summaryrefslogtreecommitdiffstats
path: root/OS/Makefile-Default
diff options
context:
space:
mode:
Diffstat (limited to 'OS/Makefile-Default')
-rw-r--r--OS/Makefile-Default327
1 files changed, 327 insertions, 0 deletions
diff --git a/OS/Makefile-Default b/OS/Makefile-Default
new file mode 100644
index 0000000..41a4dbb
--- /dev/null
+++ b/OS/Makefile-Default
@@ -0,0 +1,327 @@
+##################################################
+# The Exim mail transport agent #
+##################################################
+
+# Generic default make file containing settings that relate to the OS or
+# to selectable features within the OS. The configuration options for Exim
+# itself live in Local/Makefile, which is constructed by editing src/EDITME.
+
+# These settings are basic defaults which may be overridden, either by the
+# generic OS-specific files, or by site-specific files. Do not edit this file.
+# Instead, edit or create suitable OS-specific and/or site specific files.
+# See the manual for details.
+
+
+# MAKE_SHELL contains the name of the shell to be used for executing commands
+# from the make files. Normally /bin/sh should be used.
+
+MAKE_SHELL=/bin/sh
+
+
+# BASENAME_COMMAND contains the path to the "basename" command, which varies
+# from OS to OS. This is used when building the Exim monitor script only. (See
+# also HOSTNAME_COMMAND.) If BASENAME_COMMAND is set to "look_for_it" then the
+# script checks for /usr/bin/basename and /bin/basename, and if neither is
+# found, it uses /usr/ucb/basename. This copes with Solaris 2 and Linux, both
+# of which come in different versions.
+
+BASENAME_COMMAND=/usr/bin/basename
+
+
+# If you set STRIP_COMMAND to the path of the "strip" command, it will be run
+# on every binary that is built. It is left unset by default, which leaves
+# the binaries unstripped.
+
+# STRIP_COMMAND=/usr/bin/strip
+
+
+# Some of the following commands live in different places in different OS. We
+# include them all here for generality.
+
+CHOWN_COMMAND=/usr/bin/chown
+CHGRP_COMMAND=/usr/bin/chgrp
+CHMOD_COMMAND=/usr/bin/chmod
+MV_COMMAND=/bin/mv
+RM_COMMAND=/bin/rm
+TOUCH_COMMAND=/usr/bin/touch
+
+
+# Some operating systems have different ways of building libraries of
+# functions. This macro defines the command to do this, defaulting to
+# the "ar" command with options "cq".
+
+AR=ar cq
+
+
+# Not all operating systems have the iconv() function. Those that do have
+#
+# HAVE_ICONV=yes
+#
+# in their OS-specific Makefiles. On those that don't it is possible to
+# install an independent implementation of iconv(). If you've done this,
+# add "HAVE_ICONV=yes" to your Local/Makefile.
+
+
+# Perl is not necessary for running Exim itself, except when EXIM_PERL
+# is set to cause Perl embedding. However, some Perl utilities are provided
+# for processing the logs. Perl 5 is assumed.
+
+PERL_COMMAND=/usr/bin/perl
+
+
+# CC contains the name of the C compiler to be used.
+
+CC=gcc
+
+
+# CFLAGS contains flags to be passed to the compiler. Nothing is defaulted
+# here; instead each OS-dependent Makefile contains a default setting.
+
+# CFLAGS=-O
+
+
+# LFLAGS contains flags to be passed to the link editor. Nothing is defaulted
+# here; instead each OS-dependent Makefile contains a default setting if one
+# is needed.
+
+# LFLAGS=
+
+
+# PCRE_LIBS contains the library to be linked for PCRE
+
+PCRE_LIBS=-lpcre
+
+
+# LIBS and EXTRALIBS contain library settings that are used on linking
+# commands to build binaries. The OS-dependent Makefile may contain a default
+# setting for LIBS, leaving EXTRALIBS available for adding further libraries
+# that are required for optional extras.
+
+# LIBS=
+# EXTRALIBS=
+
+
+# LIBS_EXIM and EXTRALIBS_EXIM contain library settings that are used
+# only when linking the Exim binary. They are not used for other binaries.
+# One possible use is for the TCP wrappers library.
+
+# LIBS_EXIM=
+# EXTRALIBS_EXIM=
+
+
+# LIBS_EXIMON and EXTRALIBS_EXIMON contain library settings that are
+# used only when linking the Exim monitor binary. They are not used for
+# other binaries.
+
+# LIBS_EXIMON=
+# EXTRALIBS_EXIMON=
+
+
+# The error name for quota exceeded varies among operating systems, and
+# even, unfortunately, in different versions of the same operating system.
+# EDQUOT was not in Sys V, but is in SPEC 1170, apparently. It was used
+# in SunOS4, but got taken out for SunOS5, where ENOSPC was given if a quota
+# was exceeded. However, it got put back into SunOS5 with a patch to 5.4 in
+# order to comply with SPEC 1170. Thus even different patch levels of the same
+# system (SunOS5) may use different numbers.
+#
+# If you don't have quotas or are not interested in handling quota errors
+# specially, just set this variable to 0. If it is not set, it defaults to
+# EDQUOT if that is defined for the OS; otherwise it defaults to ENOSPC.
+
+# ERRNO_QUOTA=EDQUOT
+
+
+# The exiwhat utility script finds all the processes running Exim, and sends
+# them a SIGUSR1 signal to get them to write their status to a file. There are
+# two ways in which this can be done:
+#
+# (1) If the OS has a command to find processes and signal them, that can be
+# used. Linux has "killall"; Solaris has "pkill". (Note: "killall" on Solaris
+# does something very different - and disastrous.) The following are set in the
+# OS-specific Makefiles for those OS where this can be done:
+
+# EXIWHAT_MULTIKILL_CMD=
+# EXIWHAT_MULTIKILL_ARG=
+
+# (2) For other operating systems, exiwhat calls the ps command and egreps the
+# output in order to find all the processes running Exim. The arguments for the
+# various commands needed to do this vary from OS to OS. These defaults work on
+# Solaris 2, HPUX, and IRIX. The OS-specific Makefiles have different versions
+# for other systems, and you can override with your own requirements in your
+# private Makefiles in the Local directory. The most commonly found
+# alternatives are -ax instead of -e for the ps argument, and / instead of a
+# blank before the name exim for the egrep argument on systems whose ps output
+# shows the full path name. The quotes for the egrep argument are specified
+# here so that leading white space can be used. This value should always be
+# given in single quotes.
+
+EXIWHAT_PS_CMD=/bin/ps
+EXIWHAT_PS_ARG=-e
+EXIWHAT_EGREP_ARG=' exim( |$$|-)'
+
+# For both kinds of exiwhat usage, the next setting specifies the signal that
+# is sent.
+
+EXIWHAT_KILL_SIGNAL=-USR1
+
+
+# IPv6 is gradually spreading more and more widely. Most operating systems seem
+# to support it nowadays. If you set this option, IPv6 support will be included
+# in the Exim binary. As well as the basic enabling option, there are
+# parameters for include and library directories that may be needed for IPv6 on
+# some systems, where the support is not yet in the standard library.
+
+# HAVE_IPV6=YES
+# IPV6_INCLUDE=-I /usr/ipv6/include
+# IPV6_LIBS=-L/usr/ipv6/libs -linet6
+
+# Exim uses the function getaddrinfo() for converting IPv6 addresses in text
+# form to binary. Apparently some operating systems do not support this, or not
+# correctly, and require the use of the function inet_pton() instead. The
+# following setting enables this. Note, however, the inet_pton() has reduced
+# functionality compared with getaddrinfo(). In particular, it does not
+# recognize the percent convention for identifying scopes (interfaces) that is
+# used by some operating systems.
+
+# IPV6_USE_INET_PTON=yes
+
+# HOSTNAME_COMMAND contains the path to the "hostname" command, which varies
+# from OS to OS. This is used when building the Exim monitor script only. (See
+# also BASENAME_COMMAND.) If HOSTNAME_COMMAND is set to "look_for_it" then the
+# script checks for /usr/bin/hostname and /bin/hostname, and if neither is
+# found, it uses /usr/ucb/basename. This copes with Solaris 2, which comes in
+# different versions.
+
+HOSTNAME_COMMAND=/bin/hostname
+
+
+# INCLUDE contains arbitrary include parameters that you may need to use
+# when building exim. It is added to every compile command.
+
+# INCLUDE=-I /some/special/include-directory
+
+
+# Some OS require a separate library to be quoted when linking programs that
+# call name resolver functions. This can be set in LIBRESOLV, which is left
+# unset here, but is set is some of the OS-specific Makefiles.
+
+# LIBRESOLV=
+
+
+# Additional libraries and include directories may be required for some
+# lookup styles, e.g. LDAP or SQL. LOOKUP_LIBS is included only on the
+# command for linking Exim itself, not on any auxiliary programs. You
+# don't need to set LOOKUP_INCLUDE if the relevant directories are already
+# specified in INCLUDE.
+
+# LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/sql/include
+# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber
+
+
+# RANLIB should be set to something that does nothing on systems that do not
+# have the ranlib command or do not need to run it on library files.
+
+RANLIB=ranlib
+
+
+# EXIM_CHMOD is available to specify a command that is automatically applied
+# to the Exim binary immediately it is compiled. (I find this useful when
+# building test versions.)
+
+EXIM_CHMOD=@true
+
+
+# If you want to use local_scan() at all, the support code must be included
+# by uncommenting this line.
+
+# HAVE_LOCAL_SCAN=yes
+
+# LOCAL_SCAN_SOURCE defines the file in which the function local_scan() is
+# defined. This provides the administrator with a hook for including C code
+# for scanning incoming mails. The path that is defined must be relative to
+# the Exim distribution directory. For example
+
+# LOCAL_SCAN_SOURCE=Local/local_scan.c
+
+# A very simple example points to a template function that doesn't actually do
+# any scanning, but just accepts the message. A compilable file must be
+# included in the build even if HAVE_LOCAL_SCAN is not defined.
+
+LOCAL_SCAN_SOURCE=src/local_scan.c
+
+# If you want to specify options for your local_scan() that can be set from
+# the main Exim configuration file, you need to uncomment the following line,
+# and then provide a table of options in your local_scan() source, as described
+# in the reference manual.
+
+# LOCAL_SCAN_HAS_OPTIONS=yes
+
+
+#############################################################################
+# The following are all concerned with configuring the way Exim handles its
+# database (hints) and other dbm files.
+
+# Some systems require a separate library to be supplied when linking programs
+# that make use of DBM library calls. This can be set in DBMLIB, which is unset
+# by default, but is set in some of the OS-specific Makefiles. Setting it in
+# your Local/Makefile will override any other setting.
+
+# DBMLIB=
+
+
+# When Exim is attempting to lock one of its database (hints) files, it
+# applies a timeout which can be altered here.
+
+# EXIMDB_LOCK_TIMEOUT=60
+
+
+# By default, Exim uses traditional ndbm function calls to handle its indexed
+# hints databases. On systems that have Berkeley db installed, this still
+# works via the compatibility interface. However, by defining USE_DB you can
+# make it use native db function calls.
+
+# USE_DB=YES
+
+# Similarly, if you are using gdbm, Exim will by default use the ndbm
+# compatibility interface. However, by defining USE_GDBM you can make it
+# use the native gdbm function calls.
+
+# USE_GDBM=YES
+
+
+#############################################################################
+# The following definitions are relevant only when compiling the Exim monitor
+# program, which requires an X11 display. See the variable EXIM_MONITOR in
+# src/EDITME for how to suppress this compilation.
+
+# X11 contains the location of the X11 libraries and include files.
+
+X11=/usr/X11R6
+
+# XINCLUDE contains options for header inclusion when compiling functions
+# that call X11 functions.
+
+XINCLUDE=-I$(X11)/include
+
+# XLFLAGS contains flags to be passed to the linker when linking the monitor.
+
+XLFLAGS=-L$(X11)/lib
+
+# X11_LD_LIB contains the name of the X11 library that is to be added to
+# LD_LIBRARY_PATH when running the monitor program.
+
+X11_LD_LIB=$(X11)/lib
+
+# A modified version of the Athena TextPop module is supplied with Exim. The
+# modification is to remove the "replace" part of the "search and replace"
+# operation because it isn't wanted. TextPop is only one of a number of
+# modules that make up the Text widget. Some antique link editors cannot handle
+# the case of a replacement module for one of a set of modules. To allow
+# the monitor to be linked in such cases, set the value of EXIMON_TEXTPOP
+# to be empty. The search operations will then contain a useless "replace"
+# option, which is untidy, but does no harm.
+
+EXIMON_TEXTPOP=em_TextPop.o
+
+# End