diff options
Diffstat (limited to '')
| -rw-r--r-- | tools/source/generic/poly2.cxx | 494 |
1 files changed, 494 insertions, 0 deletions
diff --git a/tools/source/generic/poly2.cxx b/tools/source/generic/poly2.cxx new file mode 100644 index 000000000..d37ba809f --- /dev/null +++ b/tools/source/generic/poly2.cxx @@ -0,0 +1,494 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <sal/log.hxx> +#include <osl/diagnose.h> +#include <poly.h> +#include <tools/poly.hxx> +#include <tools/debug.hxx> +#include <tools/stream.hxx> +#include <tools/vcompat.hxx> +#include <tools/gen.hxx> +#include <basegfx/polygon/b2dpolypolygon.hxx> +#include <basegfx/polygon/b2dpolypolygoncutter.hxx> + +namespace tools { + +PolyPolygon::PolyPolygon( sal_uInt16 nInitSize ) + : mpImplPolyPolygon( ImplPolyPolygon( nInitSize ) ) +{ +} + +PolyPolygon::PolyPolygon( const tools::Polygon& rPoly ) + : mpImplPolyPolygon( rPoly ) +{ +} + +PolyPolygon::PolyPolygon( const tools::PolyPolygon& rPolyPoly ) + : mpImplPolyPolygon( rPolyPoly.mpImplPolyPolygon ) +{ +} + +PolyPolygon::PolyPolygon( tools::PolyPolygon&& rPolyPoly ) noexcept + : mpImplPolyPolygon( std::move(rPolyPoly.mpImplPolyPolygon) ) +{ +} + +PolyPolygon::~PolyPolygon() +{ +} + +void PolyPolygon::Insert( const tools::Polygon& rPoly, sal_uInt16 nPos ) +{ + assert ( mpImplPolyPolygon->mvPolyAry.size() < MAX_POLYGONS ); + + if ( nPos > mpImplPolyPolygon->mvPolyAry.size() ) + nPos = mpImplPolyPolygon->mvPolyAry.size(); + + mpImplPolyPolygon->mvPolyAry.insert(mpImplPolyPolygon->mvPolyAry.begin() + nPos, rPoly); +} + +void PolyPolygon::Remove( sal_uInt16 nPos ) +{ + assert(nPos < Count() && "PolyPolygon::Remove(): nPos >= nSize"); + + mpImplPolyPolygon->mvPolyAry.erase(mpImplPolyPolygon->mvPolyAry.begin() + nPos); +} + +void PolyPolygon::Replace( const tools::Polygon& rPoly, sal_uInt16 nPos ) +{ + assert(nPos < Count() && "PolyPolygon::Replace(): nPos >= nSize"); + + mpImplPolyPolygon->mvPolyAry[nPos] = rPoly; +} + +const tools::Polygon& PolyPolygon::GetObject( sal_uInt16 nPos ) const +{ + assert(nPos < Count() && "PolyPolygon::GetObject(): nPos >= nSize"); + + return mpImplPolyPolygon->mvPolyAry[nPos]; +} + +bool PolyPolygon::IsRect() const +{ + bool bIsRect = false; + if ( Count() == 1 ) + bIsRect = mpImplPolyPolygon->mvPolyAry[ 0 ].IsRect(); + return bIsRect; +} + +void PolyPolygon::Clear() +{ + mpImplPolyPolygon->mvPolyAry.clear(); +} + +void PolyPolygon::Optimize( PolyOptimizeFlags nOptimizeFlags ) +{ + if(bool(nOptimizeFlags) && Count()) + { + // #115630# ImplDrawHatch does not work with beziers included in the polypolygon, take care of that + bool bIsCurve(false); + + for(sal_uInt16 a(0); !bIsCurve && a < Count(); a++) + { + if((*this)[a].HasFlags()) + { + bIsCurve = true; + } + } + + if(bIsCurve) + { + OSL_ENSURE(false, "Optimize does *not* support curves, falling back to AdaptiveSubdivide()..."); + tools::PolyPolygon aPolyPoly; + + AdaptiveSubdivide(aPolyPoly); + aPolyPoly.Optimize(nOptimizeFlags); + *this = aPolyPoly; + } + else + { + double fArea; + const bool bEdges = ( nOptimizeFlags & PolyOptimizeFlags::EDGES ) == PolyOptimizeFlags::EDGES; + sal_uInt16 nPercent = 0; + + if( bEdges ) + { + const tools::Rectangle aBound( GetBoundRect() ); + + fArea = ( aBound.GetWidth() + aBound.GetHeight() ) * 0.5; + nPercent = 50; + nOptimizeFlags &= ~PolyOptimizeFlags::EDGES; + } + + // Optimize polygons + for( sal_uInt16 i = 0, nPolyCount = mpImplPolyPolygon->mvPolyAry.size(); i < nPolyCount; i++ ) + { + if( bEdges ) + { + mpImplPolyPolygon->mvPolyAry[ i ].Optimize( PolyOptimizeFlags::NO_SAME ); + tools::Polygon::ImplReduceEdges( mpImplPolyPolygon->mvPolyAry[ i ], fArea, nPercent ); + } + + if( bool(nOptimizeFlags) ) + mpImplPolyPolygon->mvPolyAry[ i ].Optimize( nOptimizeFlags ); + } + } + } +} + +void PolyPolygon::AdaptiveSubdivide( tools::PolyPolygon& rResult ) const +{ + rResult.Clear(); + + tools::Polygon aPolygon; + + for( size_t i = 0; i < mpImplPolyPolygon->mvPolyAry.size(); i++ ) + { + mpImplPolyPolygon->mvPolyAry[ i ].AdaptiveSubdivide( aPolygon, 1.0 ); + rResult.Insert( aPolygon ); + } +} + +tools::PolyPolygon PolyPolygon::SubdivideBezier( const tools::PolyPolygon& rPolyPoly ) +{ + sal_uInt16 i, nPolys = rPolyPoly.Count(); + tools::PolyPolygon aPolyPoly( nPolys ); + for( i=0; i<nPolys; ++i ) + aPolyPoly.Insert( tools::Polygon::SubdivideBezier( rPolyPoly.GetObject(i) ) ); + + return aPolyPoly; +} + + +void PolyPolygon::GetIntersection( const tools::PolyPolygon& rPolyPoly, tools::PolyPolygon& rResult ) const +{ + ImplDoOperation( rPolyPoly, rResult, PolyClipOp::INTERSECT ); +} + +void PolyPolygon::GetUnion( const tools::PolyPolygon& rPolyPoly, tools::PolyPolygon& rResult ) const +{ + ImplDoOperation( rPolyPoly, rResult, PolyClipOp::UNION ); +} + +void PolyPolygon::ImplDoOperation( const tools::PolyPolygon& rPolyPoly, tools::PolyPolygon& rResult, PolyClipOp nOperation ) const +{ + // Convert to B2DPolyPolygon, temporarily. It might be + // advantageous in the future, to have a tools::PolyPolygon adaptor that + // just simulates a B2DPolyPolygon here... + basegfx::B2DPolyPolygon aMergePolyPolygonA( getB2DPolyPolygon() ); + basegfx::B2DPolyPolygon aMergePolyPolygonB( rPolyPoly.getB2DPolyPolygon() ); + + // normalize the two polypolygons before. Force properly oriented + // polygons. + aMergePolyPolygonA = basegfx::utils::prepareForPolygonOperation( aMergePolyPolygonA ); + aMergePolyPolygonB = basegfx::utils::prepareForPolygonOperation( aMergePolyPolygonB ); + + switch( nOperation ) + { + // All code extracted from svx/source/svdraw/svedtv2.cxx + + case PolyClipOp::UNION: + { + // merge A and B (OR) + aMergePolyPolygonA = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonA, aMergePolyPolygonB); + break; + } + + default: + case PolyClipOp::INTERSECT: + { + // cut poly 1 against polys 2..n (AND) + aMergePolyPolygonA = basegfx::utils::solvePolygonOperationAnd(aMergePolyPolygonA, aMergePolyPolygonB); + break; + } + } + + rResult = tools::PolyPolygon( aMergePolyPolygonA ); +} + +sal_uInt16 PolyPolygon::Count() const +{ + return mpImplPolyPolygon->mvPolyAry.size(); +} + +void PolyPolygon::Move( long nHorzMove, long nVertMove ) +{ + // Required for DrawEngine + if( nHorzMove || nVertMove ) + { + // move points + sal_uInt16 nPolyCount = mpImplPolyPolygon->mvPolyAry.size(); + for ( sal_uInt16 i = 0; i < nPolyCount; i++ ) + mpImplPolyPolygon->mvPolyAry[i].Move( nHorzMove, nVertMove ); + } +} + +void PolyPolygon::Translate( const Point& rTrans ) +{ + // move points + for ( sal_uInt16 i = 0, nCount = mpImplPolyPolygon->mvPolyAry.size(); i < nCount; i++ ) + mpImplPolyPolygon->mvPolyAry[ i ].Translate( rTrans ); +} + +void PolyPolygon::Scale( double fScaleX, double fScaleY ) +{ + // Move points + for ( sal_uInt16 i = 0, nCount = mpImplPolyPolygon->mvPolyAry.size(); i < nCount; i++ ) + mpImplPolyPolygon->mvPolyAry[ i ].Scale( fScaleX, fScaleY ); +} + +void PolyPolygon::Rotate( const Point& rCenter, sal_uInt16 nAngle10 ) +{ + nAngle10 %= 3600; + + if( nAngle10 ) + { + const double fAngle = F_PI1800 * nAngle10; + Rotate( rCenter, sin( fAngle ), cos( fAngle ) ); + } +} + +void PolyPolygon::Rotate( const Point& rCenter, double fSin, double fCos ) +{ + // move points + for ( sal_uInt16 i = 0, nCount = mpImplPolyPolygon->mvPolyAry.size(); i < nCount; i++ ) + mpImplPolyPolygon->mvPolyAry[ i ].Rotate( rCenter, fSin, fCos ); +} + +void PolyPolygon::Clip( const tools::Rectangle& rRect ) +{ + sal_uInt16 nPolyCount = mpImplPolyPolygon->mvPolyAry.size(); + sal_uInt16 i; + + if ( !nPolyCount ) + return; + + // Clip every polygon, deleting the empty ones + for ( i = 0; i < nPolyCount; i++ ) + mpImplPolyPolygon->mvPolyAry[i].Clip( rRect ); + while ( nPolyCount ) + { + if ( GetObject( nPolyCount-1 ).GetSize() <= 2 ) + Remove( nPolyCount-1 ); + nPolyCount--; + } +} + +tools::Rectangle PolyPolygon::GetBoundRect() const +{ + long nXMin=0, nXMax=0, nYMin=0, nYMax=0; + bool bFirst = true; + sal_uInt16 nPolyCount = mpImplPolyPolygon->mvPolyAry.size(); + + for ( sal_uInt16 n = 0; n < nPolyCount; n++ ) + { + const tools::Polygon* pPoly = &mpImplPolyPolygon->mvPolyAry[n]; + const Point* pAry = pPoly->GetConstPointAry(); + sal_uInt16 nPointCount = pPoly->GetSize(); + + for ( sal_uInt16 i = 0; i < nPointCount; i++ ) + { + const Point* pPt = &pAry[ i ]; + + if ( bFirst ) + { + nXMin = nXMax = pPt->X(); + nYMin = nYMax = pPt->Y(); + bFirst = false; + } + else + { + if ( pPt->X() < nXMin ) + nXMin = pPt->X(); + if ( pPt->X() > nXMax ) + nXMax = pPt->X(); + if ( pPt->Y() < nYMin ) + nYMin = pPt->Y(); + if ( pPt->Y() > nYMax ) + nYMax = pPt->Y(); + } + } + } + + if ( !bFirst ) + return tools::Rectangle( nXMin, nYMin, nXMax, nYMax ); + else + return tools::Rectangle(); +} + +Polygon& PolyPolygon::operator[]( sal_uInt16 nPos ) +{ + assert(nPos < Count() && "PolyPolygon::[](): nPos >= nSize"); + + return mpImplPolyPolygon->mvPolyAry[nPos]; +} + +PolyPolygon& PolyPolygon::operator=( const tools::PolyPolygon& rPolyPoly ) +{ + mpImplPolyPolygon = rPolyPoly.mpImplPolyPolygon; + return *this; +} + +PolyPolygon& PolyPolygon::operator=( tools::PolyPolygon&& rPolyPoly ) noexcept +{ + mpImplPolyPolygon = std::move(rPolyPoly.mpImplPolyPolygon); + return *this; +} + +bool PolyPolygon::operator==( const tools::PolyPolygon& rPolyPoly ) const +{ + return rPolyPoly.mpImplPolyPolygon == mpImplPolyPolygon; +} + +SvStream& ReadPolyPolygon( SvStream& rIStream, tools::PolyPolygon& rPolyPoly ) +{ + sal_uInt16 nPolyCount(0); + + // Read number of polygons + rIStream.ReadUInt16( nPolyCount ); + + const size_t nMinRecordSize = sizeof(sal_uInt16); + const size_t nMaxRecords = rIStream.remainingSize() / nMinRecordSize; + if (nPolyCount > nMaxRecords) + { + SAL_WARN("tools", "Parsing error: " << nMaxRecords << + " max possible entries, but " << nPolyCount << " claimed, truncating"); + nPolyCount = nMaxRecords; + } + + if( nPolyCount ) + { + rPolyPoly.mpImplPolyPolygon->mvPolyAry.resize(nPolyCount); + + tools::Polygon aTempPoly; + for ( sal_uInt16 i = 0; i < nPolyCount; i++ ) + { + ReadPolygon( rIStream, aTempPoly ); + rPolyPoly.mpImplPolyPolygon->mvPolyAry[i] = aTempPoly; + } + } + else + rPolyPoly = tools::PolyPolygon(); + + return rIStream; +} + +SvStream& WritePolyPolygon( SvStream& rOStream, const tools::PolyPolygon& rPolyPoly ) +{ + // Write number of polygons + sal_uInt16 nPolyCount = rPolyPoly.mpImplPolyPolygon->mvPolyAry.size(); + rOStream.WriteUInt16( nPolyCount ); + + // output polygons + for ( sal_uInt16 i = 0; i < nPolyCount; i++ ) + WritePolygon( rOStream, rPolyPoly.mpImplPolyPolygon->mvPolyAry[i] ); + + return rOStream; +} + +void PolyPolygon::Read( SvStream& rIStream ) +{ + VersionCompat aCompat( rIStream, StreamMode::READ ); + + sal_uInt16 nPolyCount(0); + + // Read number of polygons + rIStream.ReadUInt16( nPolyCount ); + + const size_t nMinRecordSize = sizeof(sal_uInt16); + const size_t nMaxRecords = rIStream.remainingSize() / nMinRecordSize; + if (nPolyCount > nMaxRecords) + { + SAL_WARN("tools", "Parsing error: " << nMaxRecords << + " max possible entries, but " << nPolyCount << " claimed, truncating"); + nPolyCount = nMaxRecords; + } + + if( nPolyCount ) + { + mpImplPolyPolygon->mvPolyAry.clear(); + + for ( sal_uInt16 i = 0; i < nPolyCount; i++ ) + { + tools::Polygon aTempPoly; + aTempPoly.ImplRead( rIStream ); + mpImplPolyPolygon->mvPolyAry.emplace_back( aTempPoly ); + } + } + else + *this = tools::PolyPolygon(); +} + +void PolyPolygon::Write( SvStream& rOStream ) const +{ + VersionCompat aCompat( rOStream, StreamMode::WRITE, 1 ); + + // Write number of polygons + sal_uInt16 nPolyCount = mpImplPolyPolygon->mvPolyAry.size(); + rOStream.WriteUInt16( nPolyCount ); + + // Output polygons + for ( sal_uInt16 i = 0; i < nPolyCount; i++ ) + mpImplPolyPolygon->mvPolyAry[i].ImplWrite( rOStream ); +} + +// convert to basegfx::B2DPolyPolygon and return +basegfx::B2DPolyPolygon PolyPolygon::getB2DPolyPolygon() const +{ + basegfx::B2DPolyPolygon aRetval; + + for(size_t a(0); a < mpImplPolyPolygon->mvPolyAry.size(); a++) + { + tools::Polygon const & rCandidate = mpImplPolyPolygon->mvPolyAry[a]; + aRetval.append(rCandidate.getB2DPolygon()); + } + + return aRetval; +} + +// constructor to convert from basegfx::B2DPolyPolygon +PolyPolygon::PolyPolygon(const basegfx::B2DPolyPolygon& rPolyPolygon) + : mpImplPolyPolygon(rPolyPolygon) +{ +} + +} /* namespace tools */ + +ImplPolyPolygon::ImplPolyPolygon(const basegfx::B2DPolyPolygon& rPolyPolygon) +{ + const sal_uInt16 nCount(sal_uInt16(rPolyPolygon.count())); + DBG_ASSERT(sal_uInt32(nCount) == rPolyPolygon.count(), + "PolyPolygon::PolyPolygon: Too many sub-polygons in given basegfx::B2DPolyPolygon (!)"); + + if ( nCount ) + { + mvPolyAry.resize( nCount ); + + for(sal_uInt16 a(0); a < nCount; a++) + { + const basegfx::B2DPolygon& aCandidate(rPolyPolygon.getB2DPolygon(sal_uInt32(a))); + mvPolyAry[a] = tools::Polygon( aCandidate ); + } + } + else + mvPolyAry.reserve(16); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |