diff options
Diffstat (limited to 'sd/source/ui/view/drviews2.cxx')
| -rw-r--r-- | sd/source/ui/view/drviews2.cxx | 3843 |
1 files changed, 3843 insertions, 0 deletions
diff --git a/sd/source/ui/view/drviews2.cxx b/sd/source/ui/view/drviews2.cxx new file mode 100644 index 000000000..58cd5e529 --- /dev/null +++ b/sd/source/ui/view/drviews2.cxx @@ -0,0 +1,3843 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <config_features.h> + +#include <avmedia/mediaplayer.hxx> + +#include <basic/sberrors.hxx> +#include <basic/sbstar.hxx> + +#include <com/sun/star/drawing/XMasterPagesSupplier.hpp> +#include <com/sun/star/drawing/XDrawPages.hpp> +#include <com/sun/star/lang/XInitialization.hpp> +#include <com/sun/star/ui/dialogs/XExecutableDialog.hpp> +#include <com/sun/star/ui/dialogs/XSLTFilterDialog.hpp> +#include <com/sun/star/frame/XDispatchProvider.hpp> +#include <com/sun/star/util/URLTransformer.hpp> +#include <com/sun/star/util/XURLTransformer.hpp> +#include <com/sun/star/scanner/XScannerManager2.hpp> +#include <com/sun/star/document/XDocumentProperties.hpp> + +#include <comphelper/processfactory.hxx> +#include <comphelper/propertysequence.hxx> +#include <comphelper/scopeguard.hxx> + +#include <editeng/contouritem.hxx> +#include <editeng/editdata.hxx> +#include <editeng/eeitem.hxx> +#include <editeng/flditem.hxx> +#include <editeng/section.hxx> +#include <editeng/editobj.hxx> +#include <editeng/CustomPropertyField.hxx> +#include <editeng/urlfieldhelper.hxx> + +#include <sal/log.hxx> + +#include <sfx2/bindings.hxx> +#include <sfx2/dispatch.hxx> +#include <sfx2/docfile.hxx> +#include <sfx2/msgpool.hxx> +#include <sfx2/msg.hxx> +#include <sfx2/request.hxx> +#include <sfx2/viewfrm.hxx> +#include <sfx2/zoomitem.hxx> + +#include <svx/compressgraphicdialog.hxx> +#include <svx/ClassificationDialog.hxx> +#include <svx/ClassificationCommon.hxx> +#include <svx/bmpmask.hxx> +#include <svx/extedit.hxx> +#include <svx/extrusionbar.hxx> +#include <svx/f3dchild.hxx> +#include <svx/fontwork.hxx> +#include <svx/fontworkbar.hxx> +#include <svx/graphichelper.hxx> +#include <svx/hlnkitem.hxx> +#include <svx/imapdlg.hxx> +#include <svx/sdtagitm.hxx> +#include <svx/svdograf.hxx> +#include <svx/svdoole2.hxx> +#include <svx/svdoutl.hxx> +#include <svx/svdpagv.hxx> +#include <svx/svdundo.hxx> +#include <svx/svxdlg.hxx> +#include <svx/svxids.hrc> +#include <svx/sdtfsitm.hxx> +#include <svx/sdmetitm.hxx> +#include <svx/xfillit0.hxx> +#include <svx/xflclit.hxx> +#include <svx/xlineit0.hxx> +#include <svx/xlnedwit.hxx> +#include <svx/xlnstwit.hxx> +#include <svx/xlnwtit.hxx> +#include <svx/chrtitem.hxx> +#include <svx/xlnclit.hxx> +#include <svx/xflgrit.hxx> + +#include <tools/diagnose_ex.h> + +#include <unotools/useroptions.hxx> + +#include <vcl/abstdlg.hxx> +#include <vcl/graph.hxx> +#include <vcl/svapp.hxx> +#include <vcl/unohelp2.hxx> +#include <vcl/weld.hxx> + +#include <editeng/cmapitem.hxx> +#include <editeng/escapementitem.hxx> +#include <editeng/kernitem.hxx> +#include <editeng/wghtitem.hxx> +#include <editeng/postitem.hxx> +#include <editeng/udlnitem.hxx> +#include <editeng/crossedoutitem.hxx> +#include <editeng/shdditem.hxx> +#include <editeng/numitem.hxx> +#include <svx/svdobj.hxx> +#include <svx/SvxColorChildWindow.hxx> +#include <editeng/outlobj.hxx> +#include <editeng/flstitem.hxx> +#include <editeng/fontitem.hxx> +#include <editeng/fhgtitem.hxx> +#include <editeng/colritem.hxx> + +#include <svl/poolitem.hxx> +#include <svl/style.hxx> +#include <svl/whiter.hxx> + +#include <app.hrc> +#include <strings.hrc> + +#include <AnimationChildWindow.hxx> +#include <DrawDocShell.hxx> +#include <DrawViewShell.hxx> +#include <LayerTabBar.hxx> +#include <Outliner.hxx> +#include <ViewShellHint.hxx> +#include <ViewShellImplementation.hxx> +#include <Window.hxx> +#include <drawdoc.hxx> +#include <drawview.hxx> +#include <fuarea.hxx> +#include <fubullet.hxx> +#include <fuchar.hxx> +#include <fucushow.hxx> +#include <fuconnct.hxx> +#include <fucopy.hxx> +#include <fudspord.hxx> +#include <fuexecuteinteraction.hxx> +#include <fuexpand.hxx> +#include <fuinsert.hxx> +#include <fuinsfil.hxx> +#include <fuline.hxx> +#include <fulinend.hxx> +#include <fulink.hxx> +#include <fumeasur.hxx> +#include <fumorph.hxx> +#include <fuoaprms.hxx> +#include <fuolbull.hxx> +#include <fupage.hxx> +#include <fuparagr.hxx> +#include <fuprlout.hxx> +#include <fuscale.hxx> +#include <fusel.hxx> +#include <fusldlg.hxx> +#include <fusnapln.hxx> +#include <fusumry.hxx> +#include <futempl.hxx> +#include <futhes.hxx> +#include <futransf.hxx> +#include <futxtatt.hxx> +#include <fuvect.hxx> +#include <futext.hxx> +#include <helpids.h> +#include <sdabstdlg.hxx> +#include <sdattr.hxx> +#include <sdpage.hxx> +#include <sdresid.hxx> +#include <unokywds.hxx> +#include <slideshow.hxx> +#include <stlsheet.hxx> +#include <undolayer.hxx> +#include <sfx2/sidebar/Sidebar.hxx> +#include <sfx2/classificationhelper.hxx> +#include <sdmod.hxx> + +#include <ViewShellBase.hxx> +#include <memory> + +using namespace ::com::sun::star; +using namespace ::com::sun::star::uno; + +#define MIN_ACTIONS_FOR_DIALOG 5000 ///< if there are more meta objects, we show a dialog during the break up + +namespace sd { + +namespace { + +const SvxFieldItem* findField(editeng::Section const & rSection) +{ + for (SfxPoolItem const * pPool: rSection.maAttributes) + { + if (pPool->Which() == EE_FEATURE_FIELD) + return static_cast<const SvxFieldItem*>(pPool); + } + return nullptr; +} + +bool hasCustomPropertyField(std::vector<editeng::Section> const & aSections, OUString const & rName) +{ + for (editeng::Section const & rSection : aSections) + { + const SvxFieldItem* pFieldItem = findField(rSection); + if (pFieldItem) + { + const editeng::CustomPropertyField* pCustomPropertyField = dynamic_cast<const editeng::CustomPropertyField*>(pFieldItem->GetField()); + if (pCustomPropertyField && pCustomPropertyField->GetName() == rName) + return true; + } + } + return false; +} + +OUString getWeightString(SfxItemSet const & rItemSet) +{ + OUString sWeightString = "NORMAL"; + + if (const SfxPoolItem* pItem = rItemSet.GetItem(EE_CHAR_WEIGHT, false)) + { + const SvxWeightItem* pWeightItem = dynamic_cast<const SvxWeightItem*>(pItem); + if (pWeightItem && pWeightItem->GetWeight() == WEIGHT_BOLD) + sWeightString = "BOLD"; + } + return sWeightString; +} + +class ClassificationCommon +{ +protected: + sd::DrawViewShell& m_rDrawViewShell; + uno::Reference<document::XDocumentProperties> m_xDocumentProperties; + uno::Reference<beans::XPropertyContainer> m_xPropertyContainer; + sfx::ClassificationKeyCreator m_aKeyCreator; +public: + ClassificationCommon(sd::DrawViewShell & rDrawViewShell) + : m_rDrawViewShell(rDrawViewShell) + , m_xDocumentProperties(SfxObjectShell::Current()->getDocProperties()) + , m_xPropertyContainer(m_xDocumentProperties->getUserDefinedProperties()) + , m_aKeyCreator(SfxClassificationHelper::getPolicyType()) + {} +}; + +class ClassificationCollector : public ClassificationCommon +{ +private: + std::vector<svx::ClassificationResult> m_aResults; + + void iterateSectionsAndCollect(std::vector<editeng::Section> const & rSections, EditTextObject const & rEditText) + { + sal_Int32 nCurrentParagraph = -1; + OUString sBlank; + + for (editeng::Section const & rSection : rSections) + { + // Insert new paragraph if needed + while (nCurrentParagraph < rSection.mnParagraph) + { + nCurrentParagraph++; + // Get Weight of current paragraph + OUString sWeightProperty = getWeightString(rEditText.GetParaAttribs(nCurrentParagraph)); + // Insert new paragraph into collection + m_aResults.push_back({ svx::ClassificationType::PARAGRAPH, sWeightProperty, sBlank, sBlank }); + } + + const SvxFieldItem* pFieldItem = findField(rSection); + const editeng::CustomPropertyField* pCustomPropertyField = pFieldItem ? + dynamic_cast<const editeng::CustomPropertyField*>(pFieldItem->GetField()) : + nullptr; + if (pCustomPropertyField) + { + const OUString& aKey = pCustomPropertyField->GetName(); + if (m_aKeyCreator.isMarkingTextKey(aKey)) + { + OUString aValue = svx::classification::getProperty(m_xPropertyContainer, aKey); + m_aResults.push_back({ svx::ClassificationType::TEXT, aValue, sBlank, sBlank }); + } + else if (m_aKeyCreator.isCategoryNameKey(aKey) || m_aKeyCreator.isCategoryIdentifierKey(aKey)) + { + OUString aValue = svx::classification::getProperty(m_xPropertyContainer, aKey); + m_aResults.push_back({ svx::ClassificationType::CATEGORY, aValue, sBlank, sBlank }); + } + else if (m_aKeyCreator.isMarkingKey(aKey)) + { + OUString aValue = svx::classification::getProperty(m_xPropertyContainer, aKey); + m_aResults.push_back({ svx::ClassificationType::MARKING, aValue, sBlank, sBlank }); + } + else if (m_aKeyCreator.isIntellectualPropertyPartKey(aKey)) + { + OUString aValue = svx::classification::getProperty(m_xPropertyContainer, aKey); + m_aResults.push_back({ svx::ClassificationType::INTELLECTUAL_PROPERTY_PART, aValue, sBlank, sBlank }); + } + } + } + } + +public: + ClassificationCollector(sd::DrawViewShell & rDrawViewShell) + : ClassificationCommon(rDrawViewShell) + {} + + std::vector<svx::ClassificationResult> const & getResults() const + { + return m_aResults; + } + + void collect() + { + // Set to MASTER mode + EditMode eOldMode = m_rDrawViewShell.GetEditMode(); + if (eOldMode != EditMode::MasterPage) + m_rDrawViewShell.ChangeEditMode(EditMode::MasterPage, false); + + // Scoped guard to revert to the previous mode + comphelper::ScopeGuard const aGuard([this, eOldMode] () { + m_rDrawViewShell.ChangeEditMode(eOldMode, false); + }); + + const sal_uInt16 nCount = m_rDrawViewShell.GetDoc()->GetMasterSdPageCount(PageKind::Standard); + + for (sal_uInt16 nPageIndex = 0; nPageIndex < nCount; ++nPageIndex) + { + SdPage* pMasterPage = m_rDrawViewShell.GetDoc()->GetMasterSdPage(nPageIndex, PageKind::Standard); + for (size_t nObject = 0; nObject < pMasterPage->GetObjCount(); ++nObject) + { + SdrObject* pObject = pMasterPage->GetObj(nObject); + SdrRectObj* pRectObject = dynamic_cast<SdrRectObj*>(pObject); + if (pRectObject && pRectObject->GetTextKind() == OBJ_TEXT) + { + OutlinerParaObject* pOutlinerParagraphObject = pRectObject->GetOutlinerParaObject(); + if (pOutlinerParagraphObject) + { + const EditTextObject& rEditText = pOutlinerParagraphObject->GetTextObject(); + std::vector<editeng::Section> aSections; + rEditText.GetAllSections(aSections); + + // Search for a custom property field that has the classification category identifier key + if (hasCustomPropertyField(aSections, m_aKeyCreator.makeCategoryNameKey())) + { + iterateSectionsAndCollect(aSections, rEditText); + return; + } + } + } + } + } + } +}; + +class ClassificationInserter : public ClassificationCommon +{ +private: + /// Delete the previous existing classification object(s) - if they exist + void deleteExistingObjects() + { + OUString sKey = m_aKeyCreator.makeCategoryNameKey(); + + const sal_uInt16 nCount = m_rDrawViewShell.GetDoc()->GetMasterSdPageCount(PageKind::Standard); + + for (sal_uInt16 nPageIndex = 0; nPageIndex < nCount; ++nPageIndex) + { + SdPage* pMasterPage = m_rDrawViewShell.GetDoc()->GetMasterSdPage(nPageIndex, PageKind::Standard); + for (size_t nObject = 0; nObject < pMasterPage->GetObjCount(); ++nObject) + { + SdrObject* pObject = pMasterPage->GetObj(nObject); + SdrRectObj* pRectObject = dynamic_cast<SdrRectObj*>(pObject); + if (pRectObject && pRectObject->GetTextKind() == OBJ_TEXT) + { + OutlinerParaObject* pOutlinerParagraphObject = pRectObject->GetOutlinerParaObject(); + if (pOutlinerParagraphObject) + { + const EditTextObject& rEditText = pOutlinerParagraphObject->GetTextObject(); + std::vector<editeng::Section> aSections; + rEditText.GetAllSections(aSections); + + if (hasCustomPropertyField(aSections, sKey)) + { + pMasterPage->RemoveObject(pRectObject->GetOrdNum()); + } + } + } + } + } + } + + void fillTheOutliner(Outliner* pOutliner, std::vector<svx::ClassificationResult> const & rResults) + { + sal_Int32 nParagraph = -1; + for (svx::ClassificationResult const & rResult : rResults) + { + + ESelection aPosition(nParagraph, EE_TEXTPOS_MAX_COUNT, nParagraph, EE_TEXTPOS_MAX_COUNT); + + switch (rResult.meType) + { + case svx::ClassificationType::TEXT: + { + OUString sKey = m_aKeyCreator.makeNumberedTextKey(); + svx::classification::addOrInsertDocumentProperty(m_xPropertyContainer, sKey, rResult.msName); + pOutliner->QuickInsertField(SvxFieldItem(editeng::CustomPropertyField(sKey, rResult.msName), EE_FEATURE_FIELD), aPosition); + } + break; + + case svx::ClassificationType::CATEGORY: + { + OUString sKey = m_aKeyCreator.makeCategoryNameKey(); + pOutliner->QuickInsertField(SvxFieldItem(editeng::CustomPropertyField(sKey, rResult.msName), EE_FEATURE_FIELD), aPosition); + } + break; + + case svx::ClassificationType::MARKING: + { + OUString sKey = m_aKeyCreator.makeNumberedMarkingKey(); + svx::classification::addOrInsertDocumentProperty(m_xPropertyContainer, sKey, rResult.msName); + pOutliner->QuickInsertField(SvxFieldItem(editeng::CustomPropertyField(sKey, rResult.msName), EE_FEATURE_FIELD), aPosition); + } + break; + + case svx::ClassificationType::INTELLECTUAL_PROPERTY_PART: + { + OUString sKey = m_aKeyCreator.makeNumberedIntellectualPropertyPartKey(); + svx::classification::addOrInsertDocumentProperty(m_xPropertyContainer, sKey, rResult.msName); + pOutliner->QuickInsertField(SvxFieldItem(editeng::CustomPropertyField(sKey, rResult.msName), EE_FEATURE_FIELD), aPosition); + } + break; + + case svx::ClassificationType::PARAGRAPH: + { + nParagraph++; + pOutliner->Insert(""); + + SfxItemSet aItemSet(m_rDrawViewShell.GetDoc()->GetPool(), svl::Items<EE_ITEMS_START, EE_ITEMS_END>{}); + + if (rResult.msName == "BOLD") + aItemSet.Put(SvxWeightItem(WEIGHT_BOLD, EE_CHAR_WEIGHT)); + else + aItemSet.Put(SvxWeightItem(WEIGHT_NORMAL, EE_CHAR_WEIGHT)); + + SvxNumRule aDefaultNumRule(SvxNumRuleFlags::NONE, 0, false); + aItemSet.Put(SvxNumBulletItem(aDefaultNumRule, EE_PARA_NUMBULLET)); + + pOutliner->SetParaAttribs(nParagraph, aItemSet); + } + break; + + default: + break; + } + } + } + +public: + ClassificationInserter(sd::DrawViewShell & rDrawViewShell) + : ClassificationCommon(rDrawViewShell) + { + } + + void insert(std::vector<svx::ClassificationResult> const & rResults) + { + // Set to MASTER mode + EditMode eOldMode = m_rDrawViewShell.GetEditMode(); + if (eOldMode != EditMode::MasterPage) + m_rDrawViewShell.ChangeEditMode(EditMode::MasterPage, false); + + // Scoped guard to revert the mode + comphelper::ScopeGuard const aGuard([this, eOldMode] () { + m_rDrawViewShell.ChangeEditMode(eOldMode, false); + }); + + // Delete the previous existing object - if exists + deleteExistingObjects(); + + // Clear properties + svx::classification::removeAllProperties(m_xPropertyContainer); + + SfxClassificationHelper aHelper(m_xDocumentProperties); + + // Apply properties from the BA policy + for (svx::ClassificationResult const & rResult : rResults) + { + if (rResult.meType == svx::ClassificationType::CATEGORY) + aHelper.SetBACName(rResult.msName, SfxClassificationHelper::getPolicyType()); + } + + // Insert full text as document property + svx::classification::insertFullTextualRepresentationAsDocumentProperty(m_xPropertyContainer, m_aKeyCreator, rResults); + + // Create the outliner from the + Outliner* pOutliner = m_rDrawViewShell.GetDoc()->GetInternalOutliner(); + OutlinerMode eOutlinerMode = pOutliner->GetMode(); + + comphelper::ScopeGuard const aOutlinerGuard([pOutliner, eOutlinerMode] () { + pOutliner->Init(eOutlinerMode); + }); + + pOutliner->Init(OutlinerMode::TextObject); + + // Fill the outliner with the text from classification result + fillTheOutliner(pOutliner, rResults); + + // Calculate to outliner text size + pOutliner->UpdateFields(); + pOutliner->SetUpdateMode(true); + Size aTextSize(pOutliner->CalcTextSize()); + pOutliner->SetUpdateMode(false); + + // Create objects, apply the outliner and add them (objects) to all master pages + const sal_uInt16 nCount = m_rDrawViewShell.GetDoc()->GetMasterSdPageCount(PageKind::Standard); + + for (sal_uInt16 nPageIndex = 0; nPageIndex < nCount; ++nPageIndex) + { + SdPage* pMasterPage = m_rDrawViewShell.GetDoc()->GetMasterSdPage(nPageIndex, PageKind::Standard); + if (!pMasterPage) + continue; + + SdrRectObj* pObject = new SdrRectObj( + *m_rDrawViewShell.GetDoc(), // TTTT should be reference + OBJ_TEXT); + pObject->SetMergedItem(makeSdrTextAutoGrowWidthItem(true)); + pObject->SetOutlinerParaObject(pOutliner->CreateParaObject()); + pMasterPage->InsertObject(pObject); + + // Calculate position + ::tools::Rectangle aRectangle(Point(), pMasterPage->GetSize()); + Point aPosition(aRectangle.Center().X(), aRectangle.Bottom()); + + aPosition.AdjustX( -(aTextSize.Width() / 2) ); + aPosition.AdjustY( -(aTextSize.Height()) ); + + pObject->SetLogicRect(::tools::Rectangle(aPosition, aTextSize)); + } + } +}; + + void lcl_convertStringArguments(sal_uInt16 nSlot, std::unique_ptr<SfxItemSet>& pArgs) + { + Color aColor; + OUString sColor; + const SfxPoolItem* pItem = nullptr; + + if (SfxItemState::SET == pArgs->GetItemState(SID_ATTR_LINE_WIDTH_ARG, false, &pItem)) + { + double fValue = static_cast<const SvxDoubleItem*>(pItem)->GetValue(); + // FIXME: different units... + int nPow = 100; + int nValue = fValue * nPow; + + XLineWidthItem aItem(nValue); + pArgs->Put(aItem); + } + if (SfxItemState::SET == pArgs->GetItemState(SID_ATTR_COLOR_STR, false, &pItem)) + { + sColor = static_cast<const SfxStringItem*>(pItem)->GetValue(); + + if (sColor == "transparent") + aColor = COL_TRANSPARENT; + else + aColor = Color(sColor.toInt32(16)); + + switch (nSlot) + { + case SID_ATTR_LINE_COLOR: + { + XLineColorItem aLineColorItem(OUString(), aColor); + pArgs->Put(aLineColorItem); + break; + } + + case SID_ATTR_FILL_COLOR: + { + XFillColorItem aFillColorItem(OUString(), aColor); + pArgs->Put(aFillColorItem); + break; + } + } + } + if (SfxItemState::SET == pArgs->GetItemState(SID_FILL_GRADIENT_JSON, false, &pItem)) + { + const SfxStringItem* pJSON = static_cast<const SfxStringItem*>(pItem); + if (pJSON) + { + XGradient aGradient = XGradient::fromJSON(pJSON->GetValue()); + XFillGradientItem aItem(aGradient); + pArgs->Put(aItem); + } + } + } +} + +/** + * SfxRequests for temporary actions + */ + +void DrawViewShell::FuTemporary(SfxRequest& rReq) +{ + // during a native slide show nothing gets executed! + if(SlideShow::IsRunning( GetViewShellBase() ) && (rReq.GetSlot() != SID_NAVIGATOR)) + return; + + DBG_ASSERT( mpDrawView, "sd::DrawViewShell::FuTemporary(), no draw view!" ); + if( !mpDrawView ) + return; + + CheckLineTo (rReq); + + DeactivateCurrentFunction(); + + sal_uInt16 nSId = rReq.GetSlot(); + + switch ( nSId ) + { + case SID_OUTLINE_TEXT_AUTOFIT: + { + SfxUndoManager* pUndoManager = GetDocSh()->GetUndoManager(); + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + if( rMarkList.GetMarkCount() == 1 ) + { + pUndoManager->EnterListAction("", "", 0, GetViewShellBase().GetViewShellId()); + mpDrawView->BegUndo(); + + SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj(); + bool bSet = pObj->GetMergedItemSet().GetItem<SdrTextFitToSizeTypeItem>(SDRATTR_TEXT_FITTOSIZE)->GetValue() != drawing::TextFitToSizeType_NONE; + + mpDrawView->AddUndo(GetDoc()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj)); + + if (!bSet) + { + //If we are turning on AutoFit we have to turn these off if already on + if (pObj->GetMergedItemSet().GetItem<SdrOnOffItem>(SDRATTR_TEXT_AUTOGROWHEIGHT)->GetValue()) + pObj->SetMergedItem(makeSdrTextAutoGrowHeightItem(false)); + if (pObj->GetMergedItemSet().GetItem<SdrOnOffItem>(SDRATTR_TEXT_AUTOGROWWIDTH)->GetValue()) + pObj->SetMergedItem(makeSdrTextAutoGrowWidthItem(false)); + } + + pObj->SetMergedItem(SdrTextFitToSizeTypeItem(bSet ? drawing::TextFitToSizeType_NONE : drawing::TextFitToSizeType_AUTOFIT)); + + mpDrawView->EndUndo(); + pUndoManager->LeaveListAction(); + } + Cancel(); + rReq.Done(); + } + break; + + // area and line attributes: shall have + // an own Execute method (like StateMethode) + case SID_ATTR_FILL_STYLE: + case SID_ATTR_FILL_COLOR: + case SID_ATTR_FILL_GRADIENT: + case SID_ATTR_FILL_HATCH: + case SID_ATTR_FILL_BITMAP: + case SID_ATTR_FILL_SHADOW: + case SID_ATTR_SHADOW_COLOR: + case SID_ATTR_SHADOW_TRANSPARENCE: + case SID_ATTR_SHADOW_XDISTANCE: + case SID_ATTR_SHADOW_YDISTANCE: + case SID_ATTR_FILL_TRANSPARENCE: + case SID_ATTR_FILL_FLOATTRANSPARENCE: + + case SID_ATTR_LINE_STYLE: + case SID_ATTR_LINE_DASH: + case SID_ATTR_LINE_WIDTH: + case SID_ATTR_LINE_COLOR: + case SID_ATTR_LINEEND_STYLE: + case SID_ATTR_LINE_START: + case SID_ATTR_LINE_END: + case SID_ATTR_LINE_TRANSPARENCE: + case SID_ATTR_LINE_JOINT: + case SID_ATTR_LINE_CAP: + + case SID_ATTR_TEXT_FITTOSIZE: + { + if( rReq.GetArgs() ) + { + std::unique_ptr<SfxItemSet> pNewArgs = rReq.GetArgs()->Clone(); + lcl_convertStringArguments(rReq.GetSlot(), pNewArgs); + mpDrawView->SetAttributes(*pNewArgs); + rReq.Done(); + } + else + { + switch( rReq.GetSlot() ) + { + case SID_ATTR_FILL_SHADOW: + case SID_ATTR_SHADOW_COLOR: + case SID_ATTR_SHADOW_TRANSPARENCE: + case SID_ATTR_SHADOW_XDISTANCE: + case SID_ATTR_SHADOW_YDISTANCE: + case SID_ATTR_FILL_STYLE: + case SID_ATTR_FILL_COLOR: + case SID_ATTR_FILL_GRADIENT: + case SID_ATTR_FILL_HATCH: + case SID_ATTR_FILL_BITMAP: + case SID_ATTR_FILL_TRANSPARENCE: + case SID_ATTR_FILL_FLOATTRANSPARENCE: + GetViewFrame()->GetDispatcher()->Execute( SID_ATTRIBUTES_AREA, SfxCallMode::ASYNCHRON ); + break; + case SID_ATTR_LINE_STYLE: + case SID_ATTR_LINE_DASH: + case SID_ATTR_LINE_WIDTH: + case SID_ATTR_LINE_COLOR: + case SID_ATTR_LINE_TRANSPARENCE: + case SID_ATTR_LINE_JOINT: + case SID_ATTR_LINE_CAP: + GetViewFrame()->GetDispatcher()->Execute( SID_ATTRIBUTES_LINE, SfxCallMode::ASYNCHRON ); + break; + case SID_ATTR_TEXT_FITTOSIZE: + GetViewFrame()->GetDispatcher()->Execute( SID_TEXTATTR_DLG, SfxCallMode::ASYNCHRON ); + break; + } + } + Cancel(); + } + break; + + case SID_HYPHENATION: + { + const SfxBoolItem* pItem = rReq.GetArg<SfxBoolItem>(SID_HYPHENATION); + + if( pItem ) + { + SfxItemSet aSet( GetPool(), svl::Items<EE_PARA_HYPHENATE, EE_PARA_HYPHENATE>{} ); + bool bValue = pItem->GetValue(); + aSet.Put( SfxBoolItem( EE_PARA_HYPHENATE, bValue ) ); + mpDrawView->SetAttributes( aSet ); + } + else // only for testing purpose + { + OSL_FAIL(" no value for hyphenation!"); + SfxItemSet aSet( GetPool(), svl::Items<EE_PARA_HYPHENATE, EE_PARA_HYPHENATE>{} ); + aSet.Put( SfxBoolItem( EE_PARA_HYPHENATE, true ) ); + mpDrawView->SetAttributes( aSet ); + } + rReq.Done(); + Cancel(); + } + break; + + case SID_INSERTPAGE: + case SID_INSERTPAGE_QUICK: + case SID_DUPLICATE_PAGE: + { + SdPage* pNewPage = CreateOrDuplicatePage (rReq, mePageKind, GetActualPage()); + Cancel(); + if(HasCurrentFunction(SID_BEZIER_EDIT) ) + GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + if (pNewPage != nullptr) + SwitchPage((pNewPage->GetPageNum()-1)/2); + rReq.Done (); + } + break; + + case SID_INSERT_MASTER_PAGE: + { + // Use the API to create a new page. + Reference<drawing::XMasterPagesSupplier> xMasterPagesSupplier ( + GetDoc()->getUnoModel(), UNO_QUERY); + if (xMasterPagesSupplier.is()) + { + Reference<drawing::XDrawPages> xMasterPages ( + xMasterPagesSupplier->getMasterPages()); + if (xMasterPages.is()) + { + sal_uInt16 nIndex = GetCurPagePos() + 1; + xMasterPages->insertNewByIndex (nIndex); + + // Create shapes for the default layout. + SdPage* pMasterPage = GetDoc()->GetMasterSdPage( + nIndex, PageKind::Standard); + pMasterPage->CreateTitleAndLayout (true,true); + } + } + + Cancel(); + if(HasCurrentFunction(SID_BEZIER_EDIT)) + GetViewFrame()->GetDispatcher()->Execute( + SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + rReq.Done (); + } + break; + + case SID_MODIFYPAGE: + { + if (mePageKind==PageKind::Standard || mePageKind==PageKind::Notes || + (mePageKind==PageKind::Handout && meEditMode==EditMode::MasterPage) ) + { + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + sal_uInt16 nPage = maTabControl->GetCurPagePos(); + mpActualPage = GetDoc()->GetSdPage(nPage, mePageKind); + ::sd::ViewShell::mpImpl->ProcessModifyPageSlot ( + rReq, + mpActualPage, + mePageKind); + } + + Cancel(); + rReq.Done (); + } + break; + + case SID_ASSIGN_LAYOUT: + { + if (mePageKind==PageKind::Standard || mePageKind==PageKind::Notes || (mePageKind==PageKind::Handout && meEditMode==EditMode::MasterPage)) + { + if ( mpDrawView->IsTextEdit() ) + mpDrawView->SdrEndTextEdit(); + + ::sd::ViewShell::mpImpl->AssignLayout(rReq, mePageKind); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_RENAMEPAGE: + case SID_RENAME_MASTER_PAGE: + { + if (mePageKind==PageKind::Standard || mePageKind==PageKind::Notes ) + { + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + + sal_uInt16 nPage = maTabControl->GetCurPagePos(); + SdPage* pCurrentPage = ( GetEditMode() == EditMode::Page ) + ? GetDoc()->GetSdPage( nPage, GetPageKind() ) + : GetDoc()->GetMasterSdPage( nPage, GetPageKind() ); + + OUString aTitle = SdResId(STR_TITLE_RENAMESLIDE); + OUString aDescr = SdResId(STR_DESC_RENAMESLIDE); + const OUString& aPageName = pCurrentPage->GetName(); + + if(rReq.GetArgs()) + { + OUString aName = rReq.GetArgs()->GetItem<const SfxStringItem>(SID_RENAMEPAGE)->GetValue(); + + bool bResult = RenameSlide( maTabControl->GetPageId(nPage), aName ); + DBG_ASSERT( bResult, "Couldn't rename slide" ); + } + else + { + SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create(); + ScopedVclPtr<AbstractSvxNameDialog> aNameDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aPageName, aDescr)); + aNameDlg->SetText( aTitle ); + aNameDlg->SetCheckNameHdl( LINK( this, DrawViewShell, RenameSlideHdl ), true ); + aNameDlg->SetEditHelpId( HID_SD_NAMEDIALOG_PAGE ); + + if( aNameDlg->Execute() == RET_OK ) + { + OUString aNewName; + aNameDlg->GetName( aNewName ); + if (aNewName != aPageName) + { + bool bResult = RenameSlide( maTabControl->GetPageId(nPage), aNewName ); + DBG_ASSERT( bResult, "Couldn't rename slide" ); + } + } + } + } + Cancel(); + rReq.Ignore(); + } + break; + + case SID_RENAMEPAGE_QUICK: + { + if (mePageKind==PageKind::Standard || mePageKind==PageKind::Notes ) + { + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + + maTabControl->StartEditMode( maTabControl->GetCurPageId() ); + } + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_PAGESIZE : // either this (no menu entries or something else!) + { + const SfxItemSet *pArgs = rReq.GetArgs (); + + if (pArgs && pArgs->Count () == 3) + { + const SfxUInt32Item* pWidth = rReq.GetArg<SfxUInt32Item>(ID_VAL_PAGEWIDTH); + const SfxUInt32Item* pHeight = rReq.GetArg<SfxUInt32Item>(ID_VAL_PAGEHEIGHT); + const SfxBoolItem* pScaleAll = rReq.GetArg<SfxBoolItem>(ID_VAL_SCALEOBJECTS); + + Size aSize (pWidth->GetValue (), pHeight->GetValue ()); + + SetupPage (aSize, 0, 0, 0, 0, true, false, pScaleAll->GetValue ()); + rReq.Ignore (); + break; + } +#if HAVE_FEATURE_SCRIPTING + StarBASIC::FatalError (ERRCODE_BASIC_WRONG_ARGS); +#endif + rReq.Ignore (); + break; + } + + case SID_PAGEMARGIN : // or this (no menu entries or something else!) + { + const SfxItemSet *pArgs = rReq.GetArgs (); + + if (pArgs && pArgs->Count () == 5) + { + const SfxUInt32Item* pLeft = rReq.GetArg<SfxUInt32Item>(ID_VAL_PAGELEFT); + const SfxUInt32Item* pRight = rReq.GetArg<SfxUInt32Item>(ID_VAL_PAGERIGHT); + const SfxUInt32Item* pUpper = rReq.GetArg<SfxUInt32Item>(ID_VAL_PAGETOP); + const SfxUInt32Item* pLower = rReq.GetArg<SfxUInt32Item>(ID_VAL_PAGEBOTTOM); + const SfxBoolItem* pScaleAll = rReq.GetArg<SfxBoolItem>(ID_VAL_SCALEOBJECTS); + + Size aEmptySize (0, 0); + + SetupPage (aEmptySize, pLeft->GetValue (), pRight->GetValue (), + pUpper->GetValue (), pLower->GetValue (), + false, true, pScaleAll->GetValue ()); + rReq.Ignore (); + break; + } +#if HAVE_FEATURE_SCRIPTING + StarBASIC::FatalError (ERRCODE_BASIC_WRONG_ARGS); +#endif + rReq.Ignore (); + break; + } + + case SID_ATTR_ZOOMSLIDER: + { + const SfxItemSet* pArgs = rReq.GetArgs(); + + const SfxUInt16Item* pScale = (pArgs && pArgs->Count () == 1) ? + rReq.GetArg<SfxUInt16Item>(SID_ATTR_ZOOMSLIDER) : nullptr; + if (pScale && CHECK_RANGE (5, pScale->GetValue (), 3000)) + { + SetZoom (pScale->GetValue ()); + + SfxBindings& rBindings = GetViewFrame()->GetBindings(); + rBindings.Invalidate( SID_ATTR_ZOOM ); + rBindings.Invalidate( SID_ZOOM_IN ); + rBindings.Invalidate( SID_ZOOM_OUT ); + rBindings.Invalidate( SID_ATTR_ZOOMSLIDER ); + + } + + Cancel(); + rReq.Done (); + break; + } + + case SID_ATTR_ZOOM: + { + const SfxItemSet* pArgs = rReq.GetArgs(); + mbZoomOnPage = false; + + if ( pArgs ) + { + SvxZoomType eZT = pArgs->Get( SID_ATTR_ZOOM ).GetType(); + switch( eZT ) + { + case SvxZoomType::PERCENT: + SetZoom( static_cast<long>( pArgs->Get( SID_ATTR_ZOOM ).GetValue()) ); + break; + + case SvxZoomType::OPTIMAL: + GetViewFrame()->GetDispatcher()->Execute( SID_SIZE_ALL, + SfxCallMode::ASYNCHRON | SfxCallMode::RECORD ); + break; + + case SvxZoomType::PAGEWIDTH: + GetViewFrame()->GetDispatcher()->Execute( SID_SIZE_PAGE_WIDTH, + SfxCallMode::ASYNCHRON | SfxCallMode::RECORD ); + break; + + case SvxZoomType::WHOLEPAGE: + GetViewFrame()->GetDispatcher()->Execute( SID_SIZE_PAGE, + SfxCallMode::ASYNCHRON | SfxCallMode::RECORD ); + break; + case SvxZoomType::PAGEWIDTH_NOBORDER: + OSL_FAIL("sd::DrawViewShell::FuTemporary(), SvxZoomType::PAGEWIDTH_NOBORDER not handled!" ); + break; + } + rReq.Ignore (); + } + else + { + // open zoom dialog + SetCurrentFunction( FuScale::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + } + Cancel(); + } + break; + + case SID_CHANGEBEZIER: + case SID_CHANGEPOLYGON: + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + } + + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + if( rReq.GetSlot() == SID_CHANGEBEZIER ) + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->ConvertMarkedToPathObj(false); + } + else + { + if( mpDrawView->IsVectorizeAllowed() ) + { + SetCurrentFunction( FuVectorize::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->ConvertMarkedToPolyObj(); + } + } + + Invalidate(SID_CHANGEBEZIER); + Invalidate(SID_CHANGEPOLYGON); + } + Cancel(); + + if( HasCurrentFunction(SID_BEZIER_EDIT) ) + { // where applicable, activate right edit action + GetViewFrame()->GetDispatcher()->Execute(SID_SWITCH_POINTEDIT, + SfxCallMode::ASYNCHRON | SfxCallMode::RECORD); + } + rReq.Ignore (); + break; + + case SID_CONVERT_TO_CONTOUR: + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + } + + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->ConvertMarkedToPathObj(true); + + Invalidate(SID_CONVERT_TO_CONTOUR); + } + Cancel(); + + rReq.Ignore (); + break; + + case SID_CONVERT_TO_METAFILE: + case SID_CONVERT_TO_BITMAP: + { + // End text edit mode when it is active because the metafile or + // bitmap that will be created does not support it. + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + } + + if ( mpDrawView->IsPresObjSelected(true,true,true) ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + + // create SdrGrafObj from metafile/bitmap + Graphic aGraphic; + switch (nSId) + { + case SID_CONVERT_TO_METAFILE: + { + // switch on undo for the next operations + mpDrawView->BegUndo(SdResId(STR_UNDO_CONVERT_TO_METAFILE)); + GDIMetaFile aMetaFile(mpDrawView->GetMarkedObjMetaFile()); + aGraphic = Graphic(aMetaFile); + } + break; + case SID_CONVERT_TO_BITMAP: + { + // Disable spelling during conversion + bool bOnlineSpell = GetDoc()->GetOnlineSpell(); + GetDoc()->SetOnlineSpell(false); + + // switch on undo for the next operations + mpDrawView->BegUndo(SdResId(STR_UNDO_CONVERT_TO_BITMAP)); + bool bDone(false); + + // I have to get the image here directly since GetMarkedObjBitmapEx works + // based on Bitmaps, but not on BitmapEx, thus throwing away the alpha + // channel. Argh! GetMarkedObjBitmapEx itself is too widely used to safely + // change that, e.g. in the exchange formats. For now I can only add this + // exception to get good results for Svgs. This is how the code gets more + // and more crowded, at last I made a remark for myself to change this + // as one of the next tasks. + if(1 == mpDrawView->GetMarkedObjectCount()) + { + const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(mpDrawView->GetMarkedObjectByIndex(0)); + + if(pSdrGrafObj && pSdrGrafObj->isEmbeddedVectorGraphicData()) + { + aGraphic = Graphic(pSdrGrafObj->GetGraphic().getVectorGraphicData()->getReplacement()); + bDone = true; + } + } + + if(!bDone) + { + aGraphic = Graphic(mpDrawView->GetMarkedObjBitmapEx()); + } + // Restore online spelling + GetDoc()->SetOnlineSpell(bOnlineSpell); + } + break; + } + + // create new object + SdrGrafObj* pGraphicObj = new SdrGrafObj( + *GetDoc(), + aGraphic); + + // get some necessary info and ensure it + const SdrMarkList& rMarkList(mpDrawView->GetMarkedObjectList()); + const size_t nMarkCount(rMarkList.GetMarkCount()); + SdrPageView* pPageView = mpDrawView->GetSdrPageView(); + OSL_ENSURE(nMarkCount, "DrawViewShell::FuTemporary: SID_CONVERT_TO_BITMAP with empty selection (!)"); + OSL_ENSURE(pPageView, "DrawViewShell::FuTemporary: SID_CONVERT_TO_BITMAP without SdrPageView (!)"); + + // fit rectangle of new graphic object to selection's mark rect + ::tools::Rectangle aAllMarkedRect; + rMarkList.TakeBoundRect(pPageView, aAllMarkedRect); + pGraphicObj->SetLogicRect(aAllMarkedRect); + + // #i71540# to keep the order, it is necessary to replace the lowest object + // of the selection with the new object. This also means that with multi + // selection, all other objects need to be deleted first + SdrMark* pFirstMark = rMarkList.GetMark(0); + SdrObject* pReplacementCandidate = pFirstMark->GetMarkedSdrObj(); + + if(nMarkCount > 1) + { + // take first object out of selection + mpDrawView->MarkObj(pReplacementCandidate, pPageView, true, true); + + // clear remaining selection + mpDrawView->DeleteMarkedObj(); + } + + // #i124816# copy layer from lowest object which gets replaced + pGraphicObj->SetLayer(pReplacementCandidate->GetLayer()); + + // now replace lowest object with new one + mpDrawView->ReplaceObjectAtView(pReplacementCandidate, *pPageView, pGraphicObj); + + // switch off undo + mpDrawView->EndUndo(); + } + } + + Cancel(); + + rReq.Done (); + break; + + case SID_REMOVE_HYPERLINK: + { + if (mpDrawView->IsTextEdit()) + { + // First make sure the field is selected + OutlinerView* pOutView = mpDrawView->GetTextEditOutlinerView(); + if (pOutView) + { + pOutView->SelectFieldAtCursor(); + URLFieldHelper::RemoveURLField(pOutView->GetEditView()); + } + } + } + Cancel(); + rReq.Done (); + break; + + case SID_SET_DEFAULT: + { + std::unique_ptr<SfxItemSet> pSet; + + if (mpDrawView->IsTextEdit()) + { + pSet.reset(new SfxItemSet( GetPool(), svl::Items<EE_ITEMS_START, EE_ITEMS_END>{} )); + mpDrawView->SetAttributes( *pSet, true ); + } + else + { + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + const size_t nCount = rMarkList.GetMarkCount(); + + // For every presentation object a SfxItemSet of hard attributes + // and the UserCall is stored in this list. This is because + // at the following mpDrawView->SetAttributes( *pSet, sal_True ) + // they get lost and have to be restored. + std::vector<std::pair<std::unique_ptr<SfxItemSet>,SdrObjUserCall*> > aAttrList; + SdPage* pPresPage = static_cast<SdPage*>( mpDrawView->GetSdrPageView()->GetPage() ); + + for ( size_t i = 0; i < nCount; ++i ) + { + SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj(); + + if( pPresPage->IsPresObj( pObj ) ) + { + auto pNewSet = std::make_unique<SfxItemSet>( GetDoc()->GetPool(), svl::Items<SDRATTR_TEXT_MINFRAMEHEIGHT, SDRATTR_TEXT_AUTOGROWHEIGHT>{} ); + pNewSet->Put(pObj->GetMergedItemSet()); + aAttrList.emplace_back(std::move(pNewSet), pObj->GetUserCall()); + } + } + + pSet.reset(new SfxItemSet( GetPool() )); + mpDrawView->SetAttributes( *pSet, true ); + + sal_uLong j = 0; + + for ( size_t i = 0; i < nCount; ++i ) + { + SfxStyleSheet* pSheet = nullptr; + SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj(); + + if (pObj->GetObjIdentifier() == OBJ_TITLETEXT) + { + pSheet = mpActualPage->GetStyleSheetForPresObj(PresObjKind::Title); + if (pSheet) + pObj->SetStyleSheet(pSheet, false); + } + else if(pObj->GetObjIdentifier() == OBJ_OUTLINETEXT) + { + for (sal_uInt16 nLevel = 1; nLevel < 10; nLevel++) + { + pSheet = mpActualPage->GetStyleSheetForPresObj( PresObjKind::Outline ); + DBG_ASSERT(pSheet, "Template for outline object not found"); + if (pSheet) + { + pObj->StartListening(*pSheet); + + if( nLevel == 1 ) + // text frame listens on StyleSheet of level1 + pObj->NbcSetStyleSheet(pSheet, false); + } + } + } + + if( pPresPage->IsPresObj( pObj ) ) + { + std::pair<std::unique_ptr<SfxItemSet>,SdrObjUserCall*> &rAttr = aAttrList[j++]; + + std::unique_ptr<SfxItemSet> & pNewSet(rAttr.first); + SdrObjUserCall* pUserCall = rAttr.second; + + if ( pNewSet && pNewSet->GetItemState( SDRATTR_TEXT_MINFRAMEHEIGHT ) == SfxItemState::SET ) + { + pObj->SetMergedItem(pNewSet->Get(SDRATTR_TEXT_MINFRAMEHEIGHT)); + } + + if ( pNewSet && pNewSet->GetItemState( SDRATTR_TEXT_AUTOGROWHEIGHT ) == SfxItemState::SET ) + { + pObj->SetMergedItem(pNewSet->Get(SDRATTR_TEXT_AUTOGROWHEIGHT)); + } + + if( pUserCall ) + pObj->SetUserCall( pUserCall ); + } + } + } + + pSet.reset(); + Cancel(); + } + break; + + case SID_DELETE_SNAPITEM: + { + SdrPageView* pPV; + Point aMPos = GetActiveWindow()->PixelToLogic( maMousePos ); + sal_uInt16 nHitLog = static_cast<sal_uInt16>(GetActiveWindow()->PixelToLogic( Size( + FuPoor::HITPIX, 0 ) ).Width()); + sal_uInt16 nHelpLine; + + mbMousePosFreezed = false; + + if( mpDrawView->PickHelpLine( aMPos, nHitLog, *GetActiveWindow(), nHelpLine, pPV) ) + { + pPV->DeleteHelpLine( nHelpLine ); + } + Cancel(); + rReq.Ignore (); + } + break; + + case SID_DELETE_PAGE: + case SID_DELETE_MASTER_PAGE: + DeleteActualPage(); + Cancel(); + rReq.Ignore (); + break; + + case SID_DELETE_LAYER: + DeleteActualLayer(); + Cancel(); + rReq.Ignore (); + break; + + case SID_ORIGINAL_SIZE: + mpDrawView->SetMarkedOriginalSize(); + Cancel(); + rReq.Done(); + break; + + case SID_DRAW_FONTWORK: + case SID_DRAW_FONTWORK_VERTICAL: + { + svx::FontworkBar::execute(*mpView, rReq, GetViewFrame()->GetBindings()); // SJ: can be removed (I think) + Cancel(); + rReq.Done(); + } + break; + + case SID_SAVE_GRAPHIC: + { + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + if( rMarkList.GetMarkCount() == 1 ) + { + const SdrGrafObj* pObj = dynamic_cast<const SdrGrafObj*>(rMarkList.GetMark(0)->GetMarkedSdrObj()); + if (pObj && pObj->GetGraphicType() == GraphicType::Bitmap) + { + weld::Window* pFrame = GetFrameWeld(); + GraphicAttr aGraphicAttr = pObj->GetGraphicAttr(); + short nState = RET_CANCEL; + if (aGraphicAttr != GraphicAttr()) // the image has been modified + { + if (pFrame) + { + nState = GraphicHelper::HasToSaveTransformedImage(pFrame); + } + } + else + { + nState = RET_NO; + } + + if (nState == RET_YES) + { + GraphicHelper::ExportGraphic(pFrame, pObj->GetTransformedGraphic(), ""); + } + else if (nState == RET_NO) + { + const GraphicObject& aGraphicObject(pObj->GetGraphicObject()); + GraphicHelper::ExportGraphic(pFrame, aGraphicObject.GetGraphic(), ""); + } + } + } + Cancel(); + rReq.Ignore(); + } + break; + + case SID_EXTERNAL_EDIT: + { + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + if( rMarkList.GetMarkCount() == 1 ) + { + SdrObject* pObj = rMarkList.GetMark( 0 )->GetMarkedSdrObj(); + if( dynamic_cast< const SdrGrafObj *>( pObj ) && static_cast<SdrGrafObj*>(pObj)->GetGraphicType() == GraphicType::Bitmap ) + { + GraphicObject aGraphicObject( static_cast<SdrGrafObj*>(pObj)->GetGraphicObject() ); + m_ExternalEdits.push_back( + std::make_unique<SdrExternalToolEdit>( + mpDrawView.get(), pObj)); + m_ExternalEdits.back()->Edit( &aGraphicObject ); + } + } + Cancel(); + rReq.Ignore(); + } + break; + + case SID_COMPRESS_GRAPHIC: + { + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + if( rMarkList.GetMarkCount() == 1 ) + { + SdrObject* pObj = rMarkList.GetMark( 0 )->GetMarkedSdrObj(); + + if( dynamic_cast< const SdrGrafObj *>( pObj ) && static_cast<SdrGrafObj*>(pObj)->GetGraphicType() == GraphicType::Bitmap ) + { + SdrGrafObj* pGraphicObj = static_cast<SdrGrafObj*>(pObj); + CompressGraphicsDialog dialog(GetFrameWeld(), pGraphicObj, GetViewFrame()->GetBindings() ); + if (dialog.run() == RET_OK) + { + SdrGrafObj* pNewObject = dialog.GetCompressedSdrGrafObj(); + SdrPageView* pPageView = mpDrawView->GetSdrPageView(); + OUString aUndoString = mpDrawView->GetDescriptionOfMarkedObjects() + " Compress"; + mpDrawView->BegUndo( aUndoString ); + mpDrawView->ReplaceObjectAtView( pObj, *pPageView, pNewObject ); + mpDrawView->EndUndo(); + } + } + } + Cancel(); + rReq.Ignore(); + } + break; + + case SID_ATTRIBUTES_LINE: // BASIC + { + SetCurrentFunction( FuLine::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + if (rReq.GetArgs()) + Cancel(); + } + break; + + case SID_ATTRIBUTES_AREA: // BASIC + { + SetCurrentFunction( FuArea::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + if (rReq.GetArgs()) + Cancel(); + } + break; + + case SID_ATTR_TRANSFORM: + { + SetCurrentFunction( FuTransform::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + if (rReq.GetArgs()) + { + Invalidate(SID_RULER_OBJECT); + Cancel(); + } + } + break; + + case SID_CHAR_DLG_EFFECT: + case SID_CHAR_DLG: // BASIC + { + SetCurrentFunction( FuChar::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case SID_PARA_DLG: + { + SetCurrentFunction( FuParagraph::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case FN_NUM_BULLET_ON: + { + // The value (sal_uInt16)0xFFFF means set bullet on/off. + SfxUInt16Item aItem(FN_SVX_SET_BULLET, sal_uInt16(0xFFFF)); + GetViewFrame()->GetDispatcher()->ExecuteList(FN_SVX_SET_BULLET, + SfxCallMode::RECORD, { &aItem }); + } + break; + + case FN_NUM_NUMBERING_ON: + { + // The value (sal_uInt16)0xFFFF means set bullet on/off. + SfxUInt16Item aItem(FN_SVX_SET_NUMBER, sal_uInt16(0xFFFF)); + GetViewFrame()->GetDispatcher()->ExecuteList(FN_SVX_SET_NUMBER, + SfxCallMode::RECORD, { &aItem }); + } + break; + + case SID_OUTLINE_BULLET: + case FN_SVX_SET_BULLET: + case FN_SVX_SET_NUMBER: + { + SetCurrentFunction( FuBulletAndPosition::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case FN_INSERT_SOFT_HYPHEN: + case FN_INSERT_HARDHYPHEN: + case FN_INSERT_HARD_SPACE: + case FN_INSERT_NNBSP: + case SID_INSERT_RLM : + case SID_INSERT_LRM : + case SID_INSERT_ZWNBSP : + case SID_INSERT_ZWSP: + case SID_CHARMAP: + { + SetCurrentFunction( FuBullet::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case SID_PRESENTATION_LAYOUT: + { + SetCurrentFunction( FuPresentationLayout::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq) ); + Cancel(); + } + break; + + case SID_PASTE_SPECIAL: + { + SetCurrentFunction( FuInsertClipboard::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_CHANGE_PICTURE: + case SID_INSERT_GRAPHIC: + { + SetCurrentFunction( FuInsertGraphic::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, + nSId == SID_CHANGE_PICTURE ) ); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_INSERT_AVMEDIA: + { + SetCurrentFunction( FuInsertAVMedia::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_INSERT_OBJECT: + case SID_INSERT_FLOATINGFRAME: + case SID_INSERT_MATH: + case SID_INSERT_DIAGRAM: + case SID_ATTR_TABLE: + { + SetCurrentFunction( FuInsertOLE::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + // Set the selection tool as the old one. This in particular important for the + // zoom function, in which clicking without dragging zooms as well, and that + // makes exiting the object editing mode impossible. + if (dynamic_cast<FuSelection*>( GetOldFunction().get() ) == nullptr) + SetOldFunction( FuSelection::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + rReq.Ignore (); + } + break; + case SID_CLASSIFICATION_APPLY: + { + const SfxItemSet* pArgs = rReq.GetArgs(); + const SfxPoolItem* pItem = nullptr; + if (pArgs && pArgs->GetItemState(nSId, false, &pItem) == SfxItemState::SET) + { + const OUString& rName = static_cast<const SfxStringItem*>(pItem)->GetValue(); + auto eType = SfxClassificationPolicyType::IntellectualProperty; + if (pArgs->GetItemState(SID_TYPE_NAME, false, &pItem) == SfxItemState::SET) + { + const OUString& rType = static_cast<const SfxStringItem*>(pItem)->GetValue(); + eType = SfxClassificationHelper::stringToPolicyType(rType); + } + if (SfxViewFrame* pViewFrame = GetViewFrame()) + { + if (SfxObjectShell* pObjectShell = pViewFrame->GetObjectShell()) + { + SfxClassificationHelper aHelper(pObjectShell->getDocProperties()); + aHelper.SetBACName(rName, eType); + } + } + } + else + SAL_WARN("sd.ui", "missing parameter for SID_CLASSIFICATION_APPLY"); + + Cancel(); + rReq.Ignore(); + } + break; + + case SID_CLASSIFICATION_DIALOG: + { + auto xDialog = std::make_shared<svx::ClassificationDialog>(GetFrameWeld(), false, [](){} ); + ClassificationCollector aCollector(*this); + aCollector.collect(); + + xDialog->setupValues(aCollector.getResults()); + + if (RET_OK == xDialog->run()) + { + ClassificationInserter aInserter(*this); + aInserter.insert(xDialog->getResult()); + } + xDialog.reset(); + + Cancel(); + rReq.Ignore(); + } + break; + + case SID_COPYOBJECTS: + { + if ( mpDrawView->IsPresObjSelected(false) ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + + SetCurrentFunction( FuCopy::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + } + Cancel(); + rReq.Ignore (); + } + break; + + case SID_INSERTFILE: // BASIC + { + Broadcast (ViewShellHint(ViewShellHint::HINT_COMPLEX_MODEL_CHANGE_START)); + SetCurrentFunction( FuInsertFile::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Broadcast (ViewShellHint(ViewShellHint::HINT_COMPLEX_MODEL_CHANGE_END)); + Cancel(); + rReq.Done (); + } + break; + + case SID_SELECT_BACKGROUND: + case SID_SAVE_BACKGROUND: + case SID_ATTR_PAGE_SIZE: + case SID_ATTR_PAGE: + case SID_PAGESETUP: // BASIC ?? + { + SetCurrentFunction( FuPage::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + rReq.Ignore (); // we generate independent macros !! + } + break; + + case SID_BEFORE_OBJ: + case SID_BEHIND_OBJ: + { + SetCurrentFunction( FuDisplayOrder::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq) ); + rReq.Done(); + // finishes itself, no Cancel() needed! + } + break; + + case SID_REVERSE_ORDER: // BASIC + { + mpDrawView->ReverseOrderOfMarked(); + Cancel(); + rReq.Done (); + } + break; + + case SID_ANIMATION_EFFECTS: + { + SetCurrentFunction( FuObjectAnimationParameters::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq) ); + Cancel(); + } + break; + + case SID_EXECUTE_ANIMATION_EFFECT: + { + SetCurrentFunction(FuExecuteInteraction::Create(this, GetActiveWindow(), + mpDrawView.get(), GetDoc(), rReq)); + Cancel(); + } + break; + + case SID_LINEEND_POLYGON: + { + SetCurrentFunction( FuLineEnd::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case SID_CAPTUREPOINT: + // negative value to signal call from menu + maMousePos = Point(-1,-1); + [[fallthrough]]; + case SID_SET_SNAPITEM: + { + SetCurrentFunction( FuSnapLine::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq) ); + Cancel(); + } + break; + + case SID_MANAGE_LINKS: + { + SetCurrentFunction( FuLink::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_THESAURUS: + { + SetCurrentFunction( FuThesaurus::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_TEXTATTR_DLG: + { + if (mpDrawView->IsTextEdit()) + mpDrawView->SdrEndTextEdit(); + SetCurrentFunction( FuTextAttrDlg::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_MEASURE_DLG: + { + SetCurrentFunction( FuMeasureDlg::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_CONNECTION_DLG: + { + SetCurrentFunction( FuConnectionDlg::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + rReq.Done(); + } + break; + + case SID_CONNECTION_NEW_ROUTING: + { + SfxItemSet aDefAttr( GetPool(), svl::Items<SDRATTR_EDGELINE1DELTA, SDRATTR_EDGELINE3DELTA>{} ); + GetView()->SetAttributes( aDefAttr, true ); // (ReplaceAll) + + Cancel(); + rReq.Done(); + } + break; + + case SID_TWAIN_SELECT: + { + if( mxScannerManager.is() ) + { + try + { + const css::uno::Sequence< css::scanner::ScannerContext > + aContexts( mxScannerManager->getAvailableScanners() ); + + if( aContexts.hasElements() ) + { + css::scanner::ScannerContext aContext( aContexts.getConstArray()[ 0 ] ); + + Reference<lang::XInitialization> xInit(mxScannerManager, UNO_QUERY); + if (xInit.is()) + { + // initialize dialog + weld::Window* pWindow = rReq.GetFrameWeld(); + uno::Sequence<uno::Any> aSeq(comphelper::InitAnyPropertySequence( + { + {"ParentWindow", pWindow ? uno::Any(pWindow->GetXWindow()) : uno::Any(Reference<awt::XWindow>())} + })); + xInit->initialize( aSeq ); + } + + mxScannerManager->configureScannerAndScan( aContext, mxScannerListener ); + } + } + catch(...) + { + } + } + + Cancel(); + rReq.Done(); + } + break; + + case SID_TWAIN_TRANSFER: + { + bool bDone = false; + + if( mxScannerManager.is() ) + { + try + { + const css::uno::Sequence< css::scanner::ScannerContext > aContexts( mxScannerManager->getAvailableScanners() ); + + if( aContexts.hasElements() ) + { + mxScannerManager->startScan( aContexts.getConstArray()[ 0 ], mxScannerListener ); + bDone = true; + } + } + catch( ... ) + { + } + } + + if( !bDone ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, +#ifndef UNX + SdResId(STR_TWAIN_NO_SOURCE) +#else + SdResId(STR_TWAIN_NO_SOURCE_UNX) +#endif + )); + xInfoBox->run(); + + } + else + { + SfxBindings& rBindings = GetViewFrame()->GetBindings(); + rBindings.Invalidate( SID_TWAIN_SELECT ); + rBindings.Invalidate( SID_TWAIN_TRANSFER ); + } + + Cancel(); + rReq.Done(); + } + break; + + case SID_POLYGON_MORPHING: + { + SetCurrentFunction( FuMorph::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case SID_INSERTLAYER: + { + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + + SdrLayerAdmin& rLayerAdmin = GetDoc()->GetLayerAdmin(); + sal_uInt16 nLayerCnt = rLayerAdmin.GetLayerCount(); + sal_uInt16 nLayer = nLayerCnt - 2 + 1; + OUString aLayerName = SdResId(STR_LAYER) + OUString::number(nLayer); + OUString aLayerTitle, aLayerDesc; + bool bIsVisible = false; + bool bIsLocked = false; + bool bIsPrintable = false; + + const SfxItemSet* pArgs = rReq.GetArgs(); + + if (! pArgs) + { + SfxItemSet aNewAttr( GetDoc()->GetPool(), svl::Items<ATTR_LAYER_START, ATTR_LAYER_END>{} ); + + aNewAttr.Put( makeSdAttrLayerName( aLayerName ) ); + aNewAttr.Put( makeSdAttrLayerTitle() ); + aNewAttr.Put( makeSdAttrLayerDesc() ); + aNewAttr.Put( makeSdAttrLayerVisible() ); + aNewAttr.Put( makeSdAttrLayerPrintable() ); + aNewAttr.Put( makeSdAttrLayerLocked() ); + aNewAttr.Put( makeSdAttrLayerThisPage() ); + + SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create(); + vcl::Window* pWin = GetActiveWindow(); + ScopedVclPtr<AbstractSdInsertLayerDlg> pDlg( pFact->CreateSdInsertLayerDlg(pWin ? pWin->GetFrameWeld() : nullptr, aNewAttr, true, SdResId(STR_INSERTLAYER)) ); + pDlg->SetHelpId( SD_MOD()->GetSlotPool()->GetSlot( SID_INSERTLAYER )->GetCommand() ); + + // test for already existing names + bool bLoop = true; + while( bLoop && pDlg->Execute() == RET_OK ) + { + pDlg->GetAttr( aNewAttr ); + aLayerName = static_cast<const SfxStringItem &>( aNewAttr.Get (ATTR_LAYER_NAME)).GetValue (); + + if( rLayerAdmin.GetLayer( aLayerName ) + || aLayerName.isEmpty() + || LayerTabBar::IsLocalizedNameOfStandardLayer( aLayerName) ) + { + // name already exists + std::unique_ptr<weld::MessageDialog> xWarn(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Warning, VclButtonsType::Ok, + SdResId(STR_WARN_NAME_DUPLICATE))); + xWarn->run(); + } + else + bLoop = false; + } + if( bLoop ) // was canceled + { + pDlg.disposeAndClear(); + Cancel(); + rReq.Ignore (); + break; + } + else + { + aLayerTitle = static_cast<const SfxStringItem &>( aNewAttr.Get (ATTR_LAYER_TITLE)).GetValue (); + aLayerDesc = static_cast<const SfxStringItem &>( aNewAttr.Get (ATTR_LAYER_DESC)).GetValue (); + bIsVisible = static_cast<const SfxBoolItem &>( aNewAttr.Get (ATTR_LAYER_VISIBLE)).GetValue (); + bIsLocked = static_cast<const SfxBoolItem &>( aNewAttr.Get (ATTR_LAYER_LOCKED)).GetValue () ; + bIsPrintable = static_cast<const SfxBoolItem &>( aNewAttr.Get (ATTR_LAYER_PRINTABLE)).GetValue () ; + } + } + else if (pArgs->Count () != 4) + { +#if HAVE_FEATURE_SCRIPTING + StarBASIC::FatalError (ERRCODE_BASIC_WRONG_ARGS); +#endif + Cancel(); + rReq.Ignore (); + break; + } + else + { + const SfxStringItem* pLayerName = rReq.GetArg<SfxStringItem>(ID_VAL_LAYERNAME); + const SfxBoolItem* pIsVisible = rReq.GetArg<SfxBoolItem>(ID_VAL_ISVISIBLE); + const SfxBoolItem* pIsLocked = rReq.GetArg<SfxBoolItem>(ID_VAL_ISLOCKED); + const SfxBoolItem* pIsPrintable = rReq.GetArg<SfxBoolItem>(ID_VAL_ISPRINTABLE); + + aLayerName = pLayerName->GetValue (); + bIsVisible = pIsVisible->GetValue (); + bIsLocked = pIsLocked->GetValue (); + bIsPrintable = pIsPrintable->GetValue (); + } + + OUString aPrevLayer = mpDrawView->GetActiveLayer(); + SdrLayer* pLayer; + sal_uInt16 nPrevLayer = 0; + nLayerCnt = rLayerAdmin.GetLayerCount(); + + for ( nLayer = 0; nLayer < nLayerCnt; nLayer++ ) + { + pLayer = rLayerAdmin.GetLayer(nLayer); + OUString aName = pLayer->GetName(); + + if ( aPrevLayer == aName ) + { + nPrevLayer = std::max(nLayer, sal_uInt16(4)); + } + } + + mpDrawView->InsertNewLayer(aLayerName, nPrevLayer + 1); + pLayer = rLayerAdmin.GetLayer(aLayerName); + if( pLayer ) + { + pLayer->SetTitle( aLayerTitle ); + pLayer->SetDescription( aLayerDesc ); + } + + mpDrawView->SetLayerVisible( aLayerName, bIsVisible ); + mpDrawView->SetLayerLocked( aLayerName, bIsLocked); + mpDrawView->SetLayerPrintable(aLayerName, bIsPrintable); + + mpDrawView->SetActiveLayer(aLayerName); + + ResetActualLayer(); + + GetDoc()->SetChanged(); + + GetViewFrame()->GetDispatcher()->Execute(SID_SWITCHLAYER, + SfxCallMode::ASYNCHRON | SfxCallMode::RECORD); + + Cancel(); + rReq.Done (); + } + break; + + case SID_MODIFYLAYER: + { + if(!GetLayerTabControl()) // #i87182# + { + OSL_ENSURE(false, "No LayerTabBar (!)"); + Cancel(); + rReq.Ignore(); + break; + } + + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + + SdrLayerAdmin& rLayerAdmin = GetDoc()->GetLayerAdmin(); + sal_uInt16 nCurPage = GetLayerTabControl()->GetCurPageId(); + OUString aLayerName = GetLayerTabControl()->GetLayerName(nCurPage); + SdrLayer* pLayer = rLayerAdmin.GetLayer(aLayerName); + + OUString aLayerTitle = pLayer->GetTitle(); + OUString aLayerDesc = pLayer->GetDescription(); + + OUString aOldLayerName(aLayerName); + OUString aOldLayerTitle(aLayerTitle); + OUString aOldLayerDesc(aLayerDesc); + + bool bIsVisible, bIsLocked, bIsPrintable; + bool bOldIsVisible = bIsVisible = mpDrawView->IsLayerVisible(aLayerName); + bool bOldIsLocked = bIsLocked = mpDrawView->IsLayerLocked(aLayerName); + bool bOldIsPrintable = bIsPrintable = mpDrawView->IsLayerPrintable(aLayerName); + + const SfxItemSet* pArgs = rReq.GetArgs(); + // is it allowed to delete the layer? + bool bDelete = !( LayerTabBar::IsRealNameOfStandardLayer(aLayerName) ); + + if (! pArgs) + { + SfxItemSet aNewAttr( GetDoc()->GetPool(), svl::Items<ATTR_LAYER_START, ATTR_LAYER_END>{} ); + + aNewAttr.Put( makeSdAttrLayerName( aLayerName ) ); + aNewAttr.Put( makeSdAttrLayerTitle( aLayerTitle ) ); + aNewAttr.Put( makeSdAttrLayerDesc( aLayerDesc ) ); + aNewAttr.Put( makeSdAttrLayerVisible( bIsVisible ) ); + aNewAttr.Put( makeSdAttrLayerLocked( bIsLocked ) ); + aNewAttr.Put( makeSdAttrLayerPrintable( bIsPrintable ) ); + aNewAttr.Put( makeSdAttrLayerThisPage() ); + + SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create(); + vcl::Window* pWin = GetActiveWindow(); + ScopedVclPtr<AbstractSdInsertLayerDlg> pDlg( pFact->CreateSdInsertLayerDlg(pWin ? pWin->GetFrameWeld() : nullptr, aNewAttr, bDelete, SdResId(STR_MODIFYLAYER)) ); + pDlg->SetHelpId( SD_MOD()->GetSlotPool()->GetSlot( SID_MODIFYLAYER )->GetCommand() ); + + // test for already existing names + bool bLoop = true; + sal_uInt16 nRet = 0; + while( bLoop ) + { + nRet = pDlg->Execute(); + if (nRet != RET_OK) + break; + pDlg->GetAttr( aNewAttr ); + aLayerName = static_cast<const SfxStringItem &>( aNewAttr.Get (ATTR_LAYER_NAME)).GetValue (); + if (bDelete) + { + if( (rLayerAdmin.GetLayer( aLayerName ) && aLayerName != aOldLayerName) + || LayerTabBar::IsRealNameOfStandardLayer(aLayerName) + || LayerTabBar::IsLocalizedNameOfStandardLayer(aLayerName) + || aLayerName.isEmpty() ) + { + // name already exists + std::unique_ptr<weld::MessageDialog> xWarn(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Warning, VclButtonsType::Ok, + SdResId(STR_WARN_NAME_DUPLICATE))); + xWarn->run(); + } + else + bLoop = false; + } + else + bLoop = false; // altering name is already disabled in the dialog itself + } + switch (nRet) + { + case RET_OK : + aLayerTitle = static_cast<const SfxStringItem &>( aNewAttr.Get (ATTR_LAYER_TITLE)).GetValue (); + aLayerDesc = static_cast<const SfxStringItem &>( aNewAttr.Get (ATTR_LAYER_DESC)).GetValue (); + bIsVisible = static_cast<const SfxBoolItem &>( aNewAttr.Get (ATTR_LAYER_VISIBLE)).GetValue (); + bIsLocked = static_cast<const SfxBoolItem &>( aNewAttr.Get (ATTR_LAYER_LOCKED)).GetValue (); + bIsPrintable = static_cast<const SfxBoolItem &>( aNewAttr.Get (ATTR_LAYER_PRINTABLE)).GetValue (); + break; + + default : + pDlg.disposeAndClear(); + rReq.Ignore (); + Cancel (); + return; + } + } + else if (pArgs->Count () == 4) + { + const SfxStringItem* pLayerName = rReq.GetArg<SfxStringItem>(ID_VAL_LAYERNAME); + const SfxBoolItem* pIsVisible = rReq.GetArg<SfxBoolItem>(ID_VAL_ISVISIBLE); + const SfxBoolItem* pIsLocked = rReq.GetArg<SfxBoolItem>(ID_VAL_ISLOCKED); + const SfxBoolItem* pIsPrintable = rReq.GetArg<SfxBoolItem>(ID_VAL_ISPRINTABLE); + + aLayerName = pLayerName->GetValue (); + bIsVisible = pIsVisible->GetValue (); + bIsLocked = pIsLocked->GetValue (); + bIsPrintable = pIsPrintable->GetValue (); + } + else + { +#if HAVE_FEATURE_SCRIPTING + StarBASIC::FatalError (ERRCODE_BASIC_WRONG_ARGS); +#endif + Cancel (); + rReq.Ignore (); + break; + } + + SfxUndoManager* pManager = GetDoc()->GetDocSh()->GetUndoManager(); + std::unique_ptr<SdLayerModifyUndoAction> pAction( new SdLayerModifyUndoAction( + GetDoc(), + pLayer, + // old values + aOldLayerName, + aOldLayerTitle, + aOldLayerDesc, + bOldIsVisible, + bOldIsLocked, + bOldIsPrintable, + // new values + aLayerName, + aLayerTitle, + aLayerDesc, + bIsVisible, + bIsLocked, + bIsPrintable + ) ); + pManager->AddUndoAction( std::move(pAction) ); + + ModifyLayer( pLayer, aLayerName, aLayerTitle, aLayerDesc, bIsVisible, bIsLocked, bIsPrintable ); + + Cancel(); + rReq.Done (); + } + break; + + case SID_RENAMELAYER: + { + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + + if(GetLayerTabControl()) // #i87182# + { + GetLayerTabControl()->StartEditMode(GetLayerTabControl()->GetCurPageId()); + } + else + { + OSL_ENSURE(false, "No LayerTabBar (!)"); + } + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_EDIT_HYPERLINK : + { + // Ensure the field is selected first + OutlinerView* pOutView = mpDrawView->GetTextEditOutlinerView(); + if (pOutView) + pOutView->SelectFieldAtCursor(); + + GetViewFrame()->GetDispatcher()->Execute( SID_HYPERLINK_DIALOG ); + + Cancel(); + rReq.Done (); + } + break; + + case SID_OPEN_HYPERLINK: + { + OutlinerView* pOutView = mpDrawView->GetTextEditOutlinerView(); + if ( pOutView ) + { + const SvxFieldData* pField = pOutView->GetFieldAtCursor(); + if( auto pURLField = dynamic_cast< const SvxURLField *>( pField ) ) + { + SfxStringItem aUrl( SID_FILE_NAME, pURLField->GetURL() ); + SfxStringItem aTarget( SID_TARGETNAME, pURLField->GetTargetFrame() ); + + OUString aReferName; + SfxViewFrame* pFrame = GetViewFrame(); + SfxMedium* pMed = pFrame->GetObjectShell()->GetMedium(); + if (pMed) + aReferName = pMed->GetName(); + + SfxFrameItem aFrm( SID_DOCFRAME, pFrame ); + SfxStringItem aReferer( SID_REFERER, aReferName ); + + SfxBoolItem aNewView( SID_OPEN_NEW_VIEW, false ); + SfxBoolItem aBrowsing( SID_BROWSE, true ); + + SfxViewFrame* pViewFrm = SfxViewFrame::Current(); + if (pViewFrm) + { + pViewFrm->GetDispatcher()->ExecuteList(SID_OPENDOC, + SfxCallMode::ASYNCHRON | SfxCallMode::RECORD, + { &aUrl, &aTarget, &aFrm, &aReferer, + &aNewView, &aBrowsing }); + } + } + } + Cancel(); + rReq.Done (); + } + break; + + case SID_COPY_HYPERLINK_LOCATION: + { + OutlinerView* pOutView = mpDrawView->GetTextEditOutlinerView(); + if ( pOutView ) + { + const SvxFieldData* pField = pOutView->GetFieldAtCursor(); + if (const SvxURLField* pURLField = dynamic_cast<const SvxURLField*>(pField)) + { + uno::Reference<datatransfer::clipboard::XClipboard> xClipboard + = pOutView->GetWindow()->GetClipboard(); + vcl::unohelper::TextDataObject::CopyStringTo(pURLField->GetURL(), xClipboard); + } + } + + Cancel(); + rReq.Done (); + } + break; + + case SID_HYPERLINK_SETLINK: + { + const SfxItemSet* pReqArgs = rReq.GetArgs(); + + if (pReqArgs) + { + const SvxHyperlinkItem* pHLItem = + &pReqArgs->Get(SID_HYPERLINK_SETLINK); + + if (pHLItem->GetInsertMode() == HLINK_FIELD) + { + InsertURLField(pHLItem->GetURL(), pHLItem->GetName(), + pHLItem->GetTargetFrame()); + } + else if (pHLItem->GetInsertMode() == HLINK_BUTTON) + { + InsertURLButton(pHLItem->GetURL(), pHLItem->GetName(), + pHLItem->GetTargetFrame(), nullptr); + } + else if (pHLItem->GetInsertMode() == HLINK_DEFAULT) + { + OutlinerView* pOlView = mpDrawView->GetTextEditOutlinerView(); + + if (pOlView) + { + InsertURLField(pHLItem->GetURL(), pHLItem->GetName(), + pHLItem->GetTargetFrame()); + } + else + { + InsertURLButton(pHLItem->GetURL(), pHLItem->GetName(), + pHLItem->GetTargetFrame(), nullptr); + } + } + } + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_HIDE_LAST_LEVEL: + { + ESelection aSel; + // fdo#78151 editing a PresObjKind::Outline in a master page ? + ::Outliner* pOL = GetOutlinerForMasterPageOutlineTextObj(aSel); + if (pOL) + { + //we are on the last paragraph + aSel.Adjust(); + if (aSel.nEndPara == pOL->GetParagraphCount() - 1) + { + sal_uInt16 nDepth = pOL->GetDepth(aSel.nEndPara); + //there exists a previous numbering level + if (nDepth != sal_uInt16(-1) && nDepth > 0) + { + Paragraph* pPara = pOL->GetParagraph(aSel.nEndPara); + pOL->Remove(pPara, 1); + } + } + } + Cancel(); + rReq.Done (); + } + break; + + case SID_SHOW_NEXT_LEVEL: + { + const char* const STR_PRESOBJ_MPOUTLINE_ARY[] + { + STR_PRESOBJ_MPOUTLINE, + STR_PRESOBJ_MPOUTLLAYER2, + STR_PRESOBJ_MPOUTLLAYER3, + STR_PRESOBJ_MPOUTLLAYER4, + STR_PRESOBJ_MPOUTLLAYER5, + STR_PRESOBJ_MPOUTLLAYER6, + STR_PRESOBJ_MPOUTLLAYER7, + STR_PRESOBJ_MPNOTESTITLE, + STR_PRESOBJ_MPNOTESTEXT, + STR_PRESOBJ_NOTESTEXT + }; + + ESelection aSel; + // fdo#78151 editing a PresObjKind::Outline in a master page ? + ::Outliner* pOL = GetOutlinerForMasterPageOutlineTextObj(aSel); + if (pOL) + { + //we are on the last paragraph + aSel.Adjust(); + if (aSel.nEndPara == pOL->GetParagraphCount() - 1) + { + sal_uInt16 nDepth = pOL->GetDepth(aSel.nEndPara); + //there exists a previous numbering level + if (nDepth < 8) + { + sal_uInt16 nNewDepth = nDepth+1; + pOL->Insert(SdResId(STR_PRESOBJ_MPOUTLINE_ARY[nNewDepth]), EE_PARA_APPEND, nNewDepth); + } + } + } + Cancel(); + rReq.Done (); + } + break; + + case SID_INSERT_FLD_DATE_FIX: + case SID_INSERT_FLD_DATE_VAR: + case SID_INSERT_FLD_TIME_FIX: + case SID_INSERT_FLD_TIME_VAR: + case SID_INSERT_FLD_AUTHOR: + case SID_INSERT_FLD_PAGE: + case SID_INSERT_FLD_PAGE_TITLE: + case SID_INSERT_FLD_PAGES: + case SID_INSERT_FLD_FILE: + { + sal_uInt16 nMul = 1; + std::unique_ptr<SvxFieldItem> pFieldItem; + + switch( nSId ) + { + case SID_INSERT_FLD_DATE_FIX: + pFieldItem.reset(new SvxFieldItem( + SvxDateField( Date( Date::SYSTEM ), SvxDateType::Fix ), EE_FEATURE_FIELD )); + break; + + case SID_INSERT_FLD_DATE_VAR: + pFieldItem.reset(new SvxFieldItem( SvxDateField(), EE_FEATURE_FIELD )); + break; + + case SID_INSERT_FLD_TIME_FIX: + pFieldItem.reset(new SvxFieldItem( + SvxExtTimeField( ::tools::Time( ::tools::Time::SYSTEM ), SvxTimeType::Fix ), EE_FEATURE_FIELD )); + break; + + case SID_INSERT_FLD_TIME_VAR: + pFieldItem.reset(new SvxFieldItem( SvxExtTimeField(), EE_FEATURE_FIELD )); + break; + + case SID_INSERT_FLD_AUTHOR: + { + SvtUserOptions aUserOptions; + pFieldItem.reset(new SvxFieldItem( + SvxAuthorField( + aUserOptions.GetFirstName(), aUserOptions.GetLastName(), aUserOptions.GetID() ), EE_FEATURE_FIELD )); + } + break; + + case SID_INSERT_FLD_PAGE: + { + pFieldItem.reset(new SvxFieldItem( SvxPageField(), EE_FEATURE_FIELD )); + nMul = 3; + } + break; + + case SID_INSERT_FLD_PAGE_TITLE: + { + pFieldItem.reset(new SvxFieldItem( SvxPageTitleField(), EE_FEATURE_FIELD)); + nMul = 3; + } + break; + + case SID_INSERT_FLD_PAGES: + { + pFieldItem.reset(new SvxFieldItem( SvxPagesField(), EE_FEATURE_FIELD )); + nMul = 3; + } + break; + + case SID_INSERT_FLD_FILE: + { + OUString aName; + if( GetDocSh()->HasName() ) + aName = GetDocSh()->GetMedium()->GetName(); + pFieldItem.reset(new SvxFieldItem( SvxExtFileField( aName ), EE_FEATURE_FIELD )); + } + break; + } + + OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView(); + + if( pOLV ) + { + const SvxFieldItem* pOldFldItem = pOLV->GetFieldAtSelection(); + + if( pOldFldItem && ( nullptr != dynamic_cast< const SvxURLField *>( pOldFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxDateField *>( pOldFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxTimeField *>( pOldFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxExtTimeField *>( pOldFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxExtFileField *>( pOldFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxAuthorField *>( pOldFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxPageField *>( pOldFldItem->GetField() ) ) ) + { + // select field, then it will be deleted when inserting + ESelection aSel = pOLV->GetSelection(); + if( aSel.nStartPos == aSel.nEndPos ) + aSel.nEndPos++; + pOLV->SetSelection( aSel ); + } + + if( pFieldItem ) + pOLV->InsertField( *pFieldItem ); + } + else + { + Outliner* pOutl = GetDoc()->GetInternalOutliner(); + pOutl->Init( OutlinerMode::TextObject ); + OutlinerMode nOutlMode = pOutl->GetMode(); + pOutl->SetStyleSheet( 0, nullptr ); + pOutl->QuickInsertField( *pFieldItem, ESelection() ); + std::unique_ptr<OutlinerParaObject> pOutlParaObject = pOutl->CreateParaObject(); + + SdrRectObj* pRectObj = new SdrRectObj( + *GetDoc(), + OBJ_TEXT); + pRectObj->SetMergedItem(makeSdrTextAutoGrowWidthItem(true)); + + pOutl->UpdateFields(); + pOutl->SetUpdateMode( true ); + Size aSize( pOutl->CalcTextSize() ); + aSize.setWidth( aSize.Width() * nMul ); + pOutl->SetUpdateMode( false ); + + Point aPos; + ::tools::Rectangle aRect( aPos, GetActiveWindow()->GetOutputSizePixel() ); + aPos = aRect.Center(); + aPos = GetActiveWindow()->PixelToLogic(aPos); + aPos.AdjustX( -(aSize.Width() / 2) ); + aPos.AdjustY( -(aSize.Height() / 2) ); + + ::tools::Rectangle aLogicRect(aPos, aSize); + pRectObj->SetLogicRect(aLogicRect); + pRectObj->SetOutlinerParaObject( std::move(pOutlParaObject) ); + mpDrawView->InsertObjectAtView(pRectObj, *mpDrawView->GetSdrPageView()); + pOutl->Init( nOutlMode ); + } + + pFieldItem.reset(); + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_MODIFY_FIELD: + { + OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView(); + + if( pOLV ) + { + const SvxFieldItem* pFldItem = pOLV->GetFieldAtSelection(); + + if( pFldItem && (nullptr != dynamic_cast< const SvxDateField *>( pFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxAuthorField *>( pFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxExtFileField *>( pFldItem->GetField() ) || + nullptr != dynamic_cast< const SvxExtTimeField *>( pFldItem->GetField() ) ) ) + { + // Dialog... + SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create(); + vcl::Window* pWin = GetActiveWindow(); + ScopedVclPtr<AbstractSdModifyFieldDlg> pDlg( pFact->CreateSdModifyFieldDlg(pWin ? pWin->GetFrameWeld() : nullptr, pFldItem->GetField(), pOLV->GetAttribs() ) ); + if( pDlg->Execute() == RET_OK ) + { + // To make a correct SetAttribs() call at the utlinerView + // it is necessary to split the actions here + std::unique_ptr<SvxFieldData> pField(pDlg->GetField()); + ESelection aSel = pOLV->GetSelection(); + bool bSelectionWasModified(false); + + if( pField ) + { + SvxFieldItem aFieldItem( *pField, EE_FEATURE_FIELD ); + + if( aSel.nStartPos == aSel.nEndPos ) + { + bSelectionWasModified = true; + aSel.nEndPos++; + pOLV->SetSelection( aSel ); + } + + pOLV->InsertField( aFieldItem ); + + // select again for eventual SetAttribs call + pOLV->SetSelection( aSel ); + } + + SfxItemSet aSet( pDlg->GetItemSet() ); + + if( aSet.Count() ) + { + pOLV->SetAttribs( aSet ); + + ::Outliner* pOutliner = pOLV->GetOutliner(); + if( pOutliner ) + pOutliner->UpdateFields(); + } + + if(pField) + { + // restore selection to original + if(bSelectionWasModified) + { + aSel.nEndPos--; + pOLV->SetSelection( aSel ); + } + } + } + } + } + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_OPEN_XML_FILTERSETTINGS: + { + try + { + css::uno::Reference < css::ui::dialogs::XExecutableDialog > xDialog = css::ui::dialogs::XSLTFilterDialog::create( ::comphelper::getProcessComponentContext() ); + xDialog->execute(); + } + catch( css::uno::RuntimeException& ) + { + DBG_UNHANDLED_EXCEPTION("sd.view"); + } + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_GROUP: // BASIC + { + if ( mpDrawView->IsPresObjSelected( true, true, true ) ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + mpDrawView->GroupMarked(); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_UNGROUP: // BASIC + { + mpDrawView->UnGroupMarked(); + Cancel(); + rReq.Done (); + } + break; + + case SID_NAME_GROUP: + { + // only allow for single object selection since the name of an object needs + // to be unique + if(1 == mpDrawView->GetMarkedObjectCount()) + { + // #i68101# + SdrObject* pSelected = mpDrawView->GetMarkedObjectByIndex(0); + OSL_ENSURE(pSelected, "DrawViewShell::FuTemp03: nMarkCount, but no object (!)"); + OUString aName(pSelected->GetName()); + + SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create(); + ScopedVclPtr<AbstractSvxObjectNameDialog> pDlg(pFact->CreateSvxObjectNameDialog(GetFrameWeld(), aName)); + + pDlg->SetCheckNameHdl(LINK(this, DrawViewShell, NameObjectHdl)); + + if(RET_OK == pDlg->Execute()) + { + pDlg->GetName(aName); + pSelected->SetName(aName); + + SdPage* pPage = GetActualPage(); + if (pPage) + pPage->notifyObjectRenamed(pSelected); + } + } + + SfxBindings& rBindings = GetViewFrame()->GetBindings(); + rBindings.Invalidate( SID_NAVIGATOR_STATE, true ); + rBindings.Invalidate( SID_CONTEXT ); + + Cancel(); + rReq.Ignore(); + break; + } + + // #i68101# + case SID_OBJECT_TITLE_DESCRIPTION: + { + if(1 == mpDrawView->GetMarkedObjectCount()) + { + SdrObject* pSelected = mpDrawView->GetMarkedObjectByIndex(0); + OSL_ENSURE(pSelected, "DrawViewShell::FuTemp03: nMarkCount, but no object (!)"); + OUString aTitle(pSelected->GetTitle()); + OUString aDescription(pSelected->GetDescription()); + + SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create(); + ScopedVclPtr<AbstractSvxObjectTitleDescDialog> pDlg(pFact->CreateSvxObjectTitleDescDialog( + GetFrameWeld(), aTitle, aDescription)); + + if(RET_OK == pDlg->Execute()) + { + pDlg->GetTitle(aTitle); + pDlg->GetDescription(aDescription); + pSelected->SetTitle(aTitle); + pSelected->SetDescription(aDescription); + } + } + + SfxBindings& rBindings = GetViewFrame()->GetBindings(); + rBindings.Invalidate( SID_NAVIGATOR_STATE, true ); + rBindings.Invalidate( SID_CONTEXT ); + + Cancel(); + rReq.Ignore(); + break; + } + + case SID_ENTER_GROUP: // BASIC + { + mpDrawView->EnterMarkedGroup(); + Cancel(); + rReq.Done (); + } + break; + + case SID_LEAVE_GROUP: // BASIC + { + mpDrawView->LeaveOneGroup(); + Cancel(); + rReq.Done (); + } + break; + + case SID_LEAVE_ALL_GROUPS: // BASIC + { + mpDrawView->LeaveAllGroup(); + Cancel(); + rReq.Done (); + } + break; + + case SID_TEXT_COMBINE: // BASIC + { + // End text edit to avoid conflicts + if(mpDrawView->IsTextEdit()) + mpDrawView->SdrEndTextEdit(); + + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->CombineMarkedTextObjects(); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_COMBINE: // BASIC + { + // End text edit to avoid conflicts + if(mpDrawView->IsTextEdit()) + mpDrawView->SdrEndTextEdit(); + + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->CombineMarkedObjects(false); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_DISTRIBUTE_DLG: + { + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + mpDrawView->DistributeMarkedObjects(GetFrameWeld()); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_POLY_MERGE: + { + // End text edit to avoid conflicts + if(mpDrawView->IsTextEdit()) + mpDrawView->SdrEndTextEdit(); + + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->MergeMarkedObjects(SdrMergeMode::Merge); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_POLY_SUBSTRACT: + { + // End text edit to avoid conflicts + if(mpDrawView->IsTextEdit()) + mpDrawView->SdrEndTextEdit(); + + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->MergeMarkedObjects(SdrMergeMode::Subtract); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_POLY_INTERSECT: + { + // End text edit to avoid conflicts + if(mpDrawView->IsTextEdit()) + mpDrawView->SdrEndTextEdit(); + + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->MergeMarkedObjects(SdrMergeMode::Intersect); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_EQUALIZEWIDTH: + case SID_EQUALIZEHEIGHT: + { + // End text edit to avoid conflicts + if(mpDrawView->IsTextEdit()) + mpDrawView->SdrEndTextEdit(); + + mpDrawView->EqualizeMarkedObjects(nSId == SID_EQUALIZEWIDTH); + Cancel(); + rReq.Done (); + } + break; + + case SID_DISMANTLE: // BASIC + { + if ( mpDrawView->IsDismantlePossible() ) + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->DismantleMarkedObjects(); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_CONNECT: // BASIC + { + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->CombineMarkedObjects(); + } + Cancel(); + rReq.Done (); + } + break; + + case SID_BREAK: // BASIC + { + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + + if ( mpDrawView->IsBreak3DObjPossible() ) + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->Break3DObj(); + } + else if ( mpDrawView->IsDismantlePossible(true) ) + { + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->DismantleMarkedObjects(true); + } + else if ( mpDrawView->IsImportMtfPossible() ) + { + weld::WaitObject aWait(GetFrameWeld()); + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + const size_t nCnt=rMarkList.GetMarkCount(); + + // determine the sum of meta objects of all selected meta files + sal_uLong nCount = 0; + for(size_t nm=0; nm<nCnt; ++nm) + { + SdrMark* pM=rMarkList.GetMark(nm); + SdrObject* pObj=pM->GetMarkedSdrObj(); + SdrGrafObj* pGraf= dynamic_cast< SdrGrafObj *>( pObj ); + SdrOle2Obj* pOle2= dynamic_cast< SdrOle2Obj *>( pObj ); + + if (pGraf != nullptr) + { + if (pGraf->HasGDIMetaFile()) + { + nCount += pGraf->GetGraphic().GetGDIMetaFile().GetActionSize(); + } + else if (pGraf->isEmbeddedVectorGraphicData()) + { + nCount += pGraf->getMetafileFromEmbeddedVectorGraphicData().GetActionSize(); + } + } + + if(pOle2 && pOle2->GetGraphic()) + { + nCount += pOle2->GetGraphic()->GetGDIMetaFile().GetActionSize(); + } + } + + // decide with the sum of all meta objects if we should show a dialog + if(nCount < MIN_ACTIONS_FOR_DIALOG) + { + // nope, no dialog + mpDrawView->DoImportMarkedMtf(); + } + else + { + SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create(); + ScopedVclPtr<VclAbstractDialog> pDlg(pFact->CreateBreakDlg(GetFrameWeld(), mpDrawView.get(), GetDocSh(), nCount, static_cast<sal_uLong>(nCnt) )); + pDlg->Execute(); + } + } + + Cancel(); + rReq.Done (); + } + break; + + case SID_CONVERT_TO_3D: + { + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + if (mpDrawView->IsConvertTo3DObjPossible()) + { + if (mpDrawView->IsTextEdit()) + { + mpDrawView->SdrEndTextEdit(); + } + + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->ConvertMarkedObjTo3D(); + } + } + + Cancel(); + rReq.Done(); + } + break; + + case SID_FRAME_TO_TOP: // BASIC + { + mpDrawView->PutMarkedToTop(); + Cancel(); + rReq.Done (); + } + break; + + case SID_MOREFRONT: // BASIC + case SID_FRAME_UP: // BASIC + { + mpDrawView->MovMarkedToTop(); + Cancel(); + rReq.Done (); + } + break; + + case SID_MOREBACK: // BASIC + case SID_FRAME_DOWN: // BASIC + { + mpDrawView->MovMarkedToBtm(); + Cancel(); + rReq.Done (); + } + break; + + case SID_FRAME_TO_BOTTOM: // BASIC + { + mpDrawView->PutMarkedToBtm(); + Cancel(); + rReq.Done (); + } + break; + + case SID_HORIZONTAL: // BASIC + case SID_FLIP_HORIZONTAL: + { + mpDrawView->MirrorAllMarkedHorizontal(); + Cancel(); + rReq.Done (); + } + break; + + case SID_VERTICAL: // BASIC + case SID_FLIP_VERTICAL: + { + mpDrawView->MirrorAllMarkedVertical(); + Cancel(); + rReq.Done (); + } + break; + + case SID_OBJECT_ALIGN_LEFT: // BASIC + { + mpDrawView->AlignMarkedObjects(SdrHorAlign::Left, SdrVertAlign::NONE); + Cancel(); + rReq.Done (); + } + break; + + case SID_OBJECT_ALIGN_CENTER: // BASIC + { + mpDrawView->AlignMarkedObjects(SdrHorAlign::Center, SdrVertAlign::NONE); + Cancel(); + rReq.Done (); + } + break; + + case SID_OBJECT_ALIGN_RIGHT: // BASIC + { + mpDrawView->AlignMarkedObjects(SdrHorAlign::Right, SdrVertAlign::NONE); + Cancel(); + rReq.Done (); + } + break; + + case SID_OBJECT_ALIGN_UP: // BASIC + { + mpDrawView->AlignMarkedObjects(SdrHorAlign::NONE, SdrVertAlign::Top); + Cancel(); + rReq.Done (); + } + break; + + case SID_OBJECT_ALIGN_MIDDLE: // BASIC + { + mpDrawView->AlignMarkedObjects(SdrHorAlign::NONE, SdrVertAlign::Center); + Cancel(); + rReq.Done (); + } + break; + + case SID_OBJECT_ALIGN_DOWN: // BASIC + { + mpDrawView->AlignMarkedObjects(SdrHorAlign::NONE, SdrVertAlign::Bottom); + Cancel(); + rReq.Done (); + } + break; + + case SID_SELECTALL: // BASIC + { + if( (dynamic_cast<FuSelection*>( GetOldFunction().get() ) != nullptr) && + !GetView()->IsFrameDragSingles() && GetView()->HasMarkablePoints()) + { + if ( !mpDrawView->IsAction() ) + mpDrawView->MarkAllPoints(); + } + else + mpDrawView->SelectAll(); + + Cancel(); + rReq.Done (); + } + break; + + case SID_STYLE_NEW: // BASIC ??? + case SID_STYLE_APPLY: + case SID_STYLE_EDIT: + case SID_STYLE_DELETE: + case SID_STYLE_HIDE: + case SID_STYLE_SHOW: + case SID_STYLE_FAMILY: + case SID_STYLE_WATERCAN: + case SID_STYLE_UPDATE_BY_EXAMPLE: + case SID_STYLE_NEW_BY_EXAMPLE: + { + if( rReq.GetSlot() == SID_STYLE_EDIT && !rReq.GetArgs() ) + { + SfxStyleSheet* pStyleSheet = mpDrawView->GetStyleSheet(); + if( pStyleSheet && pStyleSheet->GetFamily() == SfxStyleFamily::Page) + pStyleSheet = static_cast<SdStyleSheet*>(pStyleSheet)->GetPseudoStyleSheet(); + + if( (pStyleSheet == nullptr) && GetView()->IsTextEdit() ) + { + GetView()->SdrEndTextEdit(); + + pStyleSheet = mpDrawView->GetStyleSheet(); + if(pStyleSheet && pStyleSheet->GetFamily() == SfxStyleFamily::Page) + pStyleSheet = static_cast<SdStyleSheet*>(pStyleSheet)->GetPseudoStyleSheet(); + } + + if( pStyleSheet == nullptr ) + { + rReq.Ignore(); + break; + } + + SfxAllItemSet aSet(GetDoc()->GetPool()); + + SfxStringItem aStyleNameItem( SID_STYLE_EDIT, pStyleSheet->GetName() ); + aSet.Put(aStyleNameItem); + + SfxUInt16Item aStyleFamilyItem( SID_STYLE_FAMILY, static_cast<sal_uInt16>(pStyleSheet->GetFamily()) ); + aSet.Put(aStyleFamilyItem); + + rReq.SetArgs(aSet); + } + + if( rReq.GetArgs() ) + { + SetCurrentFunction( FuTemplate::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + if( rReq.GetSlot() == SID_STYLE_APPLY ) + GetViewFrame()->GetBindings().Invalidate( SID_STYLE_APPLY ); + Cancel(); + } + else if( rReq.GetSlot() == SID_STYLE_APPLY ) + GetViewFrame()->GetDispatcher()->Execute( SID_STYLE_DESIGNER, SfxCallMode::ASYNCHRON ); + rReq.Ignore (); + } + break; + + case SID_IMAP: + { + sal_uInt16 nId = SvxIMapDlgChildWindow::GetChildWindowId(); + + GetViewFrame()->ToggleChildWindow( nId ); + GetViewFrame()->GetBindings().Invalidate( SID_IMAP ); + + if ( GetViewFrame()->HasChildWindow( nId ) + && ( ( ViewShell::Implementation::GetImageMapDialog() ) != nullptr ) ) + { + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + + if ( rMarkList.GetMarkCount() == 1 ) + UpdateIMapDlg( rMarkList.GetMark( 0 )->GetMarkedSdrObj() ); + } + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_GRID_FRONT: + { + mpDrawView->SetGridFront( !mpDrawView->IsGridFront() ); + Cancel(); + rReq.Done (); + } + break; + + case SID_HELPLINES_FRONT: + { + mpDrawView->SetHlplFront( !mpDrawView->IsHlplFront() ); + Cancel(); + rReq.Done (); + } + break; + + case SID_FONTWORK: + { + if ( rReq.GetArgs() ) + { + GetViewFrame()->SetChildWindow(SvxFontWorkChildWindow::GetChildWindowId(), + static_cast<const SfxBoolItem&>(rReq.GetArgs()-> + Get(SID_FONTWORK)).GetValue()); + } + else + { + GetViewFrame()->ToggleChildWindow( SvxFontWorkChildWindow::GetChildWindowId() ); + } + + GetViewFrame()->GetBindings().Invalidate(SID_FONTWORK); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_COLOR_CONTROL: + { + if ( rReq.GetArgs() ) + GetViewFrame()->SetChildWindow(SvxColorChildWindow::GetChildWindowId(), + static_cast<const SfxBoolItem&>(rReq.GetArgs()-> + Get(SID_COLOR_CONTROL)).GetValue()); + else + GetViewFrame()->ToggleChildWindow(SvxColorChildWindow::GetChildWindowId() ); + + GetViewFrame()->GetBindings().Invalidate(SID_COLOR_CONTROL); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_EXTRUSION_TOGGLE: + case SID_EXTRUSION_TILT_DOWN: + case SID_EXTRUSION_TILT_UP: + case SID_EXTRUSION_TILT_LEFT: + case SID_EXTRUSION_TILT_RIGHT: + case SID_EXTRUSION_3D_COLOR: + case SID_EXTRUSION_DEPTH: + case SID_EXTRUSION_DIRECTION: + case SID_EXTRUSION_PROJECTION: + case SID_EXTRUSION_LIGHTING_DIRECTION: + case SID_EXTRUSION_LIGHTING_INTENSITY: + case SID_EXTRUSION_SURFACE: + case SID_EXTRUSION_DEPTH_FLOATER: + case SID_EXTRUSION_DIRECTION_FLOATER: + case SID_EXTRUSION_LIGHTING_FLOATER: + case SID_EXTRUSION_SURFACE_FLOATER: + case SID_EXTRUSION_DEPTH_DIALOG: + svx::ExtrusionBar::execute( mpDrawView.get(), rReq, GetViewFrame()->GetBindings() ); + Cancel(); + rReq.Ignore (); + break; + + case SID_FONTWORK_SHAPE: + case SID_FONTWORK_SHAPE_TYPE: + case SID_FONTWORK_ALIGNMENT: + case SID_FONTWORK_SAME_LETTER_HEIGHTS: + case SID_FONTWORK_CHARACTER_SPACING: + case SID_FONTWORK_KERN_CHARACTER_PAIRS: + case SID_FONTWORK_GALLERY_FLOATER: + case SID_FONTWORK_CHARACTER_SPACING_FLOATER: + case SID_FONTWORK_ALIGNMENT_FLOATER: + case SID_FONTWORK_CHARACTER_SPACING_DIALOG: + svx::FontworkBar::execute(*mpDrawView, rReq, GetViewFrame()->GetBindings()); + Cancel(); + rReq.Ignore (); + break; + + case SID_BMPMASK: + { + GetViewFrame()->ToggleChildWindow( SvxBmpMaskChildWindow::GetChildWindowId() ); + GetViewFrame()->GetBindings().Invalidate( SID_BMPMASK ); + + Cancel(); + rReq.Ignore (); + } + break; + + case SID_NAVIGATOR: + { + if ( rReq.GetArgs() ) + GetViewFrame()->SetChildWindow(SID_NAVIGATOR, + static_cast<const SfxBoolItem&>(rReq.GetArgs()-> + Get(SID_NAVIGATOR)).GetValue()); + else + GetViewFrame()->ToggleChildWindow( SID_NAVIGATOR ); + + GetViewFrame()->GetBindings().Invalidate(SID_NAVIGATOR); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_SLIDE_TRANSITIONS_PANEL: + case SID_MASTER_SLIDES_PANEL: + case SID_CUSTOM_ANIMATION_PANEL: + case SID_GALLERY: + { + // First make sure that the sidebar is visible + GetViewFrame()->ShowChildWindow(SID_SIDEBAR); + + OUString panelId; + if (nSId == SID_CUSTOM_ANIMATION_PANEL) + panelId = "SdCustomAnimationPanel"; + else if (nSId == SID_GALLERY) + panelId = "GalleryPanel"; + else if (nSId == SID_SLIDE_TRANSITIONS_PANEL) + panelId = "SdSlideTransitionPanel"; + else if (nSId == SID_MASTER_SLIDES_PANEL) + panelId = "SdAllMasterPagesPanel"; + + ::sfx2::sidebar::Sidebar::TogglePanel( + panelId, + GetViewFrame()->GetFrame().GetFrameInterface()); + + Cancel(); + rReq.Done(); + } + break; + + case SID_ANIMATION_OBJECTS: + { + if ( rReq.GetArgs() ) + GetViewFrame()->SetChildWindow( + AnimationChildWindow::GetChildWindowId(), + static_cast<const SfxBoolItem&>(rReq.GetArgs()-> + Get(SID_ANIMATION_OBJECTS)).GetValue()); + else + GetViewFrame()->ToggleChildWindow( + AnimationChildWindow::GetChildWindowId() ); + + GetViewFrame()->GetBindings().Invalidate(SID_ANIMATION_OBJECTS); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_3D_WIN: + { + if ( rReq.GetArgs() ) + GetViewFrame()->SetChildWindow( Svx3DChildWindow::GetChildWindowId(), + static_cast<const SfxBoolItem&>(rReq.GetArgs()-> + Get( SID_3D_WIN )).GetValue()); + else + GetViewFrame()->ToggleChildWindow( Svx3DChildWindow::GetChildWindowId() ); + + GetViewFrame()->GetBindings().Invalidate( SID_3D_WIN ); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_CONVERT_TO_3D_LATHE_FAST: + { + /* The call is enough. The initialization via Start3DCreation and + CreateMirrorPolygons is no longer needed if the parameter + sal_True is provided. Then a tilted rotary body with an axis left + besides the bounding rectangle of the selected objects is drawn + immediately and without user interaction. */ + mpDrawView->SdrEndTextEdit(); + if(GetActiveWindow()) + GetActiveWindow()->EnterWait(); + mpDrawView->End3DCreation(true); + Cancel(); + rReq.Ignore(); + if(GetActiveWindow()) + GetActiveWindow()->LeaveWait(); + } + break; + + case SID_PRESENTATION_DLG: + { + SetCurrentFunction( FuSlideShowDlg::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case SID_REMOTE_DLG: + { +#ifdef ENABLE_SDREMOTE + SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create(); + ScopedVclPtr<VclAbstractDialog> pDlg(pFact->CreateRemoteDialog(GetFrameWeld())); + pDlg->Execute(); +#endif + } + break; + + case SID_CUSTOMSHOW_DLG: + { + SetCurrentFunction( FuCustomShowDlg::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case SID_EXPAND_PAGE: + { + SetCurrentFunction( FuExpandPage::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + + case SID_SUMMARY_PAGE: + { + mpDrawView->SdrEndTextEdit(); + SetCurrentFunction( FuSummaryPage::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + Cancel(); + } + break; + +#if HAVE_FEATURE_AVMEDIA + case SID_AVMEDIA_PLAYER: + { + GetViewFrame()->ToggleChildWindow( ::avmedia::MediaPlayer::GetChildWindowId() ); + GetViewFrame()->GetBindings().Invalidate( SID_AVMEDIA_PLAYER ); + Cancel(); + rReq.Ignore (); + } + break; +#endif + + case SID_PRESENTATION_MINIMIZER: + { + Reference<XComponentContext> xContext(::comphelper::getProcessComponentContext()); + Reference<util::XURLTransformer> xParser(util::URLTransformer::create(xContext)); + Reference<frame::XDispatchProvider> xProvider(GetViewShellBase().GetController()->getFrame(), UNO_QUERY); + if (xProvider.is()) + { + util::URL aURL; + aURL.Complete = "vnd.com.sun.star.comp.PresentationMinimizer:execute"; + xParser->parseStrict(aURL); + uno::Reference<frame::XDispatch> xDispatch(xProvider->queryDispatch(aURL, OUString(), 0)); + if (xDispatch.is()) + { + xDispatch->dispatch(aURL, uno::Sequence< beans::PropertyValue >()); + } + } + Cancel(); + rReq.Ignore(); + } + break; + + case SID_DISPLAY_MASTER_BACKGROUND: + case SID_DISPLAY_MASTER_OBJECTS: + { + // Determine current page and toggle visibility of layers + // associated with master page background or master page shapes. + // FIXME: This solution is wrong, because shapes of master pages need + // not be on layer "background" or "backgroundobjects". + // See tdf#118613 + SdPage* pPage = GetActualPage(); + if (pPage != nullptr + && GetDoc() != nullptr) + { + SdrLayerIDSet aVisibleLayers = pPage->TRG_GetMasterPageVisibleLayers(); + SdrLayerAdmin& rLayerAdmin = GetDoc()->GetLayerAdmin(); + SdrLayerID aLayerId; + if (nSId == SID_DISPLAY_MASTER_BACKGROUND) + aLayerId = rLayerAdmin.GetLayerID(sUNO_LayerName_background); + else + aLayerId = rLayerAdmin.GetLayerID(sUNO_LayerName_background_objects); + aVisibleLayers.Set(aLayerId, !aVisibleLayers.IsSet(aLayerId)); + pPage->TRG_SetMasterPageVisibleLayers(aVisibleLayers); + } + Cancel(); + rReq.Ignore (); + } + break; + + case SID_PHOTOALBUM: + { + SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create(); + vcl::Window* pWin = GetActiveWindow(); + ScopedVclPtr<VclAbstractDialog> pDlg(pFact->CreateSdPhotoAlbumDialog( + pWin ? pWin->GetFrameWeld() : nullptr, + GetDoc())); + + pDlg->Execute(); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_INSERT_QRCODE: + case SID_EDIT_QRCODE: + { + VclAbstractDialogFactory* pFact = VclAbstractDialogFactory::Create(); + const uno::Reference<frame::XModel> xModel = GetViewShellBase().GetController()->getModel(); + ScopedVclPtr<AbstractQrCodeGenDialog> pDlg(pFact->CreateQrCodeGenDialog( + GetFrameWeld(), xModel, rReq.GetSlot() == SID_EDIT_QRCODE)); + pDlg->Execute(); + Cancel(); + rReq.Ignore (); + } + break; + + case SID_ATTR_GLOW_COLOR: + case SID_ATTR_GLOW_RADIUS: + case SID_ATTR_GLOW_TRANSPARENCY: + case SID_ATTR_SOFTEDGE_RADIUS: + if (const SfxItemSet* pNewArgs = rReq.GetArgs()) + mpDrawView->SetAttributes(*pNewArgs); + rReq.Done(); + Cancel(); + break; + + default: + { + SAL_WARN( "sd.ui", "Slot without function" ); + Cancel(); + rReq.Ignore (); + } + break; + } + + if(HasCurrentFunction()) + { + GetCurrentFunction()->Activate(); + } +} + +void DrawViewShell::ExecChar( SfxRequest &rReq ) +{ + SdDrawDocument* pDoc = GetDoc(); + if (!pDoc || !mpDrawView) + return; + + SfxItemSet aEditAttr( pDoc->GetPool() ); + mpDrawView->GetAttributes( aEditAttr ); + + //modified by wj for sym2_1580, if put old itemset into new set, + //when mpDrawView->SetAttributes(aNewAttr) it will invalidate all the item + // and use old attr to update all the attributes +// SfxItemSet aNewAttr( GetPool(), +// EE_ITEMS_START, EE_ITEMS_END ); +// aNewAttr.Put( aEditAttr, sal_False ); + SfxItemSet aNewAttr( pDoc->GetPool() ); + //modified end + + sal_uInt16 nSId = rReq.GetSlot(); + + switch ( nSId ) + { + case SID_ATTR_CHAR_FONT: + if( rReq.GetArgs() ) + { + const SvxFontItem* pItem = rReq.GetArg<SvxFontItem>(SID_ATTR_CHAR_FONT); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_ATTR_CHAR_FONTHEIGHT: + if( rReq.GetArgs() ) + { + const SvxFontHeightItem* pItem = rReq.GetArg<SvxFontHeightItem>(SID_ATTR_CHAR_FONTHEIGHT); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_ATTR_CHAR_WEIGHT: + if( rReq.GetArgs() ) + { + const SvxWeightItem* pItem = rReq.GetArg<SvxWeightItem>(SID_ATTR_CHAR_WEIGHT); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_ATTR_CHAR_POSTURE: + if( rReq.GetArgs() ) + { + const SvxPostureItem* pItem = rReq.GetArg<SvxPostureItem>(SID_ATTR_CHAR_POSTURE); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_ATTR_CHAR_UNDERLINE: + if( rReq.GetArgs() ) + { + const SvxUnderlineItem* pItem = rReq.GetArg<SvxUnderlineItem>(SID_ATTR_CHAR_UNDERLINE); + if (pItem) + { + aNewAttr.Put(*pItem); + } + else + { + FontLineStyle eFU = aEditAttr.Get( EE_CHAR_UNDERLINE ).GetLineStyle(); + aNewAttr.Put( SvxUnderlineItem( eFU != LINESTYLE_NONE ?LINESTYLE_NONE : LINESTYLE_SINGLE, EE_CHAR_UNDERLINE ) ); + } + } + break; + case SID_ATTR_CHAR_OVERLINE: + if( rReq.GetArgs() ) + { + const SvxOverlineItem* pItem = rReq.GetArg<SvxOverlineItem>(SID_ATTR_CHAR_OVERLINE); + if (pItem) + { + aNewAttr.Put(*pItem); + } + else + { + FontLineStyle eFU = aEditAttr.Get( EE_CHAR_OVERLINE ).GetLineStyle(); + aNewAttr.Put( SvxOverlineItem( eFU != LINESTYLE_NONE ?LINESTYLE_NONE : LINESTYLE_SINGLE, EE_CHAR_OVERLINE ) ); + } + } + break; + + case SID_ULINE_VAL_NONE: + { + aNewAttr.Put(SvxUnderlineItem(LINESTYLE_NONE, EE_CHAR_UNDERLINE)); + break; + } + + case SID_ULINE_VAL_SINGLE: + case SID_ULINE_VAL_DOUBLE: + case SID_ULINE_VAL_DOTTED: + { + FontLineStyle eOld = aEditAttr.Get(EE_CHAR_UNDERLINE).GetLineStyle(); + FontLineStyle eNew = eOld; + + switch (nSId) + { + case SID_ULINE_VAL_SINGLE: + eNew = ( eOld == LINESTYLE_SINGLE ) ? LINESTYLE_NONE : LINESTYLE_SINGLE; + break; + case SID_ULINE_VAL_DOUBLE: + eNew = ( eOld == LINESTYLE_DOUBLE ) ? LINESTYLE_NONE : LINESTYLE_DOUBLE; + break; + case SID_ULINE_VAL_DOTTED: + eNew = ( eOld == LINESTYLE_DOTTED ) ? LINESTYLE_NONE : LINESTYLE_DOTTED; + break; + } + + SvxUnderlineItem aUnderline(eNew, EE_CHAR_UNDERLINE); + aNewAttr.Put(aUnderline); + } + break; + + case SID_ATTR_CHAR_SHADOWED: + if( rReq.GetArgs() ) + { + const SvxShadowedItem* pItem = rReq.GetArg<SvxShadowedItem>(SID_ATTR_CHAR_SHADOWED); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_ATTR_CHAR_CONTOUR: + if( rReq.GetArgs() ) + { + const SvxContourItem* pItem = rReq.GetArg<SvxContourItem>(SID_ATTR_CHAR_CONTOUR); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + + case SID_ATTR_CHAR_STRIKEOUT: + if( rReq.GetArgs() ) + { + const SvxCrossedOutItem* pItem = rReq.GetArg<SvxCrossedOutItem>(SID_ATTR_CHAR_STRIKEOUT); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_ATTR_CHAR_COLOR: + if( rReq.GetArgs() ) + { + const SvxColorItem* pItem = rReq.GetArg<SvxColorItem>(SID_ATTR_CHAR_COLOR); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_ATTR_CHAR_KERNING: + if( rReq.GetArgs() ) + { + const SvxKerningItem* pItem = rReq.GetArg<SvxKerningItem>(SID_ATTR_CHAR_KERNING); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_ATTR_CHAR_CASEMAP: + if( rReq.GetArgs() ) + { + const SvxCaseMapItem* pItem = rReq.GetArg<SvxCaseMapItem>(SID_ATTR_CHAR_CASEMAP); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + case SID_SET_SUB_SCRIPT: + { + SvxEscapementItem aItem( EE_CHAR_ESCAPEMENT ); + SvxEscapement eEsc = static_cast<SvxEscapement>(aEditAttr.Get( EE_CHAR_ESCAPEMENT ).GetEnumValue()); + if( eEsc == SvxEscapement::Subscript ) + aItem.SetEscapement( SvxEscapement::Off ); + else + aItem.SetEscapement( SvxEscapement::Subscript ); + aNewAttr.Put( aItem ); + } + break; + case SID_SET_SUPER_SCRIPT: + { + SvxEscapementItem aItem( EE_CHAR_ESCAPEMENT ); + SvxEscapement eEsc = static_cast<SvxEscapement>(aEditAttr.Get( EE_CHAR_ESCAPEMENT ).GetEnumValue()); + if( eEsc == SvxEscapement::Superscript ) + aItem.SetEscapement( SvxEscapement::Off ); + else + aItem.SetEscapement( SvxEscapement::Superscript ); + aNewAttr.Put( aItem ); + } + break; + case SID_SHRINK_FONT_SIZE: + case SID_GROW_FONT_SIZE: + { + const SvxFontListItem* pFonts = dynamic_cast<const SvxFontListItem*>(GetDocSh()->GetItem( SID_ATTR_CHAR_FONTLIST ) ); + const FontList* pFontList = pFonts ? pFonts->GetFontList() : nullptr; + if( pFontList ) + { + FuText::ChangeFontSize( nSId == SID_GROW_FONT_SIZE, nullptr, pFontList, mpView ); + GetViewFrame()->GetBindings().Invalidate( SID_ATTR_CHAR_FONTHEIGHT ); + } + break; + } + case SID_ATTR_CHAR_BACK_COLOR: + if( rReq.GetArgs() ) + { + const SvxBackgroundColorItem* pItem = rReq.GetArg<SvxBackgroundColorItem>(SID_ATTR_CHAR_BACK_COLOR); + if (pItem) + { + aNewAttr.Put(*pItem); + } + } + break; + default: + break; + } + + mpDrawView->SetAttributes(aNewAttr); + rReq.Done(); + Cancel(); +} + +/** This method consists basically of three parts: + 1. Process the arguments of the SFX request. + 2. Use the model to create a new page or duplicate an existing one. + 3. Update the tab control and switch to the new page. +*/ +SdPage* DrawViewShell::CreateOrDuplicatePage ( + SfxRequest& rRequest, + PageKind ePageKind, + SdPage* pPage, + const sal_Int32 nInsertPosition) +{ + SdPage* pNewPage = nullptr; + if (ePageKind == PageKind::Standard && meEditMode != EditMode::MasterPage) + { + if ( mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + pNewPage = ViewShell::CreateOrDuplicatePage (rRequest, ePageKind, pPage, nInsertPosition); + } + return pNewPage; +} + +void DrawViewShell::ExecutePropPanelAttr (SfxRequest const & rReq) +{ + if(SlideShow::IsRunning( GetViewShellBase() )) + return; + + SdDrawDocument* pDoc = GetDoc(); + if (!pDoc || !mpDrawView) + return; + + sal_uInt16 nSId = rReq.GetSlot(); + SfxItemSet aAttrs( pDoc->GetPool() ); + + switch ( nSId ) + { + case SID_TABLE_VERT_NONE: + case SID_TABLE_VERT_CENTER: + case SID_TABLE_VERT_BOTTOM: + SdrTextVertAdjust eTVA = SDRTEXTVERTADJUST_TOP; + if (nSId == SID_TABLE_VERT_CENTER) + eTVA = SDRTEXTVERTADJUST_CENTER; + else if (nSId == SID_TABLE_VERT_BOTTOM) + eTVA = SDRTEXTVERTADJUST_BOTTOM; + + aAttrs.Put( SdrTextVertAdjustItem(eTVA) ); + mpDrawView->SetAttributes(aAttrs); + + break; + } +} + +void DrawViewShell::GetStatePropPanelAttr(SfxItemSet& rSet) +{ + SfxWhichIter aIter( rSet ); + sal_uInt16 nWhich = aIter.FirstWhich(); + + SdDrawDocument* pDoc = GetDoc(); + if (!pDoc || !mpDrawView) + return; + + SfxItemSet aAttrs( pDoc->GetPool() ); + mpDrawView->GetAttributes( aAttrs ); + + while ( nWhich ) + { + sal_uInt16 nSlotId = SfxItemPool::IsWhich(nWhich) + ? GetPool().GetSlotId(nWhich) + : nWhich; + switch ( nSlotId ) + { + case SID_TABLE_VERT_NONE: + case SID_TABLE_VERT_CENTER: + case SID_TABLE_VERT_BOTTOM: + bool bContour = false; + SfxItemState eConState = aAttrs.GetItemState( SDRATTR_TEXT_CONTOURFRAME ); + if( eConState != SfxItemState::DONTCARE ) + { + bContour = aAttrs.Get( SDRATTR_TEXT_CONTOURFRAME ).GetValue(); + } + if (bContour) break; + + SfxItemState eVState = aAttrs.GetItemState( SDRATTR_TEXT_VERTADJUST ); + //SfxItemState eHState = aAttrs.GetItemState( SDRATTR_TEXT_HORZADJUST ); + + //if(SfxItemState::DONTCARE != eVState && SfxItemState::DONTCARE != eHState) + if(SfxItemState::DONTCARE != eVState) + { + SdrTextVertAdjust eTVA = aAttrs.Get(SDRATTR_TEXT_VERTADJUST).GetValue(); + bool bSet = (nSlotId == SID_TABLE_VERT_NONE && eTVA == SDRTEXTVERTADJUST_TOP) || + (nSlotId == SID_TABLE_VERT_CENTER && eTVA == SDRTEXTVERTADJUST_CENTER) || + (nSlotId == SID_TABLE_VERT_BOTTOM && eTVA == SDRTEXTVERTADJUST_BOTTOM); + rSet.Put(SfxBoolItem(nSlotId, bSet)); + } + else + { + rSet.Put(SfxBoolItem(nSlotId, false)); + } + break; + } + nWhich = aIter.NextWhich(); + } +} + +} // end of namespace sd + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |