/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace ::com::sun::star; using namespace ::com::sun::star::uno; using namespace ::com::sun::star::lang; using namespace ::com::sun::star::scanner; #define SWVIEWFLAGS SfxViewShellFlags::HAS_PRINTOPTIONS // Statics. OMG. bool bDocSzUpdated = true; SvxSearchItem* SwView::s_pSrchItem = nullptr; bool SwView::s_bExtra = false; bool SwView::s_bFound = false; bool SwView::s_bJustOpened = false; SearchAttrItemList* SwView::s_pSearchList = nullptr; SearchAttrItemList* SwView::s_pReplaceList = nullptr; SfxDispatcher &SwView::GetDispatcher() { return *GetViewFrame()->GetDispatcher(); } void SwView::ImpSetVerb( SelectionType nSelType ) { bool bResetVerbs = m_bVerbsActive; if ( !GetViewFrame()->GetFrame().IsInPlace() && (SelectionType::Ole|SelectionType::Graphic) & nSelType ) { if ( m_pWrtShell->IsSelObjProtected(FlyProtectFlags::Content) == FlyProtectFlags::NONE ) { if ( nSelType & SelectionType::Ole ) { SetVerbs( GetWrtShell().GetOLEObject()->getSupportedVerbs() ); m_bVerbsActive = true; bResetVerbs = false; } } } if ( bResetVerbs ) { SetVerbs( Sequence< embed::VerbDescriptor >() ); m_bVerbsActive = false; } } // Called by the SwEditWin when it gets the focus. void SwView::GotFocus() const { // if we got the focus, and the form shell *is* on the top of the dispatcher // stack, then we need to rebuild the stack (the form shell doesn't belong to // the top then) const SfxDispatcher& rDispatcher = const_cast< SwView* >( this )->GetDispatcher(); SfxShell* pTopShell = rDispatcher.GetShell( 0 ); FmFormShell* pAsFormShell = dynamic_cast( pTopShell ); if ( pAsFormShell ) { pAsFormShell->ForgetActiveControl(); const_cast< SwView* >( this )->AttrChangedNotify(nullptr); } else if ( m_pPostItMgr ) { SwAnnotationShell* pAsAnnotationShell = dynamic_cast( pTopShell ); if ( pAsAnnotationShell ) { m_pPostItMgr->SetActiveSidebarWin(nullptr); const_cast< SwView* >( this )->AttrChangedNotify(nullptr); } } if( GetWrtShellPtr() ) { SwWrtShell& rWrtShell = GetWrtShell(); rWrtShell.GetDoc()->getIDocumentLayoutAccess().SetCurrentViewShell( GetWrtShellPtr() ); rWrtShell.GetDoc()->getIDocumentSettingAccess().set( DocumentSettingId::BROWSE_MODE, rWrtShell.GetViewOptions()->getBrowseMode() ); } } // called by the FormShell when a form control is focused. This is // a request to put the form shell on the top of the dispatcher stack IMPL_LINK_NOARG(SwView, FormControlActivated, LinkParamNone*, void) { // if a form control has been activated, and the form shell is not on the top // of the dispatcher stack, then we need to activate it const SfxDispatcher& rDispatcher = GetDispatcher(); const SfxShell* pTopShell = rDispatcher.GetShell( 0 ); const FmFormShell* pAsFormShell = dynamic_cast( pTopShell ); if ( !pAsFormShell ) { // if we're editing text currently, cancel this SdrView *pSdrView = m_pWrtShell ? m_pWrtShell->GetDrawView() : nullptr; if ( pSdrView && pSdrView->IsTextEdit() ) pSdrView->SdrEndTextEdit( true ); AttrChangedNotify(nullptr); } } namespace { uno::Reference getLayoutManager(const SfxViewFrame& rViewFrame) { uno::Reference xLayoutManager; uno::Reference xPropSet(rViewFrame.GetFrame().GetFrameInterface(), uno::UNO_QUERY); if (xPropSet.is()) { try { xLayoutManager.set(xPropSet->getPropertyValue("LayoutManager"), uno::UNO_QUERY); } catch (const Exception& e) { SAL_WARN("sw.ui", "Failure getting layout manager: " + e.Message); } } return xLayoutManager; } } void SwView::ShowUIElement(const OUString& sElementURL) const { if (auto xLayoutManager = getLayoutManager(*GetViewFrame())) { if (!xLayoutManager->getElement(sElementURL).is()) { xLayoutManager->createElement(sElementURL); xLayoutManager->showElement(sElementURL); } } } void SwView::SelectShell() { // Attention: Maintain the SelectShell for the WebView additionally if(m_bInDtor) return; // Decision if the UpdateTable has to be called bool bUpdateTable = false; const SwFrameFormat* pCurTableFormat = m_pWrtShell->GetTableFormat(); if(pCurTableFormat && pCurTableFormat != m_pLastTableFormat) { bUpdateTable = true; // can only be executed later } m_pLastTableFormat = pCurTableFormat; //SEL_TBL and SEL_TBL_CELLS can be ORed! SelectionType nNewSelectionType = m_pWrtShell->GetSelectionType() & ~SelectionType::TableCell; if ( m_pFormShell && m_pFormShell->IsActiveControl() ) nNewSelectionType |= SelectionType::FormControl; if ( nNewSelectionType == m_nSelectionType ) { GetViewFrame()->GetBindings().InvalidateAll( false ); if ( m_nSelectionType & SelectionType::Ole || m_nSelectionType & SelectionType::Graphic ) // For graphs and OLE the verb can be modified of course! ImpSetVerb( nNewSelectionType ); } else { SfxDispatcher &rDispatcher = GetDispatcher(); SwToolbarConfigItem *pBarCfg = SW_MOD()->GetToolbarConfig(); if ( m_pShell ) { rDispatcher.Flush(); // Really erase all cached shells //Remember to the old selection which toolbar was visible ToolbarId eId = rDispatcher.GetObjectBarId(SFX_OBJECTBAR_OBJECT); if (eId != ToolbarId::None) pBarCfg->SetTopToolbar(m_nSelectionType, eId); for ( sal_uInt16 i = 0; true; ++i ) { SfxShell *pSfxShell = rDispatcher.GetShell( i ); if ( dynamic_cast< const SwBaseShell *>( pSfxShell ) != nullptr || dynamic_cast< const SwDrawTextShell *>( pSfxShell ) != nullptr || dynamic_cast< const svx::ExtrusionBar*>( pSfxShell ) != nullptr || dynamic_cast< const svx::FontworkBar*>( pSfxShell ) != nullptr || dynamic_cast< const SwAnnotationShell *>( pSfxShell ) != nullptr ) { rDispatcher.Pop( *pSfxShell, SfxDispatcherPopFlags::POP_DELETE ); } else if ( dynamic_cast< const FmFormShell *>( pSfxShell ) != nullptr ) { rDispatcher.Pop( *pSfxShell ); } else break; } } bool bInitFormShell = false; if (!m_pFormShell) { bInitFormShell = true; m_pFormShell = new FmFormShell( this ); m_pFormShell->SetControlActivationHandler( LINK( this, SwView, FormControlActivated ) ); StartListening(*m_pFormShell); } bool bSetExtInpCntxt = false; m_nSelectionType = nNewSelectionType; ShellMode eShellMode; if ( !( m_nSelectionType & SelectionType::FormControl ) ) rDispatcher.Push( *m_pFormShell ); m_pShell = new SwNavigationShell( *this ); rDispatcher.Push( *m_pShell ); if ( m_nSelectionType & SelectionType::Ole ) { eShellMode = ShellMode::Object; m_pShell = new SwOleShell( *this ); rDispatcher.Push( *m_pShell ); } else if ( m_nSelectionType & SelectionType::Frame || m_nSelectionType & SelectionType::Graphic) { eShellMode = ShellMode::Frame; m_pShell = new SwFrameShell( *this ); rDispatcher.Push( *m_pShell ); if(m_nSelectionType & SelectionType::Graphic ) { eShellMode = ShellMode::Graphic; m_pShell = new SwGrfShell( *this ); rDispatcher.Push( *m_pShell ); } } else if ( m_nSelectionType & SelectionType::DrawObject ) { eShellMode = ShellMode::Draw; m_pShell = new SwDrawShell( *this ); rDispatcher.Push( *m_pShell ); if ( m_nSelectionType & SelectionType::Ornament ) { eShellMode = ShellMode::Bezier; m_pShell = new SwBezierShell( *this ); rDispatcher.Push( *m_pShell ); } #if HAVE_FEATURE_AVMEDIA else if( m_nSelectionType & SelectionType::Media ) { eShellMode = ShellMode::Media; m_pShell = new SwMediaShell( *this ); rDispatcher.Push( *m_pShell ); } #endif if (m_nSelectionType & SelectionType::ExtrudedCustomShape) { eShellMode = ShellMode::ExtrudedCustomShape; m_pShell = new svx::ExtrusionBar(this); rDispatcher.Push( *m_pShell ); } if (m_nSelectionType & SelectionType::FontWork) { eShellMode = ShellMode::FontWork; m_pShell = new svx::FontworkBar(this); rDispatcher.Push( *m_pShell ); } } else if ( m_nSelectionType & SelectionType::DbForm ) { eShellMode = ShellMode::DrawForm; m_pShell = new SwDrawFormShell( *this ); rDispatcher.Push( *m_pShell ); } else if ( m_nSelectionType & SelectionType::DrawObjectEditMode ) { bSetExtInpCntxt = true; eShellMode = ShellMode::DrawText; rDispatcher.Push( *(new SwBaseShell( *this )) ); m_pShell = new SwDrawTextShell( *this ); rDispatcher.Push( *m_pShell ); } else if ( m_nSelectionType & SelectionType::PostIt ) { eShellMode = ShellMode::PostIt; m_pShell = new SwAnnotationShell( *this ); rDispatcher.Push( *m_pShell ); } else { bSetExtInpCntxt = true; eShellMode = ShellMode::Text; if ( m_nSelectionType & SelectionType::NumberList ) { eShellMode = ShellMode::ListText; m_pShell = new SwListShell( *this ); rDispatcher.Push( *m_pShell ); } m_pShell = new SwTextShell(*this); rDispatcher.Push( *m_pShell ); if ( m_nSelectionType & SelectionType::Table ) { eShellMode = eShellMode == ShellMode::ListText ? ShellMode::TableListText : ShellMode::TableText; m_pShell = new SwTableShell( *this ); rDispatcher.Push( *m_pShell ); } } if ( m_nSelectionType & SelectionType::FormControl ) rDispatcher.Push( *m_pFormShell ); m_pViewImpl->SetShellMode(eShellMode); ImpSetVerb( m_nSelectionType ); if( !GetDocShell()->IsReadOnly() ) { if( bSetExtInpCntxt && GetWrtShell().HasReadonlySel() ) bSetExtInpCntxt = false; InputContext aCntxt( GetEditWin().GetInputContext() ); aCntxt.SetOptions( bSetExtInpCntxt ? (aCntxt.GetOptions() | ( InputContextFlags::Text | InputContextFlags::ExtText )) : (aCntxt.GetOptions() & ~ InputContextFlags( InputContextFlags::Text | InputContextFlags::ExtText )) ); GetEditWin().SetInputContext( aCntxt ); } // Show Mail Merge toolbar initially for documents with Database fields if (!m_bInitOnceCompleted && GetWrtShell().IsAnyDatabaseFieldInDoc()) ShowUIElement("private:resource/toolbar/mailmerge"); // Activate the toolbar to the new selection which also was active last time. // Before a flush () must be, but does not affect the UI according to MBA and // is not a performance problem. // TODO/LATER: maybe now the Flush() command is superfluous?! rDispatcher.Flush(); Point aPnt = GetEditWin().OutputToScreenPixel(GetEditWin().GetPointerPosPixel()); aPnt = GetEditWin().PixelToLogic(aPnt); GetEditWin().UpdatePointer(aPnt); SdrView* pDView = GetWrtShell().GetDrawView(); if ( bInitFormShell && pDView ) m_pFormShell->SetView(dynamic_cast( pDView) ); } // Opportune time for the communication with OLE objects? if ( GetDocShell()->GetDoc()->IsOLEPrtNotifyPending() ) GetDocShell()->GetDoc()->PrtOLENotify( false ); // now the table-update if(bUpdateTable) m_pWrtShell->UpdateTable(); GetViewImpl()->GetUNOObject_Impl()->NotifySelChanged(); m_bInitOnceCompleted = true; } // Interaction: AttrChangedNotify() and TimeoutHdl. // No Update if actions are still open, since the cursor on the core side // can be somewhere in no man's land. // But since we can no longer supply status and we want instead lock // the dispatcher. extern "C" { static int lcl_CmpIds( const void *pFirst, const void *pSecond) { return *static_cast(pFirst) - *static_cast(pSecond); } } IMPL_LINK_NOARG(SwView, AttrChangedNotify, LinkParamNone*, void) { if ( GetEditWin().IsChainMode() ) GetEditWin().SetChainMode( false ); //Opt: Not if PaintLocked. During unlock a notify will be once more triggered. if( !m_pWrtShell->IsPaintLocked() && !g_bNoInterrupt && GetDocShell()->IsReadOnly() ) CheckReadonlyState(); if( !m_pWrtShell->IsPaintLocked() && !g_bNoInterrupt ) CheckReadonlySelection(); if( !m_bAttrChgNotified ) { if (m_pWrtShell->ActionPend() || g_bNoInterrupt || GetDispatcher().IsLocked() || //do not confuse the SFX GetViewFrame()->GetBindings().IsInUpdate() )//do not confuse the SFX { m_bAttrChgNotified = true; m_aTimer.Start(); const SfxPoolItem *pItem; if ( SfxItemState::SET != GetObjectShell()->GetMedium()->GetItemSet()-> GetItemState( SID_HIDDEN, false, &pItem ) || !static_cast(pItem)->GetValue() ) { GetViewFrame()->GetBindings().ENTERREGISTRATIONS(); m_bAttrChgNotifiedWithRegistrations = true; } } else SelectShell(); } // change ui if cursor is at a SwPostItField if (m_pPostItMgr) { // only perform the code that is needed to determine, if at the // actual cursor position is a post-it field m_pPostItMgr->SetShadowState( m_pWrtShell->GetPostItFieldAtCursor() ); } } IMPL_LINK_NOARG(SwView, TimeoutHdl, Timer *, void) { if (m_pWrtShell->ActionPend() || g_bNoInterrupt) { m_aTimer.Start(); return; } if ( m_bAttrChgNotifiedWithRegistrations ) { GetViewFrame()->GetBindings().LEAVEREGISTRATIONS(); m_bAttrChgNotifiedWithRegistrations = false; } CheckReadonlyState(); CheckReadonlySelection(); bool bOldUndo = m_pWrtShell->DoesUndo(); m_pWrtShell->DoUndo( false ); SelectShell(); m_pWrtShell->DoUndo( bOldUndo ); m_bAttrChgNotified = false; GetViewImpl()->GetUNOObject_Impl()->NotifySelChanged(); } void SwView::CheckReadonlyState() { SfxDispatcher &rDis = GetDispatcher(); // To be able to recognize if it is already disabled! SfxItemState eStateRO, eStateProtAll; const SfxPoolItem *pItem; // Query the status from a slot which is only known to us. // Otherwise the slot is known from other; like the BasicIde eStateRO = rDis.QueryState( FN_INSERT_BOOKMARK, pItem ); eStateProtAll = rDis.QueryState( FN_EDIT_REGION, pItem ); bool bChgd = false; if ( !m_pWrtShell->IsCursorReadonly() ) { static sal_uInt16 aROIds[] = { SID_DELETE, FN_BACKSPACE, FN_SHIFT_BACKSPACE, SID_UNDO, SID_REDO, SID_REPEAT, SID_PASTE, SID_PASTE_UNFORMATTED, FN_PASTE_NESTED_TABLE, FN_TABLE_PASTE_ROW_BEFORE, FN_TABLE_PASTE_COL_BEFORE, SID_PASTE_SPECIAL, SID_SBA_BRW_INSERT, SID_BACKGROUND_COLOR, FN_INSERT_BOOKMARK, SID_CHARMAP_CONTROL, SID_CHARMAP, SID_EMOJI_CONTROL, FN_INSERT_SOFT_HYPHEN, FN_INSERT_HARDHYPHEN, FN_INSERT_HARD_SPACE, FN_INSERT_NNBSP, FN_INSERT_BREAK, FN_INSERT_LINEBREAK, FN_INSERT_COLUMN_BREAK, FN_INSERT_BREAK_DLG, FN_DELETE_SENT, FN_DELETE_BACK_SENT, FN_DELETE_WORD, FN_DELETE_BACK_WORD, FN_DELETE_LINE, FN_DELETE_BACK_LINE, FN_DELETE_PARA, FN_DELETE_BACK_PARA, FN_DELETE_WHOLE_LINE, FN_CALCULATE, FN_FORMAT_RESET, FN_POSTIT, FN_JAVAEDIT, SID_ATTR_PARA_ADJUST_LEFT, SID_ATTR_PARA_ADJUST_RIGHT, SID_ATTR_PARA_ADJUST_CENTER,SID_ATTR_PARA_ADJUST_BLOCK, SID_ATTR_PARA_LINESPACE_10, SID_ATTR_PARA_LINESPACE_15, SID_ATTR_PARA_LINESPACE_20, SID_ATTR_CHAR_FONT, SID_ATTR_CHAR_FONTHEIGHT, SID_ATTR_CHAR_COLOR_BACKGROUND, SID_ATTR_CHAR_COLOR_BACKGROUND_EXT, SID_ATTR_CHAR_COLOR_EXT, SID_ATTR_CHAR_COLOR, SID_ATTR_CHAR_WEIGHT, SID_ATTR_CHAR_POSTURE, SID_ATTR_CHAR_OVERLINE, SID_ATTR_CHAR_UNDERLINE, SID_ATTR_FLASH, SID_ATTR_CHAR_STRIKEOUT, SID_ULINE_VAL_SINGLE, SID_ULINE_VAL_DOUBLE, SID_ULINE_VAL_DOTTED, SID_ATTR_CHAR_CONTOUR, SID_ATTR_CHAR_SHADOWED, SID_ATTR_CHAR_AUTOKERN, SID_ATTR_CHAR_ESCAPEMENT, FN_SET_SUPER_SCRIPT, FN_SET_SUB_SCRIPT, SID_ATTR_CHAR_CASEMAP, SID_ATTR_CHAR_LANGUAGE, SID_ATTR_CHAR_KERNING, SID_CHAR_DLG, SID_ATTR_CHAR_WORDLINEMODE, FN_GROW_FONT_SIZE, FN_SHRINK_FONT_SIZE, FN_TXTATR_INET, FN_FORMAT_DROPCAPS, SID_ATTR_PARA_ADJUST, SID_ATTR_PARA_LINESPACE, SID_ATTR_PARA_SPLIT, SID_ATTR_PARA_KEEP, SID_ATTR_PARA_WIDOWS, SID_ATTR_PARA_ORPHANS, SID_ATTR_PARA_MODEL, SID_PARA_DLG, FN_SELECT_PARA, SID_DEC_INDENT, SID_INC_INDENT }; static bool bFirst = true; if ( bFirst ) { qsort( static_cast(aROIds), SAL_N_ELEMENTS(aROIds), sizeof(sal_uInt16), lcl_CmpIds ); bFirst = false; } if ( SfxItemState::DISABLED == eStateRO ) { rDis.SetSlotFilter( SfxSlotFilterState::ENABLED_READONLY, aROIds ); bChgd = true; } } else if( m_pWrtShell->IsAllProtect() ) { if ( SfxItemState::DISABLED == eStateProtAll ) { static sal_uInt16 aAllProtIds[] = { SID_SAVEDOC, FN_EDIT_REGION }; static bool bAllProtFirst = true; if ( bAllProtFirst ) { qsort( static_cast(aAllProtIds), SAL_N_ELEMENTS(aAllProtIds), sizeof(sal_uInt16), lcl_CmpIds ); bAllProtFirst = false; } rDis.SetSlotFilter( SfxSlotFilterState::ENABLED_READONLY, aAllProtIds ); bChgd = true; } } else if ( SfxItemState::DISABLED != eStateRO || SfxItemState::DISABLED != eStateProtAll ) { bChgd = true; rDis.SetSlotFilter(); } if ( bChgd ) GetViewFrame()->GetBindings().InvalidateAll(true); } void SwView::CheckReadonlySelection() { SfxDisableFlags nDisableFlags = SfxDisableFlags::NONE; SfxDispatcher &rDis = GetDispatcher(); if( m_pWrtShell->HasReadonlySel() && ( !m_pWrtShell->GetDrawView() || !m_pWrtShell->GetDrawView()->GetMarkedObjectList().GetMarkCount() )) nDisableFlags |= SfxDisableFlags::SwOnProtectedCursor; if( (SfxDisableFlags::SwOnProtectedCursor & nDisableFlags ) != (SfxDisableFlags::SwOnProtectedCursor & rDis.GetDisableFlags() ) ) { // Additionally move at the Window the InputContext, so that // in japanese / chinese versions the external input will be // turned on or off. This but only if the correct shell is on // the stack. switch( m_pViewImpl->GetShellMode() ) { case ShellMode::Text: case ShellMode::ListText: case ShellMode::TableText: case ShellMode::TableListText: { // Temporary solution!!! Should set the font of the current insertion point // at each cursor movement, so outside of this "if". But TH does not // evaluates the font at this time and the "purchase" appears to me // as too expensive. // Moreover, we don't have a font, but only attributes from which the // text formatting and the correct font will be build together. InputContext aCntxt( GetEditWin().GetInputContext() ); aCntxt.SetOptions( SfxDisableFlags::SwOnProtectedCursor & nDisableFlags ? (aCntxt.GetOptions() & ~ InputContextFlags( InputContextFlags::Text | InputContextFlags::ExtText )) : (aCntxt.GetOptions() | ( InputContextFlags::Text | InputContextFlags::ExtText )) ); GetEditWin().SetInputContext( aCntxt ); } break; default: ; } } if( nDisableFlags != rDis.GetDisableFlags() ) { rDis.SetDisableFlags( nDisableFlags ); GetViewFrame()->GetBindings().InvalidateAll( true ); } } SwView::SwView( SfxViewFrame *_pFrame, SfxViewShell* pOldSh ) : SfxViewShell( _pFrame, SWVIEWFLAGS ), m_nNewPage(USHRT_MAX), m_nOldPageNum(0), m_pNumRuleNodeFromDoc(nullptr), m_pEditWin( VclPtr::Create( &_pFrame->GetWindow(), *this ) ), m_pShell(nullptr), m_pFormShell(nullptr), m_pHScrollbar(nullptr), m_pVScrollbar(nullptr), m_pScrollFill(VclPtr::Create( &_pFrame->GetWindow(), WB_SIZEABLE )), m_pVRuler(VclPtr::Create(&GetViewFrame()->GetWindow(), m_pEditWin, SvxRulerSupportFlags::TABS | SvxRulerSupportFlags::PARAGRAPH_MARGINS_VERTICAL| SvxRulerSupportFlags::BORDERS | SvxRulerSupportFlags::REDUCED_METRIC, GetViewFrame()->GetBindings(), WB_VSCROLL | WB_EXTRAFIELD | WB_BORDER )), m_pLastTableFormat(nullptr), m_pFormatClipboard(new SwFormatClipboard()), m_nSelectionType( SelectionType::All ), m_nPageCnt(0), m_nDrawSfxId( USHRT_MAX ), m_nFormSfxId( USHRT_MAX ), m_nLastPasteDestination( static_cast(0xFFFF) ), m_nLeftBorderDistance( 0 ), m_nRightBorderDistance( 0 ), m_eLastSearchCommand( static_cast(0xFFFF) ), m_bWheelScrollInProgress(false), m_bCenterCursor(false), m_bTopCursor(false), m_bTabColFromDoc(false), m_bTabRowFromDoc(false), m_bSetTabColFromDoc(false), m_bSetTabRowFromDoc(false), m_bAttrChgNotified(false), m_bAttrChgNotifiedWithRegistrations(false), m_bVerbsActive(false), m_bDrawRotate(false), m_bDrawSelMode(true), m_bShowAtResize(true), m_bInOuterResizePixel(false), m_bInInnerResizePixel(false), m_bPasteState(false), m_bPasteSpecialState(false), m_bInMailMerge(false), m_bInDtor(false), m_bOldShellWasPagePreview(false), m_bIsPreviewDoubleClick(false), m_bMakeSelectionVisible(false), m_nLOKPageUpDownOffset(0) { static bool bRequestDoubleBuffering = getenv("VCL_DOUBLEBUFFERING_ENABLE"); if (bRequestDoubleBuffering) m_pEditWin->RequestDoubleBuffering(true); // According to discussion with MBA and further // investigations, no old SfxViewShell will be set as parameter , // if function "New Window" is performed to open an additional view beside // an already existing one. // If the view is switch from one to another, the 'old' view is given by // parameter . bDocSzUpdated = true; CreateScrollbar( true ); CreateScrollbar( false ); m_pViewImpl.reset(new SwView_Impl(this)); SetName("View"); SetWindow( m_pEditWin ); m_aTimer.SetTimeout( 120 ); SwDocShell& rDocSh = dynamic_cast(*_pFrame->GetObjectShell()); bool bOldModifyFlag = rDocSh.IsEnableSetModified(); if (bOldModifyFlag) rDocSh.EnableSetModified( false ); // HACK: SwDocShell has some cached font info, VCL informs about