diff options
Diffstat (limited to '')
| -rw-r--r-- | cui/source/tabpages/transfrm.cxx | 1584 |
1 files changed, 1584 insertions, 0 deletions
diff --git a/cui/source/tabpages/transfrm.cxx b/cui/source/tabpages/transfrm.cxx new file mode 100644 index 000000000..77c3b7e7e --- /dev/null +++ b/cui/source/tabpages/transfrm.cxx @@ -0,0 +1,1584 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <sal/config.h> + +#include <algorithm> + +#include <svx/EnhancedCustomShape2d.hxx> +#include <svx/svdundo.hxx> +#include <svx/svdview.hxx> +#include <svx/svdobj.hxx> +#include <svx/svdpagv.hxx> +#include <svx/svdoashp.hxx> +#include <svx/sderitm.hxx> +#include <svx/svxids.hrc> +#include <svx/transfrmhelper.hxx> +#include <svtools/unitconv.hxx> + +#include <transfrm.hxx> +#include <svx/dlgutil.hxx> +#include <svx/anchorid.hxx> +#include <svl/rectitem.hxx> +#include <swpossizetabpage.hxx> +#include <vcl/canvastools.hxx> +#include <vcl/fieldvalues.hxx> + +// static ---------------------------------------------------------------- + +const sal_uInt16 SvxPositionSizeTabPage::pPosSizeRanges[] = +{ + SID_ATTR_TRANSFORM_POS_X, + SID_ATTR_TRANSFORM_POS_Y, + SID_ATTR_TRANSFORM_PROTECT_POS, + SID_ATTR_TRANSFORM_PROTECT_POS, + SID_ATTR_TRANSFORM_INTERN, + SID_ATTR_TRANSFORM_INTERN, + SID_ATTR_TRANSFORM_ANCHOR, + SID_ATTR_TRANSFORM_VERT_ORIENT, + SID_ATTR_TRANSFORM_WIDTH, + SID_ATTR_TRANSFORM_SIZE_POINT, + SID_ATTR_TRANSFORM_PROTECT_POS, + SID_ATTR_TRANSFORM_INTERN, + SID_ATTR_TRANSFORM_AUTOWIDTH, + SID_ATTR_TRANSFORM_AUTOHEIGHT, + 0 +}; + +const sal_uInt16 SvxAngleTabPage::pAngleRanges[] = +{ + SID_ATTR_TRANSFORM_ROT_X, + SID_ATTR_TRANSFORM_ANGLE, + SID_ATTR_TRANSFORM_INTERN, + SID_ATTR_TRANSFORM_INTERN, + 0 +}; + +const sal_uInt16 SvxSlantTabPage::pSlantRanges[] = +{ + SDRATTR_ECKENRADIUS, + SDRATTR_ECKENRADIUS, + SID_ATTR_TRANSFORM_SHEAR, + SID_ATTR_TRANSFORM_SHEAR_VERTICAL, + SID_ATTR_TRANSFORM_INTERN, + SID_ATTR_TRANSFORM_INTERN, + 0 +}; + +/************************************************************************* +|* +|* constructor of the tab dialog: adds the pages to the dialog +|* +\************************************************************************/ + +SvxTransformTabDialog::SvxTransformTabDialog(weld::Window* pParent, const SfxItemSet* pAttr, + const SdrView* pSdrView, SvxAnchorIds nAnchorTypes) + : SfxTabDialogController(pParent, "cui/ui/positionsizedialog.ui", "PositionAndSizeDialog", pAttr) + , pView(pSdrView) + , nAnchorCtrls(nAnchorTypes) +{ + DBG_ASSERT(pView, "no valid view (!)"); + + //different positioning page in Writer + if(nAnchorCtrls & (SvxAnchorIds::Paragraph | SvxAnchorIds::Character | SvxAnchorIds::Page | SvxAnchorIds::Fly)) + { + AddTabPage("RID_SVXPAGE_SWPOSSIZE", SvxSwPosSizeTabPage::Create, SvxSwPosSizeTabPage::GetRanges); + RemoveTabPage("RID_SVXPAGE_POSITION_SIZE"); + } + else + { + AddTabPage("RID_SVXPAGE_POSITION_SIZE", SvxPositionSizeTabPage::Create, SvxPositionSizeTabPage::GetRanges); + RemoveTabPage("RID_SVXPAGE_SWPOSSIZE"); + } + + AddTabPage("RID_SVXPAGE_ANGLE", SvxAngleTabPage::Create, SvxAngleTabPage::GetRanges); + AddTabPage("RID_SVXPAGE_SLANT", SvxSlantTabPage::Create, SvxSlantTabPage::GetRanges); +} + + +void SvxTransformTabDialog::PageCreated(const OString& rId, SfxTabPage &rPage) +{ + if (rId == "RID_SVXPAGE_POSITION_SIZE") + { + SvxPositionSizeTabPage& rSvxPos = static_cast<SvxPositionSizeTabPage&>(rPage); + rSvxPos.SetView(pView); + rSvxPos.Construct(); + + if(nAnchorCtrls & SvxAnchorIds::NoResize) + { + rSvxPos.DisableResize(); + } + + if(nAnchorCtrls & SvxAnchorIds::NoProtect) + { + rSvxPos.DisableProtect(); + rSvxPos.UpdateControlStates(); + } + } + else if (rId == "RID_SVXPAGE_SWPOSSIZE") + { + SvxSwPosSizeTabPage& rSwPos = static_cast<SvxSwPosSizeTabPage&>(rPage); + + rSwPos.EnableAnchorTypes(nAnchorCtrls); + rSwPos.SetValidateFramePosLink(aValidateLink); + rSwPos.SetView(pView); + } + else if (rId == "RID_SVXPAGE_ANGLE") + { + SvxAngleTabPage& rSvxAng = static_cast<SvxAngleTabPage&>(rPage); + + rSvxAng.SetView( pView ); + rSvxAng.Construct(); + } + else if (rId == "RID_SVXPAGE_SLANT") + { + SvxSlantTabPage& rSvxSlnt = static_cast<SvxSlantTabPage&>(rPage); + + rSvxSlnt.SetView( pView ); + rSvxSlnt.Construct(); + } +} + +void SvxTransformTabDialog::SetValidateFramePosLink(const Link<SvxSwFrameValidation&,void>& rLink) +{ + aValidateLink = rLink; +} + +/************************************************************************* +|* +|* dialog for changing the positions of the rotation +|* angle and the rotation angle of the graphic objects +|* +\************************************************************************/ +SvxAngleTabPage::SvxAngleTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) + : SvxTabPage(pPage, pController, "cui/ui/rotationtabpage.ui", "Rotation", rInAttrs) + , pView(nullptr) + , eDlgUnit(FieldUnit::NONE) + , m_aCtlRect(this) + , m_xFlPosition(m_xBuilder->weld_widget("FL_POSITION")) + , m_xMtrPosX(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_X", FieldUnit::CM)) + , m_xMtrPosY(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_Y", FieldUnit::CM)) + , m_xCtlRect(new weld::CustomWeld(*m_xBuilder, "CTL_RECT", m_aCtlRect)) + , m_xFlAngle(m_xBuilder->weld_widget("FL_ANGLE")) + , m_xNfAngle(m_xBuilder->weld_metric_spin_button("NF_ANGLE", FieldUnit::DEGREE)) + , m_xCtlAngle(new svx::DialControl) + , m_xCtlAngleWin(new weld::CustomWeld(*m_xBuilder, "CTL_ANGLE", *m_xCtlAngle)) +{ + // calculate PoolUnit + SfxItemPool* pPool = rInAttrs.GetPool(); + DBG_ASSERT( pPool, "no pool (!)" ); + ePoolUnit = pPool->GetMetric(SID_ATTR_TRANSFORM_POS_X); + + m_xCtlAngle->SetLinkedField(m_xNfAngle.get(), 2); +} + +SvxAngleTabPage::~SvxAngleTabPage() +{ +} + +void SvxAngleTabPage::Construct() +{ + DBG_ASSERT(pView, "No valid view (!)"); + eDlgUnit = GetModuleFieldUnit(GetItemSet()); + SetFieldUnit(*m_xMtrPosX, eDlgUnit, true); + SetFieldUnit(*m_xMtrPosY, eDlgUnit, true); + + if (FieldUnit::MILE == eDlgUnit || FieldUnit::KM == eDlgUnit) + { + m_xMtrPosX->set_digits(3); + m_xMtrPosY->set_digits(3); + } + + { // #i75273# + ::tools::Rectangle aTempRect(pView->GetAllMarkedRect()); + pView->GetSdrPageView()->LogicToPagePos(aTempRect); + maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect); + } + + // Take anchor into account (Writer) + const SdrMarkList& rMarkList = pView->GetMarkedObjectList(); + + if(rMarkList.GetMarkCount()) + { + const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj(); + maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y()); + + if(!maAnchor.equalZero()) // -> Writer + { + maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor); + } + } + + // take scale into account + const Fraction aUIScale(pView->GetModel()->GetUIScale()); + TransfrmHelper::ScaleRect(maRange, aUIScale); + + // take UI units into account + sal_uInt16 nDigits(m_xMtrPosX->get_digits()); + TransfrmHelper::ConvertRect(maRange, nDigits, ePoolUnit, eDlgUnit); + + if(!pView->IsRotateAllowed()) + { + m_xFlPosition->set_sensitive(false); + m_xFlAngle->set_sensitive(false); + } +} + +bool SvxAngleTabPage::FillItemSet(SfxItemSet* rSet) +{ + bool bModified = false; + + if (m_xCtlAngle->IsValueModified() || m_xMtrPosX->get_value_changed_from_saved() || m_xMtrPosY->get_value_changed_from_saved()) + { + const double fUIScale(double(pView->GetModel()->GetUIScale())); + const double fTmpX((GetCoreValue(*m_xMtrPosX, ePoolUnit) + maAnchor.getX()) * fUIScale); + const double fTmpY((GetCoreValue(*m_xMtrPosY, ePoolUnit) + maAnchor.getY()) * fUIScale); + + rSet->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ANGLE), m_xCtlAngle->GetRotation())); + rSet->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ROT_X), basegfx::fround(fTmpX))); + rSet->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ROT_Y), basegfx::fround(fTmpY))); + + bModified = true; + } + + return bModified; +} + + +void SvxAngleTabPage::Reset(const SfxItemSet* rAttrs) +{ + const double fUIScale(double(pView->GetModel()->GetUIScale())); + + const SfxPoolItem* pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_ROT_X ); + if(pItem) + { + const double fTmp((static_cast<double>(static_cast<const SfxInt32Item*>(pItem)->GetValue()) - maAnchor.getX()) / fUIScale); + SetMetricValue(*m_xMtrPosX, basegfx::fround(fTmp), ePoolUnit); + } + else + { + m_xMtrPosX->set_text(OUString()); + } + + pItem = GetItem(*rAttrs, SID_ATTR_TRANSFORM_ROT_Y); + if(pItem) + { + const double fTmp((static_cast<double>(static_cast<const SfxInt32Item*>(pItem)->GetValue()) - maAnchor.getY()) / fUIScale); + SetMetricValue(*m_xMtrPosY, basegfx::fround(fTmp), ePoolUnit); + } + else + { + m_xMtrPosY->set_text(OUString()); + } + + pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_ANGLE ); + if(pItem) + { + m_xCtlAngle->SetRotation(static_cast<const SfxInt32Item*>(pItem)->GetValue()); + } + else + { + m_xCtlAngle->SetRotation(0); + } + m_xCtlAngle->SaveValue(); + m_xMtrPosX->save_value(); + m_xMtrPosY->save_value(); +} + +std::unique_ptr<SfxTabPage> SvxAngleTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet) +{ + return std::make_unique<SvxAngleTabPage>(pPage, pController, *rSet); +} + +void SvxAngleTabPage::ActivatePage(const SfxItemSet& rSet) +{ + SfxBoolItem const * bPosProtect = nullptr; + if(SfxItemState::SET == rSet.GetItemState( GetWhich(SID_ATTR_TRANSFORM_PROTECT_POS ) , false, reinterpret_cast<SfxPoolItem const **>(&bPosProtect) )) + { + m_xFlPosition->set_sensitive(!bPosProtect->GetValue()); + m_xFlAngle->set_sensitive(!bPosProtect->GetValue()); + } +} + +DeactivateRC SvxAngleTabPage::DeactivatePage( SfxItemSet* _pSet ) +{ + if(_pSet) + { + FillItemSet(_pSet); + } + + return DeactivateRC::LeavePage; +} + +void SvxAngleTabPage::PointChanged(weld::DrawingArea* pDrawingArea, RectPoint eRP) +{ + if (pDrawingArea != m_aCtlRect.GetDrawingArea()) + return; + + switch(eRP) + { + case RectPoint::LT: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE ); + break; + } + case RectPoint::MT: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE ); + break; + } + case RectPoint::RT: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE ); + break; + } + case RectPoint::LM: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE ); + break; + } + case RectPoint::MM: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE ); + break; + } + case RectPoint::RM: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE ); + break; + } + case RectPoint::LB: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE ); + break; + } + case RectPoint::MB: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE ); + break; + } + case RectPoint::RB: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE ); + break; + } + } +} + +/************************************************************************* +|* +|* dialog for changing slant and corner radius +|* +\************************************************************************/ +SvxSlantTabPage::SvxSlantTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) + : SfxTabPage(pPage, pController, "cui/ui/slantcornertabpage.ui", "SlantAndCornerRadius", &rInAttrs) + , pView(nullptr) + , eDlgUnit(FieldUnit::NONE) + , m_xFlRadius(m_xBuilder->weld_widget("FL_RADIUS")) + , m_xMtrRadius(m_xBuilder->weld_metric_spin_button("MTR_FLD_RADIUS", FieldUnit::CM)) + , m_xFlAngle(m_xBuilder->weld_widget("FL_SLANT")) + , m_xMtrAngle(m_xBuilder->weld_metric_spin_button("MTR_FLD_ANGLE", FieldUnit::DEGREE)) +{ + for (int i = 0; i < 2; ++i) + { + m_aControlGroups[i] = m_xBuilder->weld_widget("controlgroups" + OString::number(i+1)); + m_aControlGroupX[i] = m_xBuilder->weld_widget("controlgroupx" + OString::number(i+1)); + m_aControlX[i] = m_xBuilder->weld_metric_spin_button("controlx" + OString::number(i+1), FieldUnit::CM); + m_aControlGroupY[i] = m_xBuilder->weld_widget("controlgroupy" + OString::number(i+1)); + m_aControlY[i] = m_xBuilder->weld_metric_spin_button("controly" + OString::number(i+1), FieldUnit::CM); + } + + // this page needs ExchangeSupport + SetExchangeSupport(); + + // evaluate PoolUnit + SfxItemPool* pPool = rInAttrs.GetPool(); + assert(pPool && "no pool (!)"); + ePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X ); +} + +SvxSlantTabPage::~SvxSlantTabPage() +{ +} + +void SvxSlantTabPage::Construct() +{ + // get the range + DBG_ASSERT(pView, "no valid view (!)"); + eDlgUnit = GetModuleFieldUnit(GetItemSet()); + SetFieldUnit(*m_xMtrRadius, eDlgUnit, true); + for (int i = 0; i < 2; ++i) + { + SetFieldUnit(*m_aControlX[i], eDlgUnit, true); + SetFieldUnit(*m_aControlY[i], eDlgUnit, true); + } + + { // #i75273# + ::tools::Rectangle aTempRect(pView->GetAllMarkedRect()); + pView->GetSdrPageView()->LogicToPagePos(aTempRect); + } +} + +bool SvxSlantTabPage::FillItemSet(SfxItemSet* rAttrs) +{ + bool bModified = false; + + if (m_xMtrRadius->get_value_changed_from_saved()) + { + Fraction aUIScale = pView->GetModel()->GetUIScale(); + long nTmp = long(GetCoreValue(*m_xMtrRadius, ePoolUnit) * aUIScale); + + rAttrs->Put( makeSdrEckenradiusItem( nTmp ) ); + bModified = true; + } + + if (m_xMtrAngle->get_value_changed_from_saved()) + { + sal_Int32 nValue = static_cast<sal_Int32>(m_xMtrAngle->get_value(FieldUnit::NONE)); + rAttrs->Put( SfxInt32Item( SID_ATTR_TRANSFORM_SHEAR, nValue ) ); + bModified = true; + } + + if( bModified ) + { + // set reference points + ::tools::Rectangle aObjectRect(pView->GetAllMarkedRect()); + pView->GetSdrPageView()->LogicToPagePos(aObjectRect); + Point aPt = aObjectRect.Center(); + + rAttrs->Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X, aPt.X())); + rAttrs->Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y, aPt.Y())); + rAttrs->Put( SfxBoolItem( SID_ATTR_TRANSFORM_SHEAR_VERTICAL, false ) ); + } + + bool bControlPointsChanged = false; + for (int i = 0; i < 2; ++i) + { + bControlPointsChanged |= (m_aControlX[i]->get_value_changed_from_saved() || + m_aControlY[i]->get_value_changed_from_saved()); + } + + if (!bControlPointsChanged) + return bModified; + + bool bSelectionIsSdrObjCustomShape(false); + + while(true) + { + if(nullptr == pView) + { + break; + } + + if(0 == pView->GetMarkedObjectList().GetMarkCount()) + { + break; + } + + SdrObject* pCandidate(pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj()); + + if(nullptr == pCandidate) + { + break; + } + + if(nullptr == dynamic_cast< SdrObjCustomShape* >(pCandidate)) + { + break; + } + + bSelectionIsSdrObjCustomShape = true; + break; + } + + if(bSelectionIsSdrObjCustomShape) + { + SdrObjCustomShape& rSdrObjCustomShape( + static_cast< SdrObjCustomShape& >( + *pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj())); + SdrModel& rModel(rSdrObjCustomShape.getSdrModelFromSdrObject()); + std::unique_ptr<SdrUndoAction> pUndo; + if (rModel.IsUndoEnabled()) + pUndo = rModel.GetSdrUndoFactory().CreateUndoAttrObject(rSdrObjCustomShape); + + if(pUndo) + { + rModel.BegUndo(pUndo->GetComment()); + } + + EnhancedCustomShape2d aShape(rSdrObjCustomShape); + ::tools::Rectangle aLogicRect = aShape.GetLogicRect(); + + for (int i = 0; i < 2; ++i) + { + if (m_aControlX[i]->get_value_changed_from_saved() || m_aControlY[i]->get_value_changed_from_saved()) + { + Point aNewPosition(GetCoreValue(*m_aControlX[i], ePoolUnit), + GetCoreValue(*m_aControlY[i], ePoolUnit)); + aNewPosition.Move(aLogicRect.Left(), aLogicRect.Top()); + + css::awt::Point aPosition; + aPosition.X = aNewPosition.X(); + aPosition.Y = aNewPosition.Y(); + + aShape.SetHandleControllerPosition(i, aPosition); + } + } + + rSdrObjCustomShape.SetChanged(); + rSdrObjCustomShape.BroadcastObjectChange(); + bModified = true; + + if (pUndo) + { + rModel.AddUndo(std::move(pUndo)); + rModel.EndUndo(); + } + } + + return bModified; +} + +void SvxSlantTabPage::Reset(const SfxItemSet* rAttrs) +{ + // if the view has selected objects, items with SfxItemState::DEFAULT need to be disabled + const SfxPoolItem* pItem; + + // corner radius + if(!pView->IsEdgeRadiusAllowed()) + { + m_xMtrRadius->set_text(""); + m_xFlRadius->set_sensitive(false); + } + else + { + pItem = GetItem( *rAttrs, SDRATTR_ECKENRADIUS ); + + if( pItem ) + { + const double fUIScale(double(pView->GetModel()->GetUIScale())); + const double fTmp(static_cast<double>(static_cast<const SdrMetricItem*>(pItem)->GetValue()) / fUIScale); + SetMetricValue(*m_xMtrRadius, basegfx::fround(fTmp), ePoolUnit); + } + else + { + m_xMtrRadius->set_text(""); + } + } + + m_xMtrRadius->save_value(); + + // slant: angle + if( !pView->IsShearAllowed() ) + { + m_xMtrAngle->set_text( "" ); + m_xFlAngle->set_sensitive(false); + } + else + { + pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_SHEAR ); + + if( pItem ) + { + m_xMtrAngle->set_value(static_cast<const SfxInt32Item*>(pItem)->GetValue(), FieldUnit::NONE); + } + else + { + m_xMtrAngle->set_text(""); + } + } + + m_xMtrAngle->save_value(); + + bool bSelectionIsSdrObjCustomShape(false); + + while(true) + { + if(1 != pView->GetMarkedObjectList().GetMarkCount()) + { + break; + } + + SdrObject* pCandidate(pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj()); + + if(nullptr == pCandidate) + { + break; + } + + if(nullptr == dynamic_cast< SdrObjCustomShape* >(pCandidate)) + { + break; + } + + bSelectionIsSdrObjCustomShape = true; + break; + } + + if(bSelectionIsSdrObjCustomShape) + { + SdrObjCustomShape& rSdrObjCustomShape( + static_cast< SdrObjCustomShape& >( + *pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj())); + + //save geometry + SdrCustomShapeGeometryItem aInitialGeometry(rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY)); + EnhancedCustomShape2d aShape(rSdrObjCustomShape); + + for (int i = 0; i < 2; ++i) + { + Point aInitialPosition; + if (!aShape.GetHandlePosition(i, aInitialPosition)) + break; + m_aControlGroups[i]->set_sensitive(true); + css::awt::Point aPosition; + + aPosition.X = SAL_MAX_INT32/2; + aPosition.Y = SAL_MAX_INT32/2; + aShape.SetHandleControllerPosition(i, aPosition); + Point aMaxPosition; + aShape.GetHandlePosition(i, aMaxPosition); + + aPosition.X = SAL_MIN_INT32/2; + aPosition.Y = SAL_MIN_INT32/2; + aShape.SetHandleControllerPosition(i, aPosition); + Point aMinPosition; + aShape.GetHandlePosition(i, aMinPosition); + + ::tools::Rectangle aLogicRect = aShape.GetLogicRect(); + aInitialPosition.Move(-aLogicRect.Left(), -aLogicRect.Top()); + aMaxPosition.Move(-aLogicRect.Left(), -aLogicRect.Top()); + aMinPosition.Move(-aLogicRect.Left(), -aLogicRect.Top()); + + SetMetricValue(*m_aControlX[i], aInitialPosition.X(), ePoolUnit); + SetMetricValue(*m_aControlY[i], aInitialPosition.Y(), ePoolUnit); + + if (aMaxPosition.X() == aMinPosition.X()) + m_aControlGroupX[i]->set_sensitive(false); + else + m_aControlX[i]->set_range(aMinPosition.X(), aMaxPosition.X(), FieldUnit::MM); + if (aMaxPosition.Y() == aMinPosition.Y()) + m_aControlGroupY[i]->set_sensitive(false); + else + m_aControlY[i]->set_range(aMinPosition.Y(), aMaxPosition.Y(), FieldUnit::MM); + } + + //restore geometry + rSdrObjCustomShape.SetMergedItem(aInitialGeometry); + } + + for (int i = 0; i < 2; ++i) + { + m_aControlX[i]->save_value(); + m_aControlY[i]->save_value(); + } +} + +std::unique_ptr<SfxTabPage> SvxSlantTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs) +{ + return std::make_unique<SvxSlantTabPage>(pPage, pController, *rOutAttrs); +} + +void SvxSlantTabPage::ActivatePage( const SfxItemSet& rSet ) +{ + SfxBoolItem const * bPosProtect = nullptr; + if(SfxItemState::SET == rSet.GetItemState( GetWhich(SID_ATTR_TRANSFORM_PROTECT_POS ) , false, reinterpret_cast<SfxPoolItem const **>(&bPosProtect) )) + { + m_xFlAngle->set_sensitive(!bPosProtect->GetValue()); + } + SfxBoolItem const * bSizeProtect = nullptr; + if(SfxItemState::SET == rSet.GetItemState( GetWhich(SID_ATTR_TRANSFORM_PROTECT_SIZE ) , false, reinterpret_cast<SfxPoolItem const **>(&bSizeProtect) )) + { + m_xFlAngle->set_sensitive(!bSizeProtect->GetValue()); + } + +} + +DeactivateRC SvxSlantTabPage::DeactivatePage( SfxItemSet* _pSet ) +{ + if(_pSet) + { + FillItemSet(_pSet); + } + + return DeactivateRC::LeavePage; +} + + +/************************************************************************* +|* +|* Dialog for changing position and size of graphic objects +|* +\************************************************************************/ +SvxPositionSizeTabPage::SvxPositionSizeTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) + : SvxTabPage(pPage, pController, "cui/ui/possizetabpage.ui", "PositionAndSize", rInAttrs) + , mrOutAttrs(rInAttrs) + , mpView(nullptr) + , meDlgUnit(FieldUnit::NONE) + , mnProtectSizeState(TRISTATE_FALSE) + , mbPageDisabled(false) + , mbProtectDisabled(false) + , mbSizeDisabled(false) + , mbAdjustDisabled(true) + , mbIgnoreAutoGrowWidth(true) + , mbIgnoreAutoGrowHeight(true) + , mfOldWidth(0.0) + , mfOldHeight(0.0) + , m_aCtlPos(this) + , m_aCtlSize(this) + , m_xFlPosition(m_xBuilder->weld_widget("FL_POSITION")) + , m_xMtrPosX(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_X", FieldUnit::CM)) + , m_xMtrPosY(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_Y", FieldUnit::CM)) + , m_xCtlPos(new weld::CustomWeld(*m_xBuilder, "CTL_POSRECT", m_aCtlPos)) + , m_xFlSize(m_xBuilder->weld_widget("FL_SIZE")) + , m_xFtWidth(m_xBuilder->weld_label("FT_WIDTH")) + , m_xMtrWidth(m_xBuilder->weld_metric_spin_button("MTR_FLD_WIDTH", FieldUnit::CM)) + , m_xFtHeight(m_xBuilder->weld_label("FT_HEIGHT")) + , m_xMtrHeight(m_xBuilder->weld_metric_spin_button("MTR_FLD_HEIGHT", FieldUnit::CM)) + , m_xCbxScale(m_xBuilder->weld_check_button("CBX_SCALE")) + , m_xCtlSize(new weld::CustomWeld(*m_xBuilder, "CTL_SIZERECT", m_aCtlSize)) + , m_xFlProtect(m_xBuilder->weld_widget("FL_PROTECT")) + , m_xTsbPosProtect(m_xBuilder->weld_check_button("TSB_POSPROTECT")) + , m_xTsbSizeProtect(m_xBuilder->weld_check_button("TSB_SIZEPROTECT")) + , m_xFlAdjust(m_xBuilder->weld_widget("FL_ADJUST")) + , m_xTsbAutoGrowWidth(m_xBuilder->weld_check_button("TSB_AUTOGROW_WIDTH")) + , m_xTsbAutoGrowHeight(m_xBuilder->weld_check_button("TSB_AUTOGROW_HEIGHT")) +{ + // this page needs ExchangeSupport + SetExchangeSupport(); + + // evaluate PoolUnit + SfxItemPool* pPool = mrOutAttrs.GetPool(); + DBG_ASSERT( pPool, "no pool (!)" ); + mePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X ); + + m_aCtlPos.SetActualRP(RectPoint::LT); + m_aCtlSize.SetActualRP(RectPoint::LT); + meRP = RectPoint::LT; // see above + + m_xMtrWidth->connect_value_changed( LINK( this, SvxPositionSizeTabPage, ChangeWidthHdl ) ); + m_xMtrHeight->connect_value_changed( LINK( this, SvxPositionSizeTabPage, ChangeHeightHdl ) ); + m_xCbxScale->connect_toggled( LINK( this, SvxPositionSizeTabPage, ClickAutoHdl ) ); + + m_xFlAdjust->set_sensitive(false); + + // #i2379# disable controls when protected + m_xTsbPosProtect->connect_toggled( LINK( this, SvxPositionSizeTabPage, ChangePosProtectHdl ) ); + m_xTsbSizeProtect->connect_toggled( LINK( this, SvxPositionSizeTabPage, ChangeSizeProtectHdl ) ); +} + +SvxPositionSizeTabPage::~SvxPositionSizeTabPage() +{ +} + +void SvxPositionSizeTabPage::Construct() +{ + // get range and work area + DBG_ASSERT( mpView, "no valid view (!)" ); + meDlgUnit = GetModuleFieldUnit( GetItemSet() ); + SetFieldUnit( *m_xMtrPosX, meDlgUnit, true ); + SetFieldUnit( *m_xMtrPosY, meDlgUnit, true ); + SetFieldUnit( *m_xMtrWidth, meDlgUnit, true ); + SetFieldUnit( *m_xMtrHeight, meDlgUnit, true ); + + if(FieldUnit::MILE == meDlgUnit || FieldUnit::KM == meDlgUnit) + { + m_xMtrPosX->set_digits( 3 ); + m_xMtrPosY->set_digits( 3 ); + m_xMtrWidth->set_digits( 3 ); + m_xMtrHeight->set_digits( 3 ); + } + + { // #i75273# + ::tools::Rectangle aTempRect(mpView->GetAllMarkedRect()); + mpView->GetSdrPageView()->LogicToPagePos(aTempRect); + maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect); + } + + { // #i75273# + ::tools::Rectangle aTempRect(mpView->GetWorkArea()); + mpView->GetSdrPageView()->LogicToPagePos(aTempRect); + maWorkRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect); + } + + // take anchor into account (Writer) + const SdrMarkList& rMarkList = mpView->GetMarkedObjectList(); + + if(rMarkList.GetMarkCount()) + { + const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj(); + maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y()); + + if(!maAnchor.equalZero()) // -> Writer + { + for(size_t i = 1; i < rMarkList.GetMarkCount(); ++i) + { + pObj = rMarkList.GetMark(i)->GetMarkedSdrObj(); + + if(maAnchor != basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y())) + { + // different anchor positions + m_xMtrPosX->set_text(""); + m_xMtrPosY->set_text(""); + mbPageDisabled = true; + return; + } + } + + // translate ranges about anchor + maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor); + maWorkRange = basegfx::B2DRange(maWorkRange.getMinimum() - maAnchor, maWorkRange.getMaximum() - maAnchor); + } + } + + // this should happen via SID_ATTR_TRANSFORM_AUTOSIZE + if(1 == rMarkList.GetMarkCount()) + { + const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj(); + const SdrObjKind eKind(static_cast<SdrObjKind>(pObj->GetObjIdentifier())); + + if((pObj->GetObjInventor() == SdrInventor::Default) && + (OBJ_TEXT == eKind || OBJ_TITLETEXT == eKind || OBJ_OUTLINETEXT == eKind) && + pObj->HasText()) + { + mbAdjustDisabled = false; + + m_xFlAdjust->set_sensitive(true); + + m_xTsbAutoGrowWidth->connect_toggled( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) ); + m_xTsbAutoGrowHeight->connect_toggled( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) ); + + // is used as flag to evaluate if its selectable + mbIgnoreAutoGrowWidth = false; + mbIgnoreAutoGrowHeight = false; + } + } + + // take scale into account + const Fraction aUIScale(mpView->GetModel()->GetUIScale()); + TransfrmHelper::ScaleRect( maWorkRange, aUIScale ); + TransfrmHelper::ScaleRect( maRange, aUIScale ); + + // take UI units into account + const sal_uInt16 nDigits(m_xMtrPosX->get_digits()); + TransfrmHelper::ConvertRect( maWorkRange, nDigits, mePoolUnit, meDlgUnit ); + TransfrmHelper::ConvertRect( maRange, nDigits, mePoolUnit, meDlgUnit ); + + SetMinMaxPosition(); +} + + +bool SvxPositionSizeTabPage::FillItemSet( SfxItemSet* rOutAttrs ) +{ + bool bModified(false); + + if ( m_xMtrWidth->has_focus() ) + { + ChangeWidthHdl( *m_xMtrWidth ); + } + + if ( m_xMtrHeight->has_focus() ) + { + ChangeHeightHdl( *m_xMtrHeight ); + } + + if( !mbPageDisabled ) + { + if (m_xMtrPosX->get_value_changed_from_saved() || m_xMtrPosY->get_value_changed_from_saved()) + { + const double fUIScale(double(mpView->GetModel()->GetUIScale())); + double fX((GetCoreValue( *m_xMtrPosX, mePoolUnit ) + maAnchor.getX()) * fUIScale); + double fY((GetCoreValue( *m_xMtrPosY, mePoolUnit ) + maAnchor.getY()) * fUIScale); + + { // #i75273# + ::tools::Rectangle aTempRect(mpView->GetAllMarkedRect()); + mpView->GetSdrPageView()->LogicToPagePos(aTempRect); + maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect); + } + + // #101581# GetTopLeftPosition(...) needs coordinates after UI scaling, in real PagePositions + GetTopLeftPosition(fX, fY, maRange); + + rOutAttrs->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_POS_X), basegfx::fround(fX))); + rOutAttrs->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_POS_Y), basegfx::fround(fY))); + + bModified = true; + } + + if (m_xTsbPosProtect->get_state_changed_from_saved()) + { + if( m_xTsbPosProtect->get_inconsistent() ) + { + rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_POS ); + } + else + { + rOutAttrs->Put( + SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_POS ), + m_xTsbPosProtect->get_active() ) ); + } + + bModified = true; + } + } + + if (m_xMtrWidth->get_value_changed_from_saved() || m_xMtrHeight->get_value_changed_from_saved()) + { + Fraction aUIScale = mpView->GetModel()->GetUIScale(); + + // get Width + double nWidth = static_cast<double>(m_xMtrWidth->get_value(FieldUnit::MM_100TH)); + long lWidth = long(nWidth * static_cast<double>(aUIScale)); + lWidth = OutputDevice::LogicToLogic( lWidth, MapUnit::Map100thMM, mePoolUnit ); + lWidth = static_cast<long>(m_xMtrWidth->denormalize( lWidth )); + + // get Height + double nHeight = static_cast<double>(m_xMtrHeight->get_value(FieldUnit::MM_100TH)); + long lHeight = long(nHeight * static_cast<double>(aUIScale)); + lHeight = OutputDevice::LogicToLogic( lHeight, MapUnit::Map100thMM, mePoolUnit ); + lHeight = static_cast<long>(m_xMtrHeight->denormalize( lHeight )); + + // put Width & Height to itemset + rOutAttrs->Put( SfxUInt32Item( GetWhich( SID_ATTR_TRANSFORM_WIDTH ), static_cast<sal_uInt32>(lWidth) ) ); + rOutAttrs->Put( SfxUInt32Item( GetWhich( SID_ATTR_TRANSFORM_HEIGHT ), static_cast<sal_uInt32>(lHeight) ) ); + rOutAttrs->Put( SfxUInt16Item( GetWhich( SID_ATTR_TRANSFORM_SIZE_POINT ), sal::static_int_cast< sal_uInt16 >( meRP ) ) ); + bModified = true; + } + + if (m_xTsbSizeProtect->get_state_changed_from_saved()) + { + if ( m_xTsbSizeProtect->get_inconsistent() ) + rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_SIZE ); + else + rOutAttrs->Put( + SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_SIZE ), + m_xTsbSizeProtect->get_active() ) ); + bModified = true; + } + + if (m_xTsbAutoGrowWidth->get_state_changed_from_saved()) + { + if (!mbIgnoreAutoGrowWidth) + { + if( m_xTsbAutoGrowWidth->get_inconsistent() ) + rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_AUTOWIDTH ); + else + rOutAttrs->Put( + SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_AUTOWIDTH ), + m_xTsbAutoGrowWidth->get_active() ) ); + } + bModified = true; + } + + if (m_xTsbAutoGrowHeight->get_state_changed_from_saved()) + { + if (!mbIgnoreAutoGrowHeight) + { + if (m_xTsbAutoGrowHeight->get_inconsistent()) + { + rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_AUTOHEIGHT ); + } + else + { + rOutAttrs->Put( + SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_AUTOHEIGHT ), + m_xTsbAutoGrowHeight->get_active() ) ); + } + } + bModified = true; + } + + return bModified; +} + +void SvxPositionSizeTabPage::Reset( const SfxItemSet* ) +{ + const SfxPoolItem* pItem; + const double fUIScale(double(mpView->GetModel()->GetUIScale())); + + if ( !mbPageDisabled ) + { + pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_X ); + if ( pItem ) + { + const double fTmp((static_cast<const SfxInt32Item*>(pItem)->GetValue() - maAnchor.getX()) / fUIScale); + SetMetricValue(*m_xMtrPosX, basegfx::fround(fTmp), mePoolUnit); + } + + pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_Y ); + if ( pItem ) + { + const double fTmp((static_cast<const SfxInt32Item*>(pItem)->GetValue() - maAnchor.getY()) / fUIScale); + SetMetricValue(*m_xMtrPosY, basegfx::fround(fTmp), mePoolUnit); + } + + pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_POS ); + if ( pItem ) + { + bool bProtected = static_cast<const SfxBoolItem*>( pItem )->GetValue(); + m_xTsbPosProtect->set_active(bProtected); + } + else + { + m_xTsbPosProtect->set_inconsistent(true); + } + + m_xTsbPosProtect->save_state(); + m_aCtlPos.Reset(); + + // #i2379# Disable controls for protected objects + ChangePosProtectHdl(*m_xTsbPosProtect); + } + + { // #i75273# set width + pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_WIDTH ); + mfOldWidth = std::max( pItem ? static_cast<double>(static_cast<const SfxUInt32Item*>(pItem)->GetValue()) : 0.0, 1.0 ); + double fTmpWidth((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldWidth), mePoolUnit, MapUnit::Map100thMM)) / fUIScale); + if (m_xMtrWidth->get_digits()) + fTmpWidth *= pow(10.0, m_xMtrWidth->get_digits()); + m_xMtrWidth->set_value(static_cast<int>(fTmpWidth), FieldUnit::MM_100TH); + } + + { // #i75273# set height + pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_HEIGHT ); + mfOldHeight = std::max( pItem ? static_cast<double>(static_cast<const SfxUInt32Item*>(pItem)->GetValue()) : 0.0, 1.0 ); + double fTmpHeight((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldHeight), mePoolUnit, MapUnit::Map100thMM)) / fUIScale); + if (m_xMtrHeight->get_digits()) + fTmpHeight *= pow(10.0, m_xMtrHeight->get_digits()); + m_xMtrHeight->set_value(static_cast<int>(fTmpHeight), FieldUnit::MM_100TH); + } + + pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_SIZE ); + if ( pItem ) + { + m_xTsbSizeProtect->set_active(static_cast<const SfxBoolItem*>(pItem)->GetValue()); + } + else + m_xTsbSizeProtect->set_inconsistent(true); + + pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOWIDTH ); + if ( pItem ) + { + m_xTsbAutoGrowWidth->set_active(static_cast<const SfxBoolItem*>( pItem )->GetValue()); + } + else + m_xTsbAutoGrowWidth->set_inconsistent(true); + + pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOHEIGHT ); + if ( pItem ) + { + m_xTsbAutoGrowHeight->set_active(static_cast<const SfxBoolItem*>( pItem )->GetValue()); + } + else + m_xTsbAutoGrowHeight->set_inconsistent(true); + + // Is matching set? + OUString aStr = GetUserData(); + m_xCbxScale->set_active(aStr.toInt32() != 0); + + m_xMtrPosX->save_value(); + m_xMtrPosY->save_value(); + m_xMtrWidth->save_value(); + m_xMtrHeight->save_value(); + + m_xTsbSizeProtect->save_state(); + m_xTsbAutoGrowWidth->save_state(); + m_xTsbAutoGrowHeight->save_state(); + ClickSizeProtectHdl(*m_xTsbAutoGrowHeight); + + // #i2379# Disable controls for protected objects + ChangeSizeProtectHdl(*m_xTsbSizeProtect); +} + +std::unique_ptr<SfxTabPage> SvxPositionSizeTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs) +{ + return std::make_unique<SvxPositionSizeTabPage>(pPage, pController, *rOutAttrs); +} + +void SvxPositionSizeTabPage::ActivatePage( const SfxItemSet& rSet ) +{ + SfxRectangleItem const * pRectItem = nullptr; + + if( SfxItemState::SET == rSet.GetItemState( GetWhich( SID_ATTR_TRANSFORM_INTERN ) , false, reinterpret_cast<SfxPoolItem const **>(&pRectItem) ) ) + { + { // #i75273# + const ::tools::Rectangle aTempRect(pRectItem->GetValue()); + maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect); + } + + SetMinMaxPosition(); + } +} + + +DeactivateRC SvxPositionSizeTabPage::DeactivatePage( SfxItemSet* _pSet ) +{ + if( _pSet ) + { + double fX(static_cast<double>(m_xMtrPosX->get_value(FieldUnit::NONE))); + double fY(static_cast<double>(m_xMtrPosY->get_value(FieldUnit::NONE))); + + GetTopLeftPosition(fX, fY, maRange); + const ::tools::Rectangle aOutRectangle( + basegfx::fround(fX), basegfx::fround(fY), + basegfx::fround(fX + maRange.getWidth()), basegfx::fround(fY + maRange.getHeight())); + _pSet->Put(SfxRectangleItem(SID_ATTR_TRANSFORM_INTERN, aOutRectangle)); + _pSet->Put(SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_POS ), + m_xTsbPosProtect->get_state() == TRISTATE_TRUE )); + _pSet->Put(SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_SIZE ), + m_xTsbSizeProtect->get_state() == TRISTATE_TRUE )); + FillItemSet(_pSet); + } + + return DeactivateRC::LeavePage; +} + + +IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangePosProtectHdl, weld::ToggleButton&, void) +{ + // #106572# Remember user's last choice + m_xTsbSizeProtect->set_state(m_xTsbPosProtect->get_state() == TRISTATE_TRUE ? TRISTATE_TRUE : mnProtectSizeState); + UpdateControlStates(); +} + + +void SvxPositionSizeTabPage::UpdateControlStates() +{ + const bool bPosProtect = m_xTsbPosProtect->get_state() == TRISTATE_TRUE; + const bool bSizeProtect = m_xTsbSizeProtect->get_state() == TRISTATE_TRUE; + const bool bHeightChecked = !mbIgnoreAutoGrowHeight && (m_xTsbAutoGrowHeight->get_active()); + const bool bWidthChecked = !mbIgnoreAutoGrowWidth && (m_xTsbAutoGrowWidth->get_active()); + + m_xFlPosition->set_sensitive(!bPosProtect && !mbPageDisabled); + + m_xTsbPosProtect->set_sensitive( !mbProtectDisabled && !mbPageDisabled ); + + m_xFlSize->set_sensitive( !mbSizeDisabled && !bSizeProtect ); + + m_xFtWidth->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bWidthChecked ); + m_xMtrWidth->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bWidthChecked ); + + m_xFtHeight->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked ); + m_xMtrHeight->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked ); + + m_xCbxScale->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked && !bWidthChecked ); + m_xCtlSize->set_sensitive( !mbSizeDisabled && !bSizeProtect && (!bHeightChecked || !bWidthChecked) ); + + m_xFlProtect->set_sensitive( !mbProtectDisabled ); + m_xTsbSizeProtect->set_sensitive( !mbProtectDisabled && !bPosProtect ); + + m_xFlAdjust->set_sensitive( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled ); + + m_aCtlSize.Invalidate(); + m_aCtlPos.Invalidate(); +} + +IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeSizeProtectHdl, weld::ToggleButton&, void) +{ + if (m_xTsbSizeProtect->get_sensitive()) + { + // #106572# Remember user's last choice + + // Note: this works only as long as the dialog is open. When + // the user closes the dialog, there is no way to remember + // whether size was enabled or disabled before pos protect was + // clicked. Thus, if pos protect is selected, the dialog is + // closed and reopened again, unchecking pos protect will + // always uncheck size protect, too. That's life. + mnProtectSizeState = m_xTsbSizeProtect->get_state(); + } + + UpdateControlStates(); +} + +void SvxPositionSizeTabPage::SetMinMaxPosition() +{ + // position + double fLeft(maWorkRange.getMinX()); + double fTop(maWorkRange.getMinY()); + double fRight(maWorkRange.getMaxX()); + double fBottom(maWorkRange.getMaxY()); + + switch (m_aCtlPos.GetActualRP()) + { + case RectPoint::LT: + { + fRight -= maRange.getWidth(); + fBottom -= maRange.getHeight(); + break; + } + case RectPoint::MT: + { + fLeft += maRange.getWidth() / 2.0; + fRight -= maRange.getWidth() / 2.0; + fBottom -= maRange.getHeight(); + break; + } + case RectPoint::RT: + { + fLeft += maRange.getWidth(); + fBottom -= maRange.getHeight(); + break; + } + case RectPoint::LM: + { + fRight -= maRange.getWidth(); + fTop += maRange.getHeight() / 2.0; + fBottom -= maRange.getHeight() / 2.0; + break; + } + case RectPoint::MM: + { + fLeft += maRange.getWidth() / 2.0; + fRight -= maRange.getWidth() / 2.0; + fTop += maRange.getHeight() / 2.0; + fBottom -= maRange.getHeight() / 2.0; + break; + } + case RectPoint::RM: + { + fLeft += maRange.getWidth(); + fTop += maRange.getHeight() / 2.0; + fBottom -= maRange.getHeight() / 2.0; + break; + } + case RectPoint::LB: + { + fRight -= maRange.getWidth(); + fTop += maRange.getHeight(); + break; + } + case RectPoint::MB: + { + fLeft += maRange.getWidth() / 2.0; + fRight -= maRange.getWidth() / 2.0; + fTop += maRange.getHeight(); + break; + } + case RectPoint::RB: + { + fLeft += maRange.getWidth(); + fTop += maRange.getHeight(); + break; + } + } + + const double fMaxLong(static_cast<double>(vcl::ConvertValue( LONG_MAX, 0, MapUnit::Map100thMM, meDlgUnit ) - 1)); + fLeft = std::clamp(fLeft, -fMaxLong, fMaxLong); + fRight = std::clamp(fRight, -fMaxLong, fMaxLong); + fTop = std::clamp(fTop, - fMaxLong, fMaxLong); + fBottom = std::clamp(fBottom, -fMaxLong, fMaxLong); + + // #i75273# normalizing when setting the min/max values was wrong, removed + m_xMtrPosX->set_range(basegfx::fround64(fLeft), basegfx::fround64(fRight), FieldUnit::NONE); + m_xMtrPosY->set_range(basegfx::fround64(fTop), basegfx::fround64(fBottom), FieldUnit::NONE); + + // size + fLeft = maWorkRange.getMinX(); + fTop = maWorkRange.getMinY(); + fRight = maWorkRange.getMaxX(); + fBottom = maWorkRange.getMaxY(); + double fNewX(0); + double fNewY(0); + + switch (m_aCtlSize.GetActualRP()) + { + case RectPoint::LT: + { + fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft ); + fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop ); + break; + } + case RectPoint::MT: + { + fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0; + fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop ); + break; + } + case RectPoint::RT: + { + fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() ); + fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop ); + break; + } + case RectPoint::LM: + { + fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft ); + fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0; + break; + } + case RectPoint::MM: + { + const double f1(maRange.getCenter().getX() - fLeft); + const double f2(fRight - maRange.getCenter().getX()); + const double f3(std::min(f1, f2)); + const double f4(maRange.getCenter().getY() - fTop); + const double f5(fBottom - maRange.getCenter().getY()); + const double f6(std::min(f4, f5)); + + fNewX = f3 * 2.0; + fNewY = f6 * 3.0; + + break; + } + case RectPoint::RM: + { + fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() ); + fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0; + break; + } + case RectPoint::LB: + { + fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft ); + fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() ); + break; + } + case RectPoint::MB: + { + fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0; + fNewY = maWorkRange.getHeight() - ( maRange.getMaxY() - fBottom ); + break; + } + case RectPoint::RB: + { + fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() ); + fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() ); + break; + } + } + + // #i75273# normalizing when setting the min/max values was wrong, removed + m_xMtrWidth->set_max(basegfx::fround64(fNewX), FieldUnit::NONE); + m_xMtrHeight->set_max(basegfx::fround64(fNewY), FieldUnit::NONE); +} + +void SvxPositionSizeTabPage::GetTopLeftPosition(double& rfX, double& rfY, const basegfx::B2DRange& rRange) +{ + switch (m_aCtlPos.GetActualRP()) + { + case RectPoint::LT: + { + break; + } + case RectPoint::MT: + { + rfX -= rRange.getCenter().getX() - rRange.getMinX(); + break; + } + case RectPoint::RT: + { + rfX -= rRange.getWidth(); + break; + } + case RectPoint::LM: + { + rfY -= rRange.getCenter().getY() - rRange.getMinY(); + break; + } + case RectPoint::MM: + { + rfX -= rRange.getCenter().getX() - rRange.getMinX(); + rfY -= rRange.getCenter().getY() - rRange.getMinY(); + break; + } + case RectPoint::RM: + { + rfX -= rRange.getWidth(); + rfY -= rRange.getCenter().getY() - rRange.getMinY(); + break; + } + case RectPoint::LB: + { + rfY -= rRange.getHeight(); + break; + } + case RectPoint::MB: + { + rfX -= rRange.getCenter().getX() - rRange.getMinX(); + rfY -= rRange.getHeight(); + break; + } + case RectPoint::RB: + { + rfX -= rRange.getWidth(); + rfY -= rRange.getHeight(); + break; + } + } +} + +void SvxPositionSizeTabPage::PointChanged(weld::DrawingArea* pDrawingArea, RectPoint eRP) +{ + if (pDrawingArea == m_aCtlPos.GetDrawingArea()) + { + SetMinMaxPosition(); + switch( eRP ) + { + case RectPoint::LT: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE ); + break; + } + case RectPoint::MT: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE ); + break; + } + case RectPoint::RT: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE ); + break; + } + case RectPoint::LM: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE ); + break; + } + case RectPoint::MM: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE ); + break; + } + case RectPoint::RM: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE ); + break; + } + case RectPoint::LB: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE ); + break; + } + case RectPoint::MB: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE ); + break; + } + case RectPoint::RB: + { + m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE ); + m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE ); + break; + } + } + } + else + { + meRP = eRP; + SetMinMaxPosition(); + } +} + +void SvxPositionSizeTabPage::DisableResize() +{ + mbSizeDisabled = true; +} + + +void SvxPositionSizeTabPage::DisableProtect() +{ + mbProtectDisabled = true; +} + + +IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeWidthHdl, weld::MetricSpinButton&, void) +{ + if( !(m_xCbxScale->get_active() && m_xCbxScale->get_sensitive()) ) + return; + + sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(m_xMtrWidth->get_value(FieldUnit::NONE))) / mfOldWidth)); + int nMin, nMax; + m_xMtrHeight->get_range(nMin, nMax, FieldUnit::NONE); + + if (nHeight <= nMax) + { + m_xMtrHeight->set_value(nHeight, FieldUnit::NONE); + } + else + { + nHeight = nMax; + m_xMtrHeight->set_value(nHeight, FieldUnit::NONE); + + const sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(nHeight)) / mfOldHeight)); + m_xMtrWidth->set_value(nWidth, FieldUnit::NONE); + } +} + +IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeHeightHdl, weld::MetricSpinButton&, void) +{ + if( !(m_xCbxScale->get_active() && m_xCbxScale->get_sensitive()) ) + return; + + sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(m_xMtrHeight->get_value(FieldUnit::NONE))) / mfOldHeight)); + int nMin, nMax; + m_xMtrWidth->get_range(nMin, nMax, FieldUnit::NONE); + + if (nWidth <= nMax) + { + m_xMtrWidth->set_value(nWidth, FieldUnit::NONE); + } + else + { + nWidth = nMax; + m_xMtrWidth->set_value(nWidth, FieldUnit::NONE); + + const sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(nWidth)) / mfOldWidth)); + m_xMtrHeight->set_value(nHeight, FieldUnit::NONE); + } +} + +IMPL_LINK_NOARG(SvxPositionSizeTabPage, ClickSizeProtectHdl, weld::ToggleButton&, void) +{ + UpdateControlStates(); +} + +IMPL_LINK_NOARG(SvxPositionSizeTabPage, ClickAutoHdl, weld::ToggleButton&, void) +{ + if (m_xCbxScale->get_active()) + { + mfOldWidth = std::max( static_cast<double>(GetCoreValue( *m_xMtrWidth, mePoolUnit )), 1.0 ); + mfOldHeight = std::max( static_cast<double>(GetCoreValue( *m_xMtrHeight, mePoolUnit )), 1.0 ); + } +} + +void SvxPositionSizeTabPage::FillUserData() +{ + // matching is saved in the Ini-file + OUString aStr = m_xCbxScale->get_active() ? OUString("1") : OUString("0"); + SetUserData( aStr ); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |