Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 280 insertions, 0 deletions

diff --git a/include/rtl/tencinfo.h b/include/rtl/tencinfo.h
new file mode 100644
index 000000000..74c3bb04f
--- /dev/null
+++ b/include/rtl/tencinfo.h
@@ -0,0 +1,280 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_RTL_TENCINFO_H
+#define INCLUDED_RTL_TENCINFO_H
+
+#include "sal/config.h"
+
+#include "rtl/textenc.h"
+#include "sal/saldllapi.h"
+#include "sal/types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See rtl_TextEncodingInfo.Flags below for documentation on these values:
+#define RTL_TEXTENCODING_INFO_CONTEXT   ((sal_uInt32)0x00000001)
+#define RTL_TEXTENCODING_INFO_ASCII     ((sal_uInt32)0x00000002)
+#define RTL_TEXTENCODING_INFO_UNICODE   ((sal_uInt32)0x00000004)
+#define RTL_TEXTENCODING_INFO_MULTIBYTE ((sal_uInt32)0x00000008)
+#define RTL_TEXTENCODING_INFO_R2L       ((sal_uInt32)0x00000010)
+#define RTL_TEXTENCODING_INFO_7BIT      ((sal_uInt32)0x00000020)
+#define RTL_TEXTENCODING_INFO_SYMBOL    ((sal_uInt32)0x00000040)
+#define RTL_TEXTENCODING_INFO_MIME      ((sal_uInt32)0x00000080)
+
+/** Information about a text encoding.
+ */
+typedef struct _rtl_TextEncodingInfo
+{
+    /** The size (in bytes) of this structure.  Should be 12.
+     */
+    sal_uInt32          StructSize;
+
+    /** The minimum number of bytes needed to encode any character in the
+        given encoding.
+
+        Can be rather meaningless for encodings that encode global state along
+        with the characters (e.g., ISO-2022 encodings).
+     */
+    sal_uInt8           MinimumCharSize;
+
+    /** The maximum number of bytes needed to encode any character in the
+        given encoding.
+
+        Can be rather meaningless for encodings that encode global state along
+        with the characters (e.g., ISO-2022 encodings).
+     */
+    sal_uInt8           MaximumCharSize;
+
+    /** The average number of bytes needed to encode a character in the given
+        encoding.
+     */
+    sal_uInt8           AverageCharSize;
+
+    /** An unused byte, for padding.
+     */
+    sal_uInt8           Reserved;
+
+    /** Any combination of the RTL_TEXTENCODING_INFO flags.
+
+        RTL_TEXTENCODING_INFO_CONTEXT:  The encoding uses some mechanism (like
+        state-changing byte sequences) to switch between different modes (e.g.,
+        to encode multiple character repertoires within the same byte ranges).
+
+        Even if an encoding does not have the CONTEXT property, interpretation
+        of certain byte values within that encoding can depend on context (e.g.,
+        a certain byte value could be either a single-byte character or a
+        subsequent byte of a multi-byte character).  Likewise, the single shift
+        characters (SS2 and SS3) used by some of the EUC encodings (to denote
+        that the following bytes constitute a character from another character
+        repertoire) do not imply that encodings making use of these characters
+        have the CONTEXT property.  Examples of encodings that do have the
+        CONTEXT property are the ISO-2022 encodings and UTF-7.
+
+        RTL_TEXTENCODING_INFO_ASCII:  The encoding is a superset of ASCII.  More
+        specifically, any appearance of a byte in the range 0x20--7F denotes the
+        corresponding ASCII character (from SPACE to DELETE); in particular,
+        such a byte cannot be part of a multi-byte character.  Note that the
+        ASCII control codes 0x00--1F are not included here, as they are used for
+        special purposes in some encodings.
+
+        If an encoding has this property, it is easy to search for occurrences of
+        ASCII characters within strings of this encoding---you do not need to
+        keep track whether a byte in the range 0x20--7F really represents an
+        ASCII character or rather is part of some multi-byte character.
+
+        The guarantees when mapping between Unicode and a given encoding with
+        the ASCII property are as follows:  When mapping from Unicode to the
+        given encoding, U+0020--007F map to 0x20--7F (but there can also be
+        other Unicode characters mapping into the range 0x20--7F), and when
+        mapping from the given encoding to Unicode, 0x20--7F map to U+0020--007F
+        (again, there can also be other characters mapping into the range
+        U+0020--007F).  In particular, this ensures round-trip conversion for
+        the ASCII range.
+
+        In principle, the ASCII property is orthogonal to the CONTEXT property.
+        In practice, however, an encoding that has the ASCII property will most
+        likely not also have the CONTEXT property.
+
+        RTL_TEXTENCODING_INFO_UNICODE:  The encoding is based on the Unicode
+        character repertoire.
+
+        RTL_TEXTENCODING_INFO_MULTIBYTE:  A multi-byte encoding.
+
+        RTL_TEXTENCODING_INFO_R2L:  An encoding used mainly or exclusively for
+        languages written from right to left.
+
+        RTL_TEXTENCODING_INFO_7BIT:  A 7-bit instead of an 8-bit encoding.
+
+        RTL_TEXTENCODING_INFO_SYMBOL:  A (generic) encoding for symbol character
+        sets.
+
+        RTL_TEXTENCODING_INFO_MIME:  The encoding is registered as a MIME
+        charset.
