diff options
Diffstat (limited to 'offapi/com/sun/star/drawing/EnhancedCustomShapeExtrusion.idl')
| -rw-r--r-- | offapi/com/sun/star/drawing/EnhancedCustomShapeExtrusion.idl | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/offapi/com/sun/star/drawing/EnhancedCustomShapeExtrusion.idl b/offapi/com/sun/star/drawing/EnhancedCustomShapeExtrusion.idl new file mode 100644 index 000000000..bfe99f402 --- /dev/null +++ b/offapi/com/sun/star/drawing/EnhancedCustomShapeExtrusion.idl @@ -0,0 +1,150 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ +#ifndef __com_sun_star_drawing_EnhancedCustomShapeExtrusion_idl__ +#define __com_sun_star_drawing_EnhancedCustomShapeExtrusion_idl__ + +#include <com/sun/star/awt/Size.idl> +#include <com/sun/star/awt/Point.idl> +#include <com/sun/star/beans/PropertyValue.idl> +#include <com/sun/star/drawing/Position3D.idl> +#include <com/sun/star/drawing/Direction3D.idl> +#include <com/sun/star/drawing/ProjectionMode.idl> +#include <com/sun/star/drawing/ShadeMode.idl> +#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.idl> + + +module com { module sun { module star { module drawing { + +/** + This service may be represented by a ::com::sun::star::beans::PropertyValue []. +*/ + +service EnhancedCustomShapeExtrusion +{ + /** This property specifies if extrusion is displayed. The default for this property + is "false" + */ + [optional, property] boolean Extrusion; + + /** This attribute specifies the brightness of a scene in percent. + */ + [optional, property] double Brightness; + + /** The first value of EnhancedCustomShapeParameterPair specifies the depth of the + extrusion in 1/100 mm. The second value (0.0 to 1.0) specifies the fraction of + the extrusion that lies before the shape, a value of 0 is default. + */ + [optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Depth; + + /** This attribute specifies the amount of diffusion reflected by the shape + in percent + */ + [optional, property] double Diffusion; + + /** Specifies the number of line segments that should be used to display curved surfaces. + The higher the number the more line segments are used. + */ + [optional, property] long NumberOfLineSegments; + + /** Specifies if the front face of the extrusion responds to lightning changes. + */ + [optional, property] boolean LightFace; + + /** Specifies if the primary light is harsh. + */ + [optional, property] boolean FirstLightHarsh; + + /** Specifies if the secondary light is harsh. + */ + [optional, property] boolean SecondLightHarsh; + + /** Specifies the intensity for the first light in percent. + */ + [optional, property] double FirstLightLevel; + + /** Specifies the intensity for the second light in percent. + */ + [optional, property] double SecondLightLevel; + + /** Specifies the direction of the first light. + */ + [optional, property] ::com::sun::star::drawing::Direction3D FirstLightDirection; + + /** Specifies the direction of the second light. + */ + [optional, property] ::com::sun::star::drawing::Direction3D SecondLightDirection; + + /** Specifies if the surface of the extrusion object looks like metal. + */ + [optional, property] boolean Metal; + + /** This property defines the shade mode. + */ + [optional, property] ::com::sun::star::drawing::ShadeMode ShadeMode; + + /** This attributes specifies the rotation angle about the x-axis in grad. + The order of rotation is: z-axis, y-axis and then x-axis. The z-axis is + specified by the draw:rotate-angle. + */ + [optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair RotateAngle; + + /** This attribute specifies the position of the rotate center + in terms of shape size fractions, if the property is omitted, then + the geometrical center of the shape is used (this is the default). + */ + [optional, property] ::com::sun::star::drawing::Direction3D RotationCenter; + + /** The draw:extrusion-shininess specifies the shininess of a mirror in percent. + */ + [optional, property] double Shininess; + + /** The first value of the draw:extrusion-skew attribute specifies the skew amount of + an extrusion in percent. The second parameter specifies the skew-angle. Skew settings + are only applied if the attribute ProjectionMode is ProjectionMode_PARALLEL. + */ + [optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Skew; + + /** This attribute specifies the specularity of an extrusion object in percent. + */ + [optional, property] double Specularity; + + /** This property defines the projection mode. + */ + [optional, property] com::sun::star::drawing::ProjectionMode ProjectionMode; + + /** This attribute specifies the viewpoint of the observer. + */ + [optional, property] ::com::sun::star::drawing::Position3D ViewPoint; + + /** This attribute specifies the origin within the bounding box of the + shape in terms of the shape size fractions. + */ + [optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Origin; + + /** This attribute specifies if the "SecondFillColor" is used as extrusion color + */ + [optional, property] boolean ExtrusionColor; +}; + + +}; }; }; }; + +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |