# # This file is part of the LibreOffice project. # # This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. # # This file incorporates work covered by the following license notice: # # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed # with this work for additional information regarding copyright # ownership. The ASF licenses this file to you under the Apache # License, Version 2.0 (the "License; you may not use this file # except in compliance with the License. You may obtain a copy of # the License at http://www.apache.org/licenses/LICENSE-2.0 . # # x-no-translate # # resources.properties # # resources for com.sun.star.wizards # RID_COMMON_0=The directory '%1' could not be created.
There may not be enough space left on your hard disk. RID_COMMON_1=The text document could not be created.
Please check if the module 'PRODUCTNAME Writer' is installed. RID_COMMON_2=The spreadsheet could not be created.
Please check if the module 'PRODUCTNAME Calc' is installed. RID_COMMON_3=The presentation could not be created.
Please check if the module 'PRODUCTNAME Impress' is installed. RID_COMMON_4=The drawing could not be created.
Please check if the module 'PRODUCTNAME Draw' is installed. RID_COMMON_5=The formula could not be created.
Please check if the module 'PRODUCTNAME Math' is installed. RID_COMMON_6=The files required could not be found.
Please start the %PRODUCTNAME Setup and choose 'Repair'. RID_COMMON_7=The file '' already exists.

Would you like to overwrite the existing file? RID_COMMON_8=Yes RID_COMMON_9=Yes to All RID_COMMON_10=No RID_COMMON_11=Cancel RID_COMMON_12=~Finish RID_COMMON_13=< ~Back RID_COMMON_14=~Next > RID_COMMON_15=~Help RID_COMMON_16=Steps RID_COMMON_17=Close RID_COMMON_18=OK RID_COMMON_19=The file already exists. Do you want to overwrite it? RID_COMMON_20=Template created via on . RID_COMMON_21=The wizard could not be run, because important files were not found.\nUnder 'Tools - Options - %PRODUCTNAME - Paths' click the 'Default' button to reset the paths to the original default settings.\nThen run the wizard again. RID_REPORT_0=Report Wizard RID_REPORT_3=~Table RID_REPORT_4=Colu~mns RID_REPORT_7=Report_ RID_REPORT_8=- undefined - RID_REPORT_9=~Fields in report RID_REPORT_11=Grouping RID_REPORT_12=Sort options RID_REPORT_13=Choose layout RID_REPORT_14=Create report RID_REPORT_15=Layout of data RID_REPORT_16=Layout of headers and footers RID_REPORT_19=Fields RID_REPORT_20=~Sort by RID_REPORT_21=T~hen by RID_REPORT_22=Orientation RID_REPORT_23=Portrait RID_REPORT_24=Landscape RID_REPORT_28=Which fields do you want to have in your report? RID_REPORT_29=Do you want to add grouping levels? RID_REPORT_30=According to which fields do you want to sort the data? RID_REPORT_31=How do you want your report to look? RID_REPORT_32=Decide how you want to proceed RID_REPORT_33=Title of report RID_REPORT_34=Display report RID_REPORT_35=Create report RID_REPORT_36=Ascending RID_REPORT_37=Descending RID_REPORT_40=~Dynamic report RID_REPORT_41=~Create report now RID_REPORT_42=~Modify report layout RID_REPORT_43=Static report RID_REPORT_44=Save as RID_REPORT_50=Groupings RID_REPORT_51=Then b~y RID_REPORT_52=~Then by RID_REPORT_53=Asc~ending RID_REPORT_54=Ascend~ing RID_REPORT_55=Ascendin~g RID_REPORT_56=De~scending RID_REPORT_57=Des~cending RID_REPORT_58=De~scending RID_REPORT_60=Binary fields cannot be displayed in the report. RID_REPORT_61=The table '' does not exist. RID_REPORT_62=Creating Report... RID_REPORT_63=Number of records inserted: RID_REPORT_64=The form '' does not exist. RID_REPORT_65=The query with the statement
''
could not be run.
Check your data source. RID_REPORT_66=The following hidden control in the form '' could not be read: ''. RID_REPORT_67=Importing data... RID_REPORT_68=Labeling fields RID_REPORT_69=How do you want to label the fields? RID_REPORT_70=Label RID_REPORT_71=Field RID_REPORT_72=An error occurred in the wizard.
The template '%PATH' could be erroneous.
Either the required sections or tables do not exist or exist under the wrong name.
See the Help for more detailed information.