+     */
+    sal_uInt32          Flags;
+} rtl_TextEncodingInfo;
+
+/** Determine whether a text encoding uses single octets as basic units of
+    information (and can thus be used with the conversion routines in
+    rtl/textcvt.h).
+
+    @param nEncoding
+    Any rtl_TextEncoding value.
+
+    @return
+    True if the given encoding uses single octets as basic units of
+    information, false otherwise.
+ */
+SAL_DLLPUBLIC sal_Bool SAL_CALL rtl_isOctetTextEncoding(rtl_TextEncoding nEncoding);
+
+/** Return information about a text encoding.
+
+    @param eTextEncoding
+    Any rtl_TextEncoding value.
+
+    @param pEncInfo
+    Returns information about the given encoding.  Must not be null, and the
+    StructSize member must be set correctly.
+
+    @return
+    True if information about the given encoding is available, false
+    otherwise.
+ */
+SAL_DLLPUBLIC sal_Bool SAL_CALL rtl_getTextEncodingInfo(
+        rtl_TextEncoding eTextEncoding, rtl_TextEncodingInfo* pEncInfo );
+
+/** Map from a numeric Windows charset to a text encoding.
+
+    @param nWinCharset
+    Any numeric Windows charset.
+
+    @return
+    The corresponding rtl_TextEncoding value, or RTL_TEXTENCODING_DONTKNOW if
+    no mapping is applicable.
+    If nWinCharset is 255 (OEM_CHARSET), then return value is RTL_TEXTENCODING_IBM_850,
+    regardless of current locale.
+ */
+SAL_DLLPUBLIC rtl_TextEncoding SAL_CALL rtl_getTextEncodingFromWindowsCharset(
+        sal_uInt8 nWinCharset );
+
+/** Map from a MIME charset to a text encoding.
+
+    @param pMimeCharset
+    Any MIME charset string.  Must not be null.
+
+    @return
+    The corresponding rtl_TextEncoding value, or RTL_TEXTENCODING_DONTKNOW if
+    no mapping is applicable.
+ */
+SAL_DLLPUBLIC rtl_TextEncoding SAL_CALL rtl_getTextEncodingFromMimeCharset(
+        const sal_Char* pMimeCharset );
+
+/** Map from a Unix charset to a text encoding.
+
+    @param pUnixCharset
+    Any Unix charset string.  Must not be null.
+
+    @return
+    The corresponding rtl_TextEncoding value, or RTL_TEXTENCODING_DONTKNOW if
+    no mapping is applicable.
+ */
+SAL_DLLPUBLIC rtl_TextEncoding SAL_CALL rtl_getTextEncodingFromUnixCharset(
+        const sal_Char* pUnixCharset );
+
+/** Map from a text encoding to the best matching numeric Windows charset.
+
+    @param eTextEncoding
+    Any rtl_TextEncoding value.
+
+    @return
+    The best matching numeric Windows charset, or 1 if none matches.
+ */
+SAL_DLLPUBLIC sal_uInt8 SAL_CALL rtl_getBestWindowsCharsetFromTextEncoding(
+        rtl_TextEncoding eTextEncoding );
+
+/** Map from a text encoding to a corresponding MIME charset name, if
+    available (see <http://www.iana.org/assignments/character-sets>).
+
+    @param nEncoding
+    Any rtl_TextEncoding value.
+
+    @return
+    The (preferred) MIME charset name corresponding to the given encoding, or
+    NULL if none is available.
+ */
+SAL_DLLPUBLIC char const * SAL_CALL rtl_getMimeCharsetFromTextEncoding(
+        rtl_TextEncoding nEncoding );
+
+/** Map from a text encoding to the best matching MIME charset.
+
+    @param eTextEncoding
+    Any rtl_TextEncoding value.
+
+    @return
+    The best matching MIME charset string, or null if none matches.
+ */
+SAL_DLLPUBLIC const sal_Char* SAL_CALL rtl_getBestMimeCharsetFromTextEncoding(
+        rtl_TextEncoding eTextEncoding );
+
+/** Map from a text encoding to the best matching Unix charset.
+
+    @param eTextEncoding
+    Any rtl_TextEncoding value.
+
+    @return
+    The best matching Unix charset string, or null if none matches.
+ */
+SAL_DLLPUBLIC const sal_Char* SAL_CALL rtl_getBestUnixCharsetFromTextEncoding(
+        rtl_TextEncoding eTextEncoding  );
+
+/** Map from a Windows code page to a text encoding.
+
+    @param nCodePage
+    Any Windows code page number.
+
+    @return
+    The corresponding rtl_TextEncoding value (which will be an octet text
+    encoding, see rtl_isOctetTextEncoding), or RTL_TEXTENCODING_DONTKNOW if no
+    mapping is applicable.
+ */
+SAL_DLLPUBLIC rtl_TextEncoding SAL_CALL
+rtl_getTextEncodingFromWindowsCodePage(sal_uInt32 nCodePage);
+
+/** Map from a text encoding to a Windows code page.
+
+    @param nEncoding
+    Any rtl_TextEncoding value.
+
+    @return
+    The corresponding Windows code page number, or 0 if no mapping is
+    applicable.
+ */
+SAL_DLLPUBLIC sal_uInt32 SAL_CALL
+rtl_getWindowsCodePageFromTextEncoding(rtl_TextEncoding nEncoding);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // INCLUDED_RTL_TENCINFO_H
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */