Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 494 insertions, 0 deletions

diff --git a/tools/source/generic/poly2.cxx b/tools/source/generic/poly2.cxx
new file mode 100644
index 000000000..d37ba809f
--- /dev/null
+++ b/tools/source/generic/poly2.cxx
@@ -0,0 +1,494 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/log.hxx>
+#include <osl/diagnose.h>
+#include <poly.h>
+#include <tools/poly.hxx>
+#include <tools/debug.hxx>
+#include <tools/stream.hxx>
+#include <tools/vcompat.hxx>
+#include <tools/gen.hxx>
+#include <basegfx/polygon/b2dpolypolygon.hxx>
+#include <basegfx/polygon/b2dpolypolygoncutter.hxx>
+
+namespace tools {
+
+PolyPolygon::PolyPolygon( sal_uInt16 nInitSize )
+    : mpImplPolyPolygon( ImplPolyPolygon( nInitSize ) )
+{
+}
+
+PolyPolygon::PolyPolygon( const tools::Polygon& rPoly )
+    : mpImplPolyPolygon( rPoly )
+{
+}
+
+PolyPolygon::PolyPolygon( const tools::PolyPolygon& rPolyPoly )
+    : mpImplPolyPolygon( rPolyPoly.mpImplPolyPolygon )
+{
+}
+
+PolyPolygon::PolyPolygon( tools::PolyPolygon&& rPolyPoly ) noexcept
+    : mpImplPolyPolygon( std::move(rPolyPoly.mpImplPolyPolygon) )
+{
+}
+
+PolyPolygon::~PolyPolygon()
+{
+}
+
+void PolyPolygon::Insert( const tools::Polygon& rPoly, sal_uInt16 nPos )
+{
+    assert ( mpImplPolyPolygon->mvPolyAry.size() < MAX_POLYGONS );
+
+    if ( nPos > mpImplPolyPolygon->mvPolyAry.size() )
+        nPos = mpImplPolyPolygon->mvPolyAry.size();
+
+    mpImplPolyPolygon->mvPolyAry.insert(mpImplPolyPolygon->mvPolyAry.begin() + nPos, rPoly);
+}
+
+void PolyPolygon::Remove( sal_uInt16 nPos )
+{
+    assert(nPos < Count() && "PolyPolygon::Remove(): nPos >= nSize");
+
+    mpImplPolyPolygon->mvPolyAry.erase(mpImplPolyPolygon->mvPolyAry.begin() + nPos);
+}
+
+void PolyPolygon::Replace( const tools::Polygon& rPoly, sal_uInt16 nPos )
+{
+    assert(nPos < Count() && "PolyPolygon::Replace(): nPos >= nSize");
+
+    mpImplPolyPolygon->mvPolyAry[nPos] = rPoly;
+}
+
+const tools::Polygon& PolyPolygon::GetObject( sal_uInt16 nPos ) const
+{
+    assert(nPos < Count() && "PolyPolygon::GetObject(): nPos >= nSize");
+
+    return mpImplPolyPolygon->mvPolyAry[nPos];
+}
+
+bool PolyPolygon::IsRect() const
+{
+    bool bIsRect = false;
+    if ( Count() == 1 )
+        bIsRect = mpImplPolyPolygon->mvPolyAry[ 0 ].IsRect();
+    return bIsRect;
+}
+
+void PolyPolygon::Clear()
+{
+    mpImplPolyPolygon->mvPolyAry.clear();
+}
+
+void PolyPolygon::Optimize( PolyOptimizeFlags nOptimizeFlags )
+{
+    if(bool(nOptimizeFlags) && Count())
+    {
+        // #115630# ImplDrawHatch does not work with beziers included in the polypolygon, take care of that
+        bool bIsCurve(false);
+
+        for(sal_uInt16 a(0); !bIsCurve && a < Count(); a++)
+        {
+            if((*this)[a].HasFlags())
+            {
+                bIsCurve = true;
+            }
+        }
+
+        if(bIsCurve)
+        {
+            OSL_ENSURE(false, "Optimize does *not* support curves, falling back to AdaptiveSubdivide()...");
+            tools::PolyPolygon aPolyPoly;
+
+            AdaptiveSubdivide(aPolyPoly);
+            aPolyPoly.Optimize(nOptimizeFlags);
+            *this = aPolyPoly;
+        }
+        else
+        {
+            double      fArea;
+            const bool  bEdges = ( nOptimizeFlags & PolyOptimizeFlags::EDGES ) == PolyOptimizeFlags::EDGES;
+            sal_uInt16      nPercent = 0;
+
+            if( bEdges )
+            {
+                const tools::Rectangle aBound( GetBoundRect() );
+
+                fArea = ( aBound.GetWidth() + aBound.GetHeight() ) * 0.5;
+                nPercent = 50;
+                nOptimizeFlags &= ~PolyOptimizeFlags::EDGES;
+            }
+
+            // Optimize polygons
+            for( sal_uInt16 i = 0, nPolyCount = mpImplPolyPolygon->mvPolyAry.size(); i < nPolyCount; i++ )
+            {
+                if( bEdges )
+                {
+                    mpImplPolyPolygon->mvPolyAry[ i ].Optimize( PolyOptimizeFlags::NO_SAME );
+                    tools::Polygon::ImplReduceEdges( mpImplPolyPolygon->mvPolyAry[ i ], fArea, nPercent );
+                }
+
+                if( bool(nOptimizeFlags) )
+                    mpImplPolyPolygon->mvPolyAry[ i ].Optimize( nOptimizeFlags );
+            }
+        }
+    }
+}
+
+void PolyPolygon::AdaptiveSubdivide( tools::PolyPolygon& rResult ) const
+{
+    rResult.Clear();
+
+    tools::Polygon aPolygon;
+
+    for( size_t i = 0; i < mpImplPolyPolygon->mvPolyAry.size(); i++ )
+    {
+        mpImplPolyPolygon->mvPolyAry[ i ].AdaptiveSubdivide( aPolygon, 1.0 );
+        rResult.Insert( aPolygon );
+    }
+}
+
+tools::PolyPolygon PolyPolygon::SubdivideBezier( const tools::PolyPolygon& rPolyPoly )
+{
+    sal_uInt16 i, nPolys = rPolyPoly.Count();
+    tools::PolyPolygon aPolyPoly( nPolys );
+    for( i=0; i<nPolys; ++i )
+        aPolyPoly.Insert( tools::Polygon::SubdivideBezier( rPolyPoly.GetObject(i) ) );
+
+    return aPolyPoly;
+}
+
+
+void PolyPolygon::GetIntersection( const tools::PolyPolygon& rPolyPoly, tools::PolyPolygon& rResult ) const
+{
+    ImplDoOperation( rPolyPoly, rResult, PolyClipOp::INTERSECT );
+}
+
+void PolyPolygon::GetUnion( const tools::PolyPolygon& rPolyPoly, tools::PolyPolygon& rResult ) const
+{
+    ImplDoOperation( rPolyPoly, rResult, PolyClipOp::UNION );
+}
+
+void PolyPolygon::ImplDoOperation( const tools::PolyPolygon& rPolyPoly, tools::PolyPolygon& rResult, PolyClipOp nOperation ) const
+{
+    // Convert to B2DPolyPolygon, temporarily. It might be
+    // advantageous in the future, to have a tools::PolyPolygon adaptor that
+    // just simulates a B2DPolyPolygon here...
+    basegfx::B2DPolyPolygon aMergePolyPolygonA( getB2DPolyPolygon() );
+    basegfx::B2DPolyPolygon aMergePolyPolygonB( rPolyPoly.getB2DPolyPolygon() );
+
+    // normalize the two polypolygons before. Force properly oriented
+    // polygons.
+    aMergePolyPolygonA = basegfx::utils::prepareForPolygonOperation( aMergePolyPolygonA );
+    aMergePolyPolygonB = basegfx::utils::prepareForPolygonOperation( aMergePolyPolygonB );
+
+    switch( nOperation )
+    {
+        // All code extracted from svx/source/svdraw/svedtv2.cxx
+
+        case PolyClipOp::UNION:
+        {
+            // merge A and B (OR)
+            aMergePolyPolygonA = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonA, aMergePolyPolygonB);
+            break;
+        }
+
+        default:
+        case PolyClipOp::INTERSECT:
+        {
+            // cut poly 1 against polys 2..n (AND)
+            aMergePolyPolygonA = basegfx::utils::solvePolygonOperationAnd(aMergePolyPolygonA, aMergePolyPolygonB);
+            break;
+        }
+    }
+
+    rResult = tools::PolyPolygon( aMergePolyPolygonA );
+}
+
+sal_uInt16 PolyPolygon::Count() const
+{
+    return mpImplPolyPolygon->mvPolyAry.size();
+}
+
+void PolyPolygon::Move( long nHorzMove, long nVertMove )
+{
+    // Required for DrawEngine
+    if( nHorzMove || nVertMove )
+    {
+        // move points
+        sal_uInt16 nPolyCount = mpImplPolyPolygon->mvPolyAry.size();
+        for ( sal_uInt16 i = 0; i < nPolyCount; i++ )
+            mpImplPolyPolygon->mvPolyAry[i].Move( nHorzMove, nVertMove );
+    }
+}
+
+void PolyPolygon::Translate( const Point& rTrans )
+{
+    // move points
+    for ( sal_uInt16 i = 0, nCount = mpImplPolyPolygon->mvPolyAry.size(); i < nCount; i++ )
+        mpImplPolyPolygon->mvPolyAry[ i ].Translate( rTrans );
+}
+
+void PolyPolygon::Scale( double fScaleX, double fScaleY )
+{
+    // Move points
+    for ( sal_uInt16 i = 0, nCount = mpImplPolyPolygon->mvPolyAry.size(); i < nCount; i++ )
+        mpImplPolyPolygon->mvPolyAry[ i ].Scale( fScaleX, fScaleY );
+}
+
+void PolyPolygon::Rotate( const Point& rCenter, sal_uInt16 nAngle10 )
+{
+    nAngle10 %= 3600;
+
+    if( nAngle10 )
+    {
+        const double fAngle = F_PI1800 * nAngle10;
+        Rotate( rCenter, sin( fAngle ), cos( fAngle ) );
+    }
+}
+
+void PolyPolygon::Rotate( const Point& rCenter, double fSin, double fCos )
+{
+    // move points
+    for ( sal_uInt16 i = 0, nCount = mpImplPolyPolygon->mvPolyAry.size(); i < nCount; i++ )
+        mpImplPolyPolygon->mvPolyAry[ i ].Rotate( rCenter, fSin, fCos );
+}
+
+void PolyPolygon::Clip( const tools::Rectangle& rRect )
+{
+    sal_uInt16 nPolyCount = mpImplPolyPolygon->mvPolyAry.size();
+    sal_uInt16 i;
+
+    if ( !nPolyCount )
+        return;
+
+    // Clip every polygon, deleting the empty ones
+    for ( i = 0; i < nPolyCount; i++ )
+        mpImplPolyPolygon->mvPolyAry[i].Clip( rRect );
+    while ( nPolyCount )
+    {
+        if ( GetObject( nPolyCount-1 ).GetSize() <= 2 )
+            Remove( nPolyCount-1 );
+        nPolyCount--;
+    }
+}
+
+tools::Rectangle PolyPolygon::GetBoundRect() const
+{
+    long    nXMin=0, nXMax=0, nYMin=0, nYMax=0;
+    bool    bFirst = true;
+    sal_uInt16  nPolyCount = mpImplPolyPolygon->mvPolyAry.size();
+
+    for ( sal_uInt16 n = 0; n < nPolyCount; n++ )
+    {
+        const tools::Polygon*  pPoly = &mpImplPolyPolygon->mvPolyAry[n];
+        const Point*    pAry = pPoly->GetConstPointAry();
+        sal_uInt16          nPointCount = pPoly->GetSize();
+
+        for ( sal_uInt16 i = 0; i < nPointCount; i++ )
+        {
+            const Point* pPt = &pAry[ i ];
+
+            if ( bFirst )
+            {
+                nXMin = nXMax = pPt->X();
+                nYMin = nYMax = pPt->Y();
+                bFirst = false;
+            }
+            else
+            {
+                if ( pPt->X() < nXMin )
+                    nXMin = pPt->X();
+                if ( pPt->X() > nXMax )
+                    nXMax = pPt->X();
+                if ( pPt->Y() < nYMin )
+                    nYMin = pPt->Y();
+                if ( pPt->Y() > nYMax )
+                    nYMax = pPt->Y();
+            }
+        }
+    }
+
+    if ( !bFirst )
+        return tools::Rectangle( nXMin, nYMin, nXMax, nYMax );
+    else
+        return tools::Rectangle();
+}
+
+Polygon& PolyPolygon::operator[]( sal_uInt16 nPos )
+{
+    assert(nPos < Count() && "PolyPolygon::[](): nPos >= nSize");
+
+    return mpImplPolyPolygon->mvPolyAry[nPos];
+}
+
+PolyPolygon& PolyPolygon::operator=( const tools::PolyPolygon& rPolyPoly )
+{
+    mpImplPolyPolygon = rPolyPoly.mpImplPolyPolygon;
+    return *this;
+}
+
+PolyPolygon& PolyPolygon::operator=( tools::PolyPolygon&& rPolyPoly ) noexcept
+{
+    mpImplPolyPolygon = std::move(rPolyPoly.mpImplPolyPolygon);
+    return *this;
+}
+
+bool PolyPolygon::operator==( const tools::PolyPolygon& rPolyPoly ) const
+{
+    return rPolyPoly.mpImplPolyPolygon == mpImplPolyPolygon;
+}
+
+SvStream& ReadPolyPolygon( SvStream& rIStream, tools::PolyPolygon& rPolyPoly )
+{
+    sal_uInt16 nPolyCount(0);
+
+    // Read number of polygons
+    rIStream.ReadUInt16( nPolyCount );
+
+    const size_t nMinRecordSize = sizeof(sal_uInt16);
+    const size_t nMaxRecords = rIStream.remainingSize() / nMinRecordSize;
+    if (nPolyCount > nMaxRecords)
+    {
+        SAL_WARN("tools", "Parsing error: " << nMaxRecords <<
+                 " max possible entries, but " << nPolyCount << " claimed, truncating");
+        nPolyCount = nMaxRecords;
+    }
+
+    if( nPolyCount )
+    {
+        rPolyPoly.mpImplPolyPolygon->mvPolyAry.resize(nPolyCount);
+
+        tools::Polygon aTempPoly;
+        for ( sal_uInt16 i = 0; i < nPolyCount; i++ )
+        {
+            ReadPolygon( rIStream, aTempPoly );
+            rPolyPoly.mpImplPolyPolygon->mvPolyAry[i] = aTempPoly;
+        }
+    }
+    else
+        rPolyPoly = tools::PolyPolygon();
+
+    return rIStream;
+}
+
+SvStream& WritePolyPolygon( SvStream& rOStream, const tools::PolyPolygon& rPolyPoly )
+{
+    // Write number of polygons
+    sal_uInt16 nPolyCount = rPolyPoly.mpImplPolyPolygon->mvPolyAry.size();
+    rOStream.WriteUInt16( nPolyCount );
+
+    // output polygons
+    for ( sal_uInt16 i = 0; i < nPolyCount; i++ )
+        WritePolygon( rOStream, rPolyPoly.mpImplPolyPolygon->mvPolyAry[i] );
+
+    return rOStream;
+}
+
+void PolyPolygon::Read( SvStream& rIStream )
+{
+    VersionCompat aCompat( rIStream, StreamMode::READ );
+
+    sal_uInt16 nPolyCount(0);
+
+    // Read number of polygons
+    rIStream.ReadUInt16( nPolyCount );
+
+    const size_t nMinRecordSize = sizeof(sal_uInt16);
+    const size_t nMaxRecords = rIStream.remainingSize() / nMinRecordSize;
+    if (nPolyCount > nMaxRecords)
+    {
+        SAL_WARN("tools", "Parsing error: " << nMaxRecords <<
+                 " max possible entries, but " << nPolyCount << " claimed, truncating");
+        nPolyCount = nMaxRecords;
+    }
+
+    if( nPolyCount )
+    {
+        mpImplPolyPolygon->mvPolyAry.clear();
+
+        for ( sal_uInt16 i = 0; i < nPolyCount; i++ )
+        {
+            tools::Polygon aTempPoly;
+            aTempPoly.ImplRead( rIStream );
+            mpImplPolyPolygon->mvPolyAry.emplace_back( aTempPoly );
+        }
+    }
+    else
+        *this = tools::PolyPolygon();
+}
+
+void PolyPolygon::Write( SvStream& rOStream ) const
+{
+    VersionCompat aCompat( rOStream, StreamMode::WRITE, 1 );
+
+    // Write number of polygons
+    sal_uInt16 nPolyCount = mpImplPolyPolygon->mvPolyAry.size();
+    rOStream.WriteUInt16( nPolyCount );
+
+    // Output polygons
+    for ( sal_uInt16 i = 0; i < nPolyCount; i++ )
+        mpImplPolyPolygon->mvPolyAry[i].ImplWrite( rOStream );
+}
+
+// convert to basegfx::B2DPolyPolygon and return
+basegfx::B2DPolyPolygon PolyPolygon::getB2DPolyPolygon() const
+{
+    basegfx::B2DPolyPolygon aRetval;
+
+    for(size_t a(0); a < mpImplPolyPolygon->mvPolyAry.size(); a++)
+    {
+        tools::Polygon const & rCandidate = mpImplPolyPolygon->mvPolyAry[a];
+        aRetval.append(rCandidate.getB2DPolygon());
+    }
+
+    return aRetval;
+}
+
+// constructor to convert from basegfx::B2DPolyPolygon
+PolyPolygon::PolyPolygon(const basegfx::B2DPolyPolygon& rPolyPolygon)
+    : mpImplPolyPolygon(rPolyPolygon)
+{
+}
+
+} /* namespace tools */
+
+ImplPolyPolygon::ImplPolyPolygon(const basegfx::B2DPolyPolygon& rPolyPolygon)
+{
+    const sal_uInt16 nCount(sal_uInt16(rPolyPolygon.count()));
+    DBG_ASSERT(sal_uInt32(nCount) == rPolyPolygon.count(),
+        "PolyPolygon::PolyPolygon: Too many sub-polygons in given basegfx::B2DPolyPolygon (!)");
+
+    if ( nCount )
+    {
+        mvPolyAry.resize( nCount );
+
+        for(sal_uInt16 a(0); a < nCount; a++)
+        {
+            const basegfx::B2DPolygon& aCandidate(rPolyPolygon.getB2DPolygon(sal_uInt32(a)));
+            mvPolyAry[a] = tools::Polygon( aCandidate );
+        }
+    }
+    else
+       mvPolyAry.reserve(16);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */