Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1118 insertions, 0 deletions

diff --git a/unotools/source/config/moduleoptions.cxx b/unotools/source/config/moduleoptions.cxx
new file mode 100644
index 000000000..8082749e9
--- /dev/null
+++ b/unotools/source/config/moduleoptions.cxx
@@ -0,0 +1,1118 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <unotools/moduleoptions.hxx>
+#include <comphelper/sequenceashashmap.hxx>
+#include <unotools/configitem.hxx>
+#include <comphelper/processfactory.hxx>
+#include <comphelper/sequence.hxx>
+#include <osl/diagnose.h>
+#include <o3tl/enumarray.hxx>
+#include <rtl/instance.hxx>
+#include <com/sun/star/uno/Any.hxx>
+#include <com/sun/star/uno/Sequence.hxx>
+#include <com/sun/star/beans/PropertyValue.hpp>
+#include <com/sun/star/container/XNameAccess.hpp>
+#include <com/sun/star/frame/XModel.hpp>
+#include <com/sun/star/lang/XServiceInfo.hpp>
+#include <com/sun/star/document/XTypeDetection.hpp>
+#include <com/sun/star/util/PathSubstitution.hpp>
+#include <com/sun/star/util/XStringSubstitution.hpp>
+
+#include "itemholder1.hxx"
+
+/*-************************************************************************************************************
+    @descr          These values are used to define necessary keys from our configuration management to support
+                    all functionality of these implementation.
+                    It's a fast way to make changes if some keys change its name or location!
+
+                    Property handle are necessary to specify right position in return list of configuration
+                    for asked values. We ask it with a list of properties to get its values. The returned list
+                    has the same order like our given name list!
+                    e.g.:
+                            NAMELIST[ PROPERTYHANDLE_xxx ] => VALUELIST[ PROPERTYHANDLE_xxx ]
+*//*-*************************************************************************************************************/
+#define ROOTNODE_FACTORIES                  "Setup/Office/Factories"
+#define PATHSEPARATOR                       "/"
+
+// Attention: The property "ooSetupFactoryEmptyDocumentURL" is read from configuration but not used! There is
+//            special code that uses hard coded strings to return them.
+#define PROPERTYNAME_SHORTNAME              "ooSetupFactoryShortName"
+#define PROPERTYNAME_TEMPLATEFILE           "ooSetupFactoryTemplateFile"
+#define PROPERTYNAME_WINDOWATTRIBUTES       "ooSetupFactoryWindowAttributes"
+#define PROPERTYNAME_EMPTYDOCUMENTURL       "ooSetupFactoryEmptyDocumentURL"
+#define PROPERTYNAME_DEFAULTFILTER          "ooSetupFactoryDefaultFilter"
+#define PROPERTYNAME_ICON                   "ooSetupFactoryIcon"
+
+#define PROPERTYHANDLE_SHORTNAME            0
+#define PROPERTYHANDLE_TEMPLATEFILE         1
+#define PROPERTYHANDLE_WINDOWATTRIBUTES     2
+#define PROPERTYHANDLE_EMPTYDOCUMENTURL     3
+#define PROPERTYHANDLE_DEFAULTFILTER        4
+#define PROPERTYHANDLE_ICON                 5
+
+#define PROPERTYCOUNT                       6
+
+#define FACTORYNAME_WRITER                  "com.sun.star.text.TextDocument"
+#define FACTORYNAME_WRITERWEB               "com.sun.star.text.WebDocument"
+#define FACTORYNAME_WRITERGLOBAL            "com.sun.star.text.GlobalDocument"
+#define FACTORYNAME_CALC                    "com.sun.star.sheet.SpreadsheetDocument"
+#define FACTORYNAME_DRAW                    "com.sun.star.drawing.DrawingDocument"
+#define FACTORYNAME_IMPRESS                 "com.sun.star.presentation.PresentationDocument"
+#define FACTORYNAME_MATH                    "com.sun.star.formula.FormulaProperties"
+#define FACTORYNAME_CHART                   "com.sun.star.chart2.ChartDocument"
+#define FACTORYNAME_DATABASE                "com.sun.star.sdb.OfficeDatabaseDocument"
+#define FACTORYNAME_STARTMODULE             "com.sun.star.frame.StartModule"
+#define FACTORYNAME_BASIC                   "com.sun.star.script.BasicIDE"
+
+#define FACTORYCOUNT                        11
+
+namespace {
+
+/*-************************************************************************************************************
+    @descr  This struct hold information about one factory. We declare a complete array which can hold infos
+            for all well known factories. Values of enum "EFactory" (see header!) are directly used as index!
+            So we can support a fast access on this information.
+*//*-*************************************************************************************************************/
+struct FactoryInfo
+{
+    public:
+
+        // initialize empty struct
+        FactoryInfo()
+        {
+            free();
+        }
+
+        // easy way to reset struct member!
+        void free()
+        {
+            bInstalled                  = false;
+            sFactory.clear();
+            sTemplateFile.clear();
+            sDefaultFilter.clear();
+            nIcon                       = 0;
+            bChangedTemplateFile        = false;
+            bChangedDefaultFilter       = false;
+            bDefaultFilterReadonly      = false;
+        }
+
+        // returns list of properties, which has changed only!
+        // We use given value of sNodeBase to build full qualified paths ...
+        // Last sign of it must be "/". because we use it directly, without any additional things!
+        css::uno::Sequence< css::beans::PropertyValue > getChangedProperties( const OUString& sNodeBase )
+        {
+            // a) reserve memory for max. count of changed properties
+            // b) add names and values of changed ones only and count it
+            // c) resize return list by using count
+            css::uno::Sequence< css::beans::PropertyValue > lProperties   ( 4 );
+            sal_Int8                                        nRealyChanged = 0;
+
+            if( bChangedTemplateFile )
+            {
+                lProperties[nRealyChanged].Name = sNodeBase + PROPERTYNAME_TEMPLATEFILE;
+
+                if ( !sTemplateFile.isEmpty() )
+                {
+                    lProperties[nRealyChanged].Value
+                        <<= getStringSubstitution()
+                            ->reSubstituteVariables( sTemplateFile );
+                }
+                else
+                {
+                    lProperties[nRealyChanged].Value <<= sTemplateFile;
+                }
+
+                ++nRealyChanged;
+            }
+            if( bChangedDefaultFilter )
+            {
+                lProperties[nRealyChanged].Name    = sNodeBase + PROPERTYNAME_DEFAULTFILTER;
+                lProperties[nRealyChanged].Value <<= sDefaultFilter;
+                ++nRealyChanged;
+            }
+
+            // Don't forget to reset changed flags! Otherwise we save it again and again and ...
+            bChangedTemplateFile        = false;
+            bChangedDefaultFilter       = false;
+
+            lProperties.realloc( nRealyChanged );
+            return lProperties;
+        }
+
+        // We must support setting AND marking of changed values.
+        // That's why we can't make our member public. We must use get/set/init methods
+        // to control access on it!
+        bool            getInstalled        () const { return bInstalled;         };
+        const OUString& getFactory          () const { return sFactory;           };
+        const OUString& getTemplateFile     () const { return sTemplateFile;      };
+        const OUString& getDefaultFilter    () const { return sDefaultFilter;     };
+        bool            isDefaultFilterReadonly() const { return bDefaultFilterReadonly; }
+        sal_Int32       getIcon             () const { return nIcon;              };
+
+        // If you call set-methods - we check for changes of values and mark it.
+        // But if you wish to set it without that... you must initialize it!
+        void initInstalled        ()                                       { bInstalled        = true; }
+        void initFactory          ( const OUString& sNewFactory          ) { sFactory          = sNewFactory; }
+        void initDefaultFilter    ( const OUString& sNewDefaultFilter    ) { sDefaultFilter    = sNewDefaultFilter; }
+        void setDefaultFilterReadonly( const bool bVal){bDefaultFilterReadonly = bVal;}
+        void initIcon             ( sal_Int32              nNewIcon             ) { nIcon             = nNewIcon; }
+
+        void initTemplateFile( const OUString& sNewTemplateFile )
+        {
+            if ( !sNewTemplateFile.isEmpty() )
+            {
+                sTemplateFile= getStringSubstitution()->substituteVariables( sNewTemplateFile, false );
+            }
+            else
+            {
+                sTemplateFile = sNewTemplateFile;
+            }
+        }
+
+        void setTemplateFile( const OUString& sNewTemplateFile )
+        {
+            if( sTemplateFile != sNewTemplateFile )
+            {
+                sTemplateFile        = sNewTemplateFile;
+                bChangedTemplateFile = true;
+            }
+        };
+
+        void setDefaultFilter( const OUString& sNewDefaultFilter )
+        {
+            if( sDefaultFilter != sNewDefaultFilter )
+            {
+                sDefaultFilter       = sNewDefaultFilter;
+                bChangedDefaultFilter = true;
+            }
+        };
+
+    private:
+        css::uno::Reference< css::util::XStringSubstitution > const & getStringSubstitution()
+        {
+            if ( !xSubstVars.is() )
+            {
+                xSubstVars.set( css::util::PathSubstitution::create(::comphelper::getProcessComponentContext()) );
+            }
+            return xSubstVars;
+        }
+
+        bool         bInstalled;
+        OUString     sFactory;
+        OUString     sTemplateFile;
+        OUString     sDefaultFilter;
+        sal_Int32    nIcon;
+
+        bool            bChangedTemplateFile        :1;
+        bool            bChangedDefaultFilter       :1;
+        bool            bDefaultFilterReadonly      :1;
+
+        css::uno::Reference< css::util::XStringSubstitution >  xSubstVars;
+};
+
+}
+
+class SvtModuleOptions_Impl : public ::utl::ConfigItem
+{
+
+    //  public methods
+
+    public:
+
+        //  constructor / destructor
+
+         SvtModuleOptions_Impl();
+        virtual ~SvtModuleOptions_Impl() override;
+
+        //  override methods of baseclass
+
+        virtual void Notify( const css::uno::Sequence< OUString >& lPropertyNames ) override;
+
+        //  public interface
+
+        bool            IsModuleInstalled         (       SvtModuleOptions::EModule     eModule    ) const;
+        css::uno::Sequence < OUString > GetAllServiceNames();
+        OUString const & GetFactoryName           (       SvtModuleOptions::EFactory    eFactory   ) const;
+        OUString const & GetFactoryStandardTemplate(      SvtModuleOptions::EFactory    eFactory   ) const;
+        static OUString GetFactoryEmptyDocumentURL(       SvtModuleOptions::EFactory    eFactory   );
+        OUString const & GetFactoryDefaultFilter  (       SvtModuleOptions::EFactory    eFactory   ) const;
+        bool            IsDefaultFilterReadonly(          SvtModuleOptions::EFactory eFactory      ) const;
+        sal_Int32       GetFactoryIcon            (       SvtModuleOptions::EFactory    eFactory   ) const;
+        static bool     ClassifyFactoryByName     ( const OUString&              sName      ,
+                                                          SvtModuleOptions::EFactory&   eFactory   );
+        void            SetFactoryStandardTemplate(       SvtModuleOptions::EFactory    eFactory   ,
+                                                    const OUString&              sTemplate  );
+        void            SetFactoryDefaultFilter   (       SvtModuleOptions::EFactory    eFactory   ,
+                                                    const OUString&              sFilter    );
+        void            MakeReadonlyStatesAvailable();
+
+    //  private methods
+
+    private:
+        static css::uno::Sequence< OUString > impl_ExpandSetNames ( const css::uno::Sequence< OUString >& lSetNames );
+        void impl_Read ( const css::uno::Sequence< OUString >& lSetNames );
+
+        virtual void ImplCommit() override;
+
+    //  private member
+
+    private:
+        o3tl::enumarray<SvtModuleOptions::EFactory, FactoryInfo> m_lFactories;
+        bool            m_bReadOnlyStatesWellKnown;
+};
+
+/*-************************************************************************************************************
+    @short      default ctor
+    @descr      We open our configuration here and read all necessary values from it.
+                These values are cached till everyone call Commit(). Then we write changed ones back to cfg.
+
+    @seealso    baseclass ConfigItem
+    @seealso    method impl_Read()
+    @threadsafe no
+*//*-*************************************************************************************************************/
+SvtModuleOptions_Impl::SvtModuleOptions_Impl()
+    :   ::utl::ConfigItem( ROOTNODE_FACTORIES )
+    ,   m_bReadOnlyStatesWellKnown( false )
+{
+    // First initialize list of factory infos! Otherwise we couldn't guarantee right working of these class.
+    for( auto & rFactory : m_lFactories )
+        rFactory.free();
+
+    // Get name list of all existing set node names in configuration to read her properties in impl_Read().
+    // These list is a list of long names of our factories.
+    const css::uno::Sequence< OUString > lFactories = GetNodeNames( OUString() );
+    impl_Read( lFactories );
+
+    // Enable notification for changes by using configuration directly.
+    // So we can update our internal values immediately.
+    EnableNotification( lFactories );
+}
+
+SvtModuleOptions_Impl::~SvtModuleOptions_Impl()
+{
+    assert(!IsModified()); // should have been committed
+}
+
+/*-************************************************************************************************************
+    @short      called for notify of configmanager
+    @descr      This method is called from the ConfigManager before application ends or from the
+                PropertyChangeListener if the sub tree broadcasts changes. You must update our
+                internal values.
+
+    @attention  We are registered for pure set node names only. So we can use our internal method "impl_Read()" to
+                update our info list. Because - this method expand given name list to full qualified property list
+                and use it to read the values. These values are filled into our internal member list m_lFactories
+                at right position.
+
+    @seealso    method impl_Read()
+
+    @param      "lNames" is the list of set node entries which should be updated.
+    @threadsafe no
+*//*-*************************************************************************************************************/
+void SvtModuleOptions_Impl::Notify( const css::uno::Sequence< OUString >& )
+{
+    OSL_FAIL( "SvtModuleOptions_Impl::Notify() Not implemented yet!" );
+}
+
+/*-****************************************************************************************************
+    @short      write changes to configuration
+    @descr      This method writes the changed values into the sub tree
+                and should always called in our destructor to guarantee consistency of config data.
+
+    @attention  We clear complete set in configuration first and write it completely new! So we don't must
+                distinguish between existing, added or removed elements. Our internal cached values
+                are the only and right ones.
+
+    @seealso    baseclass ConfigItem
+    @threadsafe no
+*//*-*****************************************************************************************************/
+void SvtModuleOptions_Impl::ImplCommit()
+{
+    // Reserve memory for ALL possible factory properties!
+    // Step over all factories and get her really changed values only.
+    // Build list of these ones and use it for commit.
+    css::uno::Sequence< css::beans::PropertyValue > lCommitProperties( FACTORYCOUNT*PROPERTYCOUNT );
+    sal_Int32                                       nRealCount       = 0;
+    OUString                                 sBasePath;
+    for( FactoryInfo & rInfo : m_lFactories )
+    {
+        // These path is used to build full qualified property names...
+        // See pInfo->getChangedProperties() for further information
+        sBasePath  = PATHSEPARATOR + rInfo.getFactory() + PATHSEPARATOR;
+
+        const css::uno::Sequence< css::beans::PropertyValue > lChangedProperties = rInfo.getChangedProperties ( sBasePath );
+        std::copy(lChangedProperties.begin(), lChangedProperties.end(), std::next(lCommitProperties.begin(), nRealCount));
+        nRealCount += lChangedProperties.getLength();
+    }
+    // Resize commit list to real size.
+    // If nothing to do - suppress calling of configuration...
+    // It could be too expensive :-)
+    if( nRealCount > 0 )
+    {
+        lCommitProperties.realloc( nRealCount );
+        SetSetProperties( OUString(), lCommitProperties );
+    }
+}
+
+/*-****************************************************************************************************
+    @short      access method to get internal values
+    @descr      These methods implement easy access to our internal values.
+                You give us right enum value to specify which module interest you ... we return right information.
+
+    @attention  Some people use any value as enum ... but we support in header specified values only!
+                We use it directly as index in our internal list. If enum value isn't right - we crash with an
+                "index out of range"!!! Please use me right - otherwise there is no guarantee.
+    @param      "eModule"  , index in list - specify module
+    @return     Queried information.
+
+    @onerror    We return default values. (mostly "not installed"!)
+    @threadsafe no
+*//*-*****************************************************************************************************/
+bool SvtModuleOptions_Impl::IsModuleInstalled( SvtModuleOptions::EModule eModule ) const
+{
+    switch( eModule )
+    {
+        case SvtModuleOptions::EModule::WRITER:
+            return m_lFactories[SvtModuleOptions::EFactory::WRITER].getInstalled();
+        case SvtModuleOptions::EModule::WEB:
+            return m_lFactories[SvtModuleOptions::EFactory::WRITERWEB].getInstalled();
+        case SvtModuleOptions::EModule::GLOBAL:
+            return m_lFactories[SvtModuleOptions::EFactory::WRITERGLOBAL].getInstalled();
+        case SvtModuleOptions::EModule::CALC:
+            return m_lFactories[SvtModuleOptions::EFactory::CALC].getInstalled();
+        case SvtModuleOptions::EModule::DRAW:
+            return m_lFactories[SvtModuleOptions::EFactory::DRAW].getInstalled();
+        case SvtModuleOptions::EModule::IMPRESS:
+            return m_lFactories[SvtModuleOptions::EFactory::IMPRESS].getInstalled();
+        case SvtModuleOptions::EModule::MATH:
+            return m_lFactories[SvtModuleOptions::EFactory::MATH].getInstalled();
+        case SvtModuleOptions::EModule::CHART:
+            return m_lFactories[SvtModuleOptions::EFactory::CHART].getInstalled();
+        case SvtModuleOptions::EModule::STARTMODULE:
+            return m_lFactories[SvtModuleOptions::EFactory::STARTMODULE].getInstalled();
+        case SvtModuleOptions::EModule::BASIC:
+            return true; // Couldn't be deselected by setup yet!
+        case SvtModuleOptions::EModule::DATABASE:
+            return m_lFactories[SvtModuleOptions::EFactory::DATABASE].getInstalled();
+    }
+
+    return false;
+}
+
+css::uno::Sequence < OUString > SvtModuleOptions_Impl::GetAllServiceNames()
+{
+    std::vector<OUString> aVec;
+
+    for( const auto & rFactory : m_lFactories )
+        if( rFactory.getInstalled() )
+            aVec.push_back( rFactory.getFactory() );
+
+    return comphelper::containerToSequence(aVec);
+}
+
+OUString const & SvtModuleOptions_Impl::GetFactoryName( SvtModuleOptions::EFactory eFactory ) const
+{
+    return m_lFactories[eFactory].getFactory();
+}
+
+OUString SvtModuleOptions::GetFactoryShortName(SvtModuleOptions::EFactory eFactory)
+{
+    // Attention: Hard configured yet ... because it's not fine to make changes possible by xml file yet.
+    //            But it's good to plan further possibilities!
+
+    //return m_lFactories[eFactory].sShortName;
+
+    OUString sShortName;
+    switch( eFactory )
+    {
+        case SvtModuleOptions::EFactory::WRITER   :  sShortName = "swriter";
+                                                       break;
+        case SvtModuleOptions::EFactory::WRITERWEB:  sShortName = "swriter/web";
+                                                       break;
+        case SvtModuleOptions::EFactory::WRITERGLOBAL:  sShortName = "swriter/GlobalDocument";
+                                                       break;
+        case SvtModuleOptions::EFactory::CALC     :  sShortName = "scalc";
+                                                       break;
+        case SvtModuleOptions::EFactory::DRAW     :  sShortName = "sdraw";
+                                                       break;
+        case SvtModuleOptions::EFactory::IMPRESS  :  sShortName = "simpress";
+                                                       break;
+        case SvtModuleOptions::EFactory::MATH     :  sShortName = "smath";
+                                                       break;
+        case SvtModuleOptions::EFactory::CHART    :  sShortName = "schart";
+                                                       break;
+        case SvtModuleOptions::EFactory::BASIC    :  sShortName = "sbasic";
+                                                       break;
+        case SvtModuleOptions::EFactory::DATABASE :  sShortName = "sdatabase";
+                                                       break;
+        default:
+            OSL_FAIL( "unknown factory" );
+            break;
+    }
+
+    return sShortName;
+}
+
+OUString const & SvtModuleOptions_Impl::GetFactoryStandardTemplate( SvtModuleOptions::EFactory eFactory ) const
+{
+    return m_lFactories[eFactory].getTemplateFile();
+}
+
+OUString SvtModuleOptions_Impl::GetFactoryEmptyDocumentURL( SvtModuleOptions::EFactory eFactory )
+{
+    // Attention: Hard configured yet ... because it's not fine to make changes possible by xml file yet.
+    //            But it's good to plan further possibilities!
+
+    //return m_lFactories[eFactory].getEmptyDocumentURL();
+
+    OUString sURL;
+    switch( eFactory )
+    {
+        case SvtModuleOptions::EFactory::WRITER        :  sURL = "private:factory/swriter";
+                                                  break;
+        case SvtModuleOptions::EFactory::WRITERWEB     :  sURL = "private:factory/swriter/web";
+                                                  break;
+        case SvtModuleOptions::EFactory::WRITERGLOBAL  :  sURL = "private:factory/swriter/GlobalDocument";
+                                                  break;
+        case SvtModuleOptions::EFactory::CALC          :  sURL = "private:factory/scalc";
+                                                  break;
+        case SvtModuleOptions::EFactory::DRAW          :  sURL = "private:factory/sdraw";
+                                                  break;
+        case SvtModuleOptions::EFactory::IMPRESS       :  sURL = "private:factory/simpress?slot=6686";
+                                                  break;
+        case SvtModuleOptions::EFactory::MATH          :  sURL = "private:factory/smath";
+                                                  break;
+        case SvtModuleOptions::EFactory::CHART         :  sURL = "private:factory/schart";
+                                                  break;
+        case SvtModuleOptions::EFactory::BASIC         :  sURL = "private:factory/sbasic";
+                                                  break;
+        case SvtModuleOptions::EFactory::DATABASE     :  sURL = "private:factory/sdatabase?Interactive";
+                                                  break;
+        default:
+            OSL_FAIL( "unknown factory" );
+            break;
+    }
+    return sURL;
+}
+
+OUString const & SvtModuleOptions_Impl::GetFactoryDefaultFilter( SvtModuleOptions::EFactory eFactory ) const
+{
+    return m_lFactories[eFactory].getDefaultFilter();
+}
+
+bool SvtModuleOptions_Impl::IsDefaultFilterReadonly( SvtModuleOptions::EFactory eFactory   ) const
+{
+    return m_lFactories[eFactory].isDefaultFilterReadonly();
+}
+
+sal_Int32 SvtModuleOptions_Impl::GetFactoryIcon( SvtModuleOptions::EFactory eFactory ) const
+{
+    return m_lFactories[eFactory].getIcon();
+}
+
+void SvtModuleOptions_Impl::SetFactoryStandardTemplate(       SvtModuleOptions::EFactory eFactory   ,
+                                                        const OUString&           sTemplate  )
+{
+    m_lFactories[eFactory].setTemplateFile( sTemplate );
+    SetModified();
+}
+
+void SvtModuleOptions_Impl::SetFactoryDefaultFilter(       SvtModuleOptions::EFactory eFactory,
+                                                     const OUString&           sFilter )
+{
+    m_lFactories[eFactory].setDefaultFilter( sFilter );
+    SetModified();
+}
+
+/*-************************************************************************************************************
+    @short      return list of key names of our configuration management which represent our module tree
+    @descr      You give use a list of current existing set node names .. and we expand it for all
+                well known properties which are necessary for this implementation.
+                These full expanded list should be used to get values of this properties.
+
+    @seealso    ctor
+    @return     List of all relative addressed properties of given set entry names.
+
+    @onerror    List will be empty.
+    @threadsafe no
+*//*-*************************************************************************************************************/
+css::uno::Sequence< OUString > SvtModuleOptions_Impl::impl_ExpandSetNames( const css::uno::Sequence< OUString >& lSetNames )
+{
+    sal_Int32 nCount     = lSetNames.getLength();
+    css::uno::Sequence< OUString > lPropNames ( nCount*PROPERTYCOUNT );
+    OUString* pPropNames = lPropNames.getArray();
+    sal_Int32 nPropStart = 0;
+
+    for( const auto& rSetName : lSetNames )
+    {
+        pPropNames[nPropStart+PROPERTYHANDLE_SHORTNAME       ] = rSetName + PATHSEPARATOR PROPERTYNAME_SHORTNAME;
+        pPropNames[nPropStart+PROPERTYHANDLE_TEMPLATEFILE    ] = rSetName + PATHSEPARATOR PROPERTYNAME_TEMPLATEFILE;
+        pPropNames[nPropStart+PROPERTYHANDLE_WINDOWATTRIBUTES] = rSetName + PATHSEPARATOR PROPERTYNAME_WINDOWATTRIBUTES;
+        pPropNames[nPropStart+PROPERTYHANDLE_EMPTYDOCUMENTURL] = rSetName + PATHSEPARATOR PROPERTYNAME_EMPTYDOCUMENTURL;
+        pPropNames[nPropStart+PROPERTYHANDLE_DEFAULTFILTER   ] = rSetName + PATHSEPARATOR PROPERTYNAME_DEFAULTFILTER;
+        pPropNames[nPropStart+PROPERTYHANDLE_ICON            ] = rSetName + PATHSEPARATOR PROPERTYNAME_ICON;
+        nPropStart += PROPERTYCOUNT;
+    }
+
+    return lPropNames;
+}
+
+/*-************************************************************************************************************
+    @short      helper to classify given factory by name
+    @descr      Every factory has its own long and short name. So we can match right enum value for internal using.
+
+    @attention  We change in/out parameter "eFactory" in every case! But you should use it only, if return value is sal_True!
+                Algorithm:  Set out-parameter to probably value ... and check the longname.
+                            If it matches with these factory - break operation and return true AND right set parameter.
+                            Otherwise try next one and so on. If no factory was found return false. Out parameter eFactory
+                            is set to last tried value but shouldn't be used! Because our return value is false!
+    @param      "sLongName" , long name of factory, which should be classified
+    @return     "eFactory"  , right enum value, which match given long name
+                and true for successfully classification, false otherwise
+
+    @onerror    We return false.
+    @threadsafe no
+*//*-*************************************************************************************************************/
+bool SvtModuleOptions_Impl::ClassifyFactoryByName( const OUString& sName, SvtModuleOptions::EFactory& eFactory )
+{
+    bool bState;
+
+    eFactory = SvtModuleOptions::EFactory::WRITER;
+    bState   = ( sName == FACTORYNAME_WRITER );
+
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::WRITERWEB;
+        bState   = ( sName == FACTORYNAME_WRITERWEB );
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::WRITERGLOBAL;
+        bState   = ( sName == FACTORYNAME_WRITERGLOBAL );
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::CALC;
+        bState   = ( sName == FACTORYNAME_CALC );
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::DRAW;
+        bState   = ( sName == FACTORYNAME_DRAW );
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::IMPRESS;
+        bState   = ( sName == FACTORYNAME_IMPRESS );
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::MATH;
+        bState   = ( sName == FACTORYNAME_MATH );
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::CHART;
+        bState   = ( sName == FACTORYNAME_CHART );
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::DATABASE;
+        bState   = ( sName == FACTORYNAME_DATABASE );
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::STARTMODULE;
+        bState   = ( sName == FACTORYNAME_STARTMODULE);
+    }
+    // no else!
+    if( !bState )
+    {
+        eFactory = SvtModuleOptions::EFactory::BASIC;
+        bState   = ( sName == FACTORYNAME_BASIC);
+    }
+
+    return bState;
+}
+
+/*-************************************************************************************************************
+    @short      read factory configuration
+    @descr      Give us a list of pure factory names (long names!) which can be used as
+                direct set node names... and we read her property values and fill internal list.
+                These method can be used by initial reading at ctor and later updating by "Notify()".
+
+    @seealso    ctor
+    @seealso    method Notify()
+
+    @param      "lFactories" is the list of set node entries which should be read.
+    @onerror    We do nothing.
+    @threadsafe no
+*//*-*************************************************************************************************************/
+void SvtModuleOptions_Impl::impl_Read( const css::uno::Sequence< OUString >& lFactories )
+{
+    // Expand every set node name in lFactories to full qualified paths to its properties
+    // and get right values from configuration.
+    const css::uno::Sequence< OUString > lProperties = impl_ExpandSetNames( lFactories  );
+    const css::uno::Sequence< css::uno::Any >   lValues     = GetProperties( lProperties );
+
+    // Safe impossible cases.
+    // We need values from ALL configuration keys.
+    // Follow assignment use order of values in relation to our list of key names!
+    OSL_ENSURE( !(lProperties.getLength()!=lValues.getLength()), "SvtModuleOptions_Impl::impl_Read()\nI miss some values of configuration keys!" );
+
+    // Algorithm:   We step over all given factory names and classify it. These enum value can be used as direct index
+    //              in our member list m_lFactories! VAriable nPropertyStart marks start position of every factory
+    //              and her properties in expanded property/value list. The defines PROPERTHANDLE_xxx are used as offset values
+    //              added to nPropertyStart. So we can address every property relative in these lists.
+    //              If we found any valid values ... we reset all existing information for corresponding m_lFactories-entry and
+    //              use a pointer to these struct in memory directly to set new values.
+    //              But we set it only, if bInstalled is true. Otherwise all other values of a factory can be undeclared .. They
+    //              shouldn't be used then.
+    // Attention:   If a propertyset of a factory will be ignored we must step to next start position of next factory infos!
+    //              see "nPropertyStart += PROPERTYCOUNT" ...
+
+    sal_Int32                   nPropertyStart  = 0;
+    FactoryInfo*                pInfo           = nullptr;
+    SvtModuleOptions::EFactory  eFactory;
+
+    for( const OUString& sFactoryName : lFactories )
+    {
+        if( ClassifyFactoryByName( sFactoryName, eFactory ) )
+        {
+            OUString sTemp;
+            sal_Int32       nTemp = 0;
+
+            pInfo = &(m_lFactories[eFactory]);
+            pInfo->free();
+
+            pInfo->initInstalled();
+            pInfo->initFactory  ( sFactoryName );
+
+            if (lValues[nPropertyStart+PROPERTYHANDLE_TEMPLATEFILE] >>= sTemp)
+                pInfo->initTemplateFile( sTemp );
+            if (lValues[nPropertyStart+PROPERTYHANDLE_DEFAULTFILTER   ] >>= sTemp)
+                pInfo->initDefaultFilter( sTemp );
+            if (lValues[nPropertyStart+PROPERTYHANDLE_ICON] >>= nTemp)
+                pInfo->initIcon( nTemp );
+        }
+        nPropertyStart += PROPERTYCOUNT;
+    }
+}
+
+void SvtModuleOptions_Impl::MakeReadonlyStatesAvailable()
+{
+    if (m_bReadOnlyStatesWellKnown)
+        return;
+
+    css::uno::Sequence< OUString > lFactories = GetNodeNames(OUString());
+    std::transform(lFactories.begin(), lFactories.end(), lFactories.begin(),
+        [](const OUString& rFactory) -> OUString {
+            return rFactory + PATHSEPARATOR PROPERTYNAME_DEFAULTFILTER;
+        });
+
+    css::uno::Sequence< sal_Bool > lReadonlyStates = GetReadOnlyStates(lFactories);
+    sal_Int32 c = lFactories.getLength();
+    for (sal_Int32 i=0; i<c; ++i)
+    {
+        OUString&            rFactoryName = lFactories[i];
+        SvtModuleOptions::EFactory  eFactory;
+
+        if (!ClassifyFactoryByName(rFactoryName, eFactory))
+            continue;
+
+        FactoryInfo& rInfo = m_lFactories[eFactory];
+        rInfo.setDefaultFilterReadonly(lReadonlyStates[i]);
+    }
+
+    m_bReadOnlyStatesWellKnown = true;
+}
+
+namespace {
+    //global
+    std::weak_ptr<SvtModuleOptions_Impl> g_pModuleOptions;
+}
+
+/*-************************************************************************************************************
+    @short      standard constructor and destructor
+    @descr      This will initialize an instance with default values. We initialize/deinitialize our static data
+                container and create a static mutex, which is used for threadsafe code in further time of this object.
+
+    @seealso    method impl_GetOwnStaticMutex()
+    @threadsafe yes
+*//*-*************************************************************************************************************/
+SvtModuleOptions::SvtModuleOptions()
+{
+    // Global access, must be guarded (multithreading!)
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+
+    m_pImpl = g_pModuleOptions.lock();
+    if( !m_pImpl )
+    {
+        m_pImpl = std::make_shared<SvtModuleOptions_Impl>();
+        g_pModuleOptions = m_pImpl;
+        ItemHolder1::holdConfigItem(EItem::ModuleOptions);
+    }
+}
+
+SvtModuleOptions::~SvtModuleOptions()
+{
+    // Global access, must be guarded (multithreading!)
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+
+    m_pImpl.reset();
+}
+
+/*-************************************************************************************************************
+    @short      access to configuration data
+    @descr      This methods allow read/write access to configuration values.
+                They are threadsafe. All calls are forwarded to impl-data-container. See there for further information!
+
+    @seealso    method impl_GetOwnStaticMutex()
+    @threadsafe yes
+*//*-*************************************************************************************************************/
+bool SvtModuleOptions::IsModuleInstalled( EModule eModule ) const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->IsModuleInstalled( eModule );
+}
+
+OUString SvtModuleOptions::GetFactoryName( EFactory eFactory ) const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->GetFactoryName( eFactory );
+}
+
+OUString SvtModuleOptions::GetFactoryStandardTemplate( EFactory eFactory ) const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->GetFactoryStandardTemplate( eFactory );
+}
+
+OUString SvtModuleOptions::GetFactoryEmptyDocumentURL( EFactory eFactory ) const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return SvtModuleOptions_Impl::GetFactoryEmptyDocumentURL( eFactory );
+}
+
+OUString SvtModuleOptions::GetFactoryDefaultFilter( EFactory eFactory ) const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->GetFactoryDefaultFilter( eFactory );
+}
+
+bool SvtModuleOptions::IsDefaultFilterReadonly( EFactory eFactory   ) const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    m_pImpl->MakeReadonlyStatesAvailable();
+    return m_pImpl->IsDefaultFilterReadonly( eFactory );
+}
+
+sal_Int32 SvtModuleOptions::GetFactoryIcon( EFactory eFactory ) const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->GetFactoryIcon( eFactory );
+}
+
+bool SvtModuleOptions::ClassifyFactoryByName( const OUString& sName    ,
+                                                        EFactory&        eFactory )
+{
+    // We don't need any mutex here ... because we don't use any member here!
+    return SvtModuleOptions_Impl::ClassifyFactoryByName( sName, eFactory );
+}
+
+void SvtModuleOptions::SetFactoryStandardTemplate(       EFactory         eFactory   ,
+                                                   const OUString& sTemplate  )
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    m_pImpl->SetFactoryStandardTemplate( eFactory, sTemplate );
+}
+
+void SvtModuleOptions::SetFactoryDefaultFilter(       EFactory         eFactory,
+                                                const OUString& sFilter )
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    m_pImpl->SetFactoryDefaultFilter( eFactory, sFilter );
+}
+
+bool SvtModuleOptions::IsMath() const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->IsModuleInstalled( EModule::MATH );
+}
+
+bool SvtModuleOptions::IsChart() const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->IsModuleInstalled( EModule::CHART );
+}
+
+bool SvtModuleOptions::IsCalc() const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->IsModuleInstalled( EModule::CALC );
+}
+
+bool SvtModuleOptions::IsDraw() const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->IsModuleInstalled( EModule::DRAW );
+}
+
+bool SvtModuleOptions::IsWriter() const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->IsModuleInstalled( EModule::WRITER );
+}
+
+bool SvtModuleOptions::IsImpress() const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->IsModuleInstalled( EModule::IMPRESS );
+}
+
+bool SvtModuleOptions::IsDataBase() const
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->IsModuleInstalled( EModule::DATABASE );
+}
+
+namespace
+{
+    class theModuleOptionsMutex : public rtl::Static<osl::Mutex, theModuleOptionsMutex> {};
+}
+/*-****************************************************************************************************
+    @short      return a reference to a static mutex
+    @descr      These class is threadsafe.
+                We create a static mutex only for one time and use it to protect our refcount and container
+                member!
+    @return     A reference to a static mutex member.
+    @threadsafe yes
+*//*-*****************************************************************************************************/
+::osl::Mutex& SvtModuleOptions::impl_GetOwnStaticMutex()
+{
+    return theModuleOptionsMutex::get();
+}
+
+OUString SvtModuleOptions::GetModuleName( EModule eModule ) const
+{
+    switch( eModule )
+    {
+        case SvtModuleOptions::EModule::WRITER    :   { return "Writer"; }
+        case SvtModuleOptions::EModule::WEB       :   { return "Web"; }
+        case SvtModuleOptions::EModule::GLOBAL    :   { return "Global"; }
+        case SvtModuleOptions::EModule::CALC      :   { return "Calc"; }
+        case SvtModuleOptions::EModule::DRAW      :   { return "Draw"; }
+        case SvtModuleOptions::EModule::IMPRESS   :   { return "Impress"; }
+        case SvtModuleOptions::EModule::MATH      :   { return "Math"; }
+        case SvtModuleOptions::EModule::CHART     :   { return "Chart"; }
+        case SvtModuleOptions::EModule::BASIC     :   { return "Basic"; }
+        case SvtModuleOptions::EModule::DATABASE  :   { return "Database"; }
+        default:
+            OSL_FAIL( "unknown module" );
+            break;
+    }
+
+    return OUString();
+}
+
+SvtModuleOptions::EFactory SvtModuleOptions::ClassifyFactoryByShortName(const OUString& sName)
+{
+    if ( sName == "swriter" )
+        return EFactory::WRITER;
+    if (sName.equalsIgnoreAsciiCase("swriter/Web")) // sometimes they are registered for swriter/web :-(
+        return EFactory::WRITERWEB;
+    if (sName.equalsIgnoreAsciiCase("swriter/GlobalDocument")) // sometimes they are registered for swriter/globaldocument :-(
+        return EFactory::WRITERGLOBAL;
+    if ( sName == "scalc" )
+        return EFactory::CALC;
+    if ( sName == "sdraw" )
+        return EFactory::DRAW;
+    if ( sName == "simpress" )
+        return EFactory::IMPRESS;
+    if ( sName == "schart" )
+        return EFactory::CHART;
+    if ( sName == "smath" )
+        return EFactory::MATH;
+    if ( sName == "sbasic" )
+        return EFactory::BASIC;
+    if ( sName == "sdatabase" )
+        return EFactory::DATABASE;
+
+    return EFactory::UNKNOWN_FACTORY;
+}
+
+SvtModuleOptions::EFactory SvtModuleOptions::ClassifyFactoryByServiceName(const OUString& sName)
+{
+    if (sName == FACTORYNAME_WRITERGLOBAL)
+        return EFactory::WRITERGLOBAL;
+    if (sName == FACTORYNAME_WRITERWEB)
+        return EFactory::WRITERWEB;
+    if (sName == FACTORYNAME_WRITER)
+        return EFactory::WRITER;
+    if (sName == FACTORYNAME_CALC)
+        return EFactory::CALC;
+    if (sName == FACTORYNAME_DRAW)
+        return EFactory::DRAW;
+    if (sName == FACTORYNAME_IMPRESS)
+        return EFactory::IMPRESS;
+    if (sName == FACTORYNAME_MATH)
+        return EFactory::MATH;
+    if (sName == FACTORYNAME_CHART)
+        return EFactory::CHART;
+    if (sName == FACTORYNAME_DATABASE)
+        return EFactory::DATABASE;
+    if (sName == FACTORYNAME_STARTMODULE)
+        return EFactory::STARTMODULE;
+    if (sName == FACTORYNAME_BASIC)
+        return EFactory::BASIC;
+
+    return EFactory::UNKNOWN_FACTORY;
+}
+
+SvtModuleOptions::EFactory SvtModuleOptions::ClassifyFactoryByURL(const OUString&                                 sURL            ,
+                                                                  const css::uno::Sequence< css::beans::PropertyValue >& lMediaDescriptor)
+{
+    css::uno::Reference< css::uno::XComponentContext > xContext = ::comphelper::getProcessComponentContext();
+
+    css::uno::Reference< css::container::XNameAccess > xFilterCfg;
+    css::uno::Reference< css::container::XNameAccess > xTypeCfg;
+    try
+    {
+        xFilterCfg.set(
+            xContext->getServiceManager()->createInstanceWithContext("com.sun.star.document.FilterFactory", xContext), css::uno::UNO_QUERY);
+        xTypeCfg.set(
+            xContext->getServiceManager()->createInstanceWithContext("com.sun.star.document.TypeDetection", xContext), css::uno::UNO_QUERY);
+    }
+    catch(const css::uno::RuntimeException&)
+        { throw; }
+    catch(const css::uno::Exception&)
+        { return EFactory::UNKNOWN_FACTORY; }
+
+    ::comphelper::SequenceAsHashMap stlDesc(lMediaDescriptor);
+
+    // is there already a filter inside the descriptor?
+    OUString sFilterName = stlDesc.getUnpackedValueOrDefault("FilterName", OUString());
+    if (!sFilterName.isEmpty())
+    {
+        try
+        {
+            ::comphelper::SequenceAsHashMap stlFilterProps   (xFilterCfg->getByName(sFilterName));
+            OUString                 sDocumentService = stlFilterProps.getUnpackedValueOrDefault("DocumentService", OUString());
+            SvtModuleOptions::EFactory      eApp             = SvtModuleOptions::ClassifyFactoryByServiceName(sDocumentService);
+
+            if (eApp != EFactory::UNKNOWN_FACTORY)
+                return eApp;
+        }
+        catch(const css::uno::RuntimeException&)
+            { throw; }
+        catch(const css::uno::Exception&)
+            { /* do nothing here ... may the following code can help!*/ }
+    }
+
+    // is there already a type inside the descriptor?
+    OUString sTypeName = stlDesc.getUnpackedValueOrDefault("TypeName", OUString());
+    if (sTypeName.isEmpty())
+    {
+        // no :-(
+        // start flat detection of URL
+        css::uno::Reference< css::document::XTypeDetection > xDetect(xTypeCfg, css::uno::UNO_QUERY);
+        sTypeName = xDetect->queryTypeByURL(sURL);
+    }
+
+    if (sTypeName.isEmpty())
+        return EFactory::UNKNOWN_FACTORY;
+
+    // yes - there is a type info
+    // Try to find the preferred filter.
+    try
+    {
+        ::comphelper::SequenceAsHashMap stlTypeProps     (xTypeCfg->getByName(sTypeName));
+        OUString                 sPreferredFilter = stlTypeProps.getUnpackedValueOrDefault("PreferredFilter", OUString());
+        ::comphelper::SequenceAsHashMap stlFilterProps   (xFilterCfg->getByName(sPreferredFilter));
+        OUString                 sDocumentService = stlFilterProps.getUnpackedValueOrDefault("DocumentService", OUString());
+        SvtModuleOptions::EFactory      eApp             = SvtModuleOptions::ClassifyFactoryByServiceName(sDocumentService);
+
+        if (eApp != EFactory::UNKNOWN_FACTORY)
+            return eApp;
+    }
+    catch(const css::uno::RuntimeException&)
+        { throw; }
+    catch(const css::uno::Exception&)
+        { /* do nothing here ... may the following code can help!*/ }
+
+    // no filter/no type/no detection result => no fun :-)
+    return EFactory::UNKNOWN_FACTORY;
+}
+
+SvtModuleOptions::EFactory SvtModuleOptions::ClassifyFactoryByModel(const css::uno::Reference< css::frame::XModel >& xModel)
+{
+    css::uno::Reference< css::lang::XServiceInfo > xInfo(xModel, css::uno::UNO_QUERY);
+    if (!xInfo.is())
+        return EFactory::UNKNOWN_FACTORY;
+
+    const css::uno::Sequence< OUString > lServices = xInfo->getSupportedServiceNames();
+
+    for (const OUString& rService : lServices)
+    {
+        SvtModuleOptions::EFactory eApp = SvtModuleOptions::ClassifyFactoryByServiceName(rService);
+        if (eApp != EFactory::UNKNOWN_FACTORY)
+            return eApp;
+    }
+
+    return EFactory::UNKNOWN_FACTORY;
+}
+
+css::uno::Sequence < OUString > SvtModuleOptions::GetAllServiceNames()
+{
+    ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() );
+    return m_pImpl->GetAllServiceNames();
+}
+
+OUString SvtModuleOptions::GetDefaultModuleName() const
+{
+    OUString aModule;
+    if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::WRITER))
+        aModule = GetFactoryShortName(SvtModuleOptions::EFactory::WRITER);
+    else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::CALC))
+        aModule = GetFactoryShortName(SvtModuleOptions::EFactory::CALC);
+    else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::IMPRESS))
+        aModule = GetFactoryShortName(SvtModuleOptions::EFactory::IMPRESS);
+    else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::DATABASE))
+        aModule = GetFactoryShortName(SvtModuleOptions::EFactory::DATABASE);
+    else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::DRAW))
+        aModule = GetFactoryShortName(SvtModuleOptions::EFactory::DRAW);
+    else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::WEB))
+        aModule = GetFactoryShortName(SvtModuleOptions::EFactory::WRITERWEB);
+    else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::GLOBAL))
+        aModule = GetFactoryShortName(SvtModuleOptions::EFactory::WRITERGLOBAL);
+    else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::MATH))
+        aModule = GetFactoryShortName(SvtModuleOptions::EFactory::MATH);
+    return aModule;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */