diff options
Diffstat (limited to 'svtools/source/dialogs/prnsetup.cxx')
| -rw-r--r-- | svtools/source/dialogs/prnsetup.cxx | 344 |
1 files changed, 344 insertions, 0 deletions
diff --git a/svtools/source/dialogs/prnsetup.cxx b/svtools/source/dialogs/prnsetup.cxx new file mode 100644 index 000000000..03afe9eef --- /dev/null +++ b/svtools/source/dialogs/prnsetup.cxx @@ -0,0 +1,344 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <svtools/prnsetup.hxx> +#include <svtools/strings.hrc> +#include <svtools/svtresid.hxx> +#include <vcl/svapp.hxx> +#include <vcl/print.hxx> +#include <vcl/event.hxx> +#include <sal/log.hxx> + +void ImplFillPrnDlgListBox( const Printer* pPrinter, + weld::ComboBox* pBox, weld::Button* pPropBtn ) +{ + ImplFreePrnDlgListBox( pBox ); + + const std::vector<OUString>& rPrinters = Printer::GetPrinterQueues(); + unsigned int nCount = rPrinters.size(); + if ( nCount ) + { + for( unsigned int i = 0; i < nCount; i++ ) + pBox->append_text( rPrinters[i] ); + pBox->set_active_text(pPrinter->GetName()); + } + + pBox->set_sensitive(nCount != 0); + pPropBtn->set_visible( pPrinter->HasSupport( PrinterSupport::SetupDialog ) ); +} + + +void ImplFreePrnDlgListBox( weld::ComboBox* pBox, bool bClear ) +{ + if ( bClear ) + pBox->clear(); +} + + +Printer* ImplPrnDlgListBoxSelect( const weld::ComboBox* pBox, weld::Button* pPropBtn, + Printer const * pPrinter, Printer* pTempPrinterIn ) +{ + VclPtr<Printer> pTempPrinter( pTempPrinterIn ); + if ( pBox->get_active() != -1 ) + { + const QueueInfo* pInfo = Printer::GetQueueInfo( pBox->get_active_text(), true ); + if( pInfo) + { + if ( !pTempPrinter ) + { + if ( (pPrinter->GetName() == pInfo->GetPrinterName()) && + (pPrinter->GetDriverName() == pInfo->GetDriver()) ) + pTempPrinter = VclPtr<Printer>::Create( pPrinter->GetJobSetup() ); + else + pTempPrinter = VclPtr<Printer>::Create( *pInfo ); + } + else + { + if ( (pTempPrinter->GetName() != pInfo->GetPrinterName()) || + (pTempPrinter->GetDriverName() != pInfo->GetDriver()) ) + { + pTempPrinter.disposeAndClear(); + pTempPrinter = VclPtr<Printer>::Create( *pInfo ); + } + } + + pPropBtn->set_sensitive(pTempPrinter->HasSupport(PrinterSupport::SetupDialog)); + } + else + pPropBtn->set_sensitive(false); + } + else + pPropBtn->set_sensitive(false); + + return pTempPrinter; +} + + +Printer* ImplPrnDlgUpdatePrinter( Printer const * pPrinter, Printer* pTempPrinterIn ) +{ + VclPtr<Printer> pTempPrinter( pTempPrinterIn ); + OUString aPrnName; + if ( pTempPrinter ) + aPrnName = pTempPrinter->GetName(); + else + aPrnName = pPrinter->GetName(); + + if ( ! Printer::GetQueueInfo( aPrnName, false ) ) + { + pTempPrinter.disposeAndClear(); + pTempPrinter = VclPtr<Printer>::Create(); + } + + return pTempPrinter; +} + + +void ImplPrnDlgUpdateQueueInfo( const weld::ComboBox* pBox, QueueInfo& rInfo ) +{ + if ( pBox->get_active() != -1 ) + { + const QueueInfo* pInfo = Printer::GetQueueInfo( pBox->get_active_text(), true ); + if( pInfo ) + rInfo = *pInfo; + } +} + + +static OUString ImplPrnDlgAddString(const OUString& rStr, const OUString& rAddStr) +{ + OUString aStr(rStr); + if (!aStr.isEmpty()) + aStr += "; " ; + return aStr + rAddStr; +} + + +static OUString ImplPrnDlgAddResString(const OUString& rStr, const char* pResId) +{ + return ImplPrnDlgAddString(rStr, SvtResId(pResId)); +} + + +OUString ImplPrnDlgGetStatusText( const QueueInfo& rInfo ) +{ + OUString aStr; + PrintQueueFlags nStatus = rInfo.GetStatus(); + + // Default-Printer + if ( !rInfo.GetPrinterName().isEmpty() && + (rInfo.GetPrinterName() == Printer::GetDefaultPrinterName()) ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_DEFPRINTER ); + + // Status + if ( nStatus & PrintQueueFlags::Ready ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_READY ); + if ( nStatus & PrintQueueFlags::Paused ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAUSED ); + if ( nStatus & PrintQueueFlags::PendingDeletion ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PENDING ); + if ( nStatus & PrintQueueFlags::Busy ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_BUSY ); + if ( nStatus & PrintQueueFlags::Initializing ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_INITIALIZING ); + if ( nStatus & PrintQueueFlags::Waiting ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_WAITING ); + if ( nStatus & PrintQueueFlags::WarmingUp ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_WARMING_UP ); + if ( nStatus & PrintQueueFlags::Processing ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PROCESSING ); + if ( nStatus & PrintQueueFlags::Printing ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PRINTING ); + if ( nStatus & PrintQueueFlags::Offline ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_OFFLINE ); + if ( nStatus & PrintQueueFlags::Error ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_ERROR ); + if ( nStatus & PrintQueueFlags::StatusUnknown ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_SERVER_UNKNOWN ); + if ( nStatus & PrintQueueFlags::PaperJam ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAPER_JAM ); + if ( nStatus & PrintQueueFlags::PaperOut ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAPER_OUT ); + if ( nStatus & PrintQueueFlags::ManualFeed ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_MANUAL_FEED ); + if ( nStatus & PrintQueueFlags::PaperProblem ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAPER_PROBLEM ); + if ( nStatus & PrintQueueFlags::IOActive ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_IO_ACTIVE ); + if ( nStatus & PrintQueueFlags::OutputBinFull ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_OUTPUT_BIN_FULL ); + if ( nStatus & PrintQueueFlags::TonerLow ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_TONER_LOW ); + if ( nStatus & PrintQueueFlags::NoToner ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_NO_TONER ); + if ( nStatus & PrintQueueFlags::PagePunt ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_PAGE_PUNT ); + if ( nStatus & PrintQueueFlags::UserIntervention ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_USER_INTERVENTION ); + if ( nStatus & PrintQueueFlags::OutOfMemory ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_OUT_OF_MEMORY ); + if ( nStatus & PrintQueueFlags::DoorOpen ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_DOOR_OPEN ); + if ( nStatus & PrintQueueFlags::PowerSave ) + aStr = ImplPrnDlgAddResString( aStr, STR_SVT_PRNDLG_POWER_SAVE ); + + // Number of jobs + sal_uInt32 nJobs = rInfo.GetJobs(); + if ( nJobs && (nJobs != QUEUE_JOBS_DONTKNOW) ) + { + OUString aJobStr( SvtResId( STR_SVT_PRNDLG_JOBCOUNT ) ); + OUString aJobs( OUString::number( nJobs ) ); + aStr = ImplPrnDlgAddString(aStr, aJobStr.replaceAll("%d", aJobs)); + } + + return aStr; +} + +PrinterSetupDialog::PrinterSetupDialog(weld::Window* pParent) + : GenericDialogController(pParent, "svt/ui/printersetupdialog.ui", "PrinterSetupDialog") + , m_xLbName(m_xBuilder->weld_combo_box("name")) + , m_xBtnProperties(m_xBuilder->weld_button("properties")) + , m_xBtnOptions(m_xBuilder->weld_button("options")) + , m_xFiStatus(m_xBuilder->weld_label("status")) + , m_xFiType(m_xBuilder->weld_label("type")) + , m_xFiLocation(m_xBuilder->weld_label("location")) + , m_xFiComment(m_xBuilder->weld_label("comment")) +{ + m_xLbName->make_sorted(); + + // show options button only if link is set + m_xBtnOptions->hide(); + + mpPrinter = nullptr; + mpTempPrinter = nullptr; + + maStatusTimer.SetTimeout( IMPL_PRINTDLG_STATUS_UPDATE ); + maStatusTimer.SetInvokeHandler( LINK( this, PrinterSetupDialog, ImplStatusHdl ) ); + m_xBtnProperties->connect_clicked( LINK( this, PrinterSetupDialog, ImplPropertiesHdl ) ); + m_xLbName->connect_changed( LINK( this, PrinterSetupDialog, ImplChangePrinterHdl ) ); + m_xDialog->connect_focus_in( LINK( this, PrinterSetupDialog, ImplGetFocusHdl ) ); + Application::AddEventListener(LINK( this, PrinterSetupDialog, ImplDataChangedHdl ) ); +} + +PrinterSetupDialog::~PrinterSetupDialog() +{ + Application::RemoveEventListener(LINK( this, PrinterSetupDialog, ImplDataChangedHdl ) ); + ImplFreePrnDlgListBox(m_xLbName.get(), false); +} + +void PrinterSetupDialog::SetOptionsHdl(const Link<weld::Button&, void>& rLink) +{ + m_xBtnOptions->connect_clicked(rLink); + m_xBtnOptions->set_visible(rLink.IsSet()); +} + +void PrinterSetupDialog::ImplSetInfo() +{ + const QueueInfo* pInfo = Printer::GetQueueInfo(m_xLbName->get_active_text(), true); + if ( pInfo ) + { + m_xFiType->set_label( pInfo->GetDriver() ); + m_xFiLocation->set_label( pInfo->GetLocation() ); + m_xFiComment->set_label( pInfo->GetComment() ); + m_xFiStatus->set_label( ImplPrnDlgGetStatusText( *pInfo ) ); + } + else + { + OUString aTempStr; + m_xFiType->set_label( aTempStr ); + m_xFiLocation->set_label( aTempStr ); + m_xFiComment->set_label( aTempStr ); + m_xFiStatus->set_label( aTempStr ); + } +} + +IMPL_LINK_NOARG(PrinterSetupDialog, ImplStatusHdl, Timer *, void) +{ + QueueInfo aInfo; + ImplPrnDlgUpdateQueueInfo(m_xLbName.get(), aInfo); + m_xFiStatus->set_label( ImplPrnDlgGetStatusText( aInfo ) ); +} + + +IMPL_LINK_NOARG(PrinterSetupDialog, ImplPropertiesHdl, weld::Button&, void) +{ + if ( !mpTempPrinter ) + mpTempPrinter = VclPtr<Printer>::Create( mpPrinter->GetJobSetup() ); + mpTempPrinter->Setup(m_xDialog.get()); +} + +IMPL_LINK_NOARG(PrinterSetupDialog, ImplChangePrinterHdl, weld::ComboBox&, void) +{ + mpTempPrinter = ImplPrnDlgListBoxSelect(m_xLbName.get(), m_xBtnProperties.get(), + mpPrinter, mpTempPrinter); + ImplSetInfo(); +} + +IMPL_LINK(PrinterSetupDialog, ImplGetFocusHdl, weld::Widget&, rWidget, void) +{ + if (rWidget.is_visible()) + ImplStatusHdl(&maStatusTimer); +} + +IMPL_LINK(PrinterSetupDialog, ImplDataChangedHdl, VclSimpleEvent&, rEvt, void) +{ + VclEventId nEvent = rEvt.GetId(); + if (nEvent != VclEventId::ApplicationDataChanged) + return; + + DataChangedEvent* pData = static_cast<DataChangedEvent*>(static_cast<VclWindowEvent&>(rEvt).GetData()); + if (!pData || pData->GetType() != DataChangedEventType::PRINTER) + return; + + mpTempPrinter = ImplPrnDlgUpdatePrinter(mpPrinter, mpTempPrinter); + Printer* pPrn; + if (mpTempPrinter) + pPrn = mpTempPrinter; + else + pPrn = mpPrinter; + ImplFillPrnDlgListBox(pPrn, m_xLbName.get(), m_xBtnProperties.get()); + ImplSetInfo(); +} + +short PrinterSetupDialog::run() +{ + if ( !mpPrinter || mpPrinter->IsPrinting() || mpPrinter->IsJobActive() ) + { + SAL_WARN( "svtools.dialogs", "PrinterSetupDialog::execute() - No Printer or printer is printing" ); + return RET_CANCEL; + } + + Printer::updatePrinters(); + + ImplFillPrnDlgListBox(mpPrinter, m_xLbName.get(), m_xBtnProperties.get()); + ImplSetInfo(); + maStatusTimer.Start(); + + // start dialog + short nRet = GenericDialogController::run(); + + // update data if the dialog was terminated with OK + if ( nRet == RET_OK && mpTempPrinter ) + mpPrinter->SetPrinterProps( mpTempPrinter ); + + maStatusTimer.Stop(); + + return nRet; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |