From 940b4d1848e8c70ab7642901a68594e8016caffc Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 18:51:28 +0200 Subject: Adding upstream version 1:7.0.4. Signed-off-by: Daniel Baumann --- .../source/resources/resources_en_US.properties | 579 +++++++++++++++++++++ 1 file changed, 579 insertions(+) create mode 100644 wizards/source/resources/resources_en_US.properties (limited to 'wizards/source/resources') diff --git a/wizards/source/resources/resources_en_US.properties b/wizards/source/resources/resources_en_US.properties new file mode 100644 index 000000000..b87e6aaa7 --- /dev/null +++ b/wizards/source/resources/resources_en_US.properties @@ -0,0 +1,579 @@ +# +# This file is part of the LibreOffice project. +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# This file incorporates work covered by the following license notice: +# +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed +# with this work for additional information regarding copyright +# ownership. The ASF licenses this file to you under the Apache +# License, Version 2.0 (the "License; you may not use this file +# except in compliance with the License. You may obtain a copy of +# the License at http://www.apache.org/licenses/LICENSE-2.0 . +# +# x-no-translate + +# +# resources.properties +# +# resources for com.sun.star.wizards +# +RID_COMMON_0=The directory '%1' could not be created.
There may not be enough space left on your hard disk. +RID_COMMON_1=The text document could not be created.
Please check if the module 'PRODUCTNAME Writer' is installed. +RID_COMMON_2=The spreadsheet could not be created.
Please check if the module 'PRODUCTNAME Calc' is installed. +RID_COMMON_3=The presentation could not be created.
Please check if the module 'PRODUCTNAME Impress' is installed. +RID_COMMON_4=The drawing could not be created.
Please check if the module 'PRODUCTNAME Draw' is installed. +RID_COMMON_5=The formula could not be created.
Please check if the module 'PRODUCTNAME Math' is installed. +RID_COMMON_6=The files required could not be found.
Please start the %PRODUCTNAME Setup and choose 'Repair'. +RID_COMMON_7=The file '' already exists.

Would you like to overwrite the existing file? +RID_COMMON_8=Yes +RID_COMMON_9=Yes to All +RID_COMMON_10=No +RID_COMMON_11=Cancel +RID_COMMON_12=~Finish +RID_COMMON_13=< ~Back +RID_COMMON_14=~Next > +RID_COMMON_15=~Help +RID_COMMON_16=Steps +RID_COMMON_17=Close +RID_COMMON_18=OK +RID_COMMON_19=The file already exists. Do you want to overwrite it? +RID_COMMON_20=Template created via on . +RID_COMMON_21=The wizard could not be run, because important files were not found.\nUnder 'Tools - Options - %PRODUCTNAME - Paths' click the 'Default' button to reset the paths to the original default settings.\nThen run the wizard again. +RID_REPORT_0=Report Wizard +RID_REPORT_3=~Table +RID_REPORT_4=Colu~mns +RID_REPORT_7=Report_ +RID_REPORT_8=- undefined - +RID_REPORT_9=~Fields in report +RID_REPORT_11=Grouping +RID_REPORT_12=Sort options +RID_REPORT_13=Choose layout +RID_REPORT_14=Create report +RID_REPORT_15=Layout of data +RID_REPORT_16=Layout of headers and footers +RID_REPORT_19=Fields +RID_REPORT_20=~Sort by +RID_REPORT_21=T~hen by +RID_REPORT_22=Orientation +RID_REPORT_23=Portrait +RID_REPORT_24=Landscape +RID_REPORT_28=Which fields do you want to have in your report? +RID_REPORT_29=Do you want to add grouping levels? +RID_REPORT_30=According to which fields do you want to sort the data? +RID_REPORT_31=How do you want your report to look? +RID_REPORT_32=Decide how you want to proceed +RID_REPORT_33=Title of report +RID_REPORT_34=Display report +RID_REPORT_35=Create report +RID_REPORT_36=Ascending +RID_REPORT_37=Descending +RID_REPORT_40=~Dynamic report +RID_REPORT_41=~Create report now +RID_REPORT_42=~Modify report layout +RID_REPORT_43=Static report +RID_REPORT_44=Save as +RID_REPORT_50=Groupings +RID_REPORT_51=Then b~y +RID_REPORT_52=~Then by +RID_REPORT_53=Asc~ending +RID_REPORT_54=Ascend~ing +RID_REPORT_55=Ascendin~g +RID_REPORT_56=De~scending +RID_REPORT_57=Des~cending +RID_REPORT_58=De~scending +RID_REPORT_60=Binary fields cannot be displayed in the report. +RID_REPORT_61=The table '' does not exist. +RID_REPORT_62=Creating Report... +RID_REPORT_63=Number of records inserted: +RID_REPORT_64=The form '' does not exist. +RID_REPORT_65=The query with the statement
''
could not be run.
Check your data source. +RID_REPORT_66=The following hidden control in the form '' could not be read: ''. +RID_REPORT_67=Importing data... +RID_REPORT_68=Labeling fields +RID_REPORT_69=How do you want to label the fields? +RID_REPORT_70=Label +RID_REPORT_71=Field +RID_REPORT_72=An error occurred in the wizard.
The template '%PATH' could be erroneous.
Either the required sections or tables do not exist or exist under the wrong name.
See the Help for more detailed information.
Please select another template. +RID_REPORT_73=There is an invalid user field in a table. +RID_REPORT_74=The sort criterion '' was chosen twice. Each criterion can only be chosen once. +RID_REPORT_75=Note: The dummy text will be replaced by data from the database when the report is created. +RID_REPORT_76=A report '%REPORTNAME' already exists in the database. Please assign another name. +RID_REPORT_78=How do you want to proceed after creating the report? +RID_REPORT_79=What kind of report do you want to create? +RID_REPORT_80=Tabular +RID_REPORT_81=Columnar, single-column +RID_REPORT_82=Columnar, two columns +RID_REPORT_83=Columnar, three columns +RID_REPORT_84=In blocks, labels left +RID_REPORT_85=In blocks, labels above +RID_REPORT_86=Title: +RID_REPORT_87=Author: +RID_REPORT_88=Date: +# Please don't translate the words #page# and #count#, these are placeholders. +RID_REPORT_89=Page #page# of #count# +RID_REPORT_90=Page number: +RID_REPORT_91=Page count: +RID_REPORT_92=No valid report template was found. +RID_REPORT_93=Page: +RID_REPORT_94=Align Left - Border +RID_REPORT_95=Align Left - Compact +RID_REPORT_96=Align Left - Elegant +RID_REPORT_97=Align Left - Highlighted +RID_REPORT_98=Align Left - Modern +RID_REPORT_99=Align Left - Red & Blue +RID_REPORT_100=Default +RID_REPORT_101=Outline - Borders +RID_REPORT_102=Outline - Compact +RID_REPORT_103=Outline - Elegant +RID_REPORT_104=Outline - Highlighted +RID_REPORT_105=Outline - Modern +RID_REPORT_106=Outline - Red & Blue +RID_REPORT_107=Outline, indented - Borders +RID_REPORT_108=Outline, indented - Compact +RID_REPORT_109=Outline, indented - Elegant +RID_REPORT_110=Outline, indented - Highlighted +RID_REPORT_111=Outline, indented - Modern +RID_REPORT_112=Outline, indented - Red & Blue +RID_REPORT_113=Bubbles +RID_REPORT_114=Cinema +RID_REPORT_115=Controlling +RID_REPORT_116=Default +RID_REPORT_117=Drafting +RID_REPORT_118=Finances +RID_REPORT_119=Flipchart +RID_REPORT_120=Formal with Company Logo +RID_REPORT_121=Generic +RID_REPORT_122=Worldmap +RID_DB_COMMON_0=C~reate +RID_DB_COMMON_1=~Cancel +RID_DB_COMMON_2=< ~Back +RID_DB_COMMON_3=~Next > +RID_DB_COMMON_4=~Database +RID_DB_COMMON_5=~Table name +RID_DB_COMMON_6=An error occurred while running the wizard. The wizard will be terminated. +RID_DB_COMMON_8=No database has been installed. At least one database is required before the wizard for forms can be started. +RID_DB_COMMON_9=The database does not contain any tables. +RID_DB_COMMON_10=This title already exists in the database. Please enter another name. +RID_DB_COMMON_11=The title must not contain any spaces or special characters. +RID_DB_COMMON_12=The database service (com.sun.data.DatabaseEngine) could not be instantiated. +RID_DB_COMMON_13=The selected table or query could not be opened. +RID_DB_COMMON_14=No connection to the database could be established. +RID_DB_COMMON_20=~Help +RID_DB_COMMON_21=~Stop +RID_DB_COMMON_30=The document could not be saved. +RID_DB_COMMON_33=Exiting the wizard +RID_DB_COMMON_34=Connecting to data source... +RID_DB_COMMON_35=The connection to the data source could not be established. +RID_DB_COMMON_36=The file path entered is not valid. +RID_DB_COMMON_37=Please select a data source +RID_DB_COMMON_38=Please select a table or query +RID_DB_COMMON_39=Add field +RID_DB_COMMON_40=Remove field +RID_DB_COMMON_41=Add all fields +RID_DB_COMMON_42=Remove all fields +RID_DB_COMMON_43=Move field up +RID_DB_COMMON_44=Move field down +RID_DB_COMMON_45=The field names from '%NAME' could not be retrieved. +RID_QUERY_0=Query Wizard +RID_QUERY_1=Query +RID_QUERY_2=Query Wizard +RID_QUERY_3=~Tables +RID_QUERY_4=A~vailable fields +RID_QUERY_5=Name ~of the query +RID_QUERY_6=Display ~Query +RID_QUERY_7=~Modify Query +RID_QUERY_8=~How do you want to proceed after creating the query? +RID_QUERY_9=Match ~all of the following +RID_QUERY_10=~Match any of the following +RID_QUERY_11=~Detailed query (Shows all records of the query.) +RID_QUERY_12=~Summary query (Shows only results of aggregate functions.) +RID_QUERY_16=Aggregate functions +RID_QUERY_17=Fields +RID_QUERY_18=~Group by +RID_QUERY_19=Field +RID_QUERY_20=Alias +RID_QUERY_21=Table: +RID_QUERY_22=Query: +RID_QUERY_24=Condition +RID_QUERY_25=Value +RID_QUERY_26=is equal to +RID_QUERY_27=is not equal to +RID_QUERY_28=is smaller than +RID_QUERY_29=is greater than +RID_QUERY_30=is equal or less than +RID_QUERY_31=is equal or greater than +RID_QUERY_32=like +RID_QUERY_33=not like +RID_QUERY_34=is null +RID_QUERY_35=is not null +RID_QUERY_36=true +RID_QUERY_37=false +RID_QUERY_38=and +RID_QUERY_39=or +RID_QUERY_40=get the sum of +RID_QUERY_41=get the average of +RID_QUERY_42=get the minimum of +RID_QUERY_43=get the maximum of +RID_QUERY_44=get the count of +RID_QUERY_48=(none) +RID_QUERY_50=Fie~lds in the Query: +RID_QUERY_51=Sorting order: +RID_QUERY_52=No sorting fields were assigned. +RID_QUERY_53=Search conditions: +RID_QUERY_54=No conditions were assigned. +RID_QUERY_55=Aggregate functions: +RID_QUERY_56=No aggregate functions were assigned. +RID_QUERY_57=Grouped by: +RID_QUERY_58=No Groups were assigned. +RID_QUERY_59=Grouping conditions: +RID_QUERY_60=No grouping conditions were assigned. +RID_QUERY_70=Select the fields (columns) for your query +RID_QUERY_71=Select the sorting order +RID_QUERY_72=Select the search conditions +RID_QUERY_73=Select the type of query +RID_QUERY_74=Select the groups +RID_QUERY_75=Select the grouping conditions +RID_QUERY_76=Assign aliases if desired +RID_QUERY_77=Check the overview and decide how to proceed +RID_QUERY_80=Field selection +RID_QUERY_81=Sorting order +RID_QUERY_82=Search conditions +RID_QUERY_83=Detail or summary +RID_QUERY_84=Grouping +RID_QUERY_85=Grouping conditions +RID_QUERY_86=Aliases +RID_QUERY_87=Overview +RID_QUERY_88=A field that has not been assigned an aggregate function must be used in a group. +RID_QUERY_89=The condition ' ' was chosen twice. Each condition can only be chosen once +RID_QUERY_90=The aggregate function has been assigned twice to the fieldname ''. +RID_QUERY_91=, +RID_QUERY_92= () +RID_QUERY_93= () +RID_QUERY_94= +RID_QUERY_95= +RID_QUERY_96= +RID_FORM_0=Form Wizard +RID_FORM_1=Fields in ~the form +RID_FORM_2=Binary fields are always listed and selectable from the left list.\nIf possible, they are interpreted as images. +RID_FORM_3=A subform is a form that is inserted in another form.\nUse subforms to show data from tables or queries with a one-to-many relationship. +RID_FORM_4=~Add Subform +RID_FORM_5=~Subform based on existing relation +RID_FORM_6=Tables or queries +RID_FORM_7=Subform based on ~manual selection of fields +RID_FORM_8=~Which relation do you want to add? +RID_FORM_9=Fields in the ~subform +RID_FORM_12=~Available fields +RID_FORM_13=Fields in form +RID_FORM_19=The join '' and '' has been selected twice.\nBut joins may only be used once. +RID_FORM_20=~First joined subform field +RID_FORM_21=~Second joined subform field +RID_FORM_22=~Third joined subform field +RID_FORM_23=~Fourth joined subform field +RID_FORM_24=F~irst joined main form field +RID_FORM_25=S~econd joined main form field +RID_FORM_26=T~hird joined main form field +RID_FORM_27=F~ourth joined main form field +RID_FORM_28=Field border +RID_FORM_29=No border +RID_FORM_30=3D look +RID_FORM_31=Flat +RID_FORM_32=Label placement +RID_FORM_33=Align left +RID_FORM_34=Align right +RID_FORM_35=Arrangement of DB fields +RID_FORM_36=Columnar - Labels Left +RID_FORM_37=Columnar - Labels on Top +RID_FORM_38=In Blocks - Labels Left +RID_FORM_39=In Blocks - Labels Above +RID_FORM_40=As Data Sheet +RID_FORM_41=Arrangement of the main form +RID_FORM_42=Arrangement of the subform +RID_FORM_44=The form is to be ~used for entering new data only. +RID_FORM_45=Existing data will not be displayed +RID_FORM_46=T~he form is to display all data +RID_FORM_47=Do not allow ~modification of existing data +RID_FORM_48=Do not allow ~deletion of existing data +RID_FORM_49=Do not allow ~addition of new data +RID_FORM_50=Name of ~the form +RID_FORM_51=How do you want to proceed after creating the form? +RID_FORM_52=~Work with the form +RID_FORM_53=~Modify the form +RID_FORM_55=~Page Styles +RID_FORM_80=Field selection +RID_FORM_81=Set up a subform +RID_FORM_82=Add subform fields +RID_FORM_83=Get joined fields +RID_FORM_84=Arrange controls +RID_FORM_85=Set data entry +RID_FORM_86=Apply styles +RID_FORM_87=Set name +RID_FORM_88=(Date) +RID_FORM_89=(Time) +RID_FORM_90=Select the fields of your form +RID_FORM_91=Decide if you want to set up a subform +RID_FORM_92=Select the fields of your subform +RID_FORM_93=Select the joins between your forms +RID_FORM_94=Arrange the controls on your form +RID_FORM_95=Select the data entry mode +RID_FORM_96=Apply the style of your form +RID_FORM_97=Set the name of the form +RID_FORM_98=A form with the name '%FORMNAME' already exists.\nChoose another name. +RID_TABLE_1=Table Wizard +RID_TABLE_2=Select fields +RID_TABLE_3=Set types and formats +RID_TABLE_4=Set primary key +RID_TABLE_5=Create table +RID_TABLE_8=Select fields for your table +RID_TABLE_9=Set field types and formats +RID_TABLE_10=Set primary key +RID_TABLE_11=Create table +RID_TABLE_14=This wizard helps you to create a table for your database. After selecting a table category and a sample table, choose the fields you want to include in your table. You can include fields from more than one sample table. +RID_TABLE_15=Ca~tegory +RID_TABLE_16=B~usiness +RID_TABLE_17=P~ersonal +RID_TABLE_18=~Sample tables +RID_TABLE_19=A~vailable fields +RID_TABLE_20=Field information +RID_TABLE_21=+ +RID_TABLE_22=- +RID_TABLE_23=Field name +RID_TABLE_24=Field type +RID_TABLE_25=~Selected fields +RID_TABLE_26=A primary key uniquely identifies each record in a database table. Primary keys ease the linking of information in separate tables, and it is recommended that you have a primary key in every table. Without a primary key, it will not be possible to enter data into this table. +RID_TABLE_27=~Create a primary key +RID_TABLE_28=~Automatically add a primary key +RID_TABLE_29=~Use an existing field as a primary key +RID_TABLE_30=Define p~rimary key as a combination of several fields +RID_TABLE_31=F~ieldname +RID_TABLE_32=~Primary key fields +RID_TABLE_33=Auto ~value +RID_TABLE_34=What do you want to name your table? +RID_TABLE_35=Congratulations. You have entered all the information needed to create your table. +RID_TABLE_36=What do you want to do next? +RID_TABLE_37=Modify the table design +RID_TABLE_38=Insert data immediately +RID_TABLE_39=C~reate a form based on this table +RID_TABLE_40=The table you have created could not be opened. +RID_TABLE_41=The table name '%TABLENAME' contains a character ('%SPECIALCHAR') that might not be supported by the database. +RID_TABLE_42=The field name '%FIELDNAME' contains a special character ('%SPECIALCHAR') that might not be supported by the database. +RID_TABLE_43=Field +RID_TABLE_44=MyTable +RID_TABLE_45=Add a Field +RID_TABLE_46=Remove the selected Field +RID_TABLE_47=The field cannot be inserted because this would exceed the maximum number of %COUNT possible fields in the database table +RID_TABLE_48=The name '%TABLENAME' already exists.\nPlease enter another name. +RID_TABLE_49=Catalog of the table +RID_TABLE_50=Schema of the table +RID_TABLE_51=The field '%FIELDNAME' already exists. +STEP_ZERO_0=~Cancel +STEP_ZERO_1=~Help +STEP_ZERO_2=< ~Back +STEP_ZERO_3=~Convert +STEP_ZERO_4=Note: Currency amounts from external links and currency conversion factors in formulas cannot be converted. +STEP_ZERO_5=First, unprotect all sheets. +STEP_ZERO_6=Currencies: +STEP_ZERO_7=C~ontinue > +STEP_ZERO_8=C~lose +STEP_CONVERTER_0=~Entire document +STEP_CONVERTER_1=Selection +STEP_CONVERTER_2=Cell S~tyles +STEP_CONVERTER_3=Currency cells in the current ~sheet +STEP_CONVERTER_4=Currency cells in the entire ~document +STEP_CONVERTER_5=~Selected range +STEP_CONVERTER_6=Select Cell Styles +STEP_CONVERTER_7=Select currency cells +STEP_CONVERTER_8=Currency ranges: +STEP_CONVERTER_9=Templates: +STEP_AUTOPILOT_0=Extent +STEP_AUTOPILOT_1=~Single %PRODUCTNAME Calc document +STEP_AUTOPILOT_2=Complete ~directory +STEP_AUTOPILOT_3=Source Document: +STEP_AUTOPILOT_4=Source directory: +STEP_AUTOPILOT_5=~Including subfolders +STEP_AUTOPILOT_6=Target directory: +STEP_AUTOPILOT_7=Temporarily unprotect sheet without query +STEP_AUTOPILOT_10=Also convert fields and tables in text documents +STATUSLINE_0=Conversion status: +STATUSLINE_1=Conversion status of the cell templates: +STATUSLINE_2=Registration of the relevant ranges: Sheet %1Number%1 of %2TotPageCount%2 +STATUSLINE_3=Entry of the ranges to be converted... +STATUSLINE_4=Sheet protection for each sheet will be restored... +STATUSLINE_5=Conversion of the currency units in the cell templates... +MESSAGES_0=~Finish +MESSAGES_1=Select directory +MESSAGES_2=Select file +MESSAGES_3=Select target directory +MESSAGES_4=non-existent +MESSAGES_5=Euro Converter +MESSAGES_6=Should protected spreadsheets be temporarily unprotected? +MESSAGES_7=Enter the password to unprotect the table %1TableName%1 +MESSAGES_8=Wrong Password! +MESSAGES_9=Protected Sheet +MESSAGES_10=Warning! +MESSAGES_11=Protection for the sheets will not be removed. +MESSAGES_12=Sheet cannot be unprotected +MESSAGES_13=The Wizard cannot edit this document as cell formats cannot be modified in documents containing protected spreadsheets. +MESSAGES_14=Please note that the Euro Converter will, otherwise, not be able to edit this document! +MESSAGES_15=Please choose a currency to be converted first! +MESSAGES_16=Password: +MESSAGES_17=OK +MESSAGES_18=Cancel +MESSAGES_19=Please select a %PRODUCTNAME Calc document for editing! +MESSAGES_20='<1>' is not a directory! +MESSAGES_21=Document is read-only! +MESSAGES_22=The '<1>' file already exists.Do you want to overwrite it? +MESSAGES_23=Do you really want to terminate conversion at this point? +MESSAGES_24=Cancel Wizard +CURRENCIES_0=Portuguese Escudo +CURRENCIES_1=Dutch Guilder +CURRENCIES_2=French Franc +CURRENCIES_3=Spanish Peseta +CURRENCIES_4=Italian Lira +CURRENCIES_5=German Mark +CURRENCIES_6=Belgian Franc +CURRENCIES_7=Irish Punt +CURRENCIES_8=Luxembourg Franc +CURRENCIES_9=Austrian Schilling +CURRENCIES_10=Finnish Mark +CURRENCIES_11=Greek Drachma +CURRENCIES_12=Slovenian Tolar +CURRENCIES_13=Cypriot Pound +CURRENCIES_14=Maltese Lira +CURRENCIES_15=Slovak Koruna +CURRENCIES_16=Estonian Kroon +CURRENCIES_17=Latvian Lats +CURRENCIES_18=Lithuanian Litas +STEP_LASTPAGE_0=Progress +STEP_LASTPAGE_1=Retrieving the relevant documents... +STEP_LASTPAGE_2=Converting the documents... +STEP_LASTPAGE_3=Settings: +STEP_LASTPAGE_4=Sheet is always unprotected +STYLES_0=Theme Selection +STYLES_1=Error while saving the document to the clipboard! The following action cannot be undone. +STYLES_2=~Cancel +STYLES_3=~OK +STYLENAME_0=(Standard) +STYLENAME_1=Autumn Leaves +STYLENAME_2=Be +STYLENAME_3=Black and White +STYLENAME_4=Blackberry Bush +STYLENAME_5=Blue Jeans +STYLENAME_6=Fifties Diner +STYLENAME_7=Glacier +STYLENAME_8=Green Grapes +STYLENAME_9=Marine +STYLENAME_10=Millennium +STYLENAME_11=Nature +STYLENAME_12=Neon +STYLENAME_13=Night +STYLENAME_14=PC Nostalgia +STYLENAME_15=Pastel +STYLENAME_16=Pool Party +STYLENAME_17=Pumpkin +CorrespondenceDialog_0=Addressee +CorrespondenceDialog_1=One recipient +CorrespondenceDialog_2=Several recipients (address database) +CorrespondenceDialog_3=Use of This Template +CorrespondenceMsgError=An error has occurred. +CorrespondenceFields_0=Click placeholder and overwrite +CorrespondenceFields_1=Company +CorrespondenceFields_2=Department +CorrespondenceFields_3=First Name +CorrespondenceFields_4=Last Name +CorrespondenceFields_5=Street +CorrespondenceFields_6=Country +CorrespondenceFields_7=ZIP/Postal Code +CorrespondenceFields_8=City +CorrespondenceFields_9=Title +CorrespondenceFields_10=Position +CorrespondenceFields_11=Form of Address +CorrespondenceFields_12=Initials +CorrespondenceFields_13=Salutation +CorrespondenceFields_14=Home Phone +CorrespondenceFields_15=Work Phone +CorrespondenceFields_16=Fax +CorrespondenceFields_17=E-Mail +CorrespondenceFields_18=URL +CorrespondenceFields_19=Notes +CorrespondenceFields_20=Alt. Field 1 +CorrespondenceFields_21=Alt. Field 2 +CorrespondenceFields_22=Alt. Field 3 +CorrespondenceFields_23=Alt. Field 4 +CorrespondenceFields_24=ID +CorrespondenceFields_25=State +CorrespondenceFields_26=Office Phone +CorrespondenceFields_27=Pager +CorrespondenceFields_28=Mobile Phone +CorrespondenceFields_29=Other Phone +CorrespondenceFields_30=Calendar URL +CorrespondenceFields_31=Invite +CorrespondenceNoTextmark_0=The bookmark 'Recipient' is missing. +CorrespondenceNoTextmark_1=Form letter fields can not be included. +AgendaDlgName=Minutes Template +AgendaDlgNoCancel=An option must be confirmed. +AgendaDlgFrame=Minutes Type +AgendaDlgButton1=Results Minutes +AgendaDlgButton2=Evaluation Minutes +TextField=User data field is not defined! +NoDirCreation=The '%1' directory cannot be created: +MsgDirNotThere=The '%1' directory does not exist. +QueryfornewCreation=Do you want to create it now? +HelpButton=~Help +CancelButton=~Cancel +BackButton=< ~Back +NextButton=Ne~xt > +BeginButton=~Convert +CloseButton=~Close +WelcometextLabel1=This wizard convert legacy format documents to Open Document Format for Office Applications. +WelcometextLabel3=Select the document type for conversion: +MSTemplateCheckbox_1_=Word templates +MSTemplateCheckbox_2_=Excel templates +MSTemplateCheckbox_3_=PowerPoint templates +MSDocumentCheckbox_1_=Word documents +MSDocumentCheckbox_2_=Excel documents +MSDocumentCheckbox_3_=PowerPoint/Publisher documents +MSContainerName=Microsoft Office +SummaryHeader=Summary: +GroupnameDefault=Imported_Templates +ProgressMoreDocs=Documents +ProgressMoreTemplates=Templates +FileExists=The '<1>' file already exists.Do you want to overwrite it? +MorePathsError3=Directories do not exist +ConvertError1=Do you really want to terminate conversion at this point? +ConvertError2=Cancel Wizard +RTErrorDesc=An error has occurred in the wizard. +RTErrorHeader=Error +OverwriteallFiles=Do you want to overwrite documents without being asked? +ReeditMacro=Document macro has to be revised. +CouldNotsaveDocument=Document '<1>' could not be saved. +CouldNotopenDocument=Document '<1>' could not be opened. +PathDialogMessage=Select a directory +DialogTitle=Document Converter +SearchInSubDir=Including subdirectories +ProgressPage1=Progress +ProgressPage2=Retrieving the relevant documents: +ProgressPage3=Converting the documents +ProgressFound=Found: +ProgressPage5="%1 found +Ready=Finished +SourceDocuments=Source documents +TargetDocuments=Target documents +LogfileSummary= documents converted +SumInclusiveSubDir=All subdirectories will be taken into account +SumSaveDokumente=These will be exported to the following directory: +TextImportLabel=Import from: +TextExportLabel=Save to: +CreateLogfile=Create log file +LogfileHelpText=A log file will be created in your work directory +ShowLogfile=Show log file +SumMSTextDocuments=All Word documents contained in the following directory will be imported: +SumMSTableDocuments=All Excel documents contained in the following directory will be imported: +SumMSDrawDocuments=All PowerPoint/Publisher documents contained in the following directory will be imported: +SumMSTextTemplates=All Word templates contained in the following directory will be imported: +SumMSTableTemplates=All Excel templates contained in the following directory will be imported: +SumMSDrawTemplates=All PowerPoint templates contained in the following directory will be imported: -- cgit v1.2.3