From 933bbaf3ed7bd659a5c044745aea763815928598 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 11:44:08 +0200 Subject: Adding debian version 4.94.2-7+deb11u2. Signed-off-by: Daniel Baumann --- .../debconf/conf.d/router/200_exim4-config_primary | 92 ++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 debian/debconf/conf.d/router/200_exim4-config_primary (limited to 'debian/debconf/conf.d/router/200_exim4-config_primary') diff --git a/debian/debconf/conf.d/router/200_exim4-config_primary b/debian/debconf/conf.d/router/200_exim4-config_primary new file mode 100644 index 0000000..0022dc6 --- /dev/null +++ b/debian/debconf/conf.d/router/200_exim4-config_primary @@ -0,0 +1,92 @@ + +### router/200_exim4-config_primary +################################# +# This file holds the primary router, responsible for nonlocal mails + +.ifdef DCconfig_internet +# configtype=internet +# +# deliver mail to the recipient if recipient domain is a domain we +# relay for. We do not ignore any target hosts here since delivering to +# a site local or even a link local address might be wanted here, and if +# such an address has found its way into the MX record of such a domain, +# the local admin is probably in a place where that broken MX record +# could be fixed. + +dnslookup_relay_to_domains: + debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain" + driver = dnslookup + domains = ! +local_domains : +relay_to_domains + transport = remote_smtp + same_domain_copy_routing = yes + no_more + +# ignore private rfc1918, loopback, APIPA/link-local, local broadcast, unspecified, unique local, linked-scoped unicast and discard-Only +.ifndef ROUTER_DNSLOOKUP_IGNORE_TARGET_HOSTS +ROUTER_DNSLOOKUP_IGNORE_TARGET_HOSTS = <; 0.0.0.0 ; 127.0.0.0/8 ; 192.168.0.0/16 ; 172.16.0.0/12 ; 10.0.0.0/8 ; 169.254.0.0/16 ; 255.255.255.255 ; ::/128 ; ::1/128 ; fc00::/7 ; fe80::/10 ; 100::/64 +.endif + +# deliver mail directly to the recipient. This router is only reached +# for domains that we do not relay for. Since we most probably can't +# have broken MX records pointing to site local or link local IP +# addresses fixed, we ignore target hosts pointing to these addresses. + +dnslookup: + debug_print = "R: dnslookup for $local_part@$domain" + driver = dnslookup + domains = ! +local_domains + transport = remote_smtp + same_domain_copy_routing = yes + ignore_target_hosts = ROUTER_DNSLOOKUP_IGNORE_TARGET_HOSTS + no_more + +.endif + + +.ifdef DCconfig_local +# configtype=local +# +# Stand-alone system, so generate an error for mail to a non-local domain +nonlocal: + debug_print = "R: nonlocal for $local_part@$domain" + driver = redirect + domains = ! +local_domains + allow_fail + data = :fail: Mailing to remote domains not supported + no_more + +.endif + + +.ifdef DCconfig_smarthost DCconfig_satellite +# configtype=smarthost or configtype=satellite +# +# Send all non-local mail to a single other machine (smarthost). +# +# This means _ALL_ non-local mail goes to the smarthost. This will most +# probably not do what you want for domains that are listed in +# relay_domains. The most typical use for relay_domains is to control +# relaying for incoming e-mail on secondary MX hosts. In that case, +# it doesn't make sense to send the mail to the smarthost since the +# smarthost will probably send the message right back here, causing a +# loop. +# +# If you want to use a smarthost while being secondary MX for some +# domains, you'll need to copy the dnslookup_relay_to_domains router +# here so that mail to relay_domains is handled separately. + +smarthost: + debug_print = "R: smarthost for $local_part@$domain" + driver = manualroute + domains = ! +local_domains + transport = remote_smtp_smarthost + route_list = * DCsmarthost byname + host_find_failed = ignore + same_domain_copy_routing = yes + no_more + +.endif + + +# The "no_more" above means that all later routers are for +# domains in the local_domains list, i.e. just like Exim 3 directors. -- cgit v1.2.3