Adding upstream version 86.0.1.upstream/86.0.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 367 insertions, 0 deletions

diff --git a/l10n-xh/mail/chrome/messenger/messengercompose/composeMsgs.properties b/l10n-xh/mail/chrome/messenger/messengercompose/composeMsgs.properties
new file mode 100644
index 0000000000..7db53b726a
--- /dev/null
+++ b/l10n-xh/mail/chrome/messenger/messengercompose/composeMsgs.properties
@@ -0,0 +1,367 @@
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+#
+# The following are used by the compose back end
+#
+## LOCALIZATION NOTE (unableToOpenFile, unableToOpenTmpFile):
+## %S will be replaced with the name of file that could not be opened
+unableToOpenFile=Unable to open the file %S.
+unableToOpenTmpFile=Unable to open the temporary file %S. Check your 'Temporary Directory' setting.
+unableToSaveTemplate=Unable to save your message as a template.
+unableToSaveDraft=Unable to save your message as a draft.
+couldntOpenFccFolder=Couldn't open the Sent Mail folder. Please verify that your account settings are correct.
+noSender=No sender was specified. Please add your email address in the account settings.
+noRecipients=No recipients were specified. Please enter a recipient or newsgroup in the addressing area.
+errorWritingFile=Error writing temporary file.
+
+## LOCALIZATION NOTE (errorSendingFromCommand): argument %s is the Outgoing server (SMTP) response
+errorSendingFromCommand=An error occurred while sending mail. The mail server responded: %s. Please verify that your email address is correct in your account settings and try again.
+
+## LOCALIZATION NOTE (errorSendingDataCommand): argument %s is the Outgoing server (SMTP) response
+errorSendingDataCommand=An Outgoing server (SMTP) error occurred while sending mail. The server responded:  %s.
+
+## LOCALIZATION NOTE (errorSendingMessage): argument %s is the Outgoing server (SMTP) response
+errorSendingMessage=An error occurred while sending mail. The mail server responded:  %s. Please check the message and try again.
+postFailed=The message could not be posted because connecting to the news server failed. The server may be unavailable or is refusing connections. Please verify that your news server settings are correct and try again.
+errorQueuedDeliveryFailed=An error occurred while delivering the unsent messages.
+sendFailed=Sending of the message failed.
+
+## LOCALIZATION NOTE (smtpServerError): argument %s is the Outgoing server (SMTP) response
+smtpServerError=An error occurred while sending mail: Outgoing server (SMTP) error. The server responded:  %s.
+unableToSendLater=Sorry, we were unable to save your message for sending later.
+
+## LOCALIZATION NOTE (communicationsError): argument %d is the error code
+communicationsError=A communications error occurred: %d.  Please try again.
+dontShowAlert=THIS IS JUST A PLACEHOLDER.  YOU SHOULD NEVER SEE THIS STRING.
+
+mimeMpartAttachmentError=Attachment error.
+failedCopyOperation=The message was sent successfully, but could not be copied to your Sent folder.
+nntpNoCrossPosting=You can only send a message to one news server at a time.
+msgCancelling=Cancelling…
+sendFailedButNntpOk=Your message has been posted to the newsgroup but has not been sent to the other recipient.
+errorReadingFile=Error reading file.
+followupToSenderMessage=The author of this message has requested that responses be sent only to the author. If you also want to reply to the newsgroup, add a new row to the addressing area, choose Newsgroup from the recipients list, and enter the name of the newsgroup.
+
+## LOCALIZATION NOTE (errorAttachingFile): argument %S is the file name/URI of the object to be attached
+errorAttachingFile=There was an error attaching %S. Please check that you have access to the file.
+
+## LOCALIZATION NOTE (incorrectSmtpGreeting): argument %s is the Outgoing server (SMTP) greeting
+incorrectSmtpGreeting=An error occurred while sending mail: The mail server sent an incorrect greeting:  %s.
+
+## LOCALIZATION NOTE (errorSendingRcptCommand): argument %1$S is the Outgoing server (SMTP) response, argument %2$S is the intended message recipient.
+errorSendingRcptCommand=An error occurred while sending mail. The mail server responded:  \n%1$S.\n Please check the message recipient "%2$S" and try again.
+
+## LOCALIZATION NOTE (startTlsFailed): argument %S is the Outgoing server (SMTP)
+startTlsFailed=An error occurred while sending mail: Unable to establish a secure link with Outgoing server (SMTP) %S using STARTTLS since it doesn't advertise that feature. Switch off STARTTLS for that server or contact your service provider.
+
+## LOCALIZATION NOTE (smtpPasswordUndefined): argument %S is the Outgoing server (SMTP) account
+smtpPasswordUndefined=An error occurred while sending mail: Could not get password for %S. The message was not sent.
+
+## LOCALIZATION NOTE (smtpTempSizeExceeded): argument %s is the Outgoing server (SMTP) response
+smtpTempSizeExceeded=The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded:  %s.
+
+## LOCALIZATION NOTE (smtpPermSizeExceeded1): argument %d is the Outgoing server (SMTP) size limit
+smtpPermSizeExceeded1=The size of the message you are trying to send exceeds the global size limit (%d bytes) of the server. The message was not sent; reduce the message size and try again.
+
+## LOCALIZATION NOTE (smtpPermSizeExceeded2): argument %s is the Outgoing server (SMTP) response
+smtpPermSizeExceeded2=The size of the message you are trying to send exceeds the global size limit of the server. The message was not sent; reduce the message size and try again. The server responded:  %s.
+
+## LOCALIZATION NOTE (smtpSendFailedUnknownServer): argument %S is the Outgoing server (SMTP)
+smtpSendFailedUnknownServer=An error occurred while sending mail: Outgoing server (SMTP) %S is unknown. The server may be incorrectly configured. Please verify that your Outgoing server (SMTP) settings are correct and try again.
+
+## LOCALIZATION NOTE (smtpSendInterrupted): argument %S is the Outgoing server (SMTP)
+smtpSendInterrupted=The message could not be sent because the connection to Outgoing server (SMTP) %S was lost in the middle of the transaction. Try again.
+
+## LOCALIZATION NOTE (smtpSendTimeout): argument %S is the Outgoing server (SMTP)
+smtpSendTimeout=The message could not be sent because the connection to Outgoing server (SMTP) %S timed out. Try again.
+
+## LOCALIZATION NOTE (smtpSendFailedUnknownReason): argument %S is the Outgoing server (SMTP)
+smtpSendFailedUnknownReason=The message could not be sent using Outgoing server (SMTP) %S for an unknown reason. Please verify that your Outgoing server (SMTP) settings are correct and try again.
+
+# LOCALIZATION NOTE (smtpHintAuthEncryptToPlainNoSsl): %S is the server hostname
+smtpHintAuthEncryptToPlainNoSsl=The Outgoing server (SMTP) %S does not seem to support encrypted passwords. If you just set up the account, try changing the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)' to 'Password, transmitted insecurely'. If it used to work but now doesn't, you may be susceptible to getting your password stolen.
+
+# LOCALIZATION NOTE (smtpHintAuthEncryptToPlainSsl): %S is the server hostname
+smtpHintAuthEncryptToPlainSsl=The Outgoing server (SMTP) %S does not seem to support encrypted passwords. If you just set up the account, try changing the 'Authentication method' in 'Account settings | Outgoing server (SMTP)' to 'Normal password'.
+
+# LOCALIZATION NOTE (smtpHintAuthPlainToEncrypt): %S is the server hostname
+smtpHintAuthPlainToEncrypt=The Outgoing server (SMTP) %S does not allow plaintext passwords. Please try changing the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)' to 'Encrypted password'.
+
+# LOCALIZATION NOTE (smtpAuthFailure): %S is the server hostname
+smtpAuthFailure=Unable to authenticate to Outgoing server (SMTP) %S. Please check the password and verify the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)'.
+
+# LOCALIZATION NOTE (smtpAuthGssapi): %S is the server hostname
+smtpAuthGssapi=The Kerberos/GSSAPI ticket was not accepted by the Outgoing server (SMTP) %S. Please check that you are logged in to the Kerberos/GSSAPI realm.
+
+# LOCALIZATION NOTE (smtpAuthMechNotSupported): %S is the server hostname
+smtpAuthMechNotSupported=The Outgoing server (SMTP) %S does not support the selected authentication method. Please change the 'Authentication method' in 'Account Settings | Outgoing Server (SMTP)'.
+
+# LOCALIZATION NOTE (errorIllegalLocalPart): %s is an email address with an illegal localpart
+errorIllegalLocalPart=There are non-ASCII characters in the local part of the recipient address %s. This is not yet supported. Please change this address and try again.
+
+## Strings used for the save message dialog shown when the user closes a message compose window
+saveDlogTitle=Gcina Umyalezo
+
+## generics string
+defaultSubject=(akukho ntloko)
+chooseFileToAttach=Qhoboshela Iifayili
+genericFailureExplanation=Please verify that your account settings are correct and try again.
+
+## LOCALIZATION NOTE (undisclosedRecipients): this string must use only US_ASCII characters
+undisclosedRecipients=undisclosed-recipients
+
+# LOCALIZATION NOTE (chooseFileToAttachViaCloud): %1$S is the cloud
+# provider to save the file to.
+chooseFileToAttachViaCloud=Attach File(s) via %1$S
+
+## Strings used by the empty subject dialog
+subjectEmptyTitle=Subject Reminder
+subjectEmptyMessage=Your message doesn't have a subject.
+sendWithEmptySubjectButton=&Send Without Subject
+cancelSendingButton=&Cancel Sending
+
+## Strings used by the dialog that informs about the lack of newsgroup support.
+noNewsgroupSupportTitle=Newsgroups Not Supported
+recipientDlogMessage=Le akhawunti ixhasa abamkeli bemeyile kuphela. Ukuqhuba kuya kungawahoyi amaqela eendaba.
+
+## Strings used by the alert that tells the user that an e-mail address is invalid.
+addressInvalidTitle=Invalid Recipient Address
+addressInvalid=I-%1$S asiyodilesi yemeyile esebenzayo kuba asilohlobo lomsebenzisi@kumamkeli. Yilungise kuqala phambi kokuthumela imeyile.
+
+## String used by the dialog that asks the user to attach a web page
+attachPageDlogTitle=Nceda xela indawo yokuqhoboshela
+attachPageDlogMessage=Ikhasi Lothungelwano i-(URL):
+
+## String used for attachment pretty name, when the attachment is a message
+messageAttachmentSafeName=Umyalezo Oqhotyoshelweyo
+
+## String used for attachment pretty name, when the attachment is a message part
+partAttachmentSafeName=Inxalenye Yomyalezo Oqhotyoshelweyo
+
+## String used by the Initialization Error dialog
+initErrorDlogTitle=Kuqanjwa Umyalezo
+initErrorDlgMessage=An error occurred while creating a message compose window. Please try again.
+
+## String used if a file to attach does not exist when passed as
+## a command line argument
+errorFileAttachTitle=File Attach
+
+## LOCALIZATION NOTE (errorFileAttachMessage): %1$S will be replaced by the non-existent file name. Do not translate
+errorFileAttachMessage=The file %1$S does not exist so could not be attached to the message.
+
+## Strings used by the Save as Draft/Template dialog
+SaveDialogTitle=Gcina Umyalezo
+
+## LOCALIZATION NOTE (SaveDialogMsg): %1$S is the folder name, %2$S is the host name
+SaveDialogMsg=Umyalezo wakho ugcinwe kwisiqulathi seefayili ze-%1$S phantsi kwe-%2$S.
+CheckMsg=Musa ukundibonisa le bhokisi yeengxoxo kwakhona.
+
+## Strings used by the prompt when Quitting while in progress
+quitComposeWindowTitle=Kuthunyelwa Umyalezo
+
+## LOCALIZATION NOTE (quitComposeWindowMessage2): don't translate \n
+quitComposeWindowMessage2=%1$S is currently in the process of sending a message.\nWould you like to wait until the message has been sent before quitting or quit now?
+quitComposeWindowQuitButtonLabel2=&Quit
+quitComposeWindowWaitButtonLabel2=&Wait
+quitComposeWindowSaveTitle=Saving Message
+
+## LOCALIZATION NOTE (quitComposeWindowSaveMessage): don't translate \n
+quitComposeWindowSaveMessage=%1$S is currently in the process of saving a message.\nWould you like to wait until the message has been saved before quitting or quit now?
+
+## Strings used by the prompt for Ctrl-Enter check before sending message
+sendMessageCheckWindowTitle=Thumela Umyalezo
+sendMessageCheckLabel=Uqinisekile ukulungele ukuthumela lo myalezo?
+sendMessageCheckSendButtonLabel=Thumela
+assemblingMessageDone=Assembling message…Done
+assemblingMessage=Assembling message…
+smtpDeliveringMail=Delivering mail…
+smtpMailSent=Mail sent successfully
+assemblingMailInformation=Assembling mail information…
+
+## LOCALIZATION NOTE (gatheringAttachment): argument %S is the file name/URI of attachment
+gatheringAttachment=Attaching %S…
+creatingMailMessage=Creating mail message…
+
+## LOCALIZATION NOTE (copyMessageStart): argument %S is the folder name
+copyMessageStart=Copying message to %S folder…
+copyMessageComplete=Copy complete.
+copyMessageFailed=Copy failed.
+filterMessageComplete=Filter complete.
+filterMessageFailed=Filter failed.
+
+## LOCALIZATION NOTE (largeMessageSendWarning):
+## Do not translate %S. It is the size of the message in user-friendly notation.
+largeMessageSendWarning=Warning! You are about to send a message of size %S. Are you sure you want to do this?
+sendingMessage=Sending message…
+sendMessageErrorTitle=Send Message Error
+postingMessage=Posting message…
+sendLaterErrorTitle=Send Later Error
+saveDraftErrorTitle=Save Draft Error
+saveTemplateErrorTitle=Save Template Error
+
+## LOCALIZATION NOTE (failureOnObjectEmbeddingWhileSaving): argument %.200S is the file name/URI of object to be embedded
+failureOnObjectEmbeddingWhileSaving=There was a problem including the file %.200S in the message. Would you like to continue saving the message without this file?
+
+## LOCALIZATION NOTE (failureOnObjectEmbeddingWhileSending): argument %.200S is the file name/URI of object to be embedded
+failureOnObjectEmbeddingWhileSending=There was a problem including the file %.200S in the message. Would you like to continue sending the message without this file?
+returnToComposeWindowQuestion=Would you like to return to the compose window?
+
+## reply header in composeMsg
+## LOCALIZATION NOTE (mailnews.reply_header_authorwrotesingle): #1 is the author (name of the person replying to)
+mailnews.reply_header_authorwrotesingle=#1 wrote:
+
+## LOCALIZATION NOTE (mailnews.reply_header_ondateauthorwrote): #1 is the author, #2 is the date, #3 is the time
+mailnews.reply_header_ondateauthorwrote=On #2 #3, #1 wrote:
+
+## LOCALIZATION NOTE (mailnews.reply_header_authorwroteondate): #1 is the author, #2 is the date, #3 is the time
+mailnews.reply_header_authorwroteondate=#1 wrote on #2 #3:
+
+## reply header in composeMsg
+## user specified
+mailnews.reply_header_originalmessage=-------- Umyalezo Wakuqala --------
+
+## forwarded header in composeMsg
+## user specified
+mailnews.forward_header_originalmessage=-------- Forwarded Message --------
+
+## Strings used by the rename attachment dialog
+renameAttachmentTitle=Rename Attachment
+renameAttachmentMessage=New attachment name:
+
+## Attachment Reminder
+## LOCALIZATION NOTE (mail.compose.attachment_reminder_keywords): comma separated
+## words that should trigger an attachment reminder.
+mail.compose.attachment_reminder_keywords=.doc,.pdf,.xls,.ppt,.rtf,.pps,attachment,attach,attached,attaching,enclosed,CV,cover letter
+
+addAttachmentButton=Add Attachment…
+addAttachmentButton.accesskey=A
+remindLaterButton=Remind Me Later
+remindLaterButton.accesskey=L
+
+attachmentReminderTitle=Attachment Reminder
+attachmentReminderMsg=Did you forget to add an attachment?
+
+# LOCALIZATION NOTE (attachmentReminderKeywordsMsgs): Semi-colon list of plural forms.
+# See: http://developer.mozilla.org/en/Localization_and_Plurals
+# #1 number of keywords
+attachmentReminderKeywordsMsgs=Found an attachment keyword:;Found #1 attachment keywords:
+attachmentReminderOptionsMsg=Attachment reminder words can be configured in your preferences
+attachmentReminderYesIForgot=Oh, I did!
+attachmentReminderFalseAlarm=No, Send Now
+
+# Strings used by the Filelink offer notification bar.
+learnMore.label=Learn More…
+learnMore.accesskey=m
+
+# LOCALIZATION NOTE (bigFileDescription): Semi-colon list of plural forms.
+# See: http://developer.mozilla.org/en/Localization_and_Plurals
+# #1 number of big attached files
+bigFileDescription=This is a large file. It might be better to use Filelink instead.;These are large files. It might be better to use Filelink instead.
+bigFileShare.label=Link
+bigFileShare.accesskey=l
+bigFileAttach.label=Ignore
+bigFileAttach.accesskey=i
+bigFileChooseAccount.title=Choose Account
+bigFileChooseAccount.text=Choose a cloud account to upload the attachment to
+bigFileHideNotification.title=Don't Upload My Files
+bigFileHideNotification.text=You won't be notified if you attach more big files to this message.
+bigFileHideNotification.check=Never notify me of this again.
+
+# LOCALIZATION NOTE(cloudFileUploadingTooltip): Do not translate the string
+# %S. %S is the display name for the cloud account the attachment is being
+# uploaded to.
+cloudFileUploadingTooltip=Uploading to %S…
+
+# LOCALIZATION NOTE(cloudFileUploadedTooltip): Do not translate the string
+# %S. %S is the display name for the cloud account the attachment was uploaded
+# to.
+cloudFileUploadedTooltip=Uploaded to %S
+cloudFileUploadingNotification=Your file is being linked. It will appear in the body of the message when it's done.;Your files are being linked. They will appear in the body of the message when it's done.
+cloudFileUploadingCancel.label=Cancel
+cloudFileUploadingCancel.accesskey=c
+cloudFilePrivacyNotification=Linking is complete. Please note that linked attachments may be accessible to people who can see or guess the links.
+
+## LOCALIZATION NOTE(smtpEnterPasswordPrompt): Do not translate the
+## word %S. Place the word %S where the host name should appear.
+smtpEnterPasswordPrompt=Enter your password for %S:
+
+## LOCALIZATION NOTE(smtpEnterPasswordPromptWithUsername): Do not translate the
+## words %1$S and %2$S. Place the word %1$S where the host name should appear,
+## and %2$S where the user name should appear.
+smtpEnterPasswordPromptWithUsername=Enter your password for %2$S on %1$S:
+
+# LOCALIZATION NOTE (removeAttachmentMsgs): Semi-colon list of plural forms.
+# See: http://developer.mozilla.org/en/Localization_and_Plurals
+removeAttachmentMsgs=Remove Attachment;Remove Attachments
+
+errorFilteringMsg=Your message has been sent and saved, but there was an error while running message filters on it.
+errorCloudFileAuth.title=Authentication Error
+
+## LOCALIZATION NOTE(errorCloudFileAuth.message):
+## %1$S is the name of the online storage service against which the authentication failed.
+errorCloudFileAuth.message=Unable to authenticate to %1$S.
+errorCloudFileUpload.title=Upload Error
+
+## LOCALIZATION NOTE(errorCloudFileUpload.message):
+## %1$S is the name of the online storage service against which the uploading failed.
+## %2$S is the name of the file that failed to upload.
+errorCloudFileUpload.message=Unable to upload %2$S to %1$S.
+errorCloudFileQuota.title=Quota Error
+
+## LOCALIZATION NOTE(errorCloudFileQuota.message):
+## %1$S is the name of the online storage service being uploaded to.
+## %2$S is the name of the file that could not be uploaded due to exceeding the storage limit.
+errorCloudFileQuota.message=Uploading %2$S to %1$S would exceed your space quota.
+errorCloudFileNameLimit.title=File Name Error
+
+## LOCALIZATION NOTE(errorCloudFileNameLimit.message):
+## %1$S is the name of the online storage service being uploaded to.
+## %2$S is the name of the file that could not be uploaded due to the excess file name length
+errorCloudFileNameLimit.message=%2$S contains has more than 120 characters in its name which is more than the maximum file name length for %1$S. Please rename the file to have 120 characters or less in its name and upload again.
+errorCloudFileLimit.title=File Size Error
+
+## LOCALIZATION NOTE(errorCloudFileLimit.message):
+## %1$S is the name of the online storage service being uploaded to.
+## %2$S is the name of the file that could not be uploaded due to size restrictions.
+errorCloudFileLimit.message=%2$S exceeds the maximum size for %1$S.
+errorCloudFileOther.title=Unknown Error
+
+## LOCALIZATION NOTE(errorCloudFileOther.message):
+## %1$S is the name of the online storage service that cannot be communicated with.
+errorCloudFileOther.message=An unknown error occurred when communicating with %1$S.
+errorCloudFileDeletion.title=Deletion Error
+
+## LOCALIZATION NOTE(errorCloudFileDeletion.message):
+## %1$S is the name of the online storage service that the file is to be deleted from.
+## %2$S is the name of the file that failed to be deleted.
+errorCloudFileDeletion.message=There was a problem deleting %2$S from %1$S.
+errorCloudFileUpgrade.label=Upgrade
+
+## LOCALIZATION NOTE(cloudAttachmentCountHeader): A line of text describing how
+## many uploaded files have been appended to this message.  Emphasis should be
+## on sharing as opposed to attaching. This item is used as a header to a list,
+## hence the colon.  This header is only displayed in HTML emails.
+## Using PluralForm (so don't replace the #1).
+cloudAttachmentCountHeader=I've linked #1 file to this email:;I've linked #1 files to this email:
+
+## LOCALIZATION NOTE(cloudAttachmentListFooter): %1$S is a link, whose text
+## contents are the brandFullName of this application.
+cloudAttachmentListFooter=%1$S makes it easy to share large files over email.
+
+## LOCALIZATION NOTE(cloudAttachmentListItem): A line of text describing a cloud
+## attachment to be inserted into the message body. Do not translate the words
+## %1$S, %2$S, %3$S, or %4$S. %1$S is the attachment name, %2$S is its size,
+## %3$S is the name of the cloud storage service, and %4$S is the link to the
+## attachment.
+cloudAttachmentListItem=* %1$S (%2$S) hosted on %3$S: %4$S
+
+## LOCALIZATION NOTE(stopShowingUploadingNotification): This string is used in the Filelink
+## upload notification bar to allow the user to dismiss the notification permanently.
+stopShowingUploadingNotification.accesskey=N
+stopShowingUploadingNotification.label=Never show this again
+replaceButton.label=Replace…
+replaceButton.accesskey=l
+replaceButton.tooltip=Show the Find and Replace dialog
+