diff options
Diffstat (limited to '')
-rw-r--r-- | qa/tasks/osd_failsafe_enospc.py | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/qa/tasks/osd_failsafe_enospc.py b/qa/tasks/osd_failsafe_enospc.py new file mode 100644 index 00000000..4b2cdb98 --- /dev/null +++ b/qa/tasks/osd_failsafe_enospc.py @@ -0,0 +1,219 @@ +""" +Handle osdfailsafe configuration settings (nearfull ratio and full ratio) +""" +from io import BytesIO +import logging +import six +import time + +from teuthology.orchestra import run +from tasks.util.rados import rados +from teuthology import misc as teuthology + +log = logging.getLogger(__name__) + +def task(ctx, config): + """ + Test handling of osd_failsafe_nearfull_ratio and osd_failsafe_full_ratio + configuration settings + + In order for test to pass must use log-whitelist as follows + + tasks: + - chef: + - install: + - ceph: + log-whitelist: ['OSD near full', 'OSD full dropping all updates'] + - osd_failsafe_enospc: + + """ + if config is None: + config = {} + assert isinstance(config, dict), \ + 'osd_failsafe_enospc task only accepts a dict for configuration' + + # Give 2 seconds for injectargs + osd_op_complaint_time (30) + 2 * osd_heartbeat_interval (6) + 6 padding + sleep_time = 50 + + # something that is always there + dummyfile = '/etc/fstab' + dummyfile2 = '/etc/resolv.conf' + + manager = ctx.managers['ceph'] + + # create 1 pg pool with 1 rep which can only be on osd.0 + osds = manager.get_osd_dump() + for osd in osds: + if osd['osd'] != 0: + manager.mark_out_osd(osd['osd']) + + log.info('creating pool foo') + manager.create_pool("foo") + manager.raw_cluster_cmd('osd', 'pool', 'set', 'foo', 'size', '1') + + # State NONE -> NEAR + log.info('1. Verify warning messages when exceeding nearfull_ratio') + + first_mon = teuthology.get_first_mon(ctx, config) + (mon,) = ctx.cluster.only(first_mon).remotes.keys() + + proc = mon.run( + args=[ + 'sudo', + 'daemon-helper', + 'kill', + 'ceph', '-w' + ], + stdin=run.PIPE, + stdout=BytesIO(), + wait=False, + ) + + manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_nearfull_ratio .00001') + + time.sleep(sleep_time) + proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w + proc.wait() + + lines = six.ensure_str(proc.stdout.getvalue()).split('\n') + + count = len(filter(lambda line: '[WRN] OSD near full' in line, lines)) + assert count == 2, 'Incorrect number of warning messages expected 2 got %d' % count + count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines)) + assert count == 0, 'Incorrect number of error messages expected 0 got %d' % count + + # State NEAR -> FULL + log.info('2. Verify error messages when exceeding full_ratio') + + proc = mon.run( + args=[ + 'sudo', + 'daemon-helper', + 'kill', + 'ceph', '-w' + ], + stdin=run.PIPE, + stdout=BytesIO(), + wait=False, + ) + + manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_full_ratio .00001') + + time.sleep(sleep_time) + proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w + proc.wait() + + lines = six.ensure_str(proc.stdout.getvalue()).split('\n') + + count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines)) + assert count == 2, 'Incorrect number of error messages expected 2 got %d' % count + + log.info('3. Verify write failure when exceeding full_ratio') + + # Write data should fail + ret = rados(ctx, mon, ['-p', 'foo', 'put', 'newfile1', dummyfile]) + assert ret != 0, 'Expected write failure but it succeeded with exit status 0' + + # Put back default + manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_full_ratio .97') + time.sleep(10) + + # State FULL -> NEAR + log.info('4. Verify write success when NOT exceeding full_ratio') + + # Write should succeed + ret = rados(ctx, mon, ['-p', 'foo', 'put', 'newfile2', dummyfile2]) + assert ret == 0, 'Expected write to succeed, but got exit status %d' % ret + + log.info('5. Verify warning messages again when exceeding nearfull_ratio') + + proc = mon.run( + args=[ + 'sudo', + 'daemon-helper', + 'kill', + 'ceph', '-w' + ], + stdin=run.PIPE, + stdout=BytesIO(), + wait=False, + ) + + time.sleep(sleep_time) + proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w + proc.wait() + + lines = six.ensure_str(proc.stdout.getvalue()).split('\n') + + count = len(filter(lambda line: '[WRN] OSD near full' in line, lines)) + assert count == 1 or count == 2, 'Incorrect number of warning messages expected 1 or 2 got %d' % count + count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines)) + assert count == 0, 'Incorrect number of error messages expected 0 got %d' % count + + manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_nearfull_ratio .90') + time.sleep(10) + + # State NONE -> FULL + log.info('6. Verify error messages again when exceeding full_ratio') + + proc = mon.run( + args=[ + 'sudo', + 'daemon-helper', + 'kill', + 'ceph', '-w' + ], + stdin=run.PIPE, + stdout=BytesIO(), + wait=False, + ) + + manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_full_ratio .00001') + + time.sleep(sleep_time) + proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w + proc.wait() + + lines = six.ensure_str(proc.stdout.getvalue()).split('\n') + + count = len(filter(lambda line: '[WRN] OSD near full' in line, lines)) + assert count == 0, 'Incorrect number of warning messages expected 0 got %d' % count + count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines)) + assert count == 2, 'Incorrect number of error messages expected 2 got %d' % count + + # State FULL -> NONE + log.info('7. Verify no messages settings back to default') + + manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_full_ratio .97') + time.sleep(10) + + proc = mon.run( + args=[ + 'sudo', + 'daemon-helper', + 'kill', + 'ceph', '-w' + ], + stdin=run.PIPE, + stdout=BytesIO(), + wait=False, + ) + + time.sleep(sleep_time) + proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w + proc.wait() + + lines = six.ensure_str(proc.stdout.getvalue()).split('\n') + + count = len(filter(lambda line: '[WRN] OSD near full' in line, lines)) + assert count == 0, 'Incorrect number of warning messages expected 0 got %d' % count + count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines)) + assert count == 0, 'Incorrect number of error messages expected 0 got %d' % count + + log.info('Test Passed') + + # Bring all OSDs back in + manager.remove_pool("foo") + for osd in osds: + if osd['osd'] != 0: + manager.mark_in_osd(osd['osd']) |