diff options
Diffstat (limited to '')
| -rw-r--r-- | l10n-en-GB/suite/chrome/mailnews/compose/composeMsgs.properties | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/l10n-en-GB/suite/chrome/mailnews/compose/composeMsgs.properties b/l10n-en-GB/suite/chrome/mailnews/compose/composeMsgs.properties new file mode 100644 index 0000000000..b0fe3e9198 --- /dev/null +++ b/l10n-en-GB/suite/chrome/mailnews/compose/composeMsgs.properties @@ -0,0 +1,302 @@ +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + +# +# The following are used by the compose back end +# +## LOCALIZATION NOTE (unableToOpenFile, unableToOpenTmpFile): +## %S will be replaced with the name of file that could not be opened +unableToOpenFile=Unable to open the file %S. +unableToOpenTmpFile=Unable to open the temporary file %S. Check your 'Temporary Directory' setting. +unableToSaveTemplate=Unable to save your message as a template. +unableToSaveDraft=Unable to save your message as a draft. +couldntOpenFccFolder=Couldn't open the Sent mail folder. Please verify that your Mail preferences are correct. +noSender=No sender was specified. Please add your email address in the Mail & Newsgroups account settings. +noRecipients=No recipients were specified. Please enter a recipient or newsgroup in the addressing area. +errorWritingFile=Error writing temporary file. + +## LOCALIZATION NOTE (errorSendingFromCommand): argument %s is the Outgoing server (SMTP) response +errorSendingFromCommand=An error occurred while sending mail. The mail server responded: %s. Please verify that your email address is correct in your Mail preferences and try again. + +## LOCALIZATION NOTE (errorSendingDataCommand): argument %s is the Outgoing server (SMTP) response +errorSendingDataCommand=An Outgoing server (SMTP) error occurred while sending mail. The server responded: %s. + +## LOCALIZATION NOTE (errorSendingMessage): argument %s is the Outgoing server (SMTP) response +errorSendingMessage=An error occurred while sending mail. The mail server responded: %s. Please check the message and try again. +postFailed=The message could not be posted because connecting to the news server failed. The server may be unavailable or is refusing connections. Please verify that your news server settings are correct and try again. +errorQueuedDeliveryFailed=An error occurred while delivering unsent messages. +sendFailed=Sending of the message failed. + +## LOCALIZATION NOTE (sendFailedUnexpected): argument %X is a hex error code value +sendFailedUnexpected=Failed due to unexpected error %X. No description is available. + +## LOCALIZATION NOTE (smtpSecurityIssue): argument %S is the Outgoing smtp server name +smtpSecurityIssue=The configuration related to %S must be corrected. + +## LOCALIZATION NOTE (smtpServerError): argument %s is the Outgoing server (SMTP) response +smtpServerError=An error occurred while sending mail: Outgoing server (SMTP) error. The server responded: %s\n. +unableToSendLater=Sorry, we were unable to save your message for sending later. + +## LOCALIZATION NOTE (communicationsError): argument %d is the error code +communicationsError=A communications error occurred: %d. Please try again. +dontShowAlert=THIS IS JUST A PLACEHOLDER. YOU SHOULD NEVER SEE THIS STRING. + +couldNotGetUsersMailAddress2=An error occurred while sending mail: the sender's address (From:) was invalid. Please verify that this email address is correct and try again. +couldNotGetSendersIdentity=An error occurred while sending mail: the sender identity was invalid. Please verify the configuration of your identity and try again. +mimeMpartAttachmentError=Attachment error. +failedCopyOperation=The message was sent successfully, but could not be copied to your Sent folder. +nntpNoCrossPosting=You can only send a message to one news server at a time. +msgCancelling=Cancelling… +sendFailedButNntpOk=Your message has been posted to the newsgroup but has not been sent to the other recipient. +errorReadingFile=Error reading file. +followupToSenderMessage=The author of this message has requested that responses be sent only to the author. If you also want to reply to the newsgroup, add a new row to the addressing area, choose Newsgroup from the recipients list, and enter the name of the newsgroup. + +## LOCALIZATION NOTE (errorAttachingFile): argument %S is the file name/URI of object to be attached +errorAttachingFile=There was an error attaching %S. Please check that you have access to the file. + +## LOCALIZATION NOTE (incorrectSmtpGreeting): argument %s is the Outgoing server (SMTP) greeting +incorrectSmtpGreeting=An error occurred while sending mail: The mail server sent an incorrect greeting: %s. + +## LOCALIZATION NOTE (errorSendingRcptCommand): argument %1$S is the Outgoing server (SMTP) response, argument %2$S is the intended message recipient. +errorSendingRcptCommand=An error occurred while sending mail. The mail server responded: \n%1$S.\n Please check the message recipient "%2$S" and try again. + +## LOCALIZATION NOTE (startTlsFailed): argument %S is the Outgoing server (SMTP) +startTlsFailed=An error occurred while sending mail: Unable to establish a secure link with Outgoing server (SMTP) %S using STARTTLS since it doesn't advertise that feature. Switch off STARTTLS for this server or contact your service provider. + +## LOCALIZATION NOTE (smtpPasswordUndefined): argument %S is the Outgoing server (SMTP) account +smtpPasswordUndefined=An error occurred while sending mail: Could not get password for %S. The message was not sent. + +## LOCALIZATION NOTE (smtpSendNotAllowed): argument %s is the Outgoing server (SMTP) response +smtpSendNotAllowed=An error occurred while sending mail. The mail server responded:\n%s.\nPlease ensure that you are using the correct identity to send and that the used authentication method is correct. Verify that you are allowed to send via this SMTP server with your current credentials from your current network. + +## LOCALIZATION NOTE (smtpTempSizeExceeded): argument %s is the Outgoing server (SMTP) response +smtpTempSizeExceeded=The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: %s. + +## LOCALIZATION NOTE (smtpClientid): argument %s is the Outgoing server (SMTP) response +smtpClientid=The outgoing server (SMTP) detected an error in the CLIENTID command. The message was not sent. The server responded: %s + +## LOCALIZATION NOTE (smtpClientidPermission): argument %s is the Outgoing server (SMTP) response +smtpClientidPermission=The outgoing server (SMTP) response to the CLIENTID command indicates that your device is not permitted to send mail. The server responded: %s + +## LOCALIZATION NOTE (smtpPermSizeExceeded1): argument %d is the Outgoing server (SMTP) size limit +smtpPermSizeExceeded1=The size of the message you are trying to send exceeds the global size limit (%d bytes) of the server. The message was not sent; reduce the message size and try again. + +## LOCALIZATION NOTE (smtpPermSizeExceeded2): argument %s is the server's response +smtpPermSizeExceeded2=The size of the message you are trying to send exceeds the global size limit of the server. The message was not sent; reduce the message size and try again. The server responded: %s. + +## LOCALIZATION NOTE (smtpSendFailedUnknownServer): argument %S is the Outgoing server (SMTP) +smtpSendFailedUnknownServer=An error occurred while sending mail: Outgoing server (SMTP) %S is unknown. The server may be incorrectly configured. Please verify that your Outgoing server (SMTP) settings are correct and try again. + +## LOCALIZATION NOTE (smtpSendRequestRefused): argument %S is the Outgoing server (SMTP) +smtpSendRequestRefused=The message could not be sent because connecting to Outgoing server (SMTP) %S failed. The server may be unavailable or is refusing SMTP connections. Please verify that your Outgoing server (SMTP) settings are correct and try again. + +## LOCALIZATION NOTE (smtpSendInterrupted): argument %S is the Outgoing server (SMTP) +smtpSendInterrupted=The message could not be sent because the connection to Outgoing server (SMTP) %S was lost in the middle of the transaction. Try again. + +## LOCALIZATION NOTE (smtpSendTimeout): argument %S is the Outgoing server (SMTP) +smtpSendTimeout=The message could not be sent because the connection to Outgoing server (SMTP) %S timed out. Try again. + +## LOCALIZATION NOTE (smtpSendFailedUnknownReason): argument %S is the Outgoing server (SMTP) +smtpSendFailedUnknownReason=The message could not be sent using Outgoing server (SMTP) %S for an unknown reason. Please verify that your Outgoing server (SMTP) settings are correct and try again. + +# LOCALIZATION NOTE (smtpHintAuthEncryptToPlainNoSsl): %S is the server hostname +smtpHintAuthEncryptToPlainNoSsl=The Outgoing server (SMTP) %S does not seem to support encrypted passwords. If you just set up the account, try changing the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)' to 'Password, transmitted insecurely'. If it used to work but now doesn't, you may be susceptible to getting your password stolen. + +# LOCALIZATION NOTE (smtpHintAuthEncryptToPlainSsl): %S is the server hostname +smtpHintAuthEncryptToPlainSsl=The Outgoing server (SMTP) %S does not seem to support encrypted passwords. If you just set up the account, try changing the 'Authentication method' in 'Account settings | Outgoing server (SMTP)' to 'Normal password'. + +# LOCALIZATION NOTE (smtpHintAuthPlainToEncrypt): %S is the server hostname +smtpHintAuthPlainToEncrypt=The Outgoing server (SMTP) %S does not allow plaintext passwords. Please try changing the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)' to 'Encrypted password'. + +# LOCALIZATION NOTE (smtpAuthFailure): %S is the server hostname +smtpAuthFailure=Unable to authenticate to Outgoing server (SMTP) %S. Please check the password, and verify the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)'. + +# LOCALIZATION NOTE (smtpAuthGssapi): %S is the server hostname +smtpAuthGssapi=The Kerberos/GSSAPI ticket was not accepted by the Outgoing server (SMTP) %S. Please check that you are logged in to the Kerberos/GSSAPI realm. + +# LOCALIZATION NOTE (smtpAuthMechNotSupported): %S is the server hostname +smtpAuthMechNotSupported=The Outgoing server (SMTP) %S does not support the selected authentication method. Please change the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)'. + +# LOCALIZATION NOTE (errorIllegalLocalPart): %s is an email address with an illegal localpart +errorIllegalLocalPart=There are non-ASCII characters in the local part of the recipient address %s. This is not yet supported. Please change this address and try again. + +# LOCALIZATION NOTE (errorIllegalLocalPart2): %s is an email address with an illegal localpart +errorIllegalLocalPart2=There are non-ASCII characters in the local part of the recipient address %s and your server does not support SMTPUTF8. Please change this address and try again. + +## Strings used for the save message dialog shown when the user closes a message compose window +saveDlogTitle=Save Message + +## LOCALIZATION NOTE (saveDlogMessages3): Do not translate the words %1$S and \n. +## %1$S is replaced by the folder name configured for saving drafts (typically the "Drafts" folder). +## Translate "Compose" to match the translation of item "windowTitlePrefix" below. +saveDlogMessages3=Save this message to your drafts folder (%1$S) and close the Compose window? +discardButtonLabel=&Discard changes + +## generics string +defaultSubject=(no subject) +chooseFileToAttach=Attach File(s) + +## +windowTitlePrefix=Compose: + +## String used by the dialog that asks the user to enter a subject +sendMsgTitle=Send Message +subjectDlogMessage=You did not specify a subject for this message. If you would like to provide one, please type it now. + +## String used by the dialog that informs the user about the newsgroup recipient +recipientDlogMessage=This account only supports email recipients. Continuing will ignore newsgroups. + +## String used by the alert that tells the user an e-mail address is invalid +## LOCALIZATION NOTE (addressInvalid): %1$S is the email address +addressInvalid=%1$S is not a valid email address because it is not of the form user@host. You must correct it before sending the email. +genericFailureExplanation=Please verify that your Mail & Newsgroups account settings are correct and try again. + +## LOCALIZATION NOTE (undisclosedRecipients): this string must use only US_ASCII characters +undisclosedRecipients=undisclosed-recipients + +## String used for attachment pretty name, when the attachment is a message +messageAttachmentSafeName=Attached Message +## String used for attachment pretty name, when the attachment is a message part +partAttachmentSafeName=Attached Message Part + +## String used by the Initialization Error dialog +initErrorDlogTitle=Message Compose +initErrorDlgMessage=An error occurred while creating a message compose window. Please try again. + +## String used if the file to attach does not exist when passed as +## a command line argument +errorFileAttachTitle=File Attach + +## LOCALIZATION NOTE (errorFileAttachMessage): %1$S will be replaced by the non-existent file name. Do not translate +errorFileAttachMessage=The file %1$S does not exist so could not be attached to the message. + +## Strings used by the Save as Draft/Template dialog +SaveDialogTitle=Save Message + +## LOCALIZATION NOTE (SaveDialogMsg): %1$S is the folder name, %2$S is the host name +SaveDialogMsg=Your message has been saved to the folder %1$S under %2$S. +CheckMsg=Do not show me this dialogue box again. + +## Strings used by the prompt when Quitting while in progress +quitComposeWindowTitle=Sending Message + +## LOCALIZATION NOTE (quitComposeWindowMessage): don't translate \n +quitComposeWindowMessage2=%1$S is currently in the process of sending a message.\nWould you like to wait until the message has been sent before quitting or quit now? +quitComposeWindowQuitButtonLabel2=&Quit +quitComposeWindowWaitButtonLabel2=&Wait + +## Strings used by the prompt for Ctrl-Enter check before sending message +sendMessageCheckWindowTitle=Send Message +sendMessageCheckLabel=Are you sure you are ready to send this message? +sendMessageCheckSendButtonLabel=Send +assemblingMessageDone=Assembling message…Done +assemblingMessage=Assembling message… +smtpDeliveringMail=Delivering mail… +smtpMailSent=Mail sent successfully +assemblingMailInformation=Assembling mail information… + +## LOCALIZATION NOTE (gatheringAttachment): argument %S is the file name/URI of attachment +gatheringAttachment=Attaching %S… +creatingMailMessage=Creating mail message… + +## LOCALIZATION NOTE (copyMessageStart): argument %S is the folder name +copyMessageStart=Copying message to %S folder… +copyMessageComplete=Copy complete. +copyMessageFailed=Copy failed. +filterMessageComplete=Filter complete. +filterMessageFailed=Filter failed. + +## LOCALIZATION NOTE (largeMessageSendWarning): +## %S is the message size in user-friendly notation. Do not translate. +largeMessageSendWarning=Warning! You are about to send a message of size %S which may exceed the allowed limit on the mail server. Are you sure that you want to do this? +sendingMessage=Sending message… +sendMessageErrorTitle=Send Message Error +postingMessage=Posting message… +sendLaterErrorTitle=Send Later Error +saveDraftErrorTitle=Save Draft Error +saveTemplateErrorTitle=Save Template Error + +## LOCALIZATION NOTE (failureOnObjectEmbeddingWhileSaving): argument %.200S is the file name/URI of object to be embedded +failureOnObjectEmbeddingWhileSaving=There was a problem including the file %.200S in the message. Would you like to continue saving the message without this file? + +## LOCALIZATION NOTE (failureOnObjectEmbeddingWhileSending): argument %.200S is the file name/URI of object to be embedded +failureOnObjectEmbeddingWhileSending=There was a problem including the file %.200S in the message. Would you like to continue sending the message without this file? +returnToComposeWindowQuestion=Would you like to return to the compose window? + +## reply header in composeMsg +## LOCALIZATION NOTE (mailnews.reply_header_authorwrotesingle): #1 is the author (name of person replying to) +mailnews.reply_header_authorwrotesingle=#1 wrote: + +## LOCALIZATION NOTE (mailnews.reply_header_ondateauthorwrote): #1 is the author, #2 is the date, #3 is the time +mailnews.reply_header_ondateauthorwrote=On #2 #3, #1 wrote: + +## LOCALIZATION NOTE (mailnews.reply_header_authorwroteondate): #1 is the author, #2 is the date, #3 is the time +mailnews.reply_header_authorwroteondate=#1 wrote on #2 #3: + +## reply header in composeMsg +## user specified +mailnews.reply_header_originalmessage=-------- Original Message -------- + +## forwarded header in composeMsg +## user specified +mailnews.forward_header_originalmessage=-------- Forwarded Message -------- + +## Strings used by the rename attachment dialog +renameAttachmentTitle=Rename Attachment +renameAttachmentMessage=New attachment name: + +## LOCALIZATION NOTE(smtpEnterPasswordPrompt): Do not translate the +## word %S. Place the word %S where the host name should appear. +smtpEnterPasswordPrompt=Enter your password for %S: + +## LOCALIZATION NOTE(smtpEnterPasswordPromptWithUsername): Do not translate the +## words %1$S and %2$S. Place the word %1$S where the host name should appear, +## and %2$S where the user name should appear. +smtpEnterPasswordPromptWithUsername=Enter your password for %2$S on %1$S: +## LOCALIZATION NOTE(smtpEnterPasswordPromptTitleWithHostname): Do not translate the +## word %1$S. Place the word %1$S where the server host name should appear. +smtpEnterPasswordPromptTitleWithHostname=Password Required for Outgoing (SMTP) Server %1$S + +## LOCALIZATION NOTE(promptToSaveSentLocally2): Do not translate the strings %1$S, %2$S, %3$S and \n. +## %2$S will be replaced with the account name. $1$S will be replaced by the folder name +## configured to contain saved sent messages (typically the "Sent" folder). +## %3$S will be replaced with the local folders account name (typically "Local Folders"). +promptToSaveSentLocally2=Your message was sent but a copy was not placed in your sent folder (%1$S) due to network or file access errors.\nYou can retry or save the message locally to %3$S/%1$S-%2$S. +errorFilteringMsg=Your message has been sent and saved, but there was an error while running message filters on it. + +## LOCALIZATION NOTE(promptToSaveDraftLocally2): Do not translate the strings %1$S, %2$S, %3$S and \n. +## %2$S will be replaced with the account name. $1$S will be replaced by the folder name +## configured to contain saved draft messages (typically the "Drafts" folder). +## %3$S will be replaced with the local folders account name (typically "Local Folders"). +promptToSaveDraftLocally2=Your draft message was not copied to your drafts folder (%1$S) due to network or file access errors.\nYou can retry or save the draft locally to %3$S/%1$S-%2$S. +buttonLabelRetry2=&Retry + +## LOCALIZATION NOTE(promptToSaveTemplateLocally2): Do not translate the strings %1$S, %2$S, %3$S and \n. +## %2$S will be replaced with the account name. $1$S will be replaced by the folder name +## configured to contain saved templates (typically the "Templates" folder). +## %3$S will be replaced with the local folders account name (typically "Local Folders"). +promptToSaveTemplateLocally2=Your template was not copied to your templates folder (%1$S) due to network or file access errors.\nYou can retry or save the template locally to %3$S/%1$S-%2$S. + +## LOCALIZATION NOTE(saveToLocalFoldersFailed): Message appears after normal +## save fails (e.g., to Sent) and save to Local Folders also fails. This could +## occur if network is down and filesystem problems are present such as disk +## full, permission issues or hardware failure. +saveToLocalFoldersFailed=Unable to save your message to local folders. Possibly out of file storage space. + +## LOCALIZATION NOTE(blockedAllowResource): %S is the URL to load. +blockedAllowResource=Unblock %S +## LOCALIZATION NOTE (blockedContentMessage): Semi-colon list of plural forms. +## See: http://developer.mozilla.org/en/docs/Localization_and_Plurals +## %S will be replaced by brandShortName. +## Files must be unblocked individually, therefore the plural form reads: +## Unblocking a file (one of several) will include it (that one file) in your sent message. +## In other words: +## Unblocking one/several file(s) will include it/them in your message. +blockedContentMessage=%S has blocked a file from loading into this message. Unblocking the file will include it in your sent message.;%S has blocked some files from loading into this message. Unblocking a file will include it in your sent message. + +## LOCALIZATION NOTE (blockedContentPrefLabel, blockedContentPrefAccesskey): +## Same content as (blockedContentPrefLabel, blockedContentPrefAccesskey) +## in mail directory. SeaMonkey does only use Options and not Preferences. +blockedContentPrefLabel=Options +blockedContentPrefAccesskey=O |