diff options
Diffstat (limited to '')
| -rwxr-xr-x | src/spdk/dpdk/usertools/dpdk-setup.sh | 605 |
1 files changed, 605 insertions, 0 deletions
diff --git a/src/spdk/dpdk/usertools/dpdk-setup.sh b/src/spdk/dpdk/usertools/dpdk-setup.sh new file mode 100755 index 00000000..5eebbce8 --- /dev/null +++ b/src/spdk/dpdk/usertools/dpdk-setup.sh @@ -0,0 +1,605 @@ +#! /bin/bash +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2010-2014 Intel Corporation + +# +# Run with "source /path/to/dpdk-setup.sh" +# + +# +# Change to DPDK directory ( <this-script's-dir>/.. ), and export it as RTE_SDK +# +cd $(dirname ${BASH_SOURCE[0]})/.. +export RTE_SDK=$PWD +echo "------------------------------------------------------------------------------" +echo " RTE_SDK exported as $RTE_SDK" +echo "------------------------------------------------------------------------------" + +HUGEPGSZ=`cat /proc/meminfo | grep Hugepagesize | cut -d : -f 2 | tr -d ' '` + +# +# Application EAL parameters for setting memory options (amount/channels/ranks). +# +EAL_PARAMS='-n 4' + +# +# Sets QUIT variable so script will finish. +# +quit() +{ + QUIT=$1 +} + +# Shortcut for quit. +q() +{ + quit +} + +# +# Sets up environmental variables for ICC. +# +setup_icc() +{ + DEFAULT_PATH=/opt/intel/bin/iccvars.sh + param=$1 + shpath=`which iccvars.sh 2> /dev/null` + if [ $? -eq 0 ] ; then + echo "Loading iccvars.sh from $shpath for $param" + source $shpath $param + elif [ -f $DEFAULT_PATH ] ; then + echo "Loading iccvars.sh from $DEFAULT_PATH for $param" + source $DEFAULT_PATH $param + else + echo "## ERROR: cannot find 'iccvars.sh' script to set up ICC." + echo "## To fix, please add the directory that contains" + echo "## iccvars.sh to your 'PATH' environment variable." + quit + fi +} + +# +# Sets RTE_TARGET and does a "make install". +# +setup_target() +{ + option=$1 + export RTE_TARGET=${TARGETS[option]} + + compiler=${RTE_TARGET##*-} + if [ "$compiler" == "icc" ] ; then + platform=${RTE_TARGET%%-*} + if [ "$platform" == "x86_64" ] ; then + setup_icc intel64 + else + setup_icc ia32 + fi + fi + if [ "$QUIT" == "0" ] ; then + make install T=${RTE_TARGET} + fi + echo "------------------------------------------------------------------------------" + echo " RTE_TARGET exported as $RTE_TARGET" + echo "------------------------------------------------------------------------------" +} + +# +# Creates hugepage filesystem. +# +create_mnt_huge() +{ + echo "Creating /mnt/huge and mounting as hugetlbfs" + sudo mkdir -p /mnt/huge + + grep -s '/mnt/huge' /proc/mounts > /dev/null + if [ $? -ne 0 ] ; then + sudo mount -t hugetlbfs nodev /mnt/huge + fi +} + +# +# Removes hugepage filesystem. +# +remove_mnt_huge() +{ + echo "Unmounting /mnt/huge and removing directory" + grep -s '/mnt/huge' /proc/mounts > /dev/null + if [ $? -eq 0 ] ; then + sudo umount /mnt/huge + fi + + if [ -d /mnt/huge ] ; then + sudo rm -R /mnt/huge + fi +} + +# +# Unloads igb_uio.ko. +# +remove_igb_uio_module() +{ + echo "Unloading any existing DPDK UIO module" + /sbin/lsmod | grep -s igb_uio > /dev/null + if [ $? -eq 0 ] ; then + sudo /sbin/rmmod igb_uio + fi +} + +# +# Loads new igb_uio.ko (and uio module if needed). +# +load_igb_uio_module() +{ + if [ ! -f $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko ];then + echo "## ERROR: Target does not have the DPDK UIO Kernel Module." + echo " To fix, please try to rebuild target." + return + fi + + remove_igb_uio_module + + /sbin/lsmod | grep -s uio > /dev/null + if [ $? -ne 0 ] ; then + modinfo uio > /dev/null + if [ $? -eq 0 ]; then + echo "Loading uio module" + sudo /sbin/modprobe uio + fi + fi + + # UIO may be compiled into kernel, so it may not be an error if it can't + # be loaded. + + echo "Loading DPDK UIO module" + sudo /sbin/insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko + if [ $? -ne 0 ] ; then + echo "## ERROR: Could not load kmod/igb_uio.ko." + quit + fi +} + +# +# Unloads VFIO modules. +# +remove_vfio_module() +{ + echo "Unloading any existing VFIO module" + /sbin/lsmod | grep -s vfio > /dev/null + if [ $? -eq 0 ] ; then + sudo /sbin/rmmod vfio-pci + sudo /sbin/rmmod vfio_iommu_type1 + sudo /sbin/rmmod vfio + fi +} + +# +# Loads new vfio-pci (and vfio module if needed). +# +load_vfio_module() +{ + remove_vfio_module + + VFIO_PATH="kernel/drivers/vfio/pci/vfio-pci.ko" + + echo "Loading VFIO module" + /sbin/lsmod | grep -s vfio_pci > /dev/null + if [ $? -ne 0 ] ; then + if [ -f /lib/modules/$(uname -r)/$VFIO_PATH ] ; then + sudo /sbin/modprobe vfio-pci + fi + fi + + # make sure regular users can read /dev/vfio + echo "chmod /dev/vfio" + sudo chmod a+x /dev/vfio + if [ $? -ne 0 ] ; then + echo "FAIL" + quit + fi + echo "OK" + + # check if /dev/vfio/vfio exists - that way we + # know we either loaded the module, or it was + # compiled into the kernel + if [ ! -e /dev/vfio/vfio ] ; then + echo "## ERROR: VFIO not found!" + fi +} + +# +# Unloads the rte_kni.ko module. +# +remove_kni_module() +{ + echo "Unloading any existing DPDK KNI module" + /sbin/lsmod | grep -s rte_kni > /dev/null + if [ $? -eq 0 ] ; then + sudo /sbin/rmmod rte_kni + fi +} + +# +# Loads the rte_kni.ko module. +# +load_kni_module() +{ + # Check that the KNI module is already built. + if [ ! -f $RTE_SDK/$RTE_TARGET/kmod/rte_kni.ko ];then + echo "## ERROR: Target does not have the DPDK KNI Module." + echo " To fix, please try to rebuild target." + return + fi + + # Unload existing version if present. + remove_kni_module + + # Now try load the KNI module. + echo "Loading DPDK KNI module" + sudo /sbin/insmod $RTE_SDK/$RTE_TARGET/kmod/rte_kni.ko + if [ $? -ne 0 ] ; then + echo "## ERROR: Could not load kmod/rte_kni.ko." + quit + fi +} + +# +# Sets appropriate permissions on /dev/vfio/* files +# +set_vfio_permissions() +{ + # make sure regular users can read /dev/vfio + echo "chmod /dev/vfio" + sudo chmod a+x /dev/vfio + if [ $? -ne 0 ] ; then + echo "FAIL" + quit + fi + echo "OK" + + # make sure regular user can access everything inside /dev/vfio + echo "chmod /dev/vfio/*" + sudo chmod 0666 /dev/vfio/* + if [ $? -ne 0 ] ; then + echo "FAIL" + quit + fi + echo "OK" + + # since permissions are only to be set when running as + # regular user, we only check ulimit here + # + # warn if regular user is only allowed + # to memlock <64M of memory + MEMLOCK_AMNT=`ulimit -l` + + if [ "$MEMLOCK_AMNT" != "unlimited" ] ; then + MEMLOCK_MB=`expr $MEMLOCK_AMNT / 1024` + echo "" + echo "Current user memlock limit: ${MEMLOCK_MB} MB" + echo "" + echo "This is the maximum amount of memory you will be" + echo "able to use with DPDK and VFIO if run as current user." + echo -n "To change this, please adjust limits.conf memlock " + echo "limit for current user." + + if [ $MEMLOCK_AMNT -lt 65536 ] ; then + echo "" + echo "## WARNING: memlock limit is less than 64MB" + echo -n "## DPDK with VFIO may not be able to initialize " + echo "if run as current user." + fi + fi +} + +# +# Removes all reserved hugepages. +# +clear_huge_pages() +{ + echo > .echo_tmp + for d in /sys/devices/system/node/node? ; do + echo "echo 0 > $d/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" >> .echo_tmp + done + echo "Removing currently reserved hugepages" + sudo sh .echo_tmp + rm -f .echo_tmp + + remove_mnt_huge +} + +# +# Creates hugepages. +# +set_non_numa_pages() +{ + clear_huge_pages + + echo "" + echo " Input the number of ${HUGEPGSZ} hugepages" + echo " Example: to have 128MB of hugepages available in a 2MB huge page system," + echo " enter '64' to reserve 64 * 2MB pages" + echo -n "Number of pages: " + read Pages + + echo "echo $Pages > /sys/kernel/mm/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" > .echo_tmp + + echo "Reserving hugepages" + sudo sh .echo_tmp + rm -f .echo_tmp + + create_mnt_huge +} + +# +# Creates hugepages on specific NUMA nodes. +# +set_numa_pages() +{ + clear_huge_pages + + echo "" + echo " Input the number of ${HUGEPGSZ} hugepages for each node" + echo " Example: to have 128MB of hugepages available per node in a 2MB huge page system," + echo " enter '64' to reserve 64 * 2MB pages on each node" + + echo > .echo_tmp + for d in /sys/devices/system/node/node? ; do + node=$(basename $d) + echo -n "Number of pages for $node: " + read Pages + echo "echo $Pages > $d/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" >> .echo_tmp + done + echo "Reserving hugepages" + sudo sh .echo_tmp + rm -f .echo_tmp + + create_mnt_huge +} + +# +# Run unit test application. +# +run_test_app() +{ + echo "" + echo " Enter hex bitmask of cores to execute test app on" + echo " Example: to execute app on cores 0 to 7, enter 0xff" + echo -n "bitmask: " + read Bitmask + echo "Launching app" + sudo ${RTE_TARGET}/app/test -c $Bitmask $EAL_PARAMS +} + +# +# Run unit testpmd application. +# +run_testpmd_app() +{ + echo "" + echo " Enter hex bitmask of cores to execute testpmd app on" + echo " Example: to execute app on cores 0 to 7, enter 0xff" + echo -n "bitmask: " + read Bitmask + echo "Launching app" + sudo ${RTE_TARGET}/app/testpmd -c $Bitmask $EAL_PARAMS -- -i +} + +# +# Print hugepage information. +# +grep_meminfo() +{ + grep -i huge /proc/meminfo +} + +# +# Calls dpdk-devbind.py --status to show the devices and what they +# are all bound to, in terms of drivers. +# +show_devices() +{ + if [ -d /sys/module/vfio_pci -o -d /sys/module/igb_uio ]; then + ${RTE_SDK}/usertools/dpdk-devbind.py --status + else + echo "# Please load the 'igb_uio' or 'vfio-pci' kernel module before " + echo "# querying or adjusting device bindings" + fi +} + +# +# Uses dpdk-devbind.py to move devices to work with vfio-pci +# +bind_devices_to_vfio() +{ + if [ -d /sys/module/vfio_pci ]; then + ${RTE_SDK}/usertools/dpdk-devbind.py --status + echo "" + echo -n "Enter PCI address of device to bind to VFIO driver: " + read PCI_PATH + sudo ${RTE_SDK}/usertools/dpdk-devbind.py -b vfio-pci $PCI_PATH && + echo "OK" + else + echo "# Please load the 'vfio-pci' kernel module before querying or " + echo "# adjusting device bindings" + fi +} + +# +# Uses dpdk-devbind.py to move devices to work with igb_uio +# +bind_devices_to_igb_uio() +{ + if [ -d /sys/module/igb_uio ]; then + ${RTE_SDK}/usertools/dpdk-devbind.py --status + echo "" + echo -n "Enter PCI address of device to bind to IGB UIO driver: " + read PCI_PATH + sudo ${RTE_SDK}/usertools/dpdk-devbind.py -b igb_uio $PCI_PATH && echo "OK" + else + echo "# Please load the 'igb_uio' kernel module before querying or " + echo "# adjusting device bindings" + fi +} + +# +# Uses dpdk-devbind.py to move devices to work with kernel drivers again +# +unbind_devices() +{ + ${RTE_SDK}/usertools/dpdk-devbind.py --status + echo "" + echo -n "Enter PCI address of device to unbind: " + read PCI_PATH + echo "" + echo -n "Enter name of kernel driver to bind the device to: " + read DRV + sudo ${RTE_SDK}/usertools/dpdk-devbind.py -b $DRV $PCI_PATH && echo "OK" +} + +# +# Options for building a target. Note that this step MUST be first as it sets +# up TARGETS[] starting from 1, and this is accessed in setup_target using the +# user entered option. +# +step1_func() +{ + TITLE="Select the DPDK environment to build" + CONFIG_NUM=1 + for cfg in config/defconfig_* ; do + cfg=${cfg/config\/defconfig_/} + TEXT[$CONFIG_NUM]="$cfg" + TARGETS[$CONFIG_NUM]=$cfg + FUNC[$CONFIG_NUM]="setup_target" + let "CONFIG_NUM+=1" + done +} + +# +# Options for setting up environment. +# +step2_func() +{ + TITLE="Setup linuxapp environment" + + TEXT[1]="Insert IGB UIO module" + FUNC[1]="load_igb_uio_module" + + TEXT[2]="Insert VFIO module" + FUNC[2]="load_vfio_module" + + TEXT[3]="Insert KNI module" + FUNC[3]="load_kni_module" + + TEXT[4]="Setup hugepage mappings for non-NUMA systems" + FUNC[4]="set_non_numa_pages" + + TEXT[5]="Setup hugepage mappings for NUMA systems" + FUNC[5]="set_numa_pages" + + TEXT[6]="Display current Ethernet/Crypto device settings" + FUNC[6]="show_devices" + + TEXT[7]="Bind Ethernet/Crypto device to IGB UIO module" + FUNC[7]="bind_devices_to_igb_uio" + + TEXT[8]="Bind Ethernet/Crypto device to VFIO module" + FUNC[8]="bind_devices_to_vfio" + + TEXT[9]="Setup VFIO permissions" + FUNC[9]="set_vfio_permissions" +} + +# +# Options for running applications. +# +step3_func() +{ + TITLE="Run test application for linuxapp environment" + + TEXT[1]="Run test application (\$RTE_TARGET/app/test)" + FUNC[1]="run_test_app" + + TEXT[2]="Run testpmd application in interactive mode (\$RTE_TARGET/app/testpmd)" + FUNC[2]="run_testpmd_app" +} + +# +# Other options +# +step4_func() +{ + TITLE="Other tools" + + TEXT[1]="List hugepage info from /proc/meminfo" + FUNC[1]="grep_meminfo" + +} + +# +# Options for cleaning up the system +# +step5_func() +{ + TITLE="Uninstall and system cleanup" + + TEXT[1]="Unbind devices from IGB UIO or VFIO driver" + FUNC[1]="unbind_devices" + + TEXT[2]="Remove IGB UIO module" + FUNC[2]="remove_igb_uio_module" + + TEXT[3]="Remove VFIO module" + FUNC[3]="remove_vfio_module" + + TEXT[4]="Remove KNI module" + FUNC[4]="remove_kni_module" + + TEXT[5]="Remove hugepage mappings" + FUNC[5]="clear_huge_pages" +} + +STEPS[1]="step1_func" +STEPS[2]="step2_func" +STEPS[3]="step3_func" +STEPS[4]="step4_func" +STEPS[5]="step5_func" + +QUIT=0 + +while [ "$QUIT" == "0" ]; do + OPTION_NUM=1 + + for s in $(seq ${#STEPS[@]}) ; do + ${STEPS[s]} + + echo "----------------------------------------------------------" + echo " Step $s: ${TITLE}" + echo "----------------------------------------------------------" + + for i in $(seq ${#TEXT[@]}) ; do + echo "[$OPTION_NUM] ${TEXT[i]}" + OPTIONS[$OPTION_NUM]=${FUNC[i]} + let "OPTION_NUM+=1" + done + + # Clear TEXT and FUNC arrays before next step + unset TEXT + unset FUNC + + echo "" + done + + echo "[$OPTION_NUM] Exit Script" + OPTIONS[$OPTION_NUM]="quit" + echo "" + echo -n "Option: " + read our_entry + echo "" + ${OPTIONS[our_entry]} ${our_entry} + + if [ "$QUIT" == "0" ] ; then + echo + echo -n "Press enter to continue ..."; read + fi + +done |