summaryrefslogtreecommitdiffstats
path: root/doc/OptionLists.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--doc/OptionLists.txt1081
1 files changed, 1081 insertions, 0 deletions
diff --git a/doc/OptionLists.txt b/doc/OptionLists.txt
new file mode 100644
index 0000000..99e8706
--- /dev/null
+++ b/doc/OptionLists.txt
@@ -0,0 +1,1081 @@
+LISTS OF EXIM OPTIONS
+---------------------
+
+This file contains complete lists of four kinds of Exim option:
+
+ 1. Those that can appear in the run time configuration file;
+ 2. Those that can be used on the command line;
+ 3. Those that can appear in the build time configuration (Local/Makefile);
+ 4. Those that can appear in the build time configuration for the Exim monitor
+ (Local/eximon.conf).
+
+This file was last updated for Exim release 4.72.
+
+
+1. RUN TIME OPTIONS
+-------------------
+
+As Exim has developed, new options have been added at each major release. For
+the most part, backwards compatibility has been maintained, and obsolete
+options continue to be recognized. However, incompatible changes took place at
+releases 3.00, and 4.00. In both cases, several groups of options were
+amalgamated into new, extended options, and obsolete options were removed.
+
+The table below contains a complete list of all Exim's current options, along
+with their types, default values, and where they can be used. String options
+that are expanded before use are marked with *. Host lists, domain lists, and
+address lists are always expanded. In some cases the defaults are not fixed
+values, or not short enough to fit in the table. These are indicated by +. Some
+other default values are determined when the Exim binary is compiled; these are
+indicated by ++.
+
+For options that are specific to a particular driver, the fourth column
+contains the driver name, for example, appendfile. Otherwise, it contains
+
+ . `main' for options that appear in the main section of Exim's configuration
+ file;
+
+ . `authenticators' for generic options that apply to any authenticator;
+
+ . `routers' for generic options that apply to any router;
+
+ . `transports' for generic options that apply to any transport.
+
+The fifth column contains the version of Exim in which the option was added, or
+substantially changed. Where no number is given, the option has been in Exim
+since the very early releases. The routers were completely reorganised for
+release 4.00, and so no router options are shown as earlier than 4.00, though
+in fact some of them were inherited from earlier versions.
+
+-----------------------------------------------------------------------------------------
+accept_8bitmime boolean true main 1.60 changed to true in 4.80
+acl_not_smtp string* unset main 4.11
+acl_not_smtp_mime string* unset main 4.51 with content scan
+acl_smtp_auth string* unset main 4.00
+acl_smtp_connect string* unset main 4.11
+acl_smtp_data string* unset main 4.00
+acl_smtp_data_prdr string* unset main 4.82 with experimental_prdr, 4.83 unless disable_prdr
+acl_smtp_dkim string* unset main 4.70 unless disable_dkim
+acl_smtp_etrn string* unset main 4.00
+acl_smtp_expn string* unset main 4.00
+acl_smtp_helo string* unset main 4.20
+acl_smtp_mail string* unset main 4.11
+acl_smtp_mailauth string* unset main 4.21
+acl_smtp_mime string* unset main 4.50 with content scan
+acl_smtp_predata string* unset main 4.43
+acl_smtp_quit string* unset main 4.43
+acl_smtp_rcpt string* unset main 4.00
+acl_smtp_starttls string* unset main 4.11
+acl_smtp_vrfy string* unset main 4.00
+address_data string* unset routers 4.00
+address_retry_include_sender boolean true smtp 4.64
+address_test boolean true routers 4.14
+admin_groups string list unset main 3.02
+allow_domain_literals boolean false main 4.00 replacing forbid_domain_literals
+allow_commands string list* unset pipe 1.89
+allow_defer boolean false redirect 4.00
+allow_fail boolean false redirect 4.00
+allow_filter boolean false redirect 4.00
+allow_freeze boolean false redirect 4.00
+allow_fifo boolean false appendfile 3.13
+allow_localhost boolean false smtp 1.73
+allow_mx_to_ip boolean false main 3.14
+allow_symlink boolean false appendfile
+allow_utf8_domains boolean false main 4.14
+arc_sign string* unset smtp 4.91 with Experimental_ARC
+auth_advertise_hosts host list "*" main 4.00
+authenticated_sender string* unset smtp 4.14
+authenticated_sender_force boolean false smtp 4.61
+authenticate_hosts host list unset smtp 3.13
+auto_thaw time 0s main
+av_scanner string* + main 4.50 with content scan
+batch_id string unset appendfile 4.00
+ unset lmtp 4.00
+ unset pipe 4.00
+batch_max integer 100 appendfile
+ 100 lmtp 3.20
+ 100 pipe
+bcc string* unset autoreply
+bi_command string unset main
+body_only boolean false transports 2.05
+bounce_message_file string* unset main 4.00 expanded from 4.94
+bounce_message_text string unset main 4.00
+bounce_return_body boolean true main 4.23
+bounce_return_message boolean true main 4.00
+bounce_return_size_limit int 100K main 4.23 better name for return_size_limit
+bounce_sender_authentication string unset main 4.00
+callout_domain_negative_expire time 3h main 4.11
+callout_domain_positive_expire time 7d main 4.11
+callout_negative_expire time 2h main 4.11
+callout_positive_expire time 24h main 4.11
+callout_random_local_part string* + main 4.11
+cannot_route_message string* unset routers 4.11
+caseful_local_part boolean false routers 4.00
+cc string* unset autoreply
+check_ancestor boolean false redirect 4.00
+check_group boolean false appendfile
+ + redirect 4.00
+check_local_user boolean false routers 4.00
+check_log_inodes integer 0 main
+check_log_space integer 0 main
+check_owner boolean true appendfile 3.14
+ + redirect 4.00
+check_rfc2047_length boolean true main 4.60
+check_secondary_mx boolean false dnslookup 4.00
+check_spool_inodes integer 0 main
+check_spool_space integer 0 main
+check_string string "From " appendfile 3.03
+ unset pipe 3.03
+check_srv string* unset dnslookup 4.31
+client_authz string* unset gsasl 4.94
+client_condition string* unset authenticators 4.68
+client_ignore_invalid_base64 boolean false plaintext 4.61
+client_name string* + cram_md5 3.10
+client_password string* unset gsasl 4.94
+client_secret string* unset cram_md5 3.10
+client_send string* unset plaintext 3.10
+ unset external (auth) 4.93
+client_username string* unset gsasl 4.94
+command string* unset lmtp 3.20
+ unset pipe
+ unset queryprogram 4.00
+command_group string unset queryprogram 4.00
+command_timeout time 5m smtp
+command_user string unset queryprogram 4.00
+commandline_checks_require_admin boolean false main 4.90
+condition string* unset routers 4.00
+connect_timeout time 0s smtp 1.60
+connection_max_messages integer 500 smtp 4.00 replaces batch_max
+create_directory boolean true appendfile
+create_file string "anywhere" appendfile
+current_directory string unset transports 4.00
+ unset queryprogram 4.00
+daemon_smtp_ports string unset main 1.75 pluralised in 4.21
+daemon_startup_retries int 9 main 4.52
+daemon_startup_sleep time 30s main 4.52
+dane_require_tls_ciphers string* unset smtp 4.91
+data string unset redirect 4.00
+data_timeout time 5m smtp
+debug_print string* unset authenticators 4.00
+ unset routers 4.00
+ unset transports 2.00
+debug_store boolean false main 4.90
+delay_after_cutoff boolean true smtp
+delay_warning time list 24h main
+delay_warning_condition string* + main 1.73
+deliver_drop_privilege boolean false main 4.00
+deliver_queue_load_max fixed-point unset main 1.70
+delivery_date_add boolean false transports
+delivery_date_remove boolean true main
+dkim_canon string* unset smtp 4.70
+dkim_domain string list* unset smtp 4.72
+dkim_private_key string* unset smtp 4.70
+dkim_selector string* unset smtp 4.70
+dkim_sign_headers string* (RFC4871) smtp 4.70
+dkim_strict string* unset smtp 4.70
+dkim_timestamps integer* unset smtp 4.92
+dkim_verify_hashes string sha256:sha512:sha1 main 4.93
+dkim_verify_keytypes string ed25519:rsa main 4.93
+dkim_verify_min_keysizes string list "rsa=1024 ed25519=250" main 4.94
+dkim_verify_minimal boolean false main 4.93
+dkim_verify_signers string* $dkim_signers main 4.70
+directory string* unset appendfile
+directory_file string* + appendfile
+directory_mode octal-integer 0700 appendfile
+directory_transport string* unset redirect 4.00
+disable_ipv6 boolean false main 4.61
+disable_logging boolean false routers 4.11
+ false transports 4.11
+dmarc_forensic_sender string unset main 4.82 if experimental_dmarc, 4.93 mainline
+dmarc_history_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
+dmarc_tld_file string unset main 4.82 if experimental_dmarc, 4.93 mainline
+dns_again_means_nonexist domain list unset main 1.89
+dns_check_names_pattern string + main 2.11
+dns_cname_loops integer 0 main 4.92 Set to 9 for older behaviour
+dns_csa_search_limit integer 5 main 4.60
+dns_csa_use_reverse boolean true main 4.60
+dns_dnssec_ok integer -1 main 4.82
+dns_dane_ok integer -1 main 4.83
+dns_ipv4_lookup boolean false main 3.20
+dns_qualify_single boolean true smtp
+dns_retrans time 0s main 1.60
+dns_retry integer 0 main 1.60
+dns_search_parents boolean false smtp
+dns_use_edns0 integer -1 main 4.76
+domains domain list unset routers 4.00
+driver string unset authenticators
+ unset routers 4.00
+ unset transports
+drop_cr boolean false main 4.00 became a no-op in 4.21
+dscp string unset smtp 4.82
+dsn_from string* + main 4.67
+envelope_to_add boolean false transports
+envelope_to_remove boolean true main
+environment string* unset pipe 2.95
+errors_copy string list* unset main
+errors_reply_to string unset main
+errors_to string* unset routers 4.00
+escape_string string ">From " appendfile 3.03
+ unset pipe 3.03
+exim_group string ++ main
+exim_path string ++ main
+exim_user string ++ main
+exim_version string ++ main 4.93
+expn boolean true routers
+extra_local_interfaces string unset main 4.21
+extract_addresses_remove_arguments boolean true main 1.92
+fail_verify boolean false routers
+fail_verify_recipient boolean false routers 4.00
+fail_verify_sender boolean false routers 4.00
+fallback_hosts string list unset routers 4.00
+ unset smtp
+file string* unset appendfile
+ unset autoreply
+ unset redirect 4.00
+file_expand boolean false autoreply
+file_format string unset appendfile 3.03
+file_must_exist boolean false appendfile
+file_optional boolean false autoreply
+file_transport string* unset redirect 4.00
+filter_prepend_home boolean true redirect 4.63
+final_timeout time 10m smtp
+finduser_retries integer 0 main
+forbid_blackhole boolean false redirect 4.00
+forbid_exim_filter boolean false redirect 4.44
+forbid_fail boolean false redirect 4.00
+forbid_file boolean false redirect 4.00
+forbid_filter_existstest boolean false redirect 4.00
+forbid_filter_logwrite boolean false redirect 4.00
+forbid_filter_lookup boolean false redirect 4.00
+forbid_filter_perl boolean false redirect 4.00
+forbid_filter_readfile boolean false redirect 4.00
+forbid_filter_readsocket boolean false redirect 4.11
+forbid_filter_reply boolean false redirect 4.00
+forbid_filter_run boolean false redirect 4.00
+forbid_include boolean false redirect 4.00
+forbid_pipe boolean false redirect 4.00
+forbid_sieve_filter boolean false redirect 4.44
+forbid_smtp_code boolean false redirect 4.63
+force_command boolean false pipe 4.82
+freeze_exec_fail boolean false pipe 1.89
+freeze_signal boolean false pipe 4.75
+freeze_tell boolean false main 4.00 replaces freeze_tell_mailmaster
+from string* unset autoreply
+gecos_name string* unset main
+gecos_pattern string unset main
+gethostbyname boolean false smtp
+gnutls_allow_auto_pkcs11 boolean false main 4.82
+gnutls_compat_mode boolean unset main 4.70
+gnutls_require_kx string* unset main 4.67 deprecated, warns
+ string* unset smtp 4.67 deprecated, warns
+gnutls_require_mac string* unset main 4.67 deprecated, warns
+ string* unset smtp 4.67 deprecated, warns
+gnutls_require_protocols string* unset main 4.67 deprecated, warns
+ string* unset smtp 4.67 deprecated, warns
+group string + routers 4.00
+ unset transports 4.00 replaces local option in some transports
+header_line_maxsize integer 0 (unset) main 4.14
+header_maxsize integer 1M main 4.14
+headers string* unset autoreply
+headers_add string* unset routers 4.00
+ unset transports
+headers_charset string ++ main 4.21
+headers_only boolean false transports 2.05
+headers_remove string* unset routers 4.00
+ unset transports
+headers_rewrite string unset transports 3.20
+helo_accept_junk_hosts host list unset main 3.00
+helo_allow_chars string "" main 4.02
+helo_lookup_domains domain list unset main 4.00
+helo_data string* "$primary_hostname" smtp 3.21
+helo_try_verify_hosts host list unset main 4.00
+helo_verify_hosts host list unset main 1.73
+hide_child_in_errmsg false redirect 4.00
+hold_domains domain list unset main 1.70
+home_directory string* unset transports 4.00 replaces individual options
+host_all_ignored string "defer" manualroute 4.67
+host_find_failed string "freeze" manualroute 4.00
+host_lookup host list unset main 3.00
+host_lookup_order string list "bydns:byaddr" main 4.30
+host_reject_connection host list unset main 4.00
+hosts string unset iplookup 4.00
+ string list* unset smtp
+hosts_avoid_esmtp host list unset smtp 4.21
+hosts_avoid_pipelining host list unset smtp 4.67
+hosts_avoid_tls host list unset smtp 3.20
+hosts_connection_nolog host list unset main 4.43
+hosts_max_try integer 5 smtp 3.20
+hosts_max_try_hardlimit integer 50 smtp 4.50
+hosts_nopass_tls host list unset smtp 4.00
+hosts_noproxy_tls host list "*" smtp 4.90
+hosts_override boolean false smtp 2.11
+hosts_pipe_connect host_list unset smtp 4.93 if experimental_pipe_connect
+hosts_randomize boolean false manualroute 4.00
+ false smtp 3.14
+hosts_require_auth host list unset smtp 4.00
+hosts_require_dane host list unset smtp 4.91 (4.85 experimental)
+hosts_require_ocsp host list unset smtp 4.82 if experimental_ocsp
+hosts_require_tls host list unset smtp 3.20
+hosts_treat_as_local domain list unset main 1.95
+hosts_try_auth host list unset smtp 4.00
+hosts_try_dane host list unset smtp 4.91 (4.85 experimental)
+hosts_try_fastopen host list unset smtp 4.88
+hosts_try_prdr host list unset smtp 4.82 if experimental_prdr
+ibase_servers string unset main 4.23
+ignore_bounce_errors_after time 0s main 4.00
+ignore_eacces boolean false redirect 4.00
+ignore_enotdir boolean false redirect 4.00
+ignore_fromline_hosts host list unset main
+ignore_fromline_local boolean false main 2.05
+ignore_status boolean false pipe
+ignore_target_hosts host list unset routers 4.00
+include_directory string unset redirect 4.00
+initgroups false routers 4.00
+interface string list unset smtp 1.70
+keep_malformed time 4d main
+keepalive boolean true smtp 2.05
+ldap_default_servers string list unset main 3.02
+ldap_version int 2 or 3 main 4.14
+local_from_check boolean true main 3.14
+local_from_prefix string unset main 3.14
+local_from_suffix string unset main 3.14
+local_interfaces string list unset main 1.60
+local_part_prefix string unset routers 4.00 replaces prefix
+local_part_prefix_optional boolean unset routers 4.00 replaces prefix_optional
+local_part_suffix string unset routers 4.00 replaces suffix
+local_part_suffix_optional boolean unset routers 4.00 replaces suffix_optional
+local_parts string list* unset routers 4.00
+local_scan_timeout time 5m main 4.03
+local_sender_retain boolean false main 4.00
+localhost_number string unset main
+lock_fcntl_timeout time 0s appendfile 3.14
+lock_flock_timeout time 0s appendfile 4.11
+lock_interval time 3s appendfile
+lock_retries integer 10 appendfile
+lockfile_mode octal-integer 0600 appendfile
+lockfile_timeout time 30m appendfile
+log string* unset autoreply
+log_as_local boolean + routers 4.00
+log_file_path string list ++ main
+log_defer_output boolean false pipe 1.89
+log_fail_output boolean false pipe 1.60
+log_output boolean false pipe 1.60
+log_selector string unset main 4.00
+log_timezone boolean false main 4.11
+lookup_open_max integer 25 main 2.05
+mailbox_filecount string* unset appendfile 4.43
+mailbox_size string* unset appendfile 4.43
+maildir_format boolean false appendfile 1.70
+maildir_retries integer 10 appendfile 1.70
+maildir_tag string* unset appendfile 1.92
+maildir_use_size_file boolean* false appendfile 4.30 expanded in 4.77
+maildirfolder_create_regex string unset appendfile 4.62
+mailstore_format boolean false appendfile 2.00
+mailstore_prefix string* unset appendfile 2.00
+mailstore_suffix string* unset appendfile 2.00
+match_directory string* unset localuser
+max_output integer 20K pipe
+max_rcpt integer 100 smtp 1.60
+max_user_name_length integer 0 main
+mbx_format boolean false appendfile 2.10
+message_body_newlines boolean false main 4.68
+message_body_visible integer 500 main
+message_id_header_domain string* unset main 4.11
+message_id_header_text string* unset main
+message_logs boolean true main 4.10
+message_prefix string* + appendfile 4.00 replaces prefix
+ string* unset pipe 4.00 replaces prefix
+message_size_limit integer 50M main
+ 0 transports 2.05
+message_suffix string* + appendfile 4.00 replaces suffix
+ string* unset pipe 4.00 replaces suffix
+mode octal-integer 0600 appendfile
+ 0600 autoreply
+mode_fail_narrower boolean true appendfile 1.70
+modemask octal-integer 022 redirect 4.00
+more boolean true routers 4.00
+move_frozen_messages boolean false main 3.09
+multi_domain boolean true smtp
+mx_domains domain list unset dnslookup 4.00
+mx_fail_domains domain list unset dnslookup 4.43
+mysql_servers string list unset main 3.03
+never_users string list unset main
+notifier_socket string "$spool_directory/exim_daemon_notify"
+ main 4.94
+notify_comsat boolean false appendfile
+once string* unset autoreply
+once_file_size integer 0 autoreply 3.20
+once_repeat time 0s autoreply 2.95
+one_time boolean false redirect 4.00
+openssl_options string +no_sslv2 main 4.73 default changed in 4.80
+optional boolean false iplookup 4.00
+oracle_servers string unset main 4.00
+owners string list unset redirect 4.00
+owngroups string list unset redirect 4.00
+pass_on_timeout boolean false routers 4.00
+pass_router string unset routers 4.00
+path string "/usr/bin" pipe
+percent_hack_domains domain list unset main
+perl_at_start boolean false main 2.10
+perl_startup string unset main 2.10
+permit_coredump boolean false pipe 4.73
+pgsql_servers string list unset main 3.14
+pid_file_path string ++ main
+pipe_as_creator boolean false pipe
+pipe_transport string* unset redirect 4.00
+pipelining_advertise_hosts host list "*" main 4.14
+pipelining__connect_advertise_hosts host list "*" main 4.92 if experimental_pipe_connect
+port integer 0 iplookup 4.00
+ string "smtp" smtp
+preserve_message_logs boolean false main
+prdr_enable boolean false main 4.82 if experimental_prdr
+primary_hostname string + main
+print_topbitchars boolean false main 1.89
+process_log_path string unset main 4.21
+prod_requires_admin boolean true main 1.70
+protocol string "udp" iplookup 4.00
+ string "smtp" smtp 3.20
+public_name string unset authenticators 3.10
+qualify_domain string + main
+ string* unset redirect 4.31
+qualify_preserve_domain boolean false redirect 4.00
+qualify_recipient string + main
+qualify_single boolean true dnslookup 4.00
+query string* + iplookup 4.00
+queue_domains domain list unset main 4.00
+queue_list_requires_admin boolean true main 1.95
+queue_only boolean false main
+queue_only_file string unset main 2.05
+queue_only_load fixed-point unset main
+queue_only_load_latch boolean true main 4.68
+queue_only_override boolean true main 4.21
+queue_run_in_order boolean false main 1.70
+queue_run_max integer 5 main
+queue_smtp_domains domain list unset main
+quota string* unset appendfile 1.60
+quota_directory string* unset appendfile 4.11
+quota_filecount integer 0 appendfile 2.05
+quota_is_inclusive boolean true appendfile 3.20
+quota_size_regex string unset appendfile 3.14
+quota_warn_message string* + appendfile 2.10
+quota_warn_threshold string* 0 appendfile 2.10
+rcpt_include_affixes boolean false transports 4.21
+receive_timeout time 0s main 4.00 replacing accept_timeout
+received_header_text string* + main
+received_headers_max integer 30 main
+recipient_unqualified_hosts host list unset main 4.00 replacing receiver_unqualified_hosts
+recipients_max integer 50000 main 1.60 default changed in 4.95 (was 0)
+recipients_max_reject boolean false main 1.70
+redirect_router string unset routers 4.00
+remote_max_parallel integer 1 main
+remote_sort_domains domain list unset main 4.00 replacing remote_sort
+repeat_use boolean true redirect 4.00
+reply_to string* unset autoreply 2.05
+reply_transport string* unset redirect 4.00
+require_files string list* unset routers 4.00
+reroute string* unset iplookup 4.00
+response_pattern string unset iplookup 4.00
+restrict_to_path boolean false pipe
+retry_data_expire time 7d main 3.03
+retry_include_ip_address boolean true smtp 1.92
+retry_interval_max time 24h main
+retry_use_local_part boolean + routers 4.00
+ + transports 4.00 replacing individual options
+return_fail_output boolean false pipe 1.60
+return_message boolean false autoreply
+return_output boolean false pipe
+return_path string* unset transports 2.05
+return_path_add boolean false transports
+return_path_remove boolean true main
+return_size_limit integer 100K main renamed bounce_return_size_limit in 4.23
+rewrite boolean true redirect 4.00
+rewrite_headers boolean true dnslookup 4.00
+rfc1413_hosts host list * main
+rfc1413_query_timeout time 5s main
+router_home_directory string* unset routers 4.11
+route_data string* unset manualroute 4.00
+route_list string list unset manualroute 4.00
+same_domain_copy_routing boolean false dnslookup 4.00
+search_parents boolean false dnslookup 4.00
+self string "freeze" routers 4.00
+sender_unqualified_hosts host list unset main
+senders address list unset routers 4.00
+serialize_hosts host list unset smtp 1.60
+server_advertise_condition string* unset authenticators 4.14
+server_channelbinding bool false gsasl 4.80
+server_condition string* unset authenticators 3.10 (plaintext) 4.64 (others)
+server_hostname string* "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
+server_keytab string* unset heimdal_gssapi 4.80
+server_mail_auth_condition string* unset authenticators 3.22
+server_mech string public_name cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
+server_password string unset gsasl 4.80
+server_param1 string* unset tls (auth) 4.86
+server_param2 string* unset tls (auth) 4.86
+server_param3 string* unset tls (auth) 4.86
+server_param2 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
+server_param3 string* unset tls (auth) 4.86 (tls-only) 4.93 (external)
+server_prompts string* unset plaintext 3.10
+server_realm string unset cyrus_sasl,gsasl 4.43 (cyrus-only) 4.80 (others)
+server_scram_iter string* unset gsasl 4.80
+server_scram_salt string* unset gsasl 4.80
+server_secret string* unset cram_md5 3.10
+server_service string "smtp" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
+server_set_id string* unset authenticators 3.10
+set string* unset routers 4.93
+shadow_condition string* unset transports
+shadow_transport string unset transports
+size_addition integer 1024 smtp 1.91
+skip_syntax_errors boolean false redirect 4.00
+smtp_accept_keepalive boolean true main
+smtp_accept_max integer 20 main
+smtp_accept_max_nonmail integer 10 main 4.11
+smtp_accept_max_nonmail_hosts host list * main 4.14
+smtp_accept_max_per_connection integer 1000 main 4.00
+smtp_accept_max_per_host integer 0 main 2.05
+smtp_accept_queue integer 0 main
+smtp_accept_queue_per_connection integer 10 main 2.03
+smtp_accept_reserve integer 0 main
+smtp_active_hostname string* unset main 4.33
+smtp_banner string* + main
+smtp_check_spool_space boolean true main 2.10
+smtp_connect_backlog integer 5 main
+smtp_enforce_sync boolean true main 4.00
+smtp_etrn_command string* unset main 1.92
+smtp_etrn_serialize boolean true main 1.89
+smtp_load_reserve fixed-point unset main
+smtp_max_synprot_errors integer 3 main 4.30
+smtp_max_unknown_commands integer 3 main 4.14
+smtp_ratelimit_hosts host list unset main 4.00
+smtp_ratelimit_mail string unset main 4.00
+smtp_ratelimit_rcpt string unset main 4.00
+smtp_receive_timeout time 5m main
+smtp_reserve_hosts host list unset main
+smtp_return_error_details boolean false main 4.11
+socket string* unset lmtp 4.11
+spamd_address string* + main 4.50 with content scan
+spf_guess string "v=spf1 a/24 mx/24 ptr ?all"
+ main 4.91 with SUPPORT_SPF
+spf_smtp_comment_template string* "Please see http://www.open-spf.org/Why"
+ main 4.94 with SUPPORT_SPF
+split_spool_directory boolean false main 1.70
+spool_directory string ++ main
+spool_wireformat boolean false main 4.90
+sqlite_dbfile string* unset main 4.94 with LOOKUP_SQLITE
+sqlite_lock_timeout time 5s main 4.53
+strict_acl_vars boolean false main 4.64
+srv_fail_domains domain list unset dnslookup 4.43
+strip_excess_angle_brackets boolean false main
+strip_trailing_dot boolean false main
+subject string* unset autoreply
+syntax_errors_text string* unset redirect 4.00
+syntax_errors_to string unset redirect 4.00
+syslog_duplication boolean true main 4.21
+syslog_facility string unset main 4.20
+syslog_processname string "exim" main 4.20
+syslog_timestamp boolean true main 4.00
+system_filter string unset main 4.00 replacing message_filter
+system_filter_directory_transport string unset main 4.00 replacing message_filter
+system_filter_file_transport string unset main 4.00 replacing message_filter
+system_filter_group string unset main 4.00 replacing message_filter
+system_filter_pipe_transport string unset main 4.00 replacing message_filter
+system_filter_reply_transport string unset main 4.00 replacing message_filter
+system_filter_user string unset main 4.00 replacing message_filter
+tcp_nodelay boolean true main 4.23
+ true smtp 4.23
+tcp_wrappers_daemon_name string* ++ main 4.73
+temp_errors string list + pipe 1.95
+text string* unset autoreply
+timeout time 5m lmtp 3.20
+ 1h pipe
+ 1h queryprogram 4.00
+ 5s iplookup 4.00
+timeout_defer boolean false pipe 4.51
+timeout_frozen_after time 0s main 3.20
+timezone string + main 3.15
+tls_advertise_hosts host list * main 3.20
+tls_advertise_requiretls host list * main 4.92 if experimental_requiretls
+tls_certificate string* unset main 3.20
+ unset smtp 3.20
+tls_dh_max_bits integer 2236 main 4.80
+tls_dh_min_bits integer 1024 smtp 4.82
+tls_dhparam string* unset main 3.20
+tls_ocsp_file string* unset main 4.80 if experimental_ocsp
+tls_on_connect_ports string unset main 4.43
+tls_privatekey string* unset main 3.20
+ unset smtp 3.20
+tls_remember_emstp boolean false main 4.21
+tls_require_ciphers string* unset smtp 4.00 replaces tls_verify_ciphers
+ string* unset main 4.33
+tls_sni string* unset main 4.80
+tls_tempfail_tryclear boolean true smtp 4.05
+tls_try_verify_hosts host list unset main 4.00
+tls_verify_certificates string* unset main 3.20
+ unset smtp 3.20
+tls_verify_hosts host list unset main 3.20
+to string* unset autoreply
+translate_ip_address string unset routers 4.00
+transport string* unset routers 4.00
+transport_current_directory string unset routers 4.00
+transport_home_directory string unset routers 4.00
+transport_filter string unset transports
+transport_filter_timeout time 5m transports 4.30
+trusted_groups string list unset main
+trusted_users string list unset main
+umask octal-integer 022 pipe
+unknown_login string unset main
+unknown_username string unset main
+unseen boolean false routers 4.00
+untrusted_set_sender boolean false main 3.20
+use_bsmtp boolean false appendfile 4.00
+ false pipe 4.00
+use_crlf boolean false appendfile 1.89
+ false pipe 1.89
+use_fcntl_lock boolean + appendfile 1.70
+use_flock_lock boolean + appendfile 4.11
+use_lockfile boolean + appendfile
+use_mbx_lock boolean + appendfile 2.10
+use_shell boolean false pipe 1.70
+user string + routers 4.00
+ unset transports 4.00 replaces individual options
+utf8_downconvert integer unset smtp 4.92 if SUPPORT_I18N
+uucp_from_pattern string + main 1.75
+uucp_from_sender string* "$1" main 1.75
+verify boolean true routers 4.00
+verify_only boolean false routers 4.00
+verify_recipient boolean true routers 4.00
+verify_sender boolean true routers 4.00
+warn_message_file string* unset main 4.00 expanded from 4.94
+widen_domains string list unset dnslookup 4.00
+write_rejectlog boolean true main 4.31
+
+
+
+2. COMMAND LINE OPTIONS
+-----------------------
+
+The table below contains a complete list of all Exim's command line options.
+Those marked with # are available only to trusted users, those marked with +
+are available only to admin users, and those marked with * exist only to
+provide compatibility with Sendmail.
+
+-- Terminate options
+--help Give a little help (not a lot)
+--version Give version information (alias for -bV)
+-B * Ignored
+-bd + Start daemon
+-bdf + Start daemon and run it in the foreground
+-be Test string expansion
+-bem Test string expansion, read test message first
+-bF Test system filter file
+-bf Test user filter file
+-bfd Set domain for filter testing
+-bfl Set local part for filter testing
+-bfp Set local part prefix for filter testing
+-bfs Set local part suffix for filter testing
+-bh Test incoming SMTP call, omitting callouts
+-bhc Test incoming SMTP call, with callouts
+-bi * Run <command>bi_command</command>
+-bI:help Show list of accepted -bI:<tag> options
+-bm Accept message on standard input
+-bmalware + Invoke configured malware scanning against supplied filename
+-bnq Don't qualify addresses in locally submitted messages
+-bP Show configuration option settings
+-bp + List the queue
+-bpa + ... with generated addresses as well
+-bpc + ... but just show a count of messages
+-bpr + ... do not sort
+-bpra + ... with generated addresses, unsorted
+-bpru + ... only undelivered addresses, unsorted
+-bpu + ... only undelivered addresses
+-brt Test retry rules
+-brw Test rewriting rules
+-bS Read batch SMTP on standard input
+-bs Run SMTP on standard input and output
+-bt Test address directing and routing
+-bV Verify version number
+-bv Test recipient address verification
+-bvs Test sender address verification
+-bw + Inetd wait mode
+-C + Use alternate configuration file
+-D + Define macro for configuration file
+-d + Turn on debugging output
+-dd + Ditto, but if a daemon, not for subprocesses
+-dropcr Remove CR character in input: became a no-op in 4.21
+-E Internal use only
+-ex * Synonym for -oex (for several different x)
+-F Set calling user name
+-f # Set calling user address
+-G * Ignored
+-h * Ignored
+-i Dot does not terminate message
+-M + Force deliver specific message
+-Mar + Add recipient to message
+-MC Internal use only
+-MCA Internal use only
+-MCP Internal use only
+-MCQ Internal use only
+-MCS Internal use only
+-MCT Internal use only
+-Mc + Deliver specific message
+-Mes + Edit message sender
+-Mf + Freeze message(s)
+-Mg + Give up (bounce) message(s)
+-Mmad + Mark all recipients delivered
+-Mmd + Mark one recipient delivered
+-Mrm + Remove message(s) (no bounce)
+-Mset + Load message's variables when testing with -be
+-Mt + Thaw message(s)
+-Mvb + View message body
+-Mvc + View entire message in RFC 2822 format
+-Mvh + View message header
+-Mvl + View message log
+-m * Ignored
+-N + Deliver without transporting
+-n * Ignored
+-O * Ignored
+-oA * Supply argument for <option>-bi</option>
+-oB Set max messages down one connection
+-odb Background delivery
+-odf Foreground delivery
+-odi Foreground delivery
+-odq Queue message; do not deliver
+-odqs ... do not do SMTP deliveries
+-oee Error sent by mail; zero return code
+-oem Error sent by mail; non-zero return code
+-oep Error written to standard error stream
+-oeq * Error written to standard error stream
+-oew * Error sent by mail; non-zero return code
+-oi Dot does not terminate message
+-oitrue * Dot does not terminate message
+-oMa # Supply host address
+-oMaa # Supply authenticator name
+-oMai # Supply authenticated id
+-oMas # Supply authenticated sender
+-oMi # Supply interface address
+-oMm # Supply message reference
+-oMr # Supply protocol name
+-oMs # Supply host name
+-oMt # Supply ident string
+-om * Ignored
+-oo * Ignored
+-oP * Specify path for daemon's pid file
+-or Timeout non-SMTP messages
+-os Timeout for SMTP messages
+-ov * Verbose; same as -v
+-oX Alternative port for daemon
+-pd Delay Perl interpreter start
+-ps Do not delay Perl interpreter start
+-p<r>:<s> * Same as -oMr <r> -oMs <s>
+-q + Run the queue )
+-qf + ... force delivery ) Other combinations are
+-qff + ... and include frozen messages ) possible. The syntax is
+-qi + ... initial deliveries only )
+-ql + ... local deliveries only ) -q[q][f][f][i|l][time]
+-qq + Two-stage queue run )
+-qR * Same as -R
+-qS * Same as -S
+-R Select by recipient in queue run
+-Rf ... with forcing
+-Rff ... and frozen messages
+-Rr ... using regular expression
+-Rrf ... with forcing
+-Rrff ... and frozen messages
+-r * Synonym for -f
+-S Select by sender in queue run
+-Sf ... with forcing
+-Sff ... and frozen messages
+-Sr ... using regular expression
+-Srf ... with forcing
+-Srff ... and frozen messages
+-Tqt * Used by Exim test suite; not recognized in normal use
+-t Take recipients from header lines
+-ti * Same as -t -i
+-tls-on-connect Do TLS on startup (for legacy clients)
+-U * Ignored
+-v Verbose - shows SMTP dialogue and other delivery info
+-x Ignored (AIX compatibility)
+
+
+3. BUILD TIME OPTIONS FOR EXIM
+------------------------------
+
+The table below contains a "mostly" complete list of options that can be
+set in Local/Makefile when building Exim. The only items not included are
+those whose names can be trivially derived from rules stated below.
+
+More information about individual options can be found in src/EDITME and
+OS/Makefile-Default.
+
+The second column below gives the type of option:
+
+ . `system' means the option is concerned with the operating system;
+
+ . `driver' means the option selects a driver to be included in the binary;
+
+ . `lookup' means the option selects a lookuptype to be included in the binary;
+
+ . `mandatory' means the option is required to be supplied;
+
+ . `recommended' means the option is recommended to be supplied;
+
+ . `optional' means what it says;
+
+Those marked with * are specialized and are unlikely to be required in most
+installations. Those that are marked with ** are commonly set in OS-specific
+Makefiles. If you use any of these in your Local/Makefile, you may need to
+reproduce some of the OS-specific settings. For example, in the Makefile for
+Solaris (which is actually called OS/Makefile-SunOS5), there is
+
+ LIBS=-lsocket -lnsl -lkstat
+
+If you use LIBS to add extra libraries, you must also include the OS ones in
+your setting. It is better, in this particular case, to use EXTRALIBS, which is
+empty by default, and is provided for just this reason. Of course, if you do
+actually want to modify a setting from the OS-specific file, there is nothing
+to stop you overriding it in your Local/Makefile.
+
+When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
+you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
+libraries specific only to that module. These rules are only used where the
+relevant lookup is a module. These options are not explicitly listed below.
+
+Variables with names endined `_PC' are used for pkg-config integration; setting
+the value to the name of a pkg-config package will cause Exim's build system to
+query the --cflags and --libs for the given name, when building anything
+dependent upon the component associated with the `_PC' variable. For lookups,
+if the lookup is dynamically loaded, then this *replaces* the use of the
+corresponding _INCLUDE and _LIBS options, which will be ignored. If the lookup
+is statically loaded into Exim, the results will be inserted into the
+"LOOKUP_INCLUDE" and "LOOKUP_LIBS" options. For authenticator, the results
+will be inserted into the "CFLAGS" and "AUTH_LIBS" options. These options are
+only listed below for the TLS implementation cases.
+
+
+Option Type Description
+------------------------------------------------------------------------------
+
+ALT_CONFIG_PREFIX optional restricts location of -C files
+APPENDFILE_MODE optional*
+APPENDFILE_DIRECTORY_MODE optional*
+APPENDFILE_LOCKFILE_MODE optional*
+AR system command to build a library
+AUTH_CRAM_MD5 driver include cram_md5 authenticator
+AUTH_CYRUS_SASL driver include Cyrus SASL authenticator
+AUTH_GSASL driver include GNU SASL authenticator
+AUTH_HEIMDAL_GSSAPI driver include Heimdal GSSAPI authenticator
+AUTH_LIBS system library linkage for authenticators
+AUTH_PLAINTEXT driver include plaintext authenticator
+AUTH_SPA driver include SPA (NTLM) authenticator
+AUTH_VARS=3 optional* number of $auth variables
+BASENAME_COMMAND system** path to basename
+BASE_62=62 optional* not normally changed for Unix
+BIN_DIRECTORY mandatory Exim binary directory
+CC system** C compiler
+CFLAGS system** flags for C compiler
+CFLAGS_DYNAMIC system** extra flags needed for .so modules
+CHGRP_COMMAND system** path to chgrp
+CHOWN_COMMAND system** path to chown
+COMPRESS_COMMAND system path to a compress command
+COMPRESS_SUFFIX system suffix added to compressed files
+CONFIGURE_FILE mandatory Exim runtime configuration file
+CONFIGURE_FILE_USE_EUID optional*
+CONFIGURE_FILE_USE_NODE optional*
+CONFIGURE_GROUP optional* alternate group for configuration file
+CONFIGURE_OWNER optional* alternate owner for configuration file
+CYRUS_PWCHECK_SOCKET optional socket for pwcheck daemon
+DBMLIB optional** location of DBM library
+DB_DIRECTORY_MODE optional* mode for hints directory
+DB_LOCKFILE_MODE optional* mode for hints lock files
+DB_LOCK_TIMEOUT optional* timeout for hints lock files
+DB_MODE optional* mode for hints files
+DEFAULT_CRYPT optional default crypt() function
+DELIVER_IN_BUFFER_SIZE optional*
+DELIVER_OUT_BUFFER_SIZE optional*
+DISABLE_DKIM optional disables DKIM support
+DISABLE_DNSSEC optional disables attempts to use DNSSEC
+DISABLE_D_OPTION optional disables -D option
+ERRNO_QUOTA optional* error code for system quota failures
+EXICYCLOG_MAX optional number of old log files to keep
+EXIMDB_DIRECTORY_MODE optional* for hints database directory
+EXIMDB_LOCKFILE_MODE optional* for hints lock files
+EXIMDB_MODE optional* mode for hints files
+EXIMON_TEXTPOP system**
+EXIM_CHMOD optional*
+EXIM_GROUP mandatory group to use for Exim
+EXIM_MONITOR optional set to eximon.bin to compile
+EXIM_PERL optional
+EXIM_USER mandatory user to use for Exim
+EXIWHAT_EGREP_ARG system** to find Exim processes from ps
+EXIWHAT_KILL_SIGNAL system** -SIGUSR1 or numerical equivalent
+EXIWHAT_MULTIKILL_CMD system**
+EXIWHAT_MULTIKILL_ARG system**
+EXIWHAT_PS_ARG system** to list all processes
+EXIWHAT_PS_CMD system** path to ps command
+EXPAND_LISTMATCH_RHS optional* restore pre-4.77 match_*{}{} behaviour
+EXTRALIBS system additional libraries
+EXTRALIBS_EXIM system additional libraries for Exim only
+EXTRALIBS_EXIMON system additional libraries for the monitor
+FIXED_NEVER_USERS optional can't override at runtime
+HAVE_ICONV system the iconv() function is available
+HAVE_IPV6 system include IPv6 support
+HEADERS_CHARSET optional charset for decoded header lines
+HEADER_ADD_BUFFER_SIZE optional* buffer for header_add()
+HEADER_MAXSIZE optional* max memory for message header
+HOSTNAME_COMMAND system** path to hostname command
+INCLUDE system path to include files
+INFO_DIRECTORY optional directory for Info documentation
+INPUT_DIRECTORY_MODE optional mode for input directory
+IPV6_INCLUDE system additional includes for IPv6
+IPV6_LIBS system additional libraries for IPv6
+LDAP_LIB_TYPE optional type of LDAP library
+LFLAGS system** link editor flags
+LIBIDENTCFLAGS system C flags when compiling libident
+LIBIDENTNAME system name for libident library
+LIBRESOLV system** library for DNS resolver
+LIBS system** additional libraries
+LIBS_EXIM system** additional libraries for Exim ony
+LIBS_EXIMON system** additional libraries for monitor
+LOCAL_SCAN_SOURCE optional location of local_scan() source
+LOG_DIRECTORY_MODE optional mode for log directory
+LOG_FILE_PATH optional path to log files
+LOG_MODE optional mode for log files
+LOOKUP_CDB lookup include cdb lookup
+LOOKUP_DBM lookup include dbm lookup
+LOOKUP_DNSDB lookup include dnsdb lookup
+LOOKUP_DSEARCH lookup include dsearch lookup
+LOOKUP_INCLUDE lookup include files for lookups
+LOOKUP_LDAP lookup include ldap lookup
+LOOKUP_LIBS lookup include libraries for lookups
+LOOKUP_LSEARCH lookup include all lsearch lookups
+LOOKUP_MODULE_DIR optional* where dynamic lookup modules live
+LOOKUP_MYSQL lookup include mysql lookup
+LOOKUP_NIS lookup include nis lookup
+LOOKUP_NISPLUS lookup include nisplus lookup
+LOOKUP_ORACLE lookup include oracle lookup
+LOOKUP_PGSQL lookup include pgsql lookup
+LOOKUP_TESTDB lookup*
+LOOKUP_WHOSON lookup include whoson lookup
+LOOKUP_*_INCLUDE optional* include files for dynamic module
+LOOKUP_*_LIBS optional* libraries for dynamic module
+MAKE_SHELL optional* shell to use for make
+MAX_FILTER_SIZE optional* max file size for filter files
+MAX_INCLUDE_SIZE optional* max file size for :include: files
+MAX_LOCALHOST_NUMBER=256 optional* for when localhost_number is set
+MAX_NAMED_LIST optional* max named lists of a given type
+MAX_INTERFACES system maximum network interfaces
+MSGLOG_DIRECTORY_MODE optional* mode for message log directory
+MV_COMMAND system path to mv command
+NO_SYMLINK optional install doesn't make 'exim" symlink
+PCRE_CONFIG system* use pcre-config for PCRE support
+PCRE_LIBS system* library for using PCRE
+PERL_CC system* compiler for Perl interface code
+PERL_CCOPTS system* flags for same
+PERL_COMMAND system path to Perl
+PERL_LIBS system* library for compiling Perl interface
+PID_FILE_PATH optional path to daemon's pid file
+RADIUS_CONFIG_FILE optional path to Radius config file
+RADIUS_LIB_TYPE optional type of RADIUS library
+RANLIB system** path to ranlib command
+RM_COMMAND system path to rm command
+ROUTER_ACCEPT driver include accept router
+ROUTER_DNSLOOKUP driver include dnslookup router
+ROUTER_MANUALROUTE driver include manualroute router
+ROUTER_IPLITERAL driver include ipliteral router
+ROUTER_IPLOOKUP driver include iplookup router
+ROUTER_REDIRECT driver include redirect router
+ROUTER_QUERYPROGRAM driver include queryprogram router
+SPOOL_DIRECTORY recommended path to spool directory
+SPOOL_DIRECTORY_MODE optional mode of spool directory
+SPOOL_MODE optional mode of spool files
+STRING_SPRINTF_BUFFER_SIZE optional* buffer for string_sprintf()
+STRIP_COMMAND optional* can be used to strp binaries
+SUPPORT_A6 optional* support A6 DNS records
+SUPPORT_CRYPTEQ optional support crypteq (if no auths)
+SUPPORT_MAILDIR optional support for maildir delivery
+SUPPORT_MAILSTORE optional support for mailstore delivery
+SUPPORT_MBX optional support for MBX delivery
+SUPPORT_MOVE_FROZEN_MESSAGES optional* support for frozen message moving
+SUPPORT_PAM optional support for PAM authentication
+SUPPORT_TLS optional support for TLS encryption over SMTP
+SUPPORT_TRANSLATE_IP_ADDRESS optional* support for address translation
+SYSLOG_LOG_PID optional add pid to syslog lines
+SYSLOG_LONG_LINES optional do not split long syslog lines
+SYSTEM_ALIASES_FILE optional defaults to /etc/aliases
+TCP_WRAPPERS_DAEMON_NAME system* daemon name used by tcpwrappers library
+TIMEZONE_DEFAULT optional default for timezone option
+TLS_INCLUDE optional path to include files for TLS
+TLS_LIBS optional additional libraries for TLS
+EXIM_TMPDIR system value for TMPDIR environment variable
+TRANSPORT_APPENDFILE driver include appendfile transport
+TRANSPORT_AUTOREPLY driver include autoreply transport
+TRANSPORT_LMTP driver include lmtp transport
+TRANSPORT_PIPE driver include pipe transport
+TRANSPORT_SMTP driver include smtp transport
+TRUSTED_CONFIG_LIST optional config files safe to retain privileges
+USE_DB system** use native DB interface
+USE_GNUTLS optional use GnuTLS instead of OpenSSL
+USE_GNUTLS_PC optional probably "gnutls"
+USE_OPENSSL_PC optional probably "openssl"
+USE_READLINE optional try to load libreadline for -be
+USE_TCP_WRAPPERS system link with tcpwrappers
+USE_TDB optional use the tdb DB interface
+WHITELIST_D_MACROS optional -Dmacros safe to retain privileges with
+WITH_OLD_CLAMAV_STREAM optional* use ClamAV API from before ClamAV 0.95
+X11 system** X11 base directory
+X11_LD_LIB system** X11 link library
+XINCLUDE system** X11 include directory
+XLFLAGS system** X11 link time flags
+ZCAT_COMMAND system path to zcat command
+
+
+4. BUILD TIME OPTIONS FOR EXIMON
+--------------------------------
+
+The table below contains a complete list of options that can be set in
+Local/eximon.conf when building the Exim monitor. Where the default is shown as
+** it means that the text string is too long to fit in the table and is instead
+given below. A blank default means that there is no default value.
+
+ACTION_OUTPUT=no show output for every action
+ACTION_QUEUE_UPDATE=yes update queue display after actions
+BODY_MAX=20000 maximum body display
+DOMAIN= domain to strip from window title
+LOG_BUFFER=20K buffer for log tail
+LOG_DEPTH=300 depth of log subwindow
+LOG_FONT=** font for log display
+LOG_STRIPCHARTS=** patterns for stripcharts
+LOG_WIDTH=950 width of log subwindow
+MENU_EVENT='Shift<Btn1Down>' keypress for menu
+MIN_HEIGHT=162 minimum window height
+MIN_WIDTH=103 minimum window width
+QUALIFY_DOMAIN= local domain to strip from addresses
+QUEUE_DEPTH=200 depth of queue subwindow
+QUEUE_FONT=$LOG_FONT font for queue display
+QUEUE_INTERVAL=300 queue refresh interval
+QUEUE_MAX_ADDRESSES=10 max addresses to show in queue
+QUEUE_STRIPCHART_NAME=queue name for queue stripchart
+QUEUE_WIDTH=950 width of queue subwindow
+SIZE_STRIPCHART= request partition size stripchart
+SIZE_STRIPCHART_NAME=space name for size stripchart
+START_SMALL=no if yes, start with small window
+STRIPCHART_INTERVAL=60 stripchart refresh interval
+TEXT_DEPTH=200 depth of text windows
+WINDOW_TITLE="${hostname} eximon" window title
+
+The default for LOG_FONT is
+
+ LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
+
+and the default for LOG_STRIPCHARTS is
+
+ LOG_STRIPCHARTS='/ <= /in/
+ / => /out/
+ / => .+ R=local/local/
+ / => .+ T=[^ ]*smtp/smtp/'
+
+That is, there are four stripcharts, named in, out, local, and smtp. The first
+counts message arrivals, the second counts all deliveries, the third counts
+deliveries where the router's name starts with "local", and the fourth counts
+deliveries where the transport name contains "smtp".
+
+**** End of OptionLists ****