Please select another template. RID_REPORT_73=There is an invalid user field in a table. RID_REPORT_74=The sort criterion '' was chosen twice. Each criterion can only be chosen once. RID_REPORT_75=Note: The dummy text will be replaced by data from the database when the report is created. RID_REPORT_76=A report '%REPORTNAME' already exists in the database. Please assign another name. RID_REPORT_78=How do you want to proceed after creating the report? RID_REPORT_79=What kind of report do you want to create? RID_REPORT_80=Tabular RID_REPORT_81=Columnar, single-column RID_REPORT_82=Columnar, two columns RID_REPORT_83=Columnar, three columns RID_REPORT_84=In blocks, labels left RID_REPORT_85=In blocks, labels above RID_REPORT_86=Title: RID_REPORT_87=Author: RID_REPORT_88=Date: # Please don't translate the words #page# and #count#, these are placeholders. RID_REPORT_89=Page #page# of #count# RID_REPORT_90=Page number: RID_REPORT_91=Page count: RID_REPORT_92=No valid report template was found. RID_REPORT_93=Page: RID_REPORT_94=Align Left - Border RID_REPORT_95=Align Left - Compact RID_REPORT_96=Align Left - Elegant RID_REPORT_97=Align Left - Highlighted RID_REPORT_98=Align Left - Modern RID_REPORT_99=Align Left - Red & Blue RID_REPORT_100=Default RID_REPORT_101=Outline - Borders RID_REPORT_102=Outline - Compact RID_REPORT_103=Outline - Elegant RID_REPORT_104=Outline - Highlighted RID_REPORT_105=Outline - Modern RID_REPORT_106=Outline - Red & Blue RID_REPORT_107=Outline, indented - Borders RID_REPORT_108=Outline, indented - Compact RID_REPORT_109=Outline, indented - Elegant RID_REPORT_110=Outline, indented - Highlighted RID_REPORT_111=Outline, indented - Modern RID_REPORT_112=Outline, indented - Red & Blue RID_REPORT_113=Bubbles RID_REPORT_114=Cinema RID_REPORT_115=Controlling RID_REPORT_116=Default RID_REPORT_117=Drafting RID_REPORT_118=Finances RID_REPORT_119=Flipchart RID_REPORT_120=Formal with Company Logo RID_REPORT_121=Generic RID_REPORT_122=Worldmap RID_DB_COMMON_0=C~reate RID_DB_COMMON_1=~Cancel RID_DB_COMMON_2=< ~Back RID_DB_COMMON_3=~Next > RID_DB_COMMON_4=~Database RID_DB_COMMON_5=~Table name RID_DB_COMMON_6=An error occurred while running the wizard. The wizard will be terminated. RID_DB_COMMON_8=No database has been installed. At least one database is required before the wizard for forms can be started. RID_DB_COMMON_9=The database does not contain any tables. RID_DB_COMMON_10=This title already exists in the database. Please enter another name. RID_DB_COMMON_11=The title must not contain any spaces or special characters. RID_DB_COMMON_12=The database service (com.sun.data.DatabaseEngine) could not be instantiated. RID_DB_COMMON_13=The selected table or query could not be opened. RID_DB_COMMON_14=No connection to the database could be established. RID_DB_COMMON_20=~Help RID_DB_COMMON_21=~Stop RID_DB_COMMON_30=The document could not be saved. RID_DB_COMMON_33=Exiting the wizard RID_DB_COMMON_34=Connecting to data source... RID_DB_COMMON_35=The connection to the data source could not be established. RID_DB_COMMON_36=The file path entered is not valid. RID_DB_COMMON_37=Please select a data source RID_DB_COMMON_38=Please select a table or query RID_DB_COMMON_39=Add field RID_DB_COMMON_40=Remove field RID_DB_COMMON_41=Add all fields RID_DB_COMMON_42=Remove all fields RID_DB_COMMON_43=Move field up RID_DB_COMMON_44=Move field down RID_DB_COMMON_45=The field names from '%NAME' could not be retrieved. RID_QUERY_0=Query Wizard RID_QUERY_1=Query RID_QUERY_2=Query Wizard RID_QUERY_3=~Tables RID_QUERY_4=A~vailable fields RID_QUERY_5=Name ~of the query RID_QUERY_6=Display ~Query RID_QUERY_7=~Modify Query RID_QUERY_8=~How do you want to proceed after creating the query? RID_QUERY_9=Match ~all of the following RID_QUERY_10=~Match any of the following RID_QUERY_11=~Detailed query (Shows all records of the query.) RID_QUERY_12=~Summary query (Shows only results of aggregate functions.) RID_QUERY_16=Aggregate functions RID_QUERY_17=Fields RID_QUERY_18=~Group by RID_QUERY_19=Field RID_QUERY_20=Alias RID_QUERY_21=Table: RID_QUERY_22=Query: RID_QUERY_24=Condition RID_QUERY_25=Value RID_QUERY_26=is equal to RID_QUERY_27=is not equal to RID_QUERY_28=is smaller than RID_QUERY_29=is greater than RID_QUERY_30=is equal or less than RID_QUERY_31=is equal or greater than RID_QUERY_32=like RID_QUERY_33=not like RID_QUERY_34=is null RID_QUERY_35=is not null RID_QUERY_36=true RID_QUERY_37=false RID_QUERY_38=and RID_QUERY_39=or RID_QUERY_40=get the sum of RID_QUERY_41=get the average of RID_QUERY_42=get the minimum of RID_QUERY_43=get the maximum of RID_QUERY_44=get the count of RID_QUERY_48=(none) RID_QUERY_50=Fie~lds in the Query: RID_QUERY_51=Sorting order: RID_QUERY_52=No sorting fields were assigned. RID_QUERY_53=Search conditions: RID_QUERY_54=No conditions were assigned. RID_QUERY_55=Aggregate functions: RID_QUERY_56=No aggregate functions were assigned. RID_QUERY_57=Grouped by: RID_QUERY_58=No Groups were assigned. RID_QUERY_59=Grouping conditions: RID_QUERY_60=No grouping conditions were assigned. RID_QUERY_70=Select the fields (columns) for your query RID_QUERY_71=Select the sorting order RID_QUERY_72=Select the search conditions RID_QUERY_73=Select the type of query RID_QUERY_74=Select the groups RID_QUERY_75=Select the grouping conditions RID_QUERY_76=Assign aliases if desired RID_QUERY_77=Check the overview and decide how to proceed RID_QUERY_80=Field selection RID_QUERY_81=Sorting order RID_QUERY_82=Search conditions RID_QUERY_83=Detail or summary RID_QUERY_84=Grouping RID_QUERY_85=Grouping conditions RID_QUERY_86=Aliases RID_QUERY_87=Overview RID_QUERY_88=A field that has not been assigned an aggregate function must be used in a group. RID_QUERY_89=The condition ' ' was chosen twice. Each condition can only be chosen once RID_QUERY_90=The aggregate function has been assigned twice to the fieldname ''. RID_QUERY_91=, RID_QUERY_92= () RID_QUERY_93= () RID_QUERY_94= RID_QUERY_95= RID_QUERY_96= RID_FORM_0=Form Wizard RID_FORM_1=Fields in ~the form RID_FORM_2=Binary fields are always listed and selectable from the left list.\nIf possible, they are interpreted as images. RID_FORM_3=A subform is a form that is inserted in another form.\nUse subforms to show data from tables or queries with a one-to-many relationship. RID_FORM_4=~Add Subform RID_FORM_5=~Subform based on existing relation RID_FORM_6=Tables or queries RID_FORM_7=Subform based on ~manual selection of fields RID_FORM_8=~Which relation do you want to add? RID_FORM_9=Fields in the ~subform RID_FORM_12=~Available fields RID_FORM_13=Fields in form RID_FORM_19=The join '' and '' has been selected twice.\nBut joins may only be used once. RID_FORM_20=~First joined subform field RID_FORM_21=~Second joined subform field RID_FORM_22=~Third joined subform field RID_FORM_23=~Fourth joined subform field RID_FORM_24=F~irst joined main form field RID_FORM_25=S~econd joined main form field RID_FORM_26=T~hird joined main form field RID_FORM_27=F~ourth joined main form field RID_FORM_28=Field border RID_FORM_29=No border RID_FORM_30=3D look RID_FORM_31=Flat RID_FORM_32=Label placement RID_FORM_33=Align left RID_FORM_34=Align right RID_FORM_35=Arrangement of DB fields RID_FORM_36=Columnar - Labels Left RID_FORM_37=Columnar - Labels on Top RID_FORM_38=In Blocks - Labels Left RID_FORM_39=In Blocks - Labels Above RID_FORM_40=As Data Sheet RID_FORM_41=Arrangement of the main form RID_FORM_42=Arrangement of the subform RID_FORM_44=The form is to be ~used for entering new data only. RID_FORM_45=Existing data will not be displayed RID_FORM_46=T~he form is to display all data RID_FORM_47=Do not allow ~modification of existing data RID_FORM_48=Do not allow ~deletion of existing data RID_FORM_49=Do not allow ~addition of new data RID_FORM_50=Name of ~the form RID_FORM_51=How do you want to proceed after creating the form? RID_FORM_52=~Work with the form RID_FORM_53=~Modify the form RID_FORM_55=~Page Styles RID_FORM_80=Field selection RID_FORM_81=Set up a subform RID_FORM_82=Add subform fields RID_FORM_83=Get joined fields RID_FORM_84=Arrange controls RID_FORM_85=Set data entry RID_FORM_86=Apply styles RID_FORM_87=Set name RID_FORM_88=(Date) RID_FORM_89=(Time) RID_FORM_90=Select the fields of your form RID_FORM_91=Decide if you want to set up a subform RID_FORM_92=Select the fields of your subform RID_FORM_93=Select the joins between your forms RID_FORM_94=Arrange the controls on your form RID_FORM_95=Select the data entry mode RID_FORM_96=Apply the style of your form RID_FORM_97=Set the name of the form RID_FORM_98=A form with the name '%FORMNAME' already exists.\nChoose another name. RID_TABLE_1=Table Wizard RID_TABLE_2=Select fields RID_TABLE_3=Set types and formats RID_TABLE_4=Set primary key RID_TABLE_5=Create table RID_TABLE_8=Select fields for your table RID_TABLE_9=Set field types and formats RID_TABLE_10=Set primary key RID_TABLE_11=Create table RID_TABLE_14=This wizard helps you to create a table for your database. After selecting a table category and a sample table, choose the fields you want to include in your table. You can include fields from more than one sample table. RID_TABLE_15=Ca~tegory RID_TABLE_16=B~usiness RID_TABLE_17=P~ersonal RID_TABLE_18=~Sample tables RID_TABLE_19=A~vailable fields RID_TABLE_20=Field information RID_TABLE_21=+ RID_TABLE_22=- RID_TABLE_23=Field name RID_TABLE_24=Field type RID_TABLE_25=~Selected fields RID_TABLE_26=A primary key uniquely identifies each record in a database table. Primary keys ease the linking of information in separate tables, and it is recommended that you have a primary key in every table. Without a primary key, it will not be possible to enter data into this table. RID_TABLE_27=~Create a primary key RID_TABLE_28=~Automatically add a primary key RID_TABLE_29=~Use an existing field as a primary key RID_TABLE_30=Define p~rimary key as a combination of several fields RID_TABLE_31=F~ieldname RID_TABLE_32=~Primary key fields RID_TABLE_33=Auto ~value RID_TABLE_34=What do you want to name your table? RID_TABLE_35=Congratulations. You have entered all the information needed to create your table. RID_TABLE_36=What do you want to do next? RID_TABLE_37=Modify the table design RID_TABLE_38=Insert data immediately RID_TABLE_39=C~reate a form based on this table RID_TABLE_40=The table you have created could not be opened. RID_TABLE_41=The table name '%TABLENAME' contains a character ('%SPECIALCHAR') that might not be supported by the database. RID_TABLE_42=The field name '%FIELDNAME' contains a special character ('%SPECIALCHAR') that might not be supported by the database. RID_TABLE_43=Field RID_TABLE_44=MyTable RID_TABLE_45=Add a Field RID_TABLE_46=Remove the selected Field RID_TABLE_47=The field cannot be inserted because this would exceed the maximum number of %COUNT possible fields in the database table RID_TABLE_48=The name '%TABLENAME' already exists.\nPlease enter another name. RID_TABLE_49=Catalog of the table RID_TABLE_50=Schema of the table RID_TABLE_51=The field '%FIELDNAME' already exists. STEP_ZERO_0=~Cancel STEP_ZERO_1=~Help STEP_ZERO_2=< ~Back STEP_ZERO_3=~Convert STEP_ZERO_4=Note: Currency amounts from external links and currency conversion factors in formulas cannot be converted. STEP_ZERO_5=First, unprotect all sheets. STEP_ZERO_6=Currencies: STEP_ZERO_7=C~ontinue > STEP_ZERO_8=C~lose STEP_CONVERTER_0=~Entire document STEP_CONVERTER_1=Selection STEP_CONVERTER_2=Cell S~tyles STEP_CONVERTER_3=Currency cells in the current ~sheet STEP_CONVERTER_4=Currency cells in the entire ~document STEP_CONVERTER_5=~Selected range STEP_CONVERTER_6=Select Cell Styles STEP_CONVERTER_7=Select currency cells STEP_CONVERTER_8=Currency ranges: STEP_CONVERTER_9=Templates: STEP_AUTOPILOT_0=Extent STEP_AUTOPILOT_1=~Single %PRODUCTNAME Calc document STEP_AUTOPILOT_2=Complete ~directory STEP_AUTOPILOT_3=Source Document: STEP_AUTOPILOT_4=Source directory: STEP_AUTOPILOT_5=~Including subfolders STEP_AUTOPILOT_6=Target directory: STEP_AUTOPILOT_7=Temporarily unprotect sheet without query STEP_AUTOPILOT_10=Also convert fields and tables in text documents STATUSLINE_0=Conversion status: STATUSLINE_1=Conversion status of the cell templates: STATUSLINE_2=Registration of the relevant ranges: Sheet %1Number%1 of %2TotPageCount%2 STATUSLINE_3=Entry of the ranges to be converted... STATUSLINE_4=Sheet protection for each sheet will be restored... STATUSLINE_5=Conversion of the currency units in the cell templates... MESSAGES_0=~Finish MESSAGES_1=Select directory MESSAGES_2=Select file MESSAGES_3=Select target directory MESSAGES_4=non-existent MESSAGES_5=Euro Converter MESSAGES_6=Should protected spreadsheets be temporarily unprotected? MESSAGES_7=Enter the password to unprotect the table %1TableName%1 MESSAGES_8=Wrong Password! MESSAGES_9=Protected Sheet MESSAGES_10=Warning! MESSAGES_11=Protection for the sheets will not be removed. MESSAGES_12=Sheet cannot be unprotected MESSAGES_13=The Wizard cannot edit this document as cell formats cannot be modified in documents containing protected spreadsheets. MESSAGES_14=Please note that the Euro Converter will, otherwise, not be able to edit this document! MESSAGES_15=Please choose a currency to be converted first! MESSAGES_16=Password: MESSAGES_17=OK MESSAGES_18=Cancel MESSAGES_19=Please select a %PRODUCTNAME Calc document for editing! MESSAGES_20='<1>' is not a directory! MESSAGES_21=Document is read-only! MESSAGES_22=The '<1>' file already exists.Do you want to overwrite it? MESSAGES_23=Do you really want to terminate conversion at this point? MESSAGES_24=Cancel Wizard CURRENCIES_0=Portuguese Escudo CURRENCIES_1=Dutch Guilder CURRENCIES_2=French Franc CURRENCIES_3=Spanish Peseta CURRENCIES_4=Italian Lira CURRENCIES_5=German Mark CURRENCIES_6=Belgian Franc CURRENCIES_7=Irish Punt CURRENCIES_8=Luxembourg Franc CURRENCIES_9=Austrian Schilling CURRENCIES_10=Finnish Mark CURRENCIES_11=Greek Drachma CURRENCIES_12=Slovenian Tolar CURRENCIES_13=Cypriot Pound CURRENCIES_14=Maltese Lira CURRENCIES_15=Slovak Koruna CURRENCIES_16=Estonian Kroon CURRENCIES_17=Latvian Lats CURRENCIES_18=Lithuanian Litas STEP_LASTPAGE_0=Progress STEP_LASTPAGE_1=Retrieving the relevant documents... STEP_LASTPAGE_2=Converting the documents... STEP_LASTPAGE_3=Settings: STEP_LASTPAGE_4=Sheet is always unprotected STYLES_0=Theme Selection STYLES_1=Error while saving the document to the clipboard! The following action cannot be undone. STYLES_2=~Cancel STYLES_3=~OK STYLENAME_0=(Standard) STYLENAME_1=Autumn Leaves STYLENAME_2=Be STYLENAME_3=Black and White STYLENAME_4=Blackberry Bush STYLENAME_5=Blue Jeans STYLENAME_6=Fifties Diner STYLENAME_7=Glacier STYLENAME_8=Green Grapes STYLENAME_9=Marine STYLENAME_10=Millennium STYLENAME_11=Nature STYLENAME_12=Neon STYLENAME_13=Night STYLENAME_14=PC Nostalgia STYLENAME_15=Pastel STYLENAME_16=Pool Party STYLENAME_17=Pumpkin CorrespondenceDialog_0=Addressee CorrespondenceDialog_1=One recipient CorrespondenceDialog_2=Several recipients (address database) CorrespondenceDialog_3=Use of This Template CorrespondenceMsgError=An error has occurred. CorrespondenceFields_0=Click placeholder and overwrite CorrespondenceFields_1=Company CorrespondenceFields_2=Department CorrespondenceFields_3=First Name CorrespondenceFields_4=Last Name CorrespondenceFields_5=Street CorrespondenceFields_6=Country CorrespondenceFields_7=ZIP/Postal Code CorrespondenceFields_8=City CorrespondenceFields_9=Title CorrespondenceFields_10=Position CorrespondenceFields_11=Form of Address CorrespondenceFields_12=Initials CorrespondenceFields_13=Salutation CorrespondenceFields_14=Home Phone CorrespondenceFields_15=Work Phone CorrespondenceFields_16=Fax CorrespondenceFields_17=E-Mail CorrespondenceFields_18=URL CorrespondenceFields_19=Notes CorrespondenceFields_20=Alt. Field 1 CorrespondenceFields_21=Alt. Field 2 CorrespondenceFields_22=Alt. Field 3 CorrespondenceFields_23=Alt. Field 4 CorrespondenceFields_24=ID CorrespondenceFields_25=State CorrespondenceFields_26=Office Phone CorrespondenceFields_27=Pager CorrespondenceFields_28=Mobile Phone CorrespondenceFields_29=Other Phone CorrespondenceFields_30=Calendar URL CorrespondenceFields_31=Invite CorrespondenceNoTextmark_0=The bookmark 'Recipient' is missing. CorrespondenceNoTextmark_1=Form letter fields can not be included. AgendaDlgName=Minutes Template AgendaDlgNoCancel=An option must be confirmed. AgendaDlgFrame=Minutes Type AgendaDlgButton1=Results Minutes AgendaDlgButton2=Evaluation Minutes TextField=User data field is not defined! NoDirCreation=The '%1' directory cannot be created: MsgDirNotThere=The '%1' directory does not exist. QueryfornewCreation=Do you want to create it now? HelpButton=~Help CancelButton=~Cancel BackButton=< ~Back NextButton=Ne~xt > BeginButton=~Convert CloseButton=~Close WelcometextLabel1=This wizard convert legacy format documents to Open Document Format for Office Applications. WelcometextLabel3=Select the document type for conversion: MSTemplateCheckbox_1_=Word templates MSTemplateCheckbox_2_=Excel templates MSTemplateCheckbox_3_=PowerPoint templates MSDocumentCheckbox_1_=Word documents MSDocumentCheckbox_2_=Excel documents MSDocumentCheckbox_3_=PowerPoint/Publisher documents MSContainerName=Microsoft Office SummaryHeader=Summary: GroupnameDefault=Imported_Templates ProgressMoreDocs=Documents ProgressMoreTemplates=Templates FileExists=The '<1>' file already exists.Do you want to overwrite it? MorePathsError3=Directories do not exist ConvertError1=Do you really want to terminate conversion at this point? ConvertError2=Cancel Wizard RTErrorDesc=An error has occurred in the wizard. RTErrorHeader=Error OverwriteallFiles=Do you want to overwrite documents without being asked? ReeditMacro=Document macro has to be revised. CouldNotsaveDocument=Document '<1>' could not be saved. CouldNotopenDocument=Document '<1>' could not be opened. PathDialogMessage=Select a directory DialogTitle=Document Converter SearchInSubDir=Including subdirectories ProgressPage1=Progress ProgressPage2=Retrieving the relevant documents: ProgressPage3=Converting the documents ProgressFound=Found: ProgressPage5="%1 found Ready=Finished SourceDocuments=Source documents TargetDocuments=Target documents LogfileSummary= documents converted SumInclusiveSubDir=All subdirectories will be taken into account SumSaveDokumente=These will be exported to the following directory: TextImportLabel=Import from: TextExportLabel=Save to: CreateLogfile=Create log file LogfileHelpText=A log file will be created in your work directory ShowLogfile=Show log file SumMSTextDocuments=All Word documents contained in the following directory will be imported: SumMSTableDocuments=All Excel documents contained in the following directory will be imported: SumMSDrawDocuments=All PowerPoint/Publisher documents contained in the following directory will be imported: SumMSTextTemplates=All Word templates contained in the following directory will be imported: SumMSTableTemplates=All Excel templates contained in the following directory will be imported: SumMSDrawTemplates=All PowerPoint templates contained in the following directory will be imported: