled because it caused a kernel fault. +# http://tracker.newdream.net/issues/2260 +# Test 232 was pulled because it caused an XFS error +# http://tracker.newdream.net/issues/2302 +# +# This test passes but takes a LONG time (1+ hours): 127 +# +# These were not run for one (anticipated) reason or another: +# 010 016 030 035 040 044 057 058-060 072 077 090 093-095 097-099 104 +# 112 113 122 123 125 128 142 147-163 168 175-178 180 185 191 193 +# 195 197 198 207-213 217 228 230-233 235 239 240 252 254 255 264-266 +# 270-272 276 278-279 281-284 288 289 +# +# These tests all failed (produced output different from golden): +# 042 073 083 096 109 169 170 200 202 204-206 218 229 240 242 250 +# 263 276 277 279 287 +# +# The rest were not part of the "auto" group: +# 018 022 023 024 025 036 037 038 039 043 055 071 080 081 082 101 +# 102 106 107 111 114 115 136 171 172 173 251 267 268 +###### + +# print an error message and quit with non-zero status +function err() { + if [ $# -gt 0 ]; then + echo "" >&2 + echo "${PROGNAME}: ${FUNCNAME[1]}: $@" >&2 + fi + exit 2 +} + +# routine used to validate argument counts to all shell functions +function arg_count() { + local func + local want + local got + + if [ $# -eq 2 ]; then + func="${FUNCNAME[1]}" # calling function + want=$1 + got=$2 + else + func="${FUNCNAME[0]}" # i.e., arg_count + want=2 + got=$# + fi + [ "${want}" -eq "${got}" ] && return 0 + echo "${PROGNAME}: ${func}: arg count bad (want ${want} got ${got})" >&2 + exit 99 +} + +# validation function for repeat count argument +function count_valid() { + arg_count 1 $# + + test "$1" -gt 0 # 0 is pointless; negative is wrong +} + +# validation function for filesystem type argument +function fs_type_valid() { + arg_count 1 $# + + case "$1" in + xfs|ext4|btrfs) return 0 ;; + *) return 1 ;; + esac +} + +# validation function for device arguments +function device_valid() { + arg_count 1 $# + + # Very simple testing--really should try to be more careful... + test -b "$1" +} + +# print a usage message and quit +# +# if a message is supplied, print that first, and then exit +# with non-zero status +function usage() { + if [ $# -gt 0 ]; then + echo "" >&2 + echo "$@" >&2 + fi + + echo "" >&2 + echo "Usage: ${PROGNAME} <options> <tests>" >&2 + echo "" >&2 + echo " options:" >&2 + echo " -h or --help" >&2 + echo " show this message" >&2 + echo " -c or --count" >&2 + echo " iteration count (1 or more)" >&2 + echo " -f or --fs-type" >&2 + echo " one of: xfs, ext4, btrfs" >&2 + echo " (default fs-type: xfs)" >&2 + echo " -s or --scratch-dev (REQUIRED)" >&2 + echo " name of device used for scratch filesystem" >&2 + echo " -t or --test-dev (REQUIRED)" >&2 + echo " name of device used for test filesystem" >&2 + echo " tests:" >&2 + echo " list of test numbers or ranges, e.g.:" >&2 + echo " 1-9 11-15 17 19-21 26-28 31-34 41" >&2 + echo " or possibly an xfstests test group, e.g.:" >&2 + echo " -g quick" >&2 + echo " (default tests: -g auto)" >&2 + echo "" >&2 + + [ $# -gt 0 ] && exit 1 + + exit 0 # This is used for a --help +} + +# parse command line arguments +function parseargs() { + # Short option flags + SHORT_OPTS="" + SHORT_OPTS="${SHORT_OPTS},h" + SHORT_OPTS="${SHORT_OPTS},c:" + SHORT_OPTS="${SHORT_OPTS},f:" + SHORT_OPTS="${SHORT_OPTS},s:" + SHORT_OPTS="${SHORT_OPTS},t:" + + # Short option flags + LONG_OPTS="" + LONG_OPTS="${LONG_OPTS},help" + LONG_OPTS="${LONG_OPTS},count:" + LONG_OPTS="${LONG_OPTS},fs-type:" + LONG_OPTS="${LONG_OPTS},scratch-dev:" + LONG_OPTS="${LONG_OPTS},test-dev:" + + TEMP=$(getopt --name "${PROGNAME}" \ + --options "${SHORT_OPTS}" \ + --longoptions "${LONG_OPTS}" \ + -- "$@") + eval set -- "$TEMP" + + while [ "$1" != "--" ]; do + case "$1" in + -h|--help) + usage + ;; + -c|--count) + count_valid "$2" || + usage "invalid count '$2'" + COUNT="$2" + shift + ;; + -f|--fs-type) + fs_type_valid "$2" || + usage "invalid fs_type '$2'" + FS_TYPE="$2" + shift + ;; + -s|--scratch-dev) + device_valid "$2" || + usage "invalid scratch-dev '$2'" + SCRATCH_DEV="$2" + shift + ;; + -t|--test-dev) + device_valid "$2" || + usage "invalid test-dev '$2'" + TEST_DEV="$2" + shift + ;; + *) + exit 100 # Internal error + ;; + esac + shift + done + shift + + [ -n "${TEST_DEV}" ] || usage "test-dev must be supplied" + [ -n "${SCRATCH_DEV}" ] || usage "scratch-dev must be supplied" + + [ $# -eq 0 ] || TESTS="$@" +} + +################################################################ + +[ -z "$TESTDIR" ] && export TESTDIR="/tmp/cephtest" + +# Set up some environment for normal teuthology test setup. +# This really should not be necessary but I found it was. +export CEPH_ARGS="--conf ${TESTDIR}/ceph.conf" +export CEPH_ARGS="${CEPH_ARGS} --keyring ${TESTDIR}/data/client.0.keyring" +export CEPH_ARGS="${CEPH_ARGS} --name client.0" + +export LD_LIBRARY_PATH="${TESTDIR}/binary/usr/local/lib:${LD_LIBRARY_PATH}" +export PATH="${TESTDIR}/binary/usr/local/bin:${PATH}" +export PATH="${TESTDIR}/binary/usr/local/sbin:${PATH}" + +################################################################ + +# Filesystem-specific mkfs options--set if not supplied +export XFS_MKFS_OPTIONS="${XFS_MKFS_OPTIONS:--f -l su=65536}" +export EXT4_MKFS_OPTIONS="${EXT4_MKFS_OPTIONS:--F}" +export BTRFS_MKFS_OPTION # No defaults + +XFSTESTS_DIR="/var/lib/xfstests" # Where the tests live + +# download, build, and install xfstests +function install_xfstests() { + arg_count 0 $# + + local multiple="" + local ncpu + + pushd "${TESTDIR}" + + git clone "${XFSTESTS_REPO}" + + cd xfstests + + # FIXME: use an older version before the tests were rearranged! + git reset --hard e5f1a13792f20cfac097fef98007610b422f2cac + + ncpu=$(getconf _NPROCESSORS_ONLN 2>&1) + [ -n "${ncpu}" -a "${ncpu}" -gt 1 ] && multiple="-j ${ncpu}" + + make realclean + make ${multiple} + make -k install + + popd +} + +# remove previously-installed xfstests files +function remove_xfstests() { + arg_count 0 $# + + rm -rf "${TESTDIR}/xfstests" + rm -rf "${XFSTESTS_DIR}" +} + +# create a host options file that uses the specified devices +function setup_host_options() { + arg_count 0 $# + + # Create mount points for the test and scratch filesystems + local test_dir="$(mktemp -d ${TESTDIR}/test_dir.XXXXXXXXXX)" + local scratch_dir="$(mktemp -d ${TESTDIR}/scratch_mnt.XXXXXXXXXX)" + + # Write a host options file that uses these devices. + # xfstests uses the file defined by HOST_OPTIONS as the + # place to get configuration variables for its run, and + # all (or most) of the variables set here are required. + export HOST_OPTIONS="$(mktemp ${TESTDIR}/host_options.XXXXXXXXXX)" + cat > "${HOST_OPTIONS}" <<-! + # Created by ${PROGNAME} on $(date) + # HOST_OPTIONS="${HOST_OPTIONS}" + TEST_DEV="${TEST_DEV}" + SCRATCH_DEV="${SCRATCH_DEV}" + TEST_DIR="${test_dir}" + SCRATCH_MNT="${scratch_dir}" + FSTYP="${FS_TYPE}" + export TEST_DEV SCRATCH_DEV TEST_DIR SCRATCH_MNT FSTYP + # + export XFS_MKFS_OPTIONS="${XFS_MKFS_OPTIONS}" + ! + + # Now ensure we are using the same values + . "${HOST_OPTIONS}" +} + +# remove the host options file, plus the directories it refers to +function cleanup_host_options() { + arg_count 0 $# + + rm -rf "${TEST_DIR}" "${SCRATCH_MNT}" + rm -f "${HOST_OPTIONS}" +} + +# run mkfs on the given device using the specified filesystem type +function do_mkfs() { + arg_count 1 $# + + local dev="${1}" + local options + + case "${FSTYP}" in + xfs) options="${XFS_MKFS_OPTIONS}" ;; + ext4) options="${EXT4_MKFS_OPTIONS}" ;; + btrfs) options="${BTRFS_MKFS_OPTIONS}" ;; + esac + + "mkfs.${FSTYP}" ${options} "${dev}" || + err "unable to make ${FSTYP} file system on device \"${dev}\"" +} + +# mount the given device on the given mount point +function do_mount() { + arg_count 2 $# + + local dev="${1}" + local dir="${2}" + + mount "${dev}" "${dir}" || + err "unable to mount file system \"${dev}\" on \"${dir}\"" +} + +# unmount a previously-mounted device +function do_umount() { + arg_count 1 $# + + local dev="${1}" + + if mount | grep "${dev}" > /dev/null; then + if ! umount "${dev}"; then + err "unable to unmount device \"${dev}\"" + fi + else + # Report it but don't error out + echo "device \"${dev}\" was not mounted" >&2 + fi +} + +# do basic xfstests setup--make and mount the test and scratch filesystems +function setup_xfstests() { + arg_count 0 $# + + # TEST_DEV can persist across test runs, but for now we + # don't bother. I believe xfstests prefers its devices to + # have been already been formatted for the desired + # filesystem type--it uses blkid to identify things or + # something. So we mkfs both here for a fresh start. + do_mkfs "${TEST_DEV}" + do_mkfs "${SCRATCH_DEV}" + + # I believe the test device is expected to be mounted; the + # scratch doesn't need to be (but it doesn't hurt). + do_mount "${TEST_DEV}" "${TEST_DIR}" + do_mount "${SCRATCH_DEV}" "${SCRATCH_MNT}" +} + +# clean up changes made by setup_xfstests +function cleanup_xfstests() { + arg_count 0 $# + + # Unmount these in case a test left them mounted (plus + # the corresponding setup function mounted them...) + do_umount "${TEST_DEV}" + do_umount "${SCRATCH_DEV}" +} + +# top-level setup routine +function setup() { + arg_count 0 $# + + setup_host_options + install_xfstests + setup_xfstests +} + +# top-level (final) cleanup routine +function cleanup() { + arg_count 0 $# + + cd / + cleanup_xfstests + remove_xfstests + cleanup_host_options +} +trap cleanup EXIT ERR HUP INT QUIT + +# ################################################################ + +start_date="$(date)" + +parseargs "$@" + +setup + +pushd "${XFSTESTS_DIR}" +for (( i = 1 ; i <= "${COUNT}" ; i++ )); do + [ "${COUNT}" -gt 1 ] && echo "=== Iteration "$i" starting at: $(date)" + + ./check ${TESTS} # Here we actually run the tests + status=$? + + [ "${COUNT}" -gt 1 ] && echo "=== Iteration "$i" complete at: $(date)" +done +popd + +# cleanup is called via the trap call, above + +echo "This xfstests run started at: ${start_date}" +echo "xfstests run completed at: $(date)" +[ "${COUNT}" -gt 1 ] && echo "xfstests run consisted of ${COUNT} iterations" + +exit "${status}" |