diff options
Diffstat (limited to '')
-rw-r--r-- | cui/source/tabpages/page.cxx | 1554 |
1 files changed, 1554 insertions, 0 deletions
diff --git a/cui/source/tabpages/page.cxx b/cui/source/tabpages/page.cxx new file mode 100644 index 000000000..1b5fc2851 --- /dev/null +++ b/cui/source/tabpages/page.cxx @@ -0,0 +1,1554 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <memory> +#include <sfx2/objsh.hxx> +#include <sfx2/printer.hxx> +#include <sfx2/viewsh.hxx> +#include <svl/languageoptions.hxx> +#include <svtools/unitconv.hxx> +#include <vcl/svapp.hxx> +#include <vcl/weld.hxx> +#include <sfx2/htmlmode.hxx> +#include <sal/macros.h> + +#include <svx/strings.hrc> +#include <svx/dialmgr.hxx> +#include <page.hxx> +#include <svx/pageitem.hxx> +#include <editeng/brushitem.hxx> +#include <editeng/boxitem.hxx> +#include <editeng/shaditem.hxx> +#include <editeng/pbinitem.hxx> +#include <editeng/lrspitem.hxx> +#include <editeng/ulspitem.hxx> +#include <editeng/sizeitem.hxx> +#include <editeng/frmdiritem.hxx> +#include <svx/dlgutil.hxx> +#include <editeng/paperinf.hxx> +#include <svl/stritem.hxx> +#include <editeng/eerdll.hxx> +#include <editeng/editrids.hrc> +#include <svx/svxids.hrc> +#include <svtools/optionsdrawinglayer.hxx> +#include <svl/slstitm.hxx> +#include <svx/xdef.hxx> +#include <svx/unobrushitemhelper.hxx> +#include <svx/SvxNumOptionsTabPageHelper.hxx> + +// static ---------------------------------------------------------------- + +// #i19922# - tdf#126051 see svx/source/dialog/hdft.cxx and sw/source/uibase/sidebar/PageMarginControl.hxx +static const long MINBODY = 56; // 1mm in twips rounded + +const sal_uInt16 SvxPageDescPage::pRanges[] = +{ + SID_ATTR_BORDER_OUTER, + SID_ATTR_BORDER_SHADOW, + SID_ATTR_LRSPACE, + SID_ATTR_PAGE_SHARED, + SID_SWREGISTER_COLLECTION, + SID_SWREGISTER_MODE, + 0 +}; +// ------- Mapping page layout ------------------------------------------ + +const SvxPageUsage aArr[] = +{ + SvxPageUsage::All, + SvxPageUsage::Mirror, + SvxPageUsage::Right, + SvxPageUsage::Left +}; + + +static sal_uInt16 PageUsageToPos_Impl( SvxPageUsage nUsage ) +{ + for ( size_t i = 0; i < SAL_N_ELEMENTS(aArr); ++i ) + if ( aArr[i] == nUsage ) + return i; + return 3; +} + + +static SvxPageUsage PosToPageUsage_Impl( sal_uInt16 nPos ) +{ + if ( nPos >= SAL_N_ELEMENTS(aArr) ) + return SvxPageUsage::NONE; + return aArr[nPos]; +} + + +static Size GetMinBorderSpace_Impl( const SvxShadowItem& rShadow, const SvxBoxItem& rBox ) +{ + Size aSz; + aSz.setHeight( rShadow.CalcShadowSpace( SvxShadowItemSide::BOTTOM ) + rBox.CalcLineSpace( SvxBoxItemLine::BOTTOM ) ); + aSz.AdjustHeight(rShadow.CalcShadowSpace( SvxShadowItemSide::TOP ) + rBox.CalcLineSpace( SvxBoxItemLine::TOP ) ); + aSz.setWidth( rShadow.CalcShadowSpace( SvxShadowItemSide::LEFT ) + rBox.CalcLineSpace( SvxBoxItemLine::LEFT ) ); + aSz.AdjustWidth(rShadow.CalcShadowSpace( SvxShadowItemSide::RIGHT ) + rBox.CalcLineSpace( SvxBoxItemLine::RIGHT ) ); + return aSz; +} + + +static long ConvertLong_Impl( const long nIn, MapUnit eUnit ) +{ + return OutputDevice::LogicToLogic( nIn, eUnit, MapUnit::MapTwip ); +} + +static bool IsEqualSize_Impl( const SvxSizeItem* pSize, const Size& rSize ) +{ + if ( pSize ) + { + Size aSize = pSize->GetSize(); + long nDiffW = std::abs( rSize.Width () - aSize.Width () ); + long nDiffH = std::abs( rSize.Height() - aSize.Height() ); + return ( nDiffW < 10 && nDiffH < 10 ); + } + else + return false; +} + + +#define MARGIN_LEFT ( MarginPosition(0x0001) ) +#define MARGIN_RIGHT ( MarginPosition(0x0002) ) +#define MARGIN_TOP ( MarginPosition(0x0004) ) +#define MARGIN_BOTTOM ( MarginPosition(0x0008) ) + +// class SvxPageDescPage -------------------------------------------------- + +std::unique_ptr<SfxTabPage> SvxPageDescPage::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet ) +{ + return std::make_unique<SvxPageDescPage>(pPage, pController, *rSet); +} + +SvxPageDescPage::SvxPageDescPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rAttr) + : SfxTabPage(pPage, pController, "cui/ui/pageformatpage.ui", "PageFormatPage", &rAttr) + , bLandscape(false) + , eMode(SVX_PAGE_MODE_STANDARD) + , ePaperStart(PAPER_A3) + , m_nPos(0) + , mpDefPrinter(nullptr) + , mbDelPrinter(false) + , mbEnableDrawingLayerFillStyles(false) + , m_xPaperSizeBox(new SvxPaperSizeListBox(m_xBuilder->weld_combo_box("comboPageFormat"))) + , m_xPaperWidthEdit(m_xBuilder->weld_metric_spin_button("spinWidth", FieldUnit::CM)) + , m_xPaperHeightEdit(m_xBuilder->weld_metric_spin_button("spinHeight", FieldUnit::CM)) + , m_xOrientationFT(m_xBuilder->weld_label("labelOrientation")) + , m_xPortraitBtn(m_xBuilder->weld_radio_button("radiobuttonPortrait")) + , m_xLandscapeBtn(m_xBuilder->weld_radio_button("radiobuttonLandscape")) + , m_xTextFlowLbl(m_xBuilder->weld_label("labelTextFlow")) + , m_xTextFlowBox(new svx::FrameDirectionListBox(m_xBuilder->weld_combo_box("comboTextFlowBox"))) + , m_xPaperTrayBox(m_xBuilder->weld_combo_box("comboPaperTray")) + , m_xLeftMarginLbl(m_xBuilder->weld_label("labelLeftMargin")) + , m_xLeftMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargLeft", FieldUnit::CM)) + , m_xRightMarginLbl(m_xBuilder->weld_label("labelRightMargin")) + , m_xRightMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargRight", FieldUnit::CM)) + , m_xTopMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargTop", FieldUnit::CM)) + , m_xBottomMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargBot", FieldUnit::CM)) + , m_xPageText(m_xBuilder->weld_label("labelPageLayout")) + , m_xLayoutBox(m_xBuilder->weld_combo_box("comboPageLayout")) + , m_xNumberFormatText(m_xBuilder->weld_label("labelPageNumbers")) + , m_xNumberFormatBox(new SvxPageNumberListBox(m_xBuilder->weld_combo_box("comboLayoutFormat"))) + , m_xTblAlignFT(m_xBuilder->weld_label("labelTblAlign")) + , m_xHorzBox(m_xBuilder->weld_check_button("checkbuttonHorz")) + , m_xVertBox(m_xBuilder->weld_check_button("checkbuttonVert")) + , m_xAdaptBox(m_xBuilder->weld_check_button("checkAdaptBox")) + , m_xRegisterCB(m_xBuilder->weld_check_button("checkRegisterTrue")) + , m_xRegisterFT(m_xBuilder->weld_label("labelRegisterStyle")) + , m_xRegisterLB(m_xBuilder->weld_combo_box("comboRegisterStyle")) + // Strings stored in UI + , m_xInsideLbl(m_xBuilder->weld_label("labelInner")) + , m_xOutsideLbl(m_xBuilder->weld_label("labelOuter")) + , m_xPrintRangeQueryText(m_xBuilder->weld_label("labelMsg")) + , m_xBspWin(new weld::CustomWeld(*m_xBuilder, "drawingareaPageDirection", m_aBspWin)) +{ + m_xRegisterLB->set_size_request(m_xRegisterLB->get_approximate_digit_width() * 20, -1); + + bBorderModified = false; + m_aBspWin.EnableRTL(false); + + // this page needs ExchangeSupport + SetExchangeSupport(); + + SvtLanguageOptions aLangOptions; + bool bCJK = aLangOptions.IsAsianTypographyEnabled(); + bool bCTL = aLangOptions.IsCTLFontEnabled(); + bool bWeb = false; + const SfxPoolItem* pItem; + + SfxObjectShell* pShell; + if(SfxItemState::SET == rAttr.GetItemState(SID_HTML_MODE, false, &pItem) || + ( nullptr != (pShell = SfxObjectShell::Current()) && + nullptr != (pItem = pShell->GetItem(SID_HTML_MODE)))) + bWeb = 0 != (static_cast<const SfxUInt16Item*>(pItem)->GetValue() & HTMLMODE_ON); + + // fill text flow listbox with valid entries + + m_xTextFlowBox->append(SvxFrameDirection::Horizontal_LR_TB, SvxResId(RID_SVXSTR_PAGEDIR_LTR_HORI)); + + if (bCTL) + m_xTextFlowBox->append(SvxFrameDirection::Horizontal_RL_TB, SvxResId(RID_SVXSTR_PAGEDIR_RTL_HORI)); + + + // #109989# do not show vertical directions in Writer/Web + if( !bWeb && bCJK ) + { + m_xTextFlowBox->append(SvxFrameDirection::Vertical_RL_TB, SvxResId(RID_SVXSTR_PAGEDIR_RTL_VERT)); + m_xTextFlowBox->append(SvxFrameDirection::Vertical_LR_TB, SvxResId(RID_SVXSTR_PAGEDIR_LTR_VERT)); + } + + // #109989# show the text direction box in Writer/Web too + if( (bCJK || bCTL) && + SfxItemState::UNKNOWN < rAttr.GetItemState(GetWhich( SID_ATTR_FRAMEDIRECTION ))) + { + m_xTextFlowLbl->show(); + m_xTextFlowBox->show(); + m_xTextFlowBox->connect_changed(LINK(this, SvxPageDescPage, FrameDirectionModify_Impl)); + + m_aBspWin.EnableFrameDirection(true); + } + Init_Impl(); + + FieldUnit eFUnit = GetModuleFieldUnit( rAttr ); + SetFieldUnit( *m_xLeftMarginEdit, eFUnit ); + SetFieldUnit( *m_xRightMarginEdit, eFUnit ); + SetFieldUnit( *m_xTopMarginEdit, eFUnit ); + SetFieldUnit( *m_xBottomMarginEdit, eFUnit ); + SetFieldUnit( *m_xPaperWidthEdit, eFUnit ); + SetFieldUnit( *m_xPaperHeightEdit, eFUnit ); + + if ( SfxViewShell::Current() && SfxViewShell::Current()->GetPrinter() ) + { + mpDefPrinter = SfxViewShell::Current()->GetPrinter(); + } + else + { + mpDefPrinter = VclPtr<Printer>::Create(); + mbDelPrinter = true; + } + + MapMode aOldMode = mpDefPrinter->GetMapMode(); + mpDefPrinter->SetMapMode(MapMode(MapUnit::MapTwip)); + + // set first- and last-values for the margins + Size aPaperSize = mpDefPrinter->GetPaperSize(); + Size aPrintSize = mpDefPrinter->GetOutputSize(); + + /* + * To convert a point ( 0,0 ) into logic coordinates + * looks like nonsense; but it makes sense when the + * coordinate system's origin has been moved. + */ + Point aPrintOffset = mpDefPrinter->GetPageOffset() - mpDefPrinter->PixelToLogic( Point() ); + mpDefPrinter->SetMapMode( aOldMode ); + + nFirstLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(aPrintOffset.X()), FieldUnit::TWIP); + nFirstRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X()), FieldUnit::TWIP); + nFirstTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(aPrintOffset.Y() ), FieldUnit::TWIP); + nFirstBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y()), FieldUnit::TWIP ); + nLastLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(aPrintOffset.X() + aPrintSize.Width()), FieldUnit::TWIP); + nLastRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(aPrintOffset.X() + aPrintSize.Width()), FieldUnit::TWIP); + nLastTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(aPrintOffset.Y() + aPrintSize.Height()), FieldUnit::TWIP); + nLastBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(aPrintOffset.Y() + aPrintSize.Height()), FieldUnit::TWIP); + + // #i4219# get DrawingLayer options + const SvtOptionsDrawinglayer aDrawinglayerOpt; + + // #i4219# take Maximum now from configuration (1/100th cm) + // was: 11900 -> 119 cm ;new value 3 meters -> 300 cm -> 30000 + m_xPaperWidthEdit->set_max(m_xPaperWidthEdit->normalize(aDrawinglayerOpt.GetMaximumPaperWidth()), FieldUnit::CM); + m_xPaperHeightEdit->set_max(m_xPaperHeightEdit->normalize(aDrawinglayerOpt.GetMaximumPaperHeight()), FieldUnit::CM); + + // #i4219# also for margins (1/100th cm). Was: 9999, keeping. + m_xLeftMarginEdit->set_max(m_xLeftMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperLeftMargin()), FieldUnit::MM); + m_xRightMarginEdit->set_max(m_xRightMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperRightMargin()), FieldUnit::MM); + m_xTopMarginEdit->set_max(m_xTopMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperTopMargin()), FieldUnit::MM); + m_xBottomMarginEdit->set_max(m_xBottomMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperBottomMargin()), FieldUnit::MM); + + // Get the i18n framework numberings and add them to the listbox. + SvxNumOptionsTabPageHelper::GetI18nNumbering(m_xNumberFormatBox->get_widget(), std::numeric_limits<sal_uInt16>::max()); +} + +SvxPageDescPage::~SvxPageDescPage() +{ + if(mbDelPrinter) + { + mpDefPrinter.disposeAndClear(); + mbDelPrinter = false; + } +} + +void SvxPageDescPage::Init_Impl() +{ + // adjust the handler + m_xLayoutBox->connect_changed(LINK(this, SvxPageDescPage, LayoutHdl_Impl)); + + m_xPaperSizeBox->connect_changed(LINK(this, SvxPageDescPage, PaperSizeSelect_Impl)); + m_xPaperWidthEdit->connect_value_changed( LINK(this, SvxPageDescPage, PaperSizeModify_Impl)); + m_xPaperHeightEdit->connect_value_changed(LINK(this, SvxPageDescPage, PaperSizeModify_Impl)); + m_xLandscapeBtn->connect_clicked(LINK(this, SvxPageDescPage, SwapOrientation_Impl)); + m_xPortraitBtn->connect_clicked(LINK(this, SvxPageDescPage, SwapOrientation_Impl)); + + Link<weld::MetricSpinButton&, void> aLink = LINK(this, SvxPageDescPage, BorderModify_Impl); + m_xLeftMarginEdit->connect_value_changed(aLink); + m_xRightMarginEdit->connect_value_changed(aLink); + m_xTopMarginEdit->connect_value_changed(aLink); + m_xBottomMarginEdit->connect_value_changed(aLink); + + m_xHorzBox->connect_toggled(LINK(this, SvxPageDescPage, CenterHdl_Impl)); + m_xVertBox->connect_toggled(LINK(this, SvxPageDescPage, CenterHdl_Impl)); +} + +void SvxPageDescPage::Reset( const SfxItemSet* rSet ) +{ + SfxItemPool* pPool = rSet->GetPool(); + DBG_ASSERT( pPool, "Where is the pool?" ); + MapUnit eUnit = pPool->GetMetric( GetWhich( SID_ATTR_LRSPACE ) ); + + // adjust margins (right/left) + const SfxPoolItem* pItem = GetItem( *rSet, SID_ATTR_LRSPACE ); + + if ( pItem ) + { + const SvxLRSpaceItem& rLRSpace = static_cast<const SvxLRSpaceItem&>(*pItem); + SetMetricValue( *m_xLeftMarginEdit, rLRSpace.GetLeft(), eUnit ); + m_aBspWin.SetLeft( + static_cast<sal_uInt16>(ConvertLong_Impl( rLRSpace.GetLeft(), eUnit )) ); + SetMetricValue( *m_xRightMarginEdit, rLRSpace.GetRight(), eUnit ); + m_aBspWin.SetRight( + static_cast<sal_uInt16>(ConvertLong_Impl( rLRSpace.GetRight(), eUnit )) ); + } + + // adjust margins (top/bottom) + pItem = GetItem( *rSet, SID_ATTR_ULSPACE ); + + if ( pItem ) + { + const SvxULSpaceItem& rULSpace = static_cast<const SvxULSpaceItem&>(*pItem); + SetMetricValue( *m_xTopMarginEdit, rULSpace.GetUpper(), eUnit ); + m_aBspWin.SetTop( + static_cast<sal_uInt16>(ConvertLong_Impl( static_cast<long>(rULSpace.GetUpper()), eUnit )) ); + SetMetricValue( *m_xBottomMarginEdit, rULSpace.GetLower(), eUnit ); + m_aBspWin.SetBottom( + static_cast<sal_uInt16>(ConvertLong_Impl( static_cast<long>(rULSpace.GetLower()), eUnit )) ); + } + + // general page data + SvxNumType eNumType = SVX_NUM_ARABIC; + bLandscape = ( mpDefPrinter->GetOrientation() == Orientation::Landscape ); + SvxPageUsage nUse = SvxPageUsage::All; + pItem = GetItem( *rSet, SID_ATTR_PAGE ); + + if ( pItem ) + { + const SvxPageItem& rItem = static_cast<const SvxPageItem&>(*pItem); + eNumType = rItem.GetNumType(); + nUse = rItem.GetPageUsage(); + bLandscape = rItem.IsLandscape(); + } + + // alignment + m_xLayoutBox->set_active(::PageUsageToPos_Impl(nUse)); + m_aBspWin.SetUsage( nUse ); + LayoutHdl_Impl( *m_xLayoutBox ); + + //adjust numeration type of the page style + m_xNumberFormatBox->set_active_id(eNumType); + + m_xPaperTrayBox->clear(); + sal_uInt8 nPaperBin = PAPERBIN_PRINTER_SETTINGS; + pItem = GetItem( *rSet, SID_ATTR_PAGE_PAPERBIN ); + + if ( pItem ) + { + nPaperBin = static_cast<const SvxPaperBinItem*>(pItem)->GetValue(); + + if ( nPaperBin >= mpDefPrinter->GetPaperBinCount() ) + nPaperBin = PAPERBIN_PRINTER_SETTINGS; + } + + OUString aBinName; + + if ( PAPERBIN_PRINTER_SETTINGS == nPaperBin ) + aBinName = EditResId(RID_SVXSTR_PAPERBIN_SETTINGS); + else + aBinName = mpDefPrinter->GetPaperBinName( static_cast<sal_uInt16>(nPaperBin) ); + + m_xPaperTrayBox->append(OUString::number(nPaperBin), aBinName); + m_xPaperTrayBox->set_active_text(aBinName); + // reset focus handler to default first so know none already connected + m_xPaperTrayBox->connect_focus_in(Link<weld::Widget&, void>()); + // update the list when widget gets focus + m_xPaperTrayBox->connect_focus_in(LINK(this, SvxPageDescPage, PaperBinHdl_Impl)); + + Size aPaperSize = SvxPaperInfo::GetPaperSize( mpDefPrinter ); + pItem = GetItem( *rSet, SID_ATTR_PAGE_SIZE ); + + if ( pItem ) + aPaperSize = static_cast<const SvxSizeItem*>(pItem)->GetSize(); + + bool bOrientationSupport = + mpDefPrinter->HasSupport( PrinterSupport::SetOrientation ); + + if ( !bOrientationSupport && + aPaperSize.Width() > aPaperSize.Height() ) + bLandscape = true; + + // tdf#130548 disable callbacks on the other of a pair of the radiogroup + // when toggling its partner + m_xLandscapeBtn->connect_clicked(Link<weld::Button&, void>()); + m_xPortraitBtn->connect_clicked(Link<weld::Button&, void>()); + + m_xLandscapeBtn->set_active(bLandscape); + m_xPortraitBtn->set_active(!bLandscape); + + m_xLandscapeBtn->connect_clicked(LINK(this, SvxPageDescPage, SwapOrientation_Impl)); + m_xPortraitBtn->connect_clicked(LINK(this, SvxPageDescPage, SwapOrientation_Impl)); + + m_aBspWin.SetSize( Size( ConvertLong_Impl( aPaperSize.Width(), eUnit ), + ConvertLong_Impl( aPaperSize.Height(), eUnit ) ) ); + + aPaperSize = OutputDevice::LogicToLogic(aPaperSize, MapMode(eUnit), MapMode(MapUnit::Map100thMM)); + if ( bLandscape ) + Swap( aPaperSize ); + + // Actual Paper Format + Paper ePaper = SvxPaperInfo::GetSvxPaper( aPaperSize, MapUnit::Map100thMM ); + + if ( PAPER_USER != ePaper ) + aPaperSize = SvxPaperInfo::GetPaperSize( ePaper, MapUnit::Map100thMM ); + + if ( bLandscape ) + Swap( aPaperSize ); + + // write values into the edits + SetMetricValue( *m_xPaperHeightEdit, aPaperSize.Height(), MapUnit::Map100thMM ); + SetMetricValue( *m_xPaperWidthEdit, aPaperSize.Width(), MapUnit::Map100thMM ); + m_xPaperSizeBox->clear(); + + m_xPaperSizeBox->FillPaperSizeEntries( ( ePaperStart == PAPER_A3 ) ? PaperSizeApp::Std : PaperSizeApp::Draw ); + m_xPaperSizeBox->set_active_id( ePaper ); + + // application specific + + switch ( eMode ) + { + case SVX_PAGE_MODE_CENTER: + { + m_xTblAlignFT->show(); + m_xHorzBox->show(); + m_xVertBox->show(); + DisableVerticalPageDir(); + + // horizontal alignment + pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT1 ); + m_xHorzBox->set_active(pItem && static_cast<const SfxBoolItem*>(pItem)->GetValue()); + + // vertical alignment + pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT2 ); + m_xVertBox->set_active(pItem && static_cast<const SfxBoolItem*>(pItem)->GetValue()); + + // set example window on the table + m_aBspWin.SetTable( true ); + m_aBspWin.SetHorz(m_xHorzBox->get_active()); + m_aBspWin.SetVert(m_xVertBox->get_active()); + + break; + } + + case SVX_PAGE_MODE_PRESENTATION: + { + DisableVerticalPageDir(); + m_xAdaptBox->show(); + pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT1 ); + m_xAdaptBox->set_active( pItem && + static_cast<const SfxBoolItem*>(pItem)->GetValue() ); + + //!!! hidden, because not implemented by StarDraw + m_xLayoutBox->hide(); + m_xPageText->hide(); + + break; + } + default: ;//prevent warning + } + + + // display background and border in the example + ResetBackground_Impl( *rSet ); +//! UpdateExample_Impl(); + RangeHdl_Impl(); + + InitHeadFoot_Impl( *rSet ); + + bBorderModified = false; + SwapFirstValues_Impl( false ); + UpdateExample_Impl(); + + m_xLeftMarginEdit->save_value(); + m_xRightMarginEdit->save_value(); + m_xTopMarginEdit->save_value(); + m_xBottomMarginEdit->save_value(); + m_xLayoutBox->save_value(); + m_xNumberFormatBox->save_value(); + m_xPaperSizeBox->save_value(); + m_xPaperWidthEdit->save_value(); + m_xPaperHeightEdit->save_value(); + m_xPortraitBtn->save_state(); + m_xLandscapeBtn->save_state(); + m_xPaperTrayBox->save_value(); + m_xVertBox->save_state(); + m_xHorzBox->save_state(); + m_xAdaptBox->save_state(); + + CheckMarginEdits( true ); + + + if(SfxItemState::SET == rSet->GetItemState(SID_SWREGISTER_MODE)) + { + m_xRegisterCB->set_active(static_cast<const SfxBoolItem&>(rSet->Get( + SID_SWREGISTER_MODE)).GetValue()); + m_xRegisterCB->save_state(); + RegisterModify(*m_xRegisterCB); + } + if(SfxItemState::SET == rSet->GetItemState(SID_SWREGISTER_COLLECTION)) + { + m_xRegisterLB->set_active_text( + static_cast<const SfxStringItem&>(rSet->Get(SID_SWREGISTER_COLLECTION)).GetValue()); + m_xRegisterLB->save_value(); + } + + SfxItemState eState = rSet->GetItemState( GetWhich( SID_ATTR_FRAMEDIRECTION ), + true, &pItem ); + if( SfxItemState::UNKNOWN != eState ) + { + SvxFrameDirection nVal = SfxItemState::SET == eState + ? static_cast<const SvxFrameDirectionItem*>(pItem)->GetValue() + : SvxFrameDirection::Horizontal_LR_TB; + m_xTextFlowBox->set_active_id(nVal); + + m_xTextFlowBox->save_value(); + m_aBspWin.SetFrameDirection(nVal); + } +} + +void SvxPageDescPage::FillUserData() +{ + if (SVX_PAGE_MODE_PRESENTATION == eMode) + SetUserData(m_xAdaptBox->get_active() ? OUString("1") : OUString("0")) ; + +} + +bool SvxPageDescPage::FillItemSet( SfxItemSet* rSet ) +{ + bool bModified = false; + const SfxItemSet& rOldSet = GetItemSet(); + SfxItemPool* pPool = rOldSet.GetPool(); + DBG_ASSERT( pPool, "Where is the pool?" ); + sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE ); + MapUnit eUnit = pPool->GetMetric( nWhich ); + const SfxPoolItem* pOld = nullptr; + + // copy old left and right margins + SvxLRSpaceItem aMargin( static_cast<const SvxLRSpaceItem&>(rOldSet.Get( nWhich )) ); + + // copy old top and bottom margins + nWhich = GetWhich( SID_ATTR_ULSPACE ); + SvxULSpaceItem aTopMargin( static_cast<const SvxULSpaceItem&>(rOldSet.Get( nWhich )) ); + + if (m_xLeftMarginEdit->get_value_changed_from_saved()) + { + aMargin.SetLeft( static_cast<sal_uInt16>(GetCoreValue( *m_xLeftMarginEdit, eUnit )) ); + bModified = true; + } + + if (m_xRightMarginEdit->get_value_changed_from_saved()) + { + aMargin.SetRight( static_cast<sal_uInt16>(GetCoreValue( *m_xRightMarginEdit, eUnit )) ); + bModified = true; + } + + // set left and right margins + if (bModified) + { + pOld = GetOldItem( *rSet, SID_ATTR_LRSPACE ); + + if ( !pOld || *static_cast<const SvxLRSpaceItem*>(pOld) != aMargin ) + rSet->Put( aMargin ); + else + bModified = false; + } + + bool bMod = false; + + if (m_xTopMarginEdit->get_value_changed_from_saved()) + { + aTopMargin.SetUpper( static_cast<sal_uInt16>(GetCoreValue( *m_xTopMarginEdit, eUnit )) ); + bMod = true; + } + + if (m_xBottomMarginEdit->get_value_changed_from_saved()) + { + aTopMargin.SetLower( static_cast<sal_uInt16>(GetCoreValue( *m_xBottomMarginEdit, eUnit )) ); + bMod = true; + } + + // set top and bottom margins + + if ( bMod ) + { + pOld = GetOldItem( *rSet, SID_ATTR_ULSPACE ); + + if ( !pOld || *static_cast<const SvxULSpaceItem*>(pOld) != aTopMargin ) + { + bModified = true; + rSet->Put( aTopMargin ); + } + } + + // paper tray + nWhich = GetWhich( SID_ATTR_PAGE_PAPERBIN ); + sal_Int32 nPos = m_xPaperTrayBox->get_active(); + sal_uInt16 nBin = m_xPaperTrayBox->get_id(nPos).toInt32(); + pOld = GetOldItem( *rSet, SID_ATTR_PAGE_PAPERBIN ); + + if ( !pOld || static_cast<const SvxPaperBinItem*>(pOld)->GetValue() != nBin ) + { + rSet->Put( SvxPaperBinItem( nWhich, static_cast<sal_uInt8>(nBin) ) ); + bModified = true; + } + + Paper ePaper = m_xPaperSizeBox->get_active_id(); + bool bChecked = m_xLandscapeBtn->get_active(); + + if ( PAPER_USER == ePaper ) + { + if ( m_xPaperSizeBox->get_value_changed_from_saved() || + m_xPaperWidthEdit->get_value_changed_from_saved() || + m_xPaperHeightEdit->get_value_changed_from_saved() || + m_xLandscapeBtn->get_state_changed_from_saved() ) + { + Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ), + GetCoreValue( *m_xPaperHeightEdit, eUnit ) ); + pOld = GetOldItem( *rSet, SID_ATTR_PAGE_SIZE ); + + if ( !pOld || static_cast<const SvxSizeItem*>(pOld)->GetSize() != aSize ) + { + rSet->Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) ); + bModified = true; + } + } + } + else + { + if (m_xPaperSizeBox->get_value_changed_from_saved() || m_xLandscapeBtn->get_state_changed_from_saved()) + { + Size aSize( SvxPaperInfo::GetPaperSize( ePaper, eUnit ) ); + + if ( bChecked ) + Swap( aSize ); + + pOld = GetOldItem( *rSet, SID_ATTR_PAGE_SIZE ); + + if ( !pOld || static_cast<const SvxSizeItem*>(pOld)->GetSize() != aSize ) + { + rSet->Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) ); + bModified = true; + } + } + } + + nWhich = GetWhich( SID_ATTR_PAGE ); + SvxPageItem aPage( static_cast<const SvxPageItem&>(rOldSet.Get( nWhich )) ); + bMod = m_xLayoutBox->get_value_changed_from_saved(); + + if ( bMod ) + aPage.SetPageUsage(::PosToPageUsage_Impl(m_xLayoutBox->get_active())); + + if (m_xLandscapeBtn->get_state_changed_from_saved()) + { + aPage.SetLandscape(bChecked); + bMod = true; + } + + //Get the NumType value + if (m_xNumberFormatBox->get_value_changed_from_saved()) + { + SvxNumType nEntryData = m_xNumberFormatBox->get_active_id(); + aPage.SetNumType( nEntryData ); + bMod = true; + } + + if ( bMod ) + { + pOld = GetOldItem( *rSet, SID_ATTR_PAGE ); + + if ( !pOld || *static_cast<const SvxPageItem*>(pOld) != aPage ) + { + rSet->Put( aPage ); + bModified = true; + } + } + else if ( SfxItemState::DEFAULT == rOldSet.GetItemState( nWhich ) ) + rSet->ClearItem( nWhich ); + else + rSet->Put( rOldSet.Get( nWhich ) ); + + // evaluate mode specific controls + + switch ( eMode ) + { + case SVX_PAGE_MODE_CENTER: + { + if (m_xHorzBox->get_state_changed_from_saved()) + { + SfxBoolItem aHorz( GetWhich( SID_ATTR_PAGE_EXT1 ), + m_xHorzBox->get_active() ); + rSet->Put( aHorz ); + bModified = true; + } + + if (m_xVertBox->get_state_changed_from_saved()) + { + SfxBoolItem aVert( GetWhich( SID_ATTR_PAGE_EXT2 ), + m_xVertBox->get_active() ); + rSet->Put( aVert ); + bModified = true; + } + break; + } + + case SVX_PAGE_MODE_PRESENTATION: + { + // always put so that draw can evaluate this + rSet->Put( SfxBoolItem( GetWhich( SID_ATTR_PAGE_EXT1 ), + m_xAdaptBox->get_active() ) ); + bModified = true; + break; + } + default: ;//prevent warning + + } + + if (m_xRegisterCB->get_visible() && + (m_xRegisterCB->get_active() || m_xRegisterCB->get_state_changed_from_saved())) + { + const SfxBoolItem& rRegItem = static_cast<const SfxBoolItem&>(rOldSet.Get(SID_SWREGISTER_MODE)); + std::unique_ptr<SfxBoolItem> pRegItem(rRegItem.Clone()); + bool bCheck = m_xRegisterCB->get_active(); + pRegItem->SetValue(bCheck); + rSet->Put(std::move(pRegItem)); + bModified = true; + if(bCheck) + { + bModified = true; + rSet->Put(SfxStringItem(SID_SWREGISTER_COLLECTION, + m_xRegisterLB->get_active_text())); + } + } + + if (m_xTextFlowBox->get_visible() && m_xTextFlowBox->get_value_changed_from_saved()) + { + SvxFrameDirection eDirection = m_xTextFlowBox->get_active_id(); + rSet->Put( SvxFrameDirectionItem( eDirection, GetWhich( SID_ATTR_FRAMEDIRECTION ) ) ); + bModified = true; + } + + return bModified; +} + +IMPL_LINK_NOARG(SvxPageDescPage, LayoutHdl_Impl, weld::ComboBox&, void) +{ + // switch inside outside + const SvxPageUsage nUsage = PosToPageUsage_Impl(m_xLayoutBox->get_active()); + + if (nUsage == SvxPageUsage::Mirror) + { + m_xLeftMarginLbl->hide(); + m_xRightMarginLbl->hide(); + m_xInsideLbl->show(); + m_xOutsideLbl->show(); + } + else + { + m_xLeftMarginLbl->show(); + m_xRightMarginLbl->show(); + m_xInsideLbl->hide(); + m_xOutsideLbl->hide(); + } + UpdateExample_Impl( true ); +} + +IMPL_LINK_NOARG(SvxPageDescPage, PaperBinHdl_Impl, weld::Widget&, void) +{ + // tdf#124226 disconnect so not called again, unless Reset occurs + m_xPaperTrayBox->connect_focus_in(Link<weld::Widget&, void>()); + + OUString aOldName = m_xPaperTrayBox->get_active_text(); + m_xPaperTrayBox->freeze(); + m_xPaperTrayBox->clear(); + m_xPaperTrayBox->append(OUString::number(PAPERBIN_PRINTER_SETTINGS), EditResId(RID_SVXSTR_PAPERBIN_SETTINGS)); + OUString aPaperBin(EditResId(RID_SVXSTR_PAPERBIN)); + const sal_uInt16 nBinCount = mpDefPrinter->GetPaperBinCount(); + + for (sal_uInt16 i = 0; i < nBinCount; ++i) + { + OUString aName = mpDefPrinter->GetPaperBinName(i); + if (aName.isEmpty()) + { + aName = aPaperBin + " " + OUString::number( i+1 ); + } + m_xPaperTrayBox->append(OUString::number(i), aName); + } + m_xPaperTrayBox->set_active_text(aOldName); + m_xPaperTrayBox->thaw(); + + // tdf#123650 explicitly grab-focus after the modification otherwise gtk loses track + // of there the focus should be + m_xPaperTrayBox->grab_focus(); +} + +IMPL_LINK_NOARG(SvxPageDescPage, PaperSizeSelect_Impl, weld::ComboBox&, void) +{ + Paper ePaper = m_xPaperSizeBox->get_active_id(); + + if ( ePaper == PAPER_USER ) + return; + + Size aSize( SvxPaperInfo::GetPaperSize( ePaper, MapUnit::Map100thMM ) ); + + if (m_xLandscapeBtn->get_active()) + Swap( aSize ); + + if ( aSize.Height() < m_xPaperHeightEdit->get_min( FieldUnit::MM_100TH ) ) + m_xPaperHeightEdit->set_min( + m_xPaperHeightEdit->normalize( aSize.Height() ), FieldUnit::MM_100TH ); + if ( aSize.Width() < m_xPaperWidthEdit->get_min( FieldUnit::MM_100TH ) ) + m_xPaperWidthEdit->set_min( + m_xPaperWidthEdit->normalize( aSize.Width() ), FieldUnit::MM_100TH ); + SetMetricValue( *m_xPaperHeightEdit, aSize.Height(), MapUnit::Map100thMM ); + SetMetricValue( *m_xPaperWidthEdit, aSize.Width(), MapUnit::Map100thMM ); + + CalcMargin_Impl(); + + RangeHdl_Impl(); + UpdateExample_Impl( true ); + + if ( eMode != SVX_PAGE_MODE_PRESENTATION ) + return; + + // Draw: if paper format the margin shall be 1 cm + long nTmp = 0; + bool bScreen = (( PAPER_SCREEN_4_3 == ePaper )||( PAPER_SCREEN_16_9 == ePaper)||( PAPER_SCREEN_16_10 == ePaper)); + + if ( !bScreen ) + // no margin if screen + nTmp = 1; // accordingly 1 cm + + if ( bScreen || m_xRightMarginEdit->get_value(FieldUnit::NONE) == 0 ) + SetMetricValue( *m_xRightMarginEdit, nTmp, MapUnit::MapCM ); + if ( bScreen || m_xLeftMarginEdit->get_value(FieldUnit::NONE) == 0 ) + SetMetricValue( *m_xLeftMarginEdit, nTmp, MapUnit::MapCM ); + if ( bScreen || m_xBottomMarginEdit->get_value(FieldUnit::NONE) == 0 ) + SetMetricValue( *m_xBottomMarginEdit, nTmp, MapUnit::MapCM ); + if ( bScreen || m_xTopMarginEdit->get_value(FieldUnit::NONE) == 0 ) + SetMetricValue( *m_xTopMarginEdit, nTmp, MapUnit::MapCM ); + UpdateExample_Impl( true ); +} + +IMPL_LINK_NOARG(SvxPageDescPage, PaperSizeModify_Impl, weld::MetricSpinButton&, void) +{ + sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE ); + MapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWhich ); + Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ), + GetCoreValue( *m_xPaperHeightEdit, eUnit ) ); + + if ( aSize.Width() > aSize.Height() ) + { + m_xLandscapeBtn->set_active(true); + bLandscape = true; + } + else + { + m_xPortraitBtn->set_active(true); + bLandscape = false; + } + + Paper ePaper = SvxPaperInfo::GetSvxPaper( aSize, eUnit ); + m_xPaperSizeBox->set_active_id( ePaper ); + UpdateExample_Impl( true ); + + RangeHdl_Impl(); +} + +IMPL_LINK(SvxPageDescPage, SwapOrientation_Impl, weld::Button&, rBtn, void) +{ + if ( + !((!bLandscape && &rBtn == m_xLandscapeBtn.get()) || + (bLandscape && &rBtn == m_xPortraitBtn.get())) + ) + return; + + bLandscape = m_xLandscapeBtn->get_active(); + + const long lWidth = GetCoreValue( *m_xPaperWidthEdit, MapUnit::Map100thMM ); + const long lHeight = GetCoreValue( *m_xPaperHeightEdit, MapUnit::Map100thMM ); + + // swap width and height + SetMetricValue(*m_xPaperWidthEdit, lHeight, MapUnit::Map100thMM); + SetMetricValue(*m_xPaperHeightEdit, lWidth, MapUnit::Map100thMM); + + // recalculate margins if necessary + CalcMargin_Impl(); + + PaperSizeSelect_Impl(m_xPaperSizeBox->get_widget()); + RangeHdl_Impl(); + SwapFirstValues_Impl(bBorderModified); + UpdateExample_Impl(true); +} + +void SvxPageDescPage::SwapFirstValues_Impl( bool bSet ) +{ + MapMode aOldMode = mpDefPrinter->GetMapMode(); + Orientation eOri = Orientation::Portrait; + + if ( bLandscape ) + eOri = Orientation::Landscape; + Orientation eOldOri = mpDefPrinter->GetOrientation(); + mpDefPrinter->SetOrientation( eOri ); + mpDefPrinter->SetMapMode(MapMode(MapUnit::MapTwip)); + + // set first- and last-values for margins + Size aPaperSize = mpDefPrinter->GetPaperSize(); + Size aPrintSize = mpDefPrinter->GetOutputSize(); + /* + * To convert a point ( 0,0 ) into logic coordinates + * looks like nonsense; but it makes sense if the + * coordinate system's origin has been moved. + */ + Point aPrintOffset = mpDefPrinter->GetPageOffset() - mpDefPrinter->PixelToLogic( Point() ); + mpDefPrinter->SetMapMode( aOldMode ); + mpDefPrinter->SetOrientation( eOldOri ); + + sal_Int64 nSetL = m_xLeftMarginEdit->denormalize( + m_xLeftMarginEdit->get_value( FieldUnit::TWIP ) ); + sal_Int64 nSetR = m_xRightMarginEdit->denormalize( + m_xRightMarginEdit->get_value( FieldUnit::TWIP ) ); + sal_Int64 nSetT = m_xTopMarginEdit->denormalize( + m_xTopMarginEdit->get_value( FieldUnit::TWIP ) ); + sal_Int64 nSetB = m_xBottomMarginEdit->denormalize( + m_xBottomMarginEdit->get_value( FieldUnit::TWIP ) ); + + long nNewL = aPrintOffset.X(); + long nNewR = aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X(); + long nNewT = aPrintOffset.Y(); + long nNewB = aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y(); + + nFirstLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(nNewL), FieldUnit::TWIP); + nFirstRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(nNewR), FieldUnit::TWIP); + nFirstTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(nNewT), FieldUnit::TWIP); + nFirstBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(nNewB), FieldUnit::TWIP); + + if ( !bSet ) + return; + + if ( nSetL < nNewL ) + m_xLeftMarginEdit->set_value( m_xLeftMarginEdit->normalize( nNewL ), + FieldUnit::TWIP ); + if ( nSetR < nNewR ) + m_xRightMarginEdit->set_value( m_xRightMarginEdit->normalize( nNewR ), + FieldUnit::TWIP ); + if ( nSetT < nNewT ) + m_xTopMarginEdit->set_value( m_xTopMarginEdit->normalize( nNewT ), + FieldUnit::TWIP ); + if ( nSetB < nNewB ) + m_xBottomMarginEdit->set_value( m_xBottomMarginEdit->normalize( nNewB ), + FieldUnit::TWIP ); +} + +IMPL_LINK_NOARG(SvxPageDescPage, BorderModify_Impl, weld::MetricSpinButton&, void) +{ + if ( !bBorderModified ) + bBorderModified = true; + UpdateExample_Impl(); + + RangeHdl_Impl(); +} + +void SvxPageDescPage::UpdateExample_Impl( bool bResetbackground ) +{ + // Size + Size aSize( GetCoreValue( *m_xPaperWidthEdit, MapUnit::MapTwip ), + GetCoreValue( *m_xPaperHeightEdit, MapUnit::MapTwip ) ); + + m_aBspWin.SetSize( aSize ); + + // Margins + m_aBspWin.SetTop( GetCoreValue( *m_xTopMarginEdit, MapUnit::MapTwip ) ); + m_aBspWin.SetBottom( GetCoreValue( *m_xBottomMarginEdit, MapUnit::MapTwip ) ); + m_aBspWin.SetLeft( GetCoreValue( *m_xLeftMarginEdit, MapUnit::MapTwip ) ); + m_aBspWin.SetRight( GetCoreValue( *m_xRightMarginEdit, MapUnit::MapTwip ) ); + + // Layout + m_aBspWin.SetUsage(PosToPageUsage_Impl(m_xLayoutBox->get_active())); + if ( bResetbackground ) + m_aBspWin.ResetBackground(); + m_aBspWin.Invalidate(); +} + + +void SvxPageDescPage::ResetBackground_Impl(const SfxItemSet& rSet) +{ + sal_uInt16 nWhich(GetWhich(SID_ATTR_PAGE_HEADERSET)); + + if (SfxItemState::SET == rSet.GetItemState(nWhich, false)) + { + const SvxSetItem& rSetItem = static_cast< const SvxSetItem& >(rSet.Get(nWhich, false)); + const SfxItemSet& rTmpSet = rSetItem.GetItemSet(); + const SfxBoolItem& rOn = static_cast< const SfxBoolItem& >(rTmpSet.Get(GetWhich(SID_ATTR_PAGE_ON))); + + if(rOn.GetValue()) + { + drawinglayer::attribute::SdrAllFillAttributesHelperPtr aHeaderFillAttributes; + + if(mbEnableDrawingLayerFillStyles) + { + // create FillAttributes directly from DrawingLayer FillStyle entries + aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rTmpSet); + } + else + { + nWhich = GetWhich(SID_ATTR_BRUSH); + + if(SfxItemState::SET == rTmpSet.GetItemState(nWhich)) + { + // create FillAttributes from SvxBrushItem + const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rTmpSet.Get(nWhich)); + SfxItemSet aTempSet(*rTmpSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{}); + + setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); + aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet); + } + } + + m_aBspWin.setHeaderFillAttributes(aHeaderFillAttributes); + } + } + + nWhich = GetWhich(SID_ATTR_PAGE_FOOTERSET); + + if (SfxItemState::SET == rSet.GetItemState(nWhich, false)) + { + const SvxSetItem& rSetItem = static_cast< const SvxSetItem& >(rSet.Get(nWhich,false)); + const SfxItemSet& rTmpSet = rSetItem.GetItemSet(); + const SfxBoolItem& rOn = static_cast< const SfxBoolItem& >(rTmpSet.Get(GetWhich(SID_ATTR_PAGE_ON))); + + if(rOn.GetValue()) + { + drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFooterFillAttributes; + + if(mbEnableDrawingLayerFillStyles) + { + // create FillAttributes directly from DrawingLayer FillStyle entries + aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rTmpSet); + } + else + { + nWhich = GetWhich(SID_ATTR_BRUSH); + + if(SfxItemState::SET == rTmpSet.GetItemState(nWhich)) + { + // create FillAttributes from SvxBrushItem + const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rTmpSet.Get(nWhich)); + SfxItemSet aTempSet(*rTmpSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{}); + + setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); + aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet); + } + } + + m_aBspWin.setFooterFillAttributes(aFooterFillAttributes); + } + } + + drawinglayer::attribute::SdrAllFillAttributesHelperPtr aPageFillAttributes; + const SfxPoolItem* pItem = nullptr; + + if(mbEnableDrawingLayerFillStyles) + { + // create FillAttributes directly from DrawingLayer FillStyle entries + aPageFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rSet); + } + else + { + pItem = GetItem(rSet, SID_ATTR_BRUSH); + + if(pItem) + { + // create FillAttributes from SvxBrushItem + const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(*pItem); + SfxItemSet aTempSet(*rSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{}); + + setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); + aPageFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet); + } + } + + m_aBspWin.setPageFillAttributes(aPageFillAttributes); +} + +void SvxPageDescPage::InitHeadFoot_Impl( const SfxItemSet& rSet ) +{ + bLandscape = m_xLandscapeBtn->get_active(); + const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE ); + + if ( pItem ) + m_aBspWin.SetSize( static_cast<const SvxSizeItem*>(pItem)->GetSize() ); + + const SvxSetItem* pSetItem = nullptr; + + // evaluate header attributes + + if ( SfxItemState::SET == + rSet.GetItemState( GetWhich( SID_ATTR_PAGE_HEADERSET ), + false, reinterpret_cast<const SfxPoolItem**>(&pSetItem) ) ) + { + const SfxItemSet& rHeaderSet = pSetItem->GetItemSet(); + const SfxBoolItem& rHeaderOn = + static_cast<const SfxBoolItem&>(rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_ON ) )); + + if ( rHeaderOn.GetValue() ) + { + const SvxSizeItem& rSize = static_cast<const SvxSizeItem&>( + rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) )); + const SvxULSpaceItem& rUL = static_cast<const SvxULSpaceItem&>( + rHeaderSet.Get( GetWhich( SID_ATTR_ULSPACE ) )); + long nDist = rUL.GetLower(); + m_aBspWin.SetHdHeight( rSize.GetSize().Height() - nDist ); + m_aBspWin.SetHdDist( nDist ); + const SvxLRSpaceItem& rLR = static_cast<const SvxLRSpaceItem&>( + rHeaderSet.Get( GetWhich( SID_ATTR_LRSPACE ) )); + m_aBspWin.SetHdLeft( rLR.GetLeft() ); + m_aBspWin.SetHdRight( rLR.GetRight() ); + m_aBspWin.SetHeader( true ); + } + else + m_aBspWin.SetHeader( false ); + + // show background and border in the example + drawinglayer::attribute::SdrAllFillAttributesHelperPtr aHeaderFillAttributes; + + if(mbEnableDrawingLayerFillStyles) + { + // create FillAttributes directly from DrawingLayer FillStyle entries + aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rHeaderSet); + } + else + { + const sal_uInt16 nWhich(GetWhich(SID_ATTR_BRUSH)); + + if(rHeaderSet.GetItemState(nWhich) >= SfxItemState::DEFAULT) + { + // aBspWin.SetHdColor(rItem.GetColor()); + const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rHeaderSet.Get(nWhich)); + SfxItemSet aTempSet(*rHeaderSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{}); + + setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); + aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet); + } + } + + m_aBspWin.setHeaderFillAttributes(aHeaderFillAttributes); + } + + // evaluate footer attributes + + if ( SfxItemState::SET != + rSet.GetItemState( GetWhich( SID_ATTR_PAGE_FOOTERSET ), + false, reinterpret_cast<const SfxPoolItem**>(&pSetItem) ) ) + return; + + const SfxItemSet& rFooterSet = pSetItem->GetItemSet(); + const SfxBoolItem& rFooterOn = + static_cast<const SfxBoolItem&>(rFooterSet.Get( GetWhich( SID_ATTR_PAGE_ON ) )); + + if ( rFooterOn.GetValue() ) + { + const SvxSizeItem& rSize = static_cast<const SvxSizeItem&>( + rFooterSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) )); + const SvxULSpaceItem& rUL = static_cast<const SvxULSpaceItem&>( + rFooterSet.Get( GetWhich( SID_ATTR_ULSPACE ) )); + long nDist = rUL.GetUpper(); + m_aBspWin.SetFtHeight( rSize.GetSize().Height() - nDist ); + m_aBspWin.SetFtDist( nDist ); + const SvxLRSpaceItem& rLR = static_cast<const SvxLRSpaceItem&>( + rFooterSet.Get( GetWhich( SID_ATTR_LRSPACE ) )); + m_aBspWin.SetFtLeft( rLR.GetLeft() ); + m_aBspWin.SetFtRight( rLR.GetRight() ); + m_aBspWin.SetFooter( true ); + } + else + m_aBspWin.SetFooter( false ); + + // show background and border in the example + drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFooterFillAttributes; + + if(mbEnableDrawingLayerFillStyles) + { + // create FillAttributes directly from DrawingLayer FillStyle entries + aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rFooterSet); + } + else + { + const sal_uInt16 nWhich(GetWhich(SID_ATTR_BRUSH)); + + if(rFooterSet.GetItemState(nWhich) >= SfxItemState::DEFAULT) + { + // aBspWin.SetFtColor(rItem.GetColor()); + const SvxBrushItem& rItem = static_cast<const SvxBrushItem&>(rFooterSet.Get(nWhich)); + SfxItemSet aTempSet(*rFooterSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{}); + + setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); + aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet); + } + } + + m_aBspWin.setFooterFillAttributes(aFooterFillAttributes); +} + +void SvxPageDescPage::ActivatePage( const SfxItemSet& rSet ) +{ + InitHeadFoot_Impl( rSet ); + UpdateExample_Impl(); + ResetBackground_Impl( rSet ); + RangeHdl_Impl(); +} + +DeactivateRC SvxPageDescPage::DeactivatePage( SfxItemSet* _pSet ) +{ + // Inquiry whether the page margins are beyond the printing area. + // If not, ask user whether they shall be taken. + // If not, stay on the TabPage. + Paper ePaper = m_xPaperSizeBox->get_active_id(); + + if ( ePaper != PAPER_SCREEN_4_3 && ePaper != PAPER_SCREEN_16_9 && ePaper != PAPER_SCREEN_16_10 && IsMarginOutOfRange() ) + { + std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Question, VclButtonsType::YesNo, + m_xPrintRangeQueryText->get_label())); + xQueryBox->set_default_response(RET_NO); + if (xQueryBox->run() == RET_NO) + { + weld::MetricSpinButton* pField = nullptr; + if ( IsPrinterRangeOverflow( *m_xLeftMarginEdit, nFirstLeftMargin, nLastLeftMargin, MARGIN_LEFT ) ) + pField = m_xLeftMarginEdit.get(); + if ( IsPrinterRangeOverflow( *m_xRightMarginEdit, nFirstRightMargin, nLastRightMargin, MARGIN_RIGHT ) + && !pField ) + pField = m_xRightMarginEdit.get(); + if ( IsPrinterRangeOverflow( *m_xTopMarginEdit, nFirstTopMargin, nLastTopMargin, MARGIN_TOP ) + && !pField ) + pField = m_xTopMarginEdit.get(); + if ( IsPrinterRangeOverflow( *m_xBottomMarginEdit, nFirstBottomMargin, nLastBottomMargin, MARGIN_BOTTOM ) + && !pField ) + pField = m_xBottomMarginEdit.get(); + if ( pField ) + pField->grab_focus(); + UpdateExample_Impl(); + return DeactivateRC::KeepPage; + } + else + CheckMarginEdits( false ); + } + + if ( _pSet ) + { + FillItemSet( _pSet ); + + // put portray/landscape if applicable + sal_uInt16 nWh = GetWhich( SID_ATTR_PAGE_SIZE ); + MapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWh ); + Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ), + GetCoreValue( *m_xPaperHeightEdit, eUnit ) ); + + // put, if current size is different to the value in _pSet + const SvxSizeItem* pSize = GetItem( *_pSet, SID_ATTR_PAGE_SIZE ); + if ( aSize.Width() && ( !pSize || !IsEqualSize_Impl( pSize, aSize ) ) ) + _pSet->Put( SvxSizeItem( nWh, aSize ) ); + } + + return DeactivateRC::LeavePage; +} + +void SvxPageDescPage::RangeHdl_Impl() +{ + // example window + long nHHeight = m_aBspWin.GetHdHeight(); + long nHDist = m_aBspWin.GetHdDist(); + + long nFHeight = m_aBspWin.GetFtHeight(); + long nFDist = m_aBspWin.GetFtDist(); + + long nHFLeft = std::max(m_aBspWin.GetHdLeft(), m_aBspWin.GetFtLeft()); + long nHFRight = std::max(m_aBspWin.GetHdRight(), m_aBspWin.GetFtRight()); + + // current values for page margins + long nBT = static_cast<long>(m_xTopMarginEdit->denormalize(m_xTopMarginEdit->get_value(FieldUnit::TWIP))); + long nBB = static_cast<long>(m_xBottomMarginEdit->denormalize(m_xBottomMarginEdit->get_value(FieldUnit::TWIP))); + long nBL = static_cast<long>(m_xLeftMarginEdit->denormalize(m_xLeftMarginEdit->get_value(FieldUnit::TWIP))); + long nBR = static_cast<long>(m_xRightMarginEdit->denormalize(m_xRightMarginEdit->get_value(FieldUnit::TWIP))); + + // calculate width of page border + const SfxItemSet* _pSet = &GetItemSet(); + Size aBorder; + + if ( _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_SHADOW) ) >= + SfxItemState::DEFAULT && + _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_OUTER) ) >= + SfxItemState::DEFAULT ) + { + aBorder = GetMinBorderSpace_Impl( + static_cast<const SvxShadowItem&>(_pSet->Get(GetWhich(SID_ATTR_BORDER_SHADOW))), + static_cast<const SvxBoxItem&>(_pSet->Get(GetWhich(SID_ATTR_BORDER_OUTER)))); + } + + // limits paper + // maximum is 54 cm + + long nMin = nHHeight + nHDist + nFDist + nFHeight + nBT + nBB + + MINBODY + aBorder.Height(); + m_xPaperHeightEdit->set_min(m_xPaperHeightEdit->normalize(nMin), FieldUnit::TWIP); + + nMin = MINBODY + nBL + nBR + aBorder.Width(); + m_xPaperWidthEdit->set_min(m_xPaperWidthEdit->normalize(nMin), FieldUnit::TWIP); + + long nH = static_cast<long>(m_xPaperHeightEdit->denormalize(m_xPaperHeightEdit->get_value(FieldUnit::TWIP))); + long nW = static_cast<long>(m_xPaperWidthEdit->denormalize(m_xPaperWidthEdit->get_value(FieldUnit::TWIP))); + + // Top + long nMax = nH - nBB - aBorder.Height() - MINBODY - + nFDist - nFHeight - nHDist - nHHeight; + + m_xTopMarginEdit->set_max(m_xTopMarginEdit->normalize(nMax), FieldUnit::TWIP); + + // Bottom + nMax = nH - nBT - aBorder.Height() - MINBODY - + nFDist - nFHeight - nHDist - nHHeight; + + m_xBottomMarginEdit->set_max(m_xTopMarginEdit->normalize(nMax), FieldUnit::TWIP); + + // Left + nMax = nW - nBR - MINBODY - aBorder.Width() - nHFLeft - nHFRight; + m_xLeftMarginEdit->set_max(m_xLeftMarginEdit->normalize(nMax), FieldUnit::TWIP); + + // Right + nMax = nW - nBL - MINBODY - aBorder.Width() - nHFLeft - nHFRight; + m_xRightMarginEdit->set_max(m_xRightMarginEdit->normalize(nMax), FieldUnit::TWIP); +} + +void SvxPageDescPage::CalcMargin_Impl() +{ + // current values for page margins + long nBT = GetCoreValue( *m_xTopMarginEdit, MapUnit::MapTwip ); + long nBB = GetCoreValue( *m_xBottomMarginEdit, MapUnit::MapTwip ); + + long nBL = GetCoreValue( *m_xLeftMarginEdit, MapUnit::MapTwip ); + long nBR = GetCoreValue( *m_xRightMarginEdit, MapUnit::MapTwip ); + + long nH = GetCoreValue( *m_xPaperHeightEdit, MapUnit::MapTwip ); + long nW = GetCoreValue( *m_xPaperWidthEdit, MapUnit::MapTwip ); + + long nWidth = nBL + nBR + MINBODY; + long nHeight = nBT + nBB + MINBODY; + + if ( !