From 5ec6074f0633939fd17d94111d10c6c6b062978c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 11:49:36 +0200 Subject: Adding upstream version 1:2.30.2. Signed-off-by: Daniel Baumann --- Documentation/git-bundle.txt | 252 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 252 insertions(+) create mode 100644 Documentation/git-bundle.txt (limited to 'Documentation/git-bundle.txt') diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt new file mode 100644 index 0000000..53804ca --- /dev/null +++ b/Documentation/git-bundle.txt @@ -0,0 +1,252 @@ +git-bundle(1) +============= + +NAME +---- +git-bundle - Move objects and refs by archive + + +SYNOPSIS +-------- +[verse] +'git bundle' create [-q | --quiet | --progress | --all-progress] [--all-progress-implied] + [--version=] +'git bundle' verify [-q | --quiet] +'git bundle' list-heads [...] +'git bundle' unbundle [...] + +DESCRIPTION +----------- + +Some workflows require that one or more branches of development on one +machine be replicated on another machine, but the two machines cannot +be directly connected, and therefore the interactive Git protocols (git, +ssh, http) cannot be used. + +The 'git bundle' command packages objects and references in an archive +at the originating machine, which can then be imported into another +repository using 'git fetch', 'git pull', or 'git clone', +after moving the archive by some means (e.g., by sneakernet). + +As no +direct connection between the repositories exists, the user must specify a +basis for the bundle that is held by the destination repository: the +bundle assumes that all objects in the basis are already in the +destination repository. + +OPTIONS +------- + +create [options] :: + Used to create a bundle named 'file'. This requires the + '' arguments to define the bundle contents. + 'options' contains the options specific to the 'git bundle create' + subcommand. + +verify :: + Used to check that a bundle file is valid and will apply + cleanly to the current repository. This includes checks on the + bundle format itself as well as checking that the prerequisite + commits exist and are fully linked in the current repository. + 'git bundle' prints a list of missing commits, if any, and exits + with a non-zero status. + +list-heads :: + Lists the references defined in the bundle. If followed by a + list of references, only references matching those given are + printed out. + +unbundle :: + Passes the objects in the bundle to 'git index-pack' + for storage in the repository, then prints the names of all + defined references. If a list of references is given, only + references matching those in the list are printed. This command is + really plumbing, intended to be called only by 'git fetch'. + +:: + A list of arguments, acceptable to 'git rev-parse' and + 'git rev-list' (and containing a named ref, see SPECIFYING REFERENCES + below), that specifies the specific objects and references + to transport. For example, `master~10..master` causes the + current master reference to be packaged along with all objects + added since its 10th ancestor commit. There is no explicit + limit to the number of references and objects that may be + packaged. + + +[...]:: + A list of references used to limit the references reported as + available. This is principally of use to 'git fetch', which + expects to receive only those references asked for and not + necessarily everything in the pack (in this case, 'git bundle' acts + like 'git fetch-pack'). + +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if + the standard error stream is not directed to a terminal. + +--all-progress:: + When --stdout is specified then progress report is + displayed during the object count and compression phases + but inhibited during the write-out phase. The reason is + that in some cases the output stream is directly linked + to another command which may wish to display progress + status of its own as it processes incoming pack data. + This flag is like --progress except that it forces progress + report for the write-out phase as well even if --stdout is + used. + +--all-progress-implied:: + This is used to imply --all-progress whenever progress display + is activated. Unlike --all-progress this flag doesn't actually + force any progress display by itself. + +--version=:: + Specify the bundle version. Version 2 is the older format and can only be + used with SHA-1 repositories; the newer version 3 contains capabilities that + permit extensions. The default is the oldest supported format, based on the + hash algorithm in use. + +-q:: +--quiet:: + This flag makes the command not to report its progress + on the standard error stream. + +SPECIFYING REFERENCES +--------------------- + +'git bundle' will only package references that are shown by +'git show-ref': this includes heads, tags, and remote heads. References +such as `master~1` cannot be packaged, but are perfectly suitable for +defining the basis. More than one reference may be packaged, and more +than one basis can be specified. The objects packaged are those not +contained in the union of the given bases. Each basis can be +specified explicitly (e.g. `^master~10`), or implicitly (e.g. +`master~10..master`, `--since=10.days.ago master`). + +It is very important that the basis used be held by the destination. +It is okay to err on the side of caution, causing the bundle file +to contain objects already in the destination, as these are ignored +when unpacking at the destination. + +`git clone` can use any bundle created without negative refspecs +(e.g., `new`, but not `old..new`). +If you want to match `git clone --mirror`, which would include your +refs such as `refs/remotes/*`, use `--all`. +If you want to provide the same set of refs that a clone directly +from the source repository would get, use `--branches --tags` for +the ``. + +EXAMPLES +-------- + +Assume you want to transfer the history from a repository R1 on machine A +to another repository R2 on machine B. +For whatever reason, direct connection between A and B is not allowed, +but we can move data from A to B via some mechanism (CD, email, etc.). +We want to update R2 with development made on the branch master in R1. + +To bootstrap the process, you can first create a bundle that does not have +any basis. You can use a tag to remember up to what commit you last +processed, in order to make it easy to later update the other repository +with an incremental bundle: + +---------------- +machineA$ cd R1 +machineA$ git bundle create file.bundle master +machineA$ git tag -f lastR2bundle master +---------------- + +Then you transfer file.bundle to the target machine B. Because this +bundle does not require any existing object to be extracted, you can +create a new repository on machine B by cloning from it: + +---------------- +machineB$ git clone -b master /home/me/tmp/file.bundle R2 +---------------- + +This will define a remote called "origin" in the resulting repository that +lets you fetch and pull from the bundle. The $GIT_DIR/config file in R2 will +have an entry like this: + +------------------------ +[remote "origin"] + url = /home/me/tmp/file.bundle + fetch = refs/heads/*:refs/remotes/origin/* +------------------------ + +To update the resulting mine.git repository, you can fetch or pull after +replacing the bundle stored at /home/me/tmp/file.bundle with incremental +updates. + +After working some more in the original repository, you can create an +incremental bundle to update the other repository: + +---------------- +machineA$ cd R1 +machineA$ git bundle create file.bundle lastR2bundle..master +machineA$ git tag -f lastR2bundle master +---------------- + +You then transfer the bundle to the other machine to replace +/home/me/tmp/file.bundle, and pull from it. + +---------------- +machineB$ cd R2 +machineB$ git pull +---------------- + +If you know up to what commit the intended recipient repository should +have the necessary objects, you can use that knowledge to specify the +basis, giving a cut-off point to limit the revisions and objects that go +in the resulting bundle. The previous example used the lastR2bundle tag +for this purpose, but you can use any other options that you would give to +the linkgit:git-log[1] command. Here are more examples: + +You can use a tag that is present in both: + +---------------- +$ git bundle create mybundle v1.0.0..master +---------------- + +You can use a basis based on time: + +---------------- +$ git bundle create mybundle --since=10.days master +---------------- + +You can use the number of commits: + +---------------- +$ git bundle create mybundle -10 master +---------------- + +You can run `git-bundle verify` to see if you can extract from a bundle +that was created with a basis: + +---------------- +$ git bundle verify mybundle +---------------- + +This will list what commits you must have in order to extract from the +bundle and will error out if you do not have them. + +A bundle from a recipient repository's point of view is just like a +regular repository which it fetches or pulls from. You can, for example, map +references when fetching: + +---------------- +$ git fetch mybundle master:localRef +---------------- + +You can also see what references it offers: + +---------------- +$ git ls-remote mybundle +---------------- + +GIT +--- +Part of the linkgit:git[1] suite -- cgit v1.2.3