From 940b4d1848e8c70ab7642901a68594e8016caffc Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 18:51:28 +0200 Subject: Adding upstream version 1:7.0.4. Signed-off-by: Daniel Baumann --- sw/qa/extras/uiwriter/uiwriter2.cxx | 3023 +++++++++++++++++++++++++++++++++++ 1 file changed, 3023 insertions(+) create mode 100644 sw/qa/extras/uiwriter/uiwriter2.cxx (limited to 'sw/qa/extras/uiwriter/uiwriter2.cxx') diff --git a/sw/qa/extras/uiwriter/uiwriter2.cxx b/sw/qa/extras/uiwriter/uiwriter2.cxx new file mode 100644 index 000000000..1354244a8 --- /dev/null +++ b/sw/qa/extras/uiwriter/uiwriter2.cxx @@ -0,0 +1,3023 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + */ + +#include + +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +namespace +{ +char const DATA_DIRECTORY[] = "/sw/qa/extras/uiwriter/data2/"; +char const FLOATING_TABLE_DATA_DIRECTORY[] = "/sw/qa/extras/uiwriter/data/floating_table/"; +} // namespace + +/// Second set of tests asserting the behavior of Writer user interface shells. +class SwUiWriterTest2 : public SwModelTestBase +{ +public: + virtual std::unique_ptr preTest(const char* filename) override + { + m_aSavedSettings = Application::GetSettings(); + if (OString(filename).indexOf("LocaleArabic") != -1) + { + std::unique_ptr pResetter( + new Resetter([this]() { Application::SetSettings(this->m_aSavedSettings); })); + AllSettings aSettings(m_aSavedSettings); + aSettings.SetLanguageTag(LanguageTag("ar")); + Application::SetSettings(aSettings); + return pResetter; + } + return nullptr; + } + +protected: + AllSettings m_aSavedSettings; + SwDoc* createDoc(const char* pName = nullptr); +}; + +SwDoc* SwUiWriterTest2::createDoc(const char* pName) +{ + if (!pName) + loadURL("private:factory/swriter", nullptr); + else + load(DATA_DIRECTORY, pName); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + return pTextDoc->GetDocShell()->GetDoc(); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf47471_paraStyleBackground) +{ + SwDoc* pDoc = createDoc("tdf47471_paraStyleBackground.odt"); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + + CPPUNIT_ASSERT_EQUAL(OUString("00Background"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(sal_Int32(14729933), getProperty(getParagraph(2), "FillColor")); + + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->EndPara(/*bSelect=*/true); + dispatchCommand(mxComponent, ".uno:ResetAttributes", {}); + + // the background color should revert to the color for 00Background style + CPPUNIT_ASSERT_EQUAL(sal_Int32(14605542), getProperty(getParagraph(2), "FillColor")); + // the paragraph style should not be reset + CPPUNIT_ASSERT_EQUAL(OUString("00Background"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("00Background"), + getProperty(getParagraph(3), "ParaStyleName")); + + // Save it and load it back. + reload("writer8", "tdf47471_paraStyleBackgroundRT.odt"); + + CPPUNIT_ASSERT_EQUAL(sal_Int32(14605542), getProperty(getParagraph(2), "FillColor")); + // on round-trip, the paragraph style name was lost + CPPUNIT_ASSERT_EQUAL(OUString("00Background"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("00Background"), + getProperty(getParagraph(3), "ParaStyleName")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdfChangeNumberingListAutoFormat) +{ + createDoc("tdf117923.docx"); + // Ensure that all text portions are calculated before testing. + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + SwViewShell* pViewShell + = pTextDoc->GetDocShell()->GetDoc()->getIDocumentLayoutAccess().GetCurrentViewShell(); + CPPUNIT_ASSERT(pViewShell); + pViewShell->Reformat(); + + xmlDocUniquePtr pXmlDoc = parseLayoutDump(); + + // Check that we actually test the line we need + assertXPathContent(pXmlDoc, "/root/page/body/tab/row/cell/txt[3]", "GHI GHI GHI GHI"); + assertXPath(pXmlDoc, "/root/page/body/tab/row/cell/txt[3]/Special", "nType", + "PortionType::Number"); + assertXPath(pXmlDoc, "/root/page/body/tab/row/cell/txt[3]/Special", "rText", "2."); + // The numbering height was 960 in DOC format. + assertXPath(pXmlDoc, "/root/page/body/tab/row/cell/txt[3]/Special", "nHeight", "220"); + + // tdf#127606: now it's possible to change formatting of numbering + // increase font size (220 -> 260) + dispatchCommand(mxComponent, ".uno:SelectAll", {}); + dispatchCommand(mxComponent, ".uno:Grow", {}); + pViewShell->Reformat(); + discardDumpedLayout(); + pXmlDoc = parseLayoutDump(); + assertXPath(pXmlDoc, "/root/page/body/tab/row/cell/txt[3]/Special", "nHeight", "260"); + + // save it to DOCX + reload("Office Open XML Text", "tdf117923.docx"); + pTextDoc = dynamic_cast(mxComponent.get()); + pViewShell + = pTextDoc->GetDocShell()->GetDoc()->getIDocumentLayoutAccess().GetCurrentViewShell(); + pViewShell->Reformat(); + discardDumpedLayout(); + pXmlDoc = parseLayoutDump(); + // this was 220 + assertXPath(pXmlDoc, "/root/page/body/tab/row/cell/txt[3]/Special", "nHeight", "260"); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf101534) +{ + // Copy the first paragraph of the document. + load(DATA_DIRECTORY, "tdf101534.fodt"); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->EndPara(/*bSelect=*/true); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Copy(); + + // Go to the second paragraph, assert that we have margins as direct + // formatting. + pWrtShell->Down(/*bSelect=*/false); + SfxItemSet aSet(pWrtShell->GetAttrPool(), svl::Items{}); + pWrtShell->GetCurAttr(aSet); + CPPUNIT_ASSERT(aSet.HasItem(RES_LR_SPACE)); + + // Make sure that direct formatting is preserved during paste. + pWrtShell->EndPara(/*bSelect=*/false); + TransferableDataHelper aHelper(pTransfer.get()); + SwTransferable::Paste(*pWrtShell, aHelper); + aSet.ClearItem(); + pWrtShell->GetCurAttr(aSet); + // This failed, direct formatting was lost. + CPPUNIT_ASSERT(aSet.HasItem(RES_LR_SPACE)); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testRedlineMoveInsertInDelete) +{ + loadURL("private:factory/swriter", nullptr); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + SwWrtShell* const pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + + pWrtShell->Insert(" foo"); + pWrtShell->SttEndDoc(true); + pWrtShell->InsertFootnote(""); + CPPUNIT_ASSERT(pWrtShell->IsCursorInFootnote()); + RedlineFlags const mode(pWrtShell->GetRedlineFlags() | RedlineFlags::On); + CPPUNIT_ASSERT(mode & (RedlineFlags::ShowDelete | RedlineFlags::ShowInsert)); + pWrtShell->SetRedlineFlags(mode); + // insert redline + pWrtShell->Insert("bar"); + // first delete redline, logically containing the insert redline + // (note: Word apparently allows similar things...) + pWrtShell->SttEndDoc(true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 1, /*bBasicCall=*/false); + pWrtShell->Delete(); // the footnote + // second delete redline, following the first one + pWrtShell->EndOfSection(false); + pWrtShell->Left(CRSR_SKIP_CHARS, /*bSelect=*/true, 3, /*bBasicCall=*/false); + pWrtShell->Delete(); // "foo" + + // hiding used to copy the 2nd delete redline "foo", but not delete it + pWrtShell->SetRedlineFlags(mode & ~RedlineFlags::ShowDelete); // hide + CPPUNIT_ASSERT_EQUAL( + OUString(" "), + pWrtShell->GetCursor()->GetPoint()->nNode.GetNode().GetTextNode()->GetText()); + pWrtShell->SetRedlineFlags(mode); // show again + CPPUNIT_ASSERT_EQUAL( + OUString(u"\u0001 foo"), + pWrtShell->GetCursor()->GetPoint()->nNode.GetNode().GetTextNode()->GetText()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testRedlineInHiddenSection) +{ + loadURL("private:factory/swriter", nullptr); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + SwWrtShell* const pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + + pWrtShell->SplitNode(); + pWrtShell->Insert("foo"); + pWrtShell->SplitNode(); + pWrtShell->Insert("bar"); + pWrtShell->SplitNode(); + pWrtShell->Insert("baz"); + + RedlineFlags const mode(pWrtShell->GetRedlineFlags() | RedlineFlags::On); + CPPUNIT_ASSERT(mode & (RedlineFlags::ShowDelete | RedlineFlags::ShowInsert)); + pWrtShell->SetRedlineFlags(mode); + + // delete paragraph "bar" + pWrtShell->Left(CRSR_SKIP_CHARS, /*bSelect=*/false, 2, /*bBasicCall=*/false); + pWrtShell->Left(CRSR_SKIP_CHARS, /*bSelect=*/true, 8, /*bBasicCall=*/false); + pWrtShell->Delete(); + + pWrtShell->StartOfSection(); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/false, 1, /*bBasicCall=*/false); + pWrtShell->EndOfSection(true); + + SwSectionData section(SectionType::Content, pWrtShell->GetUniqueSectionName()); + section.SetHidden(true); + SwSection const* pSection = pWrtShell->InsertSection(section, nullptr); + + SwSectionNode const* pNode = pSection->GetFormat()->GetSectionNode(); + + CPPUNIT_ASSERT( + !pNode->GetNodes()[pNode->GetIndex() + 1]->GetTextNode()->getLayoutFrame(nullptr)); + CPPUNIT_ASSERT( + !pNode->GetNodes()[pNode->GetIndex() + 2]->GetTextNode()->getLayoutFrame(nullptr)); + CPPUNIT_ASSERT( + !pNode->GetNodes()[pNode->GetIndex() + 3]->GetTextNode()->getLayoutFrame(nullptr)); + CPPUNIT_ASSERT(pNode->GetNodes()[pNode->GetIndex() + 4]->IsEndNode()); + + pWrtShell->SetRedlineFlags(mode & ~RedlineFlags::ShowDelete); // hide + + CPPUNIT_ASSERT( + !pNode->GetNodes()[pNode->GetIndex() + 1]->GetTextNode()->getLayoutFrame(nullptr)); + CPPUNIT_ASSERT(pNode->GetNodes()[pNode->GetIndex() + 2]->IsEndNode()); + + pWrtShell->SetRedlineFlags(mode); // show again + + CPPUNIT_ASSERT( + !pNode->GetNodes()[pNode->GetIndex() + 1]->GetTextNode()->getLayoutFrame(nullptr)); + // there was a frame created here + CPPUNIT_ASSERT( + !pNode->GetNodes()[pNode->GetIndex() + 2]->GetTextNode()->getLayoutFrame(nullptr)); + CPPUNIT_ASSERT( + !pNode->GetNodes()[pNode->GetIndex() + 3]->GetTextNode()->getLayoutFrame(nullptr)); + CPPUNIT_ASSERT(pNode->GetNodes()[pNode->GetIndex() + 4]->IsEndNode()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testRedlineSplitContentNode) +{ + load(DATA_DIRECTORY, "try2.fodt"); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + SwWrtShell* const pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + + SwViewOption aViewOptions(*pWrtShell->GetViewOptions()); + // these are required so that IsBlank() is true + aViewOptions.SetBlank(true); + aViewOptions.SetViewMetaChars(true); + pWrtShell->ApplyViewOptions(aViewOptions); + + // enable redlining + dispatchCommand(mxComponent, ".uno:TrackChanges", {}); + // hide + dispatchCommand(mxComponent, ".uno:ShowTrackedChanges", {}); + + SwDocShell* const pDocShell = pTextDoc->GetDocShell(); + SwDoc* const pDoc = pDocShell->GetDoc(); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE( + "redlines should be visible", + IDocumentRedlineAccess::IsShowChanges(pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + + pWrtShell->CalcLayout(); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/false, 18, /*bBasicCall=*/false); + pWrtShell->SplitNode(true); + rUndoManager.Undo(); + // crashed + pWrtShell->SplitNode(true); + rUndoManager.Undo(); + rUndoManager.Redo(); + rUndoManager.Undo(); + rUndoManager.Redo(); + rUndoManager.Undo(); + pWrtShell->SplitNode(true); + rUndoManager.Undo(); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf137245) +{ + SwDoc* const pDoc(createDoc()); + SwWrtShell* const pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + SwAutoCorrect corr(*SvxAutoCorrCfg::Get().GetAutoCorrect()); + corr.GetSwFlags().bSetBorder = true; + // sigh, it's a global... err i mean Singleton design pattern *eyeroll* + SvxSwAutoFormatFlags flags(*SwEditShell::GetAutoFormatFlags()); + comphelper::ScopeGuard const g([=]() { SwEditShell::SetAutoFormatFlags(&flags); }); + flags.bSetBorder = true; + SwEditShell::SetAutoFormatFlags(&flags); + + { + SwFormatAnchor anchor(RndStdIds::FLY_AT_PARA); + anchor.SetAnchor(pWrtShell->GetCursor()->GetPoint()); + SfxItemSet flySet(pDoc->GetAttrPool(), + svl::Items{}); + flySet.Put(anchor); + SwFormatFrameSize size(SwFrameSize::Minimum, 1000, 1000); + flySet.Put(size); // set a size, else we get 1 char per line... + SwFrameFormat const* pFly = pWrtShell->NewFlyFrame(flySet, /*bAnchValid=*/true); + CPPUNIT_ASSERT(pFly != nullptr); + } + { + SwFormatAnchor anchor(RndStdIds::FLY_AT_CHAR); + anchor.SetAnchor(pWrtShell->GetCursor()->GetPoint()); + SfxItemSet flySet(pDoc->GetAttrPool(), + svl::Items{}); + flySet.Put(anchor); + SwFormatFrameSize size(SwFrameSize::Minimum, 1000, 1000); + flySet.Put(size); // set a size, else we get 1 char per line... + SwFrameFormat const* pFly = pWrtShell->NewFlyFrame(flySet, /*bAnchValid=*/true); + CPPUNIT_ASSERT(pFly != nullptr); + } + // move cursor back to body + pWrtShell->SttEndDoc(false); + // keep first paragraph empty so that its flys may be deleted too + //pWrtShell->Insert("abc"); + pWrtShell->SplitNode(false); + + { + SwFormatAnchor anchor(RndStdIds::FLY_AT_PARA); + anchor.SetAnchor(pWrtShell->GetCursor()->GetPoint()); + SfxItemSet flySet(pDoc->GetAttrPool(), + svl::Items{}); + flySet.Put(anchor); + SwFormatFrameSize size(SwFrameSize::Minimum, 1000, 1000); + flySet.Put(size); // set a size, else we get 1 char per line... + SwFrameFormat const* pFly = pWrtShell->NewFlyFrame(flySet, /*bAnchValid=*/true); + CPPUNIT_ASSERT(pFly != nullptr); + } + { + SwFormatAnchor anchor(RndStdIds::FLY_AT_CHAR); + anchor.SetAnchor(pWrtShell->GetCursor()->GetPoint()); + SfxItemSet flySet(pDoc->GetAttrPool(), + svl::Items{}); + flySet.Put(anchor); + SwFormatFrameSize size(SwFrameSize::Minimum, 1000, 1000); + flySet.Put(size); // set a size, else we get 1 char per line... + SwFrameFormat const* pFly = pWrtShell->NewFlyFrame(flySet, /*bAnchValid=*/true); + CPPUNIT_ASSERT(pFly != nullptr); + } + + const SwFrameFormats& rFormats = *pDoc->GetSpzFrameFormats(); + CPPUNIT_ASSERT_EQUAL(static_cast(4), rFormats.size()); + + // move cursor back to body + pWrtShell->SttEndDoc(false); + pWrtShell->Insert("---"); + pWrtShell->SplitNode(true); + + CPPUNIT_ASSERT_EQUAL(static_cast(4), rFormats.size()); + + // check that the AutoFormat did something + pWrtShell->SttEndDoc(true); + SfxItemSet set{ pDoc->GetAttrPool(), svl::Items{} }; + pWrtShell->GetCurParAttr(set); + CPPUNIT_ASSERT_EQUAL(SfxItemState::SET, set.GetItemState(RES_BOX, false)); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf132236) +{ + load(DATA_DIRECTORY, "tdf132236.odt"); + + SwXTextDocument* const pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // select everything and delete + SwWrtShell* const pWrtShell(pTextDoc->GetDocShell()->GetWrtShell()); + pWrtShell->Down(true); + pWrtShell->Down(true); + pWrtShell->Down(true); + pWrtShell->Delete(); + SwDoc* const pDoc(pWrtShell->GetDoc()); + sw::UndoManager& rUndoManager(pDoc->GetUndoManager()); + rUndoManager.Undo(); + + // check that the text frames exist inside their sections + xmlDocUniquePtr pXmlDoc = parseLayoutDump(); + assertXPath(pXmlDoc, "/root/page[1]/body/section[1]/txt", 1); + assertXPath(pXmlDoc, "/root/page[1]/body/section[2]/txt", 2); + assertXPath(pXmlDoc, "/root/page[1]/body/txt", 1); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf131912) +{ + SwDoc* const pDoc = createDoc(); + SwWrtShell* const pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + + sw::UnoCursorPointer pCursor( + pDoc->CreateUnoCursor(SwPosition(SwNodeIndex(pDoc->GetNodes().GetEndOfContent(), -1)))); + + pDoc->getIDocumentContentOperations().InsertString(*pCursor, "foo"); + + { + SfxItemSet flySet(pDoc->GetAttrPool(), + svl::Items{}); + SwFormatAnchor anchor(RndStdIds::FLY_AT_CHAR); + pWrtShell->StartOfSection(false); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/false, 2, /*bBasicCall=*/false); + anchor.SetAnchor(pWrtShell->GetCursor()->GetPoint()); + flySet.Put(anchor); + SwFormatFrameSize size(SwFrameSize::Minimum, 1000, 1000); + flySet.Put(size); // set a size, else we get 1 char per line... + SwFrameFormat const* pFly = pWrtShell->NewFlyFrame(flySet, /*bAnchValid=*/true); + CPPUNIT_ASSERT(pFly != nullptr); + } + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + + pCursor->SetMark(); + pCursor->GetMark()->nContent.Assign(pCursor->GetContentNode(), 0); + pCursor->GetPoint()->nContent.Assign(pCursor->GetContentNode(), 3); + + // replace with more text + pDoc->getIDocumentContentOperations().ReplaceRange(*pCursor, "blahblah", false); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + CPPUNIT_ASSERT_EQUAL(OUString("blahblah"), pCursor->GetNode().GetTextNode()->GetText()); + + rUndoManager.Undo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + CPPUNIT_ASSERT_EQUAL(OUString("foo"), pCursor->GetNode().GetTextNode()->GetText()); + + rUndoManager.Redo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + CPPUNIT_ASSERT_EQUAL(OUString("blahblah"), pCursor->GetNode().GetTextNode()->GetText()); + + rUndoManager.Undo(); + + pCursor->GetMark()->nContent.Assign(pCursor->GetContentNode(), 0); + pCursor->GetPoint()->nContent.Assign(pCursor->GetContentNode(), 3); + + // replace with less text + pDoc->getIDocumentContentOperations().ReplaceRange(*pCursor, "x", false); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + CPPUNIT_ASSERT_EQUAL(OUString("x"), pCursor->GetNode().GetTextNode()->GetText()); + + rUndoManager.Undo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + CPPUNIT_ASSERT_EQUAL(OUString("foo"), pCursor->GetNode().GetTextNode()->GetText()); + + rUndoManager.Redo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + CPPUNIT_ASSERT_EQUAL(OUString("x"), pCursor->GetNode().GetTextNode()->GetText()); + + rUndoManager.Undo(); + + pCursor->GetMark()->nContent.Assign(pCursor->GetContentNode(), 0); + pCursor->GetPoint()->nContent.Assign(pCursor->GetContentNode(), 3); + + // regex replace with paragraph breaks + pDoc->getIDocumentContentOperations().ReplaceRange(*pCursor, "xyz\\n\\nquux\\n", true); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + pWrtShell->StartOfSection(false); + CPPUNIT_ASSERT_EQUAL(OUString("xyz"), + pWrtShell->GetCursor()->GetNode().GetTextNode()->GetText()); + pWrtShell->EndOfSection(true); + CPPUNIT_ASSERT_EQUAL(OUString("xyz\n\nquux\n"), pWrtShell->GetCursor()->GetText()); + + rUndoManager.Undo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + CPPUNIT_ASSERT_EQUAL(OUString("foo"), pCursor->GetNode().GetTextNode()->GetText()); + pWrtShell->StartOfSection(false); + pWrtShell->EndOfSection(true); + CPPUNIT_ASSERT_EQUAL(OUString("foo"), pWrtShell->GetCursor()->GetText()); + + rUndoManager.Redo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + pWrtShell->StartOfSection(false); + CPPUNIT_ASSERT_EQUAL(OUString("xyz"), + pWrtShell->GetCursor()->GetNode().GetTextNode()->GetText()); + pWrtShell->EndOfSection(true); + CPPUNIT_ASSERT_EQUAL(OUString("xyz\n\nquux\n"), pWrtShell->GetCursor()->GetText()); + + // regex replace with paragraph join + pWrtShell->StartOfSection(false); + pWrtShell->Down(true); + pDoc->getIDocumentContentOperations().ReplaceRange(*pWrtShell->GetCursor(), "bar", true); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + pWrtShell->StartOfSection(false); + CPPUNIT_ASSERT_EQUAL(OUString("bar"), + pWrtShell->GetCursor()->GetNode().GetTextNode()->GetText()); + pWrtShell->EndOfSection(true); + CPPUNIT_ASSERT_EQUAL(OUString("bar\nquux\n"), pWrtShell->GetCursor()->GetText()); + + rUndoManager.Undo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + pWrtShell->StartOfSection(false); + CPPUNIT_ASSERT_EQUAL(OUString("xyz"), + pWrtShell->GetCursor()->GetNode().GetTextNode()->GetText()); + pWrtShell->EndOfSection(true); + CPPUNIT_ASSERT_EQUAL(OUString("xyz\n\nquux\n"), pWrtShell->GetCursor()->GetText()); + + rUndoManager.Redo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + pWrtShell->StartOfSection(false); + CPPUNIT_ASSERT_EQUAL(OUString("bar"), + pWrtShell->GetCursor()->GetNode().GetTextNode()->GetText()); + pWrtShell->EndOfSection(true); + CPPUNIT_ASSERT_EQUAL(OUString("bar\nquux\n"), pWrtShell->GetCursor()->GetText()); + + rUndoManager.Undo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + pWrtShell->StartOfSection(false); + CPPUNIT_ASSERT_EQUAL(OUString("xyz"), + pWrtShell->GetCursor()->GetNode().GetTextNode()->GetText()); + pWrtShell->EndOfSection(true); + CPPUNIT_ASSERT_EQUAL(OUString("xyz\n\nquux\n"), pWrtShell->GetCursor()->GetText()); + + rUndoManager.Undo(); + + CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetFlyCount(FLYCNTTYPE_FRM)); + CPPUNIT_ASSERT_EQUAL(OUString("foo"), pCursor->GetNode().GetTextNode()->GetText()); + pWrtShell->StartOfSection(false); + pWrtShell->EndOfSection(true); + CPPUNIT_ASSERT_EQUAL(OUString("foo"), pWrtShell->GetCursor()->GetText()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf54819) +{ + load(DATA_DIRECTORY, "tdf54819.fodt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(1), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(2), "ParaStyleName")); + + //turn on red-lining and hide changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE("redlines shouldn't be visible", + !IDocumentRedlineAccess::IsShowChanges( + pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // remove first paragraph with paragraph break + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 1, /*bBasicCall=*/false); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Cut(); + + // remaining paragraph keeps its original style + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(1), "ParaStyleName")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf54819_keep_numbering_with_Undo) +{ + load(DATA_DIRECTORY, "tdf54819b.odt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // heading + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + getProperty(getParagraph(2), "NumberingStyleName")); + + // next paragraph: bulleted list item + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(3), "ParaStyleName")); + OUString sNumName = getProperty(getParagraph(3), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Missing numbering style", !sNumName.isEmpty()); + CPPUNIT_ASSERT_MESSAGE("Not a bulleted list item", sNumName != "Outline"); + + //turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowDelete + | RedlineFlags::ShowInsert); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE("redlines shouldn't be visible", + !IDocumentRedlineAccess::IsShowChanges( + pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // remove heading with paragraph break + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 1, /*bBasicCall=*/false); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Cut(); + + // solved problem: changing paragraph style after deletion + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(2), "ParaStyleName")); + + sNumName = getProperty(getParagraph(2), "NumberingStyleName"); + // solved problem: lost numbering + CPPUNIT_ASSERT_MESSAGE("Missing numbering style", !sNumName.isEmpty()); + CPPUNIT_ASSERT_MESSAGE("Not a bulleted list item", sNumName != "Outline"); + + // accept deletion, remaining (now second) paragraph: still bulleted list item + IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); + rIDRA.AcceptAllRedline(true); + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(2), "ParaStyleName")); + sNumName = getProperty(getParagraph(2), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Missing numbering style", !sNumName.isEmpty()); + CPPUNIT_ASSERT_MESSAGE("Not a bulleted list item", sNumName != "Outline"); + + // solved problem: Undo with the workaround + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + rUndoManager.Undo(); + rUndoManager.Undo(); + + // heading, manual test is correct + // TODO: it works well, but the test fails... + // SwWrtShell* const pWrtShell2 = pTextDoc->GetDocShell()->GetWrtShell(); + // CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + // getProperty(getParagraph(2), "ParaStyleName")); + // CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + // getProperty(getParagraph(2), "NumberingStyleName")); + + // next paragraph: bulleted list item + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(3), "ParaStyleName")); + sNumName = getProperty(getParagraph(3), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Missing numbering style", !sNumName.isEmpty()); + CPPUNIT_ASSERT_MESSAGE("Not a bulleted list item", sNumName != "Outline"); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf119571_keep_numbering_with_Undo) +{ + // as the previous test, but with partial paragraph deletion: + // all deleted paragraphs get the formatting of the first (the partially deleted) one + load(DATA_DIRECTORY, "tdf54819b.odt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // heading + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + getProperty(getParagraph(2), "NumberingStyleName")); + + // next paragraph: bulleted list item + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(3), "ParaStyleName")); + OUString sNumName = getProperty(getParagraph(3), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Missing numbering style", !sNumName.isEmpty()); + CPPUNIT_ASSERT_MESSAGE("Not a bulleted list item", sNumName != "Outline"); + + // third paragraph: normal text without numbering + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(4), "ParaStyleName")); + sNumName = getProperty(getParagraph(4), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Bad numbering", sNumName.isEmpty()); + + //turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowDelete + | RedlineFlags::ShowInsert); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE("redlines shouldn't be visible", + !IDocumentRedlineAccess::IsShowChanges( + pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // remove only end part of the heading and the next numbered paragraph with paragraph break + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/false, 6, /*bBasicCall=*/false); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 2, /*bBasicCall=*/false); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 1, /*bBasicCall=*/false); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Cut(); + + // solved problem: changing paragraph style after deletion + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + + // solved problem: apply numbering + CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + getProperty(getParagraph(2), "NumberingStyleName")); + + // accept deletion + IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); + rIDRA.AcceptAllRedline(true); + + // Joined paragraph 2 and paragraph 4: Fusce...nunc. + CPPUNIT_ASSERT(getParagraph(2)->getString().startsWith("Fusce")); + CPPUNIT_ASSERT(getParagraph(2)->getString().endsWith("nunc.")); + // Remaining (now second) paragraph: it is still heading + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + getProperty(getParagraph(2), "NumberingStyleName")); + + // solved problem: Undo with the workaround + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + rUndoManager.Undo(); + rUndoManager.Undo(); + + // heading + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + getProperty(getParagraph(2), "NumberingStyleName")); + + // next paragraph: bulleted list item + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(3), "ParaStyleName")); + sNumName = getProperty(getParagraph(3), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Missing numbering style", !sNumName.isEmpty()); + CPPUNIT_ASSERT_MESSAGE("Not a bulleted list item", sNumName != "Outline"); + + // third paragraph: normal text without numbering + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(4), "ParaStyleName")); + sNumName = getProperty(getParagraph(4), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Bad numbering", sNumName.isEmpty()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf119571_keep_numbering_with_Reject) +{ + // as the previous test, but with partial paragraph deletion: + // all deleted paragraphs get the formatting of the first (the partially deleted) one + load(DATA_DIRECTORY, "tdf54819b.odt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // heading + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + getProperty(getParagraph(2), "NumberingStyleName")); + + // next paragraph: bulleted list item + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(3), "ParaStyleName")); + OUString sNumName = getProperty(getParagraph(3), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Missing numbering style", !sNumName.isEmpty()); + CPPUNIT_ASSERT_MESSAGE("Not a bulleted list item", sNumName != "Outline"); + + // third paragraph: normal text without numbering + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(4), "ParaStyleName")); + sNumName = getProperty(getParagraph(4), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Bad numbering", sNumName.isEmpty()); + + //turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowDelete + | RedlineFlags::ShowInsert); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE("redlines shouldn't be visible", + !IDocumentRedlineAccess::IsShowChanges( + pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // remove only end part of the heading and the next numbered paragraph with paragraph break + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/false, 6, /*bBasicCall=*/false); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 2, /*bBasicCall=*/false); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 1, /*bBasicCall=*/false); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Cut(); + + // solved problem: changing paragraph style after deletion + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + + // solved problem: apply numbering + CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + getProperty(getParagraph(2), "NumberingStyleName")); + + // reject deletion + IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); + rIDRA.AcceptAllRedline(false); + + // heading + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Outline"), + getProperty(getParagraph(2), "NumberingStyleName")); + + // next paragraph: bulleted list item + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(3), "ParaStyleName")); + sNumName = getProperty(getParagraph(3), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Missing numbering style", !sNumName.isEmpty()); + CPPUNIT_ASSERT_MESSAGE("Not a bulleted list item", sNumName != "Outline"); + + // third paragraph: normal text without numbering + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(4), "ParaStyleName")); + sNumName = getProperty(getParagraph(4), "NumberingStyleName"); + CPPUNIT_ASSERT_MESSAGE("Bad numbering", sNumName.isEmpty()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf109376_redline) +{ + SwDoc* pDoc = createDoc(); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + CPPUNIT_ASSERT(pWrtShell); + // need 2 paragraphs to get to the bMoveNds case + pWrtShell->Insert("foo"); + pWrtShell->SplitNode(); + pWrtShell->Insert("bar"); + pWrtShell->SplitNode(); + pWrtShell->StartOfSection(false); + + // add AT_PARA fly at 1st to be deleted node + SwFormatAnchor anchor(RndStdIds::FLY_AT_PARA); + anchor.SetAnchor(pWrtShell->GetCursor()->GetPoint()); + SfxItemSet flySet(pDoc->GetAttrPool(), + svl::Items{}); + flySet.Put(anchor); + SwFormatFrameSize size(SwFrameSize::Minimum, 1000, 1000); + flySet.Put(size); // set a size, else we get 1 char per line... + SwFrameFormat const* pFly = pWrtShell->NewFlyFrame(flySet, /*bAnchValid=*/true); + CPPUNIT_ASSERT(pFly != nullptr); + + pWrtShell->SttEndDoc(false); + SwInsertTableOptions tableOpt(SwInsertTableFlags::DefaultBorder, 0); + const SwTable& rTable = pWrtShell->InsertTable(tableOpt, 1, 1); + + pWrtShell->StartOfSection(false); + SwPaM pam(*pWrtShell->GetCursor()->GetPoint()); + pam.SetMark(); + pam.GetPoint()->nNode = *rTable.GetTableNode(); + pam.GetPoint()->nContent.Assign(nullptr, 0); + pam.Exchange(); // same selection direction as in doc compare... + + IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); + rIDRA.SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowInsert | RedlineFlags::ShowDelete); + rIDRA.AppendRedline(new SwRangeRedline(RedlineType::Delete, pam), true); + // this used to assert/crash with m_pAnchoredFlys mismatch because the + // fly was not deleted but its anchor was moved to the SwTableNode + rIDRA.AcceptAllRedline(true); + + CPPUNIT_ASSERT_EQUAL(size_t(0), pWrtShell->GetFlyCount(FLYCNTTYPE_FRM)); + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + rUndoManager.Undo(); + CPPUNIT_ASSERT_EQUAL(size_t(1), pWrtShell->GetFlyCount(FLYCNTTYPE_FRM)); + rUndoManager.Redo(); + CPPUNIT_ASSERT_EQUAL(size_t(0), pWrtShell->GetFlyCount(FLYCNTTYPE_FRM)); + rUndoManager.Undo(); + CPPUNIT_ASSERT_EQUAL(size_t(1), pWrtShell->GetFlyCount(FLYCNTTYPE_FRM)); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf109376) +{ + SwDoc* pDoc = createDoc(); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + CPPUNIT_ASSERT(pWrtShell); + // need 2 paragraphs to get to the bMoveNds case + pWrtShell->Insert("foo"); + pWrtShell->SplitNode(); + pWrtShell->Insert("bar"); + pWrtShell->SplitNode(); + pWrtShell->StartOfSection(false); + + // add AT_PARA fly at 1st to be deleted node + SwFormatAnchor anchor(RndStdIds::FLY_AT_PARA); + anchor.SetAnchor(pWrtShell->GetCursor()->GetPoint()); + SfxItemSet flySet(pDoc->GetAttrPool(), + svl::Items{}); + flySet.Put(anchor); + SwFormatFrameSize size(SwFrameSize::Minimum, 1000, 1000); + flySet.Put(size); // set a size, else we get 1 char per line... + SwFrameFormat const* pFly = pWrtShell->NewFlyFrame(flySet, /*bAnchValid=*/true); + CPPUNIT_ASSERT(pFly != nullptr); + + pWrtShell->SttEndDoc(false); + SwInsertTableOptions tableOpt(SwInsertTableFlags::DefaultBorder, 0); + const SwTable& rTable = pWrtShell->InsertTable(tableOpt, 1, 1); + + pWrtShell->StartOfSection(false); + SwPaM pam(*pWrtShell->GetCursor()->GetPoint()); + pam.SetMark(); + pam.GetPoint()->nNode = *rTable.GetTableNode(); + pam.GetPoint()->nContent.Assign(nullptr, 0); + pam.Exchange(); // same selection direction as in doc compare... + + // this used to assert/crash with m_pAnchoredFlys mismatch because the + // fly was not deleted but its anchor was moved to the SwTableNode + pDoc->getIDocumentContentOperations().DeleteRange(pam); + CPPUNIT_ASSERT_EQUAL(size_t(0), pWrtShell->GetFlyCount(FLYCNTTYPE_FRM)); + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + rUndoManager.Undo(); + CPPUNIT_ASSERT_EQUAL(size_t(1), pWrtShell->GetFlyCount(FLYCNTTYPE_FRM)); + rUndoManager.Redo(); + CPPUNIT_ASSERT_EQUAL(size_t(0), pWrtShell->GetFlyCount(FLYCNTTYPE_FRM)); + rUndoManager.Undo(); + CPPUNIT_ASSERT_EQUAL(size_t(1), pWrtShell->GetFlyCount(FLYCNTTYPE_FRM)); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf64242_optimizeTable) +{ + SwDoc* pDoc = createDoc("tdf64242_optimizeTable.odt"); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + + uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference xTables(xTablesSupplier->getTextTables(), + uno::UNO_QUERY); + uno::Reference xTextTable(xTables->getByIndex(0), uno::UNO_QUERY); + uno::Reference xTableRows = xTextTable->getRows(); + + double origWidth = getProperty(xTextTable, "Width"); + sal_Int32 nToleranceW = origWidth * .01; + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("Table Width", double(17013), origWidth, nToleranceW); + + pWrtShell->SelTable(); //select the whole table + + dispatchCommand(mxComponent, ".uno:SetOptimalColumnWidth", {}); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("Table Width: optimize", origWidth, + getProperty(xTextTable, "Width"), nToleranceW); + + dispatchCommand(mxComponent, ".uno:SetMinimalColumnWidth", {}); + CPPUNIT_ASSERT_MESSAGE("Table Width: minimized", + (origWidth - nToleranceW) > getProperty(xTextTable, "Width")); + + double origRowHeight = getProperty(xTableRows->getByIndex(2), "Height"); + sal_Int32 nToleranceH = origRowHeight * .01; + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("Row Height", double(3441), origRowHeight, nToleranceH); + + dispatchCommand(mxComponent, ".uno:SetOptimalRowHeight", {}); + double optimalRowHeight = getProperty(xTableRows->getByIndex(2), "Height"); + CPPUNIT_ASSERT_MESSAGE("Row Height: optimized", + (origRowHeight - nToleranceH) > optimalRowHeight); + + dispatchCommand(mxComponent, ".uno:SetMinimalRowHeight", {}); + double minimalRowHeight = getProperty(xTableRows->getByIndex(2), "Height"); + CPPUNIT_ASSERT_MESSAGE("Row Height: minimized", + (optimalRowHeight - nToleranceH) > minimalRowHeight); + CPPUNIT_ASSERT_EQUAL_MESSAGE("Row set to auto-height", double(0), minimalRowHeight); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf126784_distributeSelectedColumns) +{ + SwDoc* pDoc = createDoc("tdf126784_distributeSelectedColumns.odt"); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + + uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference xTables(xTablesSupplier->getTextTables(), + uno::UNO_QUERY); + uno::Reference xTextTable(xTables->getByIndex(0), uno::UNO_QUERY); + uno::Reference xTableRows = xTextTable->getRows(); + + auto aSeq = getProperty>(xTableRows->getByIndex(0), + "TableColumnSeparators"); + sal_Int16 nOrigCol2Pos = aSeq[0].Position; + sal_Int16 nOrigCol3Pos = aSeq[1].Position; + + //Select column 1 and 2 + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 1, /*bBasicCall=*/false); + + dispatchCommand(mxComponent, ".uno:DistributeColumns", {}); + + aSeq = getProperty>(xTableRows->getByIndex(0), + "TableColumnSeparators"); + CPPUNIT_ASSERT_MESSAGE("Second column should shrink", nOrigCol2Pos < aSeq[0].Position); + CPPUNIT_ASSERT_EQUAL_MESSAGE("Last column shouldn't change", nOrigCol3Pos, aSeq[1].Position); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf108687_tabstop) +{ + SwDoc* pDoc = createDoc("tdf108687_tabstop.odt"); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + sal_Int32 nStartIndex = pWrtShell->GetCursor()->GetNode().GetIndex(); + CPPUNIT_ASSERT_EQUAL(sal_Int32(9), nStartIndex); + + // Now pressing 'tab' should jump to the radio buttons. + SwXTextDocument* pXTextDocument = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pXTextDocument); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYINPUT, 0, KEY_TAB); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYUP, 0, KEY_TAB); + Scheduler::ProcessEventsToIdle(); + //sal_Int32 nEndIndex = pWrtShell->GetCursor()->GetNode().GetIndex(); + //CPPUNIT_ASSERT_EQUAL(sal_Int32(11), nEndIndex); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf119571) +{ + load(DATA_DIRECTORY, "tdf54819.fodt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(1), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(2), "ParaStyleName")); + + //turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowDelete + | RedlineFlags::ShowInsert); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE( + "redlines should be visible", + IDocumentRedlineAccess::IsShowChanges(pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // join paragraphs by removing the end of the first one with paragraph break + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/false, 1, /*bBasicCall=*/false); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 1, /*bBasicCall=*/false); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Cut(); + + // second paragraph changes its style in "Show changes" mode + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(1), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf119019) +{ + // check handling of overlapping redlines + load(DATA_DIRECTORY, "tdf119019.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Nunc viverra imperdiet enim. Fusce est. Vivamus a tellus."), + getParagraph(2)->getString()); + CPPUNIT_ASSERT_EQUAL(OUString(""), getRun(getParagraph(2), 1)->getString()); + // second paragraph has got a tracked paragraph formatting at this point + CPPUNIT_ASSERT(hasProperty(getRun(getParagraph(2), 1), "RedlineType")); + + // delete last word of the second paragraph to remove tracked paragraph formatting + // of this paragraph to track and show word deletion correctly. + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->EndPara(/*bSelect=*/false); + pWrtShell->Left(CRSR_SKIP_CHARS, /*bSelect=*/true, 7, /*bBasicCall=*/false); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Cut(); + + // check tracked text deletion + CPPUNIT_ASSERT_EQUAL(OUString("tellus."), getRun(getParagraph(2), 3)->getString()); + CPPUNIT_ASSERT_EQUAL(OUString(""), getRun(getParagraph(2), 2)->getString()); + CPPUNIT_ASSERT(hasProperty(getRun(getParagraph(2), 2), "RedlineType")); + + // make sure that the tracked paragraph formatting is removed + CPPUNIT_ASSERT(!hasProperty(getRun(getParagraph(2), 1), "RedlineType")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf119824) +{ + // check handling of overlapping redlines with Redo + SwDoc* pDoc = createDoc("tdf119019.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Pellentesque habitant morbi tristique senectus " + "et netus et malesuada fames ac turpis egestas. " + "Proin pharetra nonummy pede. Mauris et orci."), + getParagraph(3)->getString()); + CPPUNIT_ASSERT_EQUAL(OUString(""), getRun(getParagraph(3), 1)->getString()); + // third paragraph has got a tracked paragraph formatting at this point + CPPUNIT_ASSERT(hasProperty(getRun(getParagraph(3), 1), "RedlineType")); + + // and a tracked text deletion at the beginning of the paragraph + CPPUNIT_ASSERT_EQUAL(OUString("Pellentesque habitant morbi tristique senectus "), + getRun(getParagraph(3), 3)->getString()); + CPPUNIT_ASSERT_EQUAL(OUString(""), getRun(getParagraph(3), 2)->getString()); + CPPUNIT_ASSERT(hasProperty(getRun(getParagraph(3), 2), "RedlineType")); + + // delete last word of the third paragraph to remove tracked paragraph formatting + // of this paragraph to track and show word deletion correctly. + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->EndPara(/*bSelect=*/false); + pWrtShell->Left(CRSR_SKIP_CHARS, /*bSelect=*/true, 5, /*bBasicCall=*/false); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Cut(); + + // check tracking of the new text deletion + CPPUNIT_ASSERT_EQUAL(OUString("orci."), getRun(getParagraph(3), 7)->getString()); + CPPUNIT_ASSERT_EQUAL(OUString(""), getRun(getParagraph(3), 6)->getString()); + CPPUNIT_ASSERT(hasProperty(getRun(getParagraph(3), 6), "RedlineType")); + + // make sure that the tracked paragraph formatting is removed (tracked deletion is in the second run) + CPPUNIT_ASSERT_EQUAL(OUString("Pellentesque habitant morbi tristique senectus "), + getRun(getParagraph(3), 2)->getString()); + CPPUNIT_ASSERT_EQUAL(OUString(""), getRun(getParagraph(3), 1)->getString()); + CPPUNIT_ASSERT(hasProperty(getRun(getParagraph(3), 1), "RedlineType")); + + // tdf#119824 check redo + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + rUndoManager.Undo(); + rUndoManager.Undo(); + rUndoManager.Redo(); + rUndoManager.Redo(); + + // check again the first tracked text deletion (we lost this before the redo fix) + CPPUNIT_ASSERT_EQUAL(OUString("Pellentesque habitant morbi tristique senectus "), + getRun(getParagraph(3), 2)->getString()); + CPPUNIT_ASSERT_EQUAL(OUString(""), getRun(getParagraph(3), 1)->getString()); + CPPUNIT_ASSERT(hasProperty(getRun(getParagraph(3), 1), "RedlineType")); + + // check redo of the new tracked text deletion + CPPUNIT_ASSERT_EQUAL(OUString("orci."), getRun(getParagraph(3), 7)->getString()); + CPPUNIT_ASSERT_EQUAL(OUString(""), getRun(getParagraph(3), 6)->getString()); + CPPUNIT_ASSERT(hasProperty(getRun(getParagraph(3), 6), "RedlineType")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf105413) +{ + load(DATA_DIRECTORY, "tdf105413.fodt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // all paragraphs have got Standard paragraph style + for (int i = 1; i < 4; ++i) + { + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(i), "ParaStyleName")); + } + + // turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowInsert + | RedlineFlags::ShowDelete); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE( + "redlines should be visible", + IDocumentRedlineAccess::IsShowChanges(pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // Set Heading 1 paragraph style in the 3th paragraph. + // Because of the tracked deleted region between them, + // this sets also the same style in the first paragraph automatically + // to keep the changed paragraph style at hiding tracked changes or saving the document + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->EndPara(/*bSelect=*/false); + + uno::Sequence aPropertyValues = comphelper::InitPropertySequence({ + { "Style", uno::makeAny(OUString("Heading 1")) }, + { "FamilyName", uno::makeAny(OUString("ParagraphStyles")) }, + }); + dispatchCommand(mxComponent, ".uno:StyleApply", aPropertyValues); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(3), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(2), "ParaStyleName")); + // first paragraph gets the same heading style + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(1), "ParaStyleName")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf76817) +{ + load(DATA_DIRECTORY, "num-parent-style.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(2), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("1.1"), + getProperty(getParagraph(2), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(4), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(4), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("2.1"), + getProperty(getParagraph(4), "ListLabelString")); + + // set Heading 2 style of paragraph 2 to Heading 1 + + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + + uno::Sequence aPropertyValues = comphelper::InitPropertySequence({ + { "Style", uno::makeAny(OUString("Heading 1")) }, + { "FamilyName", uno::makeAny(OUString("ParagraphStyles")) }, + }); + dispatchCommand(mxComponent, ".uno:StyleApply", aPropertyValues); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(1), + getProperty(getParagraph(2), "OutlineLevel")); + // This was "1 Heading" instead of "2 Heading" + CPPUNIT_ASSERT_EQUAL(OUString("2"), getProperty(getParagraph(2), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(4), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(4), "OutlineLevel")); + // This was "2.1 Heading" + CPPUNIT_ASSERT_EQUAL(OUString("3.1"), + getProperty(getParagraph(4), "ListLabelString")); + + // set Heading 1 style of paragraph 3 to Heading 2 + + pWrtShell->Down(/*bSelect=*/false); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(3), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(1), + getProperty(getParagraph(3), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("3"), getProperty(getParagraph(3), "ListLabelString")); + + uno::Sequence aPropertyValues2 = comphelper::InitPropertySequence({ + { "Style", uno::makeAny(OUString("Heading 2")) }, + { "FamilyName", uno::makeAny(OUString("ParagraphStyles")) }, + }); + dispatchCommand(mxComponent, ".uno:StyleApply", aPropertyValues2); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(3), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(3), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("2.1"), + getProperty(getParagraph(3), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(4), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(4), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("2.2"), + getProperty(getParagraph(4), "ListLabelString")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf76817_round_trip) +{ + load(DATA_DIRECTORY, "tdf76817.fodt"); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // save it to DOCX + reload("Office Open XML Text", "tdf76817.docx"); + pTextDoc = dynamic_cast(mxComponent.get()); + + SwViewShell* pViewShell + = pTextDoc->GetDocShell()->GetDoc()->getIDocumentLayoutAccess().GetCurrentViewShell(); + pViewShell->Reformat(); + + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(2), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("1.1"), + getProperty(getParagraph(2), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(4), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(4), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("2.1"), + getProperty(getParagraph(4), "ListLabelString")); + + // set Heading 2 style of paragraph 2 to Heading 1 + + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + + uno::Sequence aPropertyValues = comphelper::InitPropertySequence({ + { "Style", uno::makeAny(OUString("Heading 1")) }, + { "FamilyName", uno::makeAny(OUString("ParagraphStyles")) }, + }); + dispatchCommand(mxComponent, ".uno:StyleApply", aPropertyValues); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(1), + getProperty(getParagraph(2), "OutlineLevel")); + // This was "1 Heading" instead of "2 Heading" + CPPUNIT_ASSERT_EQUAL(OUString("2"), getProperty(getParagraph(2), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(4), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(4), "OutlineLevel")); + // This was "2.1 Heading" + CPPUNIT_ASSERT_EQUAL(OUString("3.1"), + getProperty(getParagraph(4), "ListLabelString")); + + // set Heading 1 style of paragraph 3 to Heading 2 + + pWrtShell->Down(/*bSelect=*/false); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(3), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(1), + getProperty(getParagraph(3), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("3"), getProperty(getParagraph(3), "ListLabelString")); + + uno::Sequence aPropertyValues2 = comphelper::InitPropertySequence({ + { "Style", uno::makeAny(OUString("Heading 2")) }, + { "FamilyName", uno::makeAny(OUString("ParagraphStyles")) }, + }); + dispatchCommand(mxComponent, ".uno:StyleApply", aPropertyValues2); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(3), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(3), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("2.1"), + getProperty(getParagraph(3), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(4), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(4), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("2.2"), + getProperty(getParagraph(4), "ListLabelString")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf76817_custom_outline) +{ + load(DATA_DIRECTORY, "tdf76817.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(1), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(1), + getProperty(getParagraph(1), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("1"), getProperty(getParagraph(1), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(2), "OutlineLevel")); + // This wasn't numbered + CPPUNIT_ASSERT_EQUAL(OUString("1.1"), + getProperty(getParagraph(2), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(4), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(4), "OutlineLevel")); + // This wasn't numbered + CPPUNIT_ASSERT_EQUAL(OUString("2.1"), + getProperty(getParagraph(4), "ListLabelString")); + + // set Heading 2 style of paragraph 2 to Heading 1 + + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + + uno::Sequence aPropertyValues = comphelper::InitPropertySequence({ + { "Style", uno::makeAny(OUString("Heading 1")) }, + { "FamilyName", uno::makeAny(OUString("ParagraphStyles")) }, + }); + dispatchCommand(mxComponent, ".uno:StyleApply", aPropertyValues); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(1), + getProperty(getParagraph(2), "OutlineLevel")); + CPPUNIT_ASSERT_EQUAL(OUString("2"), getProperty(getParagraph(2), "ListLabelString")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(4), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(static_cast(2), + getProperty(getParagraph(4), "OutlineLevel")); + // This wasn't numbered + CPPUNIT_ASSERT_EQUAL(OUString("3.1"), + getProperty(getParagraph(4), "ListLabelString")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf123102) +{ + createDoc("tdf123102.odt"); + // insert a new row after a vertically merged cell + dispatchCommand(mxComponent, ".uno:InsertRowsAfter", {}); + xmlDocUniquePtr pXmlDoc = parseLayoutDump(); + // This was "3." - caused by the hidden numbered paragraph of the new merged cell + assertXPath(pXmlDoc, "/root/page/body/tab/row[6]/cell[1]/txt/Special", "rText", "2."); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testUnfloatButtonSmallTable) +{ + // The floating table in the test document is too small, so we don't provide an unfloat button + load(FLOATING_TABLE_DATA_DIRECTORY, "small_floating_table.odt"); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + CPPUNIT_ASSERT(pWrtShell); + + const SwSortedObjs* pAnchored + = pWrtShell->GetLayout()->GetLower()->GetLower()->GetLower()->GetDrawObjs(); + CPPUNIT_ASSERT(pAnchored); + CPPUNIT_ASSERT_EQUAL(static_cast(1), pAnchored->size()); + SwAnchoredObject* pAnchoredObj = (*pAnchored)[0]; + + SwFlyFrame* pFlyFrame = dynamic_cast(pAnchoredObj); + CPPUNIT_ASSERT(pFlyFrame); + CPPUNIT_ASSERT(!pFlyFrame->IsShowUnfloatButton(pWrtShell)); + + SdrObject* pObj = pFlyFrame->GetFormat()->FindRealSdrObject(); + CPPUNIT_ASSERT(pObj); + pWrtShell->SelectObj(Point(), 0, pObj); + CPPUNIT_ASSERT(!pFlyFrame->IsShowUnfloatButton(pWrtShell)); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testUnfloatButton) +{ + // Different use cases where unfloat button should be visible + const std::vector aTestFiles = { + "unfloatable_floating_table.odt", // Typical use case of multipage floating table + "unfloatable_floating_table.docx", // Need to test the DOCX import whether we detect the floating table correctly + "unfloatable_floating_table.doc", // Also the DOC import + "unfloatable_small_floating_table.docx" // Atypical use case, when the table is small, but because of it's position is it broken to two pages + }; + + for (const OUString& aTestFile : aTestFiles) + { + OString sTestFileName = OUStringToOString(aTestFile, RTL_TEXTENCODING_UTF8); + OString sFailureMessage = OStringLiteral("Failure in the test file: ") + sTestFileName; + + load(FLOATING_TABLE_DATA_DIRECTORY, sTestFileName.getStr()); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pTextDoc); + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pWrtShell); + + const SwSortedObjs* pAnchored; + if (sTestFileName == "unfloatable_small_floating_table.docx") + pAnchored = pWrtShell->GetLayout() + ->GetLower() + ->GetLower() + ->GetLower() + ->GetNext() + ->GetDrawObjs(); + else + pAnchored = pWrtShell->GetLayout()->GetLower()->GetLower()->GetLower()->GetDrawObjs(); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pAnchored); + CPPUNIT_ASSERT_EQUAL_MESSAGE(sFailureMessage.getStr(), static_cast(1), + pAnchored->size()); + SwAnchoredObject* pAnchoredObj = (*pAnchored)[0]; + + // The unfloat button is not visible until it gets selected + SwFlyFrame* pFlyFrame = dynamic_cast(pAnchoredObj); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pFlyFrame); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), + !pFlyFrame->IsShowUnfloatButton(pWrtShell)); + + SdrObject* pObj = pFlyFrame->GetFormat()->FindRealSdrObject(); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pObj); + pWrtShell->SelectObj(Point(), 0, pObj); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pFlyFrame->IsShowUnfloatButton(pWrtShell)); + } +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testUnfloatButtonReadOnlyMode) +{ + // In read only mode we don't show the unfloat button even if we have a multipage floating table + load(FLOATING_TABLE_DATA_DIRECTORY, "unfloatable_floating_table.odt"); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + CPPUNIT_ASSERT(pWrtShell); + pWrtShell->SetReadonlyOption(true); + + const SwSortedObjs* pAnchored + = pWrtShell->GetLayout()->GetLower()->GetLower()->GetLower()->GetDrawObjs(); + CPPUNIT_ASSERT(pAnchored); + CPPUNIT_ASSERT_EQUAL(static_cast(1), pAnchored->size()); + SwAnchoredObject* pAnchoredObj = (*pAnchored)[0]; + + SwFlyFrame* pFlyFrame = dynamic_cast(pAnchoredObj); + CPPUNIT_ASSERT(pFlyFrame); + CPPUNIT_ASSERT(!pFlyFrame->IsShowUnfloatButton(pWrtShell)); + + SdrObject* pObj = pFlyFrame->GetFormat()->FindRealSdrObject(); + CPPUNIT_ASSERT(pObj); + pWrtShell->SelectObj(Point(), 0, pObj); + CPPUNIT_ASSERT(!pFlyFrame->IsShowUnfloatButton(pWrtShell)); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testUnfloating) +{ + // Test unfloating with tables imported from different file formats + const std::vector aTestFiles = { + "unfloatable_floating_table.odt", + "unfloatable_floating_table.docx", + "unfloatable_floating_table.doc", + }; + + for (const OUString& aTestFile : aTestFiles) + { + OString sTestFileName = OUStringToOString(aTestFile, RTL_TEXTENCODING_UTF8); + OString sFailureMessage = OStringLiteral("Failure in the test file: ") + sTestFileName; + + // Test what happens when pushing the unfloat button + load(FLOATING_TABLE_DATA_DIRECTORY, "unfloatable_floating_table.docx"); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pTextDoc); + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pWrtShell); + + SwFlyFrame* pFlyFrame; + + // Before unfloating we have only one page with a fly frame + { + CPPUNIT_ASSERT_EQUAL_MESSAGE(sFailureMessage.getStr(), SwFrameType::Page, + pWrtShell->GetLayout()->GetLower()->GetType()); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), + !pWrtShell->GetLayout()->GetLower()->GetNext()); + CPPUNIT_ASSERT_EQUAL_MESSAGE( + sFailureMessage.getStr(), SwFrameType::Txt, + pWrtShell->GetLayout()->GetLower()->GetLower()->GetLower()->GetType()); + const SwSortedObjs* pAnchored + = pWrtShell->GetLayout()->GetLower()->GetLower()->GetLower()->GetDrawObjs(); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pAnchored); + CPPUNIT_ASSERT_EQUAL_MESSAGE(sFailureMessage.getStr(), static_cast(1), + pAnchored->size()); + SwAnchoredObject* pAnchoredObj = (*pAnchored)[0]; + pFlyFrame = dynamic_cast(pAnchoredObj); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pFlyFrame); + } + + // Select the floating table + SdrObject* pObj = pFlyFrame->GetFormat()->FindRealSdrObject(); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pObj); + pWrtShell->SelectObj(Point(), 0, pObj); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), pFlyFrame->IsShowUnfloatButton(pWrtShell)); + + // Push the unfloat button + pFlyFrame->ActiveUnfloatButton(pWrtShell); + Scheduler::ProcessEventsToIdle(); + + // After unfloating we have two pages with one table frame on each page + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), + pWrtShell->GetLayout()->GetLower()->GetNext()); + CPPUNIT_ASSERT_EQUAL_MESSAGE(sFailureMessage.getStr(), SwFrameType::Page, + pWrtShell->GetLayout()->GetLower()->GetNext()->GetType()); + CPPUNIT_ASSERT_MESSAGE(sFailureMessage.getStr(), + !pWrtShell->GetLayout()->GetLower()->GetNext()->GetNext()); + CPPUNIT_ASSERT_EQUAL_MESSAGE( + sFailureMessage.getStr(), SwFrameType::Tab, + pWrtShell->GetLayout()->GetLower()->GetLower()->GetLower()->GetType()); + CPPUNIT_ASSERT_EQUAL_MESSAGE( + sFailureMessage.getStr(), SwFrameType::Tab, + pWrtShell->GetLayout()->GetLower()->GetNext()->GetLower()->GetLower()->GetType()); + } +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testRTLparaStyle_LocaleArabic) +{ + // New documents, created in RTL locales, were not round-tripping the paragraph style as RTL. + // Set the locale to "ar" for this test - see preTest() at the top of this file. + std::unique_ptr const pChanges(preTest("LocaleArabic")); + + createDoc(); // new, empty doc - everything defaults to RTL with Arabic locale + + // Save it and load it back. + reload("Office Open XML Text", "tdf116404_paraStyleFrameDir.docx"); + + uno::Reference xPageStyle( + getStyles("ParagraphStyles")->getByName("Default Paragraph Style"), uno::UNO_QUERY_THROW); + // Test the text Direction value for the -none- based paragraph styles + CPPUNIT_ASSERT_EQUAL_MESSAGE("RTL Writing Mode", sal_Int32(1), + getProperty(xPageStyle, "WritingMode")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf122893) +{ + load(DATA_DIRECTORY, "tdf105413.fodt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // all paragraphs are left-aligned with preset single line spacing + for (int i = 1; i < 4; ++i) + { + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(getParagraph(i), "ParaAdjust")); + dispatchCommand(mxComponent, ".uno:SpacePara1", {}); + } + + // turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowInsert + | RedlineFlags::ShowDelete); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE( + "redlines should be visible", + IDocumentRedlineAccess::IsShowChanges(pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // Set center-aligned paragraph with preset double line spacing in the 3th paragraph. + // Because of the tracked deleted region between them, + // this sets also the same formatting in the first paragraph automatically + // to keep the changed paragraph formatting at hiding tracked changes or saving the document + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->EndPara(/*bSelect=*/false); + + dispatchCommand(mxComponent, ".uno:CenterPara", {}); + dispatchCommand(mxComponent, ".uno:SpacePara2", {}); + + CPPUNIT_ASSERT_EQUAL(sal_Int32(3), + getProperty(getParagraph(3), "ParaAdjust")); // center-aligned + CPPUNIT_ASSERT_EQUAL(sal_Int16(200), + getProperty(getParagraph(3), "ParaLineSpacing") + .Height); // double line spacing + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), + getProperty(getParagraph(2), "ParaAdjust")); // left-aligned + CPPUNIT_ASSERT_EQUAL(sal_Int16(100), + getProperty(getParagraph(2), "ParaLineSpacing") + .Height); // single line spacing + // first paragraph is also center-aligned with double line spacing + CPPUNIT_ASSERT_EQUAL(sal_Int32(3), getProperty(getParagraph(1), "ParaAdjust")); + CPPUNIT_ASSERT_EQUAL( + sal_Int16(200), getProperty(getParagraph(1), "ParaLineSpacing").Height); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf122901) +{ + load(DATA_DIRECTORY, "tdf105413.fodt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // all paragraphs with zero borders + for (int i = 1; i < 4; ++i) + { + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), + getProperty(getParagraph(i), "ParaTopMargin")); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), + getProperty(getParagraph(i), "ParaBottomMargin")); + } + + // turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowInsert + | RedlineFlags::ShowDelete); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE( + "redlines should be visible", + IDocumentRedlineAccess::IsShowChanges(pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // Increase paragraph borders in the 3th paragraph, similar to the default icon of the UI + // "Increase Paragraph Spacing". Because of the tracked deleted region between them, + // this sets also the same formatting in the first paragraph automatically + // to keep the changed paragraph formatting at hiding tracked changes or saving the document + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->EndPara(/*bSelect=*/false); + + dispatchCommand(mxComponent, ".uno:ParaspaceIncrease", {}); + + CPPUNIT_ASSERT_EQUAL(sal_Int32(101), getProperty(getParagraph(3), "ParaTopMargin")); + CPPUNIT_ASSERT_EQUAL(sal_Int32(101), + getProperty(getParagraph(3), "ParaBottomMargin")); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(getParagraph(2), "ParaTopMargin")); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(getParagraph(2), "ParaBottomMargin")); + + // first paragraph is also center-aligned with double line spacing + CPPUNIT_ASSERT_EQUAL(sal_Int32(101), getProperty(getParagraph(1), "ParaTopMargin")); + CPPUNIT_ASSERT_EQUAL(sal_Int32(101), + getProperty(getParagraph(1), "ParaBottomMargin")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf122942) +{ + load(DATA_DIRECTORY, "tdf122942.odt"); + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + + // Do the moral equivalent of mouse button down, move and up. + // Start creating a custom shape that overlaps with the rounded rectangle + // already present in the document. + Point aStartPos(8000, 3000); + pWrtShell->BeginCreate(static_cast(OBJ_CUSTOMSHAPE), aStartPos); + + // Set its size. + Point aMovePos(10000, 5000); + pWrtShell->MoveCreate(aMovePos); + + // Finish creation. + pWrtShell->EndCreate(SdrCreateCmd::ForceEnd); + + // Make sure that the shape is inserted. + SwDoc* pDoc = pWrtShell->GetDoc(); + const SwFrameFormats& rFormats = *pDoc->GetSpzFrameFormats(); + CPPUNIT_ASSERT_EQUAL(static_cast(2), rFormats.size()); + + reload("writer8", "tdf122942.odt"); + pTextDoc = dynamic_cast(mxComponent.get()); + pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pDoc = pWrtShell->GetDoc(); + const SwFrameFormats& rFormats2 = *pDoc->GetSpzFrameFormats(); + CPPUNIT_ASSERT_EQUAL(static_cast(2), rFormats2.size()); + + // Make sure the top of the inserted shape does not move outside the existing shape, even after + // reload. + SdrObject* pObject1 = rFormats2[0]->FindSdrObject(); + CPPUNIT_ASSERT(pObject1); + const tools::Rectangle& rOutRect1 = pObject1->GetLastBoundRect(); + SdrObject* pObject2 = rFormats2[1]->FindSdrObject(); + CPPUNIT_ASSERT(pObject2); + const tools::Rectangle& rOutRect2 = pObject2->GetLastBoundRect(); + CPPUNIT_ASSERT(rOutRect2.Top() > rOutRect1.Top() && rOutRect2.Top() < rOutRect1.Bottom()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf132160) +{ + load(DATA_DIRECTORY, "tdf132160.odt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // this would crash due to delete redline starting with ToX + dispatchCommand(mxComponent, ".uno:RejectAllTrackedChanges", {}); + + // this would crash due to insert redline ending on table node + dispatchCommand(mxComponent, ".uno:Undo", {}); + + dispatchCommand(mxComponent, ".uno:Redo", {}); + + dispatchCommand(mxComponent, ".uno:Undo", {}); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf52391) +{ + load(DATA_DIRECTORY, "tdf52391.fodt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + dispatchCommand(mxComponent, ".uno:RejectAllTrackedChanges", {}); + + const uno::Reference xRun = getRun(getParagraph(1), 1); + // this was "Portion1", because the tracked background color of Portion1 was + // accepted for "Reject All". Now rejection clears formatting of the text + // in format-only changes, concatenating the text portions in the first paragraph. + CPPUNIT_ASSERT_EQUAL(OUString("Portion1Portion2"), xRun->getString()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf126206) +{ + load(DATA_DIRECTORY, "tdf126206.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // normal text (it was bold) + auto xText = getParagraph(1)->getText(); + CPPUNIT_ASSERT(xText.is()); + { + auto xCursor(xText->createTextCursorByRange(getRun(getParagraph(1), 4))); + CPPUNIT_ASSERT(xCursor.is()); + CPPUNIT_ASSERT_EQUAL(OUString("ipsum"), xCursor->getString()); + CPPUNIT_ASSERT_EQUAL(awt::FontWeight::NORMAL, getProperty(xCursor, "CharWeight")); + } + + // reject tracked changes + dispatchCommand(mxComponent, ".uno:RejectAllTrackedChanges", {}); + + // bold text again + xText = getParagraph(1)->getText(); + CPPUNIT_ASSERT(xText.is()); + { + auto xCursor(xText->createTextCursorByRange(getRun(getParagraph(1), 3))); + CPPUNIT_ASSERT(xCursor.is()); + CPPUNIT_ASSERT_EQUAL(OUString("ipsum"), xCursor->getString()); + CPPUNIT_ASSERT_EQUAL(awt::FontWeight::BOLD, getProperty(xCursor, "CharWeight")); + } +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf101873) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + + SwDocShell* pDocShell = pDoc->GetDocShell(); + CPPUNIT_ASSERT(pDocShell); + + SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); + CPPUNIT_ASSERT(pWrtShell); + + // Insert some content. + pWrtShell->Insert("something"); + + // Search for something which does not exist, twice. + uno::Sequence aFirst(comphelper::InitPropertySequence({ + { "SearchItem.SearchString", uno::makeAny(OUString("fig")) }, + { "SearchItem.Backward", uno::makeAny(false) }, + })); + dispatchCommand(mxComponent, ".uno:ExecuteSearch", aFirst); + dispatchCommand(mxComponent, ".uno:ExecuteSearch", aFirst); + + uno::Sequence aSecond(comphelper::InitPropertySequence({ + { "SearchItem.SearchString", uno::makeAny(OUString("something")) }, + { "SearchItem.Backward", uno::makeAny(false) }, + })); + dispatchCommand(mxComponent, ".uno:ExecuteSearch", aSecond); + + // Without the accompanying fix in place, this test would have failed with "Expected: something; + // Actual:", i.e. searching for "something" failed, even if it was inserted above. + SwShellCursor* pShellCursor = pWrtShell->getShellCursor(false); + CPPUNIT_ASSERT_EQUAL(OUString("something"), pShellCursor->GetText()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTableWidth) +{ + load(DATA_DIRECTORY, "frame_size_export.docx"); + + uno::Reference xStorable(mxComponent, uno::UNO_QUERY); + utl::MediaDescriptor aMediaDescriptor; + aMediaDescriptor["FilterName"] <<= OUString("Office Open XML Text"); + xStorable->storeToURL(maTempFile.GetURL(), aMediaDescriptor.getAsConstPropertyValueList()); + + // after exporting: table width was overwritten in the doc model + uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference xTables(xTablesSupplier->getTextTables(), + uno::UNO_QUERY); + CPPUNIT_ASSERT_EQUAL(sal_Int16(100), + getProperty(xTables->getByIndex(0), "RelativeWidth")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTextFormFieldInsertion) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); + CPPUNIT_ASSERT(pMarkAccess); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Insert a text form field + dispatchCommand(mxComponent, ".uno:TextFormField", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + + // Check whether the fieldmark is created + auto aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + ::sw::mark::IFieldmark* pFieldmark = dynamic_cast<::sw::mark::IFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMTEXT), pFieldmark->GetFieldname()); + + // The text form field has the placeholder text in it + uno::Reference xPara = getParagraph(1); + sal_Unicode vEnSpaces[5] = { 8194, 8194, 8194, 8194, 8194 }; + CPPUNIT_ASSERT_EQUAL(OUString(vEnSpaces, 5), xPara->getString()); + + // Undo insertion + dispatchCommand(mxComponent, ".uno:Undo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + xPara.set(getParagraph(1)); + CPPUNIT_ASSERT(xPara->getString().isEmpty()); + + // Redo insertion + dispatchCommand(mxComponent, ".uno:Redo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + xPara.set(getParagraph(1)); + CPPUNIT_ASSERT_EQUAL(OUString(vEnSpaces, 5), xPara->getString()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testCheckboxFormFieldInsertion) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + + IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); + CPPUNIT_ASSERT(pMarkAccess); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Insert a checkbox form field + dispatchCommand(mxComponent, ".uno:CheckBoxFormField", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + + // Check whether the fieldmark is created + auto aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + ::sw::mark::IFieldmark* pFieldmark = dynamic_cast<::sw::mark::IFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMCHECKBOX), pFieldmark->GetFieldname()); + // The checkbox is not checked by default + ::sw::mark::ICheckboxFieldmark* pCheckBox + = dynamic_cast<::sw::mark::ICheckboxFieldmark*>(pFieldmark); + CPPUNIT_ASSERT(pCheckBox); + CPPUNIT_ASSERT(!pCheckBox->IsChecked()); + + // Undo insertion + dispatchCommand(mxComponent, ".uno:Undo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Redo insertion + dispatchCommand(mxComponent, ".uno:Redo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + pFieldmark = dynamic_cast<::sw::mark::IFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMCHECKBOX), pFieldmark->GetFieldname()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testDropDownFormFieldInsertion) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + + IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); + CPPUNIT_ASSERT(pMarkAccess); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Insert a drop-down form field + dispatchCommand(mxComponent, ".uno:DropDownFormField", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + + // Check whether the fieldmark is created + auto aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + ::sw::mark::IFieldmark* pFieldmark = dynamic_cast<::sw::mark::IFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMDROPDOWN), pFieldmark->GetFieldname()); + // Check drop down field's parameters. By default these params are not set + const sw::mark::IFieldmark::parameter_map_t* const pParameters = pFieldmark->GetParameters(); + auto pListEntries = pParameters->find(ODF_FORMDROPDOWN_LISTENTRY); + CPPUNIT_ASSERT(bool(pListEntries == pParameters->end())); + auto pResult = pParameters->find(ODF_FORMDROPDOWN_RESULT); + CPPUNIT_ASSERT(bool(pResult == pParameters->end())); + + // Undo insertion + dispatchCommand(mxComponent, ".uno:Undo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Redo insertion + dispatchCommand(mxComponent, ".uno:Redo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + pFieldmark = dynamic_cast<::sw::mark::IFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMDROPDOWN), pFieldmark->GetFieldname()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testMixedFormFieldInsertion) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + + IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); + CPPUNIT_ASSERT(pMarkAccess); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Insert fields + dispatchCommand(mxComponent, ".uno:TextFormField", {}); + dispatchCommand(mxComponent, ".uno:CheckBoxFormField", {}); + dispatchCommand(mxComponent, ".uno:DropDownFormField", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(3), pMarkAccess->getAllMarksCount()); + + // Undo insertion + dispatchCommand(mxComponent, ".uno:Undo", {}); + dispatchCommand(mxComponent, ".uno:Undo", {}); + dispatchCommand(mxComponent, ".uno:Undo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Redo insertion + dispatchCommand(mxComponent, ".uno:Redo", {}); + dispatchCommand(mxComponent, ".uno:Redo", {}); + dispatchCommand(mxComponent, ".uno:Redo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(3), pMarkAccess->getAllMarksCount()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf124261) +{ +#if !defined(_WIN32) + // Make sure that pressing a key in a btlr cell frame causes an immediate, correct repaint. + SwDoc* pDoc = createDoc("tdf124261.docx"); + SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); + SwFrame* pPageFrame = pLayout->GetLower(); + CPPUNIT_ASSERT(pPageFrame->IsPageFrame()); + + SwFrame* pBodyFrame = pPageFrame->GetLower(); + CPPUNIT_ASSERT(pBodyFrame->IsBodyFrame()); + + SwFrame* pTabFrame = pBodyFrame->GetLower(); + CPPUNIT_ASSERT(pTabFrame->IsTabFrame()); + + SwFrame* pRowFrame = pTabFrame->GetLower(); + CPPUNIT_ASSERT(pRowFrame->IsRowFrame()); + + SwFrame* pCellFrame = pRowFrame->GetLower(); + CPPUNIT_ASSERT(pCellFrame->IsCellFrame()); + + SwFrame* pFrame = pCellFrame->GetLower(); + CPPUNIT_ASSERT(pFrame->IsTextFrame()); + + // Make sure that the text frame's area and the paint rectangle match. + // Without the accompanying fix in place, this test would have failed with 'Expected: 1721; + // Actual: 1547', i.e. an area other than the text frame was invalidated for a single-line + // paragraph. + SwTextFrame* pTextFrame = static_cast(pFrame); + SwRect aRect = pTextFrame->GetPaintSwRect(); + CPPUNIT_ASSERT_EQUAL(pTextFrame->getFrameArea().Top(), aRect.Top()); +#endif +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testDocxAttributeTableExport) +{ + createDoc("floating-table-position.docx"); + + // get the table frame, set new values and dismiss the references + { + uno::Reference xShape(getShape(1), uno::UNO_QUERY); + + // change the properties + // 8133 -> 8000 + xShape->setPropertyValue("VertOrientPosition", uno::makeAny(static_cast(8000))); + // 5964 -> 5000 + xShape->setPropertyValue("HoriOrientPosition", uno::makeAny(static_cast(5000))); + // 0 (frame) -> 8 (page print area) + xShape->setPropertyValue("VertOrientRelation", uno::makeAny(static_cast(8))); + // 8 (page print area) -> 0 (frame) + xShape->setPropertyValue("HoriOrientRelation", uno::makeAny(static_cast(0))); + } + // save it to docx + reload("Office Open XML Text", "floating-table-position.docx"); + + uno::Reference xShape(getShape(1), uno::UNO_QUERY); + + // test the new values + sal_Int32 nValue = getProperty(xShape, "VertOrientPosition"); + CPPUNIT_ASSERT(sal_Int32(7999) <= nValue && nValue <= sal_Int32(8001)); + nValue = getProperty(xShape, "HoriOrientPosition"); + CPPUNIT_ASSERT(sal_Int32(4999) <= nValue && nValue <= sal_Int32(5001)); + + CPPUNIT_ASSERT_EQUAL(sal_Int16(8), getProperty(xShape, "VertOrientRelation")); + CPPUNIT_ASSERT_EQUAL(sal_Int16(0), getProperty(xShape, "HoriOrientRelation")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf118699_redline_numbering) +{ + load(DATA_DIRECTORY, "tdf118699.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); + rIDRA.AcceptAllRedline(true); + + uno::Reference xProps(getParagraph(2), uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("first paragraph after the first deletion: erroneous numbering", + !xProps->getPropertyValue("NumberingRules").hasValue()); + + CPPUNIT_ASSERT_MESSAGE( + "first paragraph after the second deletion: missing numbering", + getProperty>(getParagraph(5), "NumberingRules") + .is()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf125881_redline_list_level) +{ + load(DATA_DIRECTORY, "tdf125881.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + uno::Reference xProps(getParagraph(8), uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("deleted paragraph: erroneous numbering", + !xProps->getPropertyValue("NumberingRules").hasValue()); + + // deleted paragraph gets the numbering of the next paragraph + uno::Reference xProps2(getParagraph(9), uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("first paragraph after the first deletion: missing numbering", + xProps2->getPropertyValue("NumberingRules").hasValue()); + + // check numbering level at deletion (1 instead of 0) + CPPUNIT_ASSERT_EQUAL(sal_Int16(1), getProperty(getParagraph(9), "NumberingLevel")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf125916_redline_restart_numbering) +{ + load(DATA_DIRECTORY, "tdf125916.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); + rIDRA.AcceptAllRedline(true); + + // check unnecessary numbering + uno::Reference xProps(getParagraph(3), uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("first paragraph after the first deletion: erroneous numbering", + !xProps->getPropertyValue("NumberingRules").hasValue()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf125310) +{ + load(DATA_DIRECTORY, "tdf125310.fodt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(1), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(1, getPages()); + + // turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowDelete + | RedlineFlags::ShowInsert); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE( + "redlines should be visible", + IDocumentRedlineAccess::IsShowChanges(pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + // paragraph join + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/false, 1, /*bBasicCall=*/false); + pWrtShell->EndPara(/*bSelect=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 1, /*bBasicCall=*/false); + rtl::Reference pTransfer = new SwTransferable(*pWrtShell); + pTransfer->Cut(); + + // copied paragraph style + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + + // without copying the page break + CPPUNIT_ASSERT_EQUAL(1, getPages()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf125310b) +{ + SwDoc* pDoc = createDoc("tdf125310b.fodt"); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(3), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(2, getPages()); + + // turn on red-lining and show changes + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowDelete + | RedlineFlags::ShowInsert); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + + // remove second paragraph with the page break + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Down(/*bSelect=*/false); + pWrtShell->Up(/*bSelect=*/true); + pWrtShell->DelLeft(); + + IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); + rIDRA.AcceptAllRedline(true); + + // losing the page break, as without redlining + CPPUNIT_ASSERT_EQUAL(1, getPages()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf120336) +{ + load(DATA_DIRECTORY, "tdf120336.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + // turn on red-lining and show changes + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + pDoc->getIDocumentRedlineAccess().SetRedlineFlags(RedlineFlags::On | RedlineFlags::ShowDelete + | RedlineFlags::ShowInsert); + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); + CPPUNIT_ASSERT_MESSAGE( + "redlines should be visible", + IDocumentRedlineAccess::IsShowChanges(pDoc->getIDocumentRedlineAccess().GetRedlineFlags())); + + CPPUNIT_ASSERT_EQUAL(2, getPages()); + + IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); + rIDRA.AcceptAllRedline(true); + + // keep page break, as without redlining + CPPUNIT_ASSERT_EQUAL(2, getPages()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf106843) +{ + load(DATA_DIRECTORY, "tdf106843.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + + // try to turn off red-lining + dispatchCommand(mxComponent, ".uno:TrackChanges", {}); + + // but the protection doesn't allow it + CPPUNIT_ASSERT_MESSAGE("redlining should be on", + pDoc->getIDocumentRedlineAccess().IsRedlineOn()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testImageComment) +{ + // Load a document with an as-char image in it. + SwDoc* pDoc = createDoc("image-comment.odt"); + SwView* pView = pDoc->GetDocShell()->GetView(); + + // Test document has "beforeafter", remove the content before the image. + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + pWrtShell->SttEndDoc(/*bStart=*/true); + pWrtShell->Right(CRSR_SKIP_CHARS, /*bSelect=*/true, 6, /*bBasicCall=*/false); + pWrtShell->Delete(); + + // Select the image. + pView->GetViewFrame()->GetDispatcher()->Execute(FN_CNTNT_TO_NEXT_FRAME, SfxCallMode::SYNCHRON); + + // Insert a comment while the image is selected. + pView->GetViewFrame()->GetDispatcher()->Execute(FN_POSTIT, SfxCallMode::SYNCHRON); + + // Verify that the comment is around the image. + // Without the accompanying fix in place, this test would have failed, as FN_POSTIT was disabled + // in the frame shell. + // Then this test would have failed, as in case the as-char anchored image was at the start of + // the paragraph, the comment of the image covered the character after the image, not the image. + uno::Reference xPara = getParagraph(1); + CPPUNIT_ASSERT_EQUAL(OUString("Annotation"), + getProperty(getRun(xPara, 1), "TextPortionType")); + CPPUNIT_ASSERT_EQUAL(OUString("Frame"), + getProperty(getRun(xPara, 2), "TextPortionType")); + CPPUNIT_ASSERT_EQUAL(OUString("AnnotationEnd"), + getProperty(getRun(xPara, 3), "TextPortionType")); + CPPUNIT_ASSERT_EQUAL(OUString("Text"), + getProperty(getRun(xPara, 4), "TextPortionType")); + + // Insert content to the comment, and select the image again. + SfxStringItem aItem(FN_INSERT_STRING, "x"); + pView->GetViewFrame()->GetDispatcher()->ExecuteList(FN_INSERT_STRING, SfxCallMode::SYNCHRON, + { &aItem }); + pView->GetViewFrame()->GetDispatcher()->Execute(FN_CNTNT_TO_NEXT_FRAME, SfxCallMode::SYNCHRON); + +#if !defined(MACOSX) + // Calc the left edge of the as-char frame. + SwRootFrame* pLayout = pWrtShell->GetLayout(); + SwFrame* pPage = pLayout->GetLower(); + SwFrame* pBody = pPage->GetLower(); + SwFrame* pTextFrame = pBody->GetLower(); + CPPUNIT_ASSERT(pTextFrame->GetDrawObjs()); + const SwSortedObjs& rAnchored = *pTextFrame->GetDrawObjs(); + CPPUNIT_ASSERT_GREATER(static_cast(0), rAnchored.size()); + SwAnchoredObject* pObject = rAnchored[0]; + long nFrameLeft = pObject->GetObjRect().Left(); + long nFrameTop = pObject->GetObjRect().Top(); + + // Make sure that the anchor points to the bottom left corner of the image. + // Without the accompanying fix in place, this test would have failed with: + // - Expected less or equal than: 1418 + // - Actual: 2442 + // The anchor pointed to the bottom right corner, so as-char and at-char was inconsistent. + Scheduler::ProcessEventsToIdle(); + SwPostItMgr* pPostItMgr = pView->GetPostItMgr(); + for (const auto& pItem : *pPostItMgr) + { + const SwRect& rAnchor = pItem->pPostIt->GetAnchorRect(); + CPPUNIT_ASSERT_EQUAL(nFrameLeft, rAnchor.Left()); + } + + // Test the comment anchor we expose via the LOK API. + // Without the accompanying fix in place, this test would have failed with: + // - Expected: 1418, 1418, 0, 0 + // - Actual : 1418, 1418, 1024, 1024 + // I.e. the anchor position had a non-empty size, which meant different rendering via tiled + // rendering and on the desktop. + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + OUString aPostits = pTextDoc->getPostIts(); + std::stringstream aStream(aPostits.toUtf8().getStr()); + boost::property_tree::ptree aTree; + boost::property_tree::read_json(aStream, aTree); + for (const boost::property_tree::ptree::value_type& rValue : aTree.get_child("comments")) + { + const boost::property_tree::ptree& rComment = rValue.second; + OString aAnchorPos(rComment.get("anchorPos").c_str()); + OString aExpected + = OString::number(nFrameLeft) + ", " + OString::number(nFrameTop) + ", 0, 0"; + CPPUNIT_ASSERT_EQUAL(aExpected, aAnchorPos); + } + +#endif + + // Now delete the image. + pView->GetViewFrame()->GetDispatcher()->Execute(SID_DELETE, SfxCallMode::SYNCHRON); + // Without the accompanying fix in place, this test would have failed with 'Expected: 0; Actual: + // 1', i.e. the comment of the image was not deleted when the image was deleted. + CPPUNIT_ASSERT_EQUAL(static_cast(0), + pDoc->getIDocumentMarkAccess()->getAnnotationMarksCount()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testImageCommentAtChar) +{ + // Load a document with an at-char image in it. + SwDoc* pDoc = createDoc("image-comment-at-char.odt"); + SwView* pView = pDoc->GetDocShell()->GetView(); + + // Select the image. + pView->GetViewFrame()->GetDispatcher()->Execute(FN_CNTNT_TO_NEXT_FRAME, SfxCallMode::SYNCHRON); + + // Insert a comment while the image is selected. + pView->GetViewFrame()->GetDispatcher()->Execute(FN_POSTIT, SfxCallMode::SYNCHRON); + + // Verify that the comment is around the image. + // Without the accompanying fix in place, this test would have failed, as the comment was + // anchored at the end of the paragraph, it was not around the image. + uno::Reference xPara = getParagraph(1); + CPPUNIT_ASSERT_EQUAL(OUString("Text"), + getProperty(getRun(xPara, 1), "TextPortionType")); + CPPUNIT_ASSERT_EQUAL(OUString("Annotation"), + getProperty(getRun(xPara, 2), "TextPortionType")); + CPPUNIT_ASSERT_EQUAL(OUString("Frame"), + getProperty(getRun(xPara, 3), "TextPortionType")); + CPPUNIT_ASSERT_EQUAL(OUString("AnnotationEnd"), + getProperty(getRun(xPara, 4), "TextPortionType")); + CPPUNIT_ASSERT_EQUAL(OUString("Text"), + getProperty(getRun(xPara, 5), "TextPortionType")); + + // Insert content to the comment, and select the image again. + SfxStringItem aItem(FN_INSERT_STRING, "x"); + pView->GetViewFrame()->GetDispatcher()->ExecuteList(FN_INSERT_STRING, SfxCallMode::SYNCHRON, + { &aItem }); + pView->GetViewFrame()->GetDispatcher()->Execute(FN_CNTNT_TO_NEXT_FRAME, SfxCallMode::SYNCHRON); + // Now delete the image. + pView->GetViewFrame()->GetDispatcher()->Execute(SID_DELETE, SfxCallMode::SYNCHRON); + // Without the accompanying fix in place, this test would have failed with 'Expected: 0; Actual: + // 1', i.e. the comment of the image was not deleted when the image was deleted. + CPPUNIT_ASSERT_EQUAL(static_cast(0), + pDoc->getIDocumentMarkAccess()->getAnnotationMarksCount()); + + // Undo the deletion and move the image down, so the anchor changes. + pView->GetViewFrame()->GetDispatcher()->Execute(SID_UNDO, SfxCallMode::SYNCHRON); + CPPUNIT_ASSERT_EQUAL(static_cast(1), + pDoc->getIDocumentMarkAccess()->getAnnotationMarksCount()); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + Point aNewAnchor = pWrtShell->GetFlyRect().TopLeft(); + aNewAnchor.Move(0, 600); + pWrtShell->SetFlyPos(aNewAnchor); + + // Get the image anchor doc model position. + SwFlyFrame* pFly = pWrtShell->GetCurrFlyFrame(false); + CPPUNIT_ASSERT(pFly); + SwFrameFormat& rFlyFormat = pFly->GetFrameFormat(); + const SwPosition* pImageAnchor = rFlyFormat.GetAnchor().GetContentAnchor(); + CPPUNIT_ASSERT(pImageAnchor); + + // Get the annotation mark doc model start. + auto it = pDoc->getIDocumentMarkAccess()->getAnnotationMarksBegin(); + CPPUNIT_ASSERT(it != pDoc->getIDocumentMarkAccess()->getAnnotationMarksEnd()); + const sw::mark::IMark* pMark = *it; + const SwPosition& rAnnotationMarkStart = pMark->GetMarkPos(); + + // Without the accompanying fix in place, this test would have failed with: + // - Expected: SwPosition (node 14, offset 15) + // - Actual : SwPosition (node 12, offset 3) + // This means moving the image anchor did not move the comment anchor / annotation mark, so the + // image and its comment got out of sync. + CPPUNIT_ASSERT_EQUAL(*pImageAnchor, rAnnotationMarkStart); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf120338) +{ + load(DATA_DIRECTORY, "tdf120338.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), + getProperty(getParagraph(2), "ParaAdjust")); // right + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), + getProperty(getParagraph(3), "ParaAdjust")); // right + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), + getProperty(getParagraph(4), "ParaAdjust")); // left + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), + getProperty(getParagraph(5), "ParaAdjust")); // right + + CPPUNIT_ASSERT_EQUAL(OUString(""), + getProperty(getParagraph(7), "NumberingStyleName")); + + CPPUNIT_ASSERT_EQUAL(OUString("WWNum2"), + getProperty(getParagraph(8), "NumberingStyleName")); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(10), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(11), "ParaStyleName")); + + // reject tracked paragraph adjustments + dispatchCommand(mxComponent, ".uno:RejectAllTrackedChanges", {}); + + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), + getProperty(getParagraph(2), "ParaAdjust")); // left + CPPUNIT_ASSERT_EQUAL(sal_Int32(3), + getProperty(getParagraph(3), "ParaAdjust")); // center + CPPUNIT_ASSERT_EQUAL(sal_Int32(3), + getProperty(getParagraph(4), "ParaAdjust")); // center + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), + getProperty(getParagraph(5), "ParaAdjust")); // left + + // tdf#126245 revert numbering changes + CPPUNIT_ASSERT_EQUAL(OUString("WWNum2"), + getProperty(getParagraph(7), "NumberingStyleName")); + + CPPUNIT_ASSERT_EQUAL(OUString(""), + getProperty(getParagraph(8), "NumberingStyleName")); + + // tdf#126243 revert paragraph styles + CPPUNIT_ASSERT_EQUAL(OUString("Standard"), + getProperty(getParagraph(10), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Heading 3"), + getProperty(getParagraph(11), "ParaStyleName")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf120338_multiple_paragraph_join) +{ + load(DATA_DIRECTORY, "redline-para-join.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(1), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(3), "ParaStyleName")); + + // reject tracked paragraph styles + dispatchCommand(mxComponent, ".uno:RejectAllTrackedChanges", {}); + + CPPUNIT_ASSERT_EQUAL(OUString("Heading 1"), + getProperty(getParagraph(1), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Heading 2"), + getProperty(getParagraph(2), "ParaStyleName")); + CPPUNIT_ASSERT_EQUAL(OUString("Heading 3"), + getProperty(getParagraph(3), "ParaStyleName")); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testShapePageMove) +{ + // Load a document with 2 pages, shape on the first page. + SwDoc* pDoc = createDoc("shape-page-move.odt"); + SwView* pView = pDoc->GetDocShell()->GetView(); + // Make sure that the 2nd page is below the 1st one. + pView->SetViewLayout(/*nColumns=*/1, /*bBookMode=*/false); + calcLayout(); + + // Select the shape. + pView->GetViewFrame()->GetDispatcher()->Execute(FN_CNTNT_TO_NEXT_FRAME, SfxCallMode::SYNCHRON); + // Make sure SwTextShell is replaced with SwDrawShell right now, not after 120 ms, as set in the + // SwView ctor. + pView->StopShellTimer(); + + // Move the shape down to the 2nd page. + SfxInt32Item aXItem(SID_ATTR_TRANSFORM_POS_X, 4000); + SfxInt32Item aYItem(SID_ATTR_TRANSFORM_POS_Y, 12000); + pView->GetViewFrame()->GetDispatcher()->ExecuteList(SID_ATTR_TRANSFORM, SfxCallMode::SYNCHRON, + { &aXItem, &aYItem }); + + // Check if the shape anchor was moved to the 2nd page as well. + SwFrameFormats* pShapeFormats = pDoc->GetSpzFrameFormats(); + CPPUNIT_ASSERT(!pShapeFormats->empty()); + auto it = pShapeFormats->begin(); + SwFrameFormat* pShapeFormat = *it; + const SwPosition* pAnchor = pShapeFormat->GetAnchor().GetContentAnchor(); + CPPUNIT_ASSERT(pAnchor); + + // Find out the node index of the 1st para on the 2nd page. + SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); + SwFrame* pFirstPage = pLayout->Lower(); + SwFrame* pSecondPage = pFirstPage->GetNext(); + CPPUNIT_ASSERT(pSecondPage->IsLayoutFrame()); + SwFrame* pBodyFrame = static_cast(pSecondPage)->GetLower(); + CPPUNIT_ASSERT(pBodyFrame->IsLayoutFrame()); + SwFrame* pTextFrame = static_cast(pBodyFrame)->GetLower(); + CPPUNIT_ASSERT(pTextFrame->IsTextFrame()); + sal_uLong nNodeIndex = static_cast(pTextFrame)->GetTextNodeFirst()->GetIndex(); + + // Without the accompanying fix in place, this test would have failed with "Expected: 13; + // Actual: 12", i.e. the shape was anchored to the last paragraph of the 1st page, not to a + // paragraph on the 2nd page. + CPPUNIT_ASSERT_EQUAL(nNodeIndex, pAnchor->nNode.GetIndex()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testDateFormFieldInsertion) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); + CPPUNIT_ASSERT(pMarkAccess); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Insert a date form field + dispatchCommand(mxComponent, ".uno:DatePickerFormField", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + + // Check whether the fieldmark is created + auto aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + ::sw::mark::IFieldmark* pFieldmark = dynamic_cast<::sw::mark::IFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMDATE), pFieldmark->GetFieldname()); + + // The date form field has the placeholder text in it + uno::Reference xPara = getParagraph(1); + sal_Unicode vEnSpaces[5] = { 8194, 8194, 8194, 8194, 8194 }; + CPPUNIT_ASSERT_EQUAL(OUString(vEnSpaces, 5), xPara->getString()); + + // Undo insertion + dispatchCommand(mxComponent, ".uno:Undo", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Redo insertion + dispatchCommand(mxComponent, ".uno:Redo", {}); + aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + pFieldmark = dynamic_cast<::sw::mark::IFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMDATE), pFieldmark->GetFieldname()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testDateFormFieldContentOperations) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); + CPPUNIT_ASSERT(pMarkAccess); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Insert a date form field + dispatchCommand(mxComponent, ".uno:DatePickerFormField", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + + // Check whether the fieldmark is created + auto aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + ::sw::mark::IDateFieldmark* pFieldmark = dynamic_cast<::sw::mark::IDateFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMDATE), pFieldmark->GetFieldname()); + + // Check the default content added by insertion + uno::Reference xPara = getParagraph(1); + sal_Unicode vEnSpaces[5] = { 8194, 8194, 8194, 8194, 8194 }; + CPPUNIT_ASSERT_EQUAL(OUString(vEnSpaces, 5), pFieldmark->GetContent()); + + // Set content to empty string + pFieldmark->ReplaceContent(""); + CPPUNIT_ASSERT_EQUAL(OUString(""), pFieldmark->GetContent()); + + // Replace empty string with a valid content + pFieldmark->ReplaceContent("2019-10-23"); + CPPUNIT_ASSERT_EQUAL(OUString("2019-10-23"), pFieldmark->GetContent()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testDateFormFieldCurrentDateHandling) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); + CPPUNIT_ASSERT(pMarkAccess); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Insert a date form field + dispatchCommand(mxComponent, ".uno:DatePickerFormField", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + + // Check whether the fieldmark is created + auto aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + ::sw::mark::IDateFieldmark* pFieldmark = dynamic_cast<::sw::mark::IDateFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMDATE), pFieldmark->GetFieldname()); + + // The default content is not a valid date + uno::Reference xPara = getParagraph(1); + sal_Unicode vEnSpaces[5] = { 8194, 8194, 8194, 8194, 8194 }; + CPPUNIT_ASSERT_EQUAL(OUString(vEnSpaces, 5), pFieldmark->GetContent()); + std::pair aResult = pFieldmark->GetCurrentDate(); + CPPUNIT_ASSERT(!aResult.first); + + // Check empty string + pFieldmark->ReplaceContent(""); + aResult = pFieldmark->GetCurrentDate(); + CPPUNIT_ASSERT(!aResult.first); + + // Check valid date + // Set date format first + sw::mark::IFieldmark::parameter_map_t* pParameters = pFieldmark->GetParameters(); + (*pParameters)[ODF_FORMDATE_DATEFORMAT] <<= OUString("YYYY/MM/DD"); + (*pParameters)[ODF_FORMDATE_DATEFORMAT_LANGUAGE] <<= OUString("en-US"); + + // Set date value and check whether the content is formatted correctly + pFieldmark->SetCurrentDate(48000.0); + aResult = pFieldmark->GetCurrentDate(); + CPPUNIT_ASSERT(aResult.first); + CPPUNIT_ASSERT_EQUAL(48000.0, aResult.second); + CPPUNIT_ASSERT_EQUAL(OUString("2031/06/01"), pFieldmark->GetContent()); + // Current date param contains date in a "standard format" + OUString sCurrentDate; + auto pResult = pParameters->find(ODF_FORMDATE_CURRENTDATE); + if (pResult != pParameters->end()) + { + pResult->second >>= sCurrentDate; + } + CPPUNIT_ASSERT_EQUAL(OUString("2031-06-01"), sCurrentDate); +} + +#if !defined(_WIN32) +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testDateFormFieldCurrentDateInvalidation) +{ + SwDoc* pDoc = createDoc(); + CPPUNIT_ASSERT(pDoc); + IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); + CPPUNIT_ASSERT(pMarkAccess); + CPPUNIT_ASSERT_EQUAL(sal_Int32(0), pMarkAccess->getAllMarksCount()); + + // Insert a date form field + dispatchCommand(mxComponent, ".uno:DatePickerFormField", {}); + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); + + // Check whether the fieldmark is created + auto aIter = pMarkAccess->getAllMarksBegin(); + CPPUNIT_ASSERT(aIter != pMarkAccess->getAllMarksEnd()); + ::sw::mark::IDateFieldmark* pFieldmark = dynamic_cast<::sw::mark::IDateFieldmark*>(*aIter); + CPPUNIT_ASSERT(pFieldmark); + CPPUNIT_ASSERT_EQUAL(OUString(ODF_FORMDATE), pFieldmark->GetFieldname()); + + // Set a date first + sw::mark::IFieldmark::parameter_map_t* pParameters = pFieldmark->GetParameters(); + pFieldmark->SetCurrentDate(48000.0); + std::pair aResult = pFieldmark->GetCurrentDate(); + CPPUNIT_ASSERT(aResult.first); + CPPUNIT_ASSERT_EQUAL(48000.0, aResult.second); + + // Do the layouting to trigger invalidation + // Since we have the current date consistent with the field content + // This invalidation won't change anything + calcLayout(); + Scheduler::ProcessEventsToIdle(); + + // Current date param contains date in a "standard format" + OUString sCurrentDate; + auto pResult = pParameters->find(ODF_FORMDATE_CURRENTDATE); + if (pResult != pParameters->end()) + { + pResult->second >>= sCurrentDate; + } + // We have the current date parameter set + CPPUNIT_ASSERT_EQUAL(OUString("2031-06-01"), sCurrentDate); + + // Now change the content of the field + pFieldmark->ReplaceContent("[select date]"); + // Do the layouting to trigger invalidation + calcLayout(); + Scheduler::ProcessEventsToIdle(); + + sCurrentDate.clear(); + pResult = pParameters->find(ODF_FORMDATE_CURRENTDATE); + if (pResult != pParameters->end()) + { + pResult->second >>= sCurrentDate; + } + CPPUNIT_ASSERT_EQUAL(OUString(""), sCurrentDate); +} +#endif + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testOleSaveWhileEdit) +{ + // Enable LOK mode, otherwise OCommonEmbeddedObject::SwitchStateTo_Impl() will throw when it + // finds out that the test runs headless. + comphelper::LibreOfficeKit::setActive(); + + // Load a document with a Draw doc in it. + SwDoc* pDoc = createDoc("ole-save-while-edit.odt"); + SwWrtShell* pWrtShell = pDoc->GetDocShell()->GetWrtShell(); + pWrtShell->GotoObj(/*bNext=*/true, GotoObjFlags::Any); + + // Select the frame and switch to the frame shell. + SwView* pView = pDoc->GetDocShell()->GetView(); + pView->StopShellTimer(); + + // Start editing the OLE object. + pWrtShell->LaunchOLEObj(); + + // Save the document without existing the OLE edit. + uno::Reference xStorable(mxComponent, uno::UNO_QUERY); + xStorable->storeToURL(maTempFile.GetURL(), {}); + + uno::Reference xNameAccess + = packages::zip::ZipFileAccess::createWithURL(comphelper::getComponentContext(m_xSFactory), + maTempFile.GetURL()); + // Without the accompanying fix in place, this test would have failed: the OLE object lost its + // replacement on save if the edit was active while saving. + CPPUNIT_ASSERT(xNameAccess->hasByName("ObjectReplacements/Object 1")); + + // Dispose the document while LOK is still active to avoid leaks. + mxComponent->dispose(); + mxComponent.clear(); + comphelper::LibreOfficeKit::setActive(false); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf105330) +{ + load(DATA_DIRECTORY, "tdf105330.odt"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + SwWrtShell* pWrtShell = pTextDoc->GetDocShell()->GetWrtShell(); + pWrtShell->Down(/*bSelect=*/false); + SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc(); + SwView* pView = pDoc->GetDocShell()->GetView(); + SfxUInt16Item aRows(SID_ATTR_TABLE_ROW, 1); + SfxUInt16Item aColumns(SID_ATTR_TABLE_COLUMN, 1); + pView->GetViewFrame()->GetDispatcher()->ExecuteList(FN_INSERT_TABLE, SfxCallMode::SYNCHRON, + { &aRows, &aColumns }); + + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + rUndoManager.Undo(); + + // Without the accompanying fix in place, height was only 1 twips (practically invisible). + // Require at least 12pt height (font size under the cursor), in twips. + CPPUNIT_ASSERT_GREATEREQUAL( + static_cast(240), + pWrtShell->GetVisibleCursor()->GetTextCursor().GetSize().getHeight()); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf118311) +{ + load(DATA_DIRECTORY, "tdf118311.fodt"); + + SwXTextDocument* pDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pDoc); + + SwDocShell* pDocShell = pDoc->GetDocShell(); + CPPUNIT_ASSERT(pDocShell); + + SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); + CPPUNIT_ASSERT(pWrtShell); + + // Jump to the first cell, selecting its content + uno::Sequence aSearch(comphelper::InitPropertySequence({ + { "SearchItem.SearchString", uno::makeAny(OUString("a")) }, + { "SearchItem.Backward", uno::makeAny(false) }, + })); + dispatchCommand(mxComponent, ".uno:ExecuteSearch", aSearch); + + // .uno:Cut doesn't remove the table, only the selected content of the first cell + dispatchCommand(mxComponent, ".uno:Cut", {}); + + xmlDocUniquePtr pXmlDoc = parseLayoutDump(); + assertXPath(pXmlDoc, "//page[1]//body/tab"); + + // .uno:SelectAll selects the whole table, and UNO command Cut cuts it + dispatchCommand(mxComponent, ".uno:SelectAll", {}); + dispatchCommand(mxComponent, ".uno:Cut", {}); + + discardDumpedLayout(); + pXmlDoc = parseLayoutDump(); + assertXPath(pXmlDoc, "//page[1]//body/tab", 0); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf128335) +{ + // Load the bugdoc, which has 3 textboxes. + SwDoc* pDoc = createDoc("tdf128335.odt"); + + // Select the 3rd textbox. + SwView* pView = pDoc->GetDocShell()->GetView(); + pView->GetViewFrame()->GetDispatcher()->Execute(FN_CNTNT_TO_NEXT_FRAME, SfxCallMode::SYNCHRON); + // Make sure SwTextShell is replaced with SwDrawShell right now, not after 120 ms, as set in the + // SwView ctor. + pView->StopShellTimer(); + SwXTextDocument* pXTextDocument = dynamic_cast(mxComponent.get()); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYINPUT, 0, KEY_TAB); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYUP, 0, KEY_TAB); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYINPUT, 0, KEY_TAB); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYUP, 0, KEY_TAB); + Scheduler::ProcessEventsToIdle(); + + // Cut it. + pView->GetViewFrame()->GetDispatcher()->Execute(SID_CUT, SfxCallMode::SYNCHRON); + + // Paste it: this makes the 3rd textbox anchored in the 2nd one. + pView->GetViewFrame()->GetDispatcher()->Execute(SID_PASTE, SfxCallMode::SYNCHRON); + + // Select all shapes. + uno::Reference xSelectionSupplier( + pXTextDocument->getCurrentController(), uno::UNO_QUERY); + xSelectionSupplier->select(pXTextDocument->getDrawPages()->getByIndex(0)); + + // Cut them. + // Without the accompanying fix in place, this test would have crashed as the textboxes were + // deleted in an incorrect order. + pView->GetViewFrame()->GetDispatcher()->Execute(SID_CUT, SfxCallMode::SYNCHRON); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf128603) +{ + // Load the bugdoc, which has 3 textboxes. + SwDoc* pDoc = createDoc("tdf128603.odt"); + + // Select the 3rd textbox. + SwView* pView = pDoc->GetDocShell()->GetView(); + pView->GetViewFrame()->GetDispatcher()->Execute(FN_CNTNT_TO_NEXT_FRAME, SfxCallMode::SYNCHRON); + // Make sure SwTextShell is replaced with SwDrawShell right now, not after 120 ms, as set in the + // SwView ctor. + pView->StopShellTimer(); + SwXTextDocument* pXTextDocument = dynamic_cast(mxComponent.get()); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYINPUT, 0, KEY_TAB); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYUP, 0, KEY_TAB); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYINPUT, 0, KEY_TAB); + pXTextDocument->postKeyEvent(LOK_KEYEVENT_KEYUP, 0, KEY_TAB); + Scheduler::ProcessEventsToIdle(); + + // Cut it. + pView->GetViewFrame()->GetDispatcher()->Execute(SID_CUT, SfxCallMode::SYNCHRON); + + // Paste it: this makes the 3rd textbox anchored in the 2nd one. + pView->GetViewFrame()->GetDispatcher()->Execute(SID_PASTE, SfxCallMode::SYNCHRON); + + // Undo all of this. + sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); + rUndoManager.Undo(); + rUndoManager.Undo(); + + // Make sure the content indexes still match. + const SwFrameFormats& rSpzFrameFormats = *pDoc->GetSpzFrameFormats(); + CPPUNIT_ASSERT_EQUAL(static_cast(6), rSpzFrameFormats.size()); + const SwNodeIndex* pIndex4 = rSpzFrameFormats[4]->GetContent().GetContentIdx(); + CPPUNIT_ASSERT(pIndex4); + const SwNodeIndex* pIndex5 = rSpzFrameFormats[5]->GetContent().GetContentIdx(); + CPPUNIT_ASSERT(pIndex5); + // Without the accompanying fix in place, this test would have failed with: + // - Expected: 11 + // - Actual : 14 + // i.e. the shape content index and the frame content index did not match after undo, even if + // their "other text box format" pointers pointed to each other. + CPPUNIT_ASSERT_EQUAL(pIndex4->GetIndex(), pIndex5->GetIndex()); +} + +// only care that it doesn't assert/crash +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testOfz18563) +{ + OUString sURL(m_directories.getURLFromSrc("/sw/qa/extras/uiwriter/data2/ofz18563.docx")); + SvFileStream aFileStream(sURL, StreamMode::READ); + TestImportDOCX(aFileStream); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf90069) +{ + SwDoc* pDoc = createDoc("tdf90069.docx"); + + SwXTextDocument* pTextDoc = dynamic_cast(mxComponent.get()); + CPPUNIT_ASSERT(pTextDoc); + + SwDocShell* pDocShell = pTextDoc->GetDocShell(); + CPPUNIT_ASSERT(pDocShell); + + SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); + CPPUNIT_ASSERT(pWrtShell); + + sal_uLong nIndex = pWrtShell->GetCursor()->GetNode().GetIndex(); + + dispatchCommand(mxComponent, ".uno:InsertRowsAfter", {}); + pWrtShell->Down(false); + pWrtShell->Insert("foo"); + + SwTextNode* pTextNodeA1 = static_cast(pDoc->GetNodes()[nIndex]); + CPPUNIT_ASSERT(pTextNodeA1->GetText().startsWith("Insert")); + nIndex = pWrtShell->GetCursor()->GetNode().GetIndex(); + SwTextNode* pTextNodeA2 = static_cast(pDoc->GetNodes()[nIndex]); + CPPUNIT_ASSERT_EQUAL(OUString("foo"), pTextNodeA2->GetText()); + CPPUNIT_ASSERT_EQUAL(true, pTextNodeA2->GetSwAttrSet().HasItem(RES_CHRATR_FONT)); + OUString sFontName = pTextNodeA2->GetSwAttrSet().GetItem(RES_CHRATR_FONT)->GetFamilyName(); + CPPUNIT_ASSERT_EQUAL(OUString("Lohit Devanagari"), sFontName); +} + +CPPUNIT_TEST_FIXTURE(SwUiWriterTest2, testTdf129655) +{ + createDoc("tdf129655-vtextbox.odt"); + xmlDocUniquePtr pXmlDoc = parseLayoutDump(); + assertXPath(pXmlDoc, "//fly/txt[@WritingMode='Vertical']", 1); +} +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3