/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include namespace sd { FuConstructRectangle::FuConstructRectangle ( ViewShell* pViewSh, ::sd::Window* pWin, ::sd::View* pView, SdDrawDocument* pDoc, SfxRequest& rReq) : FuConstruct(pViewSh, pWin, pView, pDoc, rReq) , mnFillTransparence(0) , mnLineStyle(SAL_MAX_UINT16) { } namespace{ /// Checks to see if the request has a parameter of IsSticky:bool=true /// It means that the selected command/button will stay selected after use bool isSticky(const SfxRequest& rReq) { const SfxItemSet *pArgs = rReq.GetArgs (); if (pArgs) { const SfxBoolItem* pIsSticky = rReq.GetArg(FN_PARAM_4); if (pIsSticky && pIsSticky->GetValue()) return true; } return false; } } rtl::Reference FuConstructRectangle::Create( ViewShell* pViewSh, ::sd::Window* pWin, ::sd::View* pView, SdDrawDocument* pDoc, SfxRequest& rReq, bool bPermanent ) { FuConstructRectangle* pFunc; rtl::Reference xFunc( pFunc = new FuConstructRectangle( pViewSh, pWin, pView, pDoc, rReq ) ); xFunc->DoExecute(rReq); pFunc->SetPermanent(bPermanent || isSticky(rReq)); return xFunc; } void FuConstructRectangle::DoExecute( SfxRequest& rReq ) { FuConstruct::DoExecute( rReq ); mpViewShell->GetViewShellBase().GetToolBarManager()->SetToolBar( ToolBarManager::ToolBarGroup::Function, ToolBarManager::msDrawingObjectToolBar); const SfxItemSet *pArgs = rReq.GetArgs (); if (pArgs) { switch (nSlotId) { case SID_DRAW_ELLIPSE : { const SfxUInt32Item* pCenterX = rReq.GetArg(ID_VAL_CENTER_X); const SfxUInt32Item* pCenterY = rReq.GetArg(ID_VAL_CENTER_Y); const SfxUInt32Item* pAxisX = rReq.GetArg(ID_VAL_AXIS_X); const SfxUInt32Item* pAxisY = rReq.GetArg(ID_VAL_AXIS_Y); if (!pCenterX || !pCenterY || !pAxisX || !pAxisY) break; ::tools::Rectangle aNewRectangle (pCenterX->GetValue () - pAxisX->GetValue () / 2, pCenterY->GetValue () - pAxisY->GetValue () / 2, pCenterX->GetValue () + pAxisX->GetValue () / 2, pCenterY->GetValue () + pAxisY->GetValue () / 2); SdrCircObj *pNewCircle = new SdrCircObj( mpView->getSdrModelFromSdrView(), SdrCircKind::Full, aNewRectangle); SdrPageView *pPV = mpView->GetSdrPageView(); mpView->InsertObjectAtView(pNewCircle, *pPV, SdrInsertFlags::SETDEFLAYER | SdrInsertFlags::SETDEFATTR); } break; case SID_DRAW_RECT : { const SfxUInt32Item* pMouseStartX = rReq.GetArg(ID_VAL_MOUSESTART_X); const SfxUInt32Item* pMouseStartY = rReq.GetArg(ID_VAL_MOUSESTART_Y); const SfxUInt32Item* pMouseEndX = rReq.GetArg(ID_VAL_MOUSEEND_X); const SfxUInt32Item* pMouseEndY = rReq.GetArg(ID_VAL_MOUSEEND_Y); const SfxUInt16Item* pFillTransparence = rReq.GetArg(FN_PARAM_1); const SfxStringItem* pFillColor = rReq.GetArg(FN_PARAM_2); const SfxUInt16Item* pLineStyle = rReq.GetArg(FN_PARAM_3); const SfxStringItem* pShapeName = rReq.GetArg(SID_SHAPE_NAME); if (pFillTransparence && pFillTransparence->GetValue() > 0) { mnFillTransparence = pFillTransparence->GetValue(); } if (pFillColor && !pFillColor->GetValue().isEmpty()) { msFillColor = pFillColor->GetValue(); } if (pLineStyle) { mnLineStyle = pLineStyle->GetValue(); } if (pShapeName && !pShapeName->GetValue().isEmpty()) { msShapeName = pShapeName->GetValue(); } if (!pMouseStartX || !pMouseStartY || !pMouseEndX || !pMouseEndY) break; ::tools::Rectangle aNewRectangle (pMouseStartX->GetValue (), pMouseStartY->GetValue (), pMouseEndX->GetValue (), pMouseEndY->GetValue ()); SdrRectObj *pNewRect = new SdrRectObj( mpView->getSdrModelFromSdrView(), aNewRectangle); SdrPageView *pPV = mpView->GetSdrPageView(); mpView->InsertObjectAtView(pNewRect, *pPV, SdrInsertFlags::SETDEFLAYER | SdrInsertFlags::SETDEFATTR); } break; } } if (nSlotId == SID_TOOL_CONNECTOR || nSlotId == SID_CONNECTOR_ARROW_START || nSlotId == SID_CONNECTOR_ARROW_END || nSlotId == SID_CONNECTOR_ARROWS || nSlotId == SID_CONNECTOR_CIRCLE_START || nSlotId == SID_CONNECTOR_CIRCLE_END || nSlotId == SID_CONNECTOR_CIRCLES || nSlotId == SID_CONNECTOR_LINE || nSlotId == SID_CONNECTOR_LINE_ARROW_START || nSlotId == SID_CONNECTOR_LINE_ARROW_END || nSlotId == SID_CONNECTOR_LINE_ARROWS || nSlotId == SID_CONNECTOR_LINE_CIRCLE_START || nSlotId == SID_CONNECTOR_LINE_CIRCLE_END || nSlotId == SID_CONNECTOR_LINE_CIRCLES || nSlotId == SID_CONNECTOR_CURVE || nSlotId == SID_CONNECTOR_CURVE_ARROW_START || nSlotId == SID_CONNECTOR_CURVE_ARROW_END || nSlotId == SID_CONNECTOR_CURVE_ARROWS || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END || nSlotId == SID_CONNECTOR_CURVE_CIRCLES || nSlotId == SID_CONNECTOR_LINES || nSlotId == SID_CONNECTOR_LINES_ARROW_START || nSlotId == SID_CONNECTOR_LINES_ARROW_END || nSlotId == SID_CONNECTOR_LINES_ARROWS || nSlotId == SID_CONNECTOR_LINES_CIRCLE_START || nSlotId == SID_CONNECTOR_LINES_CIRCLE_END || nSlotId == SID_CONNECTOR_LINES_CIRCLES || nSlotId == SID_LINE_ARROW_START || nSlotId == SID_LINE_ARROW_END || nSlotId == SID_LINE_ARROWS || nSlotId == SID_LINE_ARROW_CIRCLE || nSlotId == SID_LINE_CIRCLE_ARROW || nSlotId == SID_LINE_ARROW_SQUARE || nSlotId == SID_LINE_SQUARE_ARROW ) { mpView->UnmarkAll(); } } bool FuConstructRectangle::MouseButtonDown(const MouseEvent& rMEvt) { bool bReturn = FuConstruct::MouseButtonDown(rMEvt); if ( rMEvt.IsLeft() && !mpView->IsAction() ) { Point aPnt( mpWindow->PixelToLogic( rMEvt.GetPosPixel() ) ); mpWindow->CaptureMouse(); sal_uInt16 nDrgLog = sal_uInt16 ( mpWindow->PixelToLogic(Size(DRGPIX,0)).Width() ); if (mpView->GetCurrentObjIdentifier() == OBJ_CAPTION) { Size aCaptionSize(846, 846); // (4x2)cm bReturn = mpView->BegCreateCaptionObj(aPnt, aCaptionSize, nullptr, nDrgLog); } else { mpView->BegCreateObj(aPnt, nullptr, nDrgLog); } SdrObject* pObj = mpView->GetCreateObj(); if (pObj) { SfxItemSet aAttr(mpDoc->GetPool()); SetStyleSheet(aAttr, pObj); SetAttributes(aAttr, pObj); SetLineEnds(aAttr, *pObj); pObj->SetMergedItemSet(aAttr); if( nSlotId == SID_DRAW_CAPTION_VERTICAL ) static_cast(pObj)->SetVerticalWriting( true ); } } return bReturn; } bool FuConstructRectangle::MouseButtonUp(const MouseEvent& rMEvt) { bool bReturn(false); if(mpView->IsCreateObj() && rMEvt.IsLeft()) { SdrObject* pObj = mpView->GetCreateObj(); if(pObj && mpView->EndCreateObj(SdrCreateCmd::ForceEnd)) { if(SID_DRAW_MEASURELINE == nSlotId) { SdrLayerAdmin& rAdmin = mpDoc->GetLayerAdmin(); pObj->SetLayer(rAdmin.GetLayerID(sUNO_LayerName_measurelines)); } // init text position when vertical caption object is created if( dynamic_cast< const SdrCaptionObj *>( pObj ) != nullptr && SID_DRAW_CAPTION_VERTICAL == nSlotId) { // draw text object, needs to be initialized when vertical text is used SfxItemSet aSet(pObj->GetMergedItemSet()); aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); // Correct the value of SDRATTR_TEXTDIRECTION to avoid SetItemSet // calling SetVerticalWriting() again since this item may not yet // be set at the object and thus may differ from vertical state of // the object. aSet.Put(SvxWritingModeItem(css::text::WritingMode_TB_RL, SDRATTR_TEXTDIRECTION)); pObj->SetMergedItemSet(aSet); } bReturn = true; } } bReturn = FuConstruct::MouseButtonUp (rMEvt) || bReturn; if (!bPermanent) mpViewShell->GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); return bReturn; } void FuConstructRectangle::Activate() { SdrObjKind aObjKind; switch (nSlotId) { case SID_LINE_ARROW_START: case SID_LINE_ARROW_END: case SID_LINE_ARROWS: case SID_LINE_ARROW_CIRCLE: case SID_LINE_CIRCLE_ARROW: case SID_LINE_ARROW_SQUARE: case SID_LINE_SQUARE_ARROW: mpView->SetGlueVisible(); [[fallthrough]]; case SID_DRAW_LINE : case SID_DRAW_XLINE: aObjKind = OBJ_LINE; break; case SID_DRAW_MEASURELINE: { aObjKind = OBJ_MEASURE; } break; case SID_DRAW_RECT : case SID_DRAW_RECT_NOFILL : case SID_DRAW_RECT_ROUND : case SID_DRAW_RECT_ROUND_NOFILL: case SID_DRAW_SQUARE : case SID_DRAW_SQUARE_NOFILL : case SID_DRAW_SQUARE_ROUND : case SID_DRAW_SQUARE_ROUND_NOFILL: { aObjKind = OBJ_RECT; } break; case SID_DRAW_ELLIPSE : case SID_DRAW_ELLIPSE_NOFILL: case SID_DRAW_CIRCLE : case SID_DRAW_CIRCLE_NOFILL : { aObjKind = OBJ_CIRC; } break; case SID_DRAW_CAPTION: case SID_DRAW_CAPTION_VERTICAL: { aObjKind = OBJ_CAPTION; } break; case SID_TOOL_CONNECTOR: case SID_CONNECTOR_ARROW_START: case SID_CONNECTOR_ARROW_END: case SID_CONNECTOR_ARROWS: case SID_CONNECTOR_CIRCLE_START: case SID_CONNECTOR_CIRCLE_END: case SID_CONNECTOR_CIRCLES: case SID_CONNECTOR_LINE: case SID_CONNECTOR_LINE_ARROW_START: case SID_CONNECTOR_LINE_ARROW_END: case SID_CONNECTOR_LINE_ARROWS: case SID_CONNECTOR_LINE_CIRCLE_START: case SID_CONNECTOR_LINE_CIRCLE_END: case SID_CONNECTOR_LINE_CIRCLES: case SID_CONNECTOR_CURVE: case SID_CONNECTOR_CURVE_ARROW_START: case SID_CONNECTOR_CURVE_ARROW_END: case SID_CONNECTOR_CURVE_ARROWS: case SID_CONNECTOR_CURVE_CIRCLE_START: case SID_CONNECTOR_CURVE_CIRCLE_END: case SID_CONNECTOR_CURVE_CIRCLES: case SID_CONNECTOR_LINES: case SID_CONNECTOR_LINES_ARROW_START: case SID_CONNECTOR_LINES_ARROW_END: case SID_CONNECTOR_LINES_ARROWS: case SID_CONNECTOR_LINES_CIRCLE_START: case SID_CONNECTOR_LINES_CIRCLE_END: case SID_CONNECTOR_LINES_CIRCLES: { aObjKind = OBJ_EDGE; mpView->SetGlueVisible(); } break; default: { aObjKind = OBJ_RECT; } break; } mpView->SetCurrentObj(static_cast(aObjKind)); FuConstruct::Activate(); } void FuConstructRectangle::Deactivate() { if( nSlotId == SID_TOOL_CONNECTOR || nSlotId == SID_CONNECTOR_ARROW_START || nSlotId == SID_CONNECTOR_ARROW_END || nSlotId == SID_CONNECTOR_ARROWS || nSlotId == SID_CONNECTOR_CIRCLE_START || nSlotId == SID_CONNECTOR_CIRCLE_END || nSlotId == SID_CONNECTOR_CIRCLES || nSlotId == SID_CONNECTOR_LINE || nSlotId == SID_CONNECTOR_LINE_ARROW_START || nSlotId == SID_CONNECTOR_LINE_ARROW_END || nSlotId == SID_CONNECTOR_LINE_ARROWS || nSlotId == SID_CONNECTOR_LINE_CIRCLE_START || nSlotId == SID_CONNECTOR_LINE_CIRCLE_END || nSlotId == SID_CONNECTOR_LINE_CIRCLES || nSlotId == SID_CONNECTOR_CURVE || nSlotId == SID_CONNECTOR_CURVE_ARROW_START || nSlotId == SID_CONNECTOR_CURVE_ARROW_END || nSlotId == SID_CONNECTOR_CURVE_ARROWS || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END || nSlotId == SID_CONNECTOR_CURVE_CIRCLES || nSlotId == SID_CONNECTOR_LINES || nSlotId == SID_CONNECTOR_LINES_ARROW_START || nSlotId == SID_CONNECTOR_LINES_ARROW_END || nSlotId == SID_CONNECTOR_LINES_ARROWS || nSlotId == SID_CONNECTOR_LINES_CIRCLE_START || nSlotId == SID_CONNECTOR_LINES_CIRCLE_END || nSlotId == SID_CONNECTOR_LINES_CIRCLES || nSlotId == SID_LINE_ARROW_START || nSlotId == SID_LINE_ARROW_END || nSlotId == SID_LINE_ARROWS || nSlotId == SID_LINE_ARROW_CIRCLE || nSlotId == SID_LINE_CIRCLE_ARROW || nSlotId == SID_LINE_ARROW_SQUARE || nSlotId == SID_LINE_SQUARE_ARROW ) { mpView->SetGlueVisible( false ); } FuConstruct::Deactivate(); } namespace { /// Returns the color based on the color names listed in core/include/tools/color.hxx /// Feel free to extend with more color names from color.hxx Color strToColor(const OUString& sColor) { Color aColor = COL_AUTO; if (sColor == "COL_GRAY") aColor = COL_GRAY; else if (sColor == "COL_GRAY3") aColor = COL_GRAY3; else if (sColor == "COL_GRAY7") aColor = COL_GRAY7; return aColor; } } /** * set attribute for the object to be created */ void FuConstructRectangle::SetAttributes(SfxItemSet& rAttr, SdrObject* pObj) { if (nSlotId == SID_DRAW_RECT_ROUND || nSlotId == SID_DRAW_RECT_ROUND_NOFILL || nSlotId == SID_DRAW_SQUARE_ROUND || nSlotId == SID_DRAW_SQUARE_ROUND_NOFILL) { // round corner rAttr.Put(makeSdrEckenradiusItem(500)); } else if (nSlotId == SID_CONNECTOR_LINE || nSlotId == SID_CONNECTOR_LINE_ARROW_START || nSlotId == SID_CONNECTOR_LINE_ARROW_END || nSlotId == SID_CONNECTOR_LINE_ARROWS || nSlotId == SID_CONNECTOR_LINE_CIRCLE_START || nSlotId == SID_CONNECTOR_LINE_CIRCLE_END || nSlotId == SID_CONNECTOR_LINE_CIRCLES) { // direct connector rAttr.Put(SdrEdgeKindItem(SdrEdgeKind::OneLine)); } else if (nSlotId == SID_CONNECTOR_LINES || nSlotId == SID_CONNECTOR_LINES_ARROW_START || nSlotId == SID_CONNECTOR_LINES_ARROW_END || nSlotId == SID_CONNECTOR_LINES_ARROWS || nSlotId == SID_CONNECTOR_LINES_CIRCLE_START || nSlotId == SID_CONNECTOR_LINES_CIRCLE_END || nSlotId == SID_CONNECTOR_LINES_CIRCLES) { // line connector rAttr.Put(SdrEdgeKindItem(SdrEdgeKind::ThreeLines)); } else if (nSlotId == SID_CONNECTOR_CURVE || nSlotId == SID_CONNECTOR_CURVE_ARROW_START || nSlotId == SID_CONNECTOR_CURVE_ARROW_END || nSlotId == SID_CONNECTOR_CURVE_ARROWS || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END || nSlotId == SID_CONNECTOR_CURVE_CIRCLES) { // curve connector rAttr.Put(SdrEdgeKindItem(SdrEdgeKind::Bezier)); } else if ( nSlotId == SID_DRAW_CAPTION || nSlotId == SID_DRAW_CAPTION_VERTICAL ) { // legend object Size aSize(pObj->GetLogicRect().GetSize()); rAttr.Put( makeSdrTextMinFrameHeightItem( aSize.Height() ) ); rAttr.Put( makeSdrTextMinFrameWidthItem( aSize.Width() ) ); rAttr.Put( makeSdrTextAutoGrowHeightItem( true ) ); rAttr.Put( makeSdrTextAutoGrowWidthItem( true ) ); // Support full with for vertical caption objects, too if(SID_DRAW_CAPTION == nSlotId) rAttr.Put( SdrTextHorzAdjustItem( SDRTEXTHORZADJUST_BLOCK ) ); else rAttr.Put( SdrTextVertAdjustItem( SDRTEXTVERTADJUST_BLOCK ) ); rAttr.Put( SvxAdjustItem( SvxAdjust::Center, EE_PARA_JUST ) ); rAttr.Put( makeSdrTextLeftDistItem( 100 ) ); rAttr.Put( makeSdrTextRightDistItem( 100 ) ); rAttr.Put( makeSdrTextUpperDistItem( 100 ) ); rAttr.Put( makeSdrTextLowerDistItem( 100 ) ); } else if (nSlotId == SID_DRAW_MEASURELINE) { // dimension line SdPage* pPage = static_cast( mpView->GetSdrPageView()->GetPage() ); OUString aName(SdResId(STR_POOLSHEET_MEASURE)); SfxStyleSheet* pSheet( static_cast< SfxStyleSheet* >( pPage->getSdrModelFromSdrPage().GetStyleSheetPool()->Find(aName, SfxStyleFamily::Para))); DBG_ASSERT(pSheet, "StyleSheet missing"); if (pSheet) { pObj->SetStyleSheet(pSheet, false); } SdrLayerAdmin& rAdmin = mpDoc->GetLayerAdmin(); pObj->SetLayer(rAdmin.GetLayerID(sUNO_LayerName_measurelines)); } else if (nSlotId == SID_DRAW_RECT) { if (mnFillTransparence > 0 && mnFillTransparence <= 100) rAttr.Put(XFillTransparenceItem(mnFillTransparence)); if (!msFillColor.isEmpty()) rAttr.Put(XFillColorItem(OUString(), strToColor(msFillColor))); if (!msShapeName.isEmpty()) pObj->SetName(msShapeName); switch(mnLineStyle) { case 0: rAttr.Put( XLineStyleItem(css::drawing::LineStyle_NONE ) ); break; case 1: rAttr.Put( XLineStyleItem(css::drawing::LineStyle_SOLID ) ); break; case 2: rAttr.Put( XLineStyleItem(css::drawing::LineStyle_DASH ) ); break; default: // Leave it to the defaults break; } } } /** * set line starts and ends for the object to be created */ static ::basegfx::B2DPolyPolygon getPolygon(const char* pResId, const SdrModel& rModel) { ::basegfx::B2DPolyPolygon aRetval; XLineEndListRef pLineEndList(rModel.GetLineEndList()); if( pLineEndList.is() ) { OUString aArrowName(SvxResId(pResId)); long nCount = pLineEndList->Count(); long nIndex; for( nIndex = 0; nIndex < nCount; nIndex++ ) { const XLineEndEntry* pEntry = pLineEndList->GetLineEnd(nIndex); if( pEntry->GetName() == aArrowName ) { aRetval = pEntry->GetLineEnd(); break; } } } return aRetval; } void FuConstructRectangle::SetLineEnds(SfxItemSet& rAttr, SdrObject const & rObj) { if ( !((rObj.GetObjIdentifier() == OBJ_EDGE && nSlotId != SID_TOOL_CONNECTOR && nSlotId != SID_CONNECTOR_LINE && nSlotId != SID_CONNECTOR_LINES && nSlotId != SID_CONNECTOR_CURVE) || nSlotId == SID_LINE_ARROW_START || nSlotId == SID_LINE_ARROW_END || nSlotId == SID_LINE_ARROWS || nSlotId == SID_LINE_ARROW_CIRCLE || nSlotId == SID_LINE_CIRCLE_ARROW || nSlotId == SID_LINE_ARROW_SQUARE || nSlotId == SID_LINE_SQUARE_ARROW) ) return; // set attributes of line start and ends SdrModel& rModel(rObj.getSdrModelFromSdrObject()); // arrowhead ::basegfx::B2DPolyPolygon aArrow( getPolygon( RID_SVXSTR_ARROW, rModel ) ); if( !aArrow.count() ) { ::basegfx::B2DPolygon aNewArrow; aNewArrow.append(::basegfx::B2DPoint(10.0, 0.0)); aNewArrow.append(::basegfx::B2DPoint(0.0, 30.0)); aNewArrow.append(::basegfx::B2DPoint(20.0, 30.0)); aNewArrow.setClosed(true); aArrow.append(aNewArrow); } // Circles ::basegfx::B2DPolyPolygon aCircle( getPolygon( RID_SVXSTR_CIRCLE, rModel ) ); if( !aCircle.count() ) { ::basegfx::B2DPolygon aNewCircle = ::basegfx::utils::createPolygonFromEllipse(::basegfx::B2DPoint(0.0, 0.0), 250.0, 250.0); aNewCircle.setClosed(true); aCircle.append(aNewCircle); } // Square ::basegfx::B2DPolyPolygon aSquare( getPolygon( RID_SVXSTR_SQUARE, rModel ) ); if( !aSquare.count() ) { ::basegfx::B2DPolygon aNewSquare; aNewSquare.append(::basegfx::B2DPoint(0.0, 0.0)); aNewSquare.append(::basegfx::B2DPoint(10.0, 0.0)); aNewSquare.append(::basegfx::B2DPoint(10.0, 10.0)); aNewSquare.append(::basegfx::B2DPoint(0.0, 10.0)); aNewSquare.setClosed(true); aSquare.append(aNewSquare); } SfxItemSet aSet( mpDoc->GetPool() ); mpView->GetAttributes( aSet ); // #i3908# Here, the default Line Start/End width for arrow construction is // set. To have the same value in all situations (construction) in i3908 // it was decided to change the default to 0.03 cm for all situations. long nWidth = 300; // (1/100th mm) // determine line width and calculate with it the line end width if( aSet.GetItemState( XATTR_LINEWIDTH ) != SfxItemState::DONTCARE ) { long nValue = aSet.Get( XATTR_LINEWIDTH ).GetValue(); if( nValue > 0 ) nWidth = nValue * 3; } switch (nSlotId) { case SID_CONNECTOR_ARROWS: case SID_CONNECTOR_LINE_ARROWS: case SID_CONNECTOR_LINES_ARROWS: case SID_CONNECTOR_CURVE_ARROWS: case SID_LINE_ARROWS: { // connector with arrow ends rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_ARROW), aArrow)); rAttr.Put(XLineStartWidthItem(nWidth)); rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_ARROW), aArrow)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_CONNECTOR_ARROW_START: case SID_CONNECTOR_LINE_ARROW_START: case SID_CONNECTOR_LINES_ARROW_START: case SID_CONNECTOR_CURVE_ARROW_START: case SID_LINE_ARROW_START: case SID_LINE_ARROW_CIRCLE: case SID_LINE_ARROW_SQUARE: { // connector with arrow start rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_ARROW), aArrow)); rAttr.Put(XLineStartWidthItem(nWidth)); } break; case SID_CONNECTOR_ARROW_END: case SID_CONNECTOR_LINE_ARROW_END: case SID_CONNECTOR_LINES_ARROW_END: case SID_CONNECTOR_CURVE_ARROW_END: case SID_LINE_ARROW_END: case SID_LINE_CIRCLE_ARROW: case SID_LINE_SQUARE_ARROW: { // connector with arrow end rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_ARROW), aArrow)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_CONNECTOR_CIRCLES: case SID_CONNECTOR_LINE_CIRCLES: case SID_CONNECTOR_LINES_CIRCLES: case SID_CONNECTOR_CURVE_CIRCLES: { // connector with circle ends rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineStartWidthItem(nWidth)); rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_CONNECTOR_CIRCLE_START: case SID_CONNECTOR_LINE_CIRCLE_START: case SID_CONNECTOR_LINES_CIRCLE_START: case SID_CONNECTOR_CURVE_CIRCLE_START: { // connector with circle start rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineStartWidthItem(nWidth)); } break; case SID_CONNECTOR_CIRCLE_END: case SID_CONNECTOR_LINE_CIRCLE_END: case SID_CONNECTOR_LINES_CIRCLE_END: case SID_CONNECTOR_CURVE_CIRCLE_END: { // connector with circle ends rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; } // and again, for the still missing ends switch (nSlotId) { case SID_LINE_ARROW_CIRCLE: { // circle end rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_LINE_CIRCLE_ARROW: { // circle start rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineStartWidthItem(nWidth)); } break; case SID_LINE_ARROW_SQUARE: { // square end rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_SQUARE), aSquare)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_LINE_SQUARE_ARROW: { // square start rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_SQUARE), aSquare)); rAttr.Put(XLineStartWidthItem(nWidth)); } break; } } SdrObjectUniquePtr FuConstructRectangle::CreateDefaultObject(const sal_uInt16 nID, const ::tools::Rectangle& rRectangle) { DBG_ASSERT( (nID != SID_DRAW_FONTWORK) && (nID != SID_DRAW_FONTWORK_VERTICAL ), "FuConstRectangle::CreateDefaultObject can not create Fontwork shapes!" ); // case SID_DRAW_LINE: // case SID_DRAW_XLINE: // case SID_DRAW_MEASURELINE: // case SID_LINE_ARROW_START: // case SID_LINE_ARROW_END: // case SID_LINE_ARROWS: // case SID_LINE_ARROW_CIRCLE: // case SID_LINE_CIRCLE_ARROW: // case SID_LINE_ARROW_SQUARE: // case SID_LINE_SQUARE_ARROW: // case SID_DRAW_RECT: // case SID_DRAW_RECT_NOFILL: // case SID_DRAW_RECT_ROUND: // case SID_DRAW_RECT_ROUND_NOFILL: // case SID_DRAW_SQUARE: // case SID_DRAW_SQUARE_NOFILL: // case SID_DRAW_SQUARE_ROUND: // case SID_DRAW_SQUARE_ROUND_NOFILL: // case SID_DRAW_ELLIPSE: // case SID_DRAW_ELLIPSE_NOFILL: // case SID_DRAW_CIRCLE: // case SID_DRAW_CIRCLE_NOFILL: // case SID_DRAW_CAPTION: // case SID_DRAW_CAPTION_VERTICAL: // case SID_TOOL_CONNECTOR: // case SID_CONNECTOR_ARROW_START: // case SID_CONNECTOR_ARROW_END: // case SID_CONNECTOR_ARROWS: // case SID_CONNECTOR_CIRCLE_START: // case SID_CONNECTOR_CIRCLE_END: // case SID_CONNECTOR_CIRCLES: // case SID_CONNECTOR_LINE: // case SID_CONNECTOR_LINE_ARROW_START: // case SID_CONNECTOR_LINE_ARROW_END: // case SID_CONNECTOR_LINE_ARROWS: // case SID_CONNECTOR_LINE_CIRCLE_START: // case SID_CONNECTOR_LINE_CIRCLE_END: // case SID_CONNECTOR_LINE_CIRCLES: // case SID_CONNECTOR_CURVE: // case SID_CONNECTOR_CURVE_ARROW_START: // case SID_CONNECTOR_CURVE_ARROW_END: // case SID_CONNECTOR_CURVE_ARROWS: // case SID_CONNECTOR_CURVE_CIRCLE_START: // case SID_CONNECTOR_CURVE_CIRCLE_END: // case SID_CONNECTOR_CURVE_CIRCLES: // case SID_CONNECTOR_LINES: // case SID_CONNECTOR_LINES_ARROW_START: // case SID_CONNECTOR_LINES_ARROW_END: // case SID_CONNECTOR_LINES_ARROWS: // case SID_CONNECTOR_LINES_CIRCLE_START: // case SID_CONNECTOR_LINES_CIRCLE_END: // case SID_CONNECTOR_LINES_CIRCLES: SdrObjectUniquePtr pObj(SdrObjFactory::MakeNewObject( mpView->getSdrModelFromSdrView(), mpView->GetCurrentObjInventor(), mpView->GetCurrentObjIdentifier())); if(pObj) { ::tools::Rectangle aRect(rRectangle); if(SID_DRAW_SQUARE == nID || SID_DRAW_SQUARE_NOFILL == nID || SID_DRAW_SQUARE_ROUND == nID || SID_DRAW_SQUARE_ROUND_NOFILL == nID || SID_DRAW_CIRCLE == nID || SID_DRAW_CIRCLE_NOFILL == nID) { // force quadratic ImpForceQuadratic(aRect); } Point aStart = aRect.TopLeft(); Point aEnd = aRect.BottomRight(); switch(nID) { case SID_DRAW_LINE: case SID_DRAW_XLINE: case SID_LINE_ARROW_START: case SID_LINE_ARROW_END: case SID_LINE_ARROWS: case SID_LINE_ARROW_CIRCLE: case SID_LINE_CIRCLE_ARROW: case SID_LINE_ARROW_SQUARE: case SID_LINE_SQUARE_ARROW: { if( auto pPathObj = dynamic_cast( pObj.get() ) ) { sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2); ::basegfx::B2DPolygon aB2DPolygon; aB2DPolygon.append(::basegfx::B2DPoint(aStart.X(), nYMiddle)); aB2DPolygon.append(::basegfx::B2DPoint(aEnd.X(), nYMiddle)); pPathObj->SetPathPoly(::basegfx::B2DPolyPolygon(aB2DPolygon)); } else { OSL_FAIL("Object is NO line object"); } break; } case SID_DRAW_MEASURELINE: { if( auto pMeasureObj = dynamic_cast< SdrMeasureObj *>( pObj.get() ) ) { sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2); pMeasureObj->SetPoint(Point(aStart.X(), nYMiddle), 0); pMeasureObj->SetPoint(Point(aEnd.X(), nYMiddle), 1); } else { OSL_FAIL("Object is NO measure object"); } break; } case SID_TOOL_CONNECTOR: case SID_CONNECTOR_ARROW_START: case SID_CONNECTOR_ARROW_END: case SID_CONNECTOR_ARROWS: case SID_CONNECTOR_CIRCLE_START: case SID_CONNECTOR_CIRCLE_END: case SID_CONNECTOR_CIRCLES: case SID_CONNECTOR_LINE: case SID_CONNECTOR_LINE_ARROW_START: case SID_CONNECTOR_LINE_ARROW_END: case SID_CONNECTOR_LINE_ARROWS: case SID_CONNECTOR_LINE_CIRCLE_START: case SID_CONNECTOR_LINE_CIRCLE_END: case SID_CONNECTOR_LINE_CIRCLES: case SID_CONNECTOR_CURVE: case SID_CONNECTOR_CURVE_ARROW_START: case SID_CONNECTOR_CURVE_ARROW_END: case SID_CONNECTOR_CURVE_ARROWS: case SID_CONNECTOR_CURVE_CIRCLE_START: case SID_CONNECTOR_CURVE_CIRCLE_END: case SID_CONNECTOR_CURVE_CIRCLES: case SID_CONNECTOR_LINES: case SID_CONNECTOR_LINES_ARROW_START: case SID_CONNECTOR_LINES_ARROW_END: case SID_CONNECTOR_LINES_ARROWS: case SID_CONNECTOR_LINES_CIRCLE_START: case SID_CONNECTOR_LINES_CIRCLE_END: case SID_CONNECTOR_LINES_CIRCLES: { if( auto pEdgeObj = dynamic_cast< SdrEdgeObj *>( pObj.get() ) ) { pEdgeObj->SetTailPoint(false, aStart); pEdgeObj->SetTailPoint(true, aEnd); } else { OSL_FAIL("Object is NO connector object"); } break; } case SID_DRAW_CAPTION: case SID_DRAW_CAPTION_VERTICAL: { if( auto pCaptionObj = dynamic_cast< SdrCaptionObj *>( pObj.get() ) ) { bool bIsVertical(SID_DRAW_CAPTION_VERTICAL == nID); pCaptionObj->SetVerticalWriting(bIsVertical); if(bIsVertical) { SfxItemSet aSet(pObj->GetMergedItemSet()); aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); pObj->SetMergedItemSet(aSet); } // The default text is not inserted anymore. pCaptionObj->SetLogicRect(aRect); pCaptionObj->SetTailPos( aRect.TopLeft() - Point(aRect.GetWidth() / 2, aRect.GetHeight() / 2)); } else { OSL_FAIL("Object is NO caption object"); } break; } default: { pObj->SetLogicRect(aRect); break; } } SfxItemSet aAttr(mpDoc->GetPool()); SetStyleSheet(aAttr, pObj.get()); SetAttributes(aAttr, pObj.get()); SetLineEnds(aAttr, *pObj); pObj->SetMergedItemSet(aAttr); } return pObj; } } // end of namespace sd /* vim:set shiftwidth=4 softtabstop=4 expandtab: */