diff options
Diffstat (limited to 'svx/qa/unit/customshapes.cxx')
| -rw-r--r-- | svx/qa/unit/customshapes.cxx | 819 |
1 files changed, 819 insertions, 0 deletions
diff --git a/svx/qa/unit/customshapes.cxx b/svx/qa/unit/customshapes.cxx new file mode 100644 index 000000000..0c362cac1 --- /dev/null +++ b/svx/qa/unit/customshapes.cxx @@ -0,0 +1,819 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + */ + +#include <test/bootstrapfixture.hxx> +#include <unotest/macros_test.hxx> +#include <rtl/ustring.hxx> +#include <editeng/unoprnms.hxx> +#include <basegfx/polygon/b2dpolypolygon.hxx> +#include <basegfx/polygon/b2dpolygon.hxx> +#include <basegfx/point/b2dpoint.hxx> +#include <svx/EnhancedCustomShape2d.hxx> +#include <svx/svdoashp.hxx> +#include <svx/svdopath.hxx> +#include <svx/unoapi.hxx> +#include <unotools/mediadescriptor.hxx> +#include <unotools/tempfile.hxx> + +#include <cppunit/TestAssert.h> + +#include <com/sun/star/beans/XPropertySet.hpp> +#include <com/sun/star/drawing/XDrawPagesSupplier.hpp> +#include <com/sun/star/drawing/XDrawPage.hpp> +#include <com/sun/star/awt/Rectangle.hpp> +#include <com/sun/star/frame/Desktop.hpp> +#include <com/sun/star/frame/XStorable.hpp> + +using namespace ::com::sun::star; + +namespace +{ +const OUString sDataDirectory("svx/qa/unit/data/"); + +/// Tests for svx/source/customshapes/ code. +class CustomshapesTest : public test::BootstrapFixture, public unotest::MacrosTest +{ +protected: + uno::Reference<lang::XComponent> mxComponent; + // get shape nShapeIndex from page 0 + uno::Reference<drawing::XShape> getShape(sal_uInt8 nShapeIndex); + sal_uInt8 countShapes(); + +public: + virtual void setUp() override + { + test::BootstrapFixture::setUp(); + mxDesktop.set(frame::Desktop::create(m_xContext)); + } + + virtual void tearDown() override + { + if (mxComponent.is()) + { + mxComponent->dispose(); + } + test::BootstrapFixture::tearDown(); + } +}; + +uno::Reference<drawing::XShape> CustomshapesTest::getShape(sal_uInt8 nShapeIndex) +{ + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, + uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("Could not get XDrawPagesSupplier", xDrawPagesSupplier.is()); + uno::Reference<drawing::XDrawPages> xDrawPages(xDrawPagesSupplier->getDrawPages()); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("Could not get xDrawPage", xDrawPage.is()); + uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(nShapeIndex), uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get xShape", xShape.is()); + return xShape; +} + +sal_uInt8 CustomshapesTest::countShapes() +{ + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, + uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("Could not get XDrawPagesSupplier", xDrawPagesSupplier.is()); + uno::Reference<drawing::XDrawPages> xDrawPages(xDrawPagesSupplier->getDrawPages()); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("Could not get xDrawPage", xDrawPage.is()); + return xDrawPage->getCount(); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testViewBoxLeftTop) +{ + // tdf#121890 formula values "left" and "top" are wrongly calculated + // Load a document with two custom shapes of type "non-primitive" + OUString aURL + = m_directories.getURLFromSrc(sDataDirectory) + "viewBox_positive_twolines_strict.odp"; + mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + // Get the shape "leftright". Error was, that the identifier "left" was always set to zero, thus + // the path was outside the frame rectangle for a viewBox having a positive "left" value. + uno::Reference<drawing::XShape> xShapeLR(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeLRProps(xShapeLR, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape 'leftright' properties", xShapeLRProps.is()); + awt::Rectangle aFrameRectLR; + xShapeLRProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRectLR; + awt::Rectangle aBoundRectLR; + xShapeLRProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectLR; + // difference should be zero, but allow some rounding errors + CPPUNIT_ASSERT_LESS(static_cast<long>(3), labs(aFrameRectLR.X - aBoundRectLR.X)); + + // Get the shape "topbottom". Error was, that the identifier "top" was always set to zero, thus + // the path was outside the frame rectangle for a viewBox having a positive "top" value. + uno::Reference<drawing::XShape> xShapeTB(getShape(1)); + uno::Reference<beans::XPropertySet> xShapeTBProps(xShapeTB, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape 'topbottom' properties", xShapeTBProps.is()); + awt::Rectangle aFrameRectTB; + xShapeTBProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRectTB; + awt::Rectangle aBoundRectTB; + xShapeTBProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectTB; + // difference should be zero, but allow some rounding errors + CPPUNIT_ASSERT_LESS(static_cast<long>(3), labs(aFrameRectTB.Y - aBoundRectTB.Y)); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testAccuracyCommandX) +{ + // 121761 Increase accuracy of quarter circles drawn by command X or Y + // The loaded document has a quarter circle with radius 10000 (unit 1/100 mm) + // which is rotated by 45deg. The test considers the segment. + OUString aURL + = m_directories.getURLFromSrc(sDataDirectory) + "tdf121761_Accuracy_command_X.odp"; + mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + // Get the shape "arc_45deg_rotated". Error was, that a Bezier curve with bad parameters + // was used, thus the segment height was obviously smaller than for a true circle. + // Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + double fHeight = static_cast<double>(aBoundRect.Height); + // The tolerance is a guess, might be smaller. + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("segment height out of tolerance", 2942.0, fHeight, 8.0); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testToggleCommandXY) +{ + // 121952 Toggle x- and y-direction if command X has several parameters + // The loaded document has a shape with command X and two parameter placed on a diagonal. + // The radius of the quarter circles are both 10000 (unit 1/100 mm). + // The shape is rotated by 45deg, so you get two segments, one up and one down. + OUString aURL + = m_directories.getURLFromSrc(sDataDirectory) + "tdf121952_Toggle_direction_command_X.odp"; + mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + // Error was, that the second segment was drawn with same direction as first one. If drawn + // correctly, the bounding box height of the segments together is about twice the single + // segment height. Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + double fHeight = static_cast<double>(aBoundRect.Height); + // The tolerance is a guess, might be smaller. + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("segment height out of tolerance", 5871.0, fHeight, 16.0); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testMultipleMoveTo) +{ + // tdf122964 Multiple moveTo has to be treated as lineTo in draw:enhanced-path + // Load a document with path "M 0 0 5 10 10 0 N" + OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf122964_MultipleMoveTo.odg"; + mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + // Error was, that the second and further parameter pairs were treated as moveTo, + // and so the generated path was empty, resulting in zero width and height of the + // bounding box. It has to be treated same as "M 0 0 L 5 10 10 0 N". + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + bool bIsZero(aBoundRect.Height == 0 && aBoundRect.Width == 0); + CPPUNIT_ASSERT_MESSAGE("Path is empty", !bIsZero); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testWidthOrientationCommandU) +{ + // tdf121845 custom shape with command U (angleellipse) is wrongly drawn + // Load a document with path "M 750 0 L 750 500 250 500 250 0 U 500 0 500 500 0 180 N" + // in viewBox="0 0 1000 500" and width="10cm", height="5cm". + const OUString sFileName("tdf121845_WidthOrientation_command_U.odg"); + const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + // Error was, that the width and height of the ellipse was halved and that the ellipse + // was not drawn clockwise but counter clockwise. + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + const double fWidth = static_cast<double>(aBoundRect.Width); + // Need some tolerance for line width + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("wrong width", 10000.0, fWidth, 40.0); + const double fHeight = static_cast<double>(aBoundRect.Height); + // Wrong orientation draws segment above the top of the viewBox and so increases 'Height'. + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("wrong orientation", 5000.0, fHeight, 40.0); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testHalfEllipseVML) +{ + // tdf121845 custom shape with command U (angleellipse) is wrongly drawn + // Load a document which was converted from VML to doc by Word. It had a VML + // path="m750,al500,,500,500,,-11796480e" resulting in a lower half circle. + const OUString sFileName("tdf121845_HalfEllipseVML.doc"); + const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + // Error was, that a full circle instead of the half circle was draw. + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + const double fDiff2HmW = static_cast<double>(2 * aBoundRect.Height - aBoundRect.Width); + // Need some tolerance for line width + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("not a half circle", 0.0, fDiff2HmW, 40.0); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testLargeSwingAngleVML) +{ + // tdf121845 custom shape with command U (angleellipse) is wrongly drawn + // Load a document which was converted from VML to doc by Word. It had a VML + // path="al50,50,45,45,2621440,31457280e" resulting in a full circle plus 120 deg segment. + const OUString sFileName("tdf121845_start40_swing480.doc"); + const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + // Error was, that only the 120 deg segment was drawn. + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + const double fDiffWmH = static_cast<double>(aBoundRect.Width - aBoundRect.Height); + // Need some tolerance for line width + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("Full circle plus segment expected", 0.0, fDiffWmH, 10.0); +} +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf121845_two_commands_U) +{ + // tdf121845 custom shape with command U (angleellipse) is wrongly drawn + // Load a document with path "U 950 250 200 200 90 180 250 250 200 200 180 270 N" + // Error was, that the second ellipse segment was interpreted as command T and + // thus a line from first to second segment was drawn. + const OUString sFileName("tdf121845_Two_commands_U.odg"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + uno::Reference<drawing::XShape> xShape(getShape(0)); + // In case no line is drawn, two polygons are generated; with line only one polygon + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); + SdrPathObj* pPathObj = static_cast<SdrPathObj*>(aCustomShape2d.CreateLineGeometry()); + CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); + const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); + CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast<sal_uInt32>(2), + aPolyPolygon.count()); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124212_handle_position) +{ + // tdf124212 Adjustment handle reacts wrongly, if custom shape has a non + // default viewBox. Load a document with svg:viewBox="10800 0 10800 21600" + // Error was, that moving the controller results in a handle position that + // does not reflect the movement. + const OUString sFileName("tdf124212_handle_position.odg"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + uno::Reference<drawing::XShape> xShape(getShape(0)); + // The shape has one, horizontal adjust handle. + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); + Point aInitialPosition; + aCustomShape2d.GetHandlePosition(0, aInitialPosition); + css::awt::Point aDesiredPosition(aInitialPosition.X() + 1000, aInitialPosition.Y()); + aCustomShape2d.SetHandleControllerPosition(0, aDesiredPosition); + Point aObservedPosition; + aCustomShape2d.GetHandlePosition(0, aObservedPosition); + sal_Int32 nDesiredX(aDesiredPosition.X); // awt::Point + sal_Int32 nObservedX(aObservedPosition.X()); // tools::Point + CPPUNIT_ASSERT_EQUAL_MESSAGE("handle X coordinate", nDesiredX, nObservedX); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124029_arc_position) +{ + // tdf121029 MS binary custom shape mso_sptArc has wrong position + // MS uses the sector for position reference. Error was, that + // LibreOffice has used the underlying ellipse. + const OUString sFileName("tdf124029_Arc_position.doc"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + uno::Reference<drawing::XShape> xShape(getShape(0)); + // The visual wrong position is due to a wrong shape width. + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aFrameRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRect; + CPPUNIT_ASSERT_EQUAL_MESSAGE("shape width", static_cast<sal_uInt32>(1610), + static_cast<sal_uInt32>(aFrameRect.Width)); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124740_handle_path_coordsystem) +{ + // tdf124740 OOXML shape with handle and w and h attribute on path has wrong + // handle position + // The handle position was scaled erroneously twice. + const OUString sFileName("tdf124740_HandleInOOXMLUserShape.pptx"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + uno::Reference<drawing::XShape> xShape(getShape(0)); + // The shape has one, horizontal adjust handle. It is about 1/5 of 10cm from left + // shape edge, shape is 6cm from left . That results in a position + // of 8cm from left page edge, which is 8000 in 1/100 mm unit. + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); + Point aPosition; + aCustomShape2d.GetHandlePosition(0, aPosition); + double fX(aPosition.X()); + // tolerance for rounding to integer + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("handle X coordinate", 8000.0, fX, 2.0); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf115813_OOXML_XY_handle) +{ + // The test covers all preset shapes with handles. Only these ones are + // excluded: arc, blockArc, chord, circularArrow, gear6, gear9, mathNotEqual, pie, + // leftCircularArrow, leftRightCircularArrow, swooshArrow. + // Connectors are included as ordinary shapes to prevent converting. + // Error was, that the handle movement and the changes to the shape did not follow + // the mouse movement. + const OUString sFileName("tdf115813_HandleMovementOOXMLPresetShapes.pptx"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + + OUString sErrors; + // values in vector InteractionsHandles are in 1/100 mm and refer to page + for (sal_uInt8 i = 0; i < countShapes(); i++) + { + uno::Reference<drawing::XShape> xShape(getShape(i)); + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + OUString sShapeType("non-primitive"); // default for ODF + const SdrCustomShapeGeometryItem& rGeometryItem( + rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY)); + const uno::Any* pAny = rGeometryItem.GetPropertyValueByName("Type"); + if (pAny) + *pAny >>= sShapeType; + + sal_uInt8 nHandlesCount = rSdrObjCustomShape.GetInteractionHandles().size(); + for (sal_uInt8 j = 0; j < nHandlesCount; j++) + { + css::awt::Point aInitialPosition( + rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); + // The handles are initialized in the test document, so that if the handle is moveable in + // that direction at all, then it can move at least with an amount of 100. + Point aDesiredPosition(aInitialPosition.X + 100, aInitialPosition.Y + 100); + rSdrObjCustomShape.DragMoveCustomShapeHdl(aDesiredPosition, j, false); + css::awt::Point aObservedPosition( + rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); + sal_Int32 nDesiredX(aDesiredPosition.X()); // tools::Point + sal_Int32 nDesiredY(aDesiredPosition.Y()); + sal_Int32 nObservedX(aObservedPosition.X); // css::awt::Point + sal_Int32 nObservedY(aObservedPosition.Y); + // If a handle only moves in one direction, the difference is 100 for the other direction. + // There exists some rounding differences, therefore '<= 1' instead of '== 0'. + // The condition has the form '!(good cases)'. + if (!((abs(nDesiredX - nObservedX) <= 1 && abs(nDesiredY - nObservedY) == 100) + || (abs(nDesiredX - nObservedX) == 100 && abs(nDesiredY - nObservedY) <= 1) + || (abs(nDesiredX - nObservedX) <= 1 && abs(nDesiredY - nObservedY) <= 1))) + { + sErrors += "\n" + + //sErrors += OUString(sal_Unicode(10)); + OUString::number(i) + " " + sShapeType + ": " + OUString::number(j) + + " X " + OUString::number(nDesiredX) + "|" + + OUString::number(nObservedX) + " Y " + OUString::number(nDesiredY) + + "|" + OUString::number(nObservedY); + } + } + } + CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testQuadraticCurveTo) +{ + // tdf125782 command Q (quadraticcurveto) uses wrong 'current point'. + // When converting to cubic Bezier curve, this had resulted in a wrong first control point. + // The quadraticcurveto segment starts in shape center in the test file. The first control + // point should produce a horizontal tangent in the start point. + const OUString sFileName("tdf125782_QuadraticCurveTo.odg"); + const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + const double fHeight = static_cast<double>(aBoundRect.Height); + //Add some tolerance + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("bad height of quadraticcurveto", 3004, fHeight, 10.0); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf126512_OOXML_handle_in_ODP) +{ + // The test covers all preset shapes with handles. Connectors are included as ordinary + // shapes to prevent converting. The file was created in PowerPoint 365 and then + // opened and exported to ODF format by LibreOffice. + // Error was, that for shapes, which were originally imported from OOXML, the handles + // could not be moved at all. + const OUString sFileName("tdf126512_OOXMLHandleMovementInODF.odp"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + + OUString sErrors; // sErrors collects shape type and handle index for failing cases + for (sal_uInt8 i = 0; i < countShapes(); i++) + { + uno::Reference<drawing::XShape> xShape(getShape(i)); + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + OUString sShapeType("non-primitive"); // only to initialize, value not used here + const SdrCustomShapeGeometryItem& rGeometryItem( + rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY)); + const uno::Any* pAny = rGeometryItem.GetPropertyValueByName("Type"); + if (pAny) + *pAny >>= sShapeType; + + sal_uInt8 nHandlesCount = rSdrObjCustomShape.GetInteractionHandles().size(); + for (sal_uInt8 j = 0; j < nHandlesCount; j++) + { + css::awt::Point aInitialPosition( + rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); + // The handles are initialized in the test document, so that if the handle is moveable + // in that direction at all, then it can move at least with an amount of 100. + Point aDesiredPosition(aInitialPosition.X + 100, aInitialPosition.Y + 100); + rSdrObjCustomShape.DragMoveCustomShapeHdl(aDesiredPosition, j, false); + css::awt::Point aObservedPosition( + rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); + if (aInitialPosition.X == aObservedPosition.X + && aInitialPosition.Y == aObservedPosition.Y) + { + sErrors + += "\n" + OUString::number(i) + " " + sShapeType + " " + OUString::number(j); + } + } + } + CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Mirror) +{ + // The document contains two shapes, one with horizontal flip, the other with vertical + // flip. They are diamonds, so their text frame is symmetric to the center of the shape. + // The shapes have not stroke and no fill, so that the bounding box surrounds the text + // and therefore equals approximately the text frame. + // Error was, that because of wrong calculation, the flipped shapes do not use the + // text frame but the frame rectangle for their text. + const OUString sFileName("tdf127785_Mirror.odp"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. + + uno::Reference<drawing::XShape> xShapeV(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeVProps(xShapeV, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeVProps.is()); + awt::Rectangle aBoundRectV; + xShapeVProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectV; + const sal_Int32 nHeightV = aBoundRectV.Height; + const sal_Int32 nWidthV = aBoundRectV.Width; + const sal_Int32 nLeftV = aBoundRectV.X; + const sal_Int32 nTopV = aBoundRectV.Y; + if (abs(nHeightV - 4149) > 5 || abs(nWidthV - 3819) > 5) + sErrors += "Flip vertical wrong size."; + if (abs(nLeftV - 3155) > 5 || abs(nTopV - 3736) > 5) + sErrors += " Flip vertical wrong position."; + + uno::Reference<drawing::XShape> xShapeH(getShape(1)); + uno::Reference<beans::XPropertySet> xShapeHProps(xShapeH, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeHProps.is()); + awt::Rectangle aBoundRectH; + xShapeHProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectH; + const sal_Int32 nHeightH = aBoundRectH.Height; + const sal_Int32 nWidthH = aBoundRectH.Width; + const sal_Int32 nLeftH = aBoundRectH.X; + const sal_Int32 nTopH = aBoundRectH.Y; + if (abs(nHeightH - 4149) > 5 || abs(nWidthH - 3819) > 5) + sErrors += " Flip horizontal wrong size."; + if (abs(nLeftH - 15026) > 5 || abs(nTopH - 4115) > 5) + sErrors += " Flip horizontal wrong position."; + + CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf126060_3D_Z_Rotation) +{ + // The document contains one textbox with inside overflowed text + // and the text has 3D z rotation. When we open the document we + // should see the text vertically and rotated from text bound center not text box. + + const OUString sFileName("tdf126060_3D_Z_Rotation.pptx"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. + + uno::Reference<drawing::XShape> xShape(getShape(0)); + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + + if (rSdrObjCustomShape.GetCameraZRotation() != 90) + sErrors += "Wrong text camera Z rotation"; + + basegfx::B2DHomMatrix aObjectTransform; + basegfx::B2DPolyPolygon aObjectPolyPolygon; + rSdrObjCustomShape.TRGetBaseGeometry(aObjectTransform, aObjectPolyPolygon); + + if (aObjectTransform.get(0, 0) != 1492 || aObjectTransform.get(0, 1) != 0 + || aObjectTransform.get(0, 2) != 1129 || aObjectTransform.get(1, 0) != 0 + || aObjectTransform.get(1, 1) != 2500 || aObjectTransform.get(1, 2) != 5846) + sErrors += " Wrong transformation matrix"; + + CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Asymmetric) +{ + // The document contains a shapes with vertical flip and text frame asymmetrical + // to shape. The shape has not stroke and no fill, so that the bounding box surrounds + // the text and therefore equals approximately the text frame. + // Error was, that the 180deg text rotation was not compensated for the position of + // the flipped text box. + const OUString sFileName("tdf127785_asymmetricTextBoxFlipV.odg"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. + + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + const sal_Int32 nLeft = aBoundRect.X; + const sal_Int32 nTop = aBoundRect.Y; + const sal_Int32 nRight = aBoundRect.X + aBoundRect.Width - 1; + const sal_Int32 nBottom = aBoundRect.Y + aBoundRect.Height - 1; + if (abs(nLeft - 10034) > 5) + sErrors += "wrong left"; + if (abs(nRight - 12973) > 5) + sErrors += " wrong right"; + if (abs(nTop - 7892) > 5) + sErrors += " wrong top"; + if (abs(nBottom - 14884) > 5) + sErrors += " wrong bottom"; + + CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_TextRotateAngle) +{ + // The document contains a shapes with vertical flip and a text frame with own + // rotate angle. The shape has not stroke and no fill, so that the bounding box + // surrounds the text and therefore equals approximately the text frame. + // Error was, that the compensation for the 180° rotation added for vertical + // flip were not made to the text box position but to the text matrix. + const OUString sFileName("tdf127785_TextRotateAngle.odp"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. + + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aBoundRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; + const sal_Int32 nLeft = aBoundRect.X; + const sal_Int32 nTop = aBoundRect.Y; + const sal_Int32 nRight = aBoundRect.X + aBoundRect.Width - 1; + const sal_Int32 nBottom = aBoundRect.Y + aBoundRect.Height - 1; + if (abs(nLeft - 5054) > 5) + sErrors += "wrong left"; + if (abs(nRight - 6374) > 5) + sErrors += " wrong right"; + if (abs(nTop - 4516) > 5) + sErrors += " wrong top"; + if (abs(nBottom - 8930) > 5) + sErrors += " wrong bottom"; + + CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf128413_tbrlOnOff) +{ + // The document contains a rotated shape with text. The error was, that switching + // tb-rl writing-mode on, changed the shape size and position. + + const OUString sFileName("tdf128413_tbrl_OnOff.odp"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + awt::Rectangle aOrigRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aOrigRect; + + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + rSdrObjCustomShape.SetVerticalWriting(true); + + awt::Rectangle aObservedRect; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aObservedRect; + OUString sError; + if (aOrigRect.Width != aObservedRect.Width || aOrigRect.Height != aObservedRect.Height + || aOrigRect.X != aObservedRect.X || aOrigRect.Y != aObservedRect.Y) + { + sError = "Shape has wrong size or wrong position."; + } + CPPUNIT_ASSERT_EQUAL(OUString(), sError); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf129532_MatrixFlipV) +{ + // The document contains two rotated shapes with the same geometry. For one of them + // "matrix(1 0 0 -1 0cm 0cm)" was manually added to the value of the draw:transform + // attribute. That should result in mirroring on the x-axis. Error was, that the lines + // which are drawn on the shape rectangle were mirrored, but not the rectangle itself. + // The rectangle was only shifted. + const OUString sFileName("tdf129532_MatrixFlipV.odg"); + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. + + uno::Reference<drawing::XShape> xShape0(getShape(0)); + uno::Reference<beans::XPropertySet> xShape0Props(xShape0, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShape0Props.is()); + awt::Rectangle aBoundRect0; + xShape0Props->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect0; + + uno::Reference<drawing::XShape> xShape1(getShape(1)); + uno::Reference<beans::XPropertySet> xShape1Props(xShape1, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShape1Props.is()); + awt::Rectangle aBoundRect1; + xShape1Props->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect1; + + // The size of the two BoundRect rectangles are the same in case of correct + // vertical mirroring. + if (aBoundRect0.Width != aBoundRect1.Width) + { + sErrors += "\n Width expected: " + OUString::number(aBoundRect1.Width) + + " actual: " + OUString::number(aBoundRect0.Width); + } + if (aBoundRect0.Height != aBoundRect1.Height) + { + sErrors += "\n Height expected: " + OUString::number(aBoundRect1.Height) + + " actual: " + OUString::number(aBoundRect0.Height); + } + CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf103474_commandT_CaseZeroHeight) +{ + // tdf103474 custom shape with command T to create quater ellipses in a bracket, + // corner case where the ellipse has zero height. + // Error was, that the calculation of the circle angle from the ellipse + // angle results in a wrong angle for the case 180° and height zero. + OUString sURL + = m_directories.getURLFromSrc(sDataDirectory) + "tdf103474_commandT_CaseZeroHeight.odp"; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + uno::Reference<drawing::XShape> xShape(getShape(0)); + // The end points of the straight line segment should have the same x-coordinate of left + // of shape, and different y-coordinates, one top and the other bottom of the shape. + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); + SdrPathObj* pPathObj = static_cast<SdrPathObj*>(aCustomShape2d.CreateLineGeometry()); + CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); + const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); + CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast<sal_uInt32>(1), + aPolyPolygon.count()); + const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); + // Get the middle points of the polygon. They are the endpoints of the + // straight line segment regardless of the quarter ellipse parts, because + // the shape is symmetric. + const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(aPolygon.count() / 2 - 1)); + const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() / 2)); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart x-coordinate", 13999.0, aStart.getX(), 1.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd x-coordinate", 13999.0, aEnd.getX(), 1.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart y-coordinate", 9999.0, aStart.getY(), 1.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd y-coordinate", 1999.0, aEnd.getY(), 1.0); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf103474_commandG_CaseZeroHeight) +{ + // Some as above, but with shape with command G. + OUString sURL + = m_directories.getURLFromSrc(sDataDirectory) + "tdf103474_commandG_CaseZeroHeight.odp"; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + uno::Reference<drawing::XShape> xShape(getShape(0)); + // The end points of the straight line segment should have the same x-coordinate of left + // of shape, and different y-coordinates, one top and the other bottom of the shape. + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); + SdrPathObj* pPathObj = static_cast<SdrPathObj*>(aCustomShape2d.CreateLineGeometry()); + CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); + const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); + CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast<sal_uInt32>(1), + aPolyPolygon.count()); + const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); + // Get the middle points of the polygon. They are the endpoints of the + // straight line segment regardless of the quarter ellipse parts, because + // the shape is symmetric. + const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(aPolygon.count() / 2 - 1)); + const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() / 2)); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart x-coordinate", 1999.0, aStart.getX(), 1.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd x-coordinate", 1999.0, aEnd.getX(), 1.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart y-coordinate", 9999.0, aStart.getY(), 1.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd y-coordinate", 1999.0, aEnd.getY(), 1.0); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf122323_largeSwingAngle) +{ + // SwingAngles are clamped to [-360;360] in MS Office. Error was, that LO calculated + // the end angle and used it modulo 360, no full ellipse was drawn. + OUString sURL + = m_directories.getURLFromSrc(sDataDirectory) + "tdf122323_swingAngle_larger360deg.pptx"; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + uno::Reference<drawing::XShape> xShape(getShape(0)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); + SdrPathObj* pPathObj = static_cast<SdrPathObj*>(aCustomShape2d.CreateLineGeometry()); + CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); + const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); + const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); + const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(0)); + // last point comes from line to center, therefore -2 instead of -1 + const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() - 2)); + CPPUNIT_ASSERT_EQUAL_MESSAGE("Start <> End", aStart, aEnd); +} + +CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf136176) +{ + // Error was, that fObjectRotation was not correctly updated after shearing. + // The problem becomes visible after save and reload. + OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf136176_rot30_flip.odg"; + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); + + for (sal_uInt16 i = 0; i < 3; i++) + { + // get shape + uno::Reference<drawing::XShape> xShape(getShape(i)); + SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + // apply shearing 20deg + const Point aCenter = rSdrObjCustomShape.GetSnapRect().Center(); + rSdrObjCustomShape.Shear(aCenter, 2000, tan(basegfx::deg2rad(20.0)), false); + } + + // Save and reload + uno::Reference<frame::XStorable> xStorable(mxComponent, uno::UNO_QUERY); + utl::TempFile aTempFile; + utl::MediaDescriptor aMediaDescriptor; + aMediaDescriptor["FilterName"] <<= OUString("draw8"); + xStorable->storeToURL(aTempFile.GetURL(), aMediaDescriptor.getAsConstPropertyValueList()); + mxComponent->dispose(); + mxComponent = loadFromDesktop(aTempFile.GetURL()); + + // Expected values of point 4 of the shape polygon + const OString sTestCase[] = { "FlipH", "FlipV", "FlipHV" }; + const double fX[] = { 14981.0, 3849.0, 15214.0 }; + const double fY[] = { 9366.0, 16464.0, 23463.0 }; + + // Verify correct positions + for (sal_uInt16 i = 0; i < 3; i++) + { + // Get shape + const uno::Reference<drawing::XShape> xShape(getShape(i)); + const SdrObjCustomShape& rSdrObjCustomShape( + static_cast<SdrObjCustomShape&>(*GetSdrObjectFromXShape(xShape))); + // Create polygon from shape and examine point 4 of the polygon + const basegfx::B2DPolyPolygon aLineGeometry = rSdrObjCustomShape.GetLineGeometry(false); + const basegfx::B2DPoint aPoint(aLineGeometry.getB2DPolygon(0).getB2DPoint(4)); + // Allow some tolerance for rounding errors + if (fabs(aPoint.getX() - fX[i]) > 2.0 || fabs(aPoint.getY() - fY[i]) > 2.0) + { + CPPUNIT_ASSERT_EQUAL_MESSAGE(sTestCase[i].getStr(), aPoint, + basegfx::B2DPoint(fX[i], fY[i])); + } + } +} +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |