From 483eb2f56657e8e7f419ab1a4fab8dce9ade8609 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 20:24:20 +0200 Subject: Adding upstream version 14.2.21. Signed-off-by: Daniel Baumann --- src/spdk/test/vhost/migration/migration-tc3a.sh | 227 ++++++++++++++++++++++++ 1 file changed, 227 insertions(+) create mode 100644 src/spdk/test/vhost/migration/migration-tc3a.sh (limited to 'src/spdk/test/vhost/migration/migration-tc3a.sh') diff --git a/src/spdk/test/vhost/migration/migration-tc3a.sh b/src/spdk/test/vhost/migration/migration-tc3a.sh new file mode 100644 index 00000000..0f20b994 --- /dev/null +++ b/src/spdk/test/vhost/migration/migration-tc3a.sh @@ -0,0 +1,227 @@ +source $SPDK_BUILD_DIR/test/nvmf/common.sh +source $MIGRATION_DIR/autotest.config + +incoming_vm=1 +target_vm=2 +incoming_vm_ctrlr=naa.VhostScsi0.$incoming_vm +target_vm_ctrlr=naa.VhostScsi0.$target_vm +share_dir=$TEST_DIR/share +spdk_repo_share_dir=$TEST_DIR/share_spdk +job_file=$MIGRATION_DIR/migration-tc3.job + +if [ -z "$MGMT_TARGET_IP" ]; then + error "No IP address of target is given" +fi + +if [ -z "$MGMT_INITIATOR_IP" ]; then + error "No IP address of initiator is given" +fi + +if [ -z "$RDMA_TARGET_IP" ]; then + error "No IP address of targets RDMA capable NIC is given" +fi + +if [ -z "$RDMA_INITIATOR_IP" ]; then + error "No IP address of initiators RDMA capable NIC is given" +fi + +function ssh_remote() +{ + local ssh_cmd="ssh -i $SPDK_VHOST_SSH_KEY_FILE \ + -o UserKnownHostsFile=/dev/null \ + -o StrictHostKeyChecking=no -o ControlMaster=auto \ + root@$1" + + shift + $ssh_cmd "$@" +} + +function wait_for_remote() +{ + local timeout=40 + set +x + while [[ ! -f $share_dir/DONE ]]; do + echo -n "." + if (( timeout-- == 0 )); then + error "timeout while waiting for FIO!" + fi + sleep 1 + done + set -x + rm -f $share_dir/DONE +} + +function check_rdma_connection() +{ + local nic_name=$(ip -4 -o addr show to $RDMA_TARGET_IP up | cut -d' ' -f2) + if [[ -z $nic_name ]]; then + error "There is no NIC with IP address $RDMA_TARGET_IP configured" + fi + + if ! ls /sys/class/infiniband/*/device/net/$nic_name &> /dev/null; then + error "$nic_name with IP $RDMA_TARGET_IP is not a RDMA capable NIC" + fi + +} + +function host1_cleanup_nvmf() +{ + notice "Shutting down nvmf_tgt on local server" + if [[ ! -z "$1" ]]; then + pkill --signal $1 -F $nvmf_dir/nvmf_tgt.pid + else + pkill -F $nvmf_dir/nvmf_tgt.pid + fi + rm -f $nvmf_dir/nvmf_tgt.pid +} + +function host1_cleanup_vhost() +{ + trap 'host1_cleanup_nvmf SIGKILL; error_exit "${FUNCNAME}" "${LINENO}"' INT ERR EXIT + notice "Shutting down VM $incoming_vm" + vm_kill $incoming_vm + + notice "Removing bdev & controller from vhost on local server" + $rpc_0 delete_nvme_controller Nvme0 + $rpc_0 remove_vhost_controller $incoming_vm_ctrlr + + notice "Shutting down vhost app" + spdk_vhost_kill 0 + + host1_cleanup_nvmf +} + +function host1_start_nvmf() +{ + nvmf_dir="$TEST_DIR/nvmf_tgt" + rpc_nvmf="$SPDK_BUILD_DIR/scripts/rpc.py -s $nvmf_dir/nvmf_rpc.sock" + + notice "Starting nvmf_tgt instance on local server" + mkdir -p $nvmf_dir + rm -rf $nvmf_dir/* + + trap 'host1_cleanup_nvmf SIGKILL; error_exit "${FUNCNAME}" "${LINENO}"' INT ERR EXIT + $SPDK_BUILD_DIR/app/nvmf_tgt/nvmf_tgt -s 512 -m 0xF -r $nvmf_dir/nvmf_rpc.sock --wait-for-rpc & + nvmf_tgt_pid=$! + echo $nvmf_tgt_pid > $nvmf_dir/nvmf_tgt.pid + waitforlisten "$nvmf_tgt_pid" "$nvmf_dir/nvmf_rpc.sock" + $rpc_nvmf start_subsystem_init + $rpc_nvmf nvmf_create_transport -t RDMA -u 8192 -p 4 + $SPDK_BUILD_DIR/scripts/gen_nvme.sh --json | $rpc_nvmf load_subsystem_config + + $rpc_nvmf nvmf_subsystem_create nqn.2018-02.io.spdk:cnode1 -a -s SPDK01 + $rpc_nvmf nvmf_subsystem_add_ns nqn.2018-02.io.spdk:cnode1 Nvme0n1 + $rpc_nvmf nvmf_subsystem_add_listener nqn.2018-02.io.spdk:cnode1 -t rdma -a $RDMA_TARGET_IP -s 4420 +} + +function host1_start_vhost() +{ + rpc_0="$SPDK_BUILD_DIR/scripts/rpc.py -s $(get_vhost_dir 0)/rpc.sock" + + notice "Starting vhost0 instance on local server" + trap 'host1_cleanup_vhost; error_exit "${FUNCNAME}" "${LINENO}"' INT ERR EXIT + spdk_vhost_run --vhost-num=0 --no-pci + $rpc_0 construct_nvme_bdev -b Nvme0 -t rdma -f ipv4 -a $RDMA_TARGET_IP -s 4420 -n "nqn.2018-02.io.spdk:cnode1" + $rpc_0 construct_vhost_scsi_controller $incoming_vm_ctrlr + $rpc_0 add_vhost_scsi_lun $incoming_vm_ctrlr 0 Nvme0n1 + + vm_setup --os="$share_dir/migration.qcow2" --force=$incoming_vm --disk-type=spdk_vhost_scsi --disks=VhostScsi0 \ + --migrate-to=$target_vm --memory=512 --queue_num=1 + + # TODO: Fix loop calculating cpu_num in common.sh + # We need -smp 1 and -queue_num 1 for this test to work, and this loop + # in some cases calculates wrong cpu_num. + sed -i "s#smp 2#smp 1#g" $VM_BASE_DIR/$incoming_vm/run.sh + vm_run $incoming_vm + vm_wait_for_boot 300 $incoming_vm +} + +function cleanup_share() +{ + set +e + notice "Cleaning up share directory on remote and local server" + ssh_remote $MGMT_INITIATOR_IP "umount $VM_BASE_DIR" + ssh_remote $MGMT_INITIATOR_IP "umount $share_dir; rm -f $share_dir/* rm -rf $spdk_repo_share_dir" + rm -f $share_dir/migration.qcow2 + rm -f $share_dir/spdk.tar.gz + set -e +} + +function host_1_create_share() +{ + notice "Creating share directory on local server to re-use on remote" + mkdir -p $share_dir + mkdir -p $VM_BASE_DIR # This dir would've been created later but we need it now + rm -rf $share_dir/spdk.tar.gz $share_dir/spdk || true + cp $os_image $share_dir/migration.qcow2 + tar --exclude="*.o"--exclude="*.d" --exclude="*.git" -C $SPDK_BUILD_DIR -zcf $share_dir/spdk.tar.gz . +} + +function host_2_create_share() +{ + # Copy & compile the sources for later use on remote server. + ssh_remote $MGMT_INITIATOR_IP "uname -a" + ssh_remote $MGMT_INITIATOR_IP "mkdir -p $share_dir" + ssh_remote $MGMT_INITIATOR_IP "mkdir -p $spdk_repo_share_dir" + ssh_remote $MGMT_INITIATOR_IP "mkdir -p $VM_BASE_DIR" + ssh_remote $MGMT_INITIATOR_IP "sshfs -o\ + ssh_command=\"ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o ControlMaster=auto\ + -i $SPDK_VHOST_SSH_KEY_FILE\" root@$MGMT_TARGET_IP:$VM_BASE_DIR $VM_BASE_DIR" + ssh_remote $MGMT_INITIATOR_IP "sshfs -o\ + ssh_command=\"ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o ControlMaster=auto\ + -i $SPDK_VHOST_SSH_KEY_FILE\" root@$MGMT_TARGET_IP:$share_dir $share_dir" + ssh_remote $MGMT_INITIATOR_IP "mkdir -p $spdk_repo_share_dir/spdk" + ssh_remote $MGMT_INITIATOR_IP "tar -zxf $share_dir/spdk.tar.gz -C $spdk_repo_share_dir/spdk --strip-components=1" + ssh_remote $MGMT_INITIATOR_IP "cd $spdk_repo_share_dir/spdk; make clean; ./configure --with-rdma --enable-debug; make -j40" +} + +function host_2_start_vhost() +{ + ssh_remote $MGMT_INITIATOR_IP "nohup $spdk_repo_share_dir/spdk/test/vhost/migration/migration.sh\ + --test-cases=3b --work-dir=$TEST_DIR --os=$share_dir/migration.qcow2\ + --rdma-tgt-ip=$RDMA_TARGET_IP &>$share_dir/output.log &" + notice "Waiting for remote to be done with vhost & VM setup..." + wait_for_remote +} + +function setup_share() +{ + trap 'cleanup_share; error_exit "${FUNCNAME}" "${LINENO}"' INT ERR EXIT + host_1_create_share + host_2_create_share +} + +function migration_tc3() +{ + check_rdma_connection + setup_share + host1_start_nvmf + host1_start_vhost + host_2_start_vhost + + # Do migration + notice "Starting fio on local VM" + vm_check_scsi_location $incoming_vm + + run_fio $fio_bin --job-file="$job_file" --local --vm="${incoming_vm}$(printf ':/dev/%s' $SCSI_DISK)" + sleep 5 + + if ! is_fio_running $incoming_vm; then + vh_ssh $incoming_vm "cat /root/$(basename ${job_file}).out" + error "Fio not running on local VM before starting migration!" + fi + + vm_migrate $incoming_vm $RDMA_INITIATOR_IP + sleep 1 + + # Verify migration on remote host and clean up vhost + ssh_remote $MGMT_INITIATOR_IP "pkill -CONT -F $TEST_DIR/tc3b.pid" + notice "Waiting for remote to finish FIO on VM and clean up..." + wait_for_remote + + # Clean up local stuff + host1_cleanup_vhost + cleanup_share +} + +migration_tc3 -- cgit v1.2.3