From 8de1ee1b2b676b0d07586f0752750dd6b0fb7511 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 11:59:15 +0200 Subject: Adding upstream version 2.2.27. Signed-off-by: Daniel Baumann --- doc/HACKING | 433 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 433 insertions(+) create mode 100644 doc/HACKING (limited to 'doc/HACKING') diff --git a/doc/HACKING b/doc/HACKING new file mode 100644 index 0000000..bd16856 --- /dev/null +++ b/doc/HACKING @@ -0,0 +1,433 @@ +# HACKING -*- org -*- +#+TITLE: A Hacker's Guide to GnuPG +#+TEXT: Some notes on GnuPG internals +#+STARTUP: showall +#+OPTIONS: ^:{} + +* How to contribute + + The following stuff explains some basic procedures you need to + follow if you want to contribute code or documentation. + +** No more ChangeLog files + +Do not modify any of the ChangeLog files in GnuPG. Starting on +December 1st, 2011 we put change information only in the GIT commit +log, and generate a top-level ChangeLog file from logs at "make dist" +time. As such, there are strict requirements on the form of the +commit log messages. The old ChangeLog files have all be renamed to +ChangeLog-2011 + +** Commit log requirements + +Your commit log should always start with a one-line summary, the +second line should be blank, and the remaining lines are usually +ChangeLog-style entries for all affected files. However, it's fine +--- even recommended --- to write a few lines of prose describing the +change, when the summary and ChangeLog entries don't give enough of +the big picture. Omit the leading TABs that you are seeing in a +"real" ChangeLog file, but keep the maximum line length at 72 or +smaller, so that the generated ChangeLog lines, each with its leading +TAB, will not exceed 80 columns. If you want to add text which shall +not be copied to the ChangeLog, separate it by a line consisting of +two dashes at the begin of a line. + +The one-line summary usually starts with a keyword to identify the +mainly affected subsystem. If more than one keyword is required the +are delimited by a comma (e.g. =scd,w32:=). Commonly found keywords +are + + - agent :: The gpg-agent component + - build :: Changes to the build system + - ccid :: The CCID driver in scdaemon + - common :: Code in common + - dirmngr :: The dirmngr component + - doc :: Documentation changes + - gpg :: The gpg or gpgv components + - sm :: The gpgsm component (also "gpgsm") + - gpgscm :: The regression test driver + - indent :: Indentation and similar changes + - iobuf :: The IOBUF system in common + - po :: Translations + - scd :: The scdaemon component + - speedo :: Speedo build system specific changes + - ssh :: The ssh-agent part of the agent + - tests :: The regressions tests + - tools :: Other code in tools + - w32 :: Windows related code + - wks :: The web key service tools + - yat2m :: The yat2m tool. + +Typo fixes and documentation updates don't need a ChangeLog entry; +thus you would use a commit message like + +#+begin_example +doc: Fix typo in a comment + +-- +#+end_example + +The marker line here is important; without it the first line would +appear in the ChangeLog. + +If you exceptionally need to have longer lines in a commit log you may +do this after this scissor line: +#+begin_example +# ------------------------ >8 ------------------------ +#+end_example +(hash, blank, 24 dashes, blank, scissor, blank, 24 dashes). +Note that such a comment will be removed if the git commit option +=--cleanup=scissor= is used. + +** License policy + + GnuPG is licensed under the GPLv3+ with some files under a mixed + LGPLv3+/GPLv2+ license. It is thus important, that all contributed + code allows for an update of the license; for example we can't + accept code under the GPLv2(only). + + GnuPG used to have a strict policy of requiring copyright + assignments to the FSF. To avoid this major organizational overhead + and to allow inclusion of code, not copyrighted by the FSF, this + policy has been relaxed on 2013-03-29. It is now also possible to + contribute code by asserting that the contribution is in accordance + to the "Libgcrypt Developer's Certificate of Origin" as found in the + file "DCO". (Except for a slight wording change, this DCO is + identical to the one used by the Linux kernel.) + + If you want to contribute code or documentation to GnuPG and you + didn't sign a copyright assignment with the FSF in the past, you + need to take these simple steps: + + - Decide which mail address you want to use. Please have your real + name in the address and not a pseudonym. Anonymous contributions + can only be done if you find a proxy who certifies for you. + + - If your employer or school might claim ownership of code written + by you; you need to talk to them to make sure that you have the + right to contribute under the DCO. + + - Send an OpenPGP signed mail to the gnupg-devel@gnupg.org mailing + list from your mail address. Include a copy of the DCO as found + in the official master branch. Insert your name and email address + into the DCO in the same way you want to use it later. Example: + + Signed-off-by: Joe R. Hacker + + (If you really need it, you may perform simple transformations of + the mail address: Replacing "@" by " at " or "." by " dot ".) + + - That's it. From now on you only need to add a "Signed-off-by:" + line with your name and mail address to the commit message. It is + recommended to send the patches using a PGP/MIME signed mail. + +** Coding standards + + Please follow the GNU coding standards. If you are in doubt consult + the existing code as an example. Do no re-indent code without a + need. If you really need to do it, use a separate commit for such a + change. + + - Only certain C99 features may be used (see below); in general + stick to C90. + - Please do not use C++ =//= style comments. + - Do not use comments like: +#+begin_src + if (foo) + /* Now that we know that foo is true we can call bar. */ + bar (); +#+end_src + instead write the comment on the if line or before it. You may + also use a block and put the comment inside. + - Please use asterisks on the left of longer comments. This makes + it easier to read without syntax highlighting, on printouts, and + for blind people. + - Try to fit lines into 80 columns. + - Ignore signed/unsigned pointer mismatches + - No arithmetic on void pointers; cast to char* first. + - Do not use +#+begin_src + if ( 42 == foo ) +#+end_src + this is harder to read and modern compilers are pretty good in + detecing accidential assignments. It is also suggested not to + compare to 0 or NULL but to test the value direct or with a '!'; + this makes it easier to see that a boolean test is done. + - We use our own printf style functions like =es_printf=, and + =gpgrt_asprintf= (or the =es_asprintf= macro) which implement most + C99 features with the exception of =wchar_t= (which should anyway + not be used). Please use them always and do not resort to those + provided by libc. The rationale for using them is that we know + that the format specifiers work on all platforms and that we do + not need to chase platform dependent bugs. Note also that in + gnupg asprintf is a macro already evaluating to gpgrt_asprintf. + - It is common to have a label named "leave" for a function's + cleanup and return code. This helps with freeing memory and is a + convenient location to set a breakpoint for debugging. + - Always use xfree() instead of free(). If it is not easy to see + that the freed variable is not anymore used, explicitly set the + variable to NULL. + - New code shall in general use xtrymalloc or xtrycalloc and check + for an error (use gpg_error_from_syserror()). + - Init function local variables only if needed so that the compiler + can do a better job in detecting uninitialized variables which may + indicate a problem with the code. + - Never init static or file local variables to 0 to make sure they + end up in BSS. + - Put extra parenthesis around terms with binary operators to make + it clear that the binary operator was indeed intended. + - Use --enable-maintainer-mode with configure so that all suitable + warnings are enabled. + +** Variable names + + Follow the GNU standards. Here are some conventions you may want to + stick to (do not rename existing "wrong" uses without a goog + reason). + + - err :: This conveys an error code of type =gpg_error_t= which is + compatible to an =int=. To compare such a variable to a + GPG_ERR_ constant, it is necessary to map the value like + this: =gpg_err_code(err)=. + - ec :: This is used for a gpg-error code which has no source part + (=gpg_err_code_t=) and will eventually be used as input to + =gpg_err_make=. + - rc :: Used for all kind of other errors; for example system + calls. The value is not compatible with gpg-error. + + +*** C99 language features + + In GnuPG 2.x, but *not in 1.4* and not in most libraries, a limited + set of C99 features may be used: + + - Variadic macros: + : #define foo(a,...) bar(a, __VA_ARGS__) + + - The predefined macro =__func__=: + : log_debug ("%s: Problem with foo\n", __func__); + + - Variable declaration inside a for(): + : for (int i = 0; i < 5; ++) + : bar (i); + + Although we usually make use of the =u16=, =u32=, and =u64= types, + it is also possible to include == and use =int16_t=, + =int32_t=, =int64_t=, =uint16_t=, =uint32_t=, and =uint64_t=. But do + not use =int8_t= or =uint8_t=. + +** Commit log keywords + + - GnuPG-bug-id :: Values are comma or space delimited bug numbers + from bug.gnupg.org pertaining to this commit. + - Debian-bug-id :: Same as above but from the Debian bug tracker. + - CVE-id :: CVE id number pertaining to this commit. + - Regression-due-to :: Commit id of the regression fixed by this commit. + - Fixes-commit :: Commit id this commit fixes. + - Updates-commit :: Commit id this commit updates. + - Reported-by :: Value is a name or mail address of a bug reporte. + - Suggested-by :: Value is a name or mail address of someone how + suggested this change. + - Co-authored-by :: Name or mail address of a co-author + - Some-comments-by :: Name or mail address of the author of + additional comments (commit log or code). + - Proofread-by :: Sometimes used by translation commits. + - Signed-off-by :: Name or mail address of the developer + +* Windows +** How to build an installer for Windows + + Your best bet is to use a decent Debian System for development. + You need to install a long list of tools for building. This list + still needs to be compiled. However, the build process will stop + if a tool is missing. GNU make is required (on non GNU systems + often installed as "gmake"). The installer requires a couple of + extra software to be available either as tarballs or as local git + repositories. In case this file here is part of a gnupg-w32-2.*.xz + complete tarball as distributed from the same place as a binary + installer, all such tarballs are already included. + + Cd to the GnuPG source directory and use one of one of these + command: + + - If sources are included (gnupg-w32-*.tar.xz) + + make -f build-aux/speedo.mk WHAT=this installer + + - To build from tarballs + + make -f build-aux/speedo.mk WHAT=release TARBALLS=TARDIR installer + + - To build from local GIT repos + + make -f build-aux/speedo.mk WHAT=git TARBALLS=TARDIR installer + + Note that also you need to supply tarballs with supporting + libraries even if you build from git. The makefile expects only + the core GnuPG software to be available as local GIT repositories. + speedo.mk has the versions of the tarballs and the branch names of + the git repositories. In case of problems, don't hesitate to ask + on the gnupg-devel mailing for help. + +* Debug hints + + See the manual for some hints. + +* Standards +** RFCs + +1423 Privacy Enhancement for Internet Electronic Mail: + Part III: Algorithms, Modes, and Identifiers. + +1489 Registration of a Cyrillic Character Set. + +1750 Randomness Recommendations for Security. + +1991 PGP Message Exchange Formats (obsolete) + +2144 The CAST-128 Encryption Algorithm. + +2279 UTF-8, a transformation format of ISO 10646. + +2440 OpenPGP (obsolete). + +3156 MIME Security with Pretty Good Privacy (PGP). + +4880 Current OpenPGP specification. + +6337 Elliptic Curve Cryptography (ECC) in OpenPGP + +* Various information + +** Directory Layout + + - ./ :: Readme, configure + - ./agent :: Gpg-agent and related tools + - ./doc :: Documentation + - ./g10 :: Gpg program here called gpg2 + - ./sm :: Gpgsm program + - ./jnlib :: Not used (formerly used utility functions) + - ./common :: Utility functions + - ./kbx :: Keybox library + - ./scd :: Smartcard daemon + - ./scripts :: Scripts needed by configure and others + - ./dirmngr :: The directory manager + +** Detailed Roadmap + + This list of files is not up to date! + + - g10/gpg.c :: Main module with option parsing and all the stuff you + have to do on startup. Also has the exit handler and + some helper functions. + + - g10/parse-packet.c :: + - g10/build-packet.c :: + - g10/free-packet.c :: Parsing and creating of OpenPGP message packets. + + - g10/getkey.c :: Key selection code + - g10/pkclist.c :: Build a list of public keys + - g10/skclist.c :: Build a list of secret keys + - g10/keyring.c :: Keyring access functions + - g10/keydb.h :: + + - g10/keyid.c :: Helper functions to get the keyid, fingerprint etc. + + - g10/trustdb.c :: Web-of-Trust computations + - g10/trustdb.h :: + - g10/tdbdump.c :: Export/import/list the trustdb.gpg + - g10/tdbio.c :: I/O handling for the trustdb.gpg + - g10/tdbio.h :: + + - g10/compress.c :: Filter to handle compression + - g10/filter.h :: Declarations for all filter functions + - g10/delkey.c :: Delete a key + - g10/kbnode.c :: Helper for the kbnode_t linked list + - g10/main.h :: Prototypes and some constants + - g10/mainproc.c :: Message processing + - g10/armor.c :: Ascii armor filter + - g10/mdfilter.c :: Filter to calculate hashs + - g10/textfilter.c :: Filter to handle CR/LF and trailing white space + - g10/cipher.c :: En-/Decryption filter + - g10/misc.c :: Utility functions + - g10/options.h :: Structure with all the command line options + and related constants + - g10/openfile.c :: Create/Open Files + - g10/keyserver.h :: Keyserver access dispatcher. + - g10/packet.h :: Definition of OpenPGP structures. + - g10/passphrase.c :: Passphrase handling code + + - g10/pubkey-enc.c :: Process a public key encoded packet. + - g10/seckey-cert.c :: Not anymore used + - g10/seskey.c :: Make session keys etc. + - g10/import.c :: Import keys into our key storage. + - g10/export.c :: Export keys to the OpenPGP format. + - g10/sign.c :: Create signature and optionally encrypt. + - g10/plaintext.c :: Process plaintext packets. + - g10/decrypt-data.c :: Decrypt an encrypted data packet + - g10/encrypt.c :: Main encryption driver + - g10/revoke.c :: Create recovation certificates. + - g10/keylist.c :: Print information about OpenPGP keys + - g10/sig-check.c :: Check a signature + - g10/helptext.c :: Show online help texts + - g10/verify.c :: Verify signed data. + - g10/decrypt.c :: Decrypt and verify data. + - g10/keyedit.c :: Edit properties of a key. + - g10/dearmor.c :: Armor utility. + - g10/keygen.c :: Generate a key pair + +** Memory allocation + +Use only the functions: + + - xmalloc + - xmalloc_secure + - xtrymalloc + - xtrymalloc_secure + - xcalloc + - xcalloc_secure + - xtrycalloc + - xtrycalloc_secure + - xrealloc + - xtryrealloc + - xstrdup + - xtrystrdup + - xfree + + +The *secure versions allocate memory in the secure memory. That is, +swapping out of this memory is avoided and is gets overwritten on +free. Use this for passphrases, session keys and other sensitive +material. This memory set aside for secure memory is linited to a few +k. In general the function don't print a memeory message and +terminate the process if there is not enough memory available. The +"try" versions of the functions return NULL instead. + +** Logging + + TODO + +** Option parsing + +GnuPG does not use getopt or GNU getopt but functions of it's own. +See util/argparse.c for details. The advantage of these functions is +that it is more easy to display and maintain the help texts for the +options. The same option table is also used to parse resource files. + +** What is an IOBUF + +This is the data structure used for most I/O of gnupg. It is similar +to System V Streams but much simpler. Because OpenPGP messages are +nested in different ways; the use of such a system has big advantages. +Here is an example, how it works: If the parser sees a packet header +with a partial length, it pushes the block_filter onto the IOBUF to +handle these partial length packets: from now on you don't have to +worry about this. When it sees a compressed packet it pushes the +uncompress filter and the next read byte is one which has already been +uncompressed by this filter. Same goes for enciphered packet, +plaintext packets and so on. The file g10/encode.c might be a good +starting point to see how it is used - actually this is the other way: +constructing messages using pushed filters but it may be easier to +understand. + + -- cgit v1.2.3