diff options
Diffstat (limited to '')
| -rw-r--r-- | src/exinext.src | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/src/exinext.src b/src/exinext.src new file mode 100644 index 0000000..9138018 --- /dev/null +++ b/src/exinext.src @@ -0,0 +1,262 @@ +#! /bin/sh + +# Copyright (c) University of Cambridge, 1995 - 2007 +# See the file NOTICE for conditions of use and distribution. + +# Except when they appear in comments, the following placeholders in this +# source are replaced when it is turned into a runnable script: +# +# CONFIGURE_FILE_USE_NODE +# CONFIGURE_FILE +# BIN_DIRECTORY + +# PROCESSED_FLAG + +# A shell+perl script to fish out the next retry time for a given domain; +# it first calls exim to find out which hosts are set up for that domain and +# then fishes out the retry data for each one. + +# For testing the selection and formatting logic, and perhaps for use in +# special cases, the script can have an argument -C <filename> to specify +# the use of an alternate Exim configuration file. It may also have any number +# of -D options to set macros that are passed to exim. + +config= +eximmacdef= +exim_path= + +if test "x$1" = x--version +then + echo "`basename $0`: $0" + echo "build: EXIM_RELEASE_VERSIONEXIM_VARIANT_VERSION" + exit 0 +fi + +if expr -- $1 : '\-' >/dev/null ; then + while expr -- $1 : '\-' >/dev/null ; do + if [ "$1" = "-C" ]; then + config=$2 + shift + shift + elif expr -- $1 : '\-D' >/dev/null ; then + eximmacdef="$eximmacdef $1" + if expr -- $1 : '\-DEXIM_PATH=' >/dev/null ; then + exim_path=`expr -- $1 : '\-DEXIM_PATH=\(.*\)'` + fi + shift + else + break + fi + done +fi + +# We need to save the script's argument because in the absence of -C we need to +# use shell arguments for sorting out the configuration file name. + +argone=$1 + +# This is the normal case when no config file or macros are specified + +if [ "$config" = "" ]; then + # See if this installation is using the esoteric "USE_NODE" feature of Exim, + # in which it uses the host's name as a suffix for the configuration file name. + + if [ "CONFIGURE_FILE_USE_NODE" = "yes" ]; then + hostsuffix=.`uname -n` + fi + + # Now find the configuration file name. This has got complicated because + # CONFIGURE_FILE may now be a list of files. The one that is used is the first + # one that exists. Mimic the code in readconf.c by testing first for the + # suffixed file in each case. + + set `awk -F: '{ for (i = 1; i <= NF; i++) print $i }' <<End +CONFIGURE_FILE +End +` + while [ "$config" = "" -a $# -gt 0 ] ; do + if [ -f "$1$hostsuffix" ] ; then + config="$1$hostsuffix" + elif [ -f "$1" ] ; then + config="$1" + fi + shift + done +fi + +# Determine where the spool directory is. Search for an exim_path setting +# in the configure file; otherwise use the bin directory. Call that version of +# Exim to find the spool directory and the qualify domain. BEWARE: a tab +# character is needed in the command below. It has had a nasty tendency to get +# lost in the past. Use a variable to hold a space and a tab to keep the tab in +# one place. + +st=' ' + +if [ "$exim_path" = "" ]; then + exim_path=`grep "^[$st]*exim_path" $config | sed "s/.*=[$st]*//"` +fi + +if test "$exim_path" = ""; then exim_path=BIN_DIRECTORY/exim; fi +spool_directory=`$exim_path $eximmacdef -C $config -bP spool_directory | sed 's/.*=[ ]*//'` +qualify_domain=`$exim_path $eximmacdef -C $config -bP qualify_domain | sed 's/.*=[ ]*//'` + +# Now do the job. Perl uses $ so frequently that we don't want to have to +# escape them all from the shell, so pass in shell variable values as +# arguments. + +# 16-May-1996 Fixed it to do better if routing fails to complete. +# Improved the format of the output. +# 10-Jun-1996 Complain if no argument given. +# 02-Aug-1996 Lower case the domain. +# 14-Jan-1999 Add subject to want list even if remote host found, so as to +# pick up routing delays after temporary recipient errors. +# Also add unqualified subject if it looks like a message id. +# 01-Apr-2004 Add the -C feature for testing +# 22-Dec-2005 Complete the -C feature (!) + +if [ "$argone" = "" ]; then + echo "Usage: exinext <address>|<domain>|<local-part>" + exit 1 +fi + +perl - $exim_path "$eximmacdef" $argone $spool_directory $qualify_domain $config <<'End' + + # We don't import anything, but guard against future changes which do + BEGIN { pop @INC if $INC[-1] eq '.' }; + + # Name the arguments + + $exim = $ARGV[0]; + $eximmacdef = $ARGV[1]; + $subject = $ARGV[2]; + $spool = $ARGV[3]; + $qualify = $ARGV[4]; + $config = $ARGV[5]; + + # If the subject doesn't contain an @ then construct an address + # for the domain, and ensure that in both cases the domain is + # lower cased. + + $address = ($subject =~ /^([^\@]*)\@([^\@]*)$/)? + "$1\@\L$2\E" : "User\@\L$subject\E"; + + # Run Exim to get a list of hosts for the given domain; for + # each one construct the appropriate retry key. + + open(LIST, "$exim -C $config -v -bt $address |") || + die "can't run exim to route $address"; + + while (<LIST>) + { + chop; + push(@list, $_) if s/\s*host (\S+)\s+\[(.+)\].*/$1:$2/; + print "$_\n" if /cannot be resolved/; + } + close(LIST); + + # If there were no hosts, assume that what was given was a local + # username, unless it contains an @, and construct a suitable retry + # key for that. Also, if it looks like a message id, search for that + # as well, so as to pick up message-specific retry data. + + if (scalar(@list) == 0) + { + push(@list, $subject) if $subject =~ /^\w{6}-\w{6}-\w{2}$/; + + if ($subject !~ /\@/ && $subject !~ /\./) + { + push(@list, "$subject\@$qualify"); + } + else + { + print "No remote hosts found for $subject\n"; + } + } + + # Always search for the full address, even if hosts are found, in case + # there is a routing delay caused by a temporary recipient error. + + push(@list, $subject); + + # Run exim_dumpdb to get out the retry data and pick off what we want + + open(DATA, "${exim}_dumpdb $spool retry |") || + die "can't run exim_dumpdb"; + + while (<DATA>) + { + for ($i = 0; $i <= $#list; $i++) + { + if (/$list[$i]/) + { + $printed = 1; + if (/^\s*T:[^:\s]*:/) + { + ($key,$error,$error2,$text) = /^\s*T:(\S+)\s+(\S+)\s+(\S+)\s*(.*)$/; + + # Parsing the keys is a nightmare because of IPv6. The design of the + # format for the keys is a complete shambles. All my fault (PH). But + # I don't want to change it just for this purpose. If they key + # contains more than 3 colons, we have an IPv6 address, because + # an IPv6 address must contain at least two colons. + + # Deal with IPv4 addresses (3 colons or fewer) + + if ($key !~ /:([^:]*?:){3}/) + { + ($host,$ip,$port,$msgid) = $key =~ + /^([^:]*):([^:]*)(?::([^:]*)(?::(\S*)|)|)/; + } + + # Deal with IPv6 addresses; sorting out the colons is a complete + # mess. We should be able to find the host name and IP address from + # further in the message. That seems the easiest escape plan here. We + # can use those to match the rest of the key. + + else + { + ($host,$ip) = $text =~ /host\s(\S+)\s\[([^]]+)\]/; + if (defined $host) + { + ($port,$msgid) = $key =~ + /^$host:$ip(?::([^:]*)(?::(\S*)|)|)/; + } + + # This will probably be wrong... + + else + { + ($host,$ip) = $key =~ /([^:]*):(.*)/; + } + } + + printf("Transport: %s [%s]", $host, $ip); + print ":$port" if defined $port; + print " $msgid" if defined $msgid; + print " error $error: $text\n"; + } + + else + { + ($type,$domain,$error,$error2,$text) = + /^\s*(\S):(\S+)\s+(\S+)\s+(\S+)\s*(.*)$/; + $type = ($type eq 'R')? "Route: " : + ($type eq 'T')? "Transport: " : ""; + print "$type$domain error $error: $text\n"; + } + $_ = <DATA>; + ($first,$last,$next,$expired) = + /^(\S+\s+\S+)\s+(\S+\s+\S+)\s+(\S+\s+\S+)\s*(\*?)/; + print " first failed: $first\n"; + print " last tried: $last\n"; + print " next try at: $next\n"; + print " past final cutoff time\n" if $expired eq "*"; + } + } + } + + close(DATA); + print "No retry data found for $subject\n" if !$printed; +End + |