summaryrefslogtreecommitdiffstats
path: root/src/livarot/PathConversion.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/livarot/PathConversion.cpp')
-rw-r--r--src/livarot/PathConversion.cpp1579
1 files changed, 1579 insertions, 0 deletions
diff --git a/src/livarot/PathConversion.cpp b/src/livarot/PathConversion.cpp
new file mode 100644
index 0000000..737ecbe
--- /dev/null
+++ b/src/livarot/PathConversion.cpp
@@ -0,0 +1,1579 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/** @file
+ * TODO: insert short description here
+ *//*
+ * Authors:
+ * see git history
+ * Fred
+ *
+ * Copyright (C) 2018 Authors
+ * Released under GNU GPL v2+, read the file 'COPYING' for more information.
+ */
+
+#include <glib.h>
+#include <2geom/transforms.h>
+#include "Path.h"
+#include "Shape.h"
+#include "livarot/path-description.h"
+
+/*
+ * path description -> polyline
+ * and Path -> Shape (the Fill() function at the bottom)
+ * nathing fancy here: take each command and append an approximation of it to the polyline
+ */
+
+void Path::ConvertWithBackData(double treshhold)
+{
+ if ( descr_flags & descr_adding_bezier ) {
+ CancelBezier();
+ }
+
+ if ( descr_flags & descr_doing_subpath ) {
+ CloseSubpath();
+ }
+
+ SetBackData(true);
+ ResetPoints();
+ if ( descr_cmd.empty() ) {
+ return;
+ }
+
+ Geom::Point curX;
+ int curP = 1;
+ int lastMoveTo = -1;
+
+ // The initial moveto.
+ {
+ int const firstTyp = descr_cmd[0]->getType();
+ if ( firstTyp == descr_moveto ) {
+ curX = dynamic_cast<PathDescrMoveTo *>(descr_cmd[0])->p;
+ } else {
+ curP = 0;
+ curX[Geom::X] = curX[Geom::Y] = 0;
+ }
+ lastMoveTo = AddPoint(curX, 0, 0.0, true);
+ }
+
+ // And the rest, one by one.
+ while ( curP < int(descr_cmd.size()) ) {
+
+ int const nType = descr_cmd[curP]->getType();
+ Geom::Point nextX;
+
+ switch (nType) {
+ case descr_forced: {
+ AddForcedPoint(curX, curP, 1.0);
+ curP++;
+ break;
+ }
+
+ case descr_moveto: {
+ PathDescrMoveTo *nData = dynamic_cast<PathDescrMoveTo*>(descr_cmd[curP]);
+ nextX = nData->p;
+ lastMoveTo = AddPoint(nextX, curP, 0.0, true);
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_close: {
+ nextX = pts[lastMoveTo].p;
+ int n = AddPoint(nextX, curP, 1.0, false);
+ if (n > 0) pts[n].closed = true;
+ curP++;
+ break;
+ }
+
+ case descr_lineto: {
+ PathDescrLineTo *nData = dynamic_cast<PathDescrLineTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ AddPoint(nextX,curP,1.0,false);
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_cubicto: {
+ PathDescrCubicTo *nData = dynamic_cast<PathDescrCubicTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ RecCubicTo(curX, nData->start, nextX, nData->end, treshhold, 8, 0.0, 1.0, curP);
+ AddPoint(nextX, curP, 1.0, false);
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_arcto: {
+ PathDescrArcTo *nData = dynamic_cast<PathDescrArcTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ DoArc(curX, nextX, nData->rx, nData->ry, nData->angle, nData->large, nData->clockwise, treshhold, curP);
+ AddPoint(nextX, curP, 1.0, false);
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_bezierto: {
+ PathDescrBezierTo *nBData = dynamic_cast<PathDescrBezierTo *>(descr_cmd[curP]);
+ int nbInterm = nBData->nb;
+ nextX = nBData->p;
+
+ int ip = curP + 1;
+ PathDescrIntermBezierTo *nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ if ( nbInterm >= 1 ) {
+ Geom::Point bx = curX;
+ Geom::Point dx = nData->p;
+ Geom::Point cx = 2 * bx - dx;
+
+ ip++;
+ nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ for (int k = 0; k < nbInterm - 1; k++) {
+ bx = cx;
+ cx = dx;
+
+ dx = nData->p;
+ ip++;
+ nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ Geom::Point stx;
+ stx = (bx + cx) / 2;
+ if ( k > 0 ) {
+ AddPoint(stx,curP - 1+k,1.0,false);
+ }
+
+ {
+ Geom::Point mx;
+ mx = (cx + dx) / 2;
+ RecBezierTo(cx, stx, mx, treshhold, 8, 0.0, 1.0, curP + k);
+ }
+ }
+ {
+ bx = cx;
+ cx = dx;
+
+ dx = nextX;
+ dx = 2 * dx - cx;
+
+ Geom::Point stx;
+ stx = (bx + cx) / 2;
+
+ if ( nbInterm > 1 ) {
+ AddPoint(stx, curP + nbInterm - 2, 1.0, false);
+ }
+
+ {
+ Geom::Point mx;
+ mx = (cx + dx) / 2;
+ RecBezierTo(cx, stx, mx, treshhold, 8, 0.0, 1.0, curP + nbInterm - 1);
+ }
+ }
+
+ }
+
+
+ AddPoint(nextX, curP - 1 + nbInterm, 1.0, false);
+
+ // et on avance
+ curP += 1 + nbInterm;
+ break;
+ }
+ }
+ curX = nextX;
+ }
+}
+
+
+void Path::Convert(double treshhold)
+{
+ if ( descr_flags & descr_adding_bezier ) {
+ CancelBezier();
+ }
+
+ if ( descr_flags & descr_doing_subpath ) {
+ CloseSubpath();
+ }
+
+ SetBackData(false);
+ ResetPoints();
+ if ( descr_cmd.empty() ) {
+ return;
+ }
+
+ Geom::Point curX;
+ int curP = 1;
+ int lastMoveTo = 0;
+
+ // le moveto
+ {
+ int const firstTyp = descr_cmd[0]->getType();
+ if ( firstTyp == descr_moveto ) {
+ curX = dynamic_cast<PathDescrMoveTo *>(descr_cmd[0])->p;
+ } else {
+ curP = 0;
+ curX[0] = curX[1] = 0;
+ }
+ lastMoveTo = AddPoint(curX, true);
+ }
+ descr_cmd[0]->associated = lastMoveTo;
+
+ // et le reste, 1 par 1
+ while ( curP < int(descr_cmd.size()) ) {
+
+ int const nType = descr_cmd[curP]->getType();
+ Geom::Point nextX;
+
+ switch (nType) {
+ case descr_forced: {
+ descr_cmd[curP]->associated = AddForcedPoint(curX);
+ curP++;
+ break;
+ }
+
+ case descr_moveto: {
+ PathDescrMoveTo *nData = dynamic_cast<PathDescrMoveTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ lastMoveTo = AddPoint(nextX, true);
+ descr_cmd[curP]->associated = lastMoveTo;
+
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_close: {
+ nextX = pts[lastMoveTo].p;
+ descr_cmd[curP]->associated = AddPoint(nextX, false);
+ if ( descr_cmd[curP]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curP]->associated = 0;
+ } else {
+ descr_cmd[curP]->associated = descr_cmd[curP - 1]->associated;
+ }
+ }
+ if ( descr_cmd[curP]->associated > 0 ) {
+ pts[descr_cmd[curP]->associated].closed = true;
+ }
+ curP++;
+ break;
+ }
+
+ case descr_lineto: {
+ PathDescrLineTo *nData = dynamic_cast<PathDescrLineTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ descr_cmd[curP]->associated = AddPoint(nextX, false);
+ if ( descr_cmd[curP]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curP]->associated = 0;
+ } else {
+ descr_cmd[curP]->associated = descr_cmd[curP - 1]->associated;
+ }
+ }
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_cubicto: {
+ PathDescrCubicTo *nData = dynamic_cast<PathDescrCubicTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ RecCubicTo(curX, nData->start, nextX, nData->end, treshhold, 8);
+ descr_cmd[curP]->associated = AddPoint(nextX,false);
+ if ( descr_cmd[curP]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curP]->associated = 0;
+ } else {
+ descr_cmd[curP]->associated = descr_cmd[curP - 1]->associated;
+ }
+ }
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_arcto: {
+ PathDescrArcTo *nData = dynamic_cast<PathDescrArcTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ DoArc(curX, nextX, nData->rx, nData->ry, nData->angle, nData->large, nData->clockwise, treshhold);
+ descr_cmd[curP]->associated = AddPoint(nextX, false);
+ if ( descr_cmd[curP]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curP]->associated = 0;
+ } else {
+ descr_cmd[curP]->associated = descr_cmd[curP - 1]->associated;
+ }
+ }
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_bezierto: {
+ PathDescrBezierTo *nBData = dynamic_cast<PathDescrBezierTo *>(descr_cmd[curP]);
+ int nbInterm = nBData->nb;
+ nextX = nBData->p;
+ int curBD = curP;
+
+ curP++;
+ int ip = curP;
+ PathDescrIntermBezierTo *nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ if ( nbInterm == 1 ) {
+ Geom::Point const midX = nData->p;
+ RecBezierTo(midX, curX, nextX, treshhold, 8);
+ } else if ( nbInterm > 1 ) {
+ Geom::Point bx = curX;
+ Geom::Point dx = nData->p;
+ Geom::Point cx = 2 * bx - dx;
+
+ ip++;
+ nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ for (int k = 0; k < nbInterm - 1; k++) {
+ bx = cx;
+ cx = dx;
+
+ dx = nData->p;
+ ip++;
+ nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ Geom::Point stx = (bx + cx) / 2;
+ if ( k > 0 ) {
+ descr_cmd[ip - 2]->associated = AddPoint(stx, false);
+ if ( descr_cmd[ip - 2]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[ip - 2]->associated = 0;
+ } else {
+ descr_cmd[ip - 2]->associated = descr_cmd[ip - 3]->associated;
+ }
+ }
+ }
+
+ {
+ Geom::Point const mx = (cx + dx) / 2;
+ RecBezierTo(cx, stx, mx, treshhold, 8);
+ }
+ }
+
+ {
+ bx = cx;
+ cx = dx;
+
+ dx = nextX;
+ dx = 2 * dx - cx;
+
+ Geom::Point stx = (bx + cx) / 2;
+
+ descr_cmd[ip - 1]->associated = AddPoint(stx, false);
+ if ( descr_cmd[ip - 1]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[ip - 1]->associated = 0;
+ } else {
+ descr_cmd[ip - 1]->associated = descr_cmd[ip - 2]->associated;
+ }
+ }
+
+ {
+ Geom::Point mx = (cx + dx) / 2;
+ RecBezierTo(cx, stx, mx, treshhold, 8);
+ }
+ }
+ }
+
+ descr_cmd[curBD]->associated = AddPoint(nextX, false);
+ if ( descr_cmd[curBD]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curBD]->associated = 0;
+ } else {
+ descr_cmd[curBD]->associated = descr_cmd[curBD - 1]->associated;
+ }
+ }
+
+ // et on avance
+ curP += nbInterm;
+ break;
+ }
+ }
+
+ curX = nextX;
+ }
+}
+
+void Path::ConvertEvenLines(double treshhold)
+{
+ if ( descr_flags & descr_adding_bezier ) {
+ CancelBezier();
+ }
+
+ if ( descr_flags & descr_doing_subpath ) {
+ CloseSubpath();
+ }
+
+ SetBackData(false);
+ ResetPoints();
+ if ( descr_cmd.empty() ) {
+ return;
+ }
+
+ Geom::Point curX;
+ int curP = 1;
+ int lastMoveTo = 0;
+
+ // le moveto
+ {
+ int const firstTyp = descr_cmd[0]->getType();
+ if ( firstTyp == descr_moveto ) {
+ curX = dynamic_cast<PathDescrMoveTo *>(descr_cmd[0])->p;
+ } else {
+ curP = 0;
+ curX[0] = curX[1] = 0;
+ }
+ lastMoveTo = AddPoint(curX, true);
+ }
+ descr_cmd[0]->associated = lastMoveTo;
+
+ // et le reste, 1 par 1
+ while ( curP < int(descr_cmd.size()) ) {
+
+ int const nType = descr_cmd[curP]->getType();
+ Geom::Point nextX;
+
+ switch (nType) {
+ case descr_forced: {
+ descr_cmd[curP]->associated = AddForcedPoint(curX);
+ curP++;
+ break;
+ }
+
+ case descr_moveto: {
+ PathDescrMoveTo* nData = dynamic_cast<PathDescrMoveTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ lastMoveTo = AddPoint(nextX,true);
+ descr_cmd[curP]->associated = lastMoveTo;
+
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_close: {
+ nextX = pts[lastMoveTo].p;
+ {
+ Geom::Point nexcur;
+ nexcur = nextX - curX;
+ const double segL = Geom::L2(nexcur);
+ if ( (segL > treshhold) && (treshhold > 0) ) {
+ for (double i = treshhold; i < segL; i += treshhold) {
+ Geom::Point nX;
+ nX = (segL - i) * curX + i * nextX;
+ nX /= segL;
+ AddPoint(nX);
+ }
+ }
+ }
+
+ descr_cmd[curP]->associated = AddPoint(nextX,false);
+ if ( descr_cmd[curP]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curP]->associated = 0;
+ } else {
+ descr_cmd[curP]->associated = descr_cmd[curP - 1]->associated;
+ }
+ }
+ if ( descr_cmd[curP]->associated > 0 ) {
+ pts[descr_cmd[curP]->associated].closed = true;
+ }
+ curP++;
+ break;
+ }
+
+ case descr_lineto: {
+ PathDescrLineTo* nData = dynamic_cast<PathDescrLineTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ Geom::Point nexcur = nextX - curX;
+ const double segL = L2(nexcur);
+ if ( (segL > treshhold) && (treshhold > 0)) {
+ for (double i = treshhold; i < segL; i += treshhold) {
+ Geom::Point nX = ((segL - i) * curX + i * nextX) / segL;
+ AddPoint(nX);
+ }
+ }
+
+ descr_cmd[curP]->associated = AddPoint(nextX,false);
+ if ( descr_cmd[curP]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curP]->associated = 0;
+ } else {
+ descr_cmd[curP]->associated = descr_cmd[curP - 1]->associated;
+ }
+ }
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_cubicto: {
+ PathDescrCubicTo *nData = dynamic_cast<PathDescrCubicTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ RecCubicTo(curX, nData->start, nextX, nData->end, treshhold, 8, 4 * treshhold);
+ descr_cmd[curP]->associated = AddPoint(nextX, false);
+ if ( descr_cmd[curP]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curP]->associated = 0;
+ } else {
+ descr_cmd[curP]->associated = descr_cmd[curP - 1]->associated;
+ }
+ }
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_arcto: {
+ PathDescrArcTo *nData = dynamic_cast<PathDescrArcTo *>(descr_cmd[curP]);
+ nextX = nData->p;
+ DoArc(curX, nextX, nData->rx, nData->ry, nData->angle, nData->large, nData->clockwise, treshhold);
+ descr_cmd[curP]->associated =AddPoint(nextX, false);
+ if ( descr_cmd[curP]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curP]->associated = 0;
+ } else {
+ descr_cmd[curP]->associated = descr_cmd[curP - 1]->associated;
+ }
+ }
+
+ // et on avance
+ curP++;
+ break;
+ }
+
+ case descr_bezierto: {
+ PathDescrBezierTo *nBData = dynamic_cast<PathDescrBezierTo *>(descr_cmd[curP]);
+ int nbInterm = nBData->nb;
+ nextX = nBData->p;
+ int curBD = curP;
+
+ curP++;
+ int ip = curP;
+ PathDescrIntermBezierTo *nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ if ( nbInterm == 1 ) {
+ Geom::Point const midX = nData->p;
+ RecBezierTo(midX, curX, nextX, treshhold, 8, 4 * treshhold);
+ } else if ( nbInterm > 1 ) {
+ Geom::Point bx = curX;
+ Geom::Point dx = nData->p;
+ Geom::Point cx = 2 * bx - dx;
+
+ ip++;
+ nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ for (int k = 0; k < nbInterm - 1; k++) {
+ bx = cx;
+ cx = dx;
+ dx = nData->p;
+
+ ip++;
+ nData = dynamic_cast<PathDescrIntermBezierTo *>(descr_cmd[ip]);
+
+ Geom::Point stx = (bx+cx) / 2;
+ if ( k > 0 ) {
+ descr_cmd[ip - 2]->associated = AddPoint(stx, false);
+ if ( descr_cmd[ip - 2]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[ip- 2]->associated = 0;
+ } else {
+ descr_cmd[ip - 2]->associated = descr_cmd[ip - 3]->associated;
+ }
+ }
+ }
+
+ {
+ Geom::Point const mx = (cx + dx) / 2;
+ RecBezierTo(cx, stx, mx, treshhold, 8, 4 * treshhold);
+ }
+ }
+
+ {
+ bx = cx;
+ cx = dx;
+
+ dx = nextX;
+ dx = 2 * dx - cx;
+
+ Geom::Point const stx = (bx + cx) / 2;
+
+ descr_cmd[ip - 1]->associated = AddPoint(stx, false);
+ if ( descr_cmd[ip - 1]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[ip - 1]->associated = 0;
+ } else {
+ descr_cmd[ip - 1]->associated = descr_cmd[ip - 2]->associated;
+ }
+ }
+
+ {
+ Geom::Point const mx = (cx + dx) / 2;
+ RecBezierTo(cx, stx, mx, treshhold, 8, 4 * treshhold);
+ }
+ }
+ }
+
+ descr_cmd[curBD]->associated = AddPoint(nextX, false);
+ if ( descr_cmd[curBD]->associated < 0 ) {
+ if ( curP == 0 ) {
+ descr_cmd[curBD]->associated = 0;
+ } else {
+ descr_cmd[curBD]->associated = descr_cmd[curBD - 1]->associated;
+ }
+ }
+
+ // et on avance
+ curP += nbInterm;
+ break;
+ }
+ }
+ if ( Geom::LInfty(curX - nextX) > 0.00001 ) {
+ curX = nextX;
+ }
+ }
+}
+
+const Geom::Point Path::PrevPoint(int i) const
+{
+ /* TODO: I suspect this should assert `(unsigned) i < descr_nb'. We can probably change
+ the argument to unsigned. descr_nb should probably be changed to unsigned too. */
+ g_assert( i >= 0 );
+ switch ( descr_cmd[i]->getType() ) {
+ case descr_moveto: {
+ PathDescrMoveTo *nData = dynamic_cast<PathDescrMoveTo *>(descr_cmd[i]);
+ return nData->p;
+ }
+ case descr_lineto: {
+ PathDescrLineTo *nData = dynamic_cast<PathDescrLineTo *>(descr_cmd[i]);
+ return nData->p;
+ }
+ case descr_arcto: {
+ PathDescrArcTo *nData = dynamic_cast<PathDescrArcTo *>(descr_cmd[i]);
+ return nData->p;
+ }
+ case descr_cubicto: {
+ PathDescrCubicTo *nData = dynamic_cast<PathDescrCubicTo *>(descr_cmd[i]);
+ return nData->p;
+ }
+ case descr_bezierto: {
+ PathDescrBezierTo *nData = dynamic_cast<PathDescrBezierTo *>(descr_cmd[i]);
+ return nData->p;
+ }
+ case descr_interm_bezier:
+ case descr_close:
+ case descr_forced:
+ return PrevPoint(i - 1);
+ default:
+ g_assert_not_reached();
+ return Geom::Point(0, 0);
+ }
+}
+
+// utilitaries: given a quadratic bezier curve (start point, control point, end point, ie that's a clamped curve),
+// and an abcissis on it, get the point with that abcissis.
+// warning: it's NOT a curvilign abcissis (or whatever you call that in english), so "t" is NOT the length of "start point"->"result point"
+void Path::QuadraticPoint(double t, Geom::Point &oPt,
+ const Geom::Point &iS, const Geom::Point &iM, const Geom::Point &iE)
+{
+ Geom::Point const ax = iE - 2 * iM + iS;
+ Geom::Point const bx = 2 * iM - 2 * iS;
+ Geom::Point const cx = iS;
+
+ oPt = t * t * ax + t * bx + cx;
+}
+// idem for cubic bezier patch
+void Path::CubicTangent(double t, Geom::Point &oPt, const Geom::Point &iS, const Geom::Point &isD,
+ const Geom::Point &iE, const Geom::Point &ieD)
+{
+ Geom::Point const ax = ieD - 2 * iE + 2 * iS + isD;
+ Geom::Point const bx = 3 * iE - ieD - 2 * isD - 3 * iS;
+ Geom::Point const cx = isD;
+
+ oPt = 3 * t * t * ax + 2 * t * bx + cx;
+}
+
+// extract interesting info of a SVG arc description
+static void ArcAnglesAndCenter(Geom::Point const &iS, Geom::Point const &iE,
+ double rx, double ry, double angle,
+ bool large, bool wise,
+ double &sang, double &eang, Geom::Point &dr);
+
+void Path::ArcAngles(const Geom::Point &iS, const Geom::Point &iE,
+ double rx, double ry, double angle, bool large, bool wise, double &sang, double &eang)
+{
+ Geom::Point dr;
+ ArcAnglesAndCenter(iS, iE, rx, ry, angle, large, wise, sang, eang, dr);
+}
+
+/* N.B. If iS == iE then sang,eang,dr each become NaN. Probably a bug. */
+static void ArcAnglesAndCenter(Geom::Point const &iS, Geom::Point const &iE,
+ double rx, double ry, double angle,
+ bool large, bool wise,
+ double &sang, double &eang, Geom::Point &dr)
+{
+ Geom::Point se = iE - iS;
+ Geom::Point ca(cos(angle), sin(angle));
+ Geom::Point cse(dot(ca, se), cross(ca, se));
+ cse[0] /= rx;
+ cse[1] /= ry;
+ double const lensq = dot(cse,cse);
+ Geom::Point csd = ( ( lensq < 4
+ ? sqrt( 1/lensq - .25 )
+ : 0.0 )
+ * cse.ccw() );
+
+ Geom::Point ra = -csd - 0.5 * cse;
+ if ( ra[0] <= -1 ) {
+ sang = M_PI;
+ } else if ( ra[0] >= 1 ) {
+ sang = 0;
+ } else {
+ sang = acos(ra[0]);
+ if ( ra[1] < 0 ) {
+ sang = 2 * M_PI - sang;
+ }
+ }
+
+ ra = -csd + 0.5 * cse;
+ if ( ra[0] <= -1 ) {
+ eang = M_PI;
+ } else if ( ra[0] >= 1 ) {
+ eang = 0;
+ } else {
+ eang = acos(ra[0]);
+ if ( ra[1] < 0 ) {
+ eang = 2 * M_PI - eang;
+ }
+ }
+
+ csd[0] *= rx;
+ csd[1] *= ry;
+ ca[1] = -ca[1]; // because it's the inverse rotation
+
+ dr[0] = dot(ca, csd);
+ dr[1] = cross(ca, csd);
+
+ ca[1] = -ca[1];
+
+ if ( wise ) {
+
+ if (large) {
+ dr = -dr;
+ double swap = eang;
+ eang = sang;
+ sang = swap;
+ eang += M_PI;
+ sang += M_PI;
+ if ( eang >= 2*M_PI ) {
+ eang -= 2*M_PI;
+ }
+ if ( sang >= 2*M_PI ) {
+ sang -= 2*M_PI;
+ }
+ }
+
+ } else {
+ if (!large) {
+ dr = -dr;
+ double swap = eang;
+ eang = sang;
+ sang = swap;
+ eang += M_PI;
+ sang += M_PI;
+ if ( eang >= 2*M_PI ) {
+ eang -= 2 * M_PI;
+ }
+ if ( sang >= 2*M_PI ) {
+ sang -= 2 * M_PI;
+ }
+ }
+ }
+
+ dr += 0.5 * (iS + iE);
+}
+
+
+
+void Path::DoArc(Geom::Point const &iS, Geom::Point const &iE,
+ double const rx, double const ry, double const angle,
+ bool const large, bool const wise, double const /*tresh*/)
+{
+ /* TODO: Check that our behaviour is standards-conformant if iS and iE are (much) further
+ apart than the diameter. Also check that we do the right thing for negative radius.
+ (Same for the other DoArc functions in this file.) */
+ if ( rx <= 0.0001 || ry <= 0.0001 ) {
+ return;
+ // We always add a lineto afterwards, so this is fine.
+ // [on ajoute toujours un lineto apres, donc c bon]
+ }
+
+ double sang;
+ double eang;
+ Geom::Point dr_temp;
+ ArcAnglesAndCenter(iS, iE, rx, ry, angle*M_PI/180.0, large, wise, sang, eang, dr_temp);
+ Geom::Point dr = dr_temp;
+ /* TODO: This isn't as good numerically as treating iS and iE as primary. E.g. consider
+ the case of low curvature (i.e. very large radius). */
+
+ Geom::Scale const ar(rx, ry);
+ Geom::Rotate cb(sang);
+ Geom::Rotate cbangle(angle*M_PI/180.0);
+
+ if (wise) {
+
+ double const incr = -0.1/sqrt(ar.vector().length());
+ if ( sang < eang ) {
+ sang += 2*M_PI;
+ }
+ Geom::Rotate const omega(incr);
+ for (double b = sang + incr ; b > eang ; b += incr) {
+ cb = omega * cb;
+ AddPoint( cb.vector() * ar * cbangle + dr );
+ }
+
+ } else {
+
+ double const incr = 0.1/sqrt(ar.vector().length());
+ if ( sang > eang ) {
+ sang -= 2*M_PI;
+ }
+ Geom::Rotate const omega(incr);
+ for (double b = sang + incr ; b < eang ; b += incr) {
+ cb = omega * cb;
+ AddPoint( cb.vector() * ar * cbangle + dr);
+ }
+ }
+}
+
+
+void Path::RecCubicTo( Geom::Point const &iS, Geom::Point const &isD,
+ Geom::Point const &iE, Geom::Point const &ieD,
+ double tresh, int lev, double maxL)
+{
+ Geom::Point se = iE - iS;
+ const double dC = Geom::L2(se);
+ if ( dC < 0.01 ) {
+
+ const double sC = dot(isD,isD);
+ const double eC = dot(ieD,ieD);
+ if ( sC < tresh && eC < tresh ) {
+ return;
+ }
+
+ } else {
+ const double sC = fabs(cross(se, isD)) / dC;
+ const double eC = fabs(cross(se, ieD)) / dC;
+ if ( sC < tresh && eC < tresh ) {
+ // presque tt droit -> attention si on nous demande de bien subdiviser les petits segments
+ if ( maxL > 0 && dC > maxL ) {
+ if ( lev <= 0 ) {
+ return;
+ }
+ Geom::Point m = 0.5 * (iS + iE) + 0.125 * (isD - ieD);
+ Geom::Point md = 0.75 * (iE - iS) - 0.125 * (isD + ieD);
+
+ Geom::Point hisD = 0.5 * isD;
+ Geom::Point hieD = 0.5 * ieD;
+
+ RecCubicTo(iS, hisD, m, md, tresh, lev - 1, maxL);
+ AddPoint(m);
+ RecCubicTo(m, md, iE, hieD, tresh, lev - 1,maxL);
+ }
+ return;
+ }
+ }
+
+ if ( lev <= 0 ) {
+ return;
+ }
+
+ {
+ Geom::Point m = 0.5 * (iS + iE) + 0.125 * (isD - ieD);
+ Geom::Point md = 0.75 * (iE - iS) - 0.125 * (isD + ieD);
+
+ Geom::Point hisD = 0.5 * isD;
+ Geom::Point hieD = 0.5 * ieD;
+
+ RecCubicTo(iS, hisD, m, md, tresh, lev - 1, maxL);
+ AddPoint(m);
+ RecCubicTo(m, md, iE, hieD, tresh, lev - 1,maxL);
+ }
+}
+
+
+
+void Path::RecBezierTo(const Geom::Point &iP,
+ const Geom::Point &iS,
+ const Geom::Point &iE,
+ double tresh, int lev, double maxL)
+{
+ if ( lev <= 0 ) {
+ return;
+ }
+
+ Geom::Point ps = iS - iP;
+ Geom::Point pe = iE - iP;
+ Geom::Point se = iE - iS;
+ double s = fabs(cross(pe, ps));
+ if ( s < tresh ) {
+ const double l = L2(se);
+ if ( maxL > 0 && l > maxL ) {
+ const Geom::Point m = 0.25 * (iS + iE + 2 * iP);
+ Geom::Point md = 0.5 * (iS + iP);
+ RecBezierTo(md, iS, m, tresh, lev - 1, maxL);
+ AddPoint(m);
+ md = 0.5 * (iP + iE);
+ RecBezierTo(md, m, iE, tresh, lev - 1, maxL);
+ }
+ return;
+ }
+
+ {
+ const Geom::Point m = 0.25 * (iS + iE + 2 * iP);
+ Geom::Point md = 0.5 * (iS + iP);
+ RecBezierTo(md, iS, m, tresh, lev - 1, maxL);
+ AddPoint(m);
+ md = 0.5 * (iP + iE);
+ RecBezierTo(md, m, iE, tresh, lev - 1, maxL);
+ }
+}
+
+
+void Path::DoArc(Geom::Point const &iS, Geom::Point const &iE,
+ double const rx, double const ry, double const angle,
+ bool const large, bool const wise, double const /*tresh*/, int const piece)
+{
+ /* TODO: Check that our behaviour is standards-conformant if iS and iE are (much) further
+ apart than the diameter. Also check that we do the right thing for negative radius.
+ (Same for the other DoArc functions in this file.) */
+ if ( rx <= 0.0001 || ry <= 0.0001 ) {
+ return;
+ // We always add a lineto afterwards, so this is fine.
+ // [on ajoute toujours un lineto apres, donc c bon]
+ }
+
+ double sang;
+ double eang;
+ Geom::Point dr_temp;
+ ArcAnglesAndCenter(iS, iE, rx, ry, angle*M_PI/180.0, large, wise, sang, eang, dr_temp);
+ Geom::Point dr = dr_temp;
+ /* TODO: This isn't as good numerically as treating iS and iE as primary. E.g. consider
+ the case of low curvature (i.e. very large radius). */
+
+ Geom::Scale const ar(rx, ry);
+ Geom::Rotate cb(sang);
+ Geom::Rotate cbangle(angle*M_PI/180.0);
+
+ if (wise) {
+ double const incr = -0.1/sqrt(ar.vector().length());
+ if ( sang < eang ) {
+ sang += 2*M_PI;
+ }
+ Geom::Rotate const omega(incr);
+ for (double b = sang + incr; b > eang; b += incr) {
+ cb = omega * cb;
+ AddPoint(cb.vector() * ar * cbangle + dr, piece, (sang - b) / (sang - eang));
+ }
+
+ } else {
+
+ double const incr = 0.1/sqrt(ar.vector().length());
+ if ( sang > eang ) {
+ sang -= 2 * M_PI;
+ }
+ Geom::Rotate const omega(incr);
+ for (double b = sang + incr ; b < eang ; b += incr) {
+ cb = omega * cb;
+ AddPoint(cb.vector() * ar * cbangle + dr, piece, (b - sang) / (eang - sang));
+ }
+ }
+}
+
+void Path::RecCubicTo(Geom::Point const &iS, Geom::Point const &isD,
+ Geom::Point const &iE, Geom::Point const &ieD,
+ double tresh, int lev, double st, double et, int piece)
+{
+ const Geom::Point se = iE - iS;
+ const double dC = Geom::L2(se);
+ if ( dC < 0.01 ) {
+ const double sC = dot(isD, isD);
+ const double eC = dot(ieD, ieD);
+ if ( sC < tresh && eC < tresh ) {
+ return;
+ }
+ } else {
+ const double sC = fabs(cross(se, isD)) / dC;
+ const double eC = fabs(cross(se, ieD)) / dC;
+ if ( sC < tresh && eC < tresh ) {
+ return;
+ }
+ }
+
+ if ( lev <= 0 ) {
+ return;
+ }
+
+ Geom::Point m = 0.5 * (iS + iE) + 0.125 * (isD - ieD);
+ Geom::Point md = 0.75 * (iE - iS) - 0.125 * (isD + ieD);
+ double mt = (st + et) / 2;
+
+ Geom::Point hisD = 0.5 * isD;
+ Geom::Point hieD = 0.5 * ieD;
+
+ RecCubicTo(iS, hisD, m, md, tresh, lev - 1, st, mt, piece);
+ AddPoint(m, piece, mt);
+ RecCubicTo(m, md, iE, hieD, tresh, lev - 1, mt, et, piece);
+
+}
+
+
+
+void Path::RecBezierTo(Geom::Point const &iP,
+ Geom::Point const &iS,
+ Geom::Point const &iE,
+ double tresh, int lev, double st, double et, int piece)
+{
+ if ( lev <= 0 ) {
+ return;
+ }
+
+ Geom::Point ps = iS - iP;
+ Geom::Point pe = iE - iP;
+ const double s = fabs(cross(pe, ps));
+ if ( s < tresh ) {
+ return;
+ }
+
+ {
+ const double mt = (st + et) / 2;
+ const Geom::Point m = 0.25 * (iS + iE + 2 * iP);
+ RecBezierTo(0.5 * (iS + iP), iS, m, tresh, lev - 1, st, mt, piece);
+ AddPoint(m, piece, mt);
+ RecBezierTo(0.5 * (iP + iE), m, iE, tresh, lev - 1, mt, et, piece);
+ }
+}
+
+
+
+void Path::DoArc(Geom::Point const &iS, Geom::Point const &iE,
+ double const rx, double const ry, double const angle,
+ bool const large, bool const wise, double const /*tresh*/,
+ int const piece, offset_orig &/*orig*/)
+{
+ // Will never arrive here, as offsets are made of cubics.
+ // [on n'arrivera jamais ici, puisque les offsets sont fait de cubiques]
+ /* TODO: Check that our behaviour is standards-conformant if iS and iE are (much) further
+ apart than the diameter. Also check that we do the right thing for negative radius.
+ (Same for the other DoArc functions in this file.) */
+ if ( rx <= 0.0001 || ry <= 0.0001 ) {
+ return;
+ // We always add a lineto afterwards, so this is fine.
+ // [on ajoute toujours un lineto apres, donc c bon]
+ }
+
+ double sang;
+ double eang;
+ Geom::Point dr_temp;
+ ArcAnglesAndCenter(iS, iE, rx, ry, angle*M_PI/180.0, large, wise, sang, eang, dr_temp);
+ Geom::Point dr = dr_temp;
+ /* TODO: This isn't as good numerically as treating iS and iE as primary. E.g. consider
+ the case of low curvature (i.e. very large radius). */
+
+ Geom::Scale const ar(rx, ry);
+ Geom::Rotate cb(sang);
+ Geom::Rotate cbangle(angle*M_PI/180.0);
+ if (wise) {
+
+ double const incr = -0.1/sqrt(ar.vector().length());
+ if ( sang < eang ) {
+ sang += 2*M_PI;
+ }
+ Geom::Rotate const omega(incr);
+ for (double b = sang + incr; b > eang ;b += incr) {
+ cb = omega * cb;
+ AddPoint(cb.vector() * ar * cbangle + dr, piece, (sang - b) / (sang - eang));
+ }
+
+ } else {
+ double const incr = 0.1/sqrt(ar.vector().length());
+ if ( sang > eang ) {
+ sang -= 2*M_PI;
+ }
+ Geom::Rotate const omega(incr);
+ for (double b = sang + incr ; b < eang ; b += incr) {
+ cb = omega * cb;
+ AddPoint(cb.vector() * ar * cbangle + dr, piece, (b - sang) / (eang - sang));
+ }
+ }
+}
+
+
+void Path::RecCubicTo(Geom::Point const &iS, Geom::Point const &isD,
+ Geom::Point const &iE, Geom::Point const &ieD,
+ double tresh, int lev, double st, double et,
+ int piece, offset_orig &orig)
+{
+ const Geom::Point se = iE - iS;
+ const double dC = Geom::L2(se);
+ bool doneSub = false;
+ if ( dC < 0.01 ) {
+ const double sC = dot(isD, isD);
+ const double eC = dot(ieD, ieD);
+ if ( sC < tresh && eC < tresh ) {
+ return;
+ }
+ } else {
+ const double sC = fabs(cross(se, isD)) / dC;
+ const double eC = fabs(cross(se, ieD)) / dC;
+ if ( sC < tresh && eC < tresh ) {
+ doneSub = true;
+ }
+ }
+
+ if ( lev <= 0 ) {
+ doneSub = true;
+ }
+
+ // test des inversions
+ bool stInv = false;
+ bool enInv = false;
+ {
+ Geom::Point os_pos;
+ Geom::Point os_tgt;
+ Geom::Point oe_pos;
+ Geom::Point oe_tgt;
+
+ orig.orig->PointAndTangentAt(orig.piece, orig.tSt * (1 - st) + orig.tEn * st, os_pos, os_tgt);
+ orig.orig->PointAndTangentAt(orig.piece, orig.tSt * (1 - et) + orig.tEn * et, oe_pos, oe_tgt);
+
+
+ Geom::Point n_tgt = isD;
+ double si = dot(n_tgt, os_tgt);
+ if ( si < 0 ) {
+ stInv = true;
+ }
+ n_tgt = ieD;
+ si = dot(n_tgt, oe_tgt);
+ if ( si < 0 ) {
+ enInv = true;
+ }
+ if ( stInv && enInv ) {
+
+ AddPoint(os_pos, -1, 0.0);
+ AddPoint(iE, piece, et);
+ AddPoint(iS, piece, st);
+ AddPoint(oe_pos, -1, 0.0);
+ return;
+
+ } else if ( ( stInv && !enInv ) || ( !stInv && enInv ) ) {
+ return;
+ }
+
+ }
+
+ if ( ( !stInv && !enInv && doneSub ) || lev <= 0 ) {
+ return;
+ }
+
+ {
+ const Geom::Point m = 0.5 * (iS+iE) + 0.125 * (isD - ieD);
+ const Geom::Point md = 0.75 * (iE - iS) - 0.125 * (isD + ieD);
+ const double mt = (st + et) / 2;
+ const Geom::Point hisD = 0.5 * isD;
+ const Geom::Point hieD = 0.5 * ieD;
+
+ RecCubicTo(iS, hisD, m, md, tresh, lev - 1, st, mt, piece, orig);
+ AddPoint(m, piece, mt);
+ RecCubicTo(m, md, iE, hieD, tresh, lev - 1, mt, et, piece, orig);
+ }
+}
+
+
+
+void Path::RecBezierTo(Geom::Point const &iP, Geom::Point const &iS,Geom::Point const &iE,
+ double tresh, int lev, double st, double et,
+ int piece, offset_orig& orig)
+{
+ bool doneSub = false;
+ if ( lev <= 0 ) {
+ return;
+ }
+
+ const Geom::Point ps = iS - iP;
+ const Geom::Point pe = iE - iP;
+ const double s = fabs(cross(pe, ps));
+ if ( s < tresh ) {
+ doneSub = true ;
+ }
+
+ // test des inversions
+ bool stInv = false;
+ bool enInv = false;
+ {
+ Geom::Point os_pos;
+ Geom::Point os_tgt;
+ Geom::Point oe_pos;
+ Geom::Point oe_tgt;
+ Geom::Point n_tgt;
+ Geom::Point n_pos;
+
+ double n_len;
+ double n_rad;
+ PathDescrIntermBezierTo mid(iP);
+ PathDescrBezierTo fin(iE, 1);
+
+ TangentOnBezAt(0.0, iS, mid, fin, false, n_pos, n_tgt, n_len, n_rad);
+ orig.orig->PointAndTangentAt(orig.piece, orig.tSt * (1 - st) + orig.tEn * st, os_pos, os_tgt);
+ double si = dot(n_tgt, os_tgt);
+ if ( si < 0 ) {
+ stInv = true;
+ }
+
+ TangentOnBezAt(1.0, iS, mid, fin, false, n_pos, n_tgt, n_len, n_rad);
+ orig.orig->PointAndTangentAt(orig.piece, orig.tSt * (1 - et) + orig.tEn * et, oe_pos, oe_tgt);
+ si = dot(n_tgt, oe_tgt);
+ if ( si < 0 ) {
+ enInv = true;
+ }
+
+ if ( stInv && enInv ) {
+ AddPoint(os_pos, -1, 0.0);
+ AddPoint(iE, piece, et);
+ AddPoint(iS, piece, st);
+ AddPoint(oe_pos, -1, 0.0);
+ return;
+ }
+ }
+
+ if ( !stInv && !enInv && doneSub ) {
+ return;
+ }
+
+ {
+ double mt = (st + et) / 2;
+ Geom::Point m = 0.25 * (iS + iE + 2 * iP);
+ Geom::Point md = 0.5 * (iS + iP);
+ RecBezierTo(md, iS, m, tresh, lev - 1, st, mt, piece, orig);
+ AddPoint(m, piece, mt);
+ md = 0.5 * (iP + iE);
+ RecBezierTo(md, m, iE, tresh, lev - 1, mt, et, piece, orig);
+ }
+}
+
+
+/*
+ * put a polyline in a Shape instance, for further fun
+ * pathID is the ID you want this Path instance to be associated with, for when you're going to recompose the polyline
+ * in a path description ( you need to have prepared the back data for that, of course)
+ */
+
+void Path::Fill(Shape* dest, int pathID, bool justAdd, bool closeIfNeeded, bool invert)
+{
+ if ( dest == nullptr ) {
+ return;
+ }
+
+ if ( justAdd == false ) {
+ dest->Reset(pts.size(), pts.size());
+ }
+
+ if ( pts.size() <= 1 ) {
+ return;
+ }
+
+ int first = dest->numberOfPoints();
+
+ if ( back ) {
+ dest->MakeBackData(true);
+ }
+
+ if ( invert ) {
+ if ( back ) {
+ {
+ // invert && back && !weighted
+ for (auto & pt : pts) {
+ dest->AddPoint(pt.p);
+ }
+ int lastM = 0;
+ int curP = 1;
+ int pathEnd = 0;
+ bool closed = false;
+ int lEdge = -1;
+
+ while ( curP < int(pts.size()) ) {
+ int sbp = curP;
+ int lm = lastM;
+ int prp = pathEnd;
+
+ if ( pts[sbp].isMoveTo == polyline_moveto ) {
+
+ if ( closeIfNeeded ) {
+ if ( closed && lEdge >= 0 ) {
+ dest->DisconnectStart(lEdge);
+ dest->ConnectStart(first + lastM, lEdge);
+ } else {
+ lEdge = dest->AddEdge(first + lastM, first+pathEnd);
+ if ( lEdge >= 0 ) {
+ dest->ebData[lEdge].pathID = pathID;
+ dest->ebData[lEdge].pieceID = pts[lm].piece;
+ dest->ebData[lEdge].tSt = 1.0;
+ dest->ebData[lEdge].tEn = 0.0;
+ }
+ }
+ }
+
+ lastM = curP;
+ pathEnd = curP;
+ closed = false;
+ lEdge = -1;
+
+ } else {
+
+ if ( Geom::LInfty(pts[sbp].p - pts[prp].p) >= 0.00001 ) {
+ lEdge = dest->AddEdge(first + curP, first + pathEnd);
+ if ( lEdge >= 0 ) {
+ dest->ebData[lEdge].pathID = pathID;
+ dest->ebData[lEdge].pieceID = pts[sbp].piece;
+ if ( pts[sbp].piece == pts[prp].piece ) {
+ dest->ebData[lEdge].tSt = pts[sbp].t;
+ dest->ebData[lEdge].tEn = pts[prp].t;
+ } else {
+ dest->ebData[lEdge].tSt = pts[sbp].t;
+ dest->ebData[lEdge].tEn = 0.0;
+ }
+ }
+ pathEnd = curP;
+ if ( Geom::LInfty(pts[sbp].p - pts[lm].p) < 0.00001 ) {
+ closed = true;
+ } else {
+ closed = false;
+ }
+ }
+ }
+
+ curP++;
+ }
+
+ if ( closeIfNeeded ) {
+ if ( closed && lEdge >= 0 ) {
+ dest->DisconnectStart(lEdge);
+ dest->ConnectStart(first + lastM, lEdge);
+ } else {
+ int lm = lastM;
+ lEdge = dest->AddEdge(first + lastM, first + pathEnd);
+ if ( lEdge >= 0 ) {
+ dest->ebData[lEdge].pathID = pathID;
+ dest->ebData[lEdge].pieceID = pts[lm].piece;
+ dest->ebData[lEdge].tSt = 1.0;
+ dest->ebData[lEdge].tEn = 0.0;
+ }
+ }
+ }
+ }
+
+ } else {
+
+ {
+ // invert && !back && !weighted
+ for (auto & pt : pts) {
+ dest->AddPoint(pt.p);
+ }
+ int lastM = 0;
+ int curP = 1;
+ int pathEnd = 0;
+ bool closed = false;
+ int lEdge = -1;
+ while ( curP < int(pts.size()) ) {
+ int sbp = curP;
+ int lm = lastM;
+ int prp = pathEnd;
+ if ( pts[sbp].isMoveTo == polyline_moveto ) {
+ if ( closeIfNeeded ) {
+ if ( closed && lEdge >= 0 ) {
+ dest->DisconnectStart(lEdge);
+ dest->ConnectStart(first + lastM, lEdge);
+ } else {
+ dest->AddEdge(first + lastM, first + pathEnd);
+ }
+ }
+ lastM = curP;
+ pathEnd = curP;
+ closed = false;
+ lEdge = -1;
+ } else {
+ if ( Geom::LInfty(pts[sbp].p - pts[prp].p) >= 0.00001 ) {
+ lEdge = dest->AddEdge(first+curP, first+pathEnd);
+ pathEnd = curP;
+ if ( Geom::LInfty(pts[sbp].p - pts[lm].p) < 0.00001 ) {
+ closed = true;
+ } else {
+ closed = false;
+ }
+ }
+ }
+ curP++;
+ }
+
+ if ( closeIfNeeded ) {
+ if ( closed && lEdge >= 0 ) {
+ dest->DisconnectStart(lEdge);
+ dest->ConnectStart(first + lastM, lEdge);
+ } else {
+ dest->AddEdge(first + lastM, first + pathEnd);
+ }
+ }
+
+ }
+ }
+
+ } else {
+
+ if ( back ) {
+ {
+ // !invert && back && !weighted
+ for (auto & pt : pts) {
+ dest->AddPoint(pt.p);
+ }
+
+ int lastM = 0;
+ int curP = 1;
+ int pathEnd = 0;
+ bool closed = false;
+ int lEdge = -1;
+ while ( curP < int(pts.size()) ) {
+ int sbp = curP;
+ int lm = lastM;
+ int prp = pathEnd;
+ if ( pts[sbp].isMoveTo == polyline_moveto ) {
+ if ( closeIfNeeded ) {
+ if ( closed && lEdge >= 0 ) {
+ dest->DisconnectEnd(lEdge);
+ dest->ConnectEnd(first + lastM, lEdge);
+ } else {
+ lEdge = dest->AddEdge(first + pathEnd, first+lastM);
+ if ( lEdge >= 0 ) {
+ dest->ebData[lEdge].pathID = pathID;
+ dest->ebData[lEdge].pieceID = pts[lm].piece;
+ dest->ebData[lEdge].tSt = 0.0;
+ dest->ebData[lEdge].tEn = 1.0;
+ }
+ }
+ }
+ lastM = curP;
+ pathEnd = curP;
+ closed = false;
+ lEdge = -1;
+ } else {
+ if ( Geom::LInfty(pts[sbp].p - pts[prp].p) >= 0.00001 ) {
+ lEdge = dest->AddEdge(first + pathEnd, first + curP);
+ dest->ebData[lEdge].pathID = pathID;
+ dest->ebData[lEdge].pieceID = pts[sbp].piece;
+ if ( pts[sbp].piece == pts[prp].piece ) {
+ dest->ebData[lEdge].tSt = pts[prp].t;
+ dest->ebData[lEdge].tEn = pts[sbp].t;
+ } else {
+ dest->ebData[lEdge].tSt = 0.0;
+ dest->ebData[lEdge].tEn = pts[sbp].t;
+ }
+ pathEnd = curP;
+ if ( Geom::LInfty(pts[sbp].p - pts[lm].p) < 0.00001 ) {
+ closed = true;
+ } else {
+ closed = false;
+ }
+ }
+ }
+ curP++;
+ }
+
+ if ( closeIfNeeded ) {
+ if ( closed && lEdge >= 0 ) {
+ dest->DisconnectEnd(lEdge);
+ dest->ConnectEnd(first + lastM, lEdge);
+ } else {
+ int lm = lastM;
+ lEdge = dest->AddEdge(first + pathEnd, first + lastM);
+ if ( lEdge >= 0 ) {
+ dest->ebData[lEdge].pathID = pathID;
+ dest->ebData[lEdge].pieceID = pts[lm].piece;
+ dest->ebData[lEdge].tSt = 0.0;
+ dest->ebData[lEdge].tEn = 1.0;
+ }
+ }
+ }
+ }
+
+ } else {
+ {
+ // !invert && !back && !weighted
+ for (auto & pt : pts) {
+ dest->AddPoint(pt.p);
+ }
+
+ int lastM = 0;
+ int curP = 1;
+ int pathEnd = 0;
+ bool closed = false;
+ int lEdge = -1;
+ while ( curP < int(pts.size()) ) {
+ int sbp = curP;
+ int lm = lastM;
+ int prp = pathEnd;
+ if ( pts[sbp].isMoveTo == polyline_moveto ) {
+ if ( closeIfNeeded ) {
+ if ( closed && lEdge >= 0 ) {
+ dest->DisconnectEnd(lEdge);
+ dest->ConnectEnd(first + lastM, lEdge);
+ } else {
+ dest->AddEdge(first + pathEnd, first + lastM);
+ }
+ }
+ lastM = curP;
+ pathEnd = curP;
+ closed = false;
+ lEdge = -1;
+ } else {
+ if ( Geom::LInfty(pts[sbp].p - pts[prp].p) >= 0.00001 ) {
+ lEdge = dest->AddEdge(first+pathEnd, first+curP);
+ pathEnd = curP;
+ if ( Geom::LInfty(pts[sbp].p - pts[lm].p) < 0.00001 ) {
+ closed = true;
+ } else {
+ closed = false;
+ }
+ }
+ }
+ curP++;
+ }
+
+ if ( closeIfNeeded ) {
+ if ( closed && lEdge >= 0 ) {
+ dest->DisconnectEnd(lEdge);
+ dest->ConnectEnd(first + lastM, lEdge);
+ } else {
+ dest->AddEdge(first + pathEnd, first + lastM);
+ }
+ }
+
+ }
+ }
+ }
+}
+
+/*
+ Local Variables:
+ mode:c++
+ c-file-style:"stroustrup"
+ c-file-offsets:((innamespace . 0)(inline-open . 0)(case-label . +))
+ indent-tabs-mode:nil
+ fill-column:99
+ End:
+*/
+// vim: filetype=cpp:expandtab:shiftwidth=4:tabstop=8:softtabstop=4 :
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 00:28:55 +0000