/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <drawinglayer/processor3d/cutfindprocessor3d.hxx>
#include <drawinglayer/primitive3d/drawinglayer_primitivetypes3d.hxx>
#include <drawinglayer/primitive3d/transformprimitive3d.hxx>
#include <primitive3d/hatchtextureprimitive3d.hxx>
#include <drawinglayer/primitive3d/polypolygonprimitive3d.hxx>
#include <basegfx/polygon/b3dpolygon.hxx>
#include <basegfx/polygon/b3dpolygontools.hxx>
#include <basegfx/polygon/b3dpolypolygontools.hxx>
#include <primitive3d/hiddengeometryprimitive3d.hxx>


namespace drawinglayer::processor3d
{
        CutFindProcessor::CutFindProcessor(const geometry::ViewInformation3D& rViewInformation,
            const basegfx::B3DPoint& rFront,
            const basegfx::B3DPoint& rBack,
            bool bAnyHit)
        :   BaseProcessor3D(rViewInformation),
            maFront(rFront),
            maBack(rBack),
            maResult(),
            maCombinedTransform(),
            mbAnyHit(bAnyHit)
        {
        }

        void CutFindProcessor::processBasePrimitive3D(const primitive3d::BasePrimitive3D& rCandidate)
        {
            if(mbAnyHit && !maResult.empty())
            {
                // stop processing as soon as a hit was recognized
                return;
            }

            // it is a BasePrimitive3D implementation, use getPrimitive3DID() call for switch
            switch(rCandidate.getPrimitive3DID())
            {
                case PRIMITIVE3D_ID_TRANSFORMPRIMITIVE3D :
                {
                    // transform group.
                    const primitive3d::TransformPrimitive3D& rPrimitive = static_cast< const primitive3d::TransformPrimitive3D& >(rCandidate);

                    // remember old and transform front, back to object coordinates
                    const basegfx::B3DPoint aLastFront(maFront);
                    const basegfx::B3DPoint aLastBack(maBack);
                    basegfx::B3DHomMatrix aInverseTrans(rPrimitive.getTransformation());
                    aInverseTrans.invert();
                    maFront *= aInverseTrans;
                    maBack *= aInverseTrans;

                    // remember current and create new transformation; add new object transform from right side
                    const geometry::ViewInformation3D aLastViewInformation3D(getViewInformation3D());
                    const geometry::ViewInformation3D aNewViewInformation3D(
                        aLastViewInformation3D.getObjectTransformation() * rPrimitive.getTransformation(),
                        aLastViewInformation3D.getOrientation(),
                        aLastViewInformation3D.getProjection(),
                        aLastViewInformation3D.getDeviceToView(),
                        aLastViewInformation3D.getViewTime(),
                        aLastViewInformation3D.getExtendedInformationSequence());
                    updateViewInformation(aNewViewInformation3D);

                    // #i102956# remember needed back-transform for found cuts (combine from right side)
                    const basegfx::B3DHomMatrix aLastCombinedTransform(maCombinedTransform);
                    maCombinedTransform = maCombinedTransform * rPrimitive.getTransformation();

                    // let break down
                    process(rPrimitive.getChildren());

                    // restore transformations and front, back
                    maCombinedTransform = aLastCombinedTransform;
                    updateViewInformation(aLastViewInformation3D);
                    maFront = aLastFront;
                    maBack = aLastBack;
                    break;
                }
                case PRIMITIVE3D_ID_POLYGONHAIRLINEPRIMITIVE3D :
                {
                    // PolygonHairlinePrimitive3D, not used for hit test with planes, ignore. This
                    // means that also thick line expansion will not be hit-tested as
                    // PolyPolygonMaterialPrimitive3D
                    break;
                }
                case PRIMITIVE3D_ID_HATCHTEXTUREPRIMITIVE3D :
                {
                    // #i97321#
                    // For HatchTexturePrimitive3D, do not use the decomposition since it will produce
                    // clipped hatch lines in 3D. It can be used when the hatch also has a filling, but for
                    // simplicity, just use the children which are the PolyPolygonMaterialPrimitive3D
                    // which define the hatched areas anyways; for HitTest this is more than adequate
                    const primitive3d::HatchTexturePrimitive3D& rPrimitive = static_cast< const primitive3d::HatchTexturePrimitive3D& >(rCandidate);
                    process(rPrimitive.getChildren());
                    break;
                }
                case PRIMITIVE3D_ID_HIDDENGEOMETRYPRIMITIVE3D :
                {
                    // HiddenGeometryPrimitive3D; the default decomposition would return an empty sequence,
                    // so force this primitive to process its children directly if the switch is set
                    // (which is the default). Else, ignore invisible content
                    const primitive3d::HiddenGeometryPrimitive3D& rHiddenGeometry(static_cast< const primitive3d::HiddenGeometryPrimitive3D& >(rCandidate));
                    const primitive3d::Primitive3DContainer& rChildren = rHiddenGeometry.getChildren();

                    if(!rChildren.empty())
                    {
                            process(rChildren);
                    }

                    break;
                }
                case PRIMITIVE3D_ID_UNIFIEDTRANSPARENCETEXTUREPRIMITIVE3D :
                {
                    const primitive3d::UnifiedTransparenceTexturePrimitive3D& rPrimitive = static_cast< const primitive3d::UnifiedTransparenceTexturePrimitive3D& >(rCandidate);
                    const primitive3d::Primitive3DContainer& rChildren = rPrimitive.getChildren();

                    if(!rChildren.empty())
                    {
                        process(rChildren);
                    }

                    break;
                }
                case PRIMITIVE3D_ID_POLYPOLYGONMATERIALPRIMITIVE3D :
                {
                    // PolyPolygonMaterialPrimitive3D
                    const primitive3d::PolyPolygonMaterialPrimitive3D& rPrimitive = static_cast< const primitive3d::PolyPolygonMaterialPrimitive3D& >(rCandidate);

                    if(!maFront.equal(maBack))
                    {
                        const basegfx::B3DPolyPolygon& rPolyPolygon = rPrimitive.getB3DPolyPolygon();
                        const sal_uInt32 nPolyCount(rPolyPolygon.count());

                        if(nPolyCount)
                        {
                            const basegfx::B3DPolygon& aPolygon(rPolyPolygon.getB3DPolygon(0));
                            const sal_uInt32 nPointCount(aPolygon.count());

                            if(nPointCount > 2)
                            {
                                const basegfx::B3DVector aPlaneNormal(aPolygon.getNormal());

                                if(!aPlaneNormal.equalZero())
                                {
                                    const basegfx::B3DPoint aPointOnPlane(aPolygon.getB3DPoint(0));
                                    double fCut(0.0);

                                    if(basegfx::utils::getCutBetweenLineAndPlane(aPlaneNormal, aPointOnPlane, maFront, maBack, fCut))
                                    {
                                        const basegfx::B3DPoint aCutPoint(basegfx::interpolate(maFront, maBack, fCut));

                                        if(basegfx::utils::isInside(rPolyPolygon, aCutPoint))
                                        {
                                            // #i102956# add result. Do not forget to do this in the coordinate
                                            // system the processor get started with, so use the collected
                                            // combined transformation from processed TransformPrimitive3D's
                                            maResult.push_back(maCombinedTransform * aCutPoint);
                                        }
                                    }
                                }
                            }
                        }
                    }

                    break;
                }
                default :
                {
                    // process recursively
                    process(rCandidate.get3DDecomposition(getViewInformation3D()));
                    break;
                }
            }
        }

} // end of namespace

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */