/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace ::com::sun::star; namespace { const OUString sDataDirectory("svx/qa/unit/data/"); /// Tests for svx/source/customshapes/ code. class CustomshapesTest : public test::BootstrapFixture, public unotest::MacrosTest { protected: uno::Reference mxComponent; // get shape nShapeIndex from page 0 uno::Reference getShape(sal_uInt8 nShapeIndex); sal_uInt8 countShapes(); public: virtual void setUp() override { test::BootstrapFixture::setUp(); mxDesktop.set(frame::Desktop::create(m_xContext)); } virtual void tearDown() override { if (mxComponent.is()) { mxComponent->dispose(); } test::BootstrapFixture::tearDown(); } }; uno::Reference CustomshapesTest::getShape(sal_uInt8 nShapeIndex) { uno::Reference xDrawPagesSupplier(mxComponent, uno::UNO_QUERY_THROW); CPPUNIT_ASSERT_MESSAGE("Could not get XDrawPagesSupplier", xDrawPagesSupplier.is()); uno::Reference xDrawPages(xDrawPagesSupplier->getDrawPages()); uno::Reference xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW); CPPUNIT_ASSERT_MESSAGE("Could not get xDrawPage", xDrawPage.is()); uno::Reference xShape(xDrawPage->getByIndex(nShapeIndex), uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get xShape", xShape.is()); return xShape; } sal_uInt8 CustomshapesTest::countShapes() { uno::Reference xDrawPagesSupplier(mxComponent, uno::UNO_QUERY_THROW); CPPUNIT_ASSERT_MESSAGE("Could not get XDrawPagesSupplier", xDrawPagesSupplier.is()); uno::Reference xDrawPages(xDrawPagesSupplier->getDrawPages()); uno::Reference xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW); CPPUNIT_ASSERT_MESSAGE("Could not get xDrawPage", xDrawPage.is()); return xDrawPage->getCount(); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testViewBoxLeftTop) { // tdf#121890 formula values "left" and "top" are wrongly calculated // Load a document with two custom shapes of type "non-primitive" OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "viewBox_positive_twolines_strict.odp"; mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Get the shape "leftright". Error was, that the identifier "left" was always set to zero, thus // the path was outside the frame rectangle for a viewBox having a positive "left" value. uno::Reference xShapeLR(getShape(0)); uno::Reference xShapeLRProps(xShapeLR, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape 'leftright' properties", xShapeLRProps.is()); awt::Rectangle aFrameRectLR; xShapeLRProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRectLR; awt::Rectangle aBoundRectLR; xShapeLRProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectLR; // difference should be zero, but allow some rounding errors CPPUNIT_ASSERT_LESS(static_cast(3), labs(aFrameRectLR.X - aBoundRectLR.X)); // Get the shape "topbottom". Error was, that the identifier "top" was always set to zero, thus // the path was outside the frame rectangle for a viewBox having a positive "top" value. uno::Reference xShapeTB(getShape(1)); uno::Reference xShapeTBProps(xShapeTB, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape 'topbottom' properties", xShapeTBProps.is()); awt::Rectangle aFrameRectTB; xShapeTBProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRectTB; awt::Rectangle aBoundRectTB; xShapeTBProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectTB; // difference should be zero, but allow some rounding errors CPPUNIT_ASSERT_LESS(static_cast(3), labs(aFrameRectTB.Y - aBoundRectTB.Y)); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testAccuracyCommandX) { // 121761 Increase accuracy of quarter circles drawn by command X or Y // The loaded document has a quarter circle with radius 10000 (unit 1/100 mm) // which is rotated by 45deg. The test considers the segment. OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf121761_Accuracy_command_X.odp"; mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Get the shape "arc_45deg_rotated". Error was, that a Bezier curve with bad parameters // was used, thus the segment height was obviously smaller than for a true circle. // Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; double fHeight = static_cast(aBoundRect.Height); // The tolerance is a guess, might be smaller. CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("segment height out of tolerance", 2942.0, fHeight, 8.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testToggleCommandXY) { // 121952 Toggle x- and y-direction if command X has several parameters // The loaded document has a shape with command X and two parameter placed on a diagonal. // The radius of the quarter circles are both 10000 (unit 1/100 mm). // The shape is rotated by 45deg, so you get two segments, one up and one down. OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf121952_Toggle_direction_command_X.odp"; mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that the second segment was drawn with same direction as first one. If drawn // correctly, the bounding box height of the segments together is about twice the single // segment height. Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; double fHeight = static_cast(aBoundRect.Height); // The tolerance is a guess, might be smaller. CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("segment height out of tolerance", 5871.0, fHeight, 16.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testMultipleMoveTo) { // tdf122964 Multiple moveTo has to be treated as lineTo in draw:enhanced-path // Load a document with path "M 0 0 5 10 10 0 N" OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf122964_MultipleMoveTo.odg"; mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that the second and further parameter pairs were treated as moveTo, // and so the generated path was empty, resulting in zero width and height of the // bounding box. It has to be treated same as "M 0 0 L 5 10 10 0 N". uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; bool bIsZero(aBoundRect.Height == 0 && aBoundRect.Width == 0); CPPUNIT_ASSERT_MESSAGE("Path is empty", !bIsZero); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testWidthOrientationCommandU) { // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document with path "M 750 0 L 750 500 250 500 250 0 U 500 0 500 500 0 180 N" // in viewBox="0 0 1000 500" and width="10cm", height="5cm". const OUString sFileName("tdf121845_WidthOrientation_command_U.odg"); const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that the width and height of the ellipse was halved and that the ellipse // was not drawn clockwise but counter clockwise. uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const double fWidth = static_cast(aBoundRect.Width); // Need some tolerance for line width CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("wrong width", 10000.0, fWidth, 40.0); const double fHeight = static_cast(aBoundRect.Height); // Wrong orientation draws segment above the top of the viewBox and so increases 'Height'. CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("wrong orientation", 5000.0, fHeight, 40.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testHalfEllipseVML) { // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document which was converted from VML to doc by Word. It had a VML // path="m750,al500,,500,500,,-11796480e" resulting in a lower half circle. const OUString sFileName("tdf121845_HalfEllipseVML.doc"); const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that a full circle instead of the half circle was draw. uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const double fDiff2HmW = static_cast(2 * aBoundRect.Height - aBoundRect.Width); // Need some tolerance for line width CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("not a half circle", 0.0, fDiff2HmW, 40.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testLargeSwingAngleVML) { // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document which was converted from VML to doc by Word. It had a VML // path="al50,50,45,45,2621440,31457280e" resulting in a full circle plus 120 deg segment. const OUString sFileName("tdf121845_start40_swing480.doc"); const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that only the 120 deg segment was drawn. uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const double fDiffWmH = static_cast(aBoundRect.Width - aBoundRect.Height); // Need some tolerance for line width CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("Full circle plus segment expected", 0.0, fDiffWmH, 10.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf121845_two_commands_U) { // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document with path "U 950 250 200 200 90 180 250 250 200 200 180 270 N" // Error was, that the second ellipse segment was interpreted as command T and // thus a line from first to second segment was drawn. const OUString sFileName("tdf121845_Two_commands_U.odg"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // In case no line is drawn, two polygons are generated; with line only one polygon SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); SdrPathObj* pPathObj = static_cast(aCustomShape2d.CreateLineGeometry()); CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast(2), aPolyPolygon.count()); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124212_handle_position) { // tdf124212 Adjustment handle reacts wrongly, if custom shape has a non // default viewBox. Load a document with svg:viewBox="10800 0 10800 21600" // Error was, that moving the controller results in a handle position that // does not reflect the movement. const OUString sFileName("tdf124212_handle_position.odg"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // The shape has one, horizontal adjust handle. SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); Point aInitialPosition; aCustomShape2d.GetHandlePosition(0, aInitialPosition); css::awt::Point aDesiredPosition(aInitialPosition.X() + 1000, aInitialPosition.Y()); aCustomShape2d.SetHandleControllerPosition(0, aDesiredPosition); Point aObservedPosition; aCustomShape2d.GetHandlePosition(0, aObservedPosition); sal_Int32 nDesiredX(aDesiredPosition.X); // awt::Point sal_Int32 nObservedX(aObservedPosition.X()); // tools::Point CPPUNIT_ASSERT_EQUAL_MESSAGE("handle X coordinate", nDesiredX, nObservedX); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124029_arc_position) { // tdf121029 MS binary custom shape mso_sptArc has wrong position // MS uses the sector for position reference. Error was, that // LibreOffice has used the underlying ellipse. const OUString sFileName("tdf124029_Arc_position.doc"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // The visual wrong position is due to a wrong shape width. uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aFrameRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRect; CPPUNIT_ASSERT_EQUAL_MESSAGE("shape width", static_cast(1610), static_cast(aFrameRect.Width)); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124740_handle_path_coordsystem) { // tdf124740 OOXML shape with handle and w and h attribute on path has wrong // handle position // The handle position was scaled erroneously twice. const OUString sFileName("tdf124740_HandleInOOXMLUserShape.pptx"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // The shape has one, horizontal adjust handle. It is about 1/5 of 10cm from left // shape edge, shape is 6cm from left . That results in a position // of 8cm from left page edge, which is 8000 in 1/100 mm unit. SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); Point aPosition; aCustomShape2d.GetHandlePosition(0, aPosition); double fX(aPosition.X()); // tolerance for rounding to integer CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("handle X coordinate", 8000.0, fX, 2.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf115813_OOXML_XY_handle) { // The test covers all preset shapes with handles. Only these ones are // excluded: arc, blockArc, chord, circularArrow, gear6, gear9, mathNotEqual, pie, // leftCircularArrow, leftRightCircularArrow, swooshArrow. // Connectors are included as ordinary shapes to prevent converting. // Error was, that the handle movement and the changes to the shape did not follow // the mouse movement. const OUString sFileName("tdf115813_HandleMovementOOXMLPresetShapes.pptx"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); OUString sErrors; // values in vector InteractionsHandles are in 1/100 mm and refer to page for (sal_uInt8 i = 0; i < countShapes(); i++) { uno::Reference xShape(getShape(i)); SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); OUString sShapeType("non-primitive"); // default for ODF const SdrCustomShapeGeometryItem& rGeometryItem( rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY)); const uno::Any* pAny = rGeometryItem.GetPropertyValueByName("Type"); if (pAny) *pAny >>= sShapeType; sal_uInt8 nHandlesCount = rSdrObjCustomShape.GetInteractionHandles().size(); for (sal_uInt8 j = 0; j < nHandlesCount; j++) { css::awt::Point aInitialPosition( rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); // The handles are initialized in the test document, so that if the handle is moveable in // that direction at all, then it can move at least with an amount of 100. Point aDesiredPosition(aInitialPosition.X + 100, aInitialPosition.Y + 100); rSdrObjCustomShape.DragMoveCustomShapeHdl(aDesiredPosition, j, false); css::awt::Point aObservedPosition( rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); sal_Int32 nDesiredX(aDesiredPosition.X()); // tools::Point sal_Int32 nDesiredY(aDesiredPosition.Y()); sal_Int32 nObservedX(aObservedPosition.X); // css::awt::Point sal_Int32 nObservedY(aObservedPosition.Y); // If a handle only moves in one direction, the difference is 100 for the other direction. // There exists some rounding differences, therefore '<= 1' instead of '== 0'. // The condition has the form '!(good cases)'. if (!((abs(nDesiredX - nObservedX) <= 1 && abs(nDesiredY - nObservedY) == 100) || (abs(nDesiredX - nObservedX) == 100 && abs(nDesiredY - nObservedY) <= 1) || (abs(nDesiredX - nObservedX) <= 1 && abs(nDesiredY - nObservedY) <= 1))) { sErrors += "\n" + //sErrors += OUString(sal_Unicode(10)); OUString::number(i) + " " + sShapeType + ": " + OUString::number(j) + " X " + OUString::number(nDesiredX) + "|" + OUString::number(nObservedX) + " Y " + OUString::number(nDesiredY) + "|" + OUString::number(nObservedY); } } } CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testQuadraticCurveTo) { // tdf125782 command Q (quadraticcurveto) uses wrong 'current point'. // When converting to cubic Bezier curve, this had resulted in a wrong first control point. // The quadraticcurveto segment starts in shape center in the test file. The first control // point should produce a horizontal tangent in the start point. const OUString sFileName("tdf125782_QuadraticCurveTo.odg"); const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const double fHeight = static_cast(aBoundRect.Height); //Add some tolerance CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("bad height of quadraticcurveto", 3004, fHeight, 10.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf126512_OOXML_handle_in_ODP) { // The test covers all preset shapes with handles. Connectors are included as ordinary // shapes to prevent converting. The file was created in PowerPoint 365 and then // opened and exported to ODF format by LibreOffice. // Error was, that for shapes, which were originally imported from OOXML, the handles // could not be moved at all. const OUString sFileName("tdf126512_OOXMLHandleMovementInODF.odp"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); OUString sErrors; // sErrors collects shape type and handle index for failing cases for (sal_uInt8 i = 0; i < countShapes(); i++) { uno::Reference xShape(getShape(i)); SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); OUString sShapeType("non-primitive"); // only to initialize, value not used here const SdrCustomShapeGeometryItem& rGeometryItem( rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY)); const uno::Any* pAny = rGeometryItem.GetPropertyValueByName("Type"); if (pAny) *pAny >>= sShapeType; sal_uInt8 nHandlesCount = rSdrObjCustomShape.GetInteractionHandles().size(); for (sal_uInt8 j = 0; j < nHandlesCount; j++) { css::awt::Point aInitialPosition( rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); // The handles are initialized in the test document, so that if the handle is moveable // in that direction at all, then it can move at least with an amount of 100. Point aDesiredPosition(aInitialPosition.X + 100, aInitialPosition.Y + 100); rSdrObjCustomShape.DragMoveCustomShapeHdl(aDesiredPosition, j, false); css::awt::Point aObservedPosition( rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); if (aInitialPosition.X == aObservedPosition.X && aInitialPosition.Y == aObservedPosition.Y) { sErrors += "\n" + OUString::number(i) + " " + sShapeType + " " + OUString::number(j); } } } CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Mirror) { // The document contains two shapes, one with horizontal flip, the other with vertical // flip. They are diamonds, so their text frame is symmetric to the center of the shape. // The shapes have not stroke and no fill, so that the bounding box surrounds the text // and therefore equals approximately the text frame. // Error was, that because of wrong calculation, the flipped shapes do not use the // text frame but the frame rectangle for their text. const OUString sFileName("tdf127785_Mirror.odp"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. uno::Reference xShapeV(getShape(0)); uno::Reference xShapeVProps(xShapeV, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeVProps.is()); awt::Rectangle aBoundRectV; xShapeVProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectV; const sal_Int32 nHeightV = aBoundRectV.Height; const sal_Int32 nWidthV = aBoundRectV.Width; const sal_Int32 nLeftV = aBoundRectV.X; const sal_Int32 nTopV = aBoundRectV.Y; if (abs(nHeightV - 4149) > 5 || abs(nWidthV - 3819) > 5) sErrors += "Flip vertical wrong size."; if (abs(nLeftV - 3155) > 5 || abs(nTopV - 3736) > 5) sErrors += " Flip vertical wrong position."; uno::Reference xShapeH(getShape(1)); uno::Reference xShapeHProps(xShapeH, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeHProps.is()); awt::Rectangle aBoundRectH; xShapeHProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectH; const sal_Int32 nHeightH = aBoundRectH.Height; const sal_Int32 nWidthH = aBoundRectH.Width; const sal_Int32 nLeftH = aBoundRectH.X; const sal_Int32 nTopH = aBoundRectH.Y; if (abs(nHeightH - 4149) > 5 || abs(nWidthH - 3819) > 5) sErrors += " Flip horizontal wrong size."; if (abs(nLeftH - 15026) > 5 || abs(nTopH - 4115) > 5) sErrors += " Flip horizontal wrong position."; CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf126060_3D_Z_Rotation) { // The document contains one textbox with inside overflowed text // and the text has 3D z rotation. When we open the document we // should see the text vertically and rotated from text bound center not text box. const OUString sFileName("tdf126060_3D_Z_Rotation.pptx"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. uno::Reference xShape(getShape(0)); SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); if (rSdrObjCustomShape.GetCameraZRotation() != 90) sErrors += "Wrong text camera Z rotation"; basegfx::B2DHomMatrix aObjectTransform; basegfx::B2DPolyPolygon aObjectPolyPolygon; rSdrObjCustomShape.TRGetBaseGeometry(aObjectTransform, aObjectPolyPolygon); if (aObjectTransform.get(0, 0) != 1492 || aObjectTransform.get(0, 1) != 0 || aObjectTransform.get(0, 2) != 1129 || aObjectTransform.get(1, 0) != 0 || aObjectTransform.get(1, 1) != 2500 || aObjectTransform.get(1, 2) != 5846) sErrors += " Wrong transformation matrix"; CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Asymmetric) { // The document contains a shapes with vertical flip and text frame asymmetrical // to shape. The shape has not stroke and no fill, so that the bounding box surrounds // the text and therefore equals approximately the text frame. // Error was, that the 180deg text rotation was not compensated for the position of // the flipped text box. const OUString sFileName("tdf127785_asymmetricTextBoxFlipV.odg"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const sal_Int32 nLeft = aBoundRect.X; const sal_Int32 nTop = aBoundRect.Y; const sal_Int32 nRight = aBoundRect.X + aBoundRect.Width - 1; const sal_Int32 nBottom = aBoundRect.Y + aBoundRect.Height - 1; if (abs(nLeft - 10034) > 5) sErrors += "wrong left"; if (abs(nRight - 12973) > 5) sErrors += " wrong right"; if (abs(nTop - 7892) > 5) sErrors += " wrong top"; if (abs(nBottom - 14884) > 5) sErrors += " wrong bottom"; CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_TextRotateAngle) { // The document contains a shapes with vertical flip and a text frame with own // rotate angle. The shape has not stroke and no fill, so that the bounding box // surrounds the text and therefore equals approximately the text frame. // Error was, that the compensation for the 180° rotation added for vertical // flip were not made to the text box position but to the text matrix. const OUString sFileName("tdf127785_TextRotateAngle.odp"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const sal_Int32 nLeft = aBoundRect.X; const sal_Int32 nTop = aBoundRect.Y; const sal_Int32 nRight = aBoundRect.X + aBoundRect.Width - 1; const sal_Int32 nBottom = aBoundRect.Y + aBoundRect.Height - 1; if (abs(nLeft - 5054) > 5) sErrors += "wrong left"; if (abs(nRight - 6374) > 5) sErrors += " wrong right"; if (abs(nTop - 4516) > 5) sErrors += " wrong top"; if (abs(nBottom - 8930) > 5) sErrors += " wrong bottom"; CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf128413_tbrlOnOff) { // The document contains a rotated shape with text. The error was, that switching // tb-rl writing-mode on, changed the shape size and position. const OUString sFileName("tdf128413_tbrl_OnOff.odp"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aOrigRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aOrigRect; SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); rSdrObjCustomShape.SetVerticalWriting(true); awt::Rectangle aObservedRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aObservedRect; OUString sError; if (aOrigRect.Width != aObservedRect.Width || aOrigRect.Height != aObservedRect.Height || aOrigRect.X != aObservedRect.X || aOrigRect.Y != aObservedRect.Y) { sError = "Shape has wrong size or wrong position."; } CPPUNIT_ASSERT_EQUAL(OUString(), sError); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf129532_MatrixFlipV) { // The document contains two rotated shapes with the same geometry. For one of them // "matrix(1 0 0 -1 0cm 0cm)" was manually added to the value of the draw:transform // attribute. That should result in mirroring on the x-axis. Error was, that the lines // which are drawn on the shape rectangle were mirrored, but not the rectangle itself. // The rectangle was only shifted. const OUString sFileName("tdf129532_MatrixFlipV.odg"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); OUString sErrors; // sErrors collects the errors and should be empty in case all is OK. uno::Reference xShape0(getShape(0)); uno::Reference xShape0Props(xShape0, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShape0Props.is()); awt::Rectangle aBoundRect0; xShape0Props->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect0; uno::Reference xShape1(getShape(1)); uno::Reference xShape1Props(xShape1, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShape1Props.is()); awt::Rectangle aBoundRect1; xShape1Props->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect1; // The size of the two BoundRect rectangles are the same in case of correct // vertical mirroring. if (aBoundRect0.Width != aBoundRect1.Width) { sErrors += "\n Width expected: " + OUString::number(aBoundRect1.Width) + " actual: " + OUString::number(aBoundRect0.Width); } if (aBoundRect0.Height != aBoundRect1.Height) { sErrors += "\n Height expected: " + OUString::number(aBoundRect1.Height) + " actual: " + OUString::number(aBoundRect0.Height); } CPPUNIT_ASSERT_EQUAL(OUString(), sErrors); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf103474_commandT_CaseZeroHeight) { // tdf103474 custom shape with command T to create quater ellipses in a bracket, // corner case where the ellipse has zero height. // Error was, that the calculation of the circle angle from the ellipse // angle results in a wrong angle for the case 180° and height zero. OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf103474_commandT_CaseZeroHeight.odp"; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // The end points of the straight line segment should have the same x-coordinate of left // of shape, and different y-coordinates, one top and the other bottom of the shape. SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); SdrPathObj* pPathObj = static_cast(aCustomShape2d.CreateLineGeometry()); CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast(1), aPolyPolygon.count()); const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); // Get the middle points of the polygon. They are the endpoints of the // straight line segment regardless of the quarter ellipse parts, because // the shape is symmetric. const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(aPolygon.count() / 2 - 1)); const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() / 2)); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart x-coordinate", 13999.0, aStart.getX(), 1.0); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd x-coordinate", 13999.0, aEnd.getX(), 1.0); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart y-coordinate", 9999.0, aStart.getY(), 1.0); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd y-coordinate", 1999.0, aEnd.getY(), 1.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf103474_commandG_CaseZeroHeight) { // Some as above, but with shape with command G. OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf103474_commandG_CaseZeroHeight.odp"; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // The end points of the straight line segment should have the same x-coordinate of left // of shape, and different y-coordinates, one top and the other bottom of the shape. SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); SdrPathObj* pPathObj = static_cast(aCustomShape2d.CreateLineGeometry()); CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast(1), aPolyPolygon.count()); const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); // Get the middle points of the polygon. They are the endpoints of the // straight line segment regardless of the quarter ellipse parts, because // the shape is symmetric. const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(aPolygon.count() / 2 - 1)); const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() / 2)); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart x-coordinate", 1999.0, aStart.getX(), 1.0); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd x-coordinate", 1999.0, aEnd.getX(), 1.0); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart y-coordinate", 9999.0, aStart.getY(), 1.0); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd y-coordinate", 1999.0, aEnd.getY(), 1.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf122323_largeSwingAngle) { // SwingAngles are clamped to [-360;360] in MS Office. Error was, that LO calculated // the end angle and used it modulo 360, no full ellipse was drawn. OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf122323_swingAngle_larger360deg.pptx"; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); SdrPathObj* pPathObj = static_cast(aCustomShape2d.CreateLineGeometry()); CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(0)); // last point comes from line to center, therefore -2 instead of -1 const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() - 2)); CPPUNIT_ASSERT_EQUAL_MESSAGE("Start <> End", aStart, aEnd); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf136176) { // Error was, that fObjectRotation was not correctly updated after shearing. // The problem becomes visible after save and reload. OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf136176_rot30_flip.odg"; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); for (sal_uInt16 i = 0; i < 3; i++) { // get shape uno::Reference xShape(getShape(i)); SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); // apply shearing 20deg const Point aCenter = rSdrObjCustomShape.GetSnapRect().Center(); rSdrObjCustomShape.Shear(aCenter, 2000, tan(basegfx::deg2rad(20.0)), false); } // Save and reload uno::Reference xStorable(mxComponent, uno::UNO_QUERY); utl::TempFile aTempFile; utl::MediaDescriptor aMediaDescriptor; aMediaDescriptor["FilterName"] <<= OUString("draw8"); xStorable->storeToURL(aTempFile.GetURL(), aMediaDescriptor.getAsConstPropertyValueList()); mxComponent->dispose(); mxComponent = loadFromDesktop(aTempFile.GetURL()); // Expected values of point 4 of the shape polygon const OString sTestCase[] = { "FlipH", "FlipV", "FlipHV" }; const double fX[] = { 14981.0, 3849.0, 15214.0 }; const double fY[] = { 9366.0, 16464.0, 23463.0 }; // Verify correct positions for (sal_uInt16 i = 0; i < 3; i++) { // Get shape const uno::Reference xShape(getShape(i)); const SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); // Create polygon from shape and examine point 4 of the polygon const basegfx::B2DPolyPolygon aLineGeometry = rSdrObjCustomShape.GetLineGeometry(false); const basegfx::B2DPoint aPoint(aLineGeometry.getB2DPolygon(0).getB2DPoint(4)); // Allow some tolerance for rounding errors if (fabs(aPoint.getX() - fX[i]) > 2.0 || fabs(aPoint.getY() - fY[i]) > 2.0) { CPPUNIT_ASSERT_EQUAL_MESSAGE(sTestCase[i].getStr(), aPoint, basegfx::B2DPoint(fX[i], fY[i])); } } } } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */