// -*- mode:C++; tab-width:8; c-basic-offset:2; indent-tabs-mode:t -*- // vim: ts=8 sw=2 smarttab /* * Ceph - scalable distributed file system * * Copyright (C) 2004-2012 Sage Weil * * This is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software * Foundation. See file COPYING. * */ #ifndef CEPH_LIBRADOS_H #define CEPH_LIBRADOS_H #ifdef __cplusplus extern "C" { #endif #include #if defined(__linux__) #include #elif defined(__FreeBSD__) #include #endif #include #include #include "rados_types.h" #include #ifndef CEPH_OSD_TMAP_SET /* These are also defined in rados.h and objclass.h. Keep them in sync! */ #define CEPH_OSD_TMAP_HDR 'h' #define CEPH_OSD_TMAP_SET 's' #define CEPH_OSD_TMAP_CREATE 'c' #define CEPH_OSD_TMAP_RM 'r' #endif #define LIBRADOS_VER_MAJOR 3 #define LIBRADOS_VER_MINOR 0 #define LIBRADOS_VER_EXTRA 0 #define LIBRADOS_VERSION(maj, min, extra) ((maj << 16) + (min << 8) + extra) #define LIBRADOS_VERSION_CODE LIBRADOS_VERSION(LIBRADOS_VER_MAJOR, LIBRADOS_VER_MINOR, LIBRADOS_VER_EXTRA) #define LIBRADOS_SUPPORTS_WATCH 1 #define LIBRADOS_SUPPORTS_SERVICES 1 #define LIBRADOS_SUPPORTS_GETADDRS 1 #define LIBRADOS_SUPPORTS_APP_METADATA 1 /* RADOS lock flags * They are also defined in cls_lock_types.h. Keep them in sync! */ #define LIBRADOS_LOCK_FLAG_RENEW 0x1 /* * Constants for rados_write_op_create(). */ #define LIBRADOS_CREATE_EXCLUSIVE 1 #define LIBRADOS_CREATE_IDEMPOTENT 0 /* * Flags that can be set on a per-op basis via * rados_read_op_set_flags() and rados_write_op_set_flags(). */ enum { // fail a create operation if the object already exists LIBRADOS_OP_FLAG_EXCL = 0x1, // allow the transaction to succeed even if the flagged op fails LIBRADOS_OP_FLAG_FAILOK = 0x2, // indicate read/write op random LIBRADOS_OP_FLAG_FADVISE_RANDOM = 0x4, // indicate read/write op sequential LIBRADOS_OP_FLAG_FADVISE_SEQUENTIAL = 0x8, // indicate read/write data will be accessed in the near future (by someone) LIBRADOS_OP_FLAG_FADVISE_WILLNEED = 0x10, // indicate read/write data will not accessed in the near future (by anyone) LIBRADOS_OP_FLAG_FADVISE_DONTNEED = 0x20, // indicate read/write data will not accessed again (by *this* client) LIBRADOS_OP_FLAG_FADVISE_NOCACHE = 0x40, // optionally support FUA (force unit access) on write requests LIBRADOS_OP_FLAG_FADVISE_FUA = 0x80, }; #define CEPH_RADOS_API /** * @name xattr comparison operations * Operators for comparing xattrs on objects, and aborting the * rados_read_op or rados_write_op transaction if the comparison * fails. * * @{ */ enum { LIBRADOS_CMPXATTR_OP_EQ = 1, LIBRADOS_CMPXATTR_OP_NE = 2, LIBRADOS_CMPXATTR_OP_GT = 3, LIBRADOS_CMPXATTR_OP_GTE = 4, LIBRADOS_CMPXATTR_OP_LT = 5, LIBRADOS_CMPXATTR_OP_LTE = 6 }; /** @} */ /** * @name Operation Flags * Flags for rados_read_op_operate(), rados_write_op_operate(), * rados_aio_read_op_operate(), and rados_aio_write_op_operate(). * See librados.hpp for details. * @{ */ enum { LIBRADOS_OPERATION_NOFLAG = 0, LIBRADOS_OPERATION_BALANCE_READS = 1, LIBRADOS_OPERATION_LOCALIZE_READS = 2, LIBRADOS_OPERATION_ORDER_READS_WRITES = 4, LIBRADOS_OPERATION_IGNORE_CACHE = 8, LIBRADOS_OPERATION_SKIPRWLOCKS = 16, LIBRADOS_OPERATION_IGNORE_OVERLAY = 32, /* send requests to cluster despite the cluster or pool being marked full; ops will either succeed (e.g., delete) or return EDQUOT or ENOSPC. */ LIBRADOS_OPERATION_FULL_TRY = 64, /* * Mainly for delete op */ LIBRADOS_OPERATION_FULL_FORCE = 128, LIBRADOS_OPERATION_IGNORE_REDIRECT = 256, LIBRADOS_OPERATION_ORDERSNAP = 512, }; /** @} */ /** * @name Alloc hint flags * Flags for rados_write_op_alloc_hint2() and rados_set_alloc_hint2() * indicating future IO patterns. * @{ */ enum { LIBRADOS_ALLOC_HINT_FLAG_SEQUENTIAL_WRITE = 1, LIBRADOS_ALLOC_HINT_FLAG_RANDOM_WRITE = 2, LIBRADOS_ALLOC_HINT_FLAG_SEQUENTIAL_READ = 4, LIBRADOS_ALLOC_HINT_FLAG_RANDOM_READ = 8, LIBRADOS_ALLOC_HINT_FLAG_APPEND_ONLY = 16, LIBRADOS_ALLOC_HINT_FLAG_IMMUTABLE = 32, LIBRADOS_ALLOC_HINT_FLAG_SHORTLIVED = 64, LIBRADOS_ALLOC_HINT_FLAG_LONGLIVED = 128, LIBRADOS_ALLOC_HINT_FLAG_COMPRESSIBLE = 256, LIBRADOS_ALLOC_HINT_FLAG_INCOMPRESSIBLE = 512, }; /** @} */ typedef enum { LIBRADOS_CHECKSUM_TYPE_XXHASH32 = 0, LIBRADOS_CHECKSUM_TYPE_XXHASH64 = 1, LIBRADOS_CHECKSUM_TYPE_CRC32C = 2 } rados_checksum_type_t; /* * snap id contants */ #define LIBRADOS_SNAP_HEAD ((uint64_t)(-2)) #define LIBRADOS_SNAP_DIR ((uint64_t)(-1)) /** * @typedef rados_t * * A handle for interacting with a RADOS cluster. It encapsulates all * RADOS client configuration, including username, key for * authentication, logging, and debugging. Talking different clusters * -- or to the same cluster with different users -- requires * different cluster handles. */ #ifndef VOIDPTR_RADOS_T #define VOIDPTR_RADOS_T typedef void *rados_t; #endif //VOIDPTR_RADOS_T /** * @typedef rados_config_t * * A handle for the ceph configuration context for the rados_t cluster * instance. This can be used to share configuration context/state * (e.g., logging configuration) between librados instance. * * @warning The config context does not have independent reference * counting. As such, a rados_config_t handle retrieved from a given * rados_t is only valid as long as that rados_t. */ typedef void *rados_config_t; /** * @typedef rados_ioctx_t * * An io context encapsulates a few settings for all I/O operations * done on it: * - pool - set when the io context is created (see rados_ioctx_create()) * - snapshot context for writes (see * rados_ioctx_selfmanaged_snap_set_write_ctx()) * - snapshot id to read from (see rados_ioctx_snap_set_read()) * - object locator for all single-object operations (see * rados_ioctx_locator_set_key()) * - namespace for all single-object operations (see * rados_ioctx_set_namespace()). Set to LIBRADOS_ALL_NSPACES * before rados_nobjects_list_open() will list all objects in all * namespaces. * * @warning Changing any of these settings is not thread-safe - * librados users must synchronize any of these changes on their own, * or use separate io contexts for each thread */ typedef void *rados_ioctx_t; /** * @typedef rados_list_ctx_t * * An iterator for listing the objects in a pool. * Used with rados_nobjects_list_open(), * rados_nobjects_list_next(), rados_nobjects_list_next2(), and * rados_nobjects_list_close(). */ typedef void *rados_list_ctx_t; /** * @typedef rados_object_list_cursor * * The cursor used with rados_enumerate_objects * and accompanying methods. */ typedef void * rados_object_list_cursor; /** * @struct rados_object_list_item * * The item populated by rados_object_list in * the results array. */ typedef struct rados_object_list_item { /// oid length size_t oid_length; /// name of the object char *oid; /// namespace length size_t nspace_length; /// the object namespace char *nspace; /// locator length size_t locator_length; /// object locator char *locator; } rados_object_list_item; /** * @typedef rados_snap_t * The id of a snapshot. */ typedef uint64_t rados_snap_t; /** * @typedef rados_xattrs_iter_t * An iterator for listing extended attrbutes on an object. * Used with rados_getxattrs(), rados_getxattrs_next(), and * rados_getxattrs_end(). */ typedef void *rados_xattrs_iter_t; /** * @typedef rados_omap_iter_t * An iterator for listing omap key/value pairs on an object. * Used with rados_read_op_omap_get_keys(), rados_read_op_omap_get_vals(), * rados_read_op_omap_get_vals_by_keys(), rados_omap_get_next(), and * rados_omap_get_end(). */ typedef void *rados_omap_iter_t; /** * @struct rados_pool_stat_t * Usage information for a pool. */ struct rados_pool_stat_t { /// space used in bytes uint64_t num_bytes; /// space used in KB uint64_t num_kb; /// number of objects in the pool uint64_t num_objects; /// number of clones of objects uint64_t num_object_clones; /// num_objects * num_replicas uint64_t num_object_copies; /// number of objects missing on primary uint64_t num_objects_missing_on_primary; /// number of objects found on no OSDs uint64_t num_objects_unfound; /// number of objects replicated fewer times than they should be /// (but found on at least one OSD) uint64_t num_objects_degraded; /// number of objects read uint64_t num_rd; /// objects read in KB uint64_t num_rd_kb; /// number of objects written uint64_t num_wr; /// objects written in KB uint64_t num_wr_kb; /// bytes originally provided by user uint64_t num_user_bytes; /// bytes passed compression uint64_t compressed_bytes_orig; /// bytes resulted after compression uint64_t compressed_bytes; /// bytes allocated at storage uint64_t compressed_bytes_alloc; }; /** * @struct rados_cluster_stat_t * Cluster-wide usage information */ struct rados_cluster_stat_t { /// total device size uint64_t kb; /// total used uint64_t kb_used; /// total available/free uint64_t kb_avail; /// number of objects uint64_t num_objects; }; /** * @typedef rados_write_op_t * * An object write operation stores a number of operations which can be * executed atomically. For usage, see: * - Creation and deletion: rados_create_write_op() rados_release_write_op() * - Extended attribute manipulation: rados_write_op_cmpxattr() * rados_write_op_cmpxattr(), rados_write_op_setxattr(), * rados_write_op_rmxattr() * - Object map key/value pairs: rados_write_op_omap_set(), * rados_write_op_omap_rm_keys(), rados_write_op_omap_clear(), * rados_write_op_omap_cmp() * - Object properties: rados_write_op_assert_exists(), * rados_write_op_assert_version() * - Creating objects: rados_write_op_create() * - IO on objects: rados_write_op_append(), rados_write_op_write(), rados_write_op_zero * rados_write_op_write_full(), rados_write_op_writesame(), rados_write_op_remove, * rados_write_op_truncate(), rados_write_op_zero(), rados_write_op_cmpext() * - Hints: rados_write_op_set_alloc_hint() * - Performing the operation: rados_write_op_operate(), rados_aio_write_op_operate() */ typedef void *rados_write_op_t; /** * @typedef rados_read_op_t * * An object read operation stores a number of operations which can be * executed atomically. For usage, see: * - Creation and deletion: rados_create_read_op() rados_release_read_op() * - Extended attribute manipulation: rados_read_op_cmpxattr(), * rados_read_op_getxattr(), rados_read_op_getxattrs() * - Object map key/value pairs: rados_read_op_omap_get_vals(), * rados_read_op_omap_get_keys(), rados_read_op_omap_get_vals_by_keys(), * rados_read_op_omap_cmp() * - Object properties: rados_read_op_stat(), rados_read_op_assert_exists(), * rados_read_op_assert_version() * - IO on objects: rados_read_op_read(), rados_read_op_checksum(), * rados_read_op_cmpext() * - Custom operations: rados_read_op_exec(), rados_read_op_exec_user_buf() * - Request properties: rados_read_op_set_flags() * - Performing the operation: rados_read_op_operate(), * rados_aio_read_op_operate() */ typedef void *rados_read_op_t; /** * @typedef rados_completion_t * Represents the state of an asynchronous operation - it contains the * return value once the operation completes, and can be used to block * until the operation is complete or safe. */ typedef void *rados_completion_t; /** * @struct blkin_trace_info * blkin trace information for Zipkin tracing */ struct blkin_trace_info; /** * Get the version of librados. * * The version number is major.minor.extra. Note that this is * unrelated to the Ceph version number. * * TODO: define version semantics, i.e.: * - incrementing major is for backwards-incompatible changes * - incrementing minor is for backwards-compatible changes * - incrementing extra is for bug fixes * * @param major where to store the major version number * @param minor where to store the minor version number * @param extra where to store the extra version number */ CEPH_RADOS_API void rados_version(int *major, int *minor, int *extra); /** * @name Setup and Teardown * These are the first and last functions to that should be called * when using librados. * * @{ */ /** * Create a handle for communicating with a RADOS cluster. * * Ceph environment variables are read when this is called, so if * $CEPH_ARGS specifies everything you need to connect, no further * configuration is necessary. * * @param cluster where to store the handle * @param id the user to connect as (i.e. admin, not client.admin) * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_create(rados_t *cluster, const char * const id); /** * Extended version of rados_create. * * Like rados_create, but * 1) don't assume 'client\.'+id; allow full specification of name * 2) allow specification of cluster name * 3) flags for future expansion */ CEPH_RADOS_API int rados_create2(rados_t *pcluster, const char *const clustername, const char * const name, uint64_t flags); /** * Initialize a cluster handle from an existing configuration. * * Share configuration state with another rados_t instance. * * @param cluster where to store the handle * @param cct the existing configuration to use * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_create_with_context(rados_t *cluster, rados_config_t cct); /** * Ping the monitor with ID mon_id, storing the resulting reply in * buf (if specified) with a maximum size of len. * * The result buffer is allocated on the heap; the caller is * expected to release that memory with rados_buffer_free(). The * buffer and length pointers can be NULL, in which case they are * not filled in. * * @param cluster cluster handle * @param[in] mon_id ID of the monitor to ping * @param[out] outstr double pointer with the resulting reply * @param[out] outstrlen pointer with the size of the reply in outstr */ CEPH_RADOS_API int rados_ping_monitor(rados_t cluster, const char *mon_id, char **outstr, size_t *outstrlen); /** * Connect to the cluster. * * @note BUG: Before calling this, calling a function that communicates with the * cluster will crash. * * @pre The cluster handle is configured with at least a monitor * address. If cephx is enabled, a client name and secret must also be * set. * * @post If this succeeds, any function in librados may be used * * @param cluster The cluster to connect to. * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_connect(rados_t cluster); /** * Disconnects from the cluster. * * For clean up, this is only necessary after rados_connect() has * succeeded. * * @warning This does not guarantee any asynchronous writes have * completed. To do that, you must call rados_aio_flush() on all open * io contexts. * * @warning We implicitly call rados_watch_flush() on shutdown. If * there are watches being used, this should be done explicitly before * destroying the relevant IoCtx. We do it here as a safety measure. * * @post the cluster handle cannot be used again * * @param cluster the cluster to shutdown */ CEPH_RADOS_API void rados_shutdown(rados_t cluster); /** @} init */ /** * @name Configuration * These functions read and update Ceph configuration for a cluster * handle. Any configuration changes must be done before connecting to * the cluster. * * Options that librados users might want to set include: * - mon_host * - auth_supported * - key, keyfile, or keyring when using cephx * - log_file, log_to_stderr, err_to_stderr, and log_to_syslog * - debug_rados, debug_objecter, debug_monc, debug_auth, or debug_ms * * See docs.ceph.com for information about available configuration options` * * @{ */ /** * Configure the cluster handle using a Ceph config file * * If path is NULL, the default locations are searched, and the first * found is used. The locations are: * - $CEPH_CONF (environment variable) * - /etc/ceph/ceph.conf * - ~/.ceph/config * - ceph.conf (in the current working directory) * * @pre rados_connect() has not been called on the cluster handle * * @param cluster cluster handle to configure * @param path path to a Ceph configuration file * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_conf_read_file(rados_t cluster, const char *path); /** * Configure the cluster handle with command line arguments * * argv can contain any common Ceph command line option, including any * configuration parameter prefixed by '--' and replacing spaces with * dashes or underscores. For example, the following options are equivalent: * - --mon-host 10.0.0.1:6789 * - --mon_host 10.0.0.1:6789 * - -m 10.0.0.1:6789 * * @pre rados_connect() has not been called on the cluster handle * * @param cluster cluster handle to configure * @param argc number of arguments in argv * @param argv arguments to parse * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_conf_parse_argv(rados_t cluster, int argc, const char **argv); /** * Configure the cluster handle with command line arguments, returning * any remainders. Same rados_conf_parse_argv, except for extra * remargv argument to hold returns unrecognized arguments. * * @pre rados_connect() has not been called on the cluster handle * * @param cluster cluster handle to configure * @param argc number of arguments in argv * @param argv arguments to parse * @param remargv char* array for returned unrecognized arguments * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_conf_parse_argv_remainder(rados_t cluster, int argc, const char **argv, const char **remargv); /** * Configure the cluster handle based on an environment variable * * The contents of the environment variable are parsed as if they were * Ceph command line options. If var is NULL, the CEPH_ARGS * environment variable is used. * * @pre rados_connect() has not been called on the cluster handle * * @note BUG: this is not threadsafe - it uses a static buffer * * @param cluster cluster handle to configure * @param var name of the environment variable to read * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_conf_parse_env(rados_t cluster, const char *var); /** * Set a configuration option * * @pre rados_connect() has not been called on the cluster handle * * @param cluster cluster handle to configure * @param option option to set * @param value value of the option * @returns 0 on success, negative error code on failure * @returns -ENOENT when the option is not a Ceph configuration option */ CEPH_RADOS_API int rados_conf_set(rados_t cluster, const char *option, const char *value); /** * Get the value of a configuration option * * @param cluster configuration to read * @param option which option to read * @param buf where to write the configuration value * @param len the size of buf in bytes * @returns 0 on success, negative error code on failure * @returns -ENAMETOOLONG if the buffer is too short to contain the * requested value */ CEPH_RADOS_API int rados_conf_get(rados_t cluster, const char *option, char *buf, size_t len); /** @} config */ /** * Read usage info about the cluster * * This tells you total space, space used, space available, and number * of objects. These are not updated immediately when data is written, * they are eventually consistent. * * @param cluster cluster to query * @param result where to store the results * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_cluster_stat(rados_t cluster, struct rados_cluster_stat_t *result); /** * Get the fsid of the cluster as a hexadecimal string. * * The fsid is a unique id of an entire Ceph cluster. * * @param cluster where to get the fsid * @param buf where to write the fsid * @param len the size of buf in bytes (should be 37) * @returns 0 on success, negative error code on failure * @returns -ERANGE if the buffer is too short to contain the * fsid */ CEPH_RADOS_API int rados_cluster_fsid(rados_t cluster, char *buf, size_t len); /** * Get/wait for the most recent osdmap * * @param cluster the cluster to shutdown * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_wait_for_latest_osdmap(rados_t cluster); /** * @name Pools * * RADOS pools are separate namespaces for objects. Pools may have * different crush rules associated with them, so they could have * differing replication levels or placement strategies. RADOS * permissions are also tied to pools - users can have different read, * write, and execute permissions on a per-pool basis. * * @{ */ /** * List pools * * Gets a list of pool names as NULL-terminated strings. The pool * names will be placed in the supplied buffer one after another. * After the last pool name, there will be two 0 bytes in a row. * * If len is too short to fit all the pool name entries we need, we will fill * as much as we can. * * Buf may be null to determine the buffer size needed to list all pools. * * @param cluster cluster handle * @param buf output buffer * @param len output buffer length * @returns length of the buffer we would need to list all pools */ CEPH_RADOS_API int rados_pool_list(rados_t cluster, char *buf, size_t len); /** * List inconsistent placement groups of the given pool * * Gets a list of inconsistent placement groups as NULL-terminated strings. * The placement group names will be placed in the supplied buffer one after * another. After the last name, there will be two 0 types in a row. * * If len is too short to fit all the placement group entries we need, we will * fill as much as we can. * * @param cluster cluster handle * @param pool pool ID * @param buf output buffer * @param len output buffer length * @returns length of the buffer we would need to list all pools */ CEPH_RADOS_API int rados_inconsistent_pg_list(rados_t cluster, int64_t pool, char *buf, size_t len); /** * Get a configuration handle for a rados cluster handle * * This handle is valid only as long as the cluster handle is valid. * * @param cluster cluster handle * @returns config handle for this cluster */ CEPH_RADOS_API rados_config_t rados_cct(rados_t cluster); /** * Get a global id for current instance * * This id is a unique representation of current connection to the cluster * * @param cluster cluster handle * @returns instance global id */ CEPH_RADOS_API uint64_t rados_get_instance_id(rados_t cluster); /** * Gets the minimum compatible OSD version * * @param cluster cluster handle * @param[out] require_osd_release minimum compatible OSD version * based upon the current features * @returns 0 on sucess, negative error code on failure */ CEPH_RADOS_API int rados_get_min_compatible_osd(rados_t cluster, int8_t* require_osd_release); /** * Gets the minimum compatible client version * * @param cluster cluster handle * @param[out] min_compat_client minimum compatible client version * based upon the current features * @param[out] require_min_compat_client required minimum client version * based upon explicit setting * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_get_min_compatible_client(rados_t cluster, int8_t* min_compat_client, int8_t* require_min_compat_client); /** * Create an io context * * The io context allows you to perform operations within a particular * pool. For more details see rados_ioctx_t. * * @param cluster which cluster the pool is in * @param pool_name name of the pool * @param ioctx where to store the io context * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_create(rados_t cluster, const char *pool_name, rados_ioctx_t *ioctx); CEPH_RADOS_API int rados_ioctx_create2(rados_t cluster, int64_t pool_id, rados_ioctx_t *ioctx); /** * The opposite of rados_ioctx_create * * This just tells librados that you no longer need to use the io context. * It may not be freed immediately if there are pending asynchronous * requests on it, but you should not use an io context again after * calling this function on it. * * @warning This does not guarantee any asynchronous * writes have completed. You must call rados_aio_flush() * on the io context before destroying it to do that. * * @warning If this ioctx is used by rados_watch, the caller needs to * be sure that all registered watches are disconnected via * rados_unwatch() and that rados_watch_flush() is called. This * ensures that a racing watch callback does not make use of a * destroyed ioctx. * * @param io the io context to dispose of */ CEPH_RADOS_API void rados_ioctx_destroy(rados_ioctx_t io); /** * Get configuration handle for a pool handle * * @param io pool handle * @returns rados_config_t for this cluster */ CEPH_RADOS_API rados_config_t rados_ioctx_cct(rados_ioctx_t io); /** * Get the cluster handle used by this rados_ioctx_t * Note that this is a weak reference, and should not * be destroyed via rados_shutdown(). * * @param io the io context * @returns the cluster handle for this io context */ CEPH_RADOS_API rados_t rados_ioctx_get_cluster(rados_ioctx_t io); /** * Get pool usage statistics * * Fills in a rados_pool_stat_t after querying the cluster. * * @param io determines which pool to query * @param stats where to store the results * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_pool_stat(rados_ioctx_t io, struct rados_pool_stat_t *stats); /** * Get the id of a pool * * @param cluster which cluster the pool is in * @param pool_name which pool to look up * @returns id of the pool * @returns -ENOENT if the pool is not found */ CEPH_RADOS_API int64_t rados_pool_lookup(rados_t cluster, const char *pool_name); /** * Get the name of a pool * * @param cluster which cluster the pool is in * @param id the id of the pool * @param buf where to store the pool name * @param maxlen size of buffer where name will be stored * @returns length of string stored, or -ERANGE if buffer too small */ CEPH_RADOS_API int rados_pool_reverse_lookup(rados_t cluster, int64_t id, char *buf, size_t maxlen); /** * Create a pool with default settings * * The default crush rule is rule 0. * * @param cluster the cluster in which the pool will be created * @param pool_name the name of the new pool * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_pool_create(rados_t cluster, const char *pool_name); /** * Create a pool owned by a specific auid. * * DEPRECATED: auid support has been removed, and this call will be removed in a future * release. * * @param cluster the cluster in which the pool will be created * @param pool_name the name of the new pool * @param auid the id of the owner of the new pool * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_pool_create_with_auid(rados_t cluster, const char *pool_name, uint64_t auid) __attribute__((deprecated)); /** * Create a pool with a specific CRUSH rule * * @param cluster the cluster in which the pool will be created * @param pool_name the name of the new pool * @param crush_rule_num which rule to use for placement in the new pool1 * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_pool_create_with_crush_rule(rados_t cluster, const char *pool_name, uint8_t crush_rule_num); /** * Create a pool with a specific CRUSH rule and auid * * DEPRECATED: auid support has been removed and this call will be removed * in a future release. * * This is a combination of rados_pool_create_with_crush_rule() and * rados_pool_create_with_auid(). * * @param cluster the cluster in which the pool will be created * @param pool_name the name of the new pool * @param crush_rule_num which rule to use for placement in the new pool2 * @param auid the id of the owner of the new pool * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_pool_create_with_all(rados_t cluster, const char *pool_name, uint64_t auid, uint8_t crush_rule_num) __attribute__((deprecated)); /** * Returns the pool that is the base tier for this pool. * * The return value is the ID of the pool that should be used to read from/write to. * If tiering is not set up for the pool, returns \c pool. * * @param cluster the cluster the pool is in * @param pool ID of the pool to query * @param[out] base_tier base tier, or \c pool if tiering is not configured * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_pool_get_base_tier(rados_t cluster, int64_t pool, int64_t* base_tier); /** * Delete a pool and all data inside it * * The pool is removed from the cluster immediately, * but the actual data is deleted in the background. * * @param cluster the cluster the pool is in * @param pool_name which pool to delete * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_pool_delete(rados_t cluster, const char *pool_name); /** * Attempt to change an io context's associated auid "owner" * * DEPRECATED: auid support has been removed and this call has no effect. * * Requires that you have write permission on both the current and new * auid. * * @param io reference to the pool to change. * @param auid the auid you wish the io to have. * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_pool_set_auid(rados_ioctx_t io, uint64_t auid) __attribute__((deprecated)); /** * Get the auid of a pool * * DEPRECATED: auid support has been removed and this call always reports * CEPH_AUTH_UID_DEFAULT (-1). * @param io pool to query * @param auid where to store the auid * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_pool_get_auid(rados_ioctx_t io, uint64_t *auid) __attribute__((deprecated)); /* deprecated, use rados_ioctx_pool_requires_alignment2 instead */ CEPH_RADOS_API int rados_ioctx_pool_requires_alignment(rados_ioctx_t io) __attribute__((deprecated)); /** * Test whether the specified pool requires alignment or not. * * @param io pool to query * @param req 1 if alignment is supported, 0 if not. * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_pool_requires_alignment2(rados_ioctx_t io, int *req); /* deprecated, use rados_ioctx_pool_required_alignment2 instead */ CEPH_RADOS_API uint64_t rados_ioctx_pool_required_alignment(rados_ioctx_t io) __attribute__((deprecated)); /** * Get the alignment flavor of a pool * * @param io pool to query * @param alignment where to store the alignment flavor * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_pool_required_alignment2(rados_ioctx_t io, uint64_t *alignment); /** * Get the pool id of the io context * * @param io the io context to query * @returns the id of the pool the io context uses */ CEPH_RADOS_API int64_t rados_ioctx_get_id(rados_ioctx_t io); /** * Get the pool name of the io context * * @param io the io context to query * @param buf pointer to buffer where name will be stored * @param maxlen size of buffer where name will be stored * @returns length of string stored, or -ERANGE if buffer too small */ CEPH_RADOS_API int rados_ioctx_get_pool_name(rados_ioctx_t io, char *buf, unsigned maxlen); /** @} pools */ /** * @name Object Locators * * @{ */ /** * Set the key for mapping objects to pgs within an io context. * * The key is used instead of the object name to determine which * placement groups an object is put in. This affects all subsequent * operations of the io context - until a different locator key is * set, all objects in this io context will be placed in the same pg. * * @param io the io context to change * @param key the key to use as the object locator, or NULL to discard * any previously set key */ CEPH_RADOS_API void rados_ioctx_locator_set_key(rados_ioctx_t io, const char *key); /** * Set the namespace for objects within an io context * * The namespace specification further refines a pool into different * domains. The mapping of objects to pgs is also based on this * value. * * @param io the io context to change * @param nspace the name to use as the namespace, or NULL use the * default namespace */ CEPH_RADOS_API void rados_ioctx_set_namespace(rados_ioctx_t io, const char *nspace); /** * Get the namespace for objects within the io context * * @param io the io context to query * @param buf pointer to buffer where name will be stored * @param maxlen size of buffer where name will be stored * @returns length of string stored, or -ERANGE if buffer too small */ CEPH_RADOS_API int rados_ioctx_get_namespace(rados_ioctx_t io, char *buf, unsigned maxlen); /** @} obj_loc */ /** * @name Listing Objects * @{ */ /** * Start listing objects in a pool * * @param io the pool to list from * @param ctx the handle to store list context in * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_nobjects_list_open(rados_ioctx_t io, rados_list_ctx_t *ctx); /** * Return hash position of iterator, rounded to the current PG * * @param ctx iterator marking where you are in the listing * @returns current hash position, rounded to the current pg */ CEPH_RADOS_API uint32_t rados_nobjects_list_get_pg_hash_position(rados_list_ctx_t ctx); /** * Reposition object iterator to a different hash position * * @param ctx iterator marking where you are in the listing * @param pos hash position to move to * @returns actual (rounded) position we moved to */ CEPH_RADOS_API uint32_t rados_nobjects_list_seek(rados_list_ctx_t ctx, uint32_t pos); /** * Reposition object iterator to a different position * * @param ctx iterator marking where you are in the listing * @param cursor position to move to * @returns rounded position we moved to */ CEPH_RADOS_API uint32_t rados_nobjects_list_seek_cursor(rados_list_ctx_t ctx, rados_object_list_cursor cursor); /** * Reposition object iterator to a different position * * The returned handle must be released with rados_object_list_cursor_free(). * * @param ctx iterator marking where you are in the listing * @param cursor where to store cursor * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_nobjects_list_get_cursor(rados_list_ctx_t ctx, rados_object_list_cursor *cursor); /** * Get the next object name and locator in the pool * * *entry and *key are valid until next call to rados_nobjects_list_* * * @param ctx iterator marking where you are in the listing * @param entry where to store the name of the entry * @param key where to store the object locator (set to NULL to ignore) * @param nspace where to store the object namespace (set to NULL to ignore) * @returns 0 on success, negative error code on failure * @returns -ENOENT when there are no more objects to list */ CEPH_RADOS_API int rados_nobjects_list_next(rados_list_ctx_t ctx, const char **entry, const char **key, const char **nspace); /** * Get the next object name, locator and their sizes in the pool * * The sizes allow to list objects with \0 (the NUL character) * in .e.g *entry. Is is unusual see such object names but a bug * in a client has risen the need to handle them as well. * *entry and *key are valid until next call to rados_nobjects_list_* * * @param ctx iterator marking where you are in the listing * @param entry where to store the name of the entry * @param key where to store the object locator (set to NULL to ignore) * @param nspace where to store the object namespace (set to NULL to ignore) * @param entry_size where to store the size of name of the entry * @param key_size where to store the size of object locator (set to NULL to ignore) * @param nspace_size where to store the size of object namespace (set to NULL to ignore) * @returns 0 on success, negative error code on failure * @returns -ENOENT when there are no more objects to list */ CEPH_RADOS_API int rados_nobjects_list_next2(rados_list_ctx_t ctx, const char **entry, const char **key, const char **nspace, size_t *entry_size, size_t *key_size, size_t *nspace_size); /** * Close the object listing handle. * * This should be called when the handle is no longer needed. * The handle should not be used after it has been closed. * * @param ctx the handle to close */ CEPH_RADOS_API void rados_nobjects_list_close(rados_list_ctx_t ctx); /** * Get cursor handle pointing to the *beginning* of a pool. * * This is an opaque handle pointing to the start of a pool. It must * be released with rados_object_list_cursor_free(). * * @param io ioctx for the pool * @returns handle for the pool, NULL on error (pool does not exist) */ CEPH_RADOS_API rados_object_list_cursor rados_object_list_begin( rados_ioctx_t io); /** * Get cursor handle pointing to the *end* of a pool. * * This is an opaque handle pointing to the start of a pool. It must * be released with rados_object_list_cursor_free(). * * @param io ioctx for the pool * @returns handle for the pool, NULL on error (pool does not exist) */ CEPH_RADOS_API rados_object_list_cursor rados_object_list_end(rados_ioctx_t io); /** * Check if a cursor has reached the end of a pool * * @param io ioctx * @param cur cursor * @returns 1 if the cursor has reached the end of the pool, 0 otherwise */ CEPH_RADOS_API int rados_object_list_is_end(rados_ioctx_t io, rados_object_list_cursor cur); /** * Release a cursor * * Release a cursor. The handle may not be used after this point. * * @param io ioctx * @param cur cursor */ CEPH_RADOS_API void rados_object_list_cursor_free(rados_ioctx_t io, rados_object_list_cursor cur); /** * Compare two cursor positions * * Compare two cursors, and indicate whether the first cursor precedes, * matches, or follows the second. * * @param io ioctx * @param lhs first cursor * @param rhs second cursor * @returns -1, 0, or 1 for lhs < rhs, lhs == rhs, or lhs > rhs */ CEPH_RADOS_API int rados_object_list_cursor_cmp(rados_ioctx_t io, rados_object_list_cursor lhs, rados_object_list_cursor rhs); /** * @return the number of items set in the results array */ CEPH_RADOS_API int rados_object_list(rados_ioctx_t io, const rados_object_list_cursor start, const rados_object_list_cursor finish, const size_t result_size, const char *filter_buf, const size_t filter_buf_len, rados_object_list_item *results, rados_object_list_cursor *next); CEPH_RADOS_API void rados_object_list_free( const size_t result_size, rados_object_list_item *results); /** * Obtain cursors delineating a subset of a range. Use this * when you want to split up the work of iterating over the * global namespace. Expected use case is when you are iterating * in parallel, with `m` workers, and each worker taking an id `n`. * * @param io ioctx * @param start start of the range to be sliced up (inclusive) * @param finish end of the range to be sliced up (exclusive) * @param n which of the m chunks you would like to get cursors for * @param m how many chunks to divide start-finish into * @param split_start cursor populated with start of the subrange (inclusive) * @param split_finish cursor populated with end of the subrange (exclusive) */ CEPH_RADOS_API void rados_object_list_slice(rados_ioctx_t io, const rados_object_list_cursor start, const rados_object_list_cursor finish, const size_t n, const size_t m, rados_object_list_cursor *split_start, rados_object_list_cursor *split_finish); /** @} Listing Objects */ /** * @name Snapshots * * RADOS snapshots are based upon sequence numbers that form a * snapshot context. They are pool-specific. The snapshot context * consists of the current snapshot sequence number for a pool, and an * array of sequence numbers at which snapshots were taken, in * descending order. Whenever a snapshot is created or deleted, the * snapshot sequence number for the pool is increased. To add a new * snapshot, the new snapshot sequence number must be increased and * added to the snapshot context. * * There are two ways to manage these snapshot contexts: * -# within the RADOS cluster * These are called pool snapshots, and store the snapshot context * in the OSDMap. These represent a snapshot of all the objects in * a pool. * -# within the RADOS clients * These are called self-managed snapshots, and push the * responsibility for keeping track of the snapshot context to the * clients. For every write, the client must send the snapshot * context. In librados, this is accomplished with * rados_selfmanaged_snap_set_write_ctx(). These are more * difficult to manage, but are restricted to specific objects * instead of applying to an entire pool. * * @{ */ /** * Create a pool-wide snapshot * * @param io the pool to snapshot * @param snapname the name of the snapshot * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_snap_create(rados_ioctx_t io, const char *snapname); /** * Delete a pool snapshot * * @param io the pool to delete the snapshot from * @param snapname which snapshot to delete * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_snap_remove(rados_ioctx_t io, const char *snapname); /** * Rollback an object to a pool snapshot * * The contents of the object will be the same as * when the snapshot was taken. * * @param io the pool in which the object is stored * @param oid the name of the object to rollback * @param snapname which snapshot to rollback to * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_snap_rollback(rados_ioctx_t io, const char *oid, const char *snapname); /** * @warning Deprecated: Use rados_ioctx_snap_rollback() instead */ CEPH_RADOS_API int rados_rollback(rados_ioctx_t io, const char *oid, const char *snapname) __attribute__((deprecated)); /** * Set the snapshot from which reads are performed. * * Subsequent reads will return data as it was at the time of that * snapshot. * * @param io the io context to change * @param snap the id of the snapshot to set, or LIBRADOS_SNAP_HEAD for no * snapshot (i.e. normal operation) */ CEPH_RADOS_API void rados_ioctx_snap_set_read(rados_ioctx_t io, rados_snap_t snap); /** * Allocate an ID for a self-managed snapshot * * Get a unique ID to put in the snaphot context to create a * snapshot. A clone of an object is not created until a write with * the new snapshot context is completed. * * @param io the pool in which the snapshot will exist * @param snapid where to store the newly allocated snapshot ID * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_selfmanaged_snap_create(rados_ioctx_t io, rados_snap_t *snapid); CEPH_RADOS_API void rados_aio_ioctx_selfmanaged_snap_create(rados_ioctx_t io, rados_snap_t *snapid, rados_completion_t completion); /** * Remove a self-managed snapshot * * This increases the snapshot sequence number, which will cause * snapshots to be removed lazily. * * @param io the pool in which the snapshot will exist * @param snapid where to store the newly allocated snapshot ID * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_selfmanaged_snap_remove(rados_ioctx_t io, rados_snap_t snapid); CEPH_RADOS_API void rados_aio_ioctx_selfmanaged_snap_remove(rados_ioctx_t io, rados_snap_t snapid, rados_completion_t completion); /** * Rollback an object to a self-managed snapshot * * The contents of the object will be the same as * when the snapshot was taken. * * @param io the pool in which the object is stored * @param oid the name of the object to rollback * @param snapid which snapshot to rollback to * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_selfmanaged_snap_rollback(rados_ioctx_t io, const char *oid, rados_snap_t snapid); /** * Set the snapshot context for use when writing to objects * * This is stored in the io context, and applies to all future writes. * * @param io the io context to change * @param seq the newest snapshot sequence number for the pool * @param snaps array of snapshots in sorted by descending id * @param num_snaps how many snaphosts are in the snaps array * @returns 0 on success, negative error code on failure * @returns -EINVAL if snaps are not in descending order */ CEPH_RADOS_API int rados_ioctx_selfmanaged_snap_set_write_ctx(rados_ioctx_t io, rados_snap_t seq, rados_snap_t *snaps, int num_snaps); /** * List all the ids of pool snapshots * * If the output array does not have enough space to fit all the * snapshots, -ERANGE is returned and the caller should retry with a * larger array. * * @param io the pool to read from * @param snaps where to store the results * @param maxlen the number of rados_snap_t that fit in the snaps array * @returns number of snapshots on success, negative error code on failure * @returns -ERANGE is returned if the snaps array is too short */ CEPH_RADOS_API int rados_ioctx_snap_list(rados_ioctx_t io, rados_snap_t *snaps, int maxlen); /** * Get the id of a pool snapshot * * @param io the pool to read from * @param name the snapshot to find * @param id where to store the result * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_snap_lookup(rados_ioctx_t io, const char *name, rados_snap_t *id); /** * Get the name of a pool snapshot * * @param io the pool to read from * @param id the snapshot to find * @param name where to store the result * @param maxlen the size of the name array * @returns 0 on success, negative error code on failure * @returns -ERANGE if the name array is too small */ CEPH_RADOS_API int rados_ioctx_snap_get_name(rados_ioctx_t io, rados_snap_t id, char *name, int maxlen); /** * Find when a pool snapshot occurred * * @param io the pool the snapshot was taken in * @param id the snapshot to lookup * @param t where to store the result * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_ioctx_snap_get_stamp(rados_ioctx_t io, rados_snap_t id, time_t *t); /** @} Snapshots */ /** * @name Synchronous I/O * Writes are replicated to a number of OSDs based on the * configuration of the pool they are in. These write functions block * until data is in memory on all replicas of the object they're * writing to - they are equivalent to doing the corresponding * asynchronous write, and the calling * rados_ioctx_wait_for_complete(). For greater data safety, use the * asynchronous functions and rados_aio_wait_for_safe(). * * @{ */ /** * Return the version of the last object read or written to. * * This exposes the internal version number of the last object read or * written via this io context * * @param io the io context to check * @returns last read or written object version */ CEPH_RADOS_API uint64_t rados_get_last_version(rados_ioctx_t io); /** * Write *len* bytes from *buf* into the *oid* object, starting at * offset *off*. The value of *len* must be <= UINT_MAX/2. * * @note This will never return a positive value not equal to len. * @param io the io context in which the write will occur * @param oid name of the object * @param buf data to write * @param len length of the data, in bytes * @param off byte offset in the object to begin writing at * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_write(rados_ioctx_t io, const char *oid, const char *buf, size_t len, uint64_t off); /** * Write *len* bytes from *buf* into the *oid* object. The value of * *len* must be <= UINT_MAX/2. * * The object is filled with the provided data. If the object exists, * it is atomically truncated and then written. * * @param io the io context in which the write will occur * @param oid name of the object * @param buf data to write * @param len length of the data, in bytes * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_write_full(rados_ioctx_t io, const char *oid, const char *buf, size_t len); /** * Write the same *data_len* bytes from *buf* multiple times into the * *oid* object. *write_len* bytes are written in total, which must be * a multiple of *data_len*. The value of *write_len* and *data_len* * must be <= UINT_MAX/2. * * @param io the io context in which the write will occur * @param oid name of the object * @param buf data to write * @param data_len length of the data, in bytes * @param write_len the total number of bytes to write * @param off byte offset in the object to begin writing at * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_writesame(rados_ioctx_t io, const char *oid, const char *buf, size_t data_len, size_t write_len, uint64_t off); /** * Append *len* bytes from *buf* into the *oid* object. The value of * *len* must be <= UINT_MAX/2. * * @param io the context to operate in * @param oid the name of the object * @param buf the data to append * @param len length of buf (in bytes) * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_append(rados_ioctx_t io, const char *oid, const char *buf, size_t len); /** * Read data from an object * * The io context determines the snapshot to read from, if any was set * by rados_ioctx_snap_set_read(). * * @param io the context in which to perform the read * @param oid the name of the object to read from * @param buf where to store the results * @param len the number of bytes to read * @param off the offset to start reading from in the object * @returns number of bytes read on success, negative error code on * failure */ CEPH_RADOS_API int rados_read(rados_ioctx_t io, const char *oid, char *buf, size_t len, uint64_t off); /** * Compute checksum from object data * * The io context determines the snapshot to checksum, if any was set * by rados_ioctx_snap_set_read(). The length of the init_value and * resulting checksum are dependent upon the checksum type: * * XXHASH64: le64 * XXHASH32: le32 * CRC32C: le32 * * The checksum result is encoded the following manner: * * le32 num_checksum_chunks * { * leXX checksum for chunk (where XX = appropriate size for the checksum type) * } * num_checksum_chunks * * @param io the context in which to perform the checksum * @param oid the name of the object to checksum * @param type the checksum algorithm to utilize * @param init_value the init value for the algorithm * @param init_value_len the length of the init value * @param len the number of bytes to checksum * @param off the offset to start checksumming in the object * @param chunk_size optional length-aligned chunk size for checksums * @param pchecksum where to store the checksum result * @param checksum_len the number of bytes available for the result * @return negative error code on failure */ CEPH_RADOS_API int rados_checksum(rados_ioctx_t io, const char *oid, rados_checksum_type_t type, const char *init_value, size_t init_value_len, size_t len, uint64_t off, size_t chunk_size, char *pchecksum, size_t checksum_len); /** * Delete an object * * @note This does not delete any snapshots of the object. * * @param io the pool to delete the object from * @param oid the name of the object to delete * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_remove(rados_ioctx_t io, const char *oid); /** * Resize an object * * If this enlarges the object, the new area is logically filled with * zeroes. If this shrinks the object, the excess data is removed. * * @param io the context in which to truncate * @param oid the name of the object * @param size the new size of the object in bytes * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_trunc(rados_ioctx_t io, const char *oid, uint64_t size); /** * Compare an on-disk object range with a buffer * * @param io the context in which to perform the comparison * @param o name of the object * @param cmp_buf buffer containing bytes to be compared with object contents * @param cmp_len length to compare and size of @c cmp_buf in bytes * @param off object byte offset at which to start the comparison * @returns 0 on success, negative error code on failure, * (-MAX_ERRNO - mismatch_off) on mismatch */ CEPH_RADOS_API int rados_cmpext(rados_ioctx_t io, const char *o, const char *cmp_buf, size_t cmp_len, uint64_t off); /** * @name Xattrs * Extended attributes are stored as extended attributes on the files * representing an object on the OSDs. Thus, they have the same * limitations as the underlying filesystem. On ext4, this means that * the total data stored in xattrs cannot exceed 4KB. * * @{ */ /** * Get the value of an extended attribute on an object. * * @param io the context in which the attribute is read * @param o name of the object * @param name which extended attribute to read * @param buf where to store the result * @param len size of buf in bytes * @returns length of xattr value on success, negative error code on failure */ CEPH_RADOS_API int rados_getxattr(rados_ioctx_t io, const char *o, const char *name, char *buf, size_t len); /** * Set an extended attribute on an object. * * @param io the context in which xattr is set * @param o name of the object * @param name which extended attribute to set * @param buf what to store in the xattr * @param len the number of bytes in buf * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_setxattr(rados_ioctx_t io, const char *o, const char *name, const char *buf, size_t len); /** * Delete an extended attribute from an object. * * @param io the context in which to delete the xattr * @param o the name of the object * @param name which xattr to delete * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_rmxattr(rados_ioctx_t io, const char *o, const char *name); /** * Start iterating over xattrs on an object. * * @post iter is a valid iterator * * @param io the context in which to list xattrs * @param oid name of the object * @param iter where to store the iterator * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_getxattrs(rados_ioctx_t io, const char *oid, rados_xattrs_iter_t *iter); /** * Get the next xattr on the object * * @pre iter is a valid iterator * * @post name is the NULL-terminated name of the next xattr, and val * contains the value of the xattr, which is of length len. If the end * of the list has been reached, name and val are NULL, and len is 0. * * @param iter iterator to advance * @param name where to store the name of the next xattr * @param val where to store the value of the next xattr * @param len the number of bytes in val * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_getxattrs_next(rados_xattrs_iter_t iter, const char **name, const char **val, size_t *len); /** * Close the xattr iterator. * * iter should not be used after this is called. * * @param iter the iterator to close */ CEPH_RADOS_API void rados_getxattrs_end(rados_xattrs_iter_t iter); /** @} Xattrs */ /** * Get the next omap key/value pair on the object * * @pre iter is a valid iterator * * @post key and val are the next key/value pair. key is * null-terminated, and val has length len. If the end of the list has * been reached, key and val are NULL, and len is 0. key and val will * not be accessible after rados_omap_get_end() is called on iter, so * if they are needed after that they should be copied. * * @param iter iterator to advance * @param key where to store the key of the next omap entry * @param val where to store the value of the next omap entry * @param len where to store the number of bytes in val * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_omap_get_next(rados_omap_iter_t iter, char **key, char **val, size_t *len); /** * Get the next omap key/value pair on the object. Note that it's * perfectly safe to mix calls to rados_omap_get_next and * rados_omap_get_next2. * * @pre iter is a valid iterator * * @post key and val are the next key/value pair. key has length * keylen and val has length vallen. If the end of the list has * been reached, key and val are NULL, and keylen and vallen is 0. * key and val will not be accessible after rados_omap_get_end() * is called on iter, so if they are needed after that they * should be copied. * * @param iter iterator to advance * @param key where to store the key of the next omap entry * @param val where to store the value of the next omap entry * @param key_len where to store the number of bytes in key * @param val_len where to store the number of bytes in val * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_omap_get_next2(rados_omap_iter_t iter, char **key, char **val, size_t *key_len, size_t *val_len); /** * Return number of elements in the iterator * * @param iter the iterator of which to return the size */ CEPH_RADOS_API unsigned int rados_omap_iter_size(rados_omap_iter_t iter); /** * Close the omap iterator. * * iter should not be used after this is called. * * @param iter the iterator to close */ CEPH_RADOS_API void rados_omap_get_end(rados_omap_iter_t iter); /** * Get object stats (size/mtime) * * TODO: when are these set, and by whom? can they be out of date? * * @param io ioctx * @param o object name * @param psize where to store object size * @param pmtime where to store modification time * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_stat(rados_ioctx_t io, const char *o, uint64_t *psize, time_t *pmtime); /** * Execute an OSD class method on an object * * The OSD has a plugin mechanism for performing complicated * operations on an object atomically. These plugins are called * classes. This function allows librados users to call the custom * methods. The input and output formats are defined by the class. * Classes in ceph.git can be found in src/cls subdirectories * * @param io the context in which to call the method * @param oid the object to call the method on * @param cls the name of the class * @param method the name of the method * @param in_buf where to find input * @param in_len length of in_buf in bytes * @param buf where to store output * @param out_len length of buf in bytes * @returns the length of the output, or * -ERANGE if out_buf does not have enough space to store it (For methods that return data). For * methods that don't return data, the return value is * method-specific. */ CEPH_RADOS_API int rados_exec(rados_ioctx_t io, const char *oid, const char *cls, const char *method, const char *in_buf, size_t in_len, char *buf, size_t out_len); /** @} Synchronous I/O */ /** * @name Asynchronous I/O * Read and write to objects without blocking. * * @{ */ /** * @typedef rados_callback_t * Callbacks for asynchrous operations take two parameters: * - cb the completion that has finished * - arg application defined data made available to the callback function */ typedef void (*rados_callback_t)(rados_completion_t cb, void *arg); /** * Constructs a completion to use with asynchronous operations * * The complete and safe callbacks correspond to operations being * acked and committed, respectively. The callbacks are called in * order of receipt, so the safe callback may be triggered before the * complete callback, and vice versa. This is affected by journalling * on the OSDs. * * TODO: more complete documentation of this elsewhere (in the RADOS docs?) * * @note Read operations only get a complete callback. * @note BUG: this should check for ENOMEM instead of throwing an exception * * @param cb_arg application-defined data passed to the callback functions * @param cb_complete the function to be called when the operation is * in memory on all relpicas * @param cb_safe the function to be called when the operation is on * stable storage on all replicas * @param pc where to store the completion * @returns 0 */ CEPH_RADOS_API int rados_aio_create_completion(void *cb_arg, rados_callback_t cb_complete, rados_callback_t cb_safe, rados_completion_t *pc); /** * Block until an operation completes * * This means it is in memory on all replicas. * * @note BUG: this should be void * * @param c operation to wait for * @returns 0 */ CEPH_RADOS_API int rados_aio_wait_for_complete(rados_completion_t c); /** * Block until an operation is safe * * This means it is on stable storage on all replicas. * * @note BUG: this should be void * * @param c operation to wait for * @returns 0 */ CEPH_RADOS_API int rados_aio_wait_for_safe(rados_completion_t c); /** * Has an asynchronous operation completed? * * @warning This does not imply that the complete callback has * finished * * @param c async operation to inspect * @returns whether c is complete */ CEPH_RADOS_API int rados_aio_is_complete(rados_completion_t c); /** * Is an asynchronous operation safe? * * @warning This does not imply that the safe callback has * finished * * @param c async operation to inspect * @returns whether c is safe */ CEPH_RADOS_API int rados_aio_is_safe(rados_completion_t c); /** * Block until an operation completes and callback completes * * This means it is in memory on all replicas and can be read. * * @note BUG: this should be void * * @param c operation to wait for * @returns 0 */ CEPH_RADOS_API int rados_aio_wait_for_complete_and_cb(rados_completion_t c); /** * Block until an operation is safe and callback has completed * * This means it is on stable storage on all replicas. * * @note BUG: this should be void * * @param c operation to wait for * @returns 0 */ CEPH_RADOS_API int rados_aio_wait_for_safe_and_cb(rados_completion_t c); /** * Has an asynchronous operation and callback completed * * @param c async operation to inspect * @returns whether c is complete */ CEPH_RADOS_API int rados_aio_is_complete_and_cb(rados_completion_t c); /** * Is an asynchronous operation safe and has the callback completed * * @param c async operation to inspect * @returns whether c is safe */ CEPH_RADOS_API int rados_aio_is_safe_and_cb(rados_completion_t c); /** * Get the return value of an asychronous operation * * The return value is set when the operation is complete or safe, * whichever comes first. * * @pre The operation is safe or complete * * @note BUG: complete callback may never be called when the safe * message is received before the complete message * * @param c async operation to inspect * @returns return value of the operation */ CEPH_RADOS_API int rados_aio_get_return_value(rados_completion_t c); /** * Get the internal object version of the target of an asychronous operation * * The return value is set when the operation is complete or safe, * whichever comes first. * * @pre The operation is safe or complete * * @note BUG: complete callback may never be called when the safe * message is received before the complete message * * @param c async operation to inspect * @returns version number of the asychronous operation's target */ CEPH_RADOS_API uint64_t rados_aio_get_version(rados_completion_t c); /** * Release a completion * * Call this when you no longer need the completion. It may not be * freed immediately if the operation is not acked and committed. * * @param c completion to release */ CEPH_RADOS_API void rados_aio_release(rados_completion_t c); /** * Write data to an object asynchronously * * Queues the write and returns. The return value of the completion * will be 0 on success, negative error code on failure. * * @param io the context in which the write will occur * @param oid name of the object * @param completion what to do when the write is safe and complete * @param buf data to write * @param len length of the data, in bytes * @param off byte offset in the object to begin writing at * @returns 0 on success, -EROFS if the io context specifies a snap_seq * other than LIBRADOS_SNAP_HEAD */ CEPH_RADOS_API int rados_aio_write(rados_ioctx_t io, const char *oid, rados_completion_t completion, const char *buf, size_t len, uint64_t off); /** * Asynchronously append data to an object * * Queues the append and returns. * * The return value of the completion will be 0 on success, negative * error code on failure. * * @param io the context to operate in * @param oid the name of the object * @param completion what to do when the append is safe and complete * @param buf the data to append * @param len length of buf (in bytes) * @returns 0 on success, -EROFS if the io context specifies a snap_seq * other than LIBRADOS_SNAP_HEAD */ CEPH_RADOS_API int rados_aio_append(rados_ioctx_t io, const char *oid, rados_completion_t completion, const char *buf, size_t len); /** * Asynchronously write an entire object * * The object is filled with the provided data. If the object exists, * it is atomically truncated and then written. * Queues the write_full and returns. * * The return value of the completion will be 0 on success, negative * error code on failure. * * @param io the io context in which the write will occur * @param oid name of the object * @param completion what to do when the write_full is safe and complete * @param buf data to write * @param len length of the data, in bytes * @returns 0 on success, -EROFS if the io context specifies a snap_seq * other than LIBRADOS_SNAP_HEAD */ CEPH_RADOS_API int rados_aio_write_full(rados_ioctx_t io, const char *oid, rados_completion_t completion, const char *buf, size_t len); /** * Asynchronously write the same buffer multiple times * * Queues the writesame and returns. * * The return value of the completion will be 0 on success, negative * error code on failure. * * @param io the io context in which the write will occur * @param oid name of the object * @param completion what to do when the writesame is safe and complete * @param buf data to write * @param data_len length of the data, in bytes * @param write_len the total number of bytes to write * @param off byte offset in the object to begin writing at * @returns 0 on success, -EROFS if the io context specifies a snap_seq * other than LIBRADOS_SNAP_HEAD */ CEPH_RADOS_API int rados_aio_writesame(rados_ioctx_t io, const char *oid, rados_completion_t completion, const char *buf, size_t data_len, size_t write_len, uint64_t off); /** * Asynchronously remove an object * * Queues the remove and returns. * * The return value of the completion will be 0 on success, negative * error code on failure. * * @param io the context to operate in * @param oid the name of the object * @param completion what to do when the remove is safe and complete * @returns 0 on success, -EROFS if the io context specifies a snap_seq * other than LIBRADOS_SNAP_HEAD */ CEPH_RADOS_API int rados_aio_remove(rados_ioctx_t io, const char *oid, rados_completion_t completion); /** * Asynchronously read data from an object * * The io context determines the snapshot to read from, if any was set * by rados_ioctx_snap_set_read(). * * The return value of the completion will be number of bytes read on * success, negative error code on failure. * * @note only the 'complete' callback of the completion will be called. * * @param io the context in which to perform the read * @param oid the name of the object to read from * @param completion what to do when the read is complete * @param buf where to store the results * @param len the number of bytes to read * @param off the offset to start reading from in the object * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_read(rados_ioctx_t io, const char *oid, rados_completion_t completion, char *buf, size_t len, uint64_t off); /** * Block until all pending writes in an io context are safe * * This is not equivalent to calling rados_aio_wait_for_safe() on all * write completions, since this waits for the associated callbacks to * complete as well. * * @note BUG: always returns 0, should be void or accept a timeout * * @param io the context to flush * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_flush(rados_ioctx_t io); /** * Schedule a callback for when all currently pending * aio writes are safe. This is a non-blocking version of * rados_aio_flush(). * * @param io the context to flush * @param completion what to do when the writes are safe * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_flush_async(rados_ioctx_t io, rados_completion_t completion); /** * Asynchronously get object stats (size/mtime) * * @param io ioctx * @param o object name * @param completion what to do when the stat is complete * @param psize where to store object size * @param pmtime where to store modification time * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_stat(rados_ioctx_t io, const char *o, rados_completion_t completion, uint64_t *psize, time_t *pmtime); /** * Asynchronously compare an on-disk object range with a buffer * * @param io the context in which to perform the comparison * @param o the name of the object to compare with * @param completion what to do when the comparison is complete * @param cmp_buf buffer containing bytes to be compared with object contents * @param cmp_len length to compare and size of @c cmp_buf in bytes * @param off object byte offset at which to start the comparison * @returns 0 on success, negative error code on failure, * (-MAX_ERRNO - mismatch_off) on mismatch */ CEPH_RADOS_API int rados_aio_cmpext(rados_ioctx_t io, const char *o, rados_completion_t completion, const char *cmp_buf, size_t cmp_len, uint64_t off); /** * Cancel async operation * * @param io ioctx * @param completion completion handle * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_cancel(rados_ioctx_t io, rados_completion_t completion); /** * Asynchronously execute an OSD class method on an object * * The OSD has a plugin mechanism for performing complicated * operations on an object atomically. These plugins are called * classes. This function allows librados users to call the custom * methods. The input and output formats are defined by the class. * Classes in ceph.git can be found in src/cls subdirectories * * @param io the context in which to call the method * @param o name of the object * @param completion what to do when the exec completes * @param cls the name of the class * @param method the name of the method * @param in_buf where to find input * @param in_len length of in_buf in bytes * @param buf where to store output * @param out_len length of buf in bytes * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_exec(rados_ioctx_t io, const char *o, rados_completion_t completion, const char *cls, const char *method, const char *in_buf, size_t in_len, char *buf, size_t out_len); /** @} Asynchronous I/O */ /** * @name Asynchronous Xattrs * Extended attributes are stored as extended attributes on the files * representing an object on the OSDs. Thus, they have the same * limitations as the underlying filesystem. On ext4, this means that * the total data stored in xattrs cannot exceed 4KB. * * @{ */ /** * Asynchronously get the value of an extended attribute on an object. * * @param io the context in which the attribute is read * @param o name of the object * @param completion what to do when the getxattr completes * @param name which extended attribute to read * @param buf where to store the result * @param len size of buf in bytes * @returns length of xattr value on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_getxattr(rados_ioctx_t io, const char *o, rados_completion_t completion, const char *name, char *buf, size_t len); /** * Asynchronously set an extended attribute on an object. * * @param io the context in which xattr is set * @param o name of the object * @param completion what to do when the setxattr completes * @param name which extended attribute to set * @param buf what to store in the xattr * @param len the number of bytes in buf * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_setxattr(rados_ioctx_t io, const char *o, rados_completion_t completion, const char *name, const char *buf, size_t len); /** * Asynchronously delete an extended attribute from an object. * * @param io the context in which to delete the xattr * @param o the name of the object * @param completion what to do when the rmxattr completes * @param name which xattr to delete * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_rmxattr(rados_ioctx_t io, const char *o, rados_completion_t completion, const char *name); /** * Asynchronously start iterating over xattrs on an object. * * @post iter is a valid iterator * * @param io the context in which to list xattrs * @param oid name of the object * @param completion what to do when the getxattrs completes * @param iter where to store the iterator * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_getxattrs(rados_ioctx_t io, const char *oid, rados_completion_t completion, rados_xattrs_iter_t *iter); /** @} Asynchronous Xattrs */ /** * @name Watch/Notify * * Watch/notify is a protocol to help communicate among clients. It * can be used to sychronize client state. All that's needed is a * well-known object name (for example, rbd uses the header object of * an image). * * Watchers register an interest in an object, and receive all * notifies on that object. A notify attempts to communicate with all * clients watching an object, and blocks on the notifier until each * client responds or a timeout is reached. * * See rados_watch() and rados_notify() for more details. * * @{ */ /** * @typedef rados_watchcb_t * * Callback activated when a notify is received on a watched * object. * * @param opcode undefined * @param ver version of the watched object * @param arg application-specific data * * @note BUG: opcode is an internal detail that shouldn't be exposed * @note BUG: ver is unused */ typedef void (*rados_watchcb_t)(uint8_t opcode, uint64_t ver, void *arg); /** * @typedef rados_watchcb2_t * * Callback activated when a notify is received on a watched * object. * * @param arg opaque user-defined value provided to rados_watch2() * @param notify_id an id for this notify event * @param handle the watcher handle we are notifying * @param notifier_id the unique client id for the notifier * @param data payload from the notifier * @param datalen length of payload buffer */ typedef void (*rados_watchcb2_t)(void *arg, uint64_t notify_id, uint64_t handle, uint64_t notifier_id, void *data, size_t data_len); /** * @typedef rados_watcherrcb_t * * Callback activated when we encounter an error with the watch session. * This can happen when the location of the objects moves within the * cluster and we fail to register our watch with the new object location, * or when our connection with the object OSD is otherwise interrupted and * we may have missed notify events. * * @param pre opaque user-defined value provided to rados_watch2() * @param err error code */ typedef void (*rados_watcherrcb_t)(void *pre, uint64_t cookie, int err); /** * Register an interest in an object * * A watch operation registers the client as being interested in * notifications on an object. OSDs keep track of watches on * persistent storage, so they are preserved across cluster changes by * the normal recovery process. If the client loses its connection to * the primary OSD for a watched object, the watch will be removed * after 30 seconds. Watches are automatically reestablished when a new * connection is made, or a placement group switches OSDs. * * @note BUG: librados should provide a way for watchers to notice connection resets * @note BUG: the ver parameter does not work, and -ERANGE will never be returned * (See URL tracker.ceph.com/issues/2592) * * @param io the pool the object is in * @param o the object to watch * @param ver expected version of the object * @param cookie where to store the internal id assigned to this watch * @param watchcb what to do when a notify is received on this object * @param arg application defined data to pass when watchcb is called * @returns 0 on success, negative error code on failure * @returns -ERANGE if the version of the object is greater than ver */ CEPH_RADOS_API int rados_watch(rados_ioctx_t io, const char *o, uint64_t ver, uint64_t *cookie, rados_watchcb_t watchcb, void *arg) __attribute__((deprecated)); /** * Register an interest in an object * * A watch operation registers the client as being interested in * notifications on an object. OSDs keep track of watches on * persistent storage, so they are preserved across cluster changes by * the normal recovery process. If the client loses its connection to the * primary OSD for a watched object, the watch will be removed after * a timeout configured with osd_client_watch_timeout. * Watches are automatically reestablished when a new * connection is made, or a placement group switches OSDs. * * @param io the pool the object is in * @param o the object to watch * @param cookie where to store the internal id assigned to this watch * @param watchcb what to do when a notify is received on this object * @param watcherrcb what to do when the watch session encounters an error * @param arg opaque value to pass to the callback * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_watch2(rados_ioctx_t io, const char *o, uint64_t *cookie, rados_watchcb2_t watchcb, rados_watcherrcb_t watcherrcb, void *arg); /** * Register an interest in an object * * A watch operation registers the client as being interested in * notifications on an object. OSDs keep track of watches on * persistent storage, so they are preserved across cluster changes by * the normal recovery process. Watches are automatically reestablished when a new * connection is made, or a placement group switches OSDs. * * @param io the pool the object is in * @param o the object to watch * @param cookie where to store the internal id assigned to this watch * @param watchcb what to do when a notify is received on this object * @param watcherrcb what to do when the watch session encounters an error * @param timeout how many seconds the connection will keep after disconnection * @param arg opaque value to pass to the callback * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_watch3(rados_ioctx_t io, const char *o, uint64_t *cookie, rados_watchcb2_t watchcb, rados_watcherrcb_t watcherrcb, uint32_t timeout, void *arg); /** * Asynchronous register an interest in an object * * A watch operation registers the client as being interested in * notifications on an object. OSDs keep track of watches on * persistent storage, so they are preserved across cluster changes by * the normal recovery process. If the client loses its connection to * the primary OSD for a watched object, the watch will be removed * after 30 seconds. Watches are automatically reestablished when a new * connection is made, or a placement group switches OSDs. * * @param io the pool the object is in * @param o the object to watch * @param completion what to do when operation has been attempted * @param handle where to store the internal id assigned to this watch * @param watchcb what to do when a notify is received on this object * @param watcherrcb what to do when the watch session encounters an error * @param arg opaque value to pass to the callback * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_watch(rados_ioctx_t io, const char *o, rados_completion_t completion, uint64_t *handle, rados_watchcb2_t watchcb, rados_watcherrcb_t watcherrcb, void *arg); /** * Asynchronous register an interest in an object * * A watch operation registers the client as being interested in * notifications on an object. OSDs keep track of watches on * persistent storage, so they are preserved across cluster changes by * the normal recovery process. If the client loses its connection to * the primary OSD for a watched object, the watch will be removed * after the number of seconds that configured in timeout parameter. * Watches are automatically reestablished when a new * connection is made, or a placement group switches OSDs. * * @param io the pool the object is in * @param o the object to watch * @param completion what to do when operation has been attempted * @param handle where to store the internal id assigned to this watch * @param watchcb what to do when a notify is received on this object * @param watcherrcb what to do when the watch session encounters an error * @param timeout how many seconds the connection will keep after disconnection * @param arg opaque value to pass to the callback * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_watch2(rados_ioctx_t io, const char *o, rados_completion_t completion, uint64_t *handle, rados_watchcb2_t watchcb, rados_watcherrcb_t watcherrcb, uint32_t timeout, void *arg); /** * Check on the status of a watch * * Return the number of milliseconds since the watch was last confirmed. * Or, if there has been an error, return that. * * If there is an error, the watch is no longer valid, and should be * destroyed with rados_unwatch2(). The the user is still interested * in the object, a new watch should be created with rados_watch2(). * * @param io the pool the object is in * @param cookie the watch handle * @returns ms since last confirmed on success, negative error code on failure */ CEPH_RADOS_API int rados_watch_check(rados_ioctx_t io, uint64_t cookie); /** * Unregister an interest in an object * * Once this completes, no more notifies will be sent to us for this * watch. This should be called to clean up unneeded watchers. * * @param io the pool the object is in * @param o the name of the watched object (ignored) * @param cookie which watch to unregister * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_unwatch(rados_ioctx_t io, const char *o, uint64_t cookie) __attribute__((deprecated)); /** * Unregister an interest in an object * * Once this completes, no more notifies will be sent to us for this * watch. This should be called to clean up unneeded watchers. * * @param io the pool the object is in * @param cookie which watch to unregister * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_unwatch2(rados_ioctx_t io, uint64_t cookie); /** * Asynchronous unregister an interest in an object * * Once this completes, no more notifies will be sent to us for this * watch. This should be called to clean up unneeded watchers. * * @param io the pool the object is in * @param completion what to do when operation has been attempted * @param cookie which watch to unregister * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_unwatch(rados_ioctx_t io, uint64_t cookie, rados_completion_t completion); /** * Sychronously notify watchers of an object * * This blocks until all watchers of the object have received and * reacted to the notify, or a timeout is reached. * * @note BUG: the timeout is not changeable via the C API * @note BUG: the bufferlist is inaccessible in a rados_watchcb_t * * @param io the pool the object is in * @param o the name of the object * @param ver obsolete - just pass zero * @param buf data to send to watchers * @param buf_len length of buf in bytes * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_notify(rados_ioctx_t io, const char *o, uint64_t ver, const char *buf, int buf_len) __attribute__((deprecated)); /** * Sychronously notify watchers of an object * * This blocks until all watchers of the object have received and * reacted to the notify, or a timeout is reached. * * The reply buffer is optional. If specified, the client will get * back an encoded buffer that includes the ids of the clients that * acknowledged the notify as well as their notify ack payloads (if * any). Clients that timed out are not included. Even clients that * do not include a notify ack payload are included in the list but * have a 0-length payload associated with them. The format: * * le32 num_acks * { * le64 gid global id for the client (for client.1234 that's 1234) * le64 cookie cookie for the client * le32 buflen length of reply message buffer * u8 * buflen payload * } * num_acks * le32 num_timeouts * { * le64 gid global id for the client * le64 cookie cookie for the client * } * num_timeouts * * Note: There may be multiple instances of the same gid if there are * multiple watchers registered via the same client. * * Note: The buffer must be released with rados_buffer_free() when the * user is done with it. * * Note: Since the result buffer includes clients that time out, it * will be set even when rados_notify() returns an error code (like * -ETIMEDOUT). * * @param io the pool the object is in * @param completion what to do when operation has been attempted * @param o the name of the object * @param buf data to send to watchers * @param buf_len length of buf in bytes * @param timeout_ms notify timeout (in ms) * @param reply_buffer pointer to reply buffer pointer (free with rados_buffer_free) * @param reply_buffer_len pointer to size of reply buffer * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_notify(rados_ioctx_t io, const char *o, rados_completion_t completion, const char *buf, int buf_len, uint64_t timeout_ms, char **reply_buffer, size_t *reply_buffer_len); CEPH_RADOS_API int rados_notify2(rados_ioctx_t io, const char *o, const char *buf, int buf_len, uint64_t timeout_ms, char **reply_buffer, size_t *reply_buffer_len); /** * Acknolwedge receipt of a notify * * @param io the pool the object is in * @param o the name of the object * @param notify_id the notify_id we got on the watchcb2_t callback * @param cookie the watcher handle * @param buf payload to return to notifier (optional) * @param buf_len payload length * @returns 0 on success */ CEPH_RADOS_API int rados_notify_ack(rados_ioctx_t io, const char *o, uint64_t notify_id, uint64_t cookie, const char *buf, int buf_len); /** * Flush watch/notify callbacks * * This call will block until all pending watch/notify callbacks have * been executed and the queue is empty. It should usually be called * after shutting down any watches before shutting down the ioctx or * librados to ensure that any callbacks do not misuse the ioctx (for * example by calling rados_notify_ack after the ioctx has been * destroyed). * * @param cluster the cluster handle */ CEPH_RADOS_API int rados_watch_flush(rados_t cluster); /** * Flush watch/notify callbacks * * This call will be nonblock, and the completion will be called * until all pending watch/notify callbacks have been executed and * the queue is empty. It should usually be called after shutting * down any watches before shutting down the ioctx or * librados to ensure that any callbacks do not misuse the ioctx (for * example by calling rados_notify_ack after the ioctx has been * destroyed). * * @param cluster the cluster handle * @param completion what to do when operation has been attempted */ CEPH_RADOS_API int rados_aio_watch_flush(rados_t cluster, rados_completion_t completion); /** @} Watch/Notify */ /** * Pin an object in the cache tier * * When an object is pinned in the cache tier, it stays in the cache * tier, and won't be flushed out. * * @param io the pool the object is in * @param o the object id * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_cache_pin(rados_ioctx_t io, const char *o); /** * Unpin an object in the cache tier * * After an object is unpinned in the cache tier, it can be flushed out * * @param io the pool the object is in * @param o the object id * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_cache_unpin(rados_ioctx_t io, const char *o); /** * @name Hints * * @{ */ /** * Set allocation hint for an object * * This is an advisory operation, it will always succeed (as if it was * submitted with a LIBRADOS_OP_FLAG_FAILOK flag set) and is not * guaranteed to do anything on the backend. * * @param io the pool the object is in * @param o the name of the object * @param expected_object_size expected size of the object, in bytes * @param expected_write_size expected size of writes to the object, in bytes * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_set_alloc_hint(rados_ioctx_t io, const char *o, uint64_t expected_object_size, uint64_t expected_write_size); /** * Set allocation hint for an object * * This is an advisory operation, it will always succeed (as if it was * submitted with a LIBRADOS_OP_FLAG_FAILOK flag set) and is not * guaranteed to do anything on the backend. * * @param io the pool the object is in * @param o the name of the object * @param expected_object_size expected size of the object, in bytes * @param expected_write_size expected size of writes to the object, in bytes * @param flags hints about future IO patterns * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_set_alloc_hint2(rados_ioctx_t io, const char *o, uint64_t expected_object_size, uint64_t expected_write_size, uint32_t flags); /** @} Hints */ /** * @name Object Operations * * A single rados operation can do multiple operations on one object * atomically. The whole operation will succeed or fail, and no partial * results will be visible. * * Operations may be either reads, which can return data, or writes, * which cannot. The effects of writes are applied and visible all at * once, so an operation that sets an xattr and then checks its value * will not see the updated value. * * @{ */ /** * Create a new rados_write_op_t write operation. This will store all actions * to be performed atomically. You must call rados_release_write_op when you are * finished with it. * * @returns non-NULL on success, NULL on memory allocation error. */ CEPH_RADOS_API rados_write_op_t rados_create_write_op(void); /** * Free a rados_write_op_t, must be called when you're done with it. * @param write_op operation to deallocate, created with rados_create_write_op */ CEPH_RADOS_API void rados_release_write_op(rados_write_op_t write_op); /** * Set flags for the last operation added to this write_op. * At least one op must have been added to the write_op. * @param write_op operation to add this action to * @param flags see librados.h constants beginning with LIBRADOS_OP_FLAG */ CEPH_RADOS_API void rados_write_op_set_flags(rados_write_op_t write_op, int flags); /** * Ensure that the object exists before writing * @param write_op operation to add this action to */ CEPH_RADOS_API void rados_write_op_assert_exists(rados_write_op_t write_op); /** * Ensure that the object exists and that its internal version * number is equal to "ver" before writing. "ver" should be a * version number previously obtained with rados_get_last_version(). * - If the object's version is greater than the asserted version * then rados_write_op_operate will return -ERANGE instead of * executing the op. * - If the object's version is less than the asserted version * then rados_write_op_operate will return -EOVERFLOW instead * of executing the op. * @param write_op operation to add this action to * @param ver object version number */ CEPH_RADOS_API void rados_write_op_assert_version(rados_write_op_t write_op, uint64_t ver); /** * Ensure that given object range (extent) satisfies comparison. * * @param write_op operation to add this action to * @param cmp_buf buffer containing bytes to be compared with object contents * @param cmp_len length to compare and size of @c cmp_buf in bytes * @param off object byte offset at which to start the comparison * @param prval returned result of comparison, 0 on success, negative error code * on failure, (-MAX_ERRNO - mismatch_off) on mismatch */ CEPH_RADOS_API void rados_write_op_cmpext(rados_write_op_t write_op, const char *cmp_buf, size_t cmp_len, uint64_t off, int *prval); /** * Ensure that given xattr satisfies comparison. * If the comparison is not satisfied, the return code of the * operation will be -ECANCELED * @param write_op operation to add this action to * @param name name of the xattr to look up * @param comparison_operator currently undocumented, look for * LIBRADOS_CMPXATTR_OP_EQ in librados.h * @param value buffer to compare actual xattr value to * @param value_len length of buffer to compare actual xattr value to */ CEPH_RADOS_API void rados_write_op_cmpxattr(rados_write_op_t write_op, const char *name, uint8_t comparison_operator, const char *value, size_t value_len); /** * Ensure that the an omap value satisfies a comparison, * with the supplied value on the right hand side (i.e. * for OP_LT, the comparison is actual_value < value. * * @param write_op operation to add this action to * @param key which omap value to compare * @param comparison_operator one of LIBRADOS_CMPXATTR_OP_EQ, LIBRADOS_CMPXATTR_OP_LT, or LIBRADOS_CMPXATTR_OP_GT * @param val value to compare with * @param val_len length of value in bytes * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_write_op_omap_cmp(rados_write_op_t write_op, const char *key, uint8_t comparison_operator, const char *val, size_t val_len, int *prval); /** * Ensure that the an omap value satisfies a comparison, * with the supplied value on the right hand side (i.e. * for OP_LT, the comparison is actual_value < value. * * @param write_op operation to add this action to * @param key which omap value to compare * @param comparison_operator one of LIBRADOS_CMPXATTR_OP_EQ, LIBRADOS_CMPXATTR_OP_LT, or LIBRADOS_CMPXATTR_OP_GT * @param val value to compare with * @param key_len length of key in bytes * @param val_len length of value in bytes * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_write_op_omap_cmp2(rados_write_op_t write_op, const char *key, uint8_t comparison_operator, const char *val, size_t key_len, size_t val_len, int *prval); /** * Set an xattr * @param write_op operation to add this action to * @param name name of the xattr * @param value buffer to set xattr to * @param value_len length of buffer to set xattr to */ CEPH_RADOS_API void rados_write_op_setxattr(rados_write_op_t write_op, const char *name, const char *value, size_t value_len); /** * Remove an xattr * @param write_op operation to add this action to * @param name name of the xattr to remove */ CEPH_RADOS_API void rados_write_op_rmxattr(rados_write_op_t write_op, const char *name); /** * Create the object * @param write_op operation to add this action to * @param exclusive set to either LIBRADOS_CREATE_EXCLUSIVE or LIBRADOS_CREATE_IDEMPOTENT * will error if the object already exists. * @param category category string (DEPRECATED, HAS NO EFFECT) */ CEPH_RADOS_API void rados_write_op_create(rados_write_op_t write_op, int exclusive, const char* category); /** * Write to offset * @param write_op operation to add this action to * @param offset offset to write to * @param buffer bytes to write * @param len length of buffer */ CEPH_RADOS_API void rados_write_op_write(rados_write_op_t write_op, const char *buffer, size_t len, uint64_t offset); /** * Write whole object, atomically replacing it. * @param write_op operation to add this action to * @param buffer bytes to write * @param len length of buffer */ CEPH_RADOS_API void rados_write_op_write_full(rados_write_op_t write_op, const char *buffer, size_t len); /** * Write the same buffer multiple times * @param write_op operation to add this action to * @param buffer bytes to write * @param data_len length of buffer * @param write_len total number of bytes to write, as a multiple of @c data_len * @param offset offset to write to */ CEPH_RADOS_API void rados_write_op_writesame(rados_write_op_t write_op, const char *buffer, size_t data_len, size_t write_len, uint64_t offset); /** * Append to end of object. * @param write_op operation to add this action to * @param buffer bytes to write * @param len length of buffer */ CEPH_RADOS_API void rados_write_op_append(rados_write_op_t write_op, const char *buffer, size_t len); /** * Remove object * @param write_op operation to add this action to */ CEPH_RADOS_API void rados_write_op_remove(rados_write_op_t write_op); /** * Truncate an object * @param write_op operation to add this action to * @param offset Offset to truncate to */ CEPH_RADOS_API void rados_write_op_truncate(rados_write_op_t write_op, uint64_t offset); /** * Zero part of an object * @param write_op operation to add this action to * @param offset Offset to zero * @param len length to zero */ CEPH_RADOS_API void rados_write_op_zero(rados_write_op_t write_op, uint64_t offset, uint64_t len); /** * Execute an OSD class method on an object * See rados_exec() for general description. * * @param write_op operation to add this action to * @param cls the name of the class * @param method the name of the method * @param in_buf where to find input * @param in_len length of in_buf in bytes * @param prval where to store the return value from the method */ CEPH_RADOS_API void rados_write_op_exec(rados_write_op_t write_op, const char *cls, const char *method, const char *in_buf, size_t in_len, int *prval); /** * Set key/value pairs on an object * * @param write_op operation to add this action to * @param keys array of null-terminated char arrays representing keys to set * @param vals array of pointers to values to set * @param lens array of lengths corresponding to each value * @param num number of key/value pairs to set */ CEPH_RADOS_API void rados_write_op_omap_set(rados_write_op_t write_op, char const* const* keys, char const* const* vals, const size_t *lens, size_t num); /** * Set key/value pairs on an object * * @param write_op operation to add this action to * @param keys array of null-terminated char arrays representing keys to set * @param vals array of pointers to values to set * @param key_lens array of lengths corresponding to each key * @param val_lens array of lengths corresponding to each value * @param num number of key/value pairs to set */ CEPH_RADOS_API void rados_write_op_omap_set2(rados_write_op_t write_op, char const* const* keys, char const* const* vals, const size_t *key_lens, const size_t *val_lens, size_t num); /** * Remove key/value pairs from an object * * @param write_op operation to add this action to * @param keys array of null-terminated char arrays representing keys to remove * @param keys_len number of key/value pairs to remove */ CEPH_RADOS_API void rados_write_op_omap_rm_keys(rados_write_op_t write_op, char const* const* keys, size_t keys_len); /** * Remove key/value pairs from an object * * @param write_op operation to add this action to * @param keys array of char arrays representing keys to remove * @param key_lens array of size_t values representing length of each key * @param keys_len number of key/value pairs to remove */ CEPH_RADOS_API void rados_write_op_omap_rm_keys2(rados_write_op_t write_op, char const* const* keys, const size_t* key_lens, size_t keys_len); /** * Remove all key/value pairs from an object * * @param write_op operation to add this action to */ CEPH_RADOS_API void rados_write_op_omap_clear(rados_write_op_t write_op); /** * Set allocation hint for an object * * @param write_op operation to add this action to * @param expected_object_size expected size of the object, in bytes * @param expected_write_size expected size of writes to the object, in bytes */ CEPH_RADOS_API void rados_write_op_set_alloc_hint(rados_write_op_t write_op, uint64_t expected_object_size, uint64_t expected_write_size); /** * Set allocation hint for an object * * @param write_op operation to add this action to * @param expected_object_size expected size of the object, in bytes * @param expected_write_size expected size of writes to the object, in bytes * @param flags hints about future IO patterns */ CEPH_RADOS_API void rados_write_op_set_alloc_hint2(rados_write_op_t write_op, uint64_t expected_object_size, uint64_t expected_write_size, uint32_t flags); /** * Perform a write operation synchronously * @param write_op operation to perform * @param io the ioctx that the object is in * @param oid the object id * @param mtime the time to set the mtime to, NULL for the current time * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*) */ CEPH_RADOS_API int rados_write_op_operate(rados_write_op_t write_op, rados_ioctx_t io, const char *oid, time_t *mtime, int flags); /** * Perform a write operation synchronously * @param write_op operation to perform * @param io the ioctx that the object is in * @param oid the object id * @param mtime the time to set the mtime to, NULL for the current time * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*) */ CEPH_RADOS_API int rados_write_op_operate2(rados_write_op_t write_op, rados_ioctx_t io, const char *oid, struct timespec *mtime, int flags); /** * Perform a write operation asynchronously * @param write_op operation to perform * @param io the ioctx that the object is in * @param completion what to do when operation has been attempted * @param oid the object id * @param mtime the time to set the mtime to, NULL for the current time * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*) */ CEPH_RADOS_API int rados_aio_write_op_operate(rados_write_op_t write_op, rados_ioctx_t io, rados_completion_t completion, const char *oid, time_t *mtime, int flags); /** * Create a new rados_read_op_t write operation. This will store all * actions to be performed atomically. You must call * rados_release_read_op when you are finished with it (after it * completes, or you decide not to send it in the first place). * * @returns non-NULL on success, NULL on memory allocation error. */ CEPH_RADOS_API rados_read_op_t rados_create_read_op(void); /** * Free a rados_read_op_t, must be called when you're done with it. * @param read_op operation to deallocate, created with rados_create_read_op */ CEPH_RADOS_API void rados_release_read_op(rados_read_op_t read_op); /** * Set flags for the last operation added to this read_op. * At least one op must have been added to the read_op. * @param read_op operation to add this action to * @param flags see librados.h constants beginning with LIBRADOS_OP_FLAG */ CEPH_RADOS_API void rados_read_op_set_flags(rados_read_op_t read_op, int flags); /** * Ensure that the object exists before reading * @param read_op operation to add this action to */ CEPH_RADOS_API void rados_read_op_assert_exists(rados_read_op_t read_op); /** * Ensure that the object exists and that its internal version * number is equal to "ver" before reading. "ver" should be a * version number previously obtained with rados_get_last_version(). * - If the object's version is greater than the asserted version * then rados_read_op_operate will return -ERANGE instead of * executing the op. * - If the object's version is less than the asserted version * then rados_read_op_operate will return -EOVERFLOW instead * of executing the op. * @param read_op operation to add this action to * @param ver object version number */ CEPH_RADOS_API void rados_read_op_assert_version(rados_read_op_t read_op, uint64_t ver); /** * Ensure that given object range (extent) satisfies comparison. * * @param read_op operation to add this action to * @param cmp_buf buffer containing bytes to be compared with object contents * @param cmp_len length to compare and size of @c cmp_buf in bytes * @param off object byte offset at which to start the comparison * @param prval returned result of comparison, 0 on success, negative error code * on failure, (-MAX_ERRNO - mismatch_off) on mismatch */ CEPH_RADOS_API void rados_read_op_cmpext(rados_read_op_t read_op, const char *cmp_buf, size_t cmp_len, uint64_t off, int *prval); /** * Ensure that the an xattr satisfies a comparison * If the comparison is not satisfied, the return code of the * operation will be -ECANCELED * @param read_op operation to add this action to * @param name name of the xattr to look up * @param comparison_operator currently undocumented, look for * LIBRADOS_CMPXATTR_OP_EQ in librados.h * @param value buffer to compare actual xattr value to * @param value_len length of buffer to compare actual xattr value to */ CEPH_RADOS_API void rados_read_op_cmpxattr(rados_read_op_t read_op, const char *name, uint8_t comparison_operator, const char *value, size_t value_len); /** * Start iterating over xattrs on an object. * * @param read_op operation to add this action to * @param iter where to store the iterator * @param prval where to store the return value of this action */ CEPH_RADOS_API void rados_read_op_getxattrs(rados_read_op_t read_op, rados_xattrs_iter_t *iter, int *prval); /** * Ensure that the an omap value satisfies a comparison, * with the supplied value on the right hand side (i.e. * for OP_LT, the comparison is actual_value < value. * * @param read_op operation to add this action to * @param key which omap value to compare * @param comparison_operator one of LIBRADOS_CMPXATTR_OP_EQ, LIBRADOS_CMPXATTR_OP_LT, or LIBRADOS_CMPXATTR_OP_GT * @param val value to compare with * @param val_len length of value in bytes * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_read_op_omap_cmp(rados_read_op_t read_op, const char *key, uint8_t comparison_operator, const char *val, size_t val_len, int *prval); /** * Ensure that the an omap value satisfies a comparison, * with the supplied value on the right hand side (i.e. * for OP_LT, the comparison is actual_value < value. * * @param read_op operation to add this action to * @param key which omap value to compare * @param comparison_operator one of LIBRADOS_CMPXATTR_OP_EQ, LIBRADOS_CMPXATTR_OP_LT, or LIBRADOS_CMPXATTR_OP_GT * @param val value to compare with * @param key_len length of key in bytes * @param val_len length of value in bytes * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_read_op_omap_cmp2(rados_read_op_t read_op, const char *key, uint8_t comparison_operator, const char *val, size_t key_len, size_t val_len, int *prval); /** * Get object size and mtime * @param read_op operation to add this action to * @param psize where to store object size * @param pmtime where to store modification time * @param prval where to store the return value of this action */ CEPH_RADOS_API void rados_read_op_stat(rados_read_op_t read_op, uint64_t *psize, time_t *pmtime, int *prval); /** * Read bytes from offset into buffer. * * prlen will be filled with the number of bytes read if successful. * A short read can only occur if the read reaches the end of the * object. * * @param read_op operation to add this action to * @param offset offset to read from * @param len length of buffer * @param buffer where to put the data * @param bytes_read where to store the number of bytes read by this action * @param prval where to store the return value of this action */ CEPH_RADOS_API void rados_read_op_read(rados_read_op_t read_op, uint64_t offset, size_t len, char *buffer, size_t *bytes_read, int *prval); /** * Compute checksum from object data * * @param read_op operation to add this action to * @param type the checksum algorithm to utilize * @param init_value the init value for the algorithm * @param init_value_len the length of the init value * @param offset the offset to start checksumming in the object * @param len the number of bytes to checksum * @param chunk_size optional length-aligned chunk size for checksums * @param pchecksum where to store the checksum result for this action * @param checksum_len the number of bytes available for the result * @param prval where to store the return value for this action */ CEPH_RADOS_API void rados_read_op_checksum(rados_read_op_t read_op, rados_checksum_type_t type, const char *init_value, size_t init_value_len, uint64_t offset, size_t len, size_t chunk_size, char *pchecksum, size_t checksum_len, int *prval); /** * Execute an OSD class method on an object * See rados_exec() for general description. * * The output buffer is allocated on the heap; the caller is * expected to release that memory with rados_buffer_free(). The * buffer and length pointers can all be NULL, in which case they are * not filled in. * * @param read_op operation to add this action to * @param cls the name of the class * @param method the name of the method * @param in_buf where to find input * @param in_len length of in_buf in bytes * @param out_buf where to put librados-allocated output buffer * @param out_len length of out_buf in bytes * @param prval where to store the return value from the method */ CEPH_RADOS_API void rados_read_op_exec(rados_read_op_t read_op, const char *cls, const char *method, const char *in_buf, size_t in_len, char **out_buf, size_t *out_len, int *prval); /** * Execute an OSD class method on an object * See rados_exec() for general description. * * If the output buffer is too small, prval will * be set to -ERANGE and used_len will be 0. * * @param read_op operation to add this action to * @param cls the name of the class * @param method the name of the method * @param in_buf where to find input * @param in_len length of in_buf in bytes * @param out_buf user-provided buffer to read into * @param out_len length of out_buf in bytes * @param used_len where to store the number of bytes read into out_buf * @param prval where to store the return value from the method */ CEPH_RADOS_API void rados_read_op_exec_user_buf(rados_read_op_t read_op, const char *cls, const char *method, const char *in_buf, size_t in_len, char *out_buf, size_t out_len, size_t *used_len, int *prval); /** * Start iterating over key/value pairs on an object. * * They will be returned sorted by key. * * @param read_op operation to add this action to * @param start_after list keys starting after start_after * @param filter_prefix list only keys beginning with filter_prefix * @param max_return list no more than max_return key/value pairs * @param iter where to store the iterator * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_read_op_omap_get_vals(rados_read_op_t read_op, const char *start_after, const char *filter_prefix, uint64_t max_return, rados_omap_iter_t *iter, int *prval) __attribute__((deprecated)); /* use v2 below */ /** * Start iterating over key/value pairs on an object. * * They will be returned sorted by key. * * @param read_op operation to add this action to * @param start_after list keys starting after start_after * @param filter_prefix list only keys beginning with filter_prefix * @param max_return list no more than max_return key/value pairs * @param iter where to store the iterator * @param pmore flag indicating whether there are more keys to fetch * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_read_op_omap_get_vals2(rados_read_op_t read_op, const char *start_after, const char *filter_prefix, uint64_t max_return, rados_omap_iter_t *iter, unsigned char *pmore, int *prval); /** * Start iterating over keys on an object. * * They will be returned sorted by key, and the iterator * will fill in NULL for all values if specified. * * @param read_op operation to add this action to * @param start_after list keys starting after start_after * @param max_return list no more than max_return keys * @param iter where to store the iterator * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_read_op_omap_get_keys(rados_read_op_t read_op, const char *start_after, uint64_t max_return, rados_omap_iter_t *iter, int *prval) __attribute__((deprecated)); /* use v2 below */ /** * Start iterating over keys on an object. * * They will be returned sorted by key, and the iterator * will fill in NULL for all values if specified. * * @param read_op operation to add this action to * @param start_after list keys starting after start_after * @param max_return list no more than max_return keys * @param iter where to store the iterator * @param pmore flag indicating whether there are more keys to fetch * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_read_op_omap_get_keys2(rados_read_op_t read_op, const char *start_after, uint64_t max_return, rados_omap_iter_t *iter, unsigned char *pmore, int *prval); /** * Start iterating over specific key/value pairs * * They will be returned sorted by key. * * @param read_op operation to add this action to * @param keys array of pointers to null-terminated keys to get * @param keys_len the number of strings in keys * @param iter where to store the iterator * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_read_op_omap_get_vals_by_keys(rados_read_op_t read_op, char const* const* keys, size_t keys_len, rados_omap_iter_t *iter, int *prval); /** * Start iterating over specific key/value pairs * * They will be returned sorted by key. * * @param read_op operation to add this action to * @param keys array of pointers to keys to get * @param num_keys the number of strings in keys * @param key_lens array of size_t's describing each key len (in bytes) * @param iter where to store the iterator * @param prval where to store the return value from this action */ CEPH_RADOS_API void rados_read_op_omap_get_vals_by_keys2(rados_read_op_t read_op, char const* const* keys, size_t num_keys, const size_t* key_lens, rados_omap_iter_t *iter, int *prval); /** * Perform a read operation synchronously * @param read_op operation to perform * @param io the ioctx that the object is in * @param oid the object id * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*) */ CEPH_RADOS_API int rados_read_op_operate(rados_read_op_t read_op, rados_ioctx_t io, const char *oid, int flags); /** * Perform a read operation asynchronously * @param read_op operation to perform * @param io the ioctx that the object is in * @param completion what to do when operation has been attempted * @param oid the object id * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*) */ CEPH_RADOS_API int rados_aio_read_op_operate(rados_read_op_t read_op, rados_ioctx_t io, rados_completion_t completion, const char *oid, int flags); /** @} Object Operations */ /** * Take an exclusive lock on an object. * * @param io the context to operate in * @param oid the name of the object * @param name the name of the lock * @param cookie user-defined identifier for this instance of the lock * @param desc user-defined lock description * @param duration the duration of the lock. Set to NULL for infinite duration. * @param flags lock flags * @returns 0 on success, negative error code on failure * @returns -EBUSY if the lock is already held by another (client, cookie) pair * @returns -EEXIST if the lock is already held by the same (client, cookie) pair */ CEPH_RADOS_API int rados_lock_exclusive(rados_ioctx_t io, const char * oid, const char * name, const char * cookie, const char * desc, struct timeval * duration, uint8_t flags); /** * Take a shared lock on an object. * * @param io the context to operate in * @param o the name of the object * @param name the name of the lock * @param cookie user-defined identifier for this instance of the lock * @param tag The tag of the lock * @param desc user-defined lock description * @param duration the duration of the lock. Set to NULL for infinite duration. * @param flags lock flags * @returns 0 on success, negative error code on failure * @returns -EBUSY if the lock is already held by another (client, cookie) pair * @returns -EEXIST if the lock is already held by the same (client, cookie) pair */ CEPH_RADOS_API int rados_lock_shared(rados_ioctx_t io, const char * o, const char * name, const char * cookie, const char * tag, const char * desc, struct timeval * duration, uint8_t flags); /** * Release a shared or exclusive lock on an object. * * @param io the context to operate in * @param o the name of the object * @param name the name of the lock * @param cookie user-defined identifier for the instance of the lock * @returns 0 on success, negative error code on failure * @returns -ENOENT if the lock is not held by the specified (client, cookie) pair */ CEPH_RADOS_API int rados_unlock(rados_ioctx_t io, const char *o, const char *name, const char *cookie); /** * Asynchronous release a shared or exclusive lock on an object. * * @param io the context to operate in * @param o the name of the object * @param name the name of the lock * @param cookie user-defined identifier for the instance of the lock * @param completion what to do when operation has been attempted * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_aio_unlock(rados_ioctx_t io, const char *o, const char *name, const char *cookie, rados_completion_t completion); /** * List clients that have locked the named object lock and information about * the lock. * * The number of bytes required in each buffer is put in the * corresponding size out parameter. If any of the provided buffers * are too short, -ERANGE is returned after these sizes are filled in. * * @param io the context to operate in * @param o the name of the object * @param name the name of the lock * @param exclusive where to store whether the lock is exclusive (1) or shared (0) * @param tag where to store the tag associated with the object lock * @param tag_len number of bytes in tag buffer * @param clients buffer in which locker clients are stored, separated by '\0' * @param clients_len number of bytes in the clients buffer * @param cookies buffer in which locker cookies are stored, separated by '\0' * @param cookies_len number of bytes in the cookies buffer * @param addrs buffer in which locker addresses are stored, separated by '\0' * @param addrs_len number of bytes in the clients buffer * @returns number of lockers on success, negative error code on failure * @returns -ERANGE if any of the buffers are too short */ CEPH_RADOS_API ssize_t rados_list_lockers(rados_ioctx_t io, const char *o, const char *name, int *exclusive, char *tag, size_t *tag_len, char *clients, size_t *clients_len, char *cookies, size_t *cookies_len, char *addrs, size_t *addrs_len); /** * Releases a shared or exclusive lock on an object, which was taken by the * specified client. * * @param io the context to operate in * @param o the name of the object * @param name the name of the lock * @param client the client currently holding the lock * @param cookie user-defined identifier for the instance of the lock * @returns 0 on success, negative error code on failure * @returns -ENOENT if the lock is not held by the specified (client, cookie) pair * @returns -EINVAL if the client cannot be parsed */ CEPH_RADOS_API int rados_break_lock(rados_ioctx_t io, const char *o, const char *name, const char *client, const char *cookie); /** * Blacklists the specified client from the OSDs * * @param cluster cluster handle * @param client_address client address * @param expire_seconds number of seconds to blacklist (0 for default) * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_blacklist_add(rados_t cluster, char *client_address, uint32_t expire_seconds); /** * Gets addresses of the RADOS session, suitable for blacklisting. * * @param cluster cluster handle * @param addrs the output string. * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_getaddrs(rados_t cluster, char** addrs); CEPH_RADOS_API void rados_set_osdmap_full_try(rados_ioctx_t io); CEPH_RADOS_API void rados_unset_osdmap_full_try(rados_ioctx_t io); /** * Enable an application on a pool * * @param io pool ioctx * @param app_name application name * @param force 0 if only single application per pool * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_application_enable(rados_ioctx_t io, const char *app_name, int force); /** * List all enabled applications * * If the provided buffer is too short, the required length is filled in and * -ERANGE is returned. Otherwise, the buffers are filled with the application * names, with a '\0' after each. * * @param io pool ioctx * @param values buffer in which to store application names * @param values_len number of bytes in values buffer * @returns 0 on success, negative error code on failure * @returns -ERANGE if either buffer is too short */ CEPH_RADOS_API int rados_application_list(rados_ioctx_t io, char *values, size_t *values_len); /** * Get application metadata value from pool * * @param io pool ioctx * @param app_name application name * @param key metadata key * @param value result buffer * @param value_len maximum len of value * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_application_metadata_get(rados_ioctx_t io, const char *app_name, const char *key, char *value, size_t *value_len); /** * Set application metadata on a pool * * @param io pool ioctx * @param app_name application name * @param key metadata key * @param value metadata key * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_application_metadata_set(rados_ioctx_t io, const char *app_name, const char *key, const char *value); /** * Remove application metadata from a pool * * @param io pool ioctx * @param app_name application name * @param key metadata key * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_application_metadata_remove(rados_ioctx_t io, const char *app_name, const char *key); /** * List all metadata key/value pairs associated with an application. * * This iterates over all metadata, key_len and val_len are filled in * with the number of bytes put into the keys and values buffers. * * If the provided buffers are too short, the required lengths are filled * in and -ERANGE is returned. Otherwise, the buffers are filled with * the keys and values of the metadata, with a '\0' after each. * * @param io pool ioctx * @param app_name application name * @param keys buffer in which to store key names * @param key_len number of bytes in keys buffer * @param values buffer in which to store values * @param vals_len number of bytes in values buffer * @returns 0 on success, negative error code on failure * @returns -ERANGE if either buffer is too short */ CEPH_RADOS_API int rados_application_metadata_list(rados_ioctx_t io, const char *app_name, char *keys, size_t *key_len, char *values, size_t *vals_len); /** * @name Mon/OSD/PG Commands * * These interfaces send commands relating to the monitor, OSD, or PGs. * * @{ */ /** * Send monitor command. * * @note Takes command string in carefully-formatted JSON; must match * defined commands, types, etc. * * The result buffers are allocated on the heap; the caller is * expected to release that memory with rados_buffer_free(). The * buffer and length pointers can all be NULL, in which case they are * not filled in. * * @param cluster cluster handle * @param cmd an array of char *'s representing the command * @param cmdlen count of valid entries in cmd * @param inbuf any bulk input data (crush map, etc.) * @param inbuflen input buffer length * @param outbuf double pointer to output buffer * @param outbuflen pointer to output buffer length * @param outs double pointer to status string * @param outslen pointer to status string length * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_mon_command(rados_t cluster, const char **cmd, size_t cmdlen, const char *inbuf, size_t inbuflen, char **outbuf, size_t *outbuflen, char **outs, size_t *outslen); /** * Send ceph-mgr command. * * @note Takes command string in carefully-formatted JSON; must match * defined commands, types, etc. * * The result buffers are allocated on the heap; the caller is * expected to release that memory with rados_buffer_free(). The * buffer and length pointers can all be NULL, in which case they are * not filled in. * * @param cluster cluster handle * @param cmd an array of char *'s representing the command * @param cmdlen count of valid entries in cmd * @param inbuf any bulk input data (crush map, etc.) * @param inbuflen input buffer length * @param outbuf double pointer to output buffer * @param outbuflen pointer to output buffer length * @param outs double pointer to status string * @param outslen pointer to status string length * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_mgr_command(rados_t cluster, const char **cmd, size_t cmdlen, const char *inbuf, size_t inbuflen, char **outbuf, size_t *outbuflen, char **outs, size_t *outslen); /** * Send monitor command to a specific monitor. * * @note Takes command string in carefully-formatted JSON; must match * defined commands, types, etc. * * The result buffers are allocated on the heap; the caller is * expected to release that memory with rados_buffer_free(). The * buffer and length pointers can all be NULL, in which case they are * not filled in. * * @param cluster cluster handle * @param name target monitor's name * @param cmd an array of char *'s representing the command * @param cmdlen count of valid entries in cmd * @param inbuf any bulk input data (crush map, etc.) * @param inbuflen input buffer length * @param outbuf double pointer to output buffer * @param outbuflen pointer to output buffer length * @param outs double pointer to status string * @param outslen pointer to status string length * @returns 0 on success, negative error code on failure */ CEPH_RADOS_API int rados_mon_command_target(rados_t cluster, const char *name, const char **cmd, size_t cmdlen, const char *inbuf, size_t inbuflen, char **outbuf, size_t *outbuflen, char **outs, size_t *outslen); /** * free a rados-allocated buffer * * Release memory allocated by librados calls like rados_mon_command(). * * @param buf buffer pointer */ CEPH_RADOS_API void rados_buffer_free(char *buf); CEPH_RADOS_API int rados_osd_command(rados_t cluster, int osdid, const char **cmd, size_t cmdlen, const char *inbuf, size_t inbuflen, char **outbuf, size_t *outbuflen, char **outs, size_t *outslen); CEPH_RADOS_API int rados_pg_command(rados_t cluster, const char *pgstr, const char **cmd, size_t cmdlen, const char *inbuf, size_t inbuflen, char **outbuf, size_t *outbuflen, char **outs, size_t *outslen); CEPH_RADOS_API int rados_mgr_command(rados_t cluster, const char **cmd, size_t cmdlen, const char *inbuf, size_t inbuflen, char **outbuf, size_t *outbuflen, char **outs, size_t *outslen); /* * This is not a doxygen comment leadin, because doxygen breaks on * a typedef with function params and returns, and I can't figure out * how to fix it. * * Monitor cluster log * * Monitor events logged to the cluster log. The callback get each * log entry both as a single formatted line and with each field in a * separate arg. * * Calling with a cb argument of NULL will deregister any previously * registered callback. * * @param cluster cluster handle * @param level minimum log level (debug, info, warn|warning, err|error) * @param cb callback to run for each log message. It MUST NOT block * nor call back into librados. * @param arg void argument to pass to cb * * @returns 0 on success, negative code on error */ typedef void (*rados_log_callback_t)(void *arg, const char *line, const char *who, uint64_t sec, uint64_t nsec, uint64_t seq, const char *level, const char *msg); /* * This is not a doxygen comment leadin, because doxygen breaks on * a typedef with function params and returns, and I can't figure out * how to fix it. * * Monitor cluster log * * Monitor events logged to the cluster log. The callback get each * log entry both as a single formatted line and with each field in a * separate arg. * * Calling with a cb argument of NULL will deregister any previously * registered callback. * * @param cluster cluster handle * @param level minimum log level (debug, info, warn|warning, err|error) * @param cb callback to run for each log message. It MUST NOT block * nor call back into librados. * @param arg void argument to pass to cb * * @returns 0 on success, negative code on error */ typedef void (*rados_log_callback2_t)(void *arg, const char *line, const char *channel, const char *who, const char *name, uint64_t sec, uint64_t nsec, uint64_t seq, const char *level, const char *msg); CEPH_RADOS_API int rados_monitor_log(rados_t cluster, const char *level, rados_log_callback_t cb, void *arg); CEPH_RADOS_API int rados_monitor_log2(rados_t cluster, const char *level, rados_log_callback2_t cb, void *arg); /** * register daemon instance for a service * * Register us as a daemon providing a particular service. We identify * the service (e.g., 'rgw') and our instance name (e.g., 'rgw.$hostname'). * The metadata is a map of keys and values with arbitrary static metdata * for this instance. The encoding is a series of NULL-terminated strings, * alternating key names and values, terminating with an empty key name. * For example, "foo\0bar\0this\0that\0\0" is the dict {foo=bar,this=that}. * * For the lifetime of the librados instance, regular beacons will be sent * to the cluster to maintain our registration in the service map. * * @param cluster handle * @param service service name * @param daemon daemon instance name * @param metadata_dict static daemon metadata dict */ CEPH_RADOS_API int rados_service_register( rados_t cluster, const char *service, const char *daemon, const char *metadata_dict); /** * update daemon status * * Update our mutable status information in the service map. * * The status dict is encoded the same way the daemon metadata is encoded * for rados_service_register. For example, "foo\0bar\0this\0that\0\0" is * {foo=bar,this=that}. * * @param cluster rados cluster handle * @param status_dict status dict */ CEPH_RADOS_API int rados_service_update_status( rados_t cluster, const char *status_dict); /** @} Mon/OSD/PG commands */ /* * These methods are no longer supported and return -ENOTSUP where possible. */ CEPH_RADOS_API int rados_objects_list_open( rados_ioctx_t io, rados_list_ctx_t *ctx) __attribute__((deprecated)); CEPH_RADOS_API uint32_t rados_objects_list_get_pg_hash_position( rados_list_ctx_t ctx) __attribute__((deprecated)); CEPH_RADOS_API uint32_t rados_objects_list_seek( rados_list_ctx_t ctx, uint32_t pos) __attribute__((deprecated)); CEPH_RADOS_API int rados_objects_list_next( rados_list_ctx_t ctx, const char **entry, const char **key) __attribute__((deprecated)); CEPH_RADOS_API void rados_objects_list_close( rados_list_ctx_t ctx) __attribute__((deprecated)); #ifdef __cplusplus } #endif #endif