(nWidth > nW || nHeight > nH) ) + return; + + if ( nWidth > nW ) + { + long nTmp = nBL <= nBR ? nBR : nBL; + nTmp -= nWidth - nW; + + if ( nBL <= nBR ) + SetMetricValue( *m_xRightMarginEdit, nTmp, MapUnit::MapTwip ); + else + SetMetricValue( *m_xLeftMarginEdit, nTmp, MapUnit::MapTwip ); + } + + if ( nHeight > nH ) + { + long nTmp = nBT <= nBB ? nBB : nBT; + nTmp -= nHeight - nH; + + if ( nBT <= nBB ) + SetMetricValue( *m_xBottomMarginEdit, nTmp, MapUnit::MapTwip ); + else + SetMetricValue( *m_xTopMarginEdit, nTmp, MapUnit::MapTwip ); + } +} + +IMPL_LINK_NOARG(SvxPageDescPage, CenterHdl_Impl, weld::ToggleButton&, void) +{ + m_aBspWin.SetHorz(m_xHorzBox->get_active()); + m_aBspWin.SetVert(m_xVertBox->get_active()); + UpdateExample_Impl(); +} + +void SvxPageDescPage::SetCollectionList(const std::vector<OUString> &aList) +{ + OSL_ENSURE(!aList.empty(), "Empty string list"); + + sStandardRegister = aList[0]; + m_xRegisterLB->freeze(); + for (size_t i = 1; i < aList.size(); ++i) + m_xRegisterLB->append_text(aList[i]); + m_xRegisterLB->thaw(); + + m_xRegisterCB->show(); + m_xRegisterFT->show(); + m_xRegisterLB->show(); + m_xRegisterCB->connect_toggled(LINK(this, SvxPageDescPage, RegisterModify)); +} + +IMPL_LINK(SvxPageDescPage, RegisterModify, weld::ToggleButton&, rBox, void) +{ + bool bEnable = false; + if (rBox.get_active()) + { + bEnable = true; + if (m_xRegisterLB->get_active() == -1) + m_xRegisterLB->set_active_text(sStandardRegister); + } + m_xRegisterFT->set_sensitive(bEnable); + m_xRegisterLB->set_sensitive(bEnable); +} + +void SvxPageDescPage::DisableVerticalPageDir() +{ + m_xTextFlowBox->remove_id(SvxFrameDirection::Vertical_RL_TB); + m_xTextFlowBox->remove_id(SvxFrameDirection::Vertical_LR_TB); + if (m_xTextFlowBox->get_count() < 2) + { + m_xTextFlowLbl->hide(); + m_xTextFlowBox->hide(); + m_aBspWin.EnableFrameDirection( false ); + } +} + +IMPL_LINK_NOARG(SvxPageDescPage, FrameDirectionModify_Impl, weld::ComboBox&, void) +{ + m_aBspWin.SetFrameDirection(m_xTextFlowBox->get_active_id()); + m_aBspWin.Invalidate(); +} + +bool SvxPageDescPage::IsPrinterRangeOverflow( + weld::MetricSpinButton& rField, long nFirstMargin, long nLastMargin, MarginPosition nPos ) +{ + bool bRet = false; + bool bCheck = ( ( m_nPos & nPos ) == 0 ); + long nValue = rField.get_value(FieldUnit::NONE); + if ( bCheck && + ( nValue < nFirstMargin || nValue > nLastMargin ) && + rField.get_value_changed_from_saved() ) + { + rField.set_value(nValue < nFirstMargin ? nFirstMargin : nLastMargin, FieldUnit::NONE); + bRet = true; + } + + return bRet; +} + +/** Check if a value of a margin edit is outside the printer paper margins + and save this information. +*/ +void SvxPageDescPage::CheckMarginEdits( bool _bClear ) +{ + if ( _bClear ) + m_nPos = 0; + + sal_Int64 nValue = m_xLeftMarginEdit->get_value(FieldUnit::NONE); + if ( nValue < nFirstLeftMargin || nValue > nLastLeftMargin ) + m_nPos |= MARGIN_LEFT; + nValue = m_xRightMarginEdit->get_value(FieldUnit::NONE); + if ( nValue < nFirstRightMargin || nValue > nLastRightMargin ) + m_nPos |= MARGIN_RIGHT; + nValue = m_xTopMarginEdit->get_value(FieldUnit::NONE); + if ( nValue < nFirstTopMargin || nValue > nLastTopMargin ) + m_nPos |= MARGIN_TOP; + nValue = m_xBottomMarginEdit->get_value(FieldUnit::NONE); + if ( nValue < nFirstBottomMargin || nValue > nLastBottomMargin ) + m_nPos |= MARGIN_BOTTOM; +} + +bool SvxPageDescPage::IsMarginOutOfRange() const +{ + bool bRet = ( ( ( !( m_nPos & MARGIN_LEFT ) && + m_xLeftMarginEdit->get_value_changed_from_saved() ) && + ( m_xLeftMarginEdit->get_value(FieldUnit::NONE) < nFirstLeftMargin || + m_xLeftMarginEdit->get_value(FieldUnit::NONE) > nLastLeftMargin ) ) || + ( ( !( m_nPos & MARGIN_RIGHT ) && + m_xRightMarginEdit->get_value_changed_from_saved() ) && + ( m_xRightMarginEdit->get_value(FieldUnit::NONE) < nFirstRightMargin || + m_xRightMarginEdit->get_value(FieldUnit::NONE) > nLastRightMargin ) ) || + ( ( !( m_nPos & MARGIN_TOP ) && + m_xTopMarginEdit->get_value_changed_from_saved() ) && + ( m_xTopMarginEdit->get_value(FieldUnit::NONE) < nFirstTopMargin || + m_xTopMarginEdit->get_value(FieldUnit::NONE) > nLastTopMargin ) ) || + ( ( !( m_nPos & MARGIN_BOTTOM ) && + m_xBottomMarginEdit->get_value_changed_from_saved() ) && + ( m_xBottomMarginEdit->get_value(FieldUnit::NONE) < nFirstBottomMargin || + m_xBottomMarginEdit->get_value(FieldUnit::NONE) > nLastBottomMargin ) ) ); + return bRet; +} + +void SvxPageDescPage::PageCreated(const SfxAllItemSet& aSet) +{ + const SfxUInt16Item* pModeItem = aSet.GetItem(SID_ENUM_PAGE_MODE, false); + const SfxUInt16Item* pPaperStartItem = aSet.GetItem(SID_PAPER_START, false); + const SfxUInt16Item* pPaperEndItem = aSet.GetItem(SID_PAPER_END, false); + const SfxStringListItem* pCollectListItem = aSet.GetItem<SfxStringListItem>(SID_COLLECT_LIST, false); + const SfxBoolItem* pSupportDrawingLayerFillStyleItem = aSet.GetItem<SfxBoolItem>(SID_DRAWINGLAYER_FILLSTYLES, false); + const SfxBoolItem* pIsImpressDoc = aSet.GetItem<SfxBoolItem>(SID_IMPRESS_DOC, false); + + if (pModeItem) + { + eMode = static_cast<SvxModeType>(pModeItem->GetValue()); + } + + if(pPaperStartItem && pPaperEndItem) + { + SetPaperFormatRanges(static_cast<Paper>(pPaperStartItem->GetValue())); + } + + if(pCollectListItem) + { + SetCollectionList(pCollectListItem->GetList()); + } + + if(pSupportDrawingLayerFillStyleItem) + { + const bool bNew(pSupportDrawingLayerFillStyleItem->GetValue()); + + mbEnableDrawingLayerFillStyles = bNew; + } + + if (pIsImpressDoc) + m_xNumberFormatText->set_label(SvxResId(STR_SLIDE_NUMBERS)); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |