diff options
Diffstat (limited to '')
| -rw-r--r-- | svx/source/dialog/connctrl.cxx | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/svx/source/dialog/connctrl.cxx b/svx/source/dialog/connctrl.cxx new file mode 100644 index 000000000..b3006fe24 --- /dev/null +++ b/svx/source/dialog/connctrl.cxx @@ -0,0 +1,310 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <vcl/svapp.hxx> + +#include <svx/connctrl.hxx> +#include <svx/dlgutil.hxx> + +#include <svx/sdr/contact/displayinfo.hxx> +#include <sdr/contact/objectcontactofobjlistpainter.hxx> +#include <svx/svdmark.hxx> +#include <svx/svdoedge.hxx> +#include <svx/svdpage.hxx> +#include <svx/svdview.hxx> +#include <svx/sxelditm.hxx> + +#include <vcl/settings.hxx> +#include <memory> + +SvxXConnectionPreview::SvxXConnectionPreview() + : pEdgeObj(nullptr) + , pView(nullptr) +{ + SetMapMode(MapMode(MapUnit::Map100thMM)); +} + +void SvxXConnectionPreview::SetDrawingArea(weld::DrawingArea* pDrawingArea) +{ + weld::CustomWidgetController::SetDrawingArea(pDrawingArea); + Size aSize(pDrawingArea->get_ref_device().LogicToPixel(Size(118 , 121), MapMode(MapUnit::MapAppFont))); + pDrawingArea->set_size_request(aSize.Width(), aSize.Height()); + SetOutputSizePixel(aSize); +} + +SvxXConnectionPreview::~SvxXConnectionPreview() +{ +} + +void SvxXConnectionPreview::Resize() +{ + AdaptSize(); + + Invalidate(); +} + +void SvxXConnectionPreview::AdaptSize() +{ + // Adapt size + if( !pSdrPage ) + return; + + SetMapMode(MapMode(MapUnit::Map100thMM)); + + OutputDevice* pOD = pView->GetFirstOutputDevice(); // GetWin( 0 ); + tools::Rectangle aRect = pSdrPage->GetAllObjBoundRect(); + + MapMode aMapMode = GetMapMode(); + aMapMode.SetMapUnit( pOD->GetMapMode().GetMapUnit() ); + SetMapMode( aMapMode ); + + MapMode aDisplayMap( aMapMode ); + Point aNewPos; + Size aNewSize; + const Size aWinSize = GetDrawingArea()->get_ref_device().PixelToLogic(GetOutputSizePixel(), aDisplayMap); + const long nWidth = aWinSize.Width(); + const long nHeight = aWinSize.Height(); + if (aRect.GetHeight() == 0) + return; + double fRectWH = static_cast<double>(aRect.GetWidth()) / aRect.GetHeight(); + if (nHeight == 0) + return; + double fWinWH = static_cast<double>(nWidth) / nHeight; + + // Adapt bitmap to Thumb size (not here!) + if ( fRectWH < fWinWH) + { + aNewSize.setWidth( static_cast<long>( static_cast<double>(nHeight) * fRectWH ) ); + aNewSize.setHeight( nHeight ); + } + else + { + aNewSize.setWidth( nWidth ); + aNewSize.setHeight( static_cast<long>( static_cast<double>(nWidth) / fRectWH ) ); + } + + Fraction aFrac1( aWinSize.Width(), aRect.GetWidth() ); + Fraction aFrac2( aWinSize.Height(), aRect.GetHeight() ); + Fraction aMinFrac( aFrac1 <= aFrac2 ? aFrac1 : aFrac2 ); + + // Implement MapMode + aDisplayMap.SetScaleX( aMinFrac ); + aDisplayMap.SetScaleY( aMinFrac ); + + // Centering + aNewPos.setX( ( nWidth - aNewSize.Width() ) >> 1 ); + aNewPos.setY( ( nHeight - aNewSize.Height() ) >> 1 ); + + aDisplayMap.SetOrigin(OutputDevice::LogicToLogic(aNewPos, aMapMode, aDisplayMap)); + SetMapMode( aDisplayMap ); + + // Origin + aNewPos = aDisplayMap.GetOrigin(); + aNewPos -= Point( aRect.TopLeft().X(), aRect.TopLeft().Y() ); + aDisplayMap.SetOrigin( aNewPos ); + SetMapMode( aDisplayMap ); + + MouseEvent aMEvt( Point(), 1, MouseEventModifiers::NONE, MOUSE_RIGHT ); + MouseButtonDown( aMEvt ); +} + +void SvxXConnectionPreview::Construct() +{ + DBG_ASSERT( pView, "No valid view is passed on! "); + + const SdrMarkList& rMarkList = pView->GetMarkedObjectList(); + const size_t nMarkCount = rMarkList.GetMarkCount(); + + if( nMarkCount >= 1 ) + { + bool bFound = false; + + for( size_t i = 0; i < nMarkCount && !bFound; ++i ) + { + const SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj(); + SdrInventor nInv = pObj->GetObjInventor(); + sal_uInt16 nId = pObj->GetObjIdentifier(); + if( nInv == SdrInventor::Default && nId == OBJ_EDGE ) + { + bFound = true; + + // potential memory leak here (!). Create SdrObjList only when there is + // not yet one. + if(!pSdrPage) + { + pSdrPage.reset( new SdrPage( + pView->getSdrModelFromSdrView(), + false) ); + } + + const SdrEdgeObj* pTmpEdgeObj = static_cast<const SdrEdgeObj*>(pObj); + pEdgeObj = pTmpEdgeObj->CloneSdrObject(pSdrPage->getSdrModelFromSdrPage()); + + SdrObjConnection& rConn1 = pEdgeObj->GetConnection( true ); + SdrObjConnection& rConn2 = pEdgeObj->GetConnection( false ); + + rConn1 = pTmpEdgeObj->GetConnection( true ); + rConn2 = pTmpEdgeObj->GetConnection( false ); + + SdrObject* pTmpObj1 = pTmpEdgeObj->GetConnectedNode( true ); + SdrObject* pTmpObj2 = pTmpEdgeObj->GetConnectedNode( false ); + + if( pTmpObj1 ) + { + SdrObject* pObj1 = pTmpObj1->CloneSdrObject(pSdrPage->getSdrModelFromSdrPage()); + pSdrPage->InsertObject( pObj1 ); + pEdgeObj->ConnectToNode( true, pObj1 ); + } + + if( pTmpObj2 ) + { + SdrObject* pObj2 = pTmpObj2->CloneSdrObject(pSdrPage->getSdrModelFromSdrPage()); + pSdrPage->InsertObject( pObj2 ); + pEdgeObj->ConnectToNode( false, pObj2 ); + } + + pSdrPage->InsertObject( pEdgeObj ); + } + } + } + + if( !pEdgeObj ) + { + pEdgeObj = new SdrEdgeObj(pView->getSdrModelFromSdrView()); + } + + AdaptSize(); +} + +void SvxXConnectionPreview::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle&) +{ + rRenderContext.Push(PushFlags::ALL); + + rRenderContext.SetMapMode(GetMapMode()); + + const StyleSettings& rStyles = Application::GetSettings().GetStyleSettings(); + rRenderContext.SetDrawMode(rStyles.GetHighContrastMode() ? OUTPUT_DRAWMODE_CONTRAST : OUTPUT_DRAWMODE_COLOR); + rRenderContext.SetBackground(Wallpaper(rStyles.GetFieldColor())); + + if (pSdrPage) + { + // This will not work anymore. To not start at Adam and Eve, i will + // ATM not try to change all this stuff to really using an own model + // and a view. I will just try to provide a mechanism to paint such + // objects without own model and without a page/view with the new + // mechanism. + + // New stuff: Use an ObjectContactOfObjListPainter. + sdr::contact::SdrObjectVector aObjectVector; + + for (size_t a = 0; a < pSdrPage->GetObjCount(); ++a) + { + SdrObject* pObject = pSdrPage->GetObj(a); + DBG_ASSERT(pObject, + "SvxXConnectionPreview::Paint: Corrupt ObjectList (!)"); + aObjectVector.push_back(pObject); + } + + sdr::contact::ObjectContactOfObjListPainter aPainter(rRenderContext, aObjectVector, nullptr); + sdr::contact::DisplayInfo aDisplayInfo; + + // do processing + aPainter.ProcessDisplay(aDisplayInfo); + } + + rRenderContext.Pop(); +} + +void SvxXConnectionPreview::SetAttributes( const SfxItemSet& rInAttrs ) +{ + pEdgeObj->SetMergedItemSetAndBroadcast(rInAttrs); + + Invalidate(); +} + +// Get number of lines which are offset based on the preview object + +sal_uInt16 SvxXConnectionPreview::GetLineDeltaCount() const +{ + const SfxItemSet& rSet = pEdgeObj->GetMergedItemSet(); + sal_uInt16 nCount(0); + + if(SfxItemState::DONTCARE != rSet.GetItemState(SDRATTR_EDGELINEDELTACOUNT)) + nCount = rSet.Get(SDRATTR_EDGELINEDELTACOUNT).GetValue(); + + return nCount; +} + +bool SvxXConnectionPreview::MouseButtonDown( const MouseEvent& rMEvt ) +{ + bool bZoomIn = rMEvt.IsLeft() && !rMEvt.IsShift(); + bool bZoomOut = rMEvt.IsRight() || rMEvt.IsShift(); + bool bCtrl = rMEvt.IsMod1(); + + if( bZoomIn || bZoomOut ) + { + MapMode aMapMode = GetMapMode(); + Fraction aXFrac = aMapMode.GetScaleX(); + Fraction aYFrac = aMapMode.GetScaleY(); + std::unique_ptr<Fraction> pMultFrac; + + if( bZoomIn ) + { + if( bCtrl ) + pMultFrac.reset(new Fraction( 3, 2 )); + else + pMultFrac.reset(new Fraction( 11, 10 )); + } + else + { + if( bCtrl ) + pMultFrac.reset(new Fraction( 2, 3 )); + else + pMultFrac.reset(new Fraction( 10, 11 )); + } + + aXFrac *= *pMultFrac; + aYFrac *= *pMultFrac; + if( static_cast<double>(aXFrac) > 0.001 && static_cast<double>(aXFrac) < 1000.0 && + static_cast<double>(aYFrac) > 0.001 && static_cast<double>(aYFrac) < 1000.0 ) + { + aMapMode.SetScaleX( aXFrac ); + aMapMode.SetScaleY( aYFrac ); + SetMapMode( aMapMode ); + + Size aOutSize(GetOutputSizePixel()); + aOutSize = GetDrawingArea()->get_ref_device().PixelToLogic(aOutSize); + + Point aPt( aMapMode.GetOrigin() ); + long nX = static_cast<long>( ( static_cast<double>(aOutSize.Width()) - ( static_cast<double>(aOutSize.Width()) * static_cast<double>(*pMultFrac) ) ) / 2.0 + 0.5 ); + long nY = static_cast<long>( ( static_cast<double>(aOutSize.Height()) - ( static_cast<double>(aOutSize.Height()) * static_cast<double>(*pMultFrac) ) ) / 2.0 + 0.5 ); + aPt.AdjustX(nX ); + aPt.AdjustY(nY ); + + aMapMode.SetOrigin( aPt ); + SetMapMode( aMapMode ); + + Invalidate(); + } + } + + return true; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |