diff options
Diffstat (limited to 'l10n-xh/mail/installer')
| -rw-r--r-- | l10n-xh/mail/installer/custom.properties | 86 | ||||
| -rw-r--r-- | l10n-xh/mail/installer/mui.properties | 102 | ||||
| -rw-r--r-- | l10n-xh/mail/installer/override.properties | 128 |
3 files changed, 316 insertions, 0 deletions
diff --git a/l10n-xh/mail/installer/custom.properties b/l10n-xh/mail/installer/custom.properties new file mode 100644 index 0000000000..40c8e03b64 --- /dev/null +++ b/l10n-xh/mail/installer/custom.properties @@ -0,0 +1,86 @@ +# ***** BEGIN LICENSE BLOCK ***** +# Version: MPL 1.1/GPL 2.0/LGPL 2.1 +# +# The contents of this file are subject to the Mozilla Public License Version +# 1.1 (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# http://www.mozilla.org/MPL/ +# +# Software distributed under the License is distributed on an "AS IS" basis, +# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License +# for the specific language governing rights and limitations under the +# License. +# +# The Original Code is the Mozilla Installer code. +# +# The Initial Developer of the Original Code is Mozilla Foundation +# Portions created by the Initial Developer are Copyright (C) 2006 +# the Initial Developer. All Rights Reserved. +# +# Contributor(s): +# Robert Strong <robert.bugzilla@gmail.com> +# +# Alternatively, the contents of this file may be used under the terms of +# either the GNU General Public License Version 2 or later (the "GPL"), or +# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), +# in which case the provisions of the GPL or the LGPL are applicable instead +# of those above. If you wish to allow use of your version of this file only +# under the terms of either the GPL or the LGPL, and not to allow others to +# use your version of this file under the terms of the MPL, indicate your +# decision by deleting the provisions above and replace them with the notice +# and other provisions required by the GPL or the LGPL. If you do not delete +# the provisions above, a recipient may use your version of this file under +# the terms of any one of the MPL, the GPL or the LGPL. +# +# ***** END LICENSE BLOCK ***** + +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + +# LOCALIZATION NOTE: + +# This file must be saved as UTF8 + +# Accesskeys are defined by prefixing the letter that is to be used for the +# accesskey with an ampersand (e.g. &). + +# Don't replace ${BrandShortName}, $(^Name), or $(^NameDA) with a custom string. + +# Do not replace $BrandShortName, $BrandFullName, or $BrandFullNameDA with a +# custom string and always use the same one as used by the en-US files. +# $BrandFullNameDA allows the string to contain an ampersand (e.g. DA stands +# for double ampersand) and prevents the letter following the ampersand from +# being used as an accesskey. + +# You can use \n to create a newline in the string but only when the string +# from en-US contains a \n. + +OPTIONS_PAGE_TITLE=Setup Type +OPTIONS_PAGE_SUBTITLE=Choose setup options +SHORTCUTS_PAGE_TITLE=Set Up Shortcuts +SHORTCUTS_PAGE_SUBTITLE=Create Program Icons +SURVEY_TEXT=&Tell us what you thought of ${BrandShortName} +LAUNCH_TEXT=&Launch $(^Name) now +CREATE_ICONS_DESC=Create icons for ${BrandShortName}: +ICONS_DESKTOP=On my &Desktop +ICONS_STARTMENU=In my &Start Menu Programs folder +ICONS_QUICKLAUNCH=In my &Quick Launch bar +WARN_WRITE_ACCESS=You don't have access to write to the installation directory.\n\nClick OK to select a different directory. +WARN_DISK_SPACE=You don't have sufficient disk space to install to this location.\n\nClick OK to select a different location. + +STATUS_INSTALL_APP=Installing ${BrandShortName}... +STATUS_INSTALL_LANG=Installing Language Files (${AB_CD})... +STATUS_UNINSTALL_MAIN=Uninstalling ${BrandShortName}... +STATUS_CLEANUP=Cleaning up the birdcage... + +# _DESC strings support approximately 65 characters per line. +# One line +OPTIONS_SUMMARY=Choose the type of setup you prefer, then click Next. +# One line +OPTION_STANDARD_DESC=${BrandShortName} will be installed with the most common options. +OPTION_STANDARD_RADIO=&Standard +# Two lines +OPTION_CUSTOM_DESC=You may choose individual options to be installed. Recommended for experienced users. +OPTION_CUSTOM_RADIO=&Custom + diff --git a/l10n-xh/mail/installer/mui.properties b/l10n-xh/mail/installer/mui.properties new file mode 100644 index 0000000000..da5e26cdab --- /dev/null +++ b/l10n-xh/mail/installer/mui.properties @@ -0,0 +1,102 @@ +# ***** BEGIN LICENSE BLOCK ***** +# Version: MPL 1.1/GPL 2.0/LGPL 2.1 +# +# The contents of this file are subject to the Mozilla Public License Version +# 1.1 (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# http://www.mozilla.org/MPL/ +# +# Software distributed under the License is distributed on an "AS IS" basis, +# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License +# for the specific language governing rights and limitations under the +# License. +# +# The Original Code is the Mozilla Installer code. +# +# The Initial Developer of the Original Code is Mozilla Foundation +# Portions created by the Initial Developer are Copyright (C) 2006 +# the Initial Developer. All Rights Reserved. +# +# Contributor(s): +# Robert Strong <robert.bugzilla@gmail.com> +# +# Alternatively, the contents of this file may be used under the terms of +# either the GNU General Public License Version 2 or later (the "GPL"), or +# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), +# in which case the provisions of the GPL or the LGPL are applicable instead +# of those above. If you wish to allow use of your version of this file only +# under the terms of either the GPL or the LGPL, and not to allow others to +# use your version of this file under the terms of the MPL, indicate your +# decision by deleting the provisions above and replace them with the notice +# and other provisions required by the GPL or the LGPL. If you do not delete +# the provisions above, a recipient may use your version of this file under +# the terms of any one of the MPL, the GPL or the LGPL. +# +# ***** END LICENSE BLOCK ***** + +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + +# To make the l10n tinderboxen see changes to this file you can change a value +# name by adding - to the end of the name followed by chars (e.g. Branding-2). + +# LOCALIZATION NOTE: + +# This file must be saved as UTF8 + +# Accesskeys are defined by prefixing the letter that is to be used for the +# accesskey with an ampersand (e.g. &). + +# Do not replace $(^NameDA) or $(^Name) with a custom string. + +# Do not change $(^NameDA) to $(^Name) or $(^Name) to $(^NameDA). NameDA allows +# Name to contain an ampersand (e.g. DA stands for double ampersand) and +# prevents the letter following the ampersand being used as an accesskey. + +# Do not replace $BrandShortName, $BrandFullName, or $BrandFullNameDA with a +# custom string and always use the same one as used by the en-US files. +# $BrandFullNameDA allows the string to contain an ampersand (e.g. DA stands +# for double ampersand) and prevents the letter following the ampersand from +# being used as an accesskey. + +# You can use \n to create a newline in the string but only when the string +# from en-US contains a \n. +MUI_TEXT_WELCOME_INFO_TITLE=Welcome to the $(^NameDA) Setup Wizard +MUI_TEXT_WELCOME_INFO_TEXT=This wizard will guide you through the installation of $(^NameDA).\n\nIt is recommended that you close all other applications before starting Setup. This will make it possible to update relevant system files without having to reboot your computer.\n\n$_CLICK +MUI_TEXT_COMPONENTS_TITLE=Choose Components +MUI_TEXT_COMPONENTS_SUBTITLE=Choose which features of $(^NameDA) you want to install. +MUI_INNERTEXT_COMPONENTS_DESCRIPTION_TITLE=Description +MUI_INNERTEXT_COMPONENTS_DESCRIPTION_INFO=Position your mouse over a component to see its description. +MUI_TEXT_DIRECTORY_TITLE=Choose Install Location +MUI_TEXT_DIRECTORY_SUBTITLE=Choose the folder in which to install $(^NameDA). +MUI_TEXT_INSTALLING_TITLE=Installing +MUI_TEXT_INSTALLING_SUBTITLE=Please wait while $(^NameDA) is being installed. +MUI_TEXT_FINISH_TITLE=Installation Complete +MUI_TEXT_FINISH_SUBTITLE=Setup was completed successfully. +MUI_TEXT_ABORT_TITLE=Installation Aborted +MUI_TEXT_ABORT_SUBTITLE=Setup was not completed successfully. +MUI_BUTTONTEXT_FINISH=&Finish +MUI_TEXT_FINISH_INFO_TITLE=Completing the $(^NameDA) Setup Wizard +MUI_TEXT_FINISH_INFO_TEXT=$(^NameDA) has been installed on your computer.\n\nClick Finish to close this wizard. +MUI_TEXT_FINISH_INFO_REBOOT=Your computer must be restarted in order to complete the installation of $(^NameDA). Do you want to reboot now? +MUI_TEXT_FINISH_REBOOTNOW=Reboot now +MUI_TEXT_FINISH_REBOOTLATER=I want to manually reboot later +MUI_TEXT_STARTMENU_TITLE=Choose Start Menu Folder +MUI_TEXT_STARTMENU_SUBTITLE=Choose a Start Menu folder for the $(^NameDA) shortcuts. +MUI_INNERTEXT_STARTMENU_TOP=Select the Start Menu folder in which you would like to create the program's shortcuts. You can also enter a name to create a new folder. +MUI_TEXT_ABORTWARNING=Are you sure you want to quit $(^Name) Setup? +MUI_UNTEXT_WELCOME_INFO_TITLE=Welcome to the $(^NameDA) Uninstall Wizard +MUI_UNTEXT_WELCOME_INFO_TEXT=This wizard will guide you through the uninstallation of $(^NameDA).\n\nBefore starting the uninstallation, make sure $(^NameDA) is not running.\n\n$_CLICK +MUI_UNTEXT_CONFIRM_TITLE=Uninstall $(^NameDA) +MUI_UNTEXT_CONFIRM_SUBTITLE=Remove $(^NameDA) from your computer. +MUI_UNTEXT_UNINSTALLING_TITLE=Uninstalling +MUI_UNTEXT_UNINSTALLING_SUBTITLE=Please wait while $(^NameDA) is being uninstalled. +MUI_UNTEXT_FINISH_TITLE=Uninstallation Complete +MUI_UNTEXT_FINISH_SUBTITLE=Uninstall was completed successfully. +MUI_UNTEXT_ABORT_TITLE=Uninstallation Aborted +MUI_UNTEXT_ABORT_SUBTITLE=Uninstall was not completed successfully. +MUI_UNTEXT_FINISH_INFO_TITLE=Completing the $(^NameDA) Uninstall Wizard +MUI_UNTEXT_FINISH_INFO_TEXT=$(^NameDA) has been uninstalled from your computer.\n\nClick Finish to close this wizard. +MUI_UNTEXT_FINISH_INFO_REBOOT=Your computer must be restarted in order to complete the uninstallation of $(^NameDA). Do you want to reboot now? +MUI_UNTEXT_ABORTWARNING=Are you sure you want to quit $(^Name) Uninstall? diff --git a/l10n-xh/mail/installer/override.properties b/l10n-xh/mail/installer/override.properties new file mode 100644 index 0000000000..161e3e4053 --- /dev/null +++ b/l10n-xh/mail/installer/override.properties @@ -0,0 +1,128 @@ +# ***** BEGIN LICENSE BLOCK ***** +# Version: MPL 1.1/GPL 2.0/LGPL 2.1 +# +# The contents of this file are subject to the Mozilla Public License Version +# 1.1 (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# http://www.mozilla.org/MPL/ +# +# Software distributed under the License is distributed on an "AS IS" basis, +# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License +# for the specific language governing rights and limitations under the +# License. +# +# The Original Code is the Mozilla Installer code. +# +# The Initial Developer of the Original Code is Mozilla Foundation +# Portions created by the Initial Developer are Copyright (C) 2006 +# the Initial Developer. All Rights Reserved. +# +# Contributor(s): +# Robert Strong <robert.bugzilla@gmail.com> +# +# Alternatively, the contents of this file may be used under the terms of +# either the GNU General Public License Version 2 or later (the "GPL"), or +# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), +# in which case the provisions of the GPL or the LGPL are applicable instead +# of those above. If you wish to allow use of your version of this file only +# under the terms of either the GPL or the LGPL, and not to allow others to +# use your version of this file under the terms of the MPL, indicate your +# decision by deleting the provisions above and replace them with the notice +# and other provisions required by the GPL or the LGPL. If you do not delete +# the provisions above, a recipient may use your version of this file under +# the terms of any one of the MPL, the GPL or the LGPL. +# +# ***** END LICENSE BLOCK ***** + +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + +# LOCALIZATION NOTE: + +# This file must be saved as UTF8 + +# Accesskeys are defined by prefixing the letter that is to be used for the +# accesskey with an ampersand (e.g. &). + +# Do not replace $(^NameDA) or $(^Name) with a custom string. + +# Do not change $(^NameDA) to $(^Name) or $(^Name) to $(^NameDA). NameDA allows +# Name to contain an ampersand (e.g. DA stands for double ampersand) and +# prevents the letter following the ampersand being used as an accesskey. + +# Do not replace $BrandShortName, $BrandFullName, or $BrandFullNameDA with a +# custom string and always use the same one as used by the en-US files. +# $BrandFullNameDA allows the string to contain an ampersand (e.g. DA stands +# for double ampersand) and prevents the letter following the ampersand from +# being used as an accesskey. + +# You can use \n to create a newline in the string but only when the string +# from en-US contains a \n. + +# Strings that require a space at the end should be enclosed with double +# quotes and the double quotes will be removed. To add quotes to the beginning +# and end of a string enclose the strin with an additional double quote +# (e.g. ""This will include quotes""). + +SetupCaption=$(^Name) Setup +UninstallCaption=$(^Name) Uninstall +BackBtn=< &Back +NextBtn=&Next > +AcceptBtn=I &accept the terms in the License Agreement +DontAcceptBtn=I &do not accept the terms in the License Agreement +InstallBtn=&Install +UninstallBtn=&Uninstall +CancelBtn=Cancel +CloseBtn=&Close +BrowseBtn=B&rowse... +ShowDetailsBtn=Show &details +ClickNext=Click Next to continue. +ClickInstall=Click Install to start the installation. +ClickUninstall=Click Uninstall to start the uninstallation. +Completed=Completed +LicenseTextRB=Please review the license agreement before installing $(^NameDA). If you accept all terms of the agreement, select the first option below. $_CLICK +ComponentsText=Check the components you want to install and uncheck the components you don't want to install. $_CLICK +ComponentsSubText2_NoInstTypes=Select components to install: +DirText=Setup will install $(^NameDA) in the following folder. To install in a different folder, click Browse and select another folder. $_CLICK +DirSubText=Destination Folder +DirBrowseText=Select the folder to install $(^NameDA) in: +SpaceAvailable="Space available: " +SpaceRequired="Space required: " +UninstallingText=$(^NameDA) will be uninstalled from the following folder. $_CLICK +UninstallingSubText=Uninstalling from: +FileError=Error opening file for writing: \r\n\r\n$0\r\n\r\nClick Abort to stop the installation,\r\nRetry to try again, or\r\nIgnore to skip this file. +FileError_NoIgnore=Error opening file for writing: \r\n\r\n$0\r\n\r\nClick Retry to try again, or\r\nCancel to stop the installation. +CantWrite="Can't write: " +CopyFailed=Copy failed +CopyTo="Copy to " +Registering="Registering: " +Unregistering="Unregistering: " +SymbolNotFound="Could not find symbol: " +CouldNotLoad="Could not load: " +CreateFolder="Create folder: " +CreateShortcut="Create shortcut: " +CreatedUninstaller="Created uninstaller: " +Delete="Delete file: " +DeleteOnReboot="Delete on reboot: " +ErrorCreatingShortcut="Error creating shortcut: " +ErrorCreating="Error creating: " +ErrorDecompressing=Error decompressing data! Corrupted installer? +ErrorRegistering=Error registering DLL +ExecShell="ExecShell: " +Exec="Execute: " +Extract="Extract: " +ErrorWriting="Extract: error writing to file " +InvalidOpcode=Installer corrupted: invalid opcode +NoOLE="No OLE for: " +OutputFolder="Output folder: " +RemoveFolder="Remove folder: " +RenameOnReboot="Rename on reboot: " +Rename="Rename: " +Skipped="Skipped: " +CopyDetails=Copy Details To Clipboard +LogInstall=Log install process +Byte=B +Kilo=K +Mega=M +Giga=G |