/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #if OSL_DEBUG_LEVEL > 1 #include #endif #include #include namespace vcl { DefaultTextLayout::~DefaultTextLayout() { } long DefaultTextLayout::GetTextWidth( const OUString& _rText, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const { return m_rTargetDevice.GetTextWidth( _rText, _nStartIndex, _nLength ); } void DefaultTextLayout::DrawText( const Point& _rStartPoint, const OUString& _rText, sal_Int32 _nStartIndex, sal_Int32 _nLength, MetricVector* _pVector, OUString* _pDisplayText ) { m_rTargetDevice.DrawText( _rStartPoint, _rText, _nStartIndex, _nLength, _pVector, _pDisplayText ); } void DefaultTextLayout::GetCaretPositions( const OUString& _rText, long* _pCaretXArray, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const { m_rTargetDevice.GetCaretPositions( _rText, _pCaretXArray, _nStartIndex, _nLength ); } sal_Int32 DefaultTextLayout::GetTextBreak( const OUString& _rText, long _nMaxTextWidth, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const { return m_rTargetDevice.GetTextBreak( _rText, _nMaxTextWidth, _nStartIndex, _nLength ); } bool DefaultTextLayout::DecomposeTextRectAction() const { return false; } class ReferenceDeviceTextLayout : public ITextLayout { public: ReferenceDeviceTextLayout( const Control& _rControl, OutputDevice& _rTargetDevice, OutputDevice& _rReferenceDevice ); virtual ~ReferenceDeviceTextLayout(); // ITextLayout virtual long GetTextWidth( const OUString& rStr, sal_Int32 nIndex, sal_Int32 nLen ) const override; virtual void DrawText( const Point& _rStartPoint, const OUString& _rText, sal_Int32 _nStartIndex, sal_Int32 _nLength, MetricVector* _pVector, OUString* _pDisplayText ) override; virtual void GetCaretPositions( const OUString& _rText, long* _pCaretXArray, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const override; virtual sal_Int32 GetTextBreak(const OUString& _rText, long _nMaxTextWidth, sal_Int32 _nStartIndex, sal_Int32 _nLength) const override; virtual bool DecomposeTextRectAction() const override; public: // equivalents to the respective OutputDevice methods, which take the reference device into account tools::Rectangle DrawText( const tools::Rectangle& _rRect, const OUString& _rText, DrawTextFlags _nStyle, MetricVector* _pVector, OUString* _pDisplayText, const Size* i_pDeviceSize ); tools::Rectangle GetTextRect( const tools::Rectangle& _rRect, const OUString& _rText, DrawTextFlags _nStyle, Size* o_pDeviceSize ); private: long GetTextArray( const OUString& _rText, long* _pDXAry, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const; OutputDevice& m_rTargetDevice; OutputDevice& m_rReferenceDevice; const bool m_bRTLEnabled; tools::Rectangle m_aCompleteTextRect; }; ReferenceDeviceTextLayout::ReferenceDeviceTextLayout( const Control& _rControl, OutputDevice& _rTargetDevice, OutputDevice& _rReferenceDevice ) :m_rTargetDevice( _rTargetDevice ) ,m_rReferenceDevice( _rReferenceDevice ) ,m_bRTLEnabled( _rControl.IsRTLEnabled() ) { Font const aUnzoomedPointFont( _rControl.GetUnzoomedControlPointFont() ); const Fraction& aZoom( _rControl.GetZoom() ); m_rTargetDevice.Push( PushFlags::MAPMODE | PushFlags::FONT | PushFlags::TEXTLAYOUTMODE ); MapMode aTargetMapMode( m_rTargetDevice.GetMapMode() ); OSL_ENSURE( aTargetMapMode.GetOrigin() == Point(), "ReferenceDeviceTextLayout::ReferenceDeviceTextLayout: uhm, the code below won't work here ..." ); // normally, controls simulate "zoom" by "zooming" the font. This is responsible for (part of) the discrepancies // between text in Writer and text in controls in Writer, though both have the same font. // So, if we have a zoom set at the control, then we do not scale the font, but instead modify the map mode // to accommodate for the zoom. aTargetMapMode.SetScaleX( aZoom ); // TODO: shouldn't this be "current_scale * zoom"? aTargetMapMode.SetScaleY( aZoom ); // also, use a higher-resolution map unit than "pixels", which should save us some rounding errors when // translating coordinates between the reference device and the target device. OSL_ENSURE( aTargetMapMode.GetMapUnit() == MapUnit::MapPixel, "ReferenceDeviceTextLayout::ReferenceDeviceTextLayout: this class is not expected to work with such target devices!" ); // we *could* adjust all the code in this class to handle this case, but at the moment, it's not necessary const MapUnit eTargetMapUnit = m_rReferenceDevice.GetMapMode().GetMapUnit(); aTargetMapMode.SetMapUnit( eTargetMapUnit ); OSL_ENSURE( aTargetMapMode.GetMapUnit() != MapUnit::MapPixel, "ReferenceDeviceTextLayout::ReferenceDeviceTextLayout: a reference device which has map mode PIXEL?!" ); m_rTargetDevice.SetMapMode( aTargetMapMode ); // now that the Zoom is part of the map mode, reset the target device's font to the "unzoomed" version Font aDrawFont( aUnzoomedPointFont ); aDrawFont.SetFontSize( OutputDevice::LogicToLogic(aDrawFont.GetFontSize(), MapMode(MapUnit::MapPoint), MapMode(eTargetMapUnit)) ); _rTargetDevice.SetFont( aDrawFont ); // transfer font to the reference device m_rReferenceDevice.Push( PushFlags::FONT | PushFlags::TEXTLAYOUTMODE ); Font aRefFont( aUnzoomedPointFont ); aRefFont.SetFontSize( OutputDevice::LogicToLogic( aRefFont.GetFontSize(), MapMode(MapUnit::MapPoint), m_rReferenceDevice.GetMapMode()) ); m_rReferenceDevice.SetFont( aRefFont ); } ReferenceDeviceTextLayout::~ReferenceDeviceTextLayout() { m_rReferenceDevice.Pop(); m_rTargetDevice.Pop(); } namespace { bool lcl_normalizeLength( const OUString& _rText, const sal_Int32 _nStartIndex, sal_Int32& _io_nLength ) { sal_Int32 nTextLength = _rText.getLength(); if ( _nStartIndex > nTextLength ) return false; if ( _nStartIndex + _io_nLength > nTextLength ) _io_nLength = nTextLength - _nStartIndex; return true; } } long ReferenceDeviceTextLayout::GetTextArray( const OUString& _rText, long* _pDXAry, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const { if ( !lcl_normalizeLength( _rText, _nStartIndex, _nLength ) ) return 0; // retrieve the character widths from the reference device long nTextWidth = m_rReferenceDevice.GetTextArray( _rText, _pDXAry, _nStartIndex, _nLength ); #if OSL_DEBUG_LEVEL > 1 if ( _pDXAry ) { OStringBuffer aTrace; aTrace.append( "ReferenceDeviceTextLayout::GetTextArray( " ); aTrace.append( OUStringToOString( _rText, RTL_TEXTENCODING_UTF8 ) ); aTrace.append( " ): " ); aTrace.append( nTextWidth ); aTrace.append( " = ( " ); for ( sal_Int32 i=0; i<_nLength; ) { aTrace.append( _pDXAry[i] ); if ( ++i < _nLength ) aTrace.append( ", " ); } aTrace.append( ")" ); SAL_INFO( "vcl", aTrace.makeStringAndClear() ); } #endif return nTextWidth; } long ReferenceDeviceTextLayout::GetTextWidth( const OUString& _rText, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const { return GetTextArray( _rText, nullptr, _nStartIndex, _nLength ); } void ReferenceDeviceTextLayout::DrawText( const Point& _rStartPoint, const OUString& _rText, sal_Int32 _nStartIndex, sal_Int32 _nLength, MetricVector* _pVector, OUString* _pDisplayText ) { if ( !lcl_normalizeLength( _rText, _nStartIndex, _nLength ) ) return; if ( _pVector && _pDisplayText ) { MetricVector aGlyphBounds; m_rReferenceDevice.GetGlyphBoundRects( _rStartPoint, _rText, _nStartIndex, _nLength, aGlyphBounds ); ::std::copy( aGlyphBounds.begin(), aGlyphBounds.end(), ::std::insert_iterator< MetricVector > ( *_pVector, _pVector->end() ) ); *_pDisplayText += _rText.copy( _nStartIndex, _nLength ); return; } std::unique_ptr pCharWidths(new long[ _nLength ]); long nTextWidth = GetTextArray( _rText, pCharWidths.get(), _nStartIndex, _nLength ); m_rTargetDevice.DrawTextArray( _rStartPoint, _rText, pCharWidths.get(), _nStartIndex, _nLength ); pCharWidths.reset(); m_aCompleteTextRect.Union( tools::Rectangle( _rStartPoint, Size( nTextWidth, m_rTargetDevice.GetTextHeight() ) ) ); } void ReferenceDeviceTextLayout::GetCaretPositions( const OUString& _rText, long* _pCaretXArray, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const { if ( !lcl_normalizeLength( _rText, _nStartIndex, _nLength ) ) return; // retrieve the caret positions from the reference device m_rReferenceDevice.GetCaretPositions( _rText, _pCaretXArray, _nStartIndex, _nLength ); } sal_Int32 ReferenceDeviceTextLayout::GetTextBreak( const OUString& _rText, long _nMaxTextWidth, sal_Int32 _nStartIndex, sal_Int32 _nLength ) const { if ( !lcl_normalizeLength( _rText, _nStartIndex, _nLength ) ) return 0; return m_rReferenceDevice.GetTextBreak( _rText, _nMaxTextWidth, _nStartIndex, _nLength ); } bool ReferenceDeviceTextLayout::DecomposeTextRectAction() const { return true; } tools::Rectangle ReferenceDeviceTextLayout::DrawText( const tools::Rectangle& _rRect, const OUString& _rText, DrawTextFlags _nStyle, MetricVector* _pVector, OUString* _pDisplayText, const Size* i_pDeviceSize ) { if ( _rText.isEmpty() ) return tools::Rectangle(); // determine text layout mode from the RTL-ness of the control whose text we render ComplexTextLayoutFlags nTextLayoutMode = m_bRTLEnabled ? ComplexTextLayoutFlags::BiDiRtl : ComplexTextLayoutFlags::Default; m_rReferenceDevice.SetLayoutMode( nTextLayoutMode ); m_rTargetDevice.SetLayoutMode( nTextLayoutMode | ComplexTextLayoutFlags::TextOriginLeft ); // ComplexTextLayoutFlags::TextOriginLeft is because when we do actually draw the text (in DrawText( Point, ... )), then // our caller gives us the left border of the draw position, regardless of script type, text layout, // and the like in our ctor, we set the map mode of the target device from pixel to twip, but our caller doesn't know this, // but passed pixel coordinates. So, adjust the rect. tools::Rectangle aRect( m_rTargetDevice.PixelToLogic( _rRect ) ); if (i_pDeviceSize) { //if i_pDeviceSize is passed in here, it was the original pre logic-to-pixel size of _rRect SAL_WARN_IF(std::abs(_rRect.GetSize().Width() - m_rTargetDevice.LogicToPixel(*i_pDeviceSize).Width()) > 1, "vcl", "DeviceSize width was expected to match Pixel width"); SAL_WARN_IF(std::abs(_rRect.GetSize().Height() - m_rTargetDevice.LogicToPixel(*i_pDeviceSize).Height()) > 1, "vcl", "DeviceSize height was expected to match Pixel height"); aRect.SetSize(*i_pDeviceSize); } m_aCompleteTextRect.SetEmpty(); m_rTargetDevice.DrawText( aRect, _rText, _nStyle, _pVector, _pDisplayText, this ); tools::Rectangle aTextRect = m_aCompleteTextRect; if ( aTextRect.IsEmpty() && !aRect.IsEmpty() ) { // this happens for instance if we're in a PaintToDevice call, where only a MetaFile is recorded, // but no actual painting happens, so our "DrawText( Point, ... )" is never called // In this case, calculate the rect from what OutputDevice::GetTextRect would give us. This has // the disadvantage of less accuracy, compared with the approach to calculate the rect from the // single "DrawText( Point, ... )" calls, since more intermediate arithmetic will translate // from ref- to target-units. aTextRect = m_rTargetDevice.GetTextRect( aRect, _rText, _nStyle, nullptr, this ); } // similar to above, the text rect now contains TWIPs (or whatever unit the ref device has), but the caller // expects pixel coordinates aTextRect = m_rTargetDevice.LogicToPixel( aTextRect ); // convert the metric vector if ( _pVector ) { for ( auto& rCharRect : *_pVector ) { rCharRect = m_rTargetDevice.LogicToPixel( rCharRect ); } } return aTextRect; } tools::Rectangle ReferenceDeviceTextLayout::GetTextRect( const tools::Rectangle& _rRect, const OUString& _rText, DrawTextFlags _nStyle, Size* o_pDeviceSize ) { if ( _rText.isEmpty() ) return tools::Rectangle(); // determine text layout mode from the RTL-ness of the control whose text we render ComplexTextLayoutFlags nTextLayoutMode = m_bRTLEnabled ? ComplexTextLayoutFlags::BiDiRtl : ComplexTextLayoutFlags::Default; m_rReferenceDevice.SetLayoutMode( nTextLayoutMode ); m_rTargetDevice.SetLayoutMode( nTextLayoutMode | ComplexTextLayoutFlags::TextOriginLeft ); // ComplexTextLayoutFlags::TextOriginLeft is because when we do actually draw the text (in DrawText( Point, ... )), then // our caller gives us the left border of the draw position, regardless of script type, text layout, // and the like in our ctor, we set the map mode of the target device from pixel to twip, but our caller doesn't know this, // but passed pixel coordinates. So, adjust the rect. tools::Rectangle aRect( m_rTargetDevice.PixelToLogic( _rRect ) ); tools::Rectangle aTextRect = m_rTargetDevice.GetTextRect( aRect, _rText, _nStyle, nullptr, this ); //if o_pDeviceSize is available, stash the pre logic-to-pixel size in it if (o_pDeviceSize) { *o_pDeviceSize = aTextRect.GetSize(); } // similar to above, the text rect now contains TWIPs (or whatever unit the ref device has), but the caller // expects pixel coordinates aTextRect = m_rTargetDevice.LogicToPixel( aTextRect ); return aTextRect; } ControlTextRenderer::ControlTextRenderer( const Control& _rControl, OutputDevice& _rTargetDevice, OutputDevice& _rReferenceDevice ) :m_pImpl( new ReferenceDeviceTextLayout( _rControl, _rTargetDevice, _rReferenceDevice ) ) { } ControlTextRenderer::~ControlTextRenderer() { } tools::Rectangle ControlTextRenderer::DrawText( const tools::Rectangle& _rRect, const OUString& _rText, DrawTextFlags _nStyle, MetricVector* _pVector, OUString* _pDisplayText, const Size* i_pDeviceSize ) { return m_pImpl->DrawText( _rRect, _rText, _nStyle, _pVector, _pDisplayText, i_pDeviceSize ); } tools::Rectangle ControlTextRenderer::GetTextRect( const tools::Rectangle& _rRect, const OUString& _rText, DrawTextFlags _nStyle, Size* o_pDeviceSize = nullptr ) { return m_pImpl->GetTextRect( _rRect, _rText, _nStyle, o_pDeviceSize ); } } // namespace vcl /* vim:set shiftwidth=4 softtabstop=4 expandtab: */