diff options
Diffstat (limited to 'src/c-ares/m4/ax_code_coverage.m4')
| -rw-r--r-- | src/c-ares/m4/ax_code_coverage.m4 | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/src/c-ares/m4/ax_code_coverage.m4 b/src/c-ares/m4/ax_code_coverage.m4 new file mode 100644 index 00000000..5120c3bb --- /dev/null +++ b/src/c-ares/m4/ax_code_coverage.m4 @@ -0,0 +1,219 @@ +# =========================================================================== +# http://www.gnu.org/software/autoconf-archive/ax_code_coverage.html +# =========================================================================== +# +# SYNOPSIS +# +# AX_CODE_COVERAGE() +# +# DESCRIPTION +# +# Defines CODE_COVERAGE_CFLAGS and CODE_COVERAGE_LDFLAGS which should be +# included in the CFLAGS and LIBS/LDFLAGS variables of every build target +# (program or library) which should be built with code coverage support. +# Also defines CODE_COVERAGE_RULES which should be substituted in your +# Makefile; and $enable_code_coverage which can be used in subsequent +# configure output. CODE_COVERAGE_ENABLED is defined and substituted, and +# corresponds to the value of the --enable-code-coverage option, which +# defaults to being disabled. +# +# Test also for gcov program and create GCOV variable that could be +# substituted. +# +# Note that all optimisation flags in CFLAGS must be disabled when code +# coverage is enabled. +# +# Usage example: +# +# configure.ac: +# +# AX_CODE_COVERAGE +# +# Makefile.am: +# +# @CODE_COVERAGE_RULES@ +# my_program_LIBS = ... $(CODE_COVERAGE_LDFLAGS) ... +# my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ... +# +# This results in a "check-code-coverage" rule being added to any +# Makefile.am which includes "@CODE_COVERAGE_RULES@" (assuming the module +# has been configured with --enable-code-coverage). Running `make +# check-code-coverage` in that directory will run the module's test suite +# (`make check`) and build a code coverage report detailing the code which +# was touched, then print the URI for the report. +# +# This code was derived from Makefile.decl in GLib, originally licenced +# under LGPLv2.1+. +# +# LICENSE +# +# Copyright (c) 2012 Philip Withnall +# Copyright (c) 2012 Xan Lopez +# Copyright (c) 2012 Christian Persch +# Copyright (c) 2012 Paolo Borelli +# Copyright (c) 2012 Dan Winship +# Copyright (c) 2015 Bastien ROUCARIES +# +# This library is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or (at +# your option) any later version. +# +# This library is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +#serial 5 + +AC_DEFUN([AX_CODE_COVERAGE],[ + dnl Check for --enable-code-coverage + AC_REQUIRE([AC_PROG_SED]) + + # allow to override gcov location + AC_ARG_WITH([gcov], + [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])], + [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov], + [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov]) + + AC_MSG_CHECKING([whether to build with code coverage support]) + AC_ARG_ENABLE([code-coverage], + AS_HELP_STRING([--enable-code-coverage], + [Whether to enable code coverage support]),, + enable_code_coverage=no) + + AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes]) + AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage]) + AC_MSG_RESULT($enable_code_coverage) + + AS_IF([ test "$enable_code_coverage" = "yes" ], [ + # check for gcov + AC_CHECK_TOOL([GCOV], + [$_AX_CODE_COVERAGE_GCOV_PROG_WITH], + [:]) + AS_IF([test "X$GCOV" = "X:"], + [AC_MSG_ERROR([gcov is needed to do coverage])]) + AC_SUBST([GCOV]) + + dnl Check if gcc is being used + AS_IF([ test "$GCC" = "no" ], [ + AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage]) + ]) + + # List of supported lcov versions. + lcov_version_list="1.6 1.7 1.8 1.9 1.10 1.11" + + AC_CHECK_PROG([LCOV], [lcov], [lcov]) + AC_CHECK_PROG([GENHTML], [genhtml], [genhtml]) + + AS_IF([ test "$LCOV" ], [ + AC_CACHE_CHECK([for lcov version], ax_cv_lcov_version, [ + ax_cv_lcov_version=invalid + lcov_version=`$LCOV -v 2>/dev/null | $SED -e 's/^.* //'` + for lcov_check_version in $lcov_version_list; do + if test "$lcov_version" = "$lcov_check_version"; then + ax_cv_lcov_version="$lcov_check_version (ok)" + fi + done + ]) + ], [ + lcov_msg="To enable code coverage reporting you must have one of the following lcov versions installed: $lcov_version_list" + AC_MSG_ERROR([$lcov_msg]) + ]) + + case $ax_cv_lcov_version in + ""|invalid[)] + lcov_msg="You must have one of the following versions of lcov: $lcov_version_list (found: $lcov_version)." + AC_MSG_ERROR([$lcov_msg]) + LCOV="exit 0;" + ;; + esac + + AS_IF([ test -z "$GENHTML" ], [ + AC_MSG_ERROR([Could not find genhtml from the lcov package]) + ]) + + dnl Build the code coverage flags + CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" + CODE_COVERAGE_LDFLAGS="-lgcov" + + AC_SUBST([CODE_COVERAGE_CFLAGS]) + AC_SUBST([CODE_COVERAGE_LDFLAGS]) + +CODE_COVERAGE_RULES=' +# Code coverage +# +# Optional: +# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. +# (Default: $(top_builddir)) +# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated +# by lcov for code coverage. (Default: +# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info) +# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage +# reports to be created. (Default: +# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage) +# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov +# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the lcov instance. +# (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) +# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the lcov instance. +# (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) +# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml +# instance. (Default: empty) +# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore +# +# The generated report will be titled using the $(PACKAGE_NAME) and +# $(PACKAGE_VERSION). In order to add the current git hash to the title, +# use the git-version-gen script, available online. + +# Optional variables +CODE_COVERAGE_DIRECTORY ?= $(top_builddir) +CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info +CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage +CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)" +CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) +CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) +CODE_COVERAGE_GENHTML_OPTIONS ?= +CODE_COVERAGE_IGNORE_PATTERN ?= + +code_coverage_quiet = $(code_coverage_quiet_$(V)) +code_coverage_quiet_ = +code_coverage_quiet_0 = --quiet + +# Use recursive makes in order to ignore errors during check +check-code-coverage: + -$(MAKE) $(AM_MAKEFLAGS) -k check + $(MAKE) $(AM_MAKEFLAGS) code-coverage-capture + +# Capture code coverage data +code-coverage-capture: code-coverage-capture-hook + $(LCOV) $(code_coverage_quiet) --directory $(CODE_COVERAGE_DIRECTORY) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_OPTIONS) + $(LCOV) $(code_coverage_quiet) --directory $(CODE_COVERAGE_DIRECTORY) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" + -@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp + LANG=C $(GENHTML) $(code_coverage_quiet) --prefix $(CODE_COVERAGE_DIRECTORY) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS) + @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html" + +# Hook rule executed before code-coverage-capture, overridable by the user +code-coverage-capture-hook: + +clean: code-coverage-clean +code-coverage-clean: + -$(LCOV) --directory $(top_builddir) -z + -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY) + -find . -name "*.gcda" -o -name "*.gcov" -delete + +GITIGNOREFILES ?= +GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY) + +DISTCHECK_CONFIGURE_FLAGS ?= +DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage + +.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean +' + AC_SUBST([CODE_COVERAGE_RULES]) + ]) + + m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([CODE_COVERAGE_RULES])]) +]) |