font updates, // but loading of docs with embedded fonts happens after SwDocShell is created // but before SwEditWin (which handles the VCL event) is created. So update // manually. if (rDocSh.GetDoc()->getIDocumentSettingAccess().get( DocumentSettingId::EMBED_FONTS )) rDocSh.UpdateFontList(); bool bWebDShell = dynamic_cast(&rDocSh) != nullptr; const SwMasterUsrPref *pUsrPref = SW_MOD()->GetUsrPref(bWebDShell); SwViewOption aUsrPref( *pUsrPref); //! get lingu options without loading lingu DLL SvtLinguOptions aLinguOpt; SvtLinguConfig().GetOptions( aLinguOpt ); aUsrPref.SetOnlineSpell( aLinguOpt.bIsSpellAuto ); bool bOldShellWasSrcView = false; // determine if there is an existing view for // document SfxViewShell* pExistingSh = nullptr; if ( pOldSh ) { pExistingSh = pOldSh; // determine type of existing view if (SwPagePreview* pPagePreview = dynamic_cast(pExistingSh)) { m_sSwViewData = pPagePreview->GetPrevSwViewData(); m_sNewCursorPos = pPagePreview->GetNewCursorPos(); m_nNewPage = pPagePreview->GetNewPage(); m_bOldShellWasPagePreview = true; m_bIsPreviewDoubleClick = !m_sNewCursorPos.isEmpty() || m_nNewPage != USHRT_MAX; } else if (dynamic_cast(pExistingSh) != nullptr) bOldShellWasSrcView = true; } SAL_INFO( "sw.ui", "before create WrtShell" ); if (SwView *pView = dynamic_cast(pExistingSh)) { m_pWrtShell.reset(new SwWrtShell(*pView->m_pWrtShell, m_pEditWin, *this)); } else if (SwWrtShell *pWrtShell = dynamic_cast(rDocSh.GetDoc()->getIDocumentLayoutAccess().GetCurrentViewShell())) { m_pWrtShell.reset(new SwWrtShell(*pWrtShell, m_pEditWin, *this)); } else { SwDoc& rDoc = *rDocSh.GetDoc(); if( !bOldShellWasSrcView && bWebDShell && !m_bOldShellWasPagePreview ) aUsrPref.setBrowseMode( true ); else aUsrPref.setBrowseMode( rDoc.getIDocumentSettingAccess().get(DocumentSettingId::BROWSE_MODE) ); //For the BrowseMode we do not assume a factor. if( aUsrPref.getBrowseMode() && aUsrPref.GetZoomType() != SvxZoomType::PERCENT ) { aUsrPref.SetZoomType( SvxZoomType::PERCENT ); aUsrPref.SetZoom( 100 ); } if (rDocSh.IsPreview()) { aUsrPref.SetZoomType( SvxZoomType::WHOLEPAGE ); aUsrPref.SetViewLayoutBookMode( false ); aUsrPref.SetViewLayoutColumns( 1 ); } m_pWrtShell.reset(new SwWrtShell(rDoc, m_pEditWin, *this, &aUsrPref)); // creating an SwView from a SwPagePreview needs to // add the SwViewShell to the ring of the other SwViewShell(s) if(m_bOldShellWasPagePreview) { SwViewShell& rPreviewViewShell = *static_cast(pExistingSh)->GetViewShell(); m_pWrtShell->MoveTo(&rPreviewViewShell); // to update the field command et.al. if necessary const SwViewOption* pPreviewOpt = rPreviewViewShell.GetViewOptions(); if( pPreviewOpt->IsFieldName() != aUsrPref.IsFieldName() || pPreviewOpt->IsShowHiddenField() != aUsrPref.IsShowHiddenField() || pPreviewOpt->IsShowHiddenPara() != aUsrPref.IsShowHiddenPara() || pPreviewOpt->IsShowHiddenChar() != aUsrPref.IsShowHiddenChar() ) rPreviewViewShell.ApplyViewOptions(aUsrPref); // reset design mode at draw view for form // shell, if needed. if ( static_cast(pExistingSh)->ResetFormDesignMode() && m_pWrtShell->HasDrawView() ) { SdrView* pDrawView = m_pWrtShell->GetDrawView(); pDrawView->SetDesignMode( static_cast(pExistingSh)->FormDesignModeToReset() ); } } } SAL_INFO( "sw.ui", "after create WrtShell" ); m_pHRuler = VclPtr::Create(m_pWrtShell.get(), &GetViewFrame()->GetWindow(), m_pEditWin, SvxRulerSupportFlags::TABS | SvxRulerSupportFlags::PARAGRAPH_MARGINS | SvxRulerSupportFlags::BORDERS | SvxRulerSupportFlags::NEGATIVE_MARGINS| SvxRulerSupportFlags::REDUCED_METRIC, GetViewFrame()->GetBindings(), WB_STDRULER | WB_EXTRAFIELD | WB_BORDER); // assure that modified state of document // isn't reset, if document is already modified. const bool bIsDocModified = m_pWrtShell->GetDoc()->getIDocumentState().IsModified(); // Thus among other things, the HRuler is not displayed in the read-only case. aUsrPref.SetReadonly( m_pWrtShell->GetViewOptions()->IsReadonly() ); // no margin for OLE! Size aBrwsBorder; if( SfxObjectCreateMode::EMBEDDED != rDocSh.GetCreateMode() ) aBrwsBorder = GetMargin(); m_pWrtShell->SetBrowseBorder( aBrwsBorder ); // In CTOR no shell changes may take place, which must be temporarily stored // with the timer. Otherwise, the SFX removes them from the stack! bool bOld = g_bNoInterrupt; g_bNoInterrupt = true; m_pHRuler->SetActive(); m_pVRuler->SetActive(); SfxViewFrame* pViewFrame = GetViewFrame(); StartListening(*pViewFrame, DuplicateHandling::Prevent); StartListening(rDocSh, DuplicateHandling::Prevent); // Set Zoom-factor from HRuler Fraction aZoomFract( aUsrPref.GetZoom(), 100 ); m_pHRuler->SetZoom( aZoomFract ); m_pVRuler->SetZoom( aZoomFract ); m_pHRuler->SetDoubleClickHdl(LINK( this, SwView, ExecRulerClick )); FieldUnit eMetric = pUsrPref->GetHScrollMetric(); m_pHRuler->SetUnit( eMetric ); eMetric = pUsrPref->GetVScrollMetric(); m_pVRuler->SetUnit( eMetric ); m_pHRuler->SetCharWidth( 371 ); // default character width m_pVRuler->SetLineHeight( 551 ); // default line height // Set DocShell m_xGlueDocShell.reset(new SwViewGlueDocShell(*this, rDocSh)); m_pPostItMgr.reset(new SwPostItMgr(this)); // Check and process the DocSize. Via the handler, the shell could not // be found, because the shell is not known in the SFX management // within the CTOR phase. DocSzChgd( m_pWrtShell->GetDocSize() ); // Set AttrChangedNotify link m_pWrtShell->SetChgLnk(LINK(this, SwView, AttrChangedNotify)); if (rDocSh.GetCreateMode() == SfxObjectCreateMode::EMBEDDED && !rDocSh.GetVisArea(ASPECT_CONTENT).IsEmpty()) SetVisArea(rDocSh.GetVisArea(ASPECT_CONTENT),false); SAL_WARN_IF( officecfg::Office::Common::Undo::Steps::get() <= 0, "sw.ui", "/org.openoffice.Office.Common/Undo/Steps <= 0"); if (!utl::ConfigManager::IsFuzzing() && 0 < officecfg::Office::Common::Undo::Steps::get()) { m_pWrtShell->DoUndo(); } const bool bBrowse = m_pWrtShell->GetViewOptions()->getBrowseMode(); // Disable "multiple window" SetNewWindowAllowed(!bBrowse); // End of disabled multiple window m_bVScrollbarEnabled = aUsrPref.IsViewVScrollBar(); m_bHScrollbarEnabled = aUsrPref.IsViewHScrollBar(); m_pHScrollbar->SetAuto(bBrowse); if( aUsrPref.IsViewHRuler() ) CreateTab(); if( aUsrPref.IsViewVRuler() ) CreateVRuler(); m_pWrtShell->SetUIOptions( aUsrPref ); m_pWrtShell->SetReadOnlyAvailable( aUsrPref.IsCursorInProtectedArea() ); m_pWrtShell->ApplyAccessibilityOptions(SW_MOD()->GetAccessibilityOptions()); if( m_pWrtShell->GetDoc()->getIDocumentState().IsUpdateExpField() ) { if (m_pWrtShell->GetDoc()->GetDocumentFieldsManager().containsUpdatableFields()) { SET_CURR_SHELL(m_pWrtShell.get()); m_pWrtShell->StartAction(); m_pWrtShell->CalcLayout(); m_pWrtShell->GetDoc()->getIDocumentFieldsAccess().UpdateFields(false); m_pWrtShell->EndAction(); } m_pWrtShell->GetDoc()->getIDocumentState().SetUpdateExpFieldStat( false ); } // Update all tables if necessary: if( m_pWrtShell->GetDoc()->IsUpdateTOX() ) { SfxRequest aSfxRequest( FN_UPDATE_TOX, SfxCallMode::SLOT, GetPool() ); Execute( aSfxRequest ); m_pWrtShell->GetDoc()->SetUpdateTOX( false ); // reset again m_pWrtShell->SttEndDoc(true); } // No ResetModified, if there is already a view to this doc. SfxViewFrame* pVFrame = GetViewFrame(); SfxViewFrame* pFirst = SfxViewFrame::GetFirst(&rDocSh); // Currently(360) the view is registered firstly after the CTOR, // the following expression is also working if this changes. // If the modification cannot be canceled by undo, then do NOT set // the modify back. // no reset of modified state, if document // was already modified. if (!m_pWrtShell->GetDoc()->GetIDocumentUndoRedo().IsUndoNoResetModified() && ( !pFirst || pFirst == pVFrame ) && !bIsDocModified ) { m_pWrtShell->ResetModified(); } g_bNoInterrupt = bOld; // If a new GlobalDoc will be created, the navigator will also be generated. if( dynamic_cast(&rDocSh) != nullptr && !pVFrame->GetChildWindow( SID_NAVIGATOR )) { SfxBoolItem aNavi(SID_NAVIGATOR, true); GetDispatcher().ExecuteList(SID_NAVIGATOR, SfxCallMode::ASYNCHRON, { &aNavi }); } uno::Reference< frame::XFrame > xFrame = pVFrame->GetFrame().GetFrameInterface(); uno::Reference< frame::XFrame > xBeamerFrame = xFrame->findFrame( "_beamer", frame::FrameSearchFlag::CHILDREN); if(xBeamerFrame.is()) { SwDBData aData = m_pWrtShell->GetDBData(); SwModule::ShowDBObj( *this, aData ); } // has anybody calls the attrchanged handler in the constructor? if( m_bAttrChgNotifiedWithRegistrations ) { GetViewFrame()->GetBindings().LEAVEREGISTRATIONS(); if( m_aTimer.IsActive() ) m_aTimer.Stop(); } m_aTimer.SetInvokeHandler(LINK(this, SwView, TimeoutHdl)); m_aTimer.SetDebugName( "sw::SwView m_aTimer" ); m_bAttrChgNotified = m_bAttrChgNotifiedWithRegistrations = false; if (bOldModifyFlag) rDocSh.EnableSetModified(); InvalidateBorder(); if( !m_pHScrollbar->IsVisible( true ) ) ShowHScrollbar( false ); if( !m_pVScrollbar->IsVisible( true ) ) ShowVScrollbar( false ); GetViewFrame()->GetWindow().AddChildEventListener( LINK( this, SwView, WindowChildEventListener ) ); } SwViewGlueDocShell::SwViewGlueDocShell(SwView& rView, SwDocShell& rDocSh) : m_rView(rView) { // Set DocShell rDocSh.SetView(&m_rView); SW_MOD()->SetView(&m_rView); } SwViewGlueDocShell::~SwViewGlueDocShell() { SwDocShell* pDocSh = m_rView.GetDocShell(); if (pDocSh && pDocSh->GetView() == &m_rView) pDocSh->SetView(nullptr); if (SW_MOD()->GetView() == &m_rView) SW_MOD()->SetView(nullptr); } SwView::~SwView() { // Notify other LOK views that we are going away. SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_VIEW_CURSOR_VISIBLE, "visible", "false"); SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_TEXT_VIEW_SELECTION, "selection", ""); SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_GRAPHIC_VIEW_SELECTION, "selection", "EMPTY"); // Need to remove activated field's button before disposing EditWin. GetWrtShell().getIDocumentMarkAccess()->ClearFieldActivation(); GetViewFrame()->GetWindow().RemoveChildEventListener( LINK( this, SwView, WindowChildEventListener ) ); m_pPostItMgr.reset(); m_bInDtor = true; m_pEditWin->Hide(); // prevent problems with painting // Set pointer in SwDocShell to the view again m_xGlueDocShell.reset(); if( m_aTimer.IsActive() && m_bAttrChgNotifiedWithRegistrations ) GetViewFrame()->GetBindings().LEAVEREGISTRATIONS(); // the last view must end the text edit SdrView *pSdrView = m_pWrtShell ? m_pWrtShell->GetDrawView() : nullptr; if( pSdrView && pSdrView->IsTextEdit() ) pSdrView->SdrEndTextEdit( true ); SetWindow( nullptr ); m_pViewImpl->Invalidate(); EndListening(*GetViewFrame()); EndListening(*GetDocShell()); m_pScrollFill.disposeAndClear(); m_pWrtShell.reset(); // reset here so that it is not accessible by the following dtors. m_pHScrollbar.disposeAndClear(); m_pVScrollbar.disposeAndClear(); m_pHRuler.disposeAndClear(); m_pVRuler.disposeAndClear(); m_pGlosHdl.reset(); m_pViewImpl.reset(); // If this was enabled in the ctor for the frame, then disable it here. static bool bRequestDoubleBuffering = getenv("VCL_DOUBLEBUFFERING_ENABLE"); if (bRequestDoubleBuffering) m_pEditWin->RequestDoubleBuffering(false); m_pEditWin.disposeAndClear(); m_pFormatClipboard.reset(); } SwDocShell* SwView::GetDocShell() { SfxObjectShell* pDocShell = GetViewFrame()->GetObjectShell(); return dynamic_cast( pDocShell ); } // Remember CursorPos void SwView::WriteUserData( OUString &rUserData, bool bBrowse ) { // The browse flag will be passed from Sfx when documents are browsed // (not to be confused with the BrowseMode). // Then that stored data are not persistent! const SwRect& rRect = m_pWrtShell->GetCharRect(); const tools::Rectangle& rVis = GetVisArea(); rUserData = OUString::number( rRect.Left() ); rUserData += ";"; rUserData += OUString::number( rRect.Top() ); rUserData += ";"; rUserData += OUString::number( m_pWrtShell->GetViewOptions()->GetZoom() ); rUserData += ";"; rUserData += OUString::number( rVis.Left() ); rUserData += ";"; rUserData += OUString::number( rVis.Top() ); rUserData += ";"; rUserData += OUString::number( bBrowse ? SAL_MIN_INT32 : rVis.Right()); rUserData += ";"; rUserData += OUString::number( bBrowse ? SAL_MIN_INT32 : rVis.Bottom()); rUserData += ";"; rUserData += OUString::number( static_cast(m_pWrtShell->GetViewOptions()->GetZoomType()));//eZoom; rUserData += ";"; rUserData += FrameTypeFlags::NONE == m_pWrtShell->GetSelFrameType() ? OUStringLiteral("0") : OUStringLiteral("1"); } // Set CursorPos static bool lcl_IsOwnDocument( SwView& rView ) { uno::Reference xDPS( rView.GetDocShell()->GetModel(), uno::UNO_QUERY_THROW); uno::Reference xDocProps = xDPS->getDocumentProperties(); OUString Created = xDocProps->getAuthor(); OUString Changed = xDocProps->getModifiedBy(); OUString FullName = SW_MOD()->GetUserOptions().GetFullName(); return (!FullName.isEmpty() && (!Changed.isEmpty() && Changed == FullName )) || (Changed.isEmpty() && !Created.isEmpty() && Created == FullName ); } void SwView::ReadUserData( const OUString &rUserData, bool bBrowse ) { if ( rUserData.indexOf(';')>=0 && // more than one token // For document without layout only in the onlinelayout or // while forward/backward (!m_pWrtShell->IsNewLayout() || m_pWrtShell->GetViewOptions()->getBrowseMode() || bBrowse) ) { bool bIsOwnDocument = lcl_IsOwnDocument( *this ); SET_CURR_SHELL(m_pWrtShell.get()); sal_Int32 nPos = 0; // No it is *not* a good idea to call GetToken within Point constr. immediately, // because which parameter is evaluated first? long nX = rUserData.getToken( 0, ';', nPos ).toInt32(), nY = rUserData.getToken( 0, ';', nPos ).toInt32(); Point aCursorPos( nX, nY ); sal_uInt16 nZoomFactor = static_cast< sal_uInt16 >( rUserData.getToken(0, ';', nPos ).toInt32() ); long nLeft = rUserData.getToken(0, ';', nPos ).toInt32(), nTop = rUserData.getToken(0, ';', nPos ).toInt32(), nRight = rUserData.getToken(0, ';', nPos ).toInt32(), nBottom= rUserData.getToken(0, ';', nPos ).toInt32(); const long nAdd = m_pWrtShell->GetViewOptions()->getBrowseMode() ? DOCUMENTBORDER : DOCUMENTBORDER*2; if ( nBottom <= (m_pWrtShell->GetDocSize().Height()+nAdd) ) { m_pWrtShell->EnableSmooth( false ); const tools::Rectangle aVis( nLeft, nTop, nRight, nBottom ); sal_Int32 nOff = 0; SvxZoomType eZoom; if( !m_pWrtShell->GetViewOptions()->getBrowseMode() ) eZoom = static_cast(static_cast(rUserData.getToken(nOff, ';', nPos ).toInt32())); else { eZoom = SvxZoomType::PERCENT; ++nOff; } bool bSelectObj = (0 != rUserData.getToken( nOff, ';', nPos ).toInt32()) && m_pWrtShell->IsObjSelectable( aCursorPos ); // restore editing position m_pViewImpl->SetRestorePosition(aCursorPos, bSelectObj); // set flag value to avoid macro execution. bool bSavedFlagValue = m_pWrtShell->IsMacroExecAllowed(); m_pWrtShell->SetMacroExecAllowed( false ); // os: changed: The user data has to be read if the view is switched back from page preview // go to the last editing position when opening own files if(m_bOldShellWasPagePreview || bIsOwnDocument) { m_pWrtShell->SwCursorShell::SetCursor( aCursorPos, !bSelectObj ); if( bSelectObj ) { m_pWrtShell->SelectObj( aCursorPos ); m_pWrtShell->EnterSelFrameMode( &aCursorPos ); } } // reset flag value m_pWrtShell->SetMacroExecAllowed( bSavedFlagValue ); // set visible area before applying // information from print preview. Otherwise, the applied information // is lost. // os: changed: The user data has to be read if the view is switched back from page preview // go to the last editing position when opening own files if(m_bOldShellWasPagePreview || bIsOwnDocument ) { if ( bBrowse ) SetVisArea( aVis.TopLeft() ); else SetVisArea( aVis ); } //apply information from print preview - if available if( !m_sNewCursorPos.isEmpty() ) { sal_Int32 nIdx{ 0 }; const long nXTmp = m_sNewCursorPos.getToken( 0, ';', nIdx ).toInt32(); const long nYTmp = m_sNewCursorPos.getToken( 0, ';', nIdx ).toInt32(); Point aCursorPos2( nXTmp, nYTmp ); bSelectObj = m_pWrtShell->IsObjSelectable( aCursorPos2 ); m_pWrtShell->SwCursorShell::SetCursor( aCursorPos2 ); if( bSelectObj ) { m_pWrtShell->SelectObj( aCursorPos2 ); m_pWrtShell->EnterSelFrameMode( &aCursorPos2 ); } m_pWrtShell->MakeSelVisible(); m_sNewCursorPos.clear(); } else if(USHRT_MAX != m_nNewPage) { m_pWrtShell->GotoPage(m_nNewPage, true); m_nNewPage = USHRT_MAX; } SelectShell(); m_pWrtShell->StartAction(); const SwViewOption* pVOpt = m_pWrtShell->GetViewOptions(); if( pVOpt->GetZoom() != nZoomFactor || pVOpt->GetZoomType() != eZoom ) SetZoom( eZoom, nZoomFactor); m_pWrtShell->LockView( true ); m_pWrtShell->EndAction(); m_pWrtShell->LockView( false ); m_pWrtShell->EnableSmooth( true ); } } } void SwView::ReadUserDataSequence ( const uno::Sequence < beans::PropertyValue >& rSequence ) { if(GetDocShell()->IsPreview()||m_bIsPreviewDoubleClick) return; bool bIsOwnDocument = lcl_IsOwnDocument( *this ); if (!rSequence.hasElements()) return; SET_CURR_SHELL(m_pWrtShell.get()); const SwRect& rRect = m_pWrtShell->GetCharRect(); const tools::Rectangle &rVis = GetVisArea(); const SwViewOption* pVOpt = m_pWrtShell->GetViewOptions(); sal_Int64 nX = rRect.Left(), nY = rRect.Top(), nLeft = rVis.Left(), nTop = rVis.Top(); sal_Int64 nRight = nLeft; sal_Int64 nBottom = LONG_MIN; sal_Int16 nZoomType = static_cast< sal_Int16 >(pVOpt->GetZoomType()); sal_Int16 nZoomFactor = static_cast < sal_Int16 > (pVOpt->GetZoom()); bool bViewLayoutBookMode = pVOpt->IsViewLayoutBookMode(); sal_Int16 nViewLayoutColumns = pVOpt->GetViewLayoutColumns(); bool bSelectedFrame = ( m_pWrtShell->GetSelFrameType() != FrameTypeFlags::NONE ), bGotVisibleLeft = false, bGotVisibleTop = false, bGotVisibleRight = false, bGotVisibleBottom = false, bGotZoomType = false, bGotZoomFactor = false, bGotIsSelectedFrame = false, bGotViewLayoutColumns = false, bGotViewLayoutBookMode = false, bBrowseMode = false, bGotBrowseMode = false; for (const beans::PropertyValue& rValue : rSequence) { if ( rValue.Name == "ViewLeft" ) { rValue.Value >>= nX; nX = convertMm100ToTwip( nX ); } else if ( rValue.Name == "ViewTop" ) { rValue.Value >>= nY; nY = convertMm100ToTwip( nY ); } else if ( rValue.Name == "VisibleLeft" ) { rValue.Value >>= nLeft; nLeft = convertMm100ToTwip( nLeft ); bGotVisibleLeft = true; } else if ( rValue.Name == "VisibleTop" ) { rValue.Value >>= nTop; nTop = convertMm100ToTwip( nTop ); bGotVisibleTop = true; } else if ( rValue.Name == "VisibleRight" ) { rValue.Value >>= nRight; nRight = convertMm100ToTwip( nRight ); bGotVisibleRight = true; } else if ( rValue.Name == "VisibleBottom" ) { rValue.Value >>= nBottom; nBottom = convertMm100ToTwip( nBottom ); bGotVisibleBottom = true; } else if ( rValue.Name == "ZoomType" ) { rValue.Value >>= nZoomType; bGotZoomType = true; } else if ( rValue.Name == "ZoomFactor" ) { rValue.Value >>= nZoomFactor; bGotZoomFactor = true; } else if ( rValue.Name == "ViewLayoutColumns" ) { rValue.Value >>= nViewLayoutColumns; bGotViewLayoutColumns = true; } else if ( rValue.Name == "ViewLayoutBookMode" ) { bViewLayoutBookMode = *o3tl::doAccess(rValue.Value); bGotViewLayoutBookMode = true; } else if ( rValue.Name == "IsSelectedFrame" ) { rValue.Value >>= bSelectedFrame; bGotIsSelectedFrame = true; } else if (rValue.Name == "ShowOnlineLayout") { rValue.Value >>= bBrowseMode; bGotBrowseMode = true; } // Fallback to common SdrModel processing else GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel()->ReadUserDataSequenceValue(&rValue); } if (bGotBrowseMode) { // delegate further GetViewImpl()->GetUNOObject_Impl()->getViewSettings()->setPropertyValue("ShowOnlineLayout", uno::Any(bBrowseMode)); } if (bGotVisibleBottom) { Point aCursorPos( nX, nY ); const long nAdd = m_pWrtShell->GetViewOptions()->getBrowseMode() ? DOCUMENTBORDER : DOCUMENTBORDER*2; if (nBottom <= (m_pWrtShell->GetDocSize().Height()+nAdd) ) { m_pWrtShell->EnableSmooth( false ); const tools::Rectangle aVis( nLeft, nTop, nRight, nBottom ); SvxZoomType eZoom; if ( !m_pWrtShell->GetViewOptions()->getBrowseMode() ) eZoom = static_cast < SvxZoomType > ( nZoomType ); else { eZoom = SvxZoomType::PERCENT; } if (bGotIsSelectedFrame) { bool bSelectObj = bSelectedFrame && m_pWrtShell->IsObjSelectable( aCursorPos ); // set flag value to avoid macro execution. bool bSavedFlagValue = m_pWrtShell->IsMacroExecAllowed(); m_pWrtShell->SetMacroExecAllowed( false ); // os: changed: The user data has to be read if the view is switched back from page preview // go to the last editing position when opening own files m_pViewImpl->SetRestorePosition(aCursorPos, bSelectObj); if(m_bOldShellWasPagePreview|| bIsOwnDocument) { m_pWrtShell->SwCursorShell::SetCursor( aCursorPos, !bSelectObj ); // Update the shell to toggle Header/Footer edit if needed bool bInHeader = true; if ( m_pWrtShell->IsInHeaderFooter( &bInHeader ) ) { if ( !bInHeader ) { m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Footer, true ); m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Header, false ); } else { m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Header, true ); m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Footer, false ); } // Force repaint m_pWrtShell->GetWin()->Invalidate(); } if ( m_pWrtShell->IsInHeaderFooter() != m_pWrtShell->IsHeaderFooterEdit() ) m_pWrtShell->ToggleHeaderFooterEdit(); if( bSelectObj ) { m_pWrtShell->SelectObj( aCursorPos ); m_pWrtShell->EnterSelFrameMode( &aCursorPos ); } } // reset flag value m_pWrtShell->SetMacroExecAllowed( bSavedFlagValue ); } SelectShell(); // Set ViewLayoutSettings const bool bSetViewLayoutSettings = bGotViewLayoutColumns && bGotViewLayoutBookMode && ( pVOpt->GetViewLayoutColumns() != nViewLayoutColumns || pVOpt->IsViewLayoutBookMode() != bViewLayoutBookMode ); const bool bSetViewSettings = bGotZoomType && bGotZoomFactor && ( pVOpt->GetZoom() != nZoomFactor || pVOpt->GetZoomType() != eZoom ); // In case we have a 'fixed' view layout of 2 or more columns, // we have to apply the view options *before* starting the action. // Otherwise the SetZoom function cannot work correctly, because // the view layout hasn't been calculated. const bool bZoomNeedsViewLayout = bSetViewLayoutSettings && 1 < nViewLayoutColumns && bSetViewSettings && eZoom != SvxZoomType::PERCENT; if ( !bZoomNeedsViewLayout ) m_pWrtShell->StartAction(); if ( bSetViewLayoutSettings ) SetViewLayout( nViewLayoutColumns, bViewLayoutBookMode, true ); if ( bZoomNeedsViewLayout ) m_pWrtShell->StartAction(); if ( bSetViewSettings ) SetZoom( eZoom, nZoomFactor, true ); // os: changed: The user data has to be read if the view is switched back from page preview // go to the last editing position when opening own files if(m_bOldShellWasPagePreview||bIsOwnDocument) { if ( bGotVisibleLeft && bGotVisibleTop ) { Point aTopLeft(aVis.TopLeft()); // make sure the document is still centered const SwTwips lBorder = IsDocumentBorder() ? DOCUMENTBORDER : 2 * DOCUMENTBORDER; SwTwips nEditWidth = GetEditWin().GetOutputSize().Width(); if(nEditWidth > (m_aDocSz.Width() + lBorder )) aTopLeft.setX( ( m_aDocSz.Width() + lBorder - nEditWidth ) / 2 ); else { //check if the values are possible long nXMax = m_pHScrollbar->GetRangeMax() - m_pHScrollbar->GetVisibleSize(); if( aTopLeft.X() > nXMax ) aTopLeft.setX( nXMax < 0 ? 0 : nXMax ); } SetVisArea( aTopLeft ); } else if (bGotVisibleLeft && bGotVisibleTop && bGotVisibleRight && bGotVisibleBottom ) SetVisArea( aVis ); } m_pWrtShell->LockView( true ); m_pWrtShell->EndAction(); m_pWrtShell->LockView( false ); m_pWrtShell->EnableSmooth( true ); } } } void SwView::WriteUserDataSequence ( uno::Sequence < beans::PropertyValue >& rSequence ) { const SwRect& rRect = m_pWrtShell->GetCharRect(); const tools::Rectangle& rVis = GetVisArea(); std::vector aVector; sal_uInt16 nViewID( GetViewFrame()->GetCurViewId()); aVector.push_back(comphelper::makePropertyValue("ViewId", "view" + OUString::number(nViewID))); aVector.push_back(comphelper::makePropertyValue("ViewLeft", convertTwipToMm100 ( rRect.Left() ))); aVector.push_back(comphelper::makePropertyValue("ViewTop", convertTwipToMm100 ( rRect.Top() ))); auto visibleLeft = convertTwipToMm100 ( rVis.Left() ); aVector.push_back(comphelper::makePropertyValue("VisibleLeft", visibleLeft)); auto visibleTop = convertTwipToMm100 ( rVis.Top() ); aVector.push_back(comphelper::makePropertyValue("VisibleTop", visibleTop)); auto visibleRight = rVis.IsWidthEmpty() ? visibleLeft : convertTwipToMm100 ( rVis.Right() ); aVector.push_back(comphelper::makePropertyValue("VisibleRight", visibleRight)); auto visibleBottom = rVis.IsHeightEmpty() ? visibleTop : convertTwipToMm100 ( rVis.Bottom() ); aVector.push_back(comphelper::makePropertyValue("VisibleBottom", visibleBottom)); const sal_Int16 nZoomType = static_cast< sal_Int16 >(m_pWrtShell->GetViewOptions()->GetZoomType()); aVector.push_back(comphelper::makePropertyValue("ZoomType", nZoomType)); const sal_Int16 nViewLayoutColumns = static_cast< sal_Int16 >(m_pWrtShell->GetViewOptions()->GetViewLayoutColumns()); aVector.push_back(comphelper::makePropertyValue("ViewLayoutColumns", nViewLayoutColumns)); aVector.push_back(comphelper::makePropertyValue("ViewLayoutBookMode", m_pWrtShell->GetViewOptions()->IsViewLayoutBookMode())); aVector.push_back(comphelper::makePropertyValue("ZoomFactor", static_cast < sal_Int16 > (m_pWrtShell->GetViewOptions()->GetZoom()))); aVector.push_back(comphelper::makePropertyValue("IsSelectedFrame", FrameTypeFlags::NONE != m_pWrtShell->GetSelFrameType())); rSequence = comphelper::containerToSequence(aVector); // Common SdrModel processing GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel()->WriteUserDataSequence(rSequence); } void SwView::ShowCursor( bool bOn ) { //don't scroll the cursor into the visible area bool bUnlockView = !m_pWrtShell->IsViewLocked(); m_pWrtShell->LockView( true ); //lock visible section if( !bOn ) m_pWrtShell->HideCursor(); else if( !m_pWrtShell->IsFrameSelected() && !m_pWrtShell->IsObjSelected() ) m_pWrtShell->ShowCursor(); if( bUnlockView ) m_pWrtShell->LockView( false ); } ErrCode SwView::DoVerb( long nVerb ) { if ( !GetViewFrame()->GetFrame().IsInPlace() ) { SwWrtShell &rSh = GetWrtShell(); const SelectionType nSel = rSh.GetSelectionType(); if ( nSel & SelectionType::Ole ) rSh.LaunchOLEObj( nVerb ); } return ERRCODE_NONE; } // only return true for a text selection bool SwView::HasSelection( bool bText ) const { return bText ? GetWrtShell().SwCursorShell::HasSelection() : GetWrtShell().HasSelection(); } OUString SwView::GetSelectionText( bool bCompleteWrds ) { return GetSelectionTextParam( bCompleteWrds, true ); } OUString SwView::GetSelectionTextParam( bool bCompleteWrds, bool bEraseTrail ) { OUString sReturn; if( bCompleteWrds && !GetWrtShell().HasSelection() ) GetWrtShell().SelWrd(); GetWrtShell().GetSelectedText( sReturn ); if( bEraseTrail ) sReturn = comphelper::string::stripEnd(sReturn, ' '); return sReturn; } SwGlossaryHdl* SwView::GetGlosHdl() { if(!m_pGlosHdl) m_pGlosHdl.reset(new SwGlossaryHdl(GetViewFrame(), m_pWrtShell.get())); return m_pGlosHdl.get(); } void SwView::Notify( SfxBroadcaster& rBC, const SfxHint& rHint ) { bool bCallBase = true; if(dynamic_cast(&rHint)) { bool bDesignMode = static_cast(rHint).GetDesignMode(); if (!bDesignMode && GetDrawFuncPtr()) { GetDrawFuncPtr()->Deactivate(); SetDrawFuncPtr(nullptr); LeaveDrawCreate(); AttrChangedNotify(nullptr); } } else { SfxHintId nId = rHint.GetId(); switch ( nId ) { // sub shells will be destroyed by the // dispatcher, if the view frame is dying. Thus, reset member . case SfxHintId::Dying: { if ( &rBC == GetViewFrame() ) { ResetSubShell(); } } break; case SfxHintId::ModeChanged: { // Modal mode change-over? bool bModal = GetDocShell()->IsInModalMode(); m_pHRuler->SetActive( !bModal ); m_pVRuler->SetActive( !bModal ); } [[fallthrough]]; case SfxHintId::TitleChanged: if ( GetDocShell()->IsReadOnly() != GetWrtShell().GetViewOptions()->IsReadonly() ) { SwWrtShell &rSh = GetWrtShell(); rSh.SetReadonlyOption( GetDocShell()->IsReadOnly() ); if ( rSh.GetViewOptions()->IsViewVRuler() ) CreateVRuler(); else KillVRuler(); if ( rSh.GetViewOptions()->IsViewHRuler() ) CreateTab(); else KillTab(); bool bReadonly = GetDocShell()->IsReadOnly(); // if document is to be opened in alive-mode then this has to be // regarded while switching from readonly-mode to edit-mode if( !bReadonly ) { SwDrawModel * pDrawDoc = GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel(); if (pDrawDoc) { if( !pDrawDoc->GetOpenInDesignMode() ) break;// don't touch the design mode } } SfxBoolItem aItem( SID_FM_DESIGN_MODE, !bReadonly); GetDispatcher().ExecuteList(SID_FM_DESIGN_MODE, SfxCallMode::ASYNCHRON, { &aItem }); } break; case SfxHintId::SwDrawViewsCreated: { bCallBase = false; if ( GetFormShell() ) { GetFormShell()->SetView(dynamic_cast(GetWrtShell().GetDrawView())); SfxBoolItem aItem( SID_FM_DESIGN_MODE, !GetDocShell()->IsReadOnly()); GetDispatcher().ExecuteList(SID_FM_DESIGN_MODE, SfxCallMode::SYNCHRON, { &aItem }); } } break; case SfxHintId::RedlineChanged: { static sal_uInt16 const aSlotRedLine[] = { FN_REDLINE_ACCEPT_DIRECT, FN_REDLINE_REJECT_DIRECT, FN_REDLINE_NEXT_CHANGE, FN_REDLINE_PREV_CHANGE, FN_REDLINE_ACCEPT_ALL, FN_REDLINE_REJECT_ALL, 0 }; GetViewFrame()->GetBindings().Invalidate(aSlotRedLine); } break; default: break; } } if ( bCallBase ) SfxViewShell::Notify(rBC, rHint); } #if defined(_WIN32) || defined UNX void SwView::ScannerEventHdl() { uno::Reference< XScannerManager2 > xScanMgr = SW_MOD()->GetScannerManager(); if( xScanMgr.is() ) { const ScannerContext aContext( xScanMgr->getAvailableScanners().getConstArray()[ 0 ] ); const ScanError eError = xScanMgr->getError( aContext ); if( ScanError_ScanErrorNone == eError ) { const uno::Reference< awt::XBitmap > xBitmap( xScanMgr->getBitmap( aContext ) ); if( xBitmap.is() ) { const BitmapEx aScanBmp( VCLUnoHelper::GetBitmap( xBitmap ) ); if( !!aScanBmp ) { Graphic aGrf(aScanBmp); m_pWrtShell->Insert( OUString(), OUString(), aGrf ); } } } } SfxBindings& rBind = GetViewFrame()->GetBindings(); rBind.Invalidate( SID_TWAIN_SELECT ); rBind.Invalidate( SID_TWAIN_TRANSFER ); } #endif void SwView::StopShellTimer() { if(m_aTimer.IsActive()) { m_aTimer.Stop(); if ( m_bAttrChgNotifiedWithRegistrations ) { GetViewFrame()->GetBindings().LEAVEREGISTRATIONS(); m_bAttrChgNotifiedWithRegistrations = false; } SelectShell(); m_bAttrChgNotified = false; } } bool SwView::PrepareClose( bool bUI ) { SfxViewFrame* pVFrame = GetViewFrame(); pVFrame->SetChildWindow( SwInputChild::GetChildWindowId(), false ); if( pVFrame->GetDispatcher()->IsLocked() ) pVFrame->GetDispatcher()->Lock(false); if ( m_pFormShell && !m_pFormShell->PrepareClose( bUI ) ) { return false; } return SfxViewShell::PrepareClose( bUI ); } // status methods for clipboard. // Status changes now notified from the clipboard. bool SwView::IsPasteAllowed() { SotExchangeDest nPasteDestination = SwTransferable::GetSotDestination( *m_pWrtShell ); if( m_nLastPasteDestination != nPasteDestination ) { TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( &GetEditWin()) ); if( aDataHelper.GetXTransferable().is() ) { m_bPasteState = SwTransferable::IsPaste( *m_pWrtShell, aDataHelper ); m_bPasteSpecialState = SwTransferable::IsPasteSpecial( *m_pWrtShell, aDataHelper ); } else m_bPasteState = m_bPasteSpecialState = false; if( static_cast(0xFFFF) == m_nLastPasteDestination ) // the init value m_pViewImpl->AddClipboardListener(); m_nLastPasteDestination = nPasteDestination; } return m_bPasteState; } bool SwView::IsPasteSpecialAllowed() { if ( m_pFormShell && m_pFormShell->IsActiveControl() ) return false; SotExchangeDest nPasteDestination = SwTransferable::GetSotDestination( *m_pWrtShell ); if( m_nLastPasteDestination != nPasteDestination ) { TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( &GetEditWin()) ); if( aDataHelper.GetXTransferable().is() ) { m_bPasteState = SwTransferable::IsPaste( *m_pWrtShell, aDataHelper ); m_bPasteSpecialState = SwTransferable::IsPasteSpecial( *m_pWrtShell, aDataHelper ); } else m_bPasteState = m_bPasteSpecialState = false; if( static_cast(0xFFFF) == m_nLastPasteDestination ) // the init value m_pViewImpl->AddClipboardListener(); } return m_bPasteSpecialState; } bool SwView::IsPasteSpreadsheet(bool bHasOwnTableCopied) { TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( &GetEditWin()) ); if( aDataHelper.GetXTransferable().is() ) { if (bHasOwnTableCopied && SwTransferable::IsPasteOwnFormat( aDataHelper )) return true; return aDataHelper.HasFormat( SotClipboardFormatId::SYLK ) || aDataHelper.HasFormat( SotClipboardFormatId::SYLK_BIGCAPS ); } return false; } void SwView::NotifyDBChanged() { GetViewImpl()->GetUNOObject_Impl()->NotifyDBChanged(); } // Printing SfxObjectShellLock SwView::CreateTmpSelectionDoc() { SwXTextView *const pTempImpl = GetViewImpl()->GetUNOObject_Impl(); return pTempImpl->BuildTmpSelectionDoc(); } void SwView::AddTransferable(SwTransferable& rTransferable) { GetViewImpl()->AddTransferable(rTransferable); } namespace sw { void InitPrintOptionsFromApplication(SwPrintData & o_rData, bool const bWeb) { o_rData = *SW_MOD()->GetPrtOptions(bWeb); } } // namespace sw /* vim:set shiftwidth=4 softtabstop=4 expandtab: */