# GIMP - The GNU Image Manipulation Program
# Copyright (C) 1995 Spencer Kimball and Peter Mattis

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

# "Perlized" from C source by Manish Singh <yosh@gimp.org>

sub image_select_color {
    $blurb = <<'BLURB';
Create a selection by selecting all pixels (in the specified drawable)
with the same (or similar) color to that specified.
BLURB

    $help = <<'HELP';
This tool creates a selection over the specified image. A by-color
selection is determined by the supplied color under the constraints of
the current context settings. Essentially, all pixels (in the drawable)
that have color sufficiently close to the specified color (as
determined by the threshold and criterion context values) are included
in the selection. To select transparent regions, the color specified
must also have minimum alpha.


This procedure is affected by the following context setters:
gimp_context_set_antialias(), gimp_context_set_feather(),
gimp_context_set_feather_radius(), gimp_context_set_sample_merged(),
gimp_context_set_sample_criterion(), gimp_context_set_sample_threshold(),
gimp_context_set_sample_transparent().


In the case of a merged sampling, the supplied drawable is ignored.
HELP

    &david_pdb_misc('2010', '2.8');

    @inargs = (
	{ name => 'image', type => 'image',
	  desc => 'The affected image' },
	{ name => 'operation', type => 'enum GimpChannelOps',
	  desc => 'The selection operation' },
	{ name => 'drawable', type => 'drawable',
	  desc => 'The affected drawable' },
	{ name => 'color', type => 'color',
	  desc => 'The color to select' }
    );

    %invoke = (
	code => <<'CODE'
{
  GimpPDBContext *pdb_context = GIMP_PDB_CONTEXT (context);

  if (pdb_context->sample_merged ||
      gimp_pdb_item_is_attached (GIMP_ITEM (drawable), image, 0, error))
    {
      gimp_channel_select_by_color (gimp_image_get_mask (image), drawable,
                                    pdb_context->sample_merged,
                                    &color,
                                    pdb_context->sample_threshold,
                                    pdb_context->sample_transparent,
                                    pdb_context->sample_criterion,
                                    operation,
                                    pdb_context->antialias,
                                    pdb_context->feather,
                                    pdb_context->feather_radius_x,
                                    pdb_context->feather_radius_y);
    }
  else
    success = FALSE;
}
CODE
    );
}


sub image_select_contiguous_color {
    $blurb = <<'BLURB';
Create a selection by selecting all pixels around specified coordinates
with the same (or similar) color to that at the coordinates.
BLURB

    $help = <<'HELP';
This tool creates a contiguous selection over the specified image. A
contiguous color selection is determined by a seed fill under the
constraints of the current context settings.  Essentially, the color
at the specified coordinates (in the drawable) is measured and the
selection expands outwards from that point to any adjacent pixels
which are not significantly different (as determined by the threshold
and criterion context settings). This process continues until no more
expansion is possible. If antialiasing is turned on, the final
selection mask will contain intermediate values based on close misses
to the threshold bar at pixels along the seed fill boundary.


This procedure is affected by the following context setters:
gimp_context_set_antialias(), gimp_context_set_feather(),
gimp_context_set_feather_radius(), gimp_context_set_sample_merged(),
gimp_context_set_sample_criterion(), gimp_context_set_sample_threshold(),
gimp_context_set_sample_transparent(), gimp_context_set_diagonal_neighbors().


In the case of a merged sampling, the supplied drawable is ignored.
If the sample is merged, the specified coordinates are relative to the
image origin; otherwise, they are relative to the drawable's origin.
HELP

    &david_pdb_misc('2010', '2.8');

    @inargs = (
	{ name => 'image', type => 'image',
	  desc => 'The affected image' },
	{ name => 'operation', type => 'enum GimpChannelOps',
	  desc => 'The selection operation' },
	{ name => 'drawable', type => 'drawable',
	  desc => 'The affected drawable' },
	{ name => 'x', type => 'float',
	  desc => 'x coordinate of initial seed fill point: (image
	  	   coordinates)' },
	{ name => 'y', type => 'float',
	  desc => 'y coordinate of initial seed fill point: (image
	  	   coordinates)' }
    );

    %invoke = (
	code => <<'CODE'
{
  GimpPDBContext *pdb_context = GIMP_PDB_CONTEXT (context);

  if (pdb_context->sample_merged ||
      gimp_pdb_item_is_attached (GIMP_ITEM (drawable), image, 0, error))
    {

      gimp_channel_select_fuzzy (gimp_image_get_mask (image),
                                 drawable,
                                 pdb_context->sample_merged,
                                 x, y,
                                 pdb_context->sample_threshold,
                                 pdb_context->sample_transparent,
                                 pdb_context->sample_criterion,
                                 pdb_context->diagonal_neighbors,
                                 operation,
                                 pdb_context->antialias,
                                 pdb_context->feather,
                                 pdb_context->feather_radius_x,
                                 pdb_context->feather_radius_y);
    }
  else
    success = FALSE;
}
CODE
    );
}


sub image_select_rectangle {
    $blurb = 'Create a rectangular selection over the specified image;';

    $help = <<'HELP';
This tool creates a rectangular selection over the specified
image. The rectangular region can be either added to, subtracted from,
or replace the contents of the previous selection mask.


This procedure is affected by the following context setters:
gimp_context_set_feather(), gimp_context_set_feather_radius().
HELP

    &mitch_pdb_misc('2010', '2.8');

    @inargs = (
	{ name => 'image', type => 'image',
	  desc => 'The image' },
	{ name => 'operation', type => 'enum GimpChannelOps',
	  desc => 'The selection operation' },
	{ name => 'x', type => 'float',
	  desc => 'x coordinate of upper-left corner of rectangle' },
	{ name => 'y', type => 'float',
	  desc => 'y coordinate of upper-left corner of rectangle' },
	{ name => 'width', type => '0 < float',
	  desc => 'The width of the rectangle' },
	{ name => 'height', type => '0 < float',
	  desc => 'The height of the rectangle' }
    );

    %invoke = (
	code => <<'CODE'
{
  GimpPDBContext *pdb_context = GIMP_PDB_CONTEXT (context);

  gimp_channel_select_rectangle (gimp_image_get_mask (image),
                                 (gint) x, (gint) y,
                                 (gint) width, (gint) height,
                                 operation,
                                 pdb_context->feather,
                                 pdb_context->feather_radius_x,
                                 pdb_context->feather_radius_y,
                                 TRUE);
}
CODE
    );
}


sub image_select_round_rectangle {
    $blurb = 'Create a rectangular selection with round corners over the specified image;';

    $help = <<'HELP';
This tool creates a rectangular selection with round corners over the
specified image. The rectangular region can be either added to,
subtracted from, or replace the contents of the previous selection
mask.


This procedure is affected by the following context setters:
gimp_context_set_antialias(), gimp_context_set_feather(),
gimp_context_set_feather_radius().
HELP

    &martin_pdb_misc('2010', '2.8');

    @inargs = (
	{ name => 'image', type => 'image',
	  desc => 'The image' },
	{ name => 'operation', type => 'enum GimpChannelOps',
	  desc => 'The selection operation' },
	{ name => 'x', type => 'float',
	  desc => 'x coordinate of upper-left corner of rectangle' },
	{ name => 'y', type => 'float',
	  desc => 'y coordinate of upper-left corner of rectangle' },
	{ name => 'width', type => '0 < float',
	  desc => 'The width of the rectangle' },
	{ name => 'height', type => '0 < float',
	  desc => 'The height of the rectangle' },
        { name => 'corner_radius_x', type => '0 < float < GIMP_MAX_IMAGE_SIZE',
          desc => 'The corner radius in X direction' },
        { name => 'corner_radius_y', type => '0 < float < GIMP_MAX_IMAGE_SIZE',
          desc => 'The corner radius in Y direction' }
    );

    %invoke = (
	code => <<'CODE'
{
  GimpPDBContext *pdb_context = GIMP_PDB_CONTEXT (context);

  gimp_channel_select_round_rect (gimp_image_get_mask (image),
                                  (gint) x, (gint) y,
                                  (gint) width, (gint) height,
                                  corner_radius_x,
                                  corner_radius_y,
                                  operation,
                                  pdb_context->antialias,
                                  pdb_context->feather,
                                  pdb_context->feather_radius_x,
                                  pdb_context->feather_radius_y,
                                  TRUE);
}
CODE
    );
}


sub image_select_ellipse {
    $blurb = 'Create an elliptical selection over the specified image.';

    $help = <<'HELP';
This tool creates an elliptical selection over the specified
image. The elliptical region can be either added to, subtracted from,
or replace the contents of the previous selection mask.


This procedure is affected by the following context setters:
gimp_context_set_antialias(), gimp_context_set_feather(),
gimp_context_set_feather_radius().
HELP

    &mitch_pdb_misc('2010', '2.8');

    @inargs = (
	{ name => 'image', type => 'image',
	  desc => 'The image' },
	{ name => 'operation', type => 'enum GimpChannelOps',
	  desc => 'The selection operation' },
	{ name => 'x', type => 'float',
	  desc => 'x coordinate of upper-left corner of ellipse bounding box' },
	{ name => 'y', type => 'float',
	  desc => 'y coordinate of upper-left corner of ellipse bounding box' },
	{ name => 'width', type => '0 < float',
	  desc => 'The width of the ellipse' },
	{ name => 'height', type => '0 < float',
	  desc => 'The height of the ellipse' }
    );

    %invoke = (
	code => <<'CODE'
{
  GimpPDBContext *pdb_context = GIMP_PDB_CONTEXT (context);

  gimp_channel_select_ellipse (gimp_image_get_mask (image),
                               (gint) x, (gint) y,
                               (gint) width, (gint) height,
                               operation,
                               pdb_context->antialias,
                               pdb_context->feather,
                               pdb_context->feather_radius_x,
                               pdb_context->feather_radius_y,
                               TRUE);
}
CODE
    );
}


sub image_select_polygon {
    $blurb = 'Create a polygonal selection over the specified image.';

    $help = <<'HELP';
This tool creates a polygonal selection over the specified image. The
polygonal region can be either added to, subtracted from, or replace
the contents of the previous selection mask. The polygon is specified
through an array of floating point numbers and its length. The length
of array must be 2n, where n is the number of points. Each point is
defined by 2 floating point values which correspond to the x and y
coordinates. If the final point does not connect to the starting
point, a connecting segment is automatically added.


This procedure is affected by the following context setters:
gimp_context_set_antialias(), gimp_context_set_feather(),
gimp_context_set_feather_radius().
HELP

    &mitch_pdb_misc('2010', '2.8');

    @inargs = (
	{ name => 'image', type => 'image',
	  desc => 'The image' },
	{ name => 'operation', type => 'enum GimpChannelOps',
	  desc => 'The selection operation' },
        { name => 'segs', type => 'floatarray',
          desc => 'Array of points: { p1.x, p1.y, p2.x, p2.y, ...,
                   pn.x, pn.y}',
          array => { type => '2 <= int32',
                     desc => 'Number of points (count 1 coordinate as two
                              points)' } }
    );

    %invoke = (
        code => <<'CODE'
{
  GimpPDBContext *pdb_context = GIMP_PDB_CONTEXT (context);

  gimp_channel_select_polygon (gimp_image_get_mask (image),
                               _("Free Select"),
                               num_segs / 2,
                               (GimpVector2 *) segs,
                               operation,
                               pdb_context->antialias,
                               pdb_context->feather,
                               pdb_context->feather_radius_x,
                               pdb_context->feather_radius_y,
                               TRUE);
}
CODE
    );
}


sub image_select_item {
    $blurb = 'Transforms the specified item into a selection';

    $help = <<'HELP';
This procedure renders the item's outline into the current selection
of the image the item belongs to. What exactly the item's outline is
depends on the item type: for layers, it's the layer's alpha channel,
for vectors the vector's shape.


This procedure is affected by the following context setters:
gimp_context_set_antialias(), gimp_context_set_feather(),
gimp_context_set_feather_radius().
HELP

    &mitch_pdb_misc('2010', '2.8');

    @inargs = (
	{ name => 'image', type => 'image',
	  desc => 'The image' },
        { name => 'operation', type => 'enum GimpChannelOps',
          desc => 'The desired operation with current selection' },
        { name => 'item', type => 'item',
          desc => 'The item to render to the selection' }
    );

    %invoke = (
        code => <<'CODE'
{
  if (gimp_pdb_item_is_attached (item, image, 0, error))
    {
      GimpPDBContext *pdb_context = GIMP_PDB_CONTEXT (context);

      gimp_item_to_selection (item, operation,
                              pdb_context->antialias,
                              pdb_context->feather,
                              pdb_context->feather_radius_x,
                              pdb_context->feather_radius_y);
    }
  else
    success = FALSE;
}
CODE
    );

}


@headers = qw("libgimpbase/gimpbase.h"
              "core/gimpchannel-select.h"
              "gimppdb-utils.h"
              "gimppdbcontext.h"
              "gimp-intl.h");

@procs = qw(image_select_color
            image_select_contiguous_color
            image_select_rectangle
            image_select_round_rectangle
            image_select_ellipse
            image_select_polygon
            image_select_item);

%exports = (app => [@procs], lib => [@procs]);

$desc = 'Selection procedures';
$doc_title = 'gimpimageselect';
$doc_short_desc = "Modify the image's selection.";
$doc_long_desc = "Functions to modify the image's selection.";